[Pkg-kde-commits] rev 1238 - in trunk/packages/kdenetwork/debian: . patches
Adeodato Simó
adeodato@costa.debian.org
Fri, 01 Jul 2005 18:41:06 +0000
Author: adeodato
Date: 2005-07-01 18:41:04 +0000 (Fri, 01 Jul 2005)
New Revision: 1238
Added:
trunk/packages/kdenetwork/debian/patches/03_libtool_update.diff
trunk/packages/kdenetwork/debian/patches/07_disable_no_undefined.diff
Removed:
trunk/packages/kdenetwork/debian/patches/03_libtool_arm.diff
Modified:
trunk/packages/kdenetwork/debian/changelog
trunk/packages/kdenetwork/debian/patches/13_improve-libgadu-detection.diff
Log:
Preparing kdenetwork 3.3.2-6:
- libtool update (remove 03_libtool_arm then)
- add 07_disable_no_undefined
- remove hunks to auto-generated files from 13_improve-libgadu-detection
Modified: trunk/packages/kdenetwork/debian/changelog
===================================================================
--- trunk/packages/kdenetwork/debian/changelog 2005-06-29 09:16:51 UTC (rev 1237)
+++ trunk/packages/kdenetwork/debian/changelog 2005-07-01 18:41:04 UTC (rev 1238)
@@ -1,3 +1,19 @@
+kdenetwork (4:3.3.2-6) unstable; urgency=high
+
+ +++ Changes by Adeodato Simó:
+
+ * Do not depend on the disappeared libjack0.80.0-0. Achieve so by updating
+ the libtool used to build, so that it prunes unnecessary dependencies.
+
+ * The above libtool update removes the kwifimanager dependency on libmad0,
+ so closes: #311712 ("does not have a versioned dependency on libmad0").
+
+ * This upload will get built against the latest libiw-dev, so the dependency
+ on the disappeared libiw27 will get updated to libiw28. Closes: #315892,
+ thanks to Noèl Köthe for the heads-up.
+
+ -- Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org> Fri, 01 Jul 2005 20:32:30 +0200
+
kdenetwork (4:3.3.2-5) unstable; urgency=high
* High-urgency upload for sarge targetted RC bugfix.
Deleted: trunk/packages/kdenetwork/debian/patches/03_libtool_arm.diff
Added: trunk/packages/kdenetwork/debian/patches/03_libtool_update.diff
===================================================================
--- trunk/packages/kdenetwork/debian/patches/03_libtool_update.diff 2005-06-29 09:16:51 UTC (rev 1237)
+++ trunk/packages/kdenetwork/debian/patches/03_libtool_update.diff 2005-07-01 18:41:04 UTC (rev 1238)
@@ -0,0 +1,3133 @@
+diff -Nrua a/admin/libtool.m4.in b/admin/libtool.m4.in
+--- a/admin/libtool.m4.in 2004-04-02 17:39:50.000000000 +0200
++++ b/admin/libtool.m4.in 2005-07-01 20:19:33.000000000 +0200
+@@ -23,6 +23,7 @@
+ ## the same distribution terms that you use for the rest of that program.
+
+ # serial 47 AC_PROG_LIBTOOL
++# Debian $Rev: 214 $
+
+
+ # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+@@ -82,7 +83,7 @@
+ LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+
+ # Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent'
++LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+ AC_SUBST(LIBTOOL)dnl
+
+ # Prevent multiple expansion
+@@ -496,12 +497,11 @@
+ if AC_TRY_EVAL(ac_compile); then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+- LINUX_64_MODE="32"
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+- ppc64-*linux*)
++ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+@@ -513,7 +513,6 @@
+ esac
+ ;;
+ *64-bit*)
+- LINUX_64_MODE="64"
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+@@ -643,7 +642,7 @@
+ AC_MSG_CHECKING([the maximum length of command line arguments])
+ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+ i=0
+- testring="ABCD"
++ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+@@ -672,20 +671,26 @@
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
++ amigaos*)
++ # On AmigaOS with pdksh, this test takes hours, literally.
++ # So we just punt and use a minimum line length of 8192.
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
++
+ *)
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
+- = "XX$testring") >/dev/null 2>&1 &&
+- new_result=`expr "X$testring" : ".*" 2>&1` &&
++ while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
++ = "XX$teststring") >/dev/null 2>&1 &&
++ new_result=`expr "X$teststring" : ".*" 2>&1` &&
+ lt_cv_sys_max_cmd_len=$new_result &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+- testring=$testring$testring
++ teststring=$teststring$teststring
+ done
+- testring=
++ teststring=
+ # Add a significant safety factor because C++ compilers can tack on massive
+ # amounts of additional arguments before passing them to the linker.
+ # It appears as though 1/2 is a usable value.
+@@ -835,7 +840,7 @@
+ lt_cv_dlopen_self=yes
+ ])
+ ;;
+-
++
+ *)
+ AC_CHECK_FUNC([shl_load],
+ [lt_cv_dlopen="shl_load"],
+@@ -924,13 +929,6 @@
+ mkdir out
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+- # that will create temporary files in the current directory regardless of
+- # the output directory. Thus, making CWD read-only will cause this test
+- # to fail, enabling locking or at least warning the user not to do parallel
+- # builds.
+- chmod -w .
+-
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+@@ -954,8 +952,11 @@
+ fi
+ fi
+ chmod u+w .
+- $rm conftest* out/*
+- rmdir out
++ $rm conftest*
++ # SGI C++ compiler will create directory out/ii_files/ for
++ # template instantiation
++ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
++ $rm out/* && rmdir out
+ cd ..
+ rmdir conftest
+ $rm conftest*
+@@ -1072,7 +1073,7 @@
+ *)
+ AC_MSG_RESULT([no])
+ ;;
+- esac
++ esac
+ fi
+ ])# AC_LIBTOOL_SYS_LIB_STRIP
+
+@@ -1085,7 +1086,7 @@
+ library_names_spec=
+ libname_spec='lib$name'
+ soname_spec=
+-shrext=".so"
++shrext_cmds=".so"
+ postinstall_cmds=
+ postuninstall_cmds=
+ finish_cmds=
+@@ -1095,7 +1096,20 @@
+ version_type=none
+ dynamic_linker="$host_os ld.so"
+ sys_lib_dlsearch_path_spec="/lib /usr/lib"
+-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++if test "$GCC" = yes; then
++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
++ # if the path contains ";" then we assume it to be the separator
++ # otherwise default to the standard path separator (i.e. ":") - it is
++ # assumed that no part of a normal pathname contains ";" but that should
++ # okay in the real world where ";" in dirpaths is itself problematic.
++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++else
++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi
+ need_lib_prefix=unknown
+ hardcode_into_libs=no
+
+@@ -1160,7 +1174,7 @@
+ amigaos*)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+
+ beos*)
+@@ -1185,7 +1199,7 @@
+
+ cygwin* | mingw* | pw32*)
+ version_type=windows
+- shrext=".dll"
++ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+@@ -1250,7 +1264,7 @@
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+- shrext='$(test .$module = .yes && echo .so || echo .dylib)'
++ shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+ if test "$GCC" = yes; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+@@ -1273,7 +1287,7 @@
+ dynamic_linker=no
+ ;;
+
+-freebsd*-gnu*)
++kfreebsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+@@ -1333,7 +1347,7 @@
+ need_version=no
+ case "$host_cpu" in
+ ia64*)
+- shrext='.so'
++ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+@@ -1348,7 +1362,7 @@
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+- shrext='.sl'
++ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+@@ -1359,7 +1373,7 @@
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+- shrext='.sl'
++ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+@@ -1421,22 +1435,19 @@
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+- libsuff=
+- if test "x$LINUX_64_MODE" = x64; then
+- # Some platforms are per default 64-bit, so there's no /lib64
+- if test -d /lib64; then
+- libsuff=64
+- fi
+- fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
+- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
++ # Append ld.so.conf contents to the search path
++ if test -f /etc/ld.so.conf; then
++ lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '`
++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++ fi
++
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+@@ -1446,6 +1457,30 @@
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
++netbsdelf*-gnu)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='NetBSD ld.elf_so'
++ ;;
++
++knetbsd*-gnu)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='GNU ld.so'
++ ;;
++
+ netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+@@ -1455,7 +1490,7 @@
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+@@ -1484,7 +1519,7 @@
+ openbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+- need_version=no
++ need_version=yes
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+@@ -1504,7 +1539,7 @@
+
+ os2*)
+ libname_spec='$name'
+- shrext=".dll"
++ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+@@ -2095,31 +2130,23 @@
+ ;;
+
+ cygwin*)
+- lt_cv_deplibs_check_method=pass_all
++ # func_win32_libid is a shell function defined in ltmain.sh
++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+-
++
+ mingw* | pw32*)
+- # win32_libid is a shell function defined in ltmain.sh
+- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+- lt_cv_file_magic_cmd='win32_libid'
++ # Base MSYS/MinGW do not provide the 'file' command needed by
++ # func_win32_libid shell function, so use a weaker test based on 'objdump'.
