[electric] 01/19: - Add packaging for electric. Merge from Ubuntu with minor changes.

Markus Koschany apo-guest at moszumanska.debian.org
Wed Jul 9 09:49:38 UTC 2014


This is an automated email from the git hooks/post-receive script.

apo-guest pushed a commit to branch master
in repository electric.

commit bbeb7952ddf7533c5965fd7e85035c749b1c69d3
Author: Onkar Shinde <onkarshinde at ubuntu.com>
Date:   Fri Aug 29 22:12:03 2008 +0000

    - Add packaging for electric. Merge from Ubuntu with minor changes.
---
 debian/README.source                  |  33 ++++
 debian/TODO.Debian                    |   1 +
 debian/ant.properties                 |   4 +
 debian/changelog                      | 161 +++++++++++++++++++
 debian/compat                         |   2 +
 debian/control                        |  20 +++
 debian/copyright                      |  19 +++
 debian/electric.1                     | 285 ++++++++++++++++++++++++++++++++++
 debian/electric.desktop               |   9 ++
 debian/electric.docs                  |   3 +
 debian/electric.svg                   | 103 ++++++++++++
 debian/install                        |   4 +
 debian/manpages                       |   1 +
 debian/menu                           |   5 +
 debian/patches/01_fix_build_xml.patch |  44 ++++++
 debian/rules                          |  21 +++
 debian/watch                          |   7 +
 debian/wrappers/electric              |  12 ++
 18 files changed, 734 insertions(+)

diff --git a/debian/README.source b/debian/README.source
new file mode 100644
index 0000000..b1a751e
--- /dev/null
+++ b/debian/README.source
@@ -0,0 +1,33 @@
+This package uses CDBS (and therefore simple-patchsys.mk) in order to 
+apply patches to the upstream source. Patches are stored in 
+debian/patches and their filenames usually end in .patch or .diff .
+For further details, see the man page for cdbs-edit-patch.
+
+All commands described below should be run from the top directory of the 
+package source tree, unless otherwise stated.
+
+ * To generate the fully patched source, in a form ready for
+   editing, that would be built to create Debian packages, run: 
+
+     make -f debian/rules apply-patches
+
+   Note: This should happen automatically when you run 
+   dpkg-source -x on a CDBS simple-patchsys.mk source package.
+
+ * To modify the source and save those modifications so that
+   they will be applied when building the package, pick a
+   suitably informative patch file name, for example
+   01_add_README.source_file.patch, and then run:
+
+     cdbs-edit-patch 01_add_README.source_file.patch
+
+   This will place you in a new shell in a temporary copy of the 
+   source tree.  Make your desired modifications to it, and then 
+   exit the shell to create the patch file containing them (this 
+   file will appear in debian/patches).
+
+ * To remove source modifications that are currently being
+   applied when building the package, run:
+
+     make -f debian/rules reverse-patches
+
diff --git a/debian/TODO.Debian b/debian/TODO.Debian
new file mode 100644
index 0000000..bf10aae
--- /dev/null
+++ b/debian/TODO.Debian
@@ -0,0 +1 @@
+- add icon for electric in the debian menu system
diff --git a/debian/ant.properties b/debian/ant.properties
new file mode 100644
index 0000000..2d6fe26
--- /dev/null
+++ b/debian/ant.properties
@@ -0,0 +1,4 @@
+ant.build.javac.source=1.5
+ant.build.javac.target=1.5
+NO3D=1
+GNU=1
diff --git a/debian/changelog b/debian/changelog
new file mode 100644
index 0000000..94f18b4
--- /dev/null
+++ b/debian/changelog
@@ -0,0 +1,161 @@
+electric (8.07-1) unstable; urgency=low
+
+  * Merge with Ubuntu
+  * Remaining Debian changes
+    - debian/control
+      * electric doesn't build with GCJ. Hence remove default-jdk from build
+        depends.
+      * Set 'Maintainer' to Debian Java Maintainers. Remove
+        XSBC-Original-Maintainer field.
+      * Add Vcs-* fields
+
+ -- Onkar Shinde <onkarshinde at ubuntu.com>  Fri, 29 Aug 2008 23:23:48 +0530
+    
+electric (8.07-0ubuntu1) intrepid; urgency=low
+
+  * New Upstream version. Please check changelog for details. (LP: #242720)
+  * debian/control
+    - Add build dependencies *-jdk, cdbs and bsh.
+    - Remove build dependency dpatch. We will be using CDBS simple patchsys.
