[Pkg-kde-commits] rev 1890 - in kde-extras: . kfocus
kfocus/branches kfocus/branches/upstream
kfocus/branches/upstream/current
kfocus/branches/upstream/current/admin
kfocus/branches/upstream/current/doc
kfocus/branches/upstream/current/doc/en
kfocus/branches/upstream/current/kfocus
kfocus/branches/upstream/current/po
Mark Purcell
msp at costa.debian.org
Sun Oct 2 13:46:42 UTC 2005
Author: msp
Date: 2005-10-02 13:45:49 +0000 (Sun, 02 Oct 2005)
New Revision: 1890
Added:
kde-extras/kfocus/
kde-extras/kfocus/branches/
kde-extras/kfocus/branches/upstream/
kde-extras/kfocus/branches/upstream/current/
kde-extras/kfocus/branches/upstream/current/Makefile.am
kde-extras/kfocus/branches/upstream/current/Makefile.in
kde-extras/kfocus/branches/upstream/current/acinclude.m4
kde-extras/kfocus/branches/upstream/current/aclocal.m4
kde-extras/kfocus/branches/upstream/current/admin/
kde-extras/kfocus/branches/upstream/current/admin/Makefile.common
kde-extras/kfocus/branches/upstream/current/admin/acinclude.m4.in
kde-extras/kfocus/branches/upstream/current/admin/am_edit
kde-extras/kfocus/branches/upstream/current/admin/conf.change.pl
kde-extras/kfocus/branches/upstream/current/admin/config.guess
kde-extras/kfocus/branches/upstream/current/admin/config.pl
kde-extras/kfocus/branches/upstream/current/admin/config.sub
kde-extras/kfocus/branches/upstream/current/admin/configure.in.min
kde-extras/kfocus/branches/upstream/current/admin/debianrules
kde-extras/kfocus/branches/upstream/current/admin/depcomp
kde-extras/kfocus/branches/upstream/current/admin/install-sh
kde-extras/kfocus/branches/upstream/current/admin/libtool.m4.in
kde-extras/kfocus/branches/upstream/current/admin/ltcf-c.sh
kde-extras/kfocus/branches/upstream/current/admin/ltcf-cxx.sh
kde-extras/kfocus/branches/upstream/current/admin/ltcf-gcj.sh
kde-extras/kfocus/branches/upstream/current/admin/ltconfig
kde-extras/kfocus/branches/upstream/current/admin/ltmain.sh
kde-extras/kfocus/branches/upstream/current/admin/missing
kde-extras/kfocus/branches/upstream/current/admin/mkinstalldirs
kde-extras/kfocus/branches/upstream/current/admin/ylwrap
kde-extras/kfocus/branches/upstream/current/config.h.in
kde-extras/kfocus/branches/upstream/current/configure
kde-extras/kfocus/branches/upstream/current/configure.in
kde-extras/kfocus/branches/upstream/current/doc/
kde-extras/kfocus/branches/upstream/current/doc/Makefile.in
kde-extras/kfocus/branches/upstream/current/doc/en/
kde-extras/kfocus/branches/upstream/current/doc/en/Makefile.in
kde-extras/kfocus/branches/upstream/current/kfocus/
kde-extras/kfocus/branches/upstream/current/kfocus/Makefile.am
kde-extras/kfocus/branches/upstream/current/kfocus/Makefile.in
kde-extras/kfocus/branches/upstream/current/kfocus/kfmproject.cpp
kde-extras/kfocus/branches/upstream/current/kfocus/kfmproject.h
kde-extras/kfocus/branches/upstream/current/kfocus/kfmprojectlist.cpp
kde-extras/kfocus/branches/upstream/current/kfocus/kfmprojectlist.h
kde-extras/kfocus/branches/upstream/current/kfocus/kfocus.cpp
kde-extras/kfocus/branches/upstream/current/kfocus/kfocus.h
kde-extras/kfocus/branches/upstream/current/kfocus/kfvprojectlist.cpp
kde-extras/kfocus/branches/upstream/current/kfocus/kfvprojectlist.h
kde-extras/kfocus/branches/upstream/current/po/
kde-extras/kfocus/branches/upstream/current/po/Makefile.in
kde-extras/kfocus/branches/upstream/current/stamp-h.in
kde-extras/kfocus/tags/
Log:
[svn-inject] Installing original source of kfocus
Added: kde-extras/kfocus/branches/upstream/current/Makefile.am
===================================================================
--- kde-extras/kfocus/branches/upstream/current/Makefile.am 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/Makefile.am 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,31 @@
+####### kdevelop will overwrite this part!!! (begin)##########
+
+SUBDIRS = kfocus po doc
+
+EXTRA_DIST = kfocus.kdevprj AUTHORS COPYING ChangeLog INSTALL README TODO kfocus.lsm
+
+####### kdevelop will overwrite this part!!! (end)############
+# not a GNU package. You can remove this line, if
+# have all needed files, that a GNU package needs
+AUTOMAKE_OPTIONS = foreign
+
+$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
+ cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
+
+$(top_srcdir)/subdirs:
+ cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
+
+$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
+ @cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
+
+MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files
+
+package-messages:
+ $(MAKE) -f admin/Makefile.common package-messages
+ $(MAKE) -C po merge
+
+EXTRA_DIST = admin
+
+dist-hook:
+ cd $(top_distdir) && perl admin/am_edit -padmin
+ cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
Added: kde-extras/kfocus/branches/upstream/current/Makefile.in
===================================================================
--- kde-extras/kfocus/branches/upstream/current/Makefile.in 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/Makefile.in 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,561 @@
+# KDE tags expanded automatically by am_edit - $Revision: 1.1.1.1 $
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+####### kdevelop will overwrite this part!!! (begin)##########
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+#>-
+bindir = @bindir@
+#>+ 3
+DEPDIR = .deps
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+ARTSCCONFIG = @ARTSCCONFIG@
+AS = @AS@
+AUTODIRS = @AUTODIRS@
+CC = @CC@
+CONF_FILES = @CONF_FILES@
+CPP = @CPP@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DCOPIDL = @DCOPIDL@
+DCOPIDL2CPP = @DCOPIDL2CPP@
+DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
+DLLTOOL = @DLLTOOL@
+DPMSINC = @DPMSINC@
+DPMSLIB = @DPMSLIB@
+EXEEXT = @EXEEXT@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+GLINC = @GLINC@
+GLLIB = @GLLIB@
+GMSGFMT = @GMSGFMT@
+IDL = @IDL@
+IDL_DEPENDENCIES = @IDL_DEPENDENCIES@
+KDB2HTML = @KDB2HTML@
+KDECONFIG = @KDECONFIG@
+KDE_CXXFLAGS = @KDE_CXXFLAGS@
+KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
+KDE_INCLUDES = @KDE_INCLUDES@
+KDE_LDFLAGS = @KDE_LDFLAGS@
+KDE_PLUGIN = @KDE_PLUGIN@
+KDE_RPATH = @KDE_RPATH@
+KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
+KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
+KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
+KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
+LIBCOMPAT = @LIBCOMPAT@
+LIBCRYPT = @LIBCRYPT@
+LIBDL = @LIBDL@
+LIBJPEG = @LIBJPEG@
+LIBMICO = @LIBMICO@
+LIBOBJS = @LIBOBJS@
+LIBPNG = @LIBPNG@
+LIBPTHREAD = @LIBPTHREAD@
+LIBPYTHON = @LIBPYTHON@
+LIBQIMGIO = @LIBQIMGIO@
+LIBSM = @LIBSM@
+LIBSOCKET = @LIBSOCKET@
+LIBTIFF = @LIBTIFF@
+LIBTOOL = @LIBTOOL@
+LIBUCB = @LIBUCB@
+LIBZ = @LIBZ@
+LIB_KAB = @LIB_KAB@
+LIB_KDECORE = @LIB_KDECORE@
+LIB_KDEUI = @LIB_KDEUI@
+LIB_KFILE = @LIB_KFILE@
+LIB_KFM = @LIB_KFM@
+LIB_KFORMULA = @LIB_KFORMULA@
+LIB_KHTML = @LIB_KHTML@
+LIB_KIMGIO = @LIB_KIMGIO@
+LIB_KIO = @LIB_KIO@
+LIB_KPARTS = @LIB_KPARTS@
+LIB_KSPELL = @LIB_KSPELL@
+LIB_KSYCOCA = @LIB_KSYCOCA@
+LIB_KWRITE = @LIB_KWRITE@
+LIB_QT = @LIB_QT@
+LIB_SMB = @LIB_SMB@
+LIB_X11 = @LIB_X11@
+LN_S = @LN_S@
+MAKEINFO = @MAKEINFO@
+MCOPIDL = @MCOPIDL@
+MICO_INCLUDES = @MICO_INCLUDES@
+MICO_LDFLAGS = @MICO_LDFLAGS@
+MOC = @MOC@
+MSGFMT = @MSGFMT@
+NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
+NOREPO = @NOREPO@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PAMINC = @PAMINC@
+PAMLIBPATHS = @PAMLIBPATHS@
+PAMLIBS = @PAMLIBS@
+PYTHONINC = @PYTHONINC@
+PYTHONLIB = @PYTHONLIB@
+PYTHONMODDIR = @PYTHONMODDIR@
+QT_INCLUDES = @QT_INCLUDES@
+QT_LDFLAGS = @QT_LDFLAGS@
+RANLIB = @RANLIB@
+REPO = @REPO@
+STRIP = @STRIP@
+TOPSUBDIRS = @TOPSUBDIRS@
+UIC = @UIC@
+USER_INCLUDES = @USER_INCLUDES@
+USER_LDFLAGS = @USER_LDFLAGS@
+USE_EXCEPTIONS = @USE_EXCEPTIONS@
+USE_RTTI = @USE_RTTI@
+USE_THREADS = @USE_THREADS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XPMINC = @XPMINC@
+XPMLIB = @XPMLIB@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_INCLUDES = @X_INCLUDES@
+X_LDFLAGS = @X_LDFLAGS@
+X_PRE_LIBS = @X_PRE_LIBS@
+all_includes = @all_includes@