++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+ darwin* | rhapsody*)
+- # this will be overwritten by pass_all, but leave it in just in case
+- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+- lt_cv_file_magic_cmd='/usr/bin/file -L'
+- case "$host_os" in
+- rhapsody* | darwin1.[[012]])
+- lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
+- ;;
+- *) # Darwin 1.3 on
+- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+- ;;
+- esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-freebsd*)
++freebsd* | kfreebsd*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+@@ -2158,42 +2185,21 @@
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+- case $host_os in
+- irix5* | nonstopux*)
+- # this will be overridden with pass_all, but let us keep it just in case
+- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+- ;;
+- *)
+- case $LD in
+- *-32|*"-32 ") libmagic=32-bit;;
+- *-n32|*"-n32 ") libmagic=N32;;
+- *-64|*"-64 ") libmagic=64-bit;;
+- *) libmagic=never-match;;
+- esac
+- # this will be overridden with pass_all, but let us keep it just in case
+- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
+- ;;
++ case $LD in
++ *-32|*"-32 ") libmagic=32-bit;;
++ *-n32|*"-n32 ") libmagic=N32;;
++ *-64|*"-64 ") libmagic=64-bit;;
++ *) libmagic=never-match;;
+ esac
+- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+ # This must be Linux ELF.
+ linux*)
+- case $host_cpu in
+- alpha* | hppa* | i*86 | ia64* | m68* | mips* | powerpc* | sparc* | s390* | sh* | x86_64* )
+- lt_cv_deplibs_check_method=pass_all ;;
+- # the debian people say, arm and glibc 2.3.1 works for them with pass_all
+- arm* )
+- lt_cv_deplibs_check_method=pass_all ;;
+- *)
+- # glibc up to 2.1.1 does not perform some relocations on ARM
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
+- esac
+- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
++ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-netbsd*)
++netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+@@ -2222,9 +2228,6 @@
+ ;;
+
+ osf3* | osf4* | osf5*)
+- # this will be overridden with pass_all, but let us keep it just in case
+- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+- lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+@@ -2234,7 +2237,6 @@
+
+ solaris*)
+ lt_cv_deplibs_check_method=pass_all
+- lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+@@ -2500,7 +2502,7 @@
+ fi
+ if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
+ AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
+- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then :
++ if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then :
+ else
+ AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
+ _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
+@@ -2550,7 +2552,7 @@
+ fi
+ ;;
+
+-aix4*)
++aix4* | aix5*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+@@ -2563,7 +2565,18 @@
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
+ ;;
+ *) # Darwin 1.3 on
+- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
++ else
++ case ${MACOSX_DEPLOYMENT_TARGET} in
++ 10.[[012]])
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
++ ;;
++ 10.*)
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
++ ;;
++ esac
++ fi
+ ;;
+ esac
+ output_verbose_link_cmd='echo'
+@@ -2579,8 +2592,8 @@
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
++ fi
++ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+@@ -2745,8 +2758,22 @@
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+- # KDE requires run time linking. Make it the default.
+- aix_use_runtimelinking=yes
++ aix_use_runtimelinking=no
++
++ # Test if we are trying to use run time linking or normal
++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++ # need to do runtime linking.
++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
++ for ld_flag in $LDFLAGS; do
++ case $ld_flag in
++ *-brtl*)
++ aix_use_runtimelinking=yes
++ break
++ ;;
++ esac
++ done
++ esac
++
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+@@ -2792,15 +2819,16 @@
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+- shared_flag='-qmkshrobj ${wl}-G'
++ shared_flag='${wl}-G'
+ else
+- shared_flag='-qmkshrobj'
++ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+- # Let the compiler handle the export list.
+- _LT_AC_TAGVAR(always_export_symbols, $1)=no
++ # It seems that -bexpall does not export symbols beginning with
++ # underscore (_), so it is better to generate a list of symbols to export.
++ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+@@ -2809,8 +2837,7 @@
+ _LT_AC_SYS_LIBPATH_AIX
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+@@ -2847,7 +2874,7 @@
+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=no
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+@@ -2875,7 +2902,18 @@
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
+ ;;
+ *) # Darwin 1.3 on
+- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
++ else
++ case ${MACOSX_DEPLOYMENT_TARGET} in
++ 10.[[012]])
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
++ ;;
++ 10.*)
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
++ ;;
++ esac
++ fi
+ ;;
+ esac
+ lt_int_apple_cc_single_mod=no
+@@ -2931,7 +2969,7 @@
+ freebsd-elf*)
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+- freebsd*)
++ freebsd* | kfreebsd*-gnu)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+@@ -2962,7 +3000,7 @@
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+@@ -3159,7 +3197,7 @@
+ ;;
+ esac
+ ;;
+- netbsd*)
++ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+@@ -3560,7 +3598,7 @@
+ fi
+ ;;
+
+- *.$objext|*.$libext)
++ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+@@ -3669,7 +3707,7 @@
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+-aix4*)
++aix4* | aix5*)
+ test "$enable_shared" = yes && enable_static=no
+ ;;
+ esac
+@@ -3811,11 +3849,12 @@
+ # without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+- fi
++ fi
+ # Now quote all the things that may contain metacharacters while being
+ # careful not to overquote the AC_SUBSTed values. We take copies of the
+ # variables and quote the copies for generation of the libtool script.
+- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
++ SED SHELL STRIP \
+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+ deplibs_check_method reload_flag reload_cmds need_locks \
+@@ -3865,7 +3904,7 @@
+ _LT_AC_TAGVAR(archive_cmds, $1) | \
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
+ _LT_AC_TAGVAR(module_cmds, $1) | \
+- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
++ _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
+ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
+ _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
+@@ -3996,7 +4035,7 @@
+ NM=$lt_NM
+
+ # A symbol stripping program
+-STRIP=$STRIP
++STRIP=$lt_STRIP
+
+ # Used to examine libraries when file_magic_cmd begins "file"
+ MAGIC_CMD=$MAGIC_CMD
+@@ -4027,7 +4066,7 @@
+ libext="$libext"
+
+ # Shared library suffix (normally ".so").
+-shrext='$shrext'
++shrext_cmds='$shrext_cmds'
+
+ # Executable file suffix (normally "").
+ exeext="$exeext"
+@@ -4271,7 +4310,10 @@
+ # If there is no Makefile yet, we rely on a make rule to execute
+ # `config.status --recheck' to rerun these tests and create the
+ # libtool script then.
+- test -f Makefile && make "$ltmain"
++ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
++ if test -f "$ltmain_in"; then
++ test -f Makefile && make "$ltmain"
++ fi
+ fi
+ ])# AC_LIBTOOL_CONFIG
+
+@@ -4344,7 +4386,7 @@
+ symcode='[[BCDEGQRST]]'
+ ;;
+ solaris* | sysv5*)
+- symcode='[[BDT]]'
++ symcode='[[BDRT]]'
+ ;;
+ sysv4)
+ symcode='[[DFNSTU]]'
+@@ -4362,7 +4404,7 @@
+ # If we're using GNU nm, then use its standard symbol codes.
+ case `$NM -V 2>&1` in
+ *GNU* | *'with BFD'*)
+- symcode='[[ABCDGISTW]]' ;;
++ symcode='[[ABCDGIRSTW]]' ;;
+ esac
+
+ # Try without a prefix undercore, then with it.
+@@ -4577,7 +4619,7 @@
+ ;;
+ esac
+ ;;
+- freebsd*)
++ freebsd* | kfreebsd*-gnu)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+@@ -4628,7 +4670,7 @@
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+- ;;
++ ;;
+ cxx)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+@@ -4653,7 +4695,7 @@
+ ;;
+ esac
+ ;;
+- netbsd*)
++ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+@@ -4964,6 +5006,9 @@
+ cygwin* | mingw*)
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
++ linux*)
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
++ ;;
+ *)
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+@@ -4988,7 +5033,7 @@
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_AC_TAGVAR(hardcode_automatic, $1)=no
+ _LT_AC_TAGVAR(module_cmds, $1)=
+- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
++ _LT_AC_TAGVAR(module_expsym_cmds, $1)=
+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ # include_expsyms should be a list of space-separated symbols to be *always*
+@@ -5072,7 +5117,7 @@
+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=no
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+@@ -5093,7 +5138,7 @@
+ fi
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+@@ -5131,6 +5176,32 @@
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
++ linux*)
++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds"
++ supports_anon_versioning=no
++ case `$LD -v 2>/dev/null` in
++ *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
++ *\ 2.11.*) ;; # other 2.11 versions
++ *) supports_anon_versioning=yes ;;
++ esac
++ if test $supports_anon_versioning = yes; then
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
++cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++$echo "local: *; };" >> $output_objdir/$libname.ver~
++ $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++ else
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds"
++ fi
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+@@ -5184,9 +5255,20 @@
+ else
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+ fi
++ aix_use_runtimelinking=no
++
++ # Test if we are trying to use run time linking or normal
++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++ # need to do runtime linking.