+    - Refreshed runtime dependencies to default-jre | java2-runtime and bsh.
+    - Added home page field.
+    - Standard version 3.8.0.
+    - Modify Maintainer value to match the DebianMaintainerField
+      specification.
+    - Changed email address for original maintainer to indicate who has
+      refreshed the packaging.
+  * debian/rules
+    - Revamped to use cdbs.
+    - Added get-orig-source target.
+  * debian/patches
+    - 00list, 02_sensible-browser.dpatch, 01_errors-numbers.dpatch,
+      03_manpage.dpatch - Deleted, not relevant anymore.
+    - 01_fix_build_xml.patch - Patch to fix the build.xml.
+  * debian/ant.properties
+    - File to set various compilation properties.
+  * debian/electric.1
+    - Remove the entry that causes lintian warning.
+  * debian/electric.desktop
+    - Change as suggested by desktop-file-validate.
+  * debian/electric.docs
+    - Updated as per changes in file names.
+  * debian/electric.svg
+    - Name changed from electric_icon.svg.
+  * debian/install
+    - Added appropriate locations for jar file, desktop file and wrapper shell
+      script.
+  * debian/README.source
+    - Added to comply with standards version 3.8.0.
+  * debian/TODO.Debian
+    - Name changed form TODO.
+  * debain/wrapper/electric
+    - Wrapper shell script to launch the application.
+  * debian/manpages
+    - Added for installation of manpage.
+  * debian/watch
+    - Updated to match jar files instead of older tar.gz files.
+  * debian/dirs
+    - Removed, not needed anymore.
+  * debian/{electric.doc-base, electric.examples, substvars}
+    - Removed, not relevant anymore.
+  * debian/*.debhelper
+    - Removed auto generated files. Not relevant anymore.
+
+ -- Onkar Shinde <onkarshinde at gmail.com>  Wed, 23 Jul 2008 02:09:53 +0530
+
+electric (6.05-4) unstable; urgency=low
+
+  * QA upload
+  * Use dpatch for patch management
+  * debhelper compatibility level 6: use in debian/rules as package tree
+    debian/electric instead of debian/tmp
+  * debian/rules: do not ignore errors of make clean 
+  * renamed debian/electric.copyright to debian/copyright, change "Authors(s)"
+    to "Author".
+  * renamed debian/electric/menu to debianmenu, changed menu section to
+    Applications/Science/Engineering, quote strings.
+  * src/vhdl/vhdlparser.c: fix bug concerning display of numbers in error
+    messages. Patch contributed by Ian Jackson (thanks!) (Closes: Bug#156613).
+  * src/graph/graphqt.cpp and src/graph/graphunixx11.c: call sensible-browser
+    instad of netscape. Add dependency on www-browser (Closes: Bug#140058).
+  * Add electric.desktop file contributed by Vassilis Pandis  (thanks!)
+    (Closes: Bug#367242).
+  * Renamed debian/electric.dirs to debian/dirs,
+    added /usr/share/{pixmaps,applicatins}.
+  * Install electric icon (taken from Ubuntu patch).
+  * Fix some nroff errors in manpage, patch by Nicolas François (thanks!)
+    (Closes: Bug#349892).
+
+ -- Ralf Treinen <treinen at debian.org>  Thu, 17 Jan 2008 23:04:59 +0100
+
+electric (6.05-3) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * lesstif1 is deprecated, transition to lesstif2 (Closes: #374242)
+  * Fixed copyright to point to GPL license to fix lintian error
+
+ -- Kai Hendry <hendry at iki.fi>  Fri, 14 Jul 2006 13:26:04 +0900
+
+electric (6.05-2.1) unstable; urgency=low
+
+  * Orphaning this package, setting maintainer to QA.
+
+ -- Kyle McMartin <kyle at debian.org>  Thu, 17 Mar 2005 11:18:49 -0500
+
+electric (6.05-2) unstable; urgency=low
+
+  * New maintainer. (closes: #277731)
+
+ -- Kyle McMartin <kyle at debian.org>  Fri, 22 Oct 2004 21:22:14 -0400
+
+electric (6.05-1) unstable; urgency=low
+
+  * new upstream release
+  * added menu hints (closes: #128765)
+  * changed doc-base to go into Technical section per menu-policy
+
+ -- Chris Ruffin <cmruffin at debian.org>  Sat, 23 Mar 2002 11:02:56 -0500
+
+electric (6.03-3) unstable; urgency=low
+
+  * Upgraded standards conformance to 3.5.4.0
+
+ -- Chris Ruffin <cmruffin at debian.org>  Sun,  3 Jun 2001 22:06:41 -0400
+
+electric (6.03-2) unstable; urgency=low
+
+  * Moved documentation to /usr/share/doc (closes: Bug#94788) 
+
+ -- Chris Ruffin <cmruffin at debian.org>  Thu, 26 Apr 2001 20:32:27 -0400
+
+electric (6.03-1) unstable; urgency=low
+
+  * New upstream sources. 
