Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit From: Ian MacKinnell To: Debian Bug Tracking System Subject: none Reply-To: Ian MacKinnell X-Debbugs-Cc: none Package: hplip Version: 3.9.2-3 Severity: normal -- Package-specific info: error: Version: (Not available. CUPS may not be installed or not running.) error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP. HP Linux Imaging and Printing System (ver. 3.9.2) Dependency/Version Check Utility ver. 14.1 Copyright (c) 2001-8 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Saving output in log file: hp-check.log Initializing. Please wait... --------------- | SYSTEM INFO | --------------- Basic system information: Linux ian 2.6.26-2-686 #1 SMP Thu Mar 26 01:08:11 UTC 2009 i686 GNU/Linux Distribution: debian testing HPOJ running? No, HPOJ is not running (OK). Checking Python version... OK, version 2.5.4 installed Checking PyQt 4.x version... OK, version 4.4.2 installed. Checking for CUPS... Status: scheduler is running Checking for dbus/python-dbus... dbus daemon is running. python-dbus version: 0.83.0 ------------------------ | RUNTIME DEPENDENCIES | ------------------------ Checking for dependency: CUPS - Common Unix Printing System... OK, found. Checking for dependency: CUPS DDK - CUPS driver development kit... OK, found. Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer... OK, found. Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)... OK, found. Checking for dependency: ppdev - Parallel port support kernel module.... OK, found. Checking for dependency: PyQt 4- Qt interface for Python (for Qt version 4.x)... OK, found. Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4... To install this dependency, execute this command: su -c "apt-get install --force-yes -y python-qt4-dbus" Checking for dependency: Python ctypes - A foreign function library for Python... OK, found. Checking for dependency: Python DBus - Python bindings for DBus... OK, found. Checking for dependency: Python XML libraries... OK, found. Checking for dependency: Python 2.3 or greater - Required for fax functionality... OK, found. Checking for dependency: Reportlab - PDF library for Python... OK, found. Checking for dependency: SANE - Scanning library... OK, found. Checking for dependency: scanimage - Shell scanning program... OK, found. Checking for dependency: xsane - Graphical scanner frontend for SANE... OK, found. ---------------------- | HPLIP INSTALLATION | ---------------------- Currently installed HPLIP version... HPLIP 3.9.2 currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.9.2 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hpijs/HP ppdbase=/usr/share/ppd/hpijs doc=/usr/share/doc/hplip-doc/HTML icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv # Following values are determined at configure time and cannot be changed. [configure] network-build=yes pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no foomatiwarning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP. warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP. error: 4 errors and/or warnings. c-drv-install=yes foomatic-ppd-install=no foomatic-rip-hplip-install=no internal-tag=3.9.2.49 restricted-build=no ui-toolkit=qt4 qt3=no qt4=yes Current contents of '~/.hplip/hplip.conf' file: [last_used] printer = device_uri = "hp:/net/Photosmart_C5100_series?ip=192.168.1.204" [commands] scan = /usr/bin/xsane -V %SANE_URI% [installation] version = 3.9.2.49 date_time = 04/27/09 20:31:35 [settings] systray_visible = @Invalid() [refresh] rate = @Variant(\0\0\0\x1e) enable = false type = false [polling] enable = false device_list = interval = 0 ------------------------------- | DISCOVERED PARALLEL DEVICES | ------------------------------- No devices found. -------------------------- | DISCOVERED USB DEVICES | -------------------------- No devices found. --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- HP-C5180 -------- Type: Printer Installed in HPLIP?: Yes, using the hp: CUPS backend. Device URI: hp:/net/Photosmart_C5100_series?ip=192.168.1.204 PPD: /etc/cups/ppd/HP-C5180.ppd PPD Description: HP PS c5100 Series hpijs, hpijs 3.9.2.49 - HPLIP 3.9.2 Printer status: printer HP-C5180 is idle. enabled since Sun 14 Oct 2007 15:27:03 EST Communication status: Good kyocera ------- Type: Unknown Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend. Device URI: smb://amanda/kyocera PPD: /etc/cups/ppd/kyocera.ppd PPD Description: Kyocera Mita FS-1010 Printer status: printer kyocera is idle. enabled since Wed 14 Feb 2007 22:03:43 EST PDF --- Type: Unknown Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend. Device URI: cups-pdf:/ PPD: /etc/cups/ppd/PDF.ppd PPD Description: Generic CUPS-PDF Printer Printer status: printer PDF is idle. enabled since Mon 27 Apr 2009 20:06:18 EST ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in '/etc/sane.d/dll.conf'... 'hpaio' in '/etc/sane.d/dll.d/hplip'... OK, found. SANE backend 'hpaio' is properly set up. Checking output of 'scanimage -L'... device `v4l:/dev/video0' is a Noname BT848A video ( *** UNKNOWN/GENE virtual device device `hpaio:/net/Photosmart_C5100_series?ip=192.168.1.204' is a Hewlett-Packard Photosmart_C5100_series all-in-one --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... OK, found. Checking 'pcardext' Photocard extension... OK, found. Checking 'hpmudext' I/O extension... OK, found. Checking 'scanext' SANE scanning extension... OK, found. ----------------- | USB I/O SETUP | ----------------- Checking for permissions of USB attached printers... ----------- | SUMMARY | ----------- Summary of needed commands to run to satisfy missing dependencies: su -c "apt-get install --force-yes -y python-qt4-dbus" Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html Done. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores) Locale: LANG=en_AU, LC_CTYPE=en_AU (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages hplip depends on: ii adduser 3.110 add and remove users and groups ii coreutils 7.2-1 The GNU core utilities ii cups 1.3.8-1lenny4.1 Common UNIX Printing System(tm) - ii hplip-data 3.9.2-3 HP Linux Printing and Imaging - da ii libc6 2.9-4 GNU C Library: Shared libraries ii libcups2 1.3.8-1lenny4.1 Common UNIX Printing System(tm) - ii libdbus-1-3 1.2.12-1 simple interprocess messaging syst ii libsane 1.0.19-26 API library for scanners ii libsnmp15 5.4.1~dfsg-12 SNMP (Simple Network Management Pr ii libssl0.9.8 0.9.8g-16 SSL shared libraries ii libusb-0.1-4 2:0.1.12-13 userspace USB programming library ii lsb-base 3.2-22 Linux Standard Base 3.2 init scrip ii python 2.5.4-2 An interactive high-level object-o ii python-dbus 0.83.0-1 simple interprocess messaging syst ii python-imaging 1.1.6-3 Python Imaging Library Versions of packages hplip recommends: ii cups-client 1.3.8-1lenny4.1 Common UNIX Printing System(tm) - ii hpijs 3.9.2-3 HP Linux Printing and Imaging - gs ii sane-utils 1.0.19-26 API library for scanners -- utilit Versions of packages hplip suggests: ii gtklp 1.2.3-1.1 printing tool for CUPS on the GNOM ii hplip-doc 3.9.2-3 HP Linux Printing and Imaging - do ii hplip-gui 3.9.2-3 HP Linux Printing and Imaging - GU pn openprinting-ppds (no description available) ii xpp 1.5-cvs20050828-1+b2 X Printing Panel -- no debconf information