++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
++ for ld_flag in $LDFLAGS; do
++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
++ aix_use_runtimelinking=yes
++ break
++ fi
++ done
++ esac
+
+- # KDE requires run time linking. Make it the default.
+- aix_use_runtimelinking=yes
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+@@ -5232,24 +5314,24 @@
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+- shared_flag='-qmkshrobj ${wl}-G'
++ shared_flag='${wl}-G'
+ else
+- shared_flag='-qmkshrobj'
++ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+- # Let the compiler handle the export list.
+- _LT_AC_TAGVAR(always_export_symbols, $1)=no
++ # It seems that -bexpall does not export symbols beginning with
++ # underscore (_), so it is better to generate a list of symbols to export.
++ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty executable.
+- _LT_AC_SYS_LIBPATH_AIX
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ _LT_AC_SYS_LIBPATH_AIX
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+@@ -5292,11 +5374,11 @@
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=no
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+- shrext=".dll"
++ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+@@ -5315,7 +5397,18 @@
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
+ ;;
+ *) # Darwin 1.3 on
+- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
++ else
++ case ${MACOSX_DEPLOYMENT_TARGET} in
++ 10.[[012]])
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
++ ;;
++ 10.*)
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
++ ;;
++ esac
++ fi
+ ;;
+ esac
+ lt_int_apple_cc_single_mod=no
+@@ -5341,9 +5434,9 @@
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+- else
++ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
++ fi
+ ;;
+
+ dgux*)
+@@ -5376,7 +5469,7 @@
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+- freebsd*)
++ freebsd* | kfreebsd*-gnu)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+@@ -5463,7 +5556,7 @@
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+@@ -5693,7 +5786,7 @@
+ AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+ $rm conftest*
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+-
++
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+@@ -5852,7 +5945,7 @@
+ fi
+ done
+ done
+-])
+ SED=$lt_cv_path_SED
++])
+ AC_MSG_RESULT([$SED])
+ ])
+diff -Nrua a/admin/ltmain.sh b/admin/ltmain.sh
+--- a/admin/ltmain.sh 2004-06-15 18:47:06.000000000 +0200
++++ b/admin/ltmain.sh 2005-07-01 20:19:33.000000000 +0200
+@@ -1,7 +1,7 @@
+ # ltmain.sh - Provide generalized library-building support services.
+ # NOTE: Changing this file will not affect anything until you rerun configure.
+ #
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004
+ # Free Software Foundation, Inc.
+ # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+ #
+@@ -24,6 +24,29 @@
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
++basename="s,^.*/,,g"
++
++# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
++# is ksh but when the shell is invoked as "sh" and the current value of
++# the _XPG environment variable is not equal to 1 (one), the special
++# positional parameter $0, within a function call, is the name of the
++# function.
++progpath="$0"
++
++# The name of this program:
++progname=`echo "$progpath" | $SED $basename`
++modename="$progname"
++
++# Global variables:
++EXIT_SUCCESS=0
++EXIT_FAILURE=1
++
++PROGRAM=ltmain.sh
++PACKAGE=libtool
++VERSION=1.5.6
++TIMESTAMP=" (1.1220.2.95 2004/04/11 05:50:42) Debian$Rev: 224 $"
++
++
+ # Check that we have a working $echo.
+ if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+@@ -36,7 +59,7 @@
+ :
+ else
+ # Restart under the correct shell, and then maybe $echo will work.
+- exec $SHELL "$0" --no-reexec ${1+"$@"}
++ exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+ fi
+
+ if test "X$1" = X--fallback-echo; then
+@@ -45,19 +68,9 @@
+ cat <<EOF
+ $*
+ EOF
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+
+-# The name of this program.
+-progname=`$echo "$0" | ${SED} 's%^.*/%%'`
+-modename="$progname"
+-
+-# Constants.
+-PROGRAM=ltmain.sh
+-PACKAGE=libtool
+-VERSION=1.5a
+-TIMESTAMP=" (1.1240 2003/06/26 06:55:19)"
+-
+ default_mode=
+ help="Try \`$progname --help' for more information."
+ magic="%%%MAGIC variable%%%"
+@@ -94,12 +107,13 @@
+ fi
+
+ # Make sure IFS has a sensible default
+-: ${IFS=" "}
++: ${IFS="
++"}
+
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ $echo "$modename: not configured to build any kind of library" 1>&2
+ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Global variables.
+@@ -118,10 +132,13 @@
+ # Shell function definitions:
+ # This seems to be the best place for them
+
++# func_win32_libid arg
++# return the library type of file 'arg'
++#
+ # Need a lot of goo to handle *both* DLLs and import libs
+ # Has to be a shell function in order to 'eat' the argument
+ # that is supplied when $file_magic_command is called.
+-win32_libid () {
++func_win32_libid () {
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+@@ -130,7 +147,7 @@
+ ;;
+ *ar\ archive*) # could be an import, or static
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
+- grep -E 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
++ $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+ win32_nmres=`eval $NM -f posix -A $1 | \
+ sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
+ if test "X$win32_nmres" = "Ximport" ; then
+@@ -140,7 +157,7 @@
+ fi
+ fi
+ ;;
+- *DLL*)
++ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+@@ -154,9 +171,76 @@
+ $echo $win32_libid_type
+ }
+
++
++# func_infer_tag arg
++# Infer tagged configuration to use if any are available and
++# if one wasn't chosen via the "--tag" command line option.
++# Only attempt this if the compiler in the base compile
++# command doesn't match the default compiler.
++# arg is usually of the form 'gcc ...'
++func_infer_tag () {
++ if test -n "$available_tags" && test -z "$tagname"; then
++ CC_quoted=
++ for arg in $CC; do
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++ CC_quoted="$CC_quoted $arg"
++ done
++ case $@ in
++ # Blanks in the command may have been stripped by the calling shell,
++ # but not from the CC environment variable when configure was run.
++ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
++ # Blanks at the start of $base_compile will cause this to fail
++ # if we don't check for them as well.
++ *)
++ for z in $available_tags; do
++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
++ # Evaluate the configuration.
++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
++ CC_quoted=
++ for arg in $CC; do
++ # Double-quote args containing other shell metacharacters.
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++ CC_quoted="$CC_quoted $arg"
++ done
++ case "$@ " in
++ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
++ # The compiler in the base compile command matches
++ # the one in the tagged configuration.
++ # Assume this is the tagged configuration we want.
++ tagname=$z
++ break
++ ;;
++ esac
++ fi
++ done
++ # If $tagname still isn't set, then no tagged configuration
++ # was found and let the user know that the "--tag" command
++ # line option must be used.
++ if test -z "$tagname"; then
++ $echo "$modename: unable to infer tagged configuration"
++ $echo "$modename: specify a tag with \`--tag'" 1>&2
++ exit $EXIT_FAILURE
++# else
++# $echo "$modename: using $tagname tagged configuration"
++ fi
++ ;;
++ esac
++ fi
++}
+ # End of Shell function definitions
+ #####################################
+
++# Darwin sucks
++eval std_shrext=\"$shrext_cmds\"
++
+ # Parse our command line options once, thoroughly.
+ while test "$#" -gt 0
+ do
+@@ -176,12 +260,13 @@
+ ;;
+ tag)
+ tagname="$arg"
++ preserve_args="${preserve_args}=$arg"
+
+ # Check whether tagname contains only valid characters
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ $echo "$progname: invalid tag name: $tagname" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+@@ -191,10 +276,10 @@
+ # not specially marked.
+ ;;
+ *)
+- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
+ taglist="$taglist $tagname"
+ # Evaluate the configuration.
+- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
+ else
+ $echo "$progname: ignoring unknown tag $tagname" 1>&2
+ fi
+@@ -223,21 +308,22 @@
+ $echo "Copyright (C) 2003 Free Software Foundation, Inc."