+
+ -- Chris Ruffin <cmruffin at debian.org>  Mon,  2 Apr 2001 20:44:08 -0400
+
+electric (6.02.1-1) unstable; urgency=low
+
+  * New upstrem sources.
+  * Restructured package
+
+ -- Chris Ruffin <cmruffin at debian.org>  Sat, 13 Jan 2001 20:57:44 -0500
+
+electric (6.00-2) unstable; urgency=low
+
+  * Added upstream-provided man page
+
+ -- Chris Ruffin <cmruffin at debian.org>  Sat, 13 Jan 2001 15:05:06 -0500
+
+electric (6.00-1) unstable; urgency=low
+
+  * Initial Release. (closes: Bug#76824, Bug#76825)
+  * Modified Makefile.in and src/include/config.h to bring package into
+    into compliance with Debian standards.
+  * Modified src/usr/usrcomek.c to specify the location of the documentation
+    directory (/usr/share/doc/electric/html)
+
+ -- Chris Ruffin <cmruffin at debian.org>  Sat,  9 Sep 2000 16:50:25 -0400
+
+
+
diff --git a/debian/compat b/debian/compat
new file mode 100644
index 0000000..5442e3d
--- /dev/null
+++ b/debian/compat
@@ -0,0 +1,2 @@
+6
+
diff --git a/debian/control b/debian/control
new file mode 100644
index 0000000..b399f9c
--- /dev/null
+++ b/debian/control
@@ -0,0 +1,20 @@
+Source: electric
+Section: electronics
+Priority: optional
+Build-Depends: debhelper (>= 6), cdbs, ant
+Build-Depends-Indep: openjdk-6-jdk | sun-java5-jdk | sun-java6-jdk, bsh 
+Maintainer: Debian Java Maintainers <pkg-java-maintainers at lists.alioth.debian.org>
+Standards-Version: 3.8.0
+Vcs-Svn: svn://svn.debian.org/svn/pkg-java/trunk/electric
+Vcs-Browser: http://svn.debian.org/wsvn/pkg-java/trunk/electric
+Homepage: http://www.staticfreesoft.com/productsFree.html
+
+Package: electric
+Architecture: all
+Depends: default-jre | java2-runtime, bsh
+Description: electrical CAD system
+ Electric is a sophisticated electrical CAD system that can handle many forms
+ of circuit design, including custom IC layout (ASICs), schematic drawing,
+ hardware description language specifications, and electro-mechanical hybrid
+ layout.
+
diff --git a/debian/copyright b/debian/copyright
new file mode 100644
index 0000000..92e3980
--- /dev/null
+++ b/debian/copyright
@@ -0,0 +1,19 @@
+This package was debianized by Chris Ruffin <cmruffin at debian.org> on
+Sat,  9 Sep 2000 16:50:25 -0400.
+
+It was downloaded from ftp://ftp.gnu.org/pub/gnu/electric/
+
+Upstream Author:    Static Free Software <info at staticfreesoft.com>
+                    or
+                    Steven Rubin <strubin at staticfreesoft.com>
+
+Copyright:
+
+Copyright (c) 2000 Static Free Software
+These scripts are free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+On Debian GNU/Linux systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL'.
diff --git a/debian/electric.1 b/debian/electric.1
new file mode 100644
index 0000000..036d41e
--- /dev/null
+++ b/debian/electric.1
@@ -0,0 +1,285 @@
+.TH electric 1 11/12/00
+.SH NAME
+electric - a VLSI design system
+
+.SH SYNOPSIS
+\fBelectric\fR [\fI-m\fR] [\fI-t technology\fR] [\fIlibrary\fR]
+
+.SH DESCRIPTION
+Electric is a general purpose system for all electrical design.
+It currently knows about nMOS, CMOS, Bipolar, artwork,
+schematics, printed-circuit boards, and many other technologies.
+Its has a large set of tools including
+multiple design-rule checkers (both incremental and hierarchical),
+an electrical rules checker,
+over a dozen simulator interfaces,
+multiple generators (PLA and pad frame),
+multiple routers (stitching, maze, river),
+network comparison,
+compaction,
+compensation,
+a VHDL compiler,
+and
+a silicon compiler that places-and-routes standard cells.