+all_libraries = @all_libraries@
+idldir = @idldir@
+kde_appsdir = @kde_appsdir@
+kde_bindir = @kde_bindir@
+kde_confdir = @kde_confdir@
+kde_datadir = @kde_datadir@
+kde_htmldir = @kde_htmldir@
+kde_icondir = @kde_icondir@
+kde_includes = @kde_includes@
+kde_libraries = @kde_libraries@
+kde_libs_htmldir = @kde_libs_htmldir@
+kde_libs_prefix = @kde_libs_prefix@
+kde_locale = @kde_locale@
+kde_mimedir = @kde_mimedir@
+kde_moduledir = @kde_moduledir@
+kde_servicesdir = @kde_servicesdir@
+kde_servicetypesdir = @kde_servicetypesdir@
+kde_sounddir = @kde_sounddir@
+kde_templatesdir = @kde_templatesdir@
+kde_wallpaperdir = @kde_wallpaperdir@
+micodir = @micodir@
+qt_includes = @qt_includes@
+qt_libraries = @qt_libraries@
+x_includes = @x_includes@
+x_libraries = @x_libraries@
+
+SUBDIRS = kfocus po doc
+
+EXTRA_DIST = admin
+
+####### kdevelop will overwrite this part!!! (end)############
+# not a GNU package. You can remove this line, if
+# have all needed files, that a GNU package needs
+AUTOMAKE_OPTIONS = foreign
+
+MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
+Makefile.am Makefile.in TODO acinclude.m4 aclocal.m4 config.h.in \
+configure configure.in
+
+
+#>- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+#>+ 4
+KDE_DIST=Makefile.dist configure.in.in kfocus.kdevprj kfocus.lsm
+
+DISTFILES= $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
+
+
+TAR = gtar
+GZIP_ENV = --best
+#>- all: all-redirect
+#>+ 1
+all: docs-am all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+#>- cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps ./Makefile
+#>+ 2
+ cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps ./Makefile
+ cd $(top_srcdir) && perl admin/am_edit Makefile.in
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) \
+ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): configure.in acinclude.m4
+ cd $(srcdir) && $(ACLOCAL)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+ cd $(srcdir) && $(AUTOCONF)
+
+config.h: stamp-h
+ @if test ! -f $@; then \
+ rm -f stamp-h; \
+ $(MAKE) stamp-h; \
+ else :; fi
+stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
+ cd $(top_builddir) \
+ && CONFIG_FILES= CONFIG_HEADERS=config.h \
+ $(SHELL) ./config.status
+ @echo timestamp > stamp-h 2> /dev/null
+$(srcdir)/config.h.in: $(srcdir)/stamp-h.in
+ @if test ! -f $@; then \
+ rm -f $(srcdir)/stamp-h.in; \
+ $(MAKE) $(srcdir)/stamp-h.in; \
+ else :; fi
+$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && $(AUTOHEADER)
+ @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
+
+mostlyclean-hdr:
+
+clean-hdr:
+
+distclean-hdr:
+ -rm -f config.h
+
+maintainer-clean-hdr:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+ at SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+ rev="$$subdir $$rev"; \
+ test "$$subdir" = "." && dot_seen=yes; \
+ done; \
+ test "$$dot_seen" = "no" && rev=". $$rev"; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ here=`pwd` && cd $(srcdir) \
+ && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
+ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+ -rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ -rm -rf $(distdir)
+ GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+ mkdir $(distdir)/=build
+ mkdir $(distdir)/=inst
+ dc_install_base=`cd $(distdir)/=inst && pwd`; \
+ cd $(distdir)/=build \
+ && ../configure --srcdir=.. --prefix=$$dc_install_base \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) dist
+ -rm -rf $(distdir)
+ @banner="$(distdir).tar.gz is ready for distribution"; \
+ dashes=`echo "$$banner" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ echo "$$dashes"
+dist: distdir
+ -chmod -R a+r $(distdir)
+ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ -rm -rf $(distdir)
+dist-all: distdir
+ -chmod -R a+r $(distdir)
+ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ -rm -rf $(distdir)
+distdir: $(DISTFILES)
+ -rm -rf $(distdir)
+ mkdir $(distdir)
+ -chmod 777 $(distdir)
+#>- @for file in $(DISTFILES); do \
+#>- d=$(srcdir); \
+#>- if test -d $$d/$$file; then \
+#>- cp -pr $$/$$file $(distdir)/$$file; \
+#>- else \
+#>- test -f $(distdir)/$$file \
+#>- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+#>- || cp -p $$d/$$file $(distdir)/$$file || :; \
+#>- fi; \
+#>- done
+#>+ 10
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+ for subdir in $(SUBDIRS); do \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ chmod 777 $(distdir)/$$subdir; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+ || exit 1; \
+ fi; \
+ done
+ $(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+all-recursive-am: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am:
+uninstall: uninstall-recursive
+all-am: Makefile config.h
+all-redirect: all-recursive-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am: clean-hdr clean-tags clean-generic mostlyclean-am
+
+#>- clean: clean-recursive
+#>+ 1
+clean: kde-rpo-clean clean-recursive
+
+distclean-am: distclean-hdr distclean-tags distclean-generic clean-am
+ -rm -f libtool
+
+distclean: distclean-recursive
+ -rm -f config.status
+
+maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \
+ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f config.status
+
+.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
+install-data-recursive uninstall-data-recursive install-exec-recursive \
+uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
+all-recursive check-recursive installcheck-recursive info-recursive \
+dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
+install-exec-am install-exec install-data-am install-data install-am \
+install uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
+ cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
+
+$(top_srcdir)/subdirs:
+ cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
+
+$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
+ @cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
+
+package-messages:
+ $(MAKE) -f admin/Makefile.common package-messages
+ $(MAKE) -C po merge
+
+dist-hook:
+ cd $(top_distdir) && perl admin/am_edit -padmin
+ cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
+
+#>+ 2
+docs-am:
+
+#>+ 5
+force-reedit:
+ cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps ./Makefile
+ cd $(top_srcdir) && perl admin/am_edit Makefile.in
+
+
+#>+ 2
+final:
+ $(MAKE) all-am
+#>+ 2
+no-final:
+ $(MAKE) all-am
+#>+ 3
+cvs-clean:
+ $(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean
+
+#>+ 3
+kde-rpo-clean:
+ -rm -f *.rpo
Added: kde-extras/kfocus/branches/upstream/current/acinclude.m4
===================================================================
--- kde-extras/kfocus/branches/upstream/current/acinclude.m4 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/acinclude.m4 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,4903 @@
+## -*- autoconf -*-
+
+dnl This file is part of the KDE libraries/packages
+dnl Copyright (C) 1997 Janos Farkas (chexum at shadow.banki.hu)
+dnl (C) 1997,98,99 Stephan Kulow (coolo at kde.org)
+
+dnl This file is free software; you can redistribute it and/or
+dnl modify it under the terms of the GNU Library General Public
+dnl License as published by the Free Software Foundation; either
+dnl version 2 of the License, or (at your option) any later version.
+
+dnl This library is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+dnl Library General Public License for more details.
+
+dnl You should have received a copy of the GNU Library General Public License
+dnl along with this library; see the file COPYING.LIB. If not, write to
+dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+dnl Boston, MA 02111-1307, USA.
+
+dnl IMPORTANT NOTE:
+dnl Please do not modify this file unless you expect your modifications to be
+dnl carried into every other module in the repository. If you decide that you
+dnl really want to modify it, contact coolo at kde.org mentioning that you have
+dnl and that the modified file should be committed to every module.
+dnl
+dnl Single-module modifications are best placed in configure.in for kdelibs
+dnl and kdebase or configure.in.in if present.