+ $echo "This is free software; see the source for copying conditions. There is NO"
+ $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ --config)
+- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
++ ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
++ ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+ done
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ --debug)
+ $echo "$progname: enabling shell trace mode"
+ set -x
++ preserve_args="$preserve_args $arg"
+ ;;
+
+ --dry-run | -n)
+@@ -256,7 +342,7 @@
+ else
+ $echo "disable static libraries"
+ fi
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ --finish) mode="finish" ;;
+@@ -268,6 +354,7 @@
+
+ --quiet | --silent)
+ show=:
++ preserve_args="$preserve_args $arg"
+ ;;
+
+ --tag) prevopt="--tag" prev=tag ;;
+@@ -275,6 +362,7 @@
+ set tag "$optarg" ${1+"$@"}
+ shift
+ prev=tag
++ preserve_args="$preserve_args --tag"
+ ;;
+
+ -dlopen)
+@@ -285,7 +373,7 @@
+ -*)
+ $echo "$modename: unrecognized option \`$arg'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+
+ *)
+@@ -298,7 +386,7 @@
+ if test -n "$prevopt"; then
+ $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # If this variable is set in any of the actions, the command in it
+@@ -354,7 +442,7 @@
+ if test -n "$execute_dlfiles" && test "$mode" != execute; then
+ $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+@@ -369,9 +457,11 @@
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
++ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
++ later=
+
+ for arg
+ do
+@@ -394,24 +484,19 @@
+ -o)
+ if test -n "$libobj" ; then
+ $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ arg_mode=target
+ continue
+ ;;
+
+- -static)
+- build_old_libs=yes
+- continue
+- ;;
+-
+- -prefer-pic)
+- pic_mode=yes
++ -static | -prefer-pic | -prefer-non-pic)
++ later="$later $arg"
+ continue
+ ;;
+
+- -prefer-non-pic)
+- pic_mode=no
++ -no-suppress)
++ suppress_opt=no
+ continue
+ ;;
+
+@@ -424,7 +509,7 @@
+ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+ lastarg=
+ save_ifs="$IFS"; IFS=','
+- for arg in $args; do
++ for arg in $args; do
+ IFS="$save_ifs"
+
+ # Double-quote args containing other shell metacharacters.
+@@ -474,11 +559,11 @@
+ case $arg_mode in
+ arg)
+ $echo "$modename: you must specify an argument for -Xcompile"
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ target)
+ $echo "$modename: you must specify a target with \`-o'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ *)
+ # Get the name of the library object.
+@@ -511,50 +596,30 @@
+ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+ *)
+ $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+- # Infer tagged configuration to use if any are available and
+- # if one wasn't chosen via the "--tag" command line option.
+- # Only attempt this if the compiler in the base compile
+- # command doesn't match the default compiler.
+- if test -n "$available_tags" && test -z "$tagname"; then
+- case $base_compile in
+- # Blanks in the command may have been stripped by the calling shell,
+- # but not from the CC environment variable when configure was run.
+- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "*) ;;
+- # Blanks at the start of $base_compile will cause this to fail
+- # if we don't check for them as well.
+- *)
+- for z in $available_tags; do
+- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
+- # Evaluate the configuration.
+- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+- case "$base_compile " in
+- "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
+- # The compiler in the base compile command matches
+- # the one in the tagged configuration.
+- # Assume this is the tagged configuration we want.
+- tagname=$z
+- break
+- ;;
+- esac
+- fi
+- done
+- # If $tagname still isn't set, then no tagged configuration
+- # was found and let the user know that the "--tag" command
+- # line option must be used.
+- if test -z "$tagname"; then
+- $echo "$modename: unable to infer tagged configuration"
+- $echo "$modename: specify a tag with \`--tag'" 1>&2
+- exit 1
+-# else
+-# $echo "$modename: using $tagname tagged configuration"
+- fi
++ func_infer_tag $base_compile
++
++ for arg in $later; do
++ case $arg in
++ -static)
++ build_old_libs=yes
++ continue
++ ;;
++
++ -prefer-pic)
++ pic_mode=yes
++ continue
++ ;;
++
++ -prefer-non-pic)
++ pic_mode=no
++ continue
+ ;;
+ esac
+- fi
++ done
+
+ objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+@@ -568,7 +633,7 @@
+ if test -z "$base_compile"; then
+ $echo "$modename: you must specify a compilation command" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Delete any leftover library objects.
+@@ -579,7 +644,7 @@
+ fi
+
+ $run $rm $removelist
+- trap "$run $rm $removelist; exit 1" 1 2 15
++ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+@@ -598,7 +663,7 @@
+ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ removelist="$removelist $output_obj $lockfile"
+- trap "$run $rm $removelist; exit 1" 1 2 15
++ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+ else
+ output_obj=
+ need_locks=no
+@@ -608,7 +673,7 @@
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+- until $run ln "$0" "$lockfile" 2>/dev/null; do
++ until $run ln "$progpath" "$lockfile" 2>/dev/null; do
+ $show "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+@@ -626,7 +691,7 @@
+ compiler."
+
+ $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ $echo $srcfile > "$lockfile"
+ fi
+@@ -681,7 +746,7 @@
+ if $run eval "$command"; then :
+ else
+ test -n "$output_obj" && $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test "$need_locks" = warn &&
+@@ -701,7 +766,7 @@
+ compiler."
+
+ $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+@@ -722,7 +787,9 @@
+ EOF
+
+ # Allow error messages only from the first compilation.
+- suppress_output=' >/dev/null 2>&1'
++ if test "$suppress_opt" = yes; then
++ suppress_output=' >/dev/null 2>&1'
++ fi
+ else
+ # No PIC object so indicate it doesn't exist in the libtool
+ # object file.
+@@ -751,7 +818,7 @@
+ if $run eval "$command"; then :
+ else
+ $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test "$need_locks" = warn &&
+@@ -771,7 +838,7 @@
+ compiler."
+
+ $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+@@ -809,7 +876,7 @@
+ $run $rm "$lockfile"
+ fi
+
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ # libtool link mode
+@@ -835,7 +902,7 @@
+ ;;
+ esac
+ libtool_args="$nonopt"
+- base_compile="$nonopt"
++ base_compile="$nonopt $@"
+ compile_command="$nonopt"
+ finalize_command="$nonopt"
+
+@@ -847,7 +914,6 @@
+ old_convenience=
+ deplibs=
+ old_deplibs=
+- add_flags=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+@@ -868,6 +934,7 @@
+ no_install=no
+ objs=
+ non_pic_objects=
++ precious_files_regex=
+ prefer_static_libs=no
+ preload=no
+ prev=
+@@ -881,6 +948,8 @@
+ vinfo=
+ vinfo_number=no
+
++ func_infer_tag $base_compile
++
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+@@ -912,7 +981,6 @@
+ # Go through the arguments, transforming them on the way.
+ while test "$#" -gt 0; do
+ arg="$1"
+- base_compile="$base_compile $arg"
+ shift
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+@@ -976,7 +1044,7 @@
+ export_symbols="$arg"
+ if test ! -f "$arg"; then
+ $echo "$modename: symbol file \`$arg' does not exist"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ prev=
+ continue
+@@ -991,6 +1059,11 @@
+ prev=
+ continue
+ ;;
++ precious_regex)
++ precious_files_regex="$arg"
++ prev=
++ continue
++ ;;
+ release)
+ release="-$arg"
+ prev=
+@@ -1023,7 +1096,7 @@
+ test "$pic_object" = none && \
+ test "$non_pic_object" = none; then
+ $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Extract subdirectory from the argument.
+@@ -1076,7 +1149,7 @@
+ # Only an error if not doing a dry-run.
+ if test -z "$run"; then
+ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ else
+ # Dry-run case.
+
+@@ -1097,7 +1170,7 @@
+ done
+ else
+ $echo "$modename: link input file \`$save_arg' does not exist"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ arg=$save_arg
+ prev=
+@@ -1109,7 +1182,7 @@
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ $echo "$modename: only absolute run-paths are allowed" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ if test "$prev" = rpath; then
+@@ -1149,6 +1222,11 @@
+ finalize_command="$finalize_command $qarg"
+ continue
+ ;;
++ shrext)
++ shrext_cmds="$arg"
++ prev=
++ continue
++ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+@@ -1197,7 +1275,7 @@
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ $echo "$modename: more than one -exported-symbols argument is not allowed"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+@@ -1233,7 +1311,7 @@
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ dir="$absdir"
+ ;;
+@@ -1263,9 +1341,6 @@
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+- *-*-freebsd*-gnu*)
+- # prevent being parsed by the freebsd regexp below
+- ;;
+ *-*-mingw* | *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+@@ -1281,10 +1356,7 @@
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+- *-*-freebsd*-gnu*)
+- # prevent being parsed by the freebsd regexp below
+- ;;
+- *-*-openbsd*)
++ *-*-openbsd* | *-*-freebsd*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+@@ -1294,6 +1366,11 @@
+ continue
+ ;;
+
++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
++ deplibs="$deplibs $arg"
++ continue
++ ;;
++
+ -module)
+ module=yes
+ continue
+@@ -1358,6 +1435,11 @@
+
+ -o) prev=output ;;
+
++ -precious-files-regex)
++ prev=precious_regex
++ continue
++ ;;
++
+ -release)
+ prev=release
+ continue
+@@ -1380,7 +1462,7 @@
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ $echo "$modename: only absolute run-paths are allowed" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ case "$xrpath " in
+@@ -1476,7 +1558,6 @@
+ arg="\"$arg\""
+ ;;
+ esac
+- add_flags="$add_flags $arg"
+ ;;
+
+ *.$objext)
+@@ -1504,7 +1585,7 @@
+ test "$pic_object" = none && \
+ test "$non_pic_object" = none; then
+ $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Extract subdirectory from the argument.