+.PP
+In addition to the text terminal used to invoke the program,
+Electric uses a color display with a mouse as a work station.
+Separate windows are used for text and graphics.
+.PP
+If a \fIlibrary\fR disk file is mentioned on the command line, that
+file is read as the initial design for editing.
+In addition, the following switches are recognized:
+.IP -t
+specifies an initial technology.  The argument must be a technology name such as
+"nmos", "cmos", "mocmos" (MOSIS CMOS), "mocmossub" (MOSIS CMOS Submicron),
+"bipolar" (simple Bipolar),
+"schematic" (Schematic capture), or "artwork" (sketchpad mode).
+.IP -m
+specifies there may be multiple monitors and that Electric should look for them.
+
+.SH REPRESENTATION
+Circuits are represented as networks that contain
+\fInodes\fR and connecting \fIarcs\fR.
+The nodes are electrical components such as transistors, logic gates, and
+contacts.
+The arcs are simply wires that connect the nodes.
+In addition, each node has a set of \fIports\fR which are the sites
+of arc connection.
+A \fItechnology\fR, then, is simply a set of primitive nodes and arcs
+that are the building blocks of circuits designed in that environment.
+.PP
+Collections of nodes and arcs can also be aggregated into
+\fIfacets\fR of \fIcells\fR which can be used higher
+in the hierarchy to act as nodes.
+These user-defined nodes have ports that come from internal nodes
+whose ports are \fIexported\fR.
+Facets are collected in \fIlibraries\fR which contain a hierarchically
+consistent design.
+.PP
+Arcs have properties that help constrain the design.
+For example, an arc may rotate arbitrarily or be fixed in their angle.
+Arcs can also be stretchable or \fIrigid\fR under modification of their
+connecting nodes.
+These constraints propagate hierarchically from the bottom-up.
+
+.SH TECHNOLOGIES
+A large set of technologies is provided in Electric.
+These can be modified with the technology editor, or completely
+new technologies can be created.
+The following paragraphs describe some of the basic technologies.
+.PP
+The nMOS technologies have arcs available in Metal, Polysilicon, and Diffusion.
+The primitive nodes include normal contacts,
+buried contacts, transistors, and "pins" for making arc corners.
+Transistors may be serpentine and the pure layer nodes may be polygonally
+described with the \fBnode trace\fR command.
+The "nmos" technology has the standard Mead&Conway design rules.
+.PP
+The CMOS technologies have arcs available in Metal, Polysilicon, and Diffusion.
+The Diffusion arcs may be found in a P-well implant or in a P+ implant.
+Thus, there are two types of metal-to-diffusion contacts, two types
+of diffusion pins, and two types of transistors: in P-well and in P+ implant.
+As with nMOS, the transistors may be serpentine and the pure layer primitives
+may be polygonally defined.
+The "cmos" technology has the standard design rules according to Griswold;
+the "mocmos" technology has design rules for the MOSIS CMOS process (double metal);
+the "mocmossub" technology has design rules for the MOSIS CMOS Submicron process (double poly and up to 6 metal);
+the "rcmos" technology has round geometry for the MOSIS CMOS process.
+.PP
+The "schematic" technology provides basic symbols for doing schematic capture.
+It contains the logic symbols: BUFFER, AND, OR, and XOR.
+Negating bubbles can be placed by negating a connecting arc.
+There are also more complex components such as
+flip-flop, off-page-connector, black-box, meter, and power source.
+Finally, there are the electrical components:
+transistor, resistor, diode, capacitor, and inductor.
+Two arc types exist for normal wires and variable-width busses.
+.PP
+The "artwork" technology is a sketchpad environment for doing
+general-purpose graphics.
+Components can be placed with arbitrary color and shape.
+.PP
+The "generic" technology exists for those miscellaneous purposes that do
+not fall into the domain of other technologies.
+It has the universal arc and pin which can connect to ANY other object
+and are therefore useful in mixed-technology designs.
+The invisible arc can be used for constraining two nodes without
+making a connection.
+The unrouted arc can be used for electrical connections that are
+to be routed later with real wires.
+The facet-center primitive, when placed in a facet, defines
+the cursor origin on instances of that facet.
+
+.SH "DESIGN-RULE CHECKING"
+The incremental design-rule checker is normally on and watches all changes
+made to the circuit.
+It does not correct but prints error messages when design rules are violated.