+
+
+dnl ------------------------------------------------------------------------
+dnl Find a file (or one of more files in a list of dirs)
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_FIND_FILE,
+[
+$3=NO
+for i in $2;
+do
+ for j in $1;
+ do
+ if test -r "$i/$j"; then
+ $3=$i
+ break 2
+ fi
+ done
+done
+])
+
+dnl KDE_FIND_PATH(programm-name, variable-name, list of directories,
+dnl if-not-found, test-parameter)
+AC_DEFUN(KDE_FIND_PATH,
+[
+ AC_MSG_CHECKING([for $1])
+ if test -n "$$2"; then
+ kde_cv_path="$$2";
+ else
+ kde_cache=`echo $1 | sed 'y%./+-%__p_%'`
+
+ AC_CACHE_VAL(kde_cv_path_$kde_cache,
+ [
+ kde_cv_path="NONE"
+ dirs="$3"
+ kde_save_IFS=$IFS
+ IFS=':'
+ for dir in $PATH; do
+ dirs="$dirs $dir"
+ done
+ IFS=$kde_save_IFS
+
+ for dir in $dirs; do
+ if test -x "$dir/$1"; then
+ if test -n "$5"
+ then
+ evalstr="$dir/$1 $5 2>&1 "
+ if eval $evalstr; then
+ kde_cv_path="$dir/$1"
+ break
+ fi
+ else
+ kde_cv_path="$dir/$1"
+ break
+ fi
+ fi
+ done
+
+ eval "kde_cv_path_$kde_cache=$kde_cv_path"
+
+ ])
+
+ eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
+
+ fi
+
+ if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
+ AC_MSG_RESULT(not found)
+ $4
+ else
+ AC_MSG_RESULT($kde_cv_path)
+ $2=$kde_cv_path
+
+ fi
+])
+
+AC_DEFUN(KDE_MOC_ERROR_MESSAGE,
+[
+ AC_MSG_ERROR([No Qt meta object compiler (moc) found!
+Please check whether you installed Qt correctly.
+You need to have a running moc binary.
+configure tried to run $ac_cv_path_moc and the test didn't
+succeed. If configure shouldn't have tried this one, set
+the environment variable MOC to the right one before running
+configure.
+])
+])
+
+AC_DEFUN(KDE_UIC_ERROR_MESSAGE,
+[
+ AC_MSG_WARN([No Qt ui compiler (uic) found!
+Please check whether you installed Qt correctly.
+You need to have a running uic binary.
+configure tried to run $ac_cv_path_uic and the test didn't
+succeed. If configure shouldn't have tried this one, set
+the environment variable UIC to the right one before running
+configure.
+])
+])
+
+dnl ------------------------------------------------------------------------
+dnl Find the meta object compiler and the ui compiler in the PATH,
+dnl in $QTDIR/bin, and some more usual places
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_PATH_QT_MOC_UIC,
+[
+ qt_bindirs=""
+ for dir in $kde_qt_dirs; do
+ qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc"
+ done
+ qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin"
+ if test ! "$ac_qt_bindir" = "NO"; then
+ qt_bindirs="$ac_qt_bindir $qt_bindirs"
+ fi
+
+ KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE])
+ KDE_FIND_PATH(uic, UIC, [$qt_bindirs], [UIC="" ; KDE_UIC_ERROR_MESSAGE])
+ if test -z "$UIC" ; then
+ if test -z "$UIC_NOT_NEEDED" ; then
+ exit 1
+ else
+ UIC="echo uic not available: "
+ fi
+ fi
+ AC_SUBST(MOC)
+ AC_SUBST(UIC)
+])
+
+AC_DEFUN(KDE_1_CHECK_PATHS,
+[
+ KDE_1_CHECK_PATH_HEADERS
+
+ KDE_TEST_RPATH=
+
+ if test -n "$USE_RPATH"; then
+
+ if test -n "$kde_libraries"; then
+ KDE_TEST_RPATH="-R $kde_libraries"
+ fi
+
+ if test -n "$qt_libraries"; then
+ KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries"
+ fi
+
+ if test -n "$x_libraries"; then
+ KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries"
+ fi
+
+ KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH"
+ fi
+
+AC_MSG_CHECKING([for KDE libraries installed])
+ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5'
+
+if AC_TRY_EVAL(ac_link) && test -s conftest; then
+ AC_MSG_RESULT(yes)
+else
+ AC_MSG_ERROR([your system fails at linking a small KDE application!
+Check, if your compiler is installed correctly and if you have used the
+same compiler to compile Qt and kdelibs as you did use now.
+For more details about this problem, look at the end of config.log.])
+fi
+
+if eval `KDEDIR= ./conftest 2>&5`; then
+ kde_result=done
+else
+ kde_result=problems
+fi
+
+KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
+kde_have_all_paths=yes
+
+KDE_SET_PATHS($kde_result)
+
+])
+
+AC_DEFUN(KDE_SET_PATHS,
+[
+ kde_cv_all_paths="kde_have_all_paths=\"yes\" \
+ kde_htmldir=\"$kde_htmldir\" \
+ kde_appsdir=\"$kde_appsdir\" \
+ kde_icondir=\"$kde_icondir\" \
+ kde_sounddir=\"$kde_sounddir\" \
+ kde_datadir=\"$kde_datadir\" \
+ kde_locale=\"$kde_locale\" \
+ kde_cgidir=\"$kde_cgidir\" \
+ kde_confdir=\"$kde_confdir\" \
+ kde_mimedir=\"$kde_mimedir\" \
+ kde_toolbardir=\"$kde_toolbardir\" \
+ kde_wallpaperdir=\"$kde_wallpaperdir\" \
+ kde_templatesdir=\"$kde_templatesdir\" \
+ kde_bindir=\"$kde_bindir\" \
+ kde_servicesdir=\"$kde_servicesdir\" \
+ kde_servicetypesdir=\"$kde_servicetypesdir\" \
+ kde_moduledir=\"$kde_moduledir\" \
+ kde_result=$1"
+])
+
+AC_DEFUN(KDE_SET_DEFAULT_PATHS,
+[
+if test "$1" = "default"; then
+
+ if test -z "$kde_htmldir"; then
+ kde_htmldir='\${prefix}/share/doc/HTML'
+ fi
+ if test -z "$kde_appsdir"; then
+ kde_appsdir='\${prefix}/share/applnk'
+ fi
+ if test -z "$kde_icondir"; then
+ kde_icondir='\${prefix}/share/icons'
+ fi
+ if test -z "$kde_sounddir"; then
+ kde_sounddir='\${prefix}/share/sounds'
+ fi
+ if test -z "$kde_datadir"; then
+ kde_datadir='\${prefix}/share/apps'
+ fi
+ if test -z "$kde_locale"; then
+ kde_locale='\${prefix}/share/locale'
+ fi
+ if test -z "$kde_cgidir"; then
+ kde_cgidir='\${exec_prefix}/cgi-bin'
+ fi
+ if test -z "$kde_confdir"; then
+ kde_confdir='\${prefix}/share/config'
+ fi
+ if test -z "$kde_mimedir"; then
+ kde_mimedir='\${prefix}/share/mimelnk'
+ fi
+ if test -z "$kde_toolbardir"; then
+ kde_toolbardir='\${prefix}/share/toolbar'
+ fi
+ if test -z "$kde_wallpaperdir"; then
+ kde_wallpaperdir='\${prefix}/share/wallpapers'
+ fi
+ if test -z "$kde_templatesdir"; then
+ kde_templatesdir='\${prefix}/share/templates'
+ fi
+ if test -z "$kde_bindir"; then
+ kde_bindir='\${exec_prefix}/bin'
+ fi
+ if test -z "$kde_servicesdir"; then
+ kde_servicesdir='\${prefix}/share/services'
+ fi
+ if test -z "$kde_servicetypesdir"; then
+ kde_servicetypesdir='\${prefix}/share/servicetypes'
+ fi
+ if test -z "$kde_moduledir"; then
+ kde_moduledir='\${prefix}/lib/kde2'
+ fi
+
+ KDE_SET_PATHS(defaults)
+
+else
+
+ if test $kde_qtver = 1; then
+ AC_MSG_RESULT([compiling])
+ KDE_1_CHECK_PATHS
+ else
+ AC_MSG_ERROR([path checking not yet supported for KDE 2])
+ fi
+
+fi
+])
+
+AC_DEFUN(KDE_CHECK_PATHS_FOR_COMPLETENESS,
+[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" ||
+ test -z "$kde_icondir" || test -z "$kde_sounddir" ||
+ test -z "$kde_datadir" || test -z "$kde_locale" ||
+ test -z "$kde_cgidir" || test -z "$kde_confdir" ||
+ test -z "$kde_mimedir" || test -z "$kde_toolbardir" ||
+ test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" ||
+ test -z "$kde_bindir" || test -z "$kde_servicesdir" ||
+ test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" ||
+ test "$kde_have_all_paths" != "yes"; then
+ kde_have_all_paths=no
+ fi
+])
+
+AC_DEFUN(KDE_MISSING_PROG_ERROR,
+[
+ AC_MSG_ERROR([The important program $1 was not found!
+Please check whether you installed KDE correctly.