+@@ -1557,7 +1638,7 @@
+ # Only an error if not doing a dry-run.
+ if test -z "$run"; then
+ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ else
+ # Dry-run case.
+
+@@ -1611,7 +1692,6 @@
+ arg="\"$arg\""
+ ;;
+ esac
+- add_flags="$add_flags $arg"
+ ;;
+ esac # arg
+
+@@ -1625,48 +1705,7 @@
+ if test -n "$prev"; then
+ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+ $echo "$help" 1>&2
+- exit 1
+- fi
+-
+- # Infer tagged configuration to use if any are available and
+- # if one wasn't chosen via the "--tag" command line option.
+- # Only attempt this if the compiler in the base link
+- # command doesn't match the default compiler.
+- if test -n "$available_tags" && test -z "$tagname"; then
+- case $base_compile in
+- # Blanks in the command may have been stripped by the calling shell,
+- # but not from the CC environment variable when configure was run.
+- "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) ;;
+- # Blanks at the start of $base_compile will cause this to fail
+- # if we don't check for them as well.
+- *)
+- for z in $available_tags; do
+- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
+- # Evaluate the configuration.
+- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+- case $base_compile in
+- "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
+- # The compiler in $compile_command matches
+- # the one in the tagged configuration.
+- # Assume this is the tagged configuration we want.
+- tagname=$z
+- break
+- ;;
+- esac
+- fi
+- done
+- # If $tagname still isn't set, then no tagged configuration
+- # was found and let the user know that the "--tag" command
+- # line option must be used.
+- if test -z "$tagname"; then
+- $echo "$modename: unable to infer tagged configuration"
+- $echo "$modename: specify a tag with \`--tag'" 1>&2
+- exit 1
+-# else
+-# $echo "$modename: using $tagname tagged configuration"
+- fi
+- ;;
+- esac
++ exit $EXIT_FAILURE
+ fi
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+@@ -1710,7 +1749,7 @@
+ "")
+ $echo "$modename: you must specify an output file" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+@@ -1720,7 +1759,7 @@
+
+ case $host in
+ *cygwin* | *mingw* | *pw32*)
+- # don't eliminate duplcations in $postdeps and $predeps
++ # don't eliminate duplications in $postdeps and $predeps
+ duplicate_compiler_generated_deps=yes
+ ;;
+ *)
+@@ -1773,7 +1812,7 @@
+ *.la) ;;
+ *)
+ $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ done
+@@ -1799,7 +1838,10 @@
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
++ link)
++ libs="$deplibs %DEPLIBS%"
++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
++ ;;
+ esac
+ fi
+ if test "$pass" = dlopen; then
+@@ -1811,18 +1853,23 @@
+ lib=
+ found=no
+ case $deplib in
++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
++ if test "$linkmode,$pass" = "prog,link"; then
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ deplibs="$deplib $deplibs"
++ fi
++ continue
++ ;;
+ -l*)
+ if test "$linkmode" != lib && test "$linkmode" != prog; then
+ $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+ continue
+ fi
+- if test "$pass" = conv && test "$allow_undefined" = yes; then
+- deplibs="$deplib $deplibs"
+- continue
+- fi
+ name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+- for search_ext in .la $shrext .so .a; do
++ for search_ext in .la $std_shrext .so .a; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}${search_ext}"
+ if test -f "$lib"; then
+@@ -1898,11 +1945,11 @@
+ fi
+ if test "$pass" = scan; then
+ deplibs="$deplib $deplibs"
+- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
++ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ ;;
+ *)
+ $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+@@ -1981,14 +2028,14 @@
+ if test "$found" = yes || test -f "$lib"; then :
+ else
+ $echo "$modename: cannot find the library \`$lib'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Check to see that this really is a libtool archive.
+ if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+@@ -2021,33 +2068,32 @@
+ if test "$pass" = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+- tmp_libs=
+- for deplib in $dependency_libs; do
+- #echo "Adding $deplib to \$deplibs"
+- deplibs="$deplib $deplibs"
+- if test "X$duplicate_deps" = "Xyes" ; then
+- case "$tmp_libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+- esac
+- fi
+- tmp_libs="$tmp_libs $deplib"
+- done
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ convenience="$convenience $ladir/$objdir/$old_library"
+ old_convenience="$old_convenience $ladir/$objdir/$old_library"
++ tmp_libs=
++ for deplib in $dependency_libs; do
++ deplibs="$deplib $deplibs"
++ if test "X$duplicate_deps" = "Xyes" ; then
++ case "$tmp_libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ fi
++ tmp_libs="$tmp_libs $deplib"
++ done
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ $echo "$modename: \`$lib' is not a convenience library" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ continue
+ fi # $pass = conv
+
+-
++
+ # Get the name of the library we link against.
+ linklib=
+ for l in $old_library $library_names; do
+@@ -2055,16 +2101,18 @@
+ done
+ if test -z "$linklib"; then
+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # This library was specified with -dlopen.
+ if test "$pass" = dlopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+- if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
++ if test -z "$dlname" ||
++ test "$dlopen_support" != yes ||
++ test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+@@ -2113,7 +2161,7 @@
+ if test "$pass" = dlpreopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+@@ -2140,7 +2188,7 @@
+ continue
+ fi
+
+-
++
+ if test "$linkmode" = prog && test "$pass" != link; then
+ newlib_search_path="$newlib_search_path $ladir"
+ deplibs="$lib $deplibs"
+@@ -2227,17 +2275,18 @@
+ need_relink=yes
+ fi
+ # This is a shared library
+-
+- # Warn about portability, can't link against -module's on some systems (darwin)
+- if test "$shouldnotlink" = yes && test "$pass" = link ; then
++
++ # Warn about portability, can't link against -module's on
++ # some systems (darwin)
++ if test "$shouldnotlink" = yes && test "$pass" = link ; then
+ $echo
+ if test "$linkmode" = prog; then
+ $echo "*** Warning: Linking the executable $output against the loadable module"
+ else
+ $echo "*** Warning: Linking the shared library $output against the loadable module"
+ fi
+- $echo "*** $linklib is not portable!"
+- fi
++ $echo "*** $linklib is not portable!"
++ fi
+ if test "$linkmode" = lib &&
+ test "$hardcode_into_libs" = yes; then
+ # Hardcode the library path.
+@@ -2295,9 +2344,10 @@
+ else
+ $show "extracting exported symbol list from \`$soname'"
+ save_ifs="$IFS"; IFS='~'
+- eval cmds=\"$extract_expsyms_cmds\"
++ cmds=$extract_expsyms_cmds
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -2308,9 +2358,10 @@
+ if test -f "$output_objdir/$newlib"; then :; else
+ $show "generating import library for \`$soname'"
+ save_ifs="$IFS"; IFS='~'
+- eval cmds=\"$old_archive_from_expsyms_cmds\"
++ cmds=$old_archive_from_expsyms_cmds
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -2333,9 +2384,9 @@
+ case $host in
+ *-*-sco3.2v5* ) add_dir="-L$dir" ;;
+ *-*-darwin* )
+- # if the lib is a module then we can not link against it, someone
+- # is ignoring the new warnings I added
+- if /usr/bin/file -L $add 2> /dev/null | grep "bundle" >/dev/null ; then
++ # if the lib is a module then we can not link against
++ # it, someone is ignoring the new warnings I added
++ if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then
+ $echo "** Warning, lib $linklib is a module, not a shared library"
+ if test -z "$old_library" ; then
+ $echo
+@@ -2343,7 +2394,7 @@
+ $echo "** The link will probably fail, sorry"
+ else
+ add="$dir/$old_library"
+- fi
++ fi
+ fi
+ esac
+ elif test "$hardcode_minus_L" = no; then
+@@ -2368,7 +2419,7 @@
+ if test -n "$inst_prefix_dir"; then
+ case "$libdir" in
+ [\\/]*)
+- add_dir="-L$inst_prefix_dir$libdir $add_dir"
++ add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+@@ -2385,7 +2436,7 @@
+
+ if test "$lib_linked" != yes; then
+ $echo "$modename: configuration error: unsupported hardcode properties"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test -n "$add_shlibpath"; then
+@@ -2428,7 +2479,8 @@
+ esac
+ add="-l$name"
+ elif test "$hardcode_automatic" = yes; then
+- if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then
++ if test -n "$inst_prefix_dir" &&
++ test -f "$inst_prefix_dir$libdir/$linklib" ; then
+ add="$inst_prefix_dir$libdir/$linklib"
+ else
+ add="$libdir/$linklib"
+@@ -2440,7 +2492,7 @@
+ if test -n "$inst_prefix_dir"; then
+ case "$libdir" in
+ [\\/]*)
+- add_dir="-L$inst_prefix_dir$libdir $add_dir"
++ add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+@@ -2507,9 +2559,10 @@
+ fi # link shared/static library?