+Hierarchy is not handled, so the contents of subfacets are not checked.
+.PP
+The hierarchical checker looks all the way down the circuit for all design-rules.
+Another option allows an input deck to prepared for ECAD's Dracula
+design-rule checker.
+
+.SH COMPACTION
+The compactor attempts to reduce the size of a facet by removing unnecessary
+space between elements.
+When invoked it will
+compact in the vertical and horizontal directions until it can find no way
+to compact the facet any further.
+It does not do hierarchical compaction, does not guarantee optimal compaction,
+nor can it handle non-manhattan geometry properly.
+The compactor will also spread out the facet to guarantee no design-rule
+violations, if the "spread" option is set.
+
+.SH SIMULATION
+There are many simulator interfaces:
+ESIM (the default simulator: switch-level for nMOS without timing),
+RSIM (switch-level for MOS with timing),
+RNL (switch-level for MOS with timing and LISP front-end),
+MOSSIM (switch-level for MOS with timing),
+COSMOS (switch-level for MOS with timing),
+VERILOG (Cadence simulator),
+TEXSIM (a commercial simulator),
+SILOS (a commercial simulator),
+ABEL (PAL generator/simulator for schematic), and
+SPICE (circuit level).
+MOSSIM, COSMOS, VERILOG, TEXSIM, SILOS, and ABEL
+do not actually simulate: they only write an input deck of your circuit.
+.PP
+In preparation for most simulators, it is necessary to
+export those ports that you wish to manipulate or examine.
+You must also export power and ground ports.
+.PP
+In preparation for SPICE simulation, you must export power and ground signals and.
+explicitly connect them to source nodes.
+The source should then be parameterized to indicate the amount and whether
+it is voltage or current.
+For example, to make a 5 volt supply, create a source node and set the SPICE card to:
+"DC 5".
+Next, all input ports must be exported and connected to the positive side
+of sources.
+Next, all values that are being plotted must be exported and have meter nodes
+placed on them.
+The node should have the top and bottom ports connected appropriately.
+
+.SH "PLA GENERATION"
+There are two PLA generators, one specific to nMOS layout, and another
+specific to CMOS layout.
+The nMOS PLA generator reads a single personality table and generates the
+array and all driving circuitry including power and ground connections.
+The CMOS PLA generator reads two personality tables (AND and OR) and also
+reads a library of PLA helper components (called "pla_mocmos") and generates
+the array.
+
+.SH ROUTING
+The router is able to do river routing, maze routing, and simple facet stitching
+(the explicit wiring of implicitly connected nodes that abut).
+River routing runs a bus of wires between the two opposite sides of a routing channel.
+The connections on each side must be in a line so that the bus runs between
+two parallel sets of points.
+You must use the Unrouted arc from the Generic technology
+to indicate the ports to be connected.
+The river router can also connect wires to the perpendicular sides of the
+routing channel if one or more Unrouted wires cross these sides.
+.PP
+There are two stitching modes: auto stitching and mimic stitching.
+In auto stitching, all ports that physically touch will be stitched.
+Mimic stitching watches arcs that are created by the user
+and adds similar ones at other places in the facet.
+
+.SH "NETWORK COMPARISON"
+The network maintainer tool is able to compare the networks in the two
+facets being displayed on the screen.
+Once compared, nodes in one facet can be equated with nodes in the other.
+If the two networks are automorphic or otherwise difficult to distinguish,
+equivalence information can be specified prior to comparison by selecting
+a component in the first facet then selecting a component in the second facet.