+])
+])
+
+AC_DEFUN(KDE_SUBST_PROGRAMS,
+[AC_REQUIRE([AC_CREATE_KFSSTND])dnl
+
+ kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde2/bin /usr/kde/bin /usr/local/kde/bin"
+ if test -n "$KDEDIRS"; then
+ kde_save_IFS=$IFS
+ IFS=:
+ for dir in $KDEDIRS; do
+ kde_default_bindirs="$dir/bin $kde_default_bindirs "
+ done
+ IFS=$kde_save_IFS
+ fi
+ kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs"
+ KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)])
+ KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)])
+ KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(mcopidl)])
+ KDE_FIND_PATH(kdb2html, KDB2HTML, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kdb2html)])
+ KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(artsc-config)])
+ KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)])
+
+ DCOP_DEPENDENCIES='$(DCOPIDL)'
+ AC_SUBST(DCOPIDL)
+ AC_SUBST(DCOPIDL2CPP)
+ AC_SUBST(DCOP_DEPENDENCIES)
+ AC_SUBST(MCOPIDL)
+ AC_SUBST(KDB2HTML)
+ AC_SUBST(ARTSCCONFIG)
+ AC_SUBST(KDECONFIG)
+
+ if test -x "$KDECONFIG"; then # it can be "compiled"
+ kde_libs_prefix=`$KDECONFIG --prefix`
+ if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then
+ AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs.
+ This means it has been moved since you installed it.
+ This won't work. Please recompile kdelibs for the new prefix.
+ ])
+ fi
+ kde_libs_htmldir=`$KDECONFIG --install html --expandvars`
+ else
+ kde_libs_prefix='$(prefix)'
+ kde_libs_htmldir='$(kde_htmldir)'
+ fi
+ AC_SUBST(kde_libs_prefix)
+ AC_SUBST(kde_libs_htmldir)
+])dnl
+
+AC_DEFUN(AC_CREATE_KFSSTND,
+[
+AC_REQUIRE([AC_CHECK_RPATH])
+
+AC_MSG_CHECKING([for KDE paths])
+kde_result=""
+kde_cached_paths=yes
+AC_CACHE_VAL(kde_cv_all_paths,
+[
+ KDE_SET_DEFAULT_PATHS($1)
+ kde_cached_paths=no
+])
+eval "$kde_cv_all_paths"
+KDE_CHECK_PATHS_FOR_COMPLETENESS
+if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then
+ # wrong values were cached, may be, we can set better ones
+ kde_result=
+ kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir=
+ kde_datadir= kde_locale= kde_cgidir= kde_confdir=
+ kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir=
+ kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir=
+ kde_have_all_paths=
+ KDE_SET_DEFAULT_PATHS($1)
+ eval "$kde_cv_all_paths"
+ KDE_CHECK_PATHS_FOR_COMPLETENESS
+ kde_result="$kde_result (cache overridden)"
+fi
+if test "$kde_have_all_paths" = "no"; then
+ AC_MSG_ERROR([configure could not run a little KDE program to test the environment.
+Since it had compiled and linked before, it must be a strange problem on your system.
+Look at config.log for details. If you are not able to fix this, look at
+http://www.kde.org/faq/installation.html or any www.kde.org mirror.
+(If you're using an egcs version on Linux, you may update binutils!)
+])
+else
+ rm -f conftest*
+ AC_MSG_RESULT($kde_result)
+fi
+
+bindir=$kde_bindir
+
+KDE_SUBST_PROGRAMS
+
+])
+
+AC_DEFUN(AC_SUBST_KFSSTND,
+[
+AC_SUBST(kde_htmldir)
+AC_SUBST(kde_appsdir)
+AC_SUBST(kde_icondir)
+AC_SUBST(kde_sounddir)
+AC_SUBST(kde_datadir)
+AC_SUBST(kde_locale)
+AC_SUBST(kde_confdir)
+AC_SUBST(kde_mimedir)
+AC_SUBST(kde_wallpaperdir)
+AC_SUBST(kde_bindir)
+dnl for KDE 2
+AC_SUBST(kde_templatesdir)
+AC_SUBST(kde_servicesdir)
+AC_SUBST(kde_servicetypesdir)
+AC_SUBST(kde_moduledir)
+if test "$kde_qtver" = 1; then
+ kde_minidir="$kde_icondir/mini"
+else
+# for KDE 1 - this breaks KDE2 apps using minidir, but
+# that's the plan ;-/
+ kde_minidir="/dev/null"
+fi
+dnl AC_SUBST(kde_minidir)
+dnl AC_SUBST(kde_cgidir)
+dnl AC_SUBST(kde_toolbardir)
+])
+
+AC_DEFUN(KDE_MISC_TESTS,
+[
+ AC_LANG_C
+ dnl Checks for libraries.
+ AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for FreeBSD
+ AC_SUBST(LIBCOMPAT)
+ kde_have_crypt=
+ AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes],
+ AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [
+ AC_MSG_WARN([you have no crypt in either libcrypt or libc.
+You should install libcrypt from another source or configure with PAM
+support])
+ kde_have_crypt=no
+ ]))
+ AC_SUBST(LIBCRYPT)
+ if test $kde_have_crypt = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function])
+ fi
+ AC_CHECK_KSIZE_T
+ AC_LANG_C
+ AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"])
+ if test $ac_cv_lib_dnet_dnet_ntoa = no; then
+ AC_CHECK_LIB(dnet_stub, dnet_ntoa,
+ [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"])
+ fi
+ AC_CHECK_FUNC(inet_ntoa)
+ if test $ac_cv_func_inet_ntoa = no; then
+ AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl")
+ fi
+ AC_CHECK_FUNC(connect)
+ if test $ac_cv_func_connect = no; then
+ AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", ,
+ $X_EXTRA_LIBS)
+ fi
+
+ AC_CHECK_FUNC(remove)
+ if test $ac_cv_func_remove = no; then
+ AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix")
+ fi
+
+ # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
+ AC_CHECK_FUNC(shmat, ,
+ AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"))
+
+ # Solaris 2.6 needs -lresolv for res_init
+ AC_CHECK_FUNC(res_init, ,
+ AC_CHECK_LIB(resolv, res_init, X_EXTRA_LIBS="$X_EXTRA_LIBS -lresolv"))
+
+ LIBSOCKET="$X_EXTRA_LIBS"
+ AC_SUBST(LIBSOCKET)
+ AC_SUBST(X_EXTRA_LIBS)
+ AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4
+ AC_SUBST(LIBUCB)
+
+ case $host in dnl this *is* LynxOS specific
+ *-*-lynxos* )
+ AC_MSG_CHECKING([LynxOS header file wrappers])
+ [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"]
+ AC_MSG_RESULT(disabled)
+ AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS
+ ;;
+ esac
+
+ KDE_CHECK_TYPES
+ KDE_CHECK_LIBDL
+])
+
+dnl ------------------------------------------------------------------------
+dnl Find the header files and libraries for X-Windows. Extended the
+dnl macro AC_PATH_X
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(K_PATH_X,
+[
+AC_REQUIRE([AC_PROG_CPP])dnl
+AC_REQUIRE([KDE_MISC_TESTS])dnl
+AC_MSG_CHECKING(for X)
+AC_LANG_SAVE
+AC_LANG_C
+AC_CACHE_VAL(kde_cv_have_x,
+[# One or both of the vars are not set, and there is no cached value.
+if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then
+ kde_x_includes=NO
+else
+ kde_x_includes=$x_includes
+fi
+if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then
+ kde_x_libraries=NO
+else
+ kde_x_libraries=$x_libraries
+fi
+
+# below we use the standard autoconf calls
+ac_x_libraries=$kde_x_libraries
+ac_x_includes=$kde_x_includes
+
+AC_PATH_X_DIRECT
+dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries.
+dnl Unfortunately, if compiling with the N32 ABI, this is not the correct
+dnl location. The correct location is /usr/lib32 or an undefined value
+dnl (the linker is smart enough to pick the correct default library).
+dnl Things work just fine if you use just AC_PATH_X_DIRECT.
+case "$host" in
+mips-sgi-irix6*)
+ ;;
+*)
+ AC_PATH_X_XMKMF
+ if test -z "$ac_x_includes"; then
+ ac_x_includes="."
+ fi
+ if test -z "$ac_x_libraries"; then
+ ac_x_libraries="/usr/lib"
+ fi
+esac
+#from now on we use our own again
+
+# when the user already gave --x-includes, we ignore
+# what the standard autoconf macros told us.
+if test "$kde_x_includes" = NO; then
+ kde_x_includes=$ac_x_includes
+fi
+
+# for --x-libraries too
+if test "$kde_x_libraries" = NO; then
+ kde_x_libraries=$ac_x_libraries
+fi
+
+if test "$kde_x_includes" = NO; then
+ AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!])
+fi
+
+if test "$kde_x_libraries" = NO; then
+ AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!])
+fi
+
+# Record where we found X for the cache.