+
+ if test "$linkmode" = lib; then
+- #if test -n "$dependency_libs" &&
+- # { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes ||
+- # test "$link_static" = yes; }; then
++ if test -n "$dependency_libs" &&
++ { test "$hardcode_into_libs" != yes ||
++ test "$build_old_libs" = yes ||
++ test "$link_static" = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+@@ -2523,7 +2576,7 @@
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+- #fi
++ fi
+
+ newlib_search_path="$newlib_search_path $absdir"
+ # Link against this library
+@@ -2565,20 +2618,18 @@
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ if test "$absdir" != "$libdir"; then
+- # Sure, some shells/systems don't implement the -ef.
+- # Those will have to live with the warning.
+- test "$absdir" -ef "$libdir" > /dev/null 2>&1 ||
+- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
++ $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+ fi
+ path="$absdir"
+ fi
+ depdepl=
+ case $host in
+ *-*-darwin*)
+- # we do not want to link against static libs, but need to link against shared
++ # we do not want to link against static libs,
++ # but need to link against shared
+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names" ; then
+ for tmp in $deplibrary_names ; do
+@@ -2586,43 +2637,42 @@
+ done
+ if test -f "$path/$depdepl" ; then
+ depdepl="$path/$depdepl"
+- fi
++ fi
+ # do not add paths which are already there
+ case " $newlib_search_path " in
+ *" $path "*) ;;
+ *) newlib_search_path="$newlib_search_path $path";;
+ esac
+- path=""
+ fi
++ path=""
+ ;;
+ *)
+- path="-L$path"
+- ;;
+- esac
+-
++ path="-L$path"
++ ;;
++ esac
+ ;;
+- -l*)
++ -l*)
+ case $host in
+ *-*-darwin*)
+- # Again, we only want to link against shared libraries
+- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+- for tmp in $newlib_search_path ; do
+- if test -f "$tmp/lib$tmp_libs.dylib" ; then
+- eval depdepl="$tmp/lib$tmp_libs.dylib"
+- break
+- fi
+- done
+- path=""
++ # Again, we only want to link against shared libraries
++ eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
++ for tmp in $newlib_search_path ; do
++ if test -f "$tmp/lib$tmp_libs.dylib" ; then
++ eval depdepl="$tmp/lib$tmp_libs.dylib"
++ break
++ fi
++ done
++ path=""
+ ;;
+ *) continue ;;
+- esac
++ esac
+ ;;
+ *) continue ;;
+ esac
+ case " $deplibs " in
+ *" $depdepl "*) ;;
+- *) deplibs="$deplibs $depdepl" ;;
+- esac
++ *) deplibs="$depdepl $deplibs" ;;
++ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$deplibs $path" ;;
+@@ -2712,7 +2762,8 @@
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+- # Last step: remove runtime libs from dependency_libs (they stay in deplibs)
++ # Last step: remove runtime libs from dependency_libs
++ # (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs ; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+@@ -2772,19 +2823,19 @@
+ case $outputname in
+ lib*)
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+- eval shared_ext=\"$shrext\"
++ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ if test "$module" = no; then
+ $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+- eval shared_ext=\"$shrext\"
++ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+@@ -2795,7 +2846,7 @@
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+- exit 1
++ exit $EXIT_FAILURE
+ else
+ $echo
+ $echo "*** Warning: Linking the shared library $output against the non-libtool"
+@@ -2843,13 +2894,13 @@
+ if test -n "$8"; then
+ $echo "$modename: too many parameters to \`-version-info'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+-
++
+ case $vinfo_number in
+ yes)
+ number_major="$2"
+@@ -2878,6 +2929,11 @@
+ age="$number_minor"
+ revision="$number_minor"
+ ;;
++ *)
++ $echo "$modename: unknown library version type \`$version_type'" 1>&2
++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
++ exit $EXIT_FAILURE
++ ;;
+ esac
+ ;;
+ no)
+@@ -2889,36 +2945,36 @@
+
+ # Check that each of the things are valid numbers.
+ case $current in
+- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ case $revision in
+- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ case $age in
+- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ if test "$age" -gt "$current"; then
+ $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Calculate the version variables.
+@@ -3007,7 +3063,7 @@
+ *)
+ $echo "$modename: unknown library version type \`$version_type'" 1>&2
+ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+@@ -3061,6 +3117,12 @@
+ *.$objext)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
++ if test "X$precious_files_regex" != "X"; then
++ if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
++ then
++ continue
++ fi
++ fi
+ removelist="$removelist $p"
+ ;;
+ *) ;;
+@@ -3097,7 +3159,7 @@
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+- if true || test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
++ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+@@ -3135,12 +3197,6 @@
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+- *-*-freebsd*-gnu*)
+- # Prevent $arg from being parsed by the freebsd regexp below.
+- if test "$build_libtool_need_lc" = "yes"; then
+- deplibs="$deplibs -lc"
+- fi
+- ;;
+ *-*-openbsd* | *-*-freebsd*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+@@ -3491,7 +3547,7 @@
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+- test "$mode" != relink && test "$fast_install" = no && rpath="$compile_rpath$rpath"
++ test "$mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+@@ -3546,7 +3602,7 @@
+ fi
+
+ # Get the real and link names of the library.
+- eval shared_ext=\"$shrext\"
++ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ realname="$2"
+@@ -3576,10 +3632,11 @@
+ $show "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $run $rm $export_symbols
+- eval cmds=\"$export_symbols_cmds\"
++ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ if len=`expr "X$cmd" : ".*"` &&
+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ $show "$cmd"
+@@ -3609,12 +3666,12 @@
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+- *)
++ *)
+ tmp_deplibs="$tmp_deplibs $test_deplib"
+ ;;
+ esac
+ done
+- deplibs="$tmp_deplibs"
++ deplibs="$tmp_deplibs"
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+@@ -3693,31 +3750,26 @@
+ $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+ fi
+
+- # Add all flags from the command line. We here create a library,
+- # but those flags were only added to compile_command and
+- # finalize_command, which are only used when creating executables.
+- # So do it by hand here.
+- compiler_flags="$compiler_flags $add_flags"
+- # Only add it to commands which use CC, instead of LD, i.e.
+- # only to $compiler_flags
+- #linker_flags="$linker_flags $add_flags"
+-
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+- eval cmds=\"$module_expsym_cmds\"
++ eval test_cmds=\"$module_expsym_cmds\"
++ cmds=$module_expsym_cmds
+ else
+- eval cmds=\"$module_cmds\"
++ eval test_cmds=\"$module_cmds\"
++ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+- eval cmds=\"$archive_expsym_cmds\"
++ eval test_cmds=\"$archive_expsym_cmds\"
++ cmds=$archive_expsym_cmds
+ else
+- eval cmds=\"$archive_cmds\"
++ eval test_cmds=\"$archive_cmds\"
++ cmds=$archive_cmds
+ fi
+ fi
+
+- if test "X$skipped_export" != "X:" && len=`expr "X$cmds" : ".*"` &&
++ if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` &&
+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+@@ -3818,19 +3870,28 @@
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
++ if test "$module" = yes && test -n "$module_cmds" ; then
++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
++ cmds=$module_expsym_cmds
++ else
++ cmds=$module_cmds
++ fi
++ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+- eval cmds=\"$archive_expsym_cmds\"
++ cmds=$archive_expsym_cmds
+ else
+- eval cmds=\"$archive_cmds\"
++ cmds=$archive_cmds
++ fi
+ fi
+
+ # Append the command to remove the reloadable object files
+ # to the just-reset $cmds.
+- eval cmds=\"\$cmds~$rm $delfiles\"
++ eval cmds=\"\$cmds~\$rm $delfiles\"
+ fi
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -3839,7 +3900,7 @@
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+@@ -3887,7 +3948,7 @@
+ *.lo)
+ if test -n "$objs$old_deplibs"; then
+ $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ libobj="$output"
+ obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+@@ -3981,10 +4042,11 @@
+ reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+ output="$obj"
+- eval cmds=\"$reload_cmds\"
++ cmds=$reload_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -3997,7 +4059,7 @@
+ $run ${rm}r $gentop
+ fi
+
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+@@ -4010,17 +4072,18 @@
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $run eval "echo timestamp > $libobj" || exit $?