+
+.SH AUTHOR
+.nf
+Steven M. Rubin
+   Static Free Software
+   4119 Alpine Road
+   Portola Valley, Ca 94028
+
+Also a cast of thousands:
+   Philip Attfield (Queens University): Polygon merging, facet dates
+   Ron Bolton (University of Saskatchewan): Miscellaneous help
+   Mark Brinsmead (Calgary): Apollo porting
+   Stefano Concina (Schlumberger): Polygon clipping
+   Peter Gallant (Queen's University): ALS simulation
+   T. J. Goodman (University of Canterbury) TEXSIM simulation
+   D. Guptill (Technical University of Nova Scotia): X-window interface
+   Robert Hon (Columbia University): CIF input
+   Sundaravarathan Iyengar (Case Western Reserve University): nMOS PLA generator
+   Allan Jost (Technical University of Nova Scotia): X-window interface
+   Wallace Kroeker (University of Calgary): Digital filter technology, CMOS PLA generator
+   Andrew Kostiuk (Queen's University): QUISC 1.0 Silicon compiler
+   Glen Lawson (S-MOS Systems): GDS-II input
+   David Lewis (University of Toronto): Short circuit checker
+   John Mohammed (Schlumberger): Miscellaneous help
+   Mark Moraes (University of Toronto): X-window interface
+   Sid Penstone (Queens University): many technologies, GDS-II output, SPICE improvements, SILOS simulation, GENERIC simulation
+   J. P. Polonovski (Ecole Polytechnique, France): Memory management improvement
+   Kevin Ryan (Technical University of Nova Scotia): X-window interface
+   Nora Ryan (Schlumberger): Technology translation, Compaction
+   Brent Serbin (Queen's University): ALS Simulator
+   Lyndon Swab (Queen's University): Northern Telecom CMOS technologies
+   Brian W. Thomson (University of Toronto): Mimic stitcher, RSIM interface
+   Burnie West (Schlumberger): Network maintainer help, bipolar technology
+   Telle Whitney (Schlumberger): River router
+   Rob Winstanley (University of Calgary): CIF input, RNL interface
+   Russell Wright (Queen's University): Lots of help
+   David J. Yurach (Queen's University): QUISC 2.0 Silicon compiler
+.fi
+
+.SH "SEE ALSO"
+Rubin, Steven M., "A General-Purpose Framework for CAD Algorithms",
+\fIIEEE Communications\fR, Special Issue on Communications and VLSI, May 1991.
+.br
+Rubin, Steven M., \fIComputer Aids for VLSI Design\fR, Addison-Wesley,
+Reading, Massachusetts, 1987.
+.br
+Rubin, Steven M., "An Integrated Aid for Top-Down Electrical Design",
+\fIProceedings, VLSI '83\fR (Anceau and Aas, eds.), North Holland, Amsterdam, 1983.
+.br
+Mead, C. and Conway, L., \fIIntroduction to VLSI Systems\fR,
+Addison-Wesley, 1980.
+.br
+Electrical User's Guide.
+.br
+Electric Internals manual.
+
+.SH FILES
+.TS
+l l.
+~/.cadrc	Personal startup file
+~/electric.log	Session logging file
+*.elib	Binary input/output files
+*.txt	Text input/output files
+*.cif	CIF input/output files
+*.pla	PLA personality input files
+*.map	Color map files
+*.mac	Macro files
+*.sim	ESIM, RSIM, RNL, and COSMOS simulation output
+rsim.in	RSIM simulation binary output
+rnl.in	RNL simulation binary output
+*.spi	SPICE simulation output
+*.ver	VERILOG simulation output
+*.ntk	MOSSIM simulation output
+*.sil	SILOS simulation output
+*.tdl	TEXSIM simulation output
+*.pal	ABLE PAL simulation output
+
+/usr/local/bin/findfastshorts	Fast short circuit checker
+/usr/local/bin/fastshorts	Slow short circuit checker
+/usr/local/bin/esim	Switch level simulator: ESIM
+/usr/local/bin/rsim	Switch level simulator: RSIM
+/usr/local/bin/rnl	Switch level simulator: RNL
+/usr/local/bin/presim	RNL and RSIM pre-filter
+/usr/local/bin/spice	Circuit level simulator: SPICE
+/usr/local/electric/lib/nl.l	RNL startup file
+.TE
+
+
+
diff --git a/debian/electric.desktop b/debian/electric.desktop
new file mode 100644
index 0000000..405d564
--- /dev/null
+++ b/debian/electric.desktop
@@ -0,0 +1,9 @@
+[Desktop Entry]
+Version=1.0
+Name=electric
+GenericName=Electrical CAD
+Comment=Electrical CAD System
+Type=Application
+Exec=electric
+Icon=electric
+Categories=Education;Electronics;Engineering;
diff --git a/debian/electric.docs b/debian/electric.docs
new file mode 100644
index 0000000..6da10b4
--- /dev/null
+++ b/debian/electric.docs
@@ -0,0 +1,3 @@
+README.txt
+#ChangeLog.txt
+
diff --git a/debian/electric.svg b/debian/electric.svg
new file mode 100644
index 0000000..121f697
--- /dev/null
+++ b/debian/electric.svg
@@ -0,0 +1,103 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://web.resource.org/cc/"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://inkscape.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="490"
+   height="490"
+   id="svg2"
+   sodipodi:version="0.32"
+   inkscape:version="0.43"
+   version="1.0"
+   sodipodi:docbase="/home/phil/programming/ubuntu"