+kde_cv_have_x="have_x=yes \
+ kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries"
+])dnl
+eval "$kde_cv_have_x"
+
+if test "$have_x" != yes; then
+ AC_MSG_RESULT($have_x)
+ no_x=yes
+else
+ AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes])
+fi
+
+if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then
+ X_INCLUDES=""
+ x_includes="."; dnl better than nothing :-
+ else
+ x_includes=$kde_x_includes
+ X_INCLUDES="-I$x_includes"
+fi
+
+if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then
+ X_LDFLAGS=""
+ x_libraries="/usr/lib"; dnl better than nothing :-
+ else
+ x_libraries=$kde_x_libraries
+ X_LDFLAGS="-L$x_libraries"
+fi
+all_includes="$X_INCLUDES"
+all_libraries="$X_LDFLAGS"
+
+AC_SUBST(X_INCLUDES)
+AC_SUBST(X_LDFLAGS)
+AC_SUBST(x_libraries)
+AC_SUBST(x_includes)
+
+# Check for libraries that X11R6 Xt/Xaw programs need.
+ac_save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS $X_LDFLAGS"
+# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
+# check for ICE first), but we must link in the order -lSM -lICE or
+# we get undefined symbols. So assume we have SM if we have ICE.
+# These have to be linked with before -lX11, unlike the other
+# libraries we check for below, so use a different variable.
+# --interran at uluru.Stanford.EDU, kb at cs.umb.edu.
+AC_CHECK_LIB(ICE, IceConnectionNumber,
+ [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS)
+AC_SUBST(LIBSM)
+LDFLAGS="$ac_save_LDFLAGS"
+
+AC_SUBST(X_PRE_LIBS)
+
+LIB_X11='-lX11 $(LIBSOCKET)'
+AC_SUBST(LIB_X11)
+
+AC_MSG_CHECKING(for libXext)
+AC_CACHE_VAL(kde_cv_have_libXext,
+[
+kde_ldflags_safe="$LDFLAGS"
+kde_libs_safe="$LIBS"
+
+LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS"
+LIBS="-lXext -lX11 $LIBSOCKET"
+
+AC_TRY_LINK([
+#include <stdio.h>
+],
+[
+printf("hello Xext\n");
+],
+kde_cv_have_libXext=yes,
+kde_cv_have_libXext=no
+ )
+
+LDFLAGS=$kde_ldflags_safe
+LIBS=$kde_libs_safe
+ ])
+
+AC_MSG_RESULT($kde_cv_have_libXext)
+
+if test "$kde_cv_have_libXext" = "no"; then
+ AC_MSG_ERROR([We need a working libXext to proceed. Since configure
+can't find it itself, we stop here assuming that make wouldn't find
+them either.])
+fi
+
+])
+
+AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_PRINT_QT_PROGRAM,
+[
+AC_REQUIRE([KDE_USE_QT])
+cat > conftest.$ac_ext <<EOF
+#include "confdefs.h"
+#include <qglobal.h>
+#include <qapplication.h>
+#include <qapp.h>
+#include <qobjcoll.h>
+EOF
+if test "$kde_qtver" = "2"; then
+cat >> conftest.$ac_ext <<EOF
+#include <qevent.h>
+#include <qstring.h>
+#include <qstyle.h>
+EOF
+
+if test $kde_qtsubver -gt 0; then
+cat >> conftest.$ac_ext <<EOF
+#include <qiconview.h>
+EOF
+fi
+
+fi
+
+echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
+cat >> conftest.$ac_ext <<EOF
+#error 1
+#endif
+
+int main() {
+EOF
+if test "$kde_qtver" = "2"; then
+cat >> conftest.$ac_ext <<EOF
+ QStringList *t = new QStringList();
+EOF
+if test $kde_qtsubver -gt 0; then
+cat >> conftest.$ac_ext <<EOF
+ QIconView iv(0);
+ iv.setWordWrapIconText(false);
+ QString s;
+ s.setLatin1("Elvis is alive", 14);
+ int magnolia = QEvent::Speech; /* new in 2.2 beta2 */
+EOF
+fi
+fi
+cat >> conftest.$ac_ext <<EOF
+ return 0;
+}
+EOF
+])
+
+AC_DEFUN(KDE_USE_QT,
+[
+
+if test -z "$1"; then
+ kde_qtver=2
+ kde_qtsubver=1
+else
+ kde_qtsubver=`echo "$1" | sed -e 's#[0-9]\+\.\([0-9]\+\).*#\1#'`
+ # following is the check if subversion isn´t found in passed argument
+ if test "$kde_qtsubver" = "$1"; then
+ kde_qtsubver=1
+ fi
+ kde_qtver=`echo "$1" | sed -e 's#^\([0-9]\+\)\..*#\1#'`
+ if test "$kde_qtver" = "1"; then
+ kde_qtsubver=42
+ else
+ # this is the version number fallback to 2.1, unless major version is 1 or 2
+ if test "$kde_qtver" != "2"; then
+ kde_qtver=2
+ kde_qtsubver=1
+ fi
+ fi
+fi
+
+if test -z "$2"; then
+ if test $kde_qtver = 2; then
+ if test $kde_qtsubver -gt 0; then
+ kde_qt_minversion=">= Qt 2.2.2"
+ else
+ kde_qt_minversion=">= Qt 2.0.2"
+ fi
+ else
+ kde_qt_minversion=">= 1.42 and < 2.0"
+ fi
+else
+ kde_qt_minversion=$2
+fi
+
+if test -z "$3"; then
+ if test $kde_qtver = 2; then
+ if test $kde_qtsubver -gt 0; then
+ kde_qt_verstring="QT_VERSION >= 222"
+ else
+ kde_qt_verstring="QT_VERSION >= 200"
+ fi
+ else
+ kde_qt_verstring="QT_VERSION >= 142 && QT_VERSION < 200"
+ fi
+else
+ kde_qt_verstring=$3
+fi
+
+if test $kde_qtver = 2; then
+ kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt"
+else
+ kde_qt_dirs="$QTDIR /usr/lib/qt"
+fi
+])
+
+AC_DEFUN(KDE_CHECK_QT_DIRECT,
+[
+AC_REQUIRE([KDE_USE_QT])
+AC_MSG_CHECKING([if Qt compiles without flags])
+AC_CACHE_VAL(kde_cv_qt_direct,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH
+ac_LIBRARY_PATH="$LIBRARY_PATH"
+ac_cxxflags_safe="$CXXFLAGS"
+ac_ldflags_safe="$LDFLAGS"
+ac_libs_safe="$LIBS"
+
+CXXFLAGS="$CXXFLAGS -I$qt_includes"
+LDFLAGS="$LDFLAGS $X_LDFLAGS"
+LIBS="$LIBQT -lXext -lX11 $LIBSOCKET"
+LD_LIBRARY_PATH=
+export LD_LIBRARY_PATH
+LIBRARY_PATH=
+export LIBRARY_PATH
+
+KDE_PRINT_QT_PROGRAM
+
+if AC_TRY_EVAL(ac_link) && test -s conftest; then
+ kde_cv_qt_direct="yes"
+else
+ kde_cv_qt_direct="no"
+ echo "configure: failed program was:" >&AC_FD_CC
+ cat conftest.$ac_ext >&AC_FD_CC
+fi
+
+rm -f conftest*
+CXXFLAGS="$ac_cxxflags_safe"
+LDFLAGS="$ac_ldflags_safe"
+LIBS="$ac_libs_safe"
+
+LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe"
+export LD_LIBRARY_PATH
+LIBRARY_PATH="$ac_LIBRARY_PATH"
+export LIBRARY_PATH
+AC_LANG_RESTORE
+])
+
+if test "$kde_cv_qt_direct" = "yes"; then
+ AC_MSG_RESULT(yes)
+ $1
+else
+ AC_MSG_RESULT(no)
+ $2
+fi
+])
+
+dnl ------------------------------------------------------------------------
+dnl Try to find the Qt headers and libraries.
+dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed)
+dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed)
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_PATH_QT_1_3,
+[
+AC_REQUIRE([K_PATH_X])
+AC_REQUIRE([KDE_USE_QT])
+
+dnl ------------------------------------------------------------------------
+dnl Add configure flag to enable linking to MT version of Qt library.
+dnl ------------------------------------------------------------------------
+
+AC_ARG_ENABLE(
+ mt,
+ [ --enable-mt link to threaded Qt (experimental)],
+ kde_use_qt_mt=$enableval,
+ kde_use_qt_mt=no
+)
+
+USING_QT_MT=""
+
+dnl ------------------------------------------------------------------------
+dnl If we got --enable-qt-mt then adjust some vars for the host.
+dnl ------------------------------------------------------------------------
+
+if test "x$kde_use_qt_mt" = "xyes"; then
+
+ case $host in
+ *-*-linux-*)
+ if test "x$GCC" = "xyes"; then
+ CPPFLAGS="$CPPFLAGS -DQT_THREAD_SUPPORT -pthread"
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -pthread"
+ else
+ AC_MSG_WARN([Compiler is not gcc. MT support disabled.])
+ fi
+ ;;
+ *)
+ AC_MSG_WARN([MT not yet supported on $host - disabled.])