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+- eval cmds=\"$reload_cmds\"
++ cmds=$reload_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -4032,7 +4095,7 @@
+ $run ${rm}r $gentop
+ fi
+
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+@@ -4350,7 +4413,7 @@
+ ;;
+ *)
+ $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ else
+@@ -4363,17 +4426,6 @@
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ fi
+
+- # AIX runtime linking requires linking programs with -Wl,-brtl and libs with -Wl,-G
+- # Also add -bnolibpath to the beginning of the link line, to clear the hardcoded runpath.
+- # Otherwise, things like the -L path to libgcc.a are accidentally hardcoded by ld.
+- # This does not apply on AIX for ia64, which uses a SysV linker.
+- case "$host" in
+- ia64-*-aix5*) ;;
+- *-*-aix4* | *-*-aix5*)
+- compile_command=`$echo "X$compile_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"`
+- finalize_command=`$echo "X$finalize_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` ;;
+- esac
+-
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ # Replace the output file specification.
+ compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+@@ -4449,7 +4501,7 @@
+ # Link the executable and exit
+ $show "$link_command"
+ $run eval "$link_command" || exit $?
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+
+ if test "$hardcode_action" = relink; then
+@@ -4504,10 +4556,10 @@
+ fi
+
+ # Quote $echo for shipping.
+- if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+- case $0 in
+- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+- *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
++ if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
++ case $progpath in
++ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
++ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+ esac
+ qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+ else
+@@ -4533,7 +4585,7 @@
+ cwrappersource=`$echo ${objdir}/lt-${output}.c`
+ cwrapper=`$echo ${output}.exe`
+ $rm $cwrappersource $cwrapper
+- trap "$rm $cwrappersource $cwrapper; exit 1" 1 2 15
++ trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+ cat > $cwrappersource <<EOF
+
+@@ -4542,7 +4594,7 @@
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+-
++
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+
+@@ -4574,7 +4626,7 @@
+ #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+ #define HAVE_DOS_BASED_FILE_SYSTEM
+-#ifndef DIR_SEPARATOR_2
++#ifndef DIR_SEPARATOR_2
+ #define DIR_SEPARATOR_2 '\\'
+ #endif
+ #endif
+@@ -4605,7 +4657,7 @@
+ {
+ char **newargz;
+ int i;
+-
++
+ program_name = (char *) xstrdup ((char *) basename (argv[0]));
+ newargz = XMALLOC(char *, argc+2);
+ EOF
+@@ -4618,7 +4670,7 @@
+ newargz[1] = fnqualify(argv[0]);
+ /* we know the script has the same name, without the .exe */
+ /* so make sure newargz[1] doesn't end in .exe */
+- strendzap(newargz[1],".exe");
++ strendzap(newargz[1],".exe");
+ for (i = 1; i < argc; i++)
+ newargz[i+1] = xstrdup(argv[i]);
+ newargz[argc+1] = NULL;
+@@ -4641,7 +4693,7 @@
+ return p;
+ }
+
+-char *
++char *
+ xstrdup (const char *string)
+ {
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
+@@ -4655,7 +4707,7 @@
+
+ #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+- if (isalpha (name[0]) && name[1] == ':')
++ if (isalpha (name[0]) && name[1] == ':')
+ name += 2;
+ #endif
+
+@@ -4665,7 +4717,7 @@
+ return (char *) base;
+ }
+
+-char *
++char *
+ fnqualify(const char *path)
+ {
+ size_t size;
+@@ -4693,7 +4745,7 @@
+ }
+
+ char *
+-strendzap(char *str, const char *pat)
++strendzap(char *str, const char *pat)
+ {
+ size_t len, patlen;
+
+@@ -4713,7 +4765,7 @@
+ }
+
+ static void
+-lt_error_core (int exit_status, const char * mode,
++lt_error_core (int exit_status, const char * mode,
+ const char * message, va_list ap)
+ {
+ fprintf (stderr, "%s: %s: ", program_name, mode);
+@@ -4742,7 +4794,7 @@
+ ;;
+ esac
+ $rm $output
+- trap "$rm $output; exit 1" 1 2 15
++ trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+
+ $echo > $output "\
+ #! $SHELL
+@@ -4842,7 +4894,7 @@
+ else
+ $echo \"\$relink_command_output\" >&2
+ $rm \"\$progdir/\$file\"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ fi
+
+@@ -4896,13 +4948,6 @@
+ "
+ ;;
+
+- *-*-freebsd* )
+- # Need to set LD_LIBRARY_PATH, to the value already
+- # computed within libtool.
+- $echo >> $output "\
+- LD_LIBRARY_PATH=\"$rpath\" exec \$progdir/\$program \${1+\"\$@\"}
+-"
+- ;;
+ *)
+ $echo >> $output "\
+ exec \$progdir/\$program \${1+\"\$@\"}
+@@ -4911,20 +4956,20 @@
+ esac
+ $echo >> $output "\
+ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ else
+ # The program doesn't exist.
+ \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+ \$echo \"This script is just a wrapper for \$program.\" 1>&2
+ $echo \"See the $PACKAGE documentation for more information.\" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ fi\
+ "
+ chmod +x $output
+ fi
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+@@ -5008,17 +5053,15 @@
+ done
+ fi
+
+- compiler_flags="$compiler_flags $add_flags"
+-
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+- eval cmds=\"$old_archive_from_new_cmds\"
++ cmds=$old_archive_from_new_cmds
+ else
+ eval cmds=\"$old_archive_cmds\"
+
+ if len=`expr "X$cmds" : ".*"` &&
+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+- :
++ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ $echo "using piecewise archive linking..."
+@@ -5045,7 +5088,7 @@
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+- done
++ done
+ for obj in $save_oldobjs
+ do
+ oldobjs="$objlist $obj"
+@@ -5059,7 +5102,7 @@
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj" ; then
+ RANLIB=$save_RANLIB
+- fi
++ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ objlist=
+@@ -5070,12 +5113,13 @@
+ if test "X$oldobjs" = "X" ; then
+ eval cmds=\"\$concat_cmds\"
+ else
+- eval cmds=\"\$concat_cmds~$old_archive_cmds\"
++ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
++ eval cmd=\"$cmd\"
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+@@ -5107,11 +5151,13 @@
+ fi
+ done
+ # Quote the link command for shipping.
+- relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)"
++ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ if test "$hardcode_automatic" = yes ; then
+- relink_command=
+- fi
++ relink_command=
++ fi
++
++
+ # Only create the output if not a dry run.
+ if test -z "$run"; then
+ for installed in no yes; do
+@@ -5129,7 +5175,7 @@
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ newdependency_libs="$newdependency_libs $libdir/$name"
+ ;;
+@@ -5143,7 +5189,7 @@
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ newdlfiles="$newdlfiles $libdir/$name"
+ done
+@@ -5154,11 +5200,30 @@
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ newdlprefiles="$newdlprefiles $libdir/$name"
+ done
+ dlprefiles="$newdlprefiles"
++ else
++ newdlfiles=
++ for lib in $dlfiles; do
++ case $lib in
++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
++ *) abs=`pwd`"/$lib" ;;
++ esac
++ newdlfiles="$newdlfiles $abs"
++ done
++ dlfiles="$newdlfiles"
++ newdlprefiles=
++ for lib in $dlprefiles; do
++ case $lib in
++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
++ *) abs=`pwd`"/$lib" ;;
++ esac
++ newdlprefiles="$newdlprefiles $abs"
++ done
++ dlprefiles="$newdlprefiles"
+ fi
+ $rm $output
+ # place dlname in correct position for cygwin
+@@ -5202,7 +5267,7 @@
+
+ # Directory that this library needs to be installed in:
+ libdir='$install_libdir'"
+- if test "$installed" = no && test "$need_relink" = yes && test "$fast_install" = no; then
++ if test "$installed" = no && test "$need_relink" = yes; then
+ $echo >> $output "\
+ relink_command=\"$relink_command\""
+ fi
+@@ -5215,7 +5280,7 @@
+ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+ ;;
+ esac
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ # libtool install mode
+@@ -5304,13 +5369,13 @@
+ if test -z "$install_prog"; then
+ $echo "$modename: you must specify an install program" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test -n "$prev"; then
+ $echo "$modename: the \`$prev' option requires an argument" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test -z "$files"; then
+@@ -5320,7 +5385,7 @@
+ $echo "$modename: you must specify a destination" 1>&2
+ fi
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Strip any trailing slash from the destination.
+@@ -5341,7 +5406,7 @@
+ if test "$#" -gt 2; then
+ $echo "$modename: \`$dest' is not a directory" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ fi
+ case $destdir in
+@@ -5353,7 +5418,7 @@
+ *)
+ $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ done
+@@ -5382,7 +5447,7 @@
+ else
+ $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ library_names=
+@@ -5424,7 +5489,7 @@
+ # but it's something to keep an eye on.