+   sodipodi:docname="electric_icon.svg">
+  <defs
+     id="defs4" />
+  <sodipodi:namedview
+     id="base"
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1.0"
+     inkscape:pageopacity="0.0"
+     inkscape:pageshadow="2"
+     inkscape:zoom="0.70710678"
+     inkscape:cx="309.85939"
+     inkscape:cy="286.49377"
+     inkscape:document-units="px"
+     inkscape:current-layer="layer1"
+     inkscape:window-width="872"
+     inkscape:window-height="587"
+     inkscape:window-x="229"
+     inkscape:window-y="68" />
+  <metadata
+     id="metadata7">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:label="Layer 1"
+     inkscape:groupmode="layer"
+     id="layer1">
+    <g
+       id="g3981"
+       transform="translate(-2.828427,24.04163)">
+      <g
+         transform="translate(-156.9777,-282.8427)"
+         style="fill:none;fill-opacity:1"
+         id="g3086">
+        <path
+           style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:12;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+           d="M 508.60066,293.71334 C 587.84982,330.45927 642.85714,410.74023 642.85714,503.79076 L 642.85716,503.79076 C 642.85715,596.83988 587.85148,677.11982 508.60424,713.86651"
+           id="path1320" />
+        <path
+           style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:12;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+           d="M 302.82433,713.86651 C 223.57709,677.11982 168.57143,596.83987 168.57143,503.79075 C 168.57143,410.74022 223.57875,330.45926 302.82791,293.71333"
+           id="path1316" />
+        <path
+           style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:12;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+           d="M 508.64337,293.71731 L 303.07733,293.71731"
+           id="path1322"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:12;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+           d="M 508.40524,713.85827 L 302.8392,713.85827"
+           id="path2201"
+           sodipodi:nodetypes="cc" />
+      </g>
+      <rect
+         rx="4.1999998"
+         ry="4.1999998"
+         y="87.51947"
+         x="133.23659"
+         height="120"
+         width="58"
+         id="rect3092"
+         style="fill:#515151;fill-opacity:1;stroke:#000000;stroke-width:12;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+      <rect
+         rx="4.1999998"
+         ry="4.1999998"
+         y="87.51947"
+         x="306.2366"
+         height="120"
+         width="58"
+         id="rect3094"
+         style="fill:#515151;fill-opacity:1;stroke:#000000;stroke-width:12;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+      <path
+         sodipodi:nodetypes="cccccc"
+         id="rect3099"
+         d="M 216.36159,297.01947 L 248.73659,279.76947 L 281.11159,297.01947 L 281.11159,359.01947 L 216.36159,359.01947 L 216.36159,297.01947 z "
+         style="fill:#515151;fill-opacity:1;stroke:#000000;stroke-width:12;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1" />
+    </g>
+  </g>
+</svg>
diff --git a/debian/install b/debian/install
new file mode 100644
index 0000000..27f4e90
--- /dev/null
+++ b/debian/install
@@ -0,0 +1,4 @@
+electric.jar usr/share/electric/
+debian/electric.svg usr/share/icons/hicolor/scalable/apps/
+debian/electric.desktop usr/share/applications/
+debian/wrappers/electric usr/bin/
diff --git a/debian/manpages b/debian/manpages
new file mode 100644
index 0000000..cf9f2f3
--- /dev/null
+++ b/debian/manpages
@@ -0,0 +1 @@
+debian/electric.1
diff --git a/debian/menu b/debian/menu
new file mode 100644
index 0000000..4f00fe8
--- /dev/null
+++ b/debian/menu
@@ -0,0 +1,5 @@
+?package(electric):needs="X11"\
+  section="Applications/Science/Engineering"\
+  hints="CAD,Electric"\
+  title="electric" \
+  command="/usr/bin/electric"
diff --git a/debian/patches/01_fix_build_xml.patch b/debian/patches/01_fix_build_xml.patch
new file mode 100644
index 0000000..065ad9f
--- /dev/null
+++ b/debian/patches/01_fix_build_xml.patch
@@ -0,0 +1,44 @@
+diff -Nur -x '*.orig' -x '*~' electric-8.07/build.xml electric-8.07.new/build.xml
+--- electric-8.07/build.xml	2008-07-23 23:57:01.000000000 +0530
++++ electric-8.07.new/build.xml	2008-07-24 01:07:43.000000000 +0530
+@@ -75,6 +75,7 @@
+         <patternset refid="exclusionGNU" />
+         <patternset refid="exclusionSFS" />
+         <exclude name="com/sun/electric/plugins/jogl/" unless="JOGL"/>
++        <exclude name="com/sun/electric/tool/user/MacOSXInterface*"/>
+     </patternset>
+ 
+     <!-- Path for minimum set of external jars -->
+@@ -97,8 +98,8 @@
+         <javac debug="true" deprecation="true" destdir="." srcdir="."