+ ;;
+ esac
+
+fi
+
+kde_qt_was_given=yes
+
+dnl ------------------------------------------------------------------------
+dnl If we haven't been told how to link to Qt, we work it out for ourselves.
+dnl ------------------------------------------------------------------------
+
+if test -z "$LIBQT_GLOB"; then
+
+ LIBQT_GLOB="libqt.*"
+
+fi
+
+if test -z "$LIBQT"; then
+
+ LIBQT="-lqt"
+ kde_int_qt="-lqt"
+
+dnl ------------------------------------------------------------------------
+dnl If we got --enable-qt-mt then adjust the Qt library name for the host.
+dnl ------------------------------------------------------------------------
+
+ if test "x$kde_use_qt_mt" = "xyes"; then
+
+ case $host in
+ *-*-linux-*)
+ if test "x$GCC" = "xyes"; then
+ LIBQT="-lqt-mt"
+ kde_int_qt="-lqt-mt"
+ LIBQT_GLOB="libqt-mt.*"
+ USING_QT_MT="using -mt"
+ fi
+ ;;
+ esac
+ fi
+
+ kde_qt_was_given=no
+
+else
+ kde_int_qt="$LIBQT"
+fi
+
+if test $kde_qtver = 2; then
+
+ AC_REQUIRE([AC_FIND_PNG])
+ AC_REQUIRE([AC_FIND_JPEG])
+ LIBQT="$LIBQT $LIBPNG $LIBJPEG"
+fi
+
+AC_MSG_CHECKING([for Qt])
+
+LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET"
+ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO
+qt_libraries=""
+qt_includes=""
+AC_ARG_WITH(qt-dir,
+ [ --with-qt-dir=DIR where the root of Qt is installed ],
+ [ ac_qt_includes="$withval"/include
+ ac_qt_libraries="$withval"/lib
+ ac_qt_bindir="$withval"/bin
+ ])
+
+AC_ARG_WITH(qt-includes,
+ [ --with-qt-includes=DIR where the Qt includes are. ],
+ [
+ ac_qt_includes="$withval"
+ ])
+
+kde_qt_libs_given=no
+
+AC_ARG_WITH(qt-libraries,
+ [ --with-qt-libraries=DIR where the Qt library is installed.],
+ [ ac_qt_libraries="$withval"
+ kde_qt_libs_given=yes
+ ])
+
+AC_CACHE_VAL(ac_cv_have_qt,
+[#try to guess Qt locations
+
+qt_incdirs=""
+for dir in $kde_qt_dirs; do
+ qt_incdirs="$qt_incdirs $dir/include $dir"
+done
+qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt $x_includes"
+if test ! "$ac_qt_includes" = "NO"; then
+ qt_incdirs="$ac_qt_includes $qt_incdirs"
+fi
+
+if test "$kde_qtver" = "2"; then
+ kde_qt_header=qstyle.h
+else
+ kde_qt_header=qglobal.h
+fi
+
+AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir)
+ac_qt_includes="$qt_incdir"
+
+qt_libdirs=""
+for dir in $kde_qt_dirs; do
+ qt_libdirs="$qt_libdirs $dir/lib $dir"
+done
+qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries"
+if test ! "$ac_qt_libraries" = "NO"; then
+ qt_libdir=$ac_qt_libraries
+else
+ qt_libdirs="$ac_qt_libraries $qt_libdirs"
+ # if the Qt was given, the chance is too big that libqt.* doesn't exist
+ qt_libdir=NONE
+ for dir in $qt_libdirs; do
+ try="ls -1 $dir/${LIBQT_GLOB}"
+ if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi
+ done
+fi
+
+ac_qt_libraries="$qt_libdir"
+
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+
+ac_cxxflags_safe="$CXXFLAGS"
+ac_ldflags_safe="$LDFLAGS"
+ac_libs_safe="$LIBS"
+
+CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
+LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS"
+LIBS="$LIBS $LIBQT"
+
+KDE_PRINT_QT_PROGRAM
+
+if AC_TRY_EVAL(ac_link) && test -s conftest; then
+ rm -f conftest*
+else
+ echo "configure: failed program was:" >&AC_FD_CC
+ cat conftest.$ac_ext >&AC_FD_CC
+ ac_qt_libraries="NO"
+fi
+rm -f conftest*
+CXXFLAGS="$ac_cxxflags_safe"
+LDFLAGS="$ac_ldflags_safe"
+LIBS="$ac_libs_safe"
+
+AC_LANG_RESTORE
+if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then
+ ac_cv_have_qt="have_qt=no"
+ ac_qt_notfound=""
+ if test "$ac_qt_includes" = NO; then
+ if test "$ac_qt_libraries" = NO; then
+ ac_qt_notfound="(headers and libraries)";
+ else
+ ac_qt_notfound="(headers)";
+ fi
+ else
+ ac_qt_notfound="(libraries)";
+ fi
+
+ AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation!
+For more details about this problem, look at the end of config.log.])
+else
+ have_qt="yes"
+fi
+])
+
+eval "$ac_cv_have_qt"
+
+if test "$have_qt" != yes; then
+ AC_MSG_RESULT([$have_qt]);
+else
+ ac_cv_have_qt="have_qt=yes \
+ ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries"
+ AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT])
+
+ qt_libraries="$ac_qt_libraries"
+ qt_includes="$ac_qt_includes"
+fi
+
+if test ! "$kde_qt_libs_given" = "yes"; then
+KDE_CHECK_QT_DIRECT(qt_libraries= ,[])
+fi
+
+AC_SUBST(qt_libraries)
+AC_SUBST(qt_includes)
+
+if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then
+ QT_INCLUDES="";
+else
+ QT_INCLUDES="-I$qt_includes"
+ all_includes="$QT_INCLUDES $all_includes"
+fi
+
+if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then
+ QT_LDFLAGS=""
+else
+ QT_LDFLAGS="-L$qt_libraries"
+ all_libraries="$all_libraries $QT_LDFLAGS"
+fi
+
+AC_SUBST(QT_INCLUDES)
+AC_SUBST(QT_LDFLAGS)
+AC_PATH_QT_MOC_UIC
+
+LIB_QT="$kde_int_qt "'$(LIBPNG) $(LIBJPEG) -lXext $(LIB_X11) $(LIBSM)'
+AC_SUBST(LIB_QT)
+
+])
+
+AC_DEFUN(AC_PATH_QT,
+[
+AC_PATH_QT_1_3
+])
+
+AC_DEFUN(KDE_CHECK_FINAL,
+[
+ AC_ARG_ENABLE(final, [ --enable-final build size optimized apps (experimental - needs lots of memory)],
+ kde_use_final=$enableval, kde_use_final=no)
+
+ KDE_COMPILER_REPO
+ if test "x$kde_use_final" = "xyes"; then
+ KDE_USE_FINAL_TRUE=""
+ KDE_USE_FINAL_FALSE="#"
+ else
+ KDE_USE_FINAL_TRUE="#"
+ KDE_USE_FINAL_FALSE=""
+ fi
+ AC_SUBST(KDE_USE_FINAL_TRUE)
+ AC_SUBST(KDE_USE_FINAL_FALSE)
+
+ AC_ARG_ENABLE(closure, [ --disable-closure don't delay template instantiation],
+ kde_use_closure=$enableval, kde_use_closure=yes)
+
+ if test "x$kde_use_closure" = "xyes"; then
+ KDE_USE_CLOSURE_TRUE=""
+ KDE_USE_CLOSURE_FALSE="#"
+# CXXFLAGS="$CXXFLAGS $REPO"
+ else
+ KDE_USE_CLOSURE_TRUE="#"
+ KDE_USE_CLOSURE_FALSE=""
+ fi
+ AC_SUBST(KDE_USE_CLOSURE_TRUE)
+ AC_SUBST(KDE_USE_CLOSURE_FALSE)
+])
+
+dnl ------------------------------------------------------------------------
+dnl Now, the same with KDE
+dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed)
+dnl and $(kde_includes) will be the kdehdrlocation (if needed)
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_BASE_PATH_KDE,
+[
+AC_PREREQ([2.13])
+AC_REQUIRE([AC_PATH_QT])dnl
+AC_CHECK_RPATH
+AC_MSG_CHECKING([for KDE])
+
+if test "${prefix}" != NONE; then
+ kde_includes=${prefix}/include
+ ac_kde_includes=$prefix/include
+
+ if test "${exec_prefix}" != NONE; then
+ kde_libraries=${exec_prefix}/lib
+ ac_kde_libraries=$exec_prefix/lib
+ else
+ kde_libraries=${prefix}/lib
+ ac_kde_libraries=$prefix/lib
+ fi
+else
+ ac_kde_includes=
+ ac_kde_libraries=
+ kde_libraries=""
+ kde_includes=""
+fi
+
+AC_CACHE_VAL(ac_cv_have_kde,
+[#try to guess kde locations
+
+if test "$kde_qtver" = 1; then
+ kde_check_header="ksock.h"
+ kde_check_lib="libkdecore.la"
+else
+ kde_check_header="ksharedptr.h"
+ kde_check_lib="libkio.la"
+fi
+
+if test -z "$1"; then
+
+kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/kde/include /usr/include/kde /usr/include /opt/kde2/include /opt/kde/include $x_includes $qt_includes"
+test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs"
+kde_incdirs="$ac_kde_includes $kde_incdirs"
+AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir)
+ac_kde_includes="$kde_incdir"
+
+if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then
+ AC_MSG_ERROR([
+in the prefix, you've chosen, are no KDE headers installed. This will fail.