+ if test "$inst_prefix_dir" = "$destdir"; then
+ $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test -n "$inst_prefix_dir"; then
+@@ -5439,7 +5504,7 @@
+ if $run eval "$relink_command"; then :
+ else
+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ fi
+
+@@ -5474,10 +5539,11 @@
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+- eval cmds=\"$postinstall_cmds\"
++ cmds=$postinstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -5517,7 +5583,7 @@
+ *)
+ $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+@@ -5535,7 +5601,7 @@
+ $show "$install_prog $staticobj $staticdest"
+ $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+ fi
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+@@ -5589,7 +5655,7 @@
+ # Check the variables that should have been set.
+ if test -z "$notinst_deplibs"; then
+ $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ finalize=yes
+@@ -5630,8 +5696,12 @@
+ tmpdir="/tmp"
+ test -n "$TMPDIR" && tmpdir="$TMPDIR"
+ tmpdir="$tmpdir/libtool-$$"
+- if $mkdir "$tmpdir" && chmod 700 "$tmpdir"; then :
++ save_umask=`umask`
++ umask 0077
++ if $mkdir "$tmpdir"; then
++ umask $save_umask
+ else
++ umask $save_umask
+ $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+ continue
+ fi
+@@ -5690,16 +5760,17 @@
+ $show "$install_prog $file $oldlib"
+ $run eval "$install_prog \$file \$oldlib" || exit $?
+
+- if test -n "$stripme" && test -n "$striplib"; then
++ if test -n "$stripme" && test -n "$old_striplib"; then
+ $show "$old_striplib $oldlib"
+ $run eval "$old_striplib $oldlib" || exit $?
+ fi
+
+ # Do each command in the postinstall commands.
+- eval cmds=\"$old_postinstall_cmds\"
++ cmds=$old_postinstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -5713,9 +5784,9 @@
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ test -n "$run" && current_libdirs=" -n$current_libdirs"
+- exec_cmd='$SHELL $0 --finish$current_libdirs'
++ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+ ;;
+
+@@ -5734,10 +5805,11 @@
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+- eval cmds=\"$finish_cmds\"
++ cmds=$finish_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || admincmds="$admincmds
+ $cmd"
+@@ -5754,7 +5826,7 @@
+ fi
+
+ # Exit here if they wanted silent mode.
+- exit 0
++ test "$show" = : && exit $EXIT_SUCCESS
+
+ $echo "----------------------------------------------------------------------"
+ $echo "Libraries have been installed in:"
+@@ -5790,7 +5862,7 @@
+ $echo "See any operating system documentation about shared libraries for"
+ $echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ $echo "----------------------------------------------------------------------"
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ # libtool execute mode
+@@ -5802,7 +5874,7 @@
+ if test -z "$cmd"; then
+ $echo "$modename: you must specify a COMMAND" 1>&2
+ $echo "$help"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Handle -dlopen flags immediately.
+@@ -5810,7 +5882,7 @@
+ if test ! -f "$file"; then
+ $echo "$modename: \`$file' is not a file" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ dir=
+@@ -5821,7 +5893,7 @@
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Read the libtool library.
+@@ -5848,7 +5920,7 @@
+ dir="$dir/$objdir"
+ else
+ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ ;;
+
+@@ -5928,7 +6000,7 @@
+ $echo "export $shlibpath_var"
+ fi
+ $echo "$cmd$args"
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+ ;;
+
+@@ -5956,7 +6028,7 @@
+ if test -z "$rm"; then
+ $echo "$modename: you must specify an RM program" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ rmdirs=
+@@ -6011,10 +6083,11 @@
+ if test "$mode" = uninstall; then
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+- eval cmds=\"$postuninstall_cmds\"
++ cmds=$postuninstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd"
+ if test "$?" -ne 0 && test "$rmforce" != yes; then
+@@ -6026,10 +6099,11 @@
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+- eval cmds=\"$old_postuninstall_cmds\"
++ cmds=$old_postuninstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd"
+ if test "$?" -ne 0 && test "$rmforce" != yes; then
+@@ -6068,7 +6142,7 @@
+ if test "$mode" = clean ; then
+ noexename=$name
+ case $file in
+- *.exe)
++ *.exe)
+ file=`$echo $file|${SED} 's,.exe$,,'`
+ noexename=`$echo $name|${SED} 's,.exe$,,'`
+ # $file with .exe has already been added to rmfiles,
+@@ -6113,20 +6187,20 @@
+ "")
+ $echo "$modename: you must specify a MODE" 1>&2
+ $echo "$generic_help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ if test -z "$exec_cmd"; then
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$generic_help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ fi # test -z "$show_help"
+
+ if test -n "$exec_cmd"; then
+ eval exec $exec_cmd
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # We need to display help for each of the modes.
+@@ -6162,7 +6236,7 @@
+ a more detailed description of MODE.
+
+ Report bugs to <bug-libtool@gnu.org>."
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ clean)
+@@ -6274,6 +6348,8 @@
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
++ -precious-files-regex REGEX
++ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+@@ -6315,14 +6391,14 @@
+ *)
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ $echo
+ $echo "Try \`$modename --help' for more information about other modes."
+
+-exit 0
++exit $EXIT_SUCCESS
+
+ # The TAGs below are defined such that we never get into a situation
+ # in which we disable both kinds of libraries. Given conflicting
Added: trunk/packages/kdenetwork/debian/patches/07_disable_no_undefined.diff
===================================================================
--- trunk/packages/kdenetwork/debian/patches/07_disable_no_undefined.diff 2005-06-29 09:16:51 UTC (rev 1237)
+++ trunk/packages/kdenetwork/debian/patches/07_disable_no_undefined.diff 2005-07-01 18:41:04 UTC (rev 1238)
@@ -0,0 +1,18 @@
+--- a/admin/acinclude.m4.in
++++ b/admin/acinclude.m4.in
+@@ -1690,15 +1690,6 @@
+ KDE_USE_CLOSURE_TRUE="#"
+ KDE_USE_CLOSURE_FALSE=""
+ KDE_NO_UNDEFINED=""
+- case $host in
+- *-*-linux-gnu)
+- KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined],
+- [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined],
+- [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"],
+- [KDE_NO_UNDEFINED=""])],
+- [KDE_NO_UNDEFINED=""])
+- ;;
+- esac
+ fi
+ AC_SUBST(KDE_USE_CLOSURE_TRUE)
+ AC_SUBST(KDE_USE_CLOSURE_FALSE)
Modified: trunk/packages/kdenetwork/debian/patches/13_improve-libgadu-detection.diff
===================================================================
--- trunk/packages/kdenetwork/debian/patches/13_improve-libgadu-detection.diff 2005-06-29 09:16:51 UTC (rev 1237)
+++ trunk/packages/kdenetwork/debian/patches/13_improve-libgadu-detection.diff 2005-07-01 18:41:04 UTC (rev 1238)
@@ -23,53 +23,3 @@
if ( maj != 1 ) {
return 1;
}
---- kdenetwork/configure
-+++ kdenetwork/configure
-@@ -37366,8 +37366,20 @@
- int main()
- {
- #if defined __GG_LIBGADU_HAVE_PTHREAD && defined GG_LOGIN60
-- int maj, min, date;
-- sscanf( gg_libgadu_version(), "%u.%u.%u", &maj,&min,&date );
-+ int maj, min, date, items;
-+ const char *libgadu_version = gg_libgadu_version();
-+
-+ items = sscanf( libgadu_version, "%u.%u.%u", &maj,&min,&date );
-+
-+ if ( items != 3 ) { /* version in YYYYDDMM format only */
-+ sscanf( libgadu_version, "%u", &date );
-+
-+ if ( date < 20040520 )
-+ return 1;
-+ else
-+ return 0;
-+ }
-+
- if ( maj != 1 ) {
- return 1;
- }
---- kdenetwork/configure.in
-+++ kdenetwork/configure.in
-@@ -596,8 +596,20 @@
- int main()
- {
- #if defined __GG_LIBGADU_HAVE_PTHREAD && defined GG_LOGIN60
-- int maj, min, date;
-- sscanf( gg_libgadu_version(), "%u.%u.%u", &maj,&min,&date );
-+ int maj, min, date, items;
-+ const char *libgadu_version = gg_libgadu_version();
-+
-+ items = sscanf( libgadu_version, "%u.%u.%u", &maj,&min,&date );
-+
-+ if ( items != 3 ) { /* version in YYYYDDMM format only */
-+ sscanf( libgadu_version, "%u", &date );
-+
-+ if ( date < 20040520 )
-+ return 1;
-+ else
-+ return 0;
-+ }
-+
- if ( maj != 1 ) {
- return 1;
- }