+ 	    fork="true" memoryMaximumSize="512m">
+ 	    <!--compilerarg value="-Xlint:unchecked"/-->
+-            <classpath refid="externalClassPath" />
+-            <classpath refid="prefuseClassPath" />
++            <!--classpath refid="externalClassPath" />
++            <classpath refid="prefuseClassPath" /-->
+             <patternset refid="exclusion" />
+         </javac>
+     </target>
+@@ -337,10 +338,10 @@
+         <property name="version" value=""/>
+     </target>
+ 
+-    <target name="jar" depends="clean,init,compileTests" description="Make binary Jar file">
++    <target name="jar" depends="clean,init,compile" description="Make binary Jar file">
+ 	    <antcall target="unjarNoGNU"></antcall>
+-        <unjar dest="." src="${AppleJava}"/>
+-        <unjar dest="." src="${JUnit}"/>
++        <!--unjar dest="." src="${AppleJava}"/>
++        <unjar dest="." src="${JUnit}"/-->
+         <delete dir="META-INF"/>
+         <copy file="packaging/electric.mf" tofile="electric.mf"/>
+         <jar basedir="." compress="true" jarfile="electric.jar" manifest="electric.mf">
+@@ -360,6 +361,7 @@
+             <patternset refid="exclusion" />
+             <exclude name="**/*.java" unless="source"/>
+             <exclude name="**/*.form" unless="source"/>
++            <exclude name="debian/"/>
+         </jar>
+         <delete file="electric.mf"/>
+         <antcall target="deleteExternalJars"></antcall>
diff --git a/debian/rules b/debian/rules
new file mode 100755
index 0000000..b859a4f
--- /dev/null
+++ b/debian/rules
@@ -0,0 +1,21 @@
+#!/usr/bin/make -f
+
+export VERSION = $(shell head -1 debian/changelog | cut -f2 -d\( | cut -f1 -d\) | cut -f1 -d\-)
+
+include /usr/share/cdbs/1/rules/debhelper.mk
+include /usr/share/cdbs/1/rules/simple-patchsys.mk
+include /usr/share/cdbs/1/class/ant.mk
+
+JAVA_HOME_DIRS			:= /usr/lib/jvm/default-java /usr/lib/jvm/java-6-openjdk /usr/lib/jvm/java-1.5.0-sun /usr/lib/jvm/java-6-sun
+DEB_JARS			:= bsh
+DEB_INSTALL_CHANGELOGS_ALL	:= ChangeLog.txt
+
+
+get-orig-source::
+	cd .. && wget -c http://ftp.gnu.org/pub/gnu/electric/electric-$(VERSION).jar
+	mkdir debian/electric-$(VERSION) && cd debian/electric-$(VERSION) && jar -xvf ../../../electric-$(VERSION).jar
+	find debian/electric-$(VERSION)/ -name *.class | xargs rm -f
+	cd debian && tar -cf ../../electric_$(VERSION).orig.tar electric-$(VERSION)/
+	gzip -9 ../electric_$(VERSION).orig.tar
+	rm -rf debian/electric-$(VERSION)
+
diff --git a/debian/watch b/debian/watch
new file mode 100644
index 0000000..829ab78
--- /dev/null
+++ b/debian/watch
@@ -0,0 +1,7 @@
+# Example watch control file for uscan
+# Rename this file to "watch" and then you can run the "uscan" command
+# to check for upstream updates and more.
+# Site		Directory		Pattern			Version	Script
+version=3
+
+ftp.gnu.org /pub/gnu/electric/	electric-(.*)\.jar
diff --git a/debian/wrappers/electric b/debian/wrappers/electric
new file mode 100644
index 0000000..279f15d
--- /dev/null
+++ b/debian/wrappers/electric
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+if [ "$1" = "-classpath" ]
+then
+  CLASSPATH="$2"
+  shift 2
+fi
+
+CLASSPATH="${CLASSPATH:-.}:/usr/share/java/bsh.jar:/usr/share/electric/electric.jar"
+export CLASSPATH
+
+exec /usr/bin/java com.sun.electric.Launcher "$@"

-- 
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/pkg-java/electric.git



More information about the pkg-java-commits mailing list