+So, check this please and use another prefix!])
+fi
+
+kde_libdirs="/usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib /usr/X11R6/lib /opt/kde2/lib /opt/kde/lib /usr/X11R6/kde/lib"
+test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib $KDEDIR $kde_libdirs"
+kde_libdirs="$ac_kde_libraries $kde_libdirs"
+AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir)
+ac_kde_libraries="$kde_libdir"
+
+if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then
+AC_MSG_ERROR([
+in the prefix, you've chosen, are no KDE libraries installed. This will fail.
+So, check this please and use another prefix!])
+fi
+ac_kde_libraries="$kde_libdir"
+
+if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO; then
+ ac_cv_have_kde="have_kde=no"
+else
+ ac_cv_have_kde="have_kde=yes \
+ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
+fi
+
+else dnl test -z $1
+
+ ac_cv_have_kde="have_kde=no"
+
+fi
+])dnl
+
+eval "$ac_cv_have_kde"
+
+if test "$have_kde" != "yes"; then
+ if test "${prefix}" = NONE; then
+ ac_kde_prefix="$ac_default_prefix"
+ else
+ ac_kde_prefix="$prefix"
+ fi
+ if test "$exec_prefix" = NONE; then
+ ac_kde_exec_prefix="$ac_kde_prefix"
+ AC_MSG_RESULT([will be installed in $ac_kde_prefix])
+ else
+ ac_kde_exec_prefix="$exec_prefix"
+ AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix])
+ fi
+
+ kde_libraries="${ac_kde_exec_prefix}/lib"
+ kde_includes=${ac_kde_prefix}/include
+
+else
+ ac_cv_have_kde="have_kde=yes \
+ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
+ AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes])
+
+ kde_libraries="$ac_kde_libraries"
+ kde_includes="$ac_kde_includes"
+fi
+AC_SUBST(kde_libraries)
+AC_SUBST(kde_includes)
+
+if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" ; then
+ KDE_INCLUDES=""
+else
+ KDE_INCLUDES="-I$kde_includes"
+ all_includes="$KDE_INCLUDES $all_includes"
+fi
+
+KDE_LDFLAGS="-L$kde_libraries"
+if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then
+ all_libraries="$all_libraries $KDE_LDFLAGS"
+fi
+
+AC_SUBST(KDE_LDFLAGS)
+AC_SUBST(KDE_INCLUDES)
+
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+all_libraries="$all_libraries $USER_LDFLAGS"
+all_includes="$all_includes $USER_INCLUDES"
+AC_SUBST(all_includes)
+AC_SUBST(all_libraries)
+
+AC_SUBST(AUTODIRS)
+])
+
+AC_DEFUN(KDE_CHECK_EXTRA_LIBS,
+[
+AC_MSG_CHECKING(for extra includes)
+AC_ARG_WITH(extra-includes, [ --with-extra-includes=DIR
+ adds non standard include paths],
+ kde_use_extra_includes="$withval",
+ kde_use_extra_includes=NONE
+)
+kde_extra_includes=
+if test -n "$kde_use_extra_includes" && \
+ test "$kde_use_extra_includes" != "NONE"; then
+
+ ac_save_ifs=$IFS
+ IFS=':'
+ for dir in $kde_use_extra_includes; do
+ kde_extra_includes="$kde_extra_includes $dir"
+ USER_INCLUDES="$USER_INCLUDES -I$dir"
+ done
+ IFS=$ac_save_ifs
+ kde_use_extra_includes="added"
+else
+ kde_use_extra_includes="no"
+fi
+AC_SUBST(USER_INCLUDES)
+
+AC_MSG_RESULT($kde_use_extra_includes)
+
+kde_extra_libs=
+AC_MSG_CHECKING(for extra libs)
+AC_ARG_WITH(extra-libs, [ --with-extra-libs=DIR adds non standard library paths],
+ kde_use_extra_libs=$withval,
+ kde_use_extra_libs=NONE
+)
+if test -n "$kde_use_extra_libs" && \
+ test "$kde_use_extra_libs" != "NONE"; then
+
+ ac_save_ifs=$IFS
+ IFS=':'
+ for dir in $kde_use_extra_libs; do
+ kde_extra_libs="$kde_extra_libs $dir"
+ KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir"
+ USER_LDFLAGS="$USER_LDFLAGS -L$dir"
+ done
+ IFS=$ac_save_ifs
+ kde_use_extra_libs="added"
+else
+ kde_use_extra_libs="no"
+fi
+
+AC_SUBST(USER_LDFLAGS)
+
+AC_MSG_RESULT($kde_use_extra_libs)
+
+])
+
+AC_DEFUN(KDE_1_CHECK_PATH_HEADERS,
+[
+ AC_MSG_CHECKING([for KDE headers installed])
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+cat > conftest.$ac_ext <<EOF
+#include <stdio.h>
+#include "confdefs.h"
+#include <kapp.h>
+
+int main() {
+ printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data());
+ printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data());
+ printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data());
+ printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data());
+ printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data());
+ printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data());
+ printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data());
+ printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data());
+ printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data());
+ printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data());
+ printf("kde_wallpaperdir=\\"%s\\"\n",
+ KApplication::kde_wallpaperdir().data());
+ printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data());
+ printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data());
+ printf("kde_servicesdir=\\"/tmp/dummy\\"\n");
+ printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n");
+ printf("kde_moduledir=\\"/tmp/dummy\\"\n");
+ return 0;
+ }
+EOF
+
+ ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext'
+ if AC_TRY_EVAL(ac_compile); then
+ AC_MSG_RESULT(yes)
+ else
+ AC_MSG_ERROR([your system is not able to compile a small KDE application!
+Check, if you installed the KDE header files correctly.
+For more details about this problem, look at the end of config.log.])
+ fi
+
+ AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_CHECK_KDEQTADDON,
+[
+AC_MSG_CHECKING(for kde-qt-addon)
+AC_CACHE_VAL(kde_cv_have_kdeqtaddon,
+[
+ kde_ldflags_safe="$LDFLAGS"
+ kde_libs_safe="$LIBS"
+ kde_cxxflags_safe="$CXXFLAGS"
+
+ LIBS="-lkde-qt-addon $LIBQT $LIBS"
+ CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes"
+ LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS"
+
+ AC_TRY_LINK([
+ #include <qdom.h>
+ ],
+ [
+ QDomDocument doc;
+ ],
+ kde_cv_have_kdeqtaddon=yes,
+ kde_cv_have_kdeqtaddon=no
+ )
+
+ LDFLAGS=$kde_ldflags_safe
+ LIBS=$kde_libs_safe
+ kde_cxxflags_safe="$CXXFLAGS"
+])
+
+AC_MSG_RESULT($kde_cv_have_kdeqtaddon)
+
+if test "$kde_cv_have_kdeqtaddon" = "no"; then
+ AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first.
+It is a separate package (and CVS module) named kde-qt-addon.])
