[Pkg-hpijs-devel] Bug#490212: hplip: wrong placing of hp-systray icons on kde4

Eric Valette eric.valette at free.fr
Thu Jul 10 19:05:00 UTC 2008


Package: hplip
Version: 2.8.6-1
Severity: minor

Fo some reasons, this systray applet  is wrongly located when other are
still at they normal place (Krandrtray, kmix, korganizer, ...)

So I do not konw if the bug is in the hplip python code or kde code but
it is annoying.

-- Package-specific info:
warning: Invalid ppd_dir value: None
error: SIP not installed or version not found.
note: For troubleshooting printing issues, it is best to have the CUPS 'LogLevel'
note: set to 'debug'. To set the LogLevel to debug, edit the file /etc/cups/cupsd.conf (as root),
note: and change the line near the top of the file that begins with 'LogLevel' to read:
note: LogLevel debug
note: Save the file and then restart CUPS (see your OS/distro docs on how to restart CUPS).
note: Now, when you print, helpful debug information will be saved to the file:
note: /var/log/cups/error_log
note: You can monitor this file by running this command in a console/shell:
note: tail -f /var/log/cups/error_log
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
error: 'ppdev' kernel module not loaded.

HP Linux Imaging and Printing System (ver. 2.8.6)
Dependency/Version Check Utility ver. 14.0

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or  
.run) to determine if the proper dependencies are installed to successfully compile HPLIP.                           
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an
already built HPLIP supplied tarball has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both
compile- and run-time dependencies).                                                                                 

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux tri-yann3 2.6.26-rc9 #1 SMP PREEMPT Sun Jul 6 10:30:02 CEST 2008 x86_64 GNU/Linux

Distribution:
debian unstable

HPOJ running?
No, HPOJ is not running (OK).

Checking Python version...
OK, version 2.5.2 installed

Checking PyQt version...
OK, version 3.17 installed.

Checking SIP version...

Checking for CUPS...
Status: l?ordonnanceur tourne
Version: 1.3.7
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.82.4


------------------------
| RUNTIME DEPENDENCIES |
------------------------


Checking for dependency: cups - Common Unix Printing System...
OK, found.

Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: ppdev - Parallel port support kernel module....

Checking for dependency: PyQt - Qt interface for Python...
OK, found.

Checking for dependency: python-ctypes - A foreign function library for Python...
OK, found.

Checking for dependency: python-dbus - Python bindings for dbus...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 2.8.6 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=2.8.6

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
internal-tag=2.8.6.20


-------------------------------
| DISCOVERED PARALLEL DEVICES |
-------------------------------

No devices found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                                      Model                    
  ----------------------------------------------  -------------------------
  hp:/usb/Phowarning: No queues found.
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.d/dll.conf).
error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the proper installation of scanext.
error: 4 errors and/or warnings.
tosmart_8200_series?serial=MY5CA3X0  HP Photosmart 8200 series
  2G04KJ                                                                   

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------



----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...

-----------------
| USB I/O SETUP |
-----------------


Checking for permissions of USB attached printers...

HP Device 0xc202 at 001:008: 
    Device URI: hp:/usb/Photosmart_8200_series?serial=MY5CA3X02G04KJ
    Device node: /dev/bus/usb/001/008
    Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/008
# owner: lp
# group: scanner
user::rw-
group::rw-
other::r--



-----------
| SUMMARY |
-----------


Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html


Done.

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.26-rc9 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=fr_FR at euro, LC_CTYPE=fr_FR at euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash

Versions of packages hplip depends on:
ii  adduser                   3.108          add and remove users and groups
ii  coreutils                 6.10-6         The GNU core utilities
ii  cups [cupsys]             1.3.7-8        Common UNIX Printing System(tm) - 
ii  cupsys                    1.3.7-8        Common UNIX Printing System (trans
ii  hplip-data                2.8.6-1        HP Linux Printing and Imaging - da
ii  libc6                     2.7-12         GNU C Library: Shared libraries
ii  libcups2                  1.3.7-8        Common UNIX Printing System(tm) - 
ii  libdbus-1-3               1.2.1-2        simple interprocess messaging syst
ii  libsnmp15                 5.4.1~dfsg-8.1 SNMP (Simple Network Management Pr
ii  libssl0.9.8               0.9.8g-10.1    SSL shared libraries
ii  libusb-0.1-4              2:0.1.12-12    userspace USB programming library
ii  lsb-base                  3.2-13         Linux Standard Base 3.2 init scrip
ii  python                    2.5.2-1        An interactive high-level object-o
ii  python-dbus               0.82.4-2       simple interprocess messaging syst
ii  python-imaging            1.1.6-3        Python Imaging Library
ii  python-support            0.8.4          automated rebuilding support for P

Versions of packages hplip recommends:
ii  cups-client [cupsys-client 1.3.7-8       Common UNIX Printing System(tm) - 
ii  cupsys-client              1.3.7-8       Common UNIX Printing System (trans
ii  hpijs                      2.8.6+2.8.6-1 HP Linux Printing and Imaging - gs
ii  hpijs-ppds                 2.8.6+2.8.6-1 HP Linux Printing and Imaging - HP
ii  hplip-gui                  2.8.6-1       HP Linux Printing and Imaging - GU
ii  openprinting-ppds          20080211-2    OpenPrinting printer support - Pos

-- no debconf information






More information about the Pkg-hpijs-devel mailing list