+fi
+])
+
+AC_DEFUN(KDE_CHECK_KIMGIO,
+[
+ AC_REQUIRE([AC_BASE_PATH_KDE])
+ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+ AC_REQUIRE([AC_FIND_TIFF])
+ AC_REQUIRE([AC_FIND_JPEG])
+ AC_REQUIRE([AC_FIND_PNG])
+ AC_REQUIRE([KDE_CREATE_LIBS_ALIASES])
+
+ if test "$1" = "existance"; then
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ kde_save_LIBS="$LIBS"
+ LIBS="$LIBS $all_libraries $LIBJPEG $LIBTIFF $LIBPNG $LIBQT -lm"
+ AC_CHECK_LIB(kimgio, kimgioRegister, [
+ LIBKIMGIO_EXISTS=yes],LIBKIMGIO_EXISTS=no)
+ LIBS="$kde_save_LIBS"
+ AC_LANG_RESTORE
+ else
+ LIBKIMGIO_EXISTS=yes
+ fi
+
+ if test "$LIBKIMGIO_EXISTS" = "yes"; then
+ LIB_KIMGIO='-lkimgio'
+ else
+ LIB_KIMGIO=''
+ fi
+ AC_SUBST(LIB_KIMGIO)
+])
+
+AC_DEFUN(KDE_CREATE_LIBS_ALIASES,
+[
+ AC_REQUIRE([KDE_MISC_TESTS])
+ AC_REQUIRE([KDE_CHECK_LIBDL])
+ AC_REQUIRE([K_PATH_X])
+
+if test $kde_qtver = 2; then
+ LIB_KDECORE='-lkdecore'
+ AC_SUBST(LIB_KDECORE)
+ LIB_KDEUI='-lkdeui'
+ AC_SUBST(LIB_KDEUI)
+ LIB_KFORMULA='-lkformula'
+ AC_SUBST(LIB_KFORMULA)
+ LIB_KIO='-lkio'
+ AC_SUBST(LIB_KIO)
+ LIB_KSYCOCA='-lksycoca'
+ AC_SUBST(LIB_KSYCOCA)
+ LIB_SMB='-lsmb'
+ AC_SUBST(LIB_SMB)
+ LIB_KFILE='-lkfile'
+ AC_SUBST(LIB_KFILE)
+ LIB_KAB='-lkab'
+ AC_SUBST(LIB_KAB)
+ LIB_KHTML='-lkhtml'
+ AC_SUBST(LIB_KHTML)
+ LIB_KSPELL='-lkspell'
+ AC_SUBST(LIB_KSPELL)
+ LIB_KPARTS='-lkparts'
+ AC_SUBST(LIB_KPARTS)
+ LIB_KWRITE='-lkwrite'
+ AC_SUBST(LIB_KWRITE)
+else
+ LIB_KDECORE='-lkdecore -lXext $(LIB_QT)'
+ AC_SUBST(LIB_KDECORE)
+ LIB_KDEUI='-lkdeui $(LIB_KDECORE)'
+ AC_SUBST(LIB_KDEUI)
+ LIB_KFM='-lkfm $(LIB_KDECORE)'
+ AC_SUBST(LIB_KFM)
+ LIB_KFILE='-lkfile $(LIB_KFM) $(LIB_KDEUI)'
+ AC_SUBST(LIB_KFILE)
+ LIB_KAB='-lkab $(LIB_KIMGIO) $(LIB_KDECORE)'
+ AC_SUBST(LIB_KAB)
+fi
+])
+
+AC_DEFUN(AC_PATH_KDE,
+[
+ AC_BASE_PATH_KDE
+ AC_ARG_ENABLE(path-check, [ --disable-path-check don't try to find out, where to install],
+ [
+ if test "$enableval" = "no";
+ then ac_use_path_checking="default"
+ else ac_use_path_checking=""
+ fi
+ ],
+ [
+ if test "$kde_qtver" = 1;
+ then ac_use_path_checking=""
+ else ac_use_path_checking="default"
+ fi
+ ]
+ )
+
+ AC_CREATE_KFSSTND($ac_use_path_checking)
+
+ AC_SUBST_KFSSTND
+ KDE_CREATE_LIBS_ALIASES
+])
+
+dnl obsolete
+AC_DEFUN(AC_CHECK_SETENV,
+[
+ AC_OBSOLETE([$0], [; instead use AC_CHECK_FUNCS([setenv unsetenv])])dnl
+ AC_CHECK_FUNCS([setenv unsetenv])
+])
+
+AC_DEFUN(AC_CHECK_GETDOMAINNAME,
+[
+AC_MSG_CHECKING(for getdomainname)
+AC_CACHE_VAL(ac_cv_func_getdomainname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+save_CXXFLAGS="$CXXFLAGS"
+kde_safe_LIBS="$LIBS"
+LIBS="$LIBS $X_EXTRA_LIBS"
+if test "$GCC" = "yes"; then
+CXXFLAGS="$CXXFLAGS -pedantic-errors"
+fi
+AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <unistd.h>
+],
+[
+char buffer[200];
+getdomainname(buffer, 200);
+],
+ac_cv_func_getdomainname=yes,
+ac_cv_func_getdomainname=no)
+CXXFLAGS="$save_CXXFLAGS"
+LIBS=$kde_safe_LIBS
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_getdomainname)
+
+AC_MSG_CHECKING([if getdomainname needs custom prototype])
+AC_CACHE_VAL(ac_cv_proto_getdomainname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+if eval "test \"`echo $ac_cv_func_getdomainname`\" = yes"; then
+ ac_cv_proto_getdomainname=no
+else
+ kde_safe_libs=$LIBS
+ LIBS="$LIBS $X_EXTRA_LIBS"
+ AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+
+extern "C" int getdomainname (char *, int);
+],
+[
+char buffer[200];
+getdomainname(buffer, 200);
+],
+ ac_cv_func_getdomainname=yes
+ ac_cv_proto_getdomainname=yes,
+ AC_MSG_RESULT([fatal error])
+ AC_MSG_ERROR([getdomainname unavailable]))
+fi
+LIBS=$kde_safe_libs
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_proto_getdomainname)
+
+if eval "test \"`echo $ac_cv_func_getdomainname`\" = yes"; then
+ AC_DEFINE(HAVE_GETDOMAINNAME, 1, [Define if you have getdomainname])
+fi
+if eval "test \"`echo $ac_cv_proto_getdomainname`\" = no"; then
+ AC_DEFINE(HAVE_GETDOMAINNAME_PROTO, 1,
+ [Define if you have getdomainname prototype])
+fi
+
+])
+
+AC_DEFUN(AC_CHECK_GETHOSTNAME,
+[
+
+AC_MSG_CHECKING([for gethostname])
+AC_CACHE_VAL(ac_cv_func_gethostname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+save_CXXFLAGS="$CXXFLAGS"
+if test "$GCC" = "yes"; then
+CXXFLAGS="$CXXFLAGS -pedantic-errors"
+fi
+AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+],
+[
+char buffer[200];
+gethostname(buffer, 200);
+],
+ac_cv_func_gethostname=yes,
+ac_cv_func_gethostname=no)
+CXXFLAGS="$save_CXXFLAGS"
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_gethostname)
+
+AC_MSG_CHECKING([if gethostname needs custom prototype])
+AC_CACHE_VAL(ac_cv_proto_gethostname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+if eval "test \"`echo $ac_cv_func_gethostname`\" = yes"; then
+ ac_cv_proto_gethostname=no
+else
+ AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+
+extern "C" int gethostname (char *, int);
+],
+[
+char buffer[200];
+gethostname(buffer, 200);
+],
+ ac_cv_func_gethostname=yes
+ ac_cv_proto_gethostname=yes,
+ AC_MSG_RESULT([fatal error])
+ AC_MSG_ERROR(gethostname unavailable))
+fi
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_proto_gethostname)
+
+if eval "test \"`echo $ac_cv_proto_gethostname`\" = no"; then
+ AC_DEFINE(HAVE_GETHOSTNAME_PROTO, 1,
+ [Define if you have gethostname prototype])
+fi
+if eval "test \"`echo $ac_cv_func_gethostname`\" = yes"; then
+ AC_DEFINE(HAVE_GETHOSTNAME, 1, [Define if you have getdomainname])
+fi
+])
+
+AC_DEFUN(AC_CHECK_USLEEP,
+[
+AC_MSG_CHECKING([for usleep])
+AC_CACHE_VAL(ac_cv_func_usleep,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_libs_safe="$LIBS"
+LIBS="$LIBS $LIBUCB"
+AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+],
+[
+usleep(200);
+],
+ac_cv_func_usleep=yes,
+ac_cv_func_usleep=no)
+LIBS="$ac_libs_safe"
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_usleep)
+if eval "test \"`echo $ac_cv_func_usleep`\" = yes"; then
+ AC_DEFINE(HAVE_USLEEP, 1, [Define if you have the usleep function])
+fi
+])
+
+AC_DEFUN(AC_CHECK_RANDOM,
+[
+AC_MSG_CHECKING([for random])
+AC_CACHE_VAL(ac_cv_func_random,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_libs_safe="$LIBS"
+LIBS="$LIBS $LIBUCB"
+AC_TRY_LINK([
+#include <stdlib.h>
+],
+[
+random();
+],
+ac_cv_func_random=yes,
+ac_cv_func_random=no)
+LIBS="$ac_libs_safe"
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_random)
+if eval "test \"`echo $ac_cv_func_random`\" = yes"; then
+ AC_DEFINE(HAVE_RANDOM, 1, [Define if you have random])
+fi
+])
+
+AC_DEFUN(AC_FIND_GIF,
+ [AC_MSG_CHECKING([for giflib])
+AC_CACHE_VAL(ac_cv_lib_gif,
+[ac_save_LIBS="$LIBS"
+LIBS="$all_libraries -lgif -lX11 $LIBSOCKET"
+AC_TRY_LINK(dnl
+[
+#ifdef __cplusplus
+extern "C" {
+#endif
+int GifLastError(void);
+#ifdef __cplusplus
+}
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+],
+ [return GifLastError();],
+ eval "ac_cv_lib_gif=yes",
+ eval "ac_cv_lib_gif=no")
+LIBS="$ac_save_LIBS"
+])dnl
+if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then
+ AC_MSG_RESULT(yes)
+ AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif])
+else
+ AC_MSG_ERROR(You need giflib30. Please install the kdesupport package)
+fi
+])
+
+AC_DEFUN(KDE_FIND_JPEG_HELPER,
+[
+AC_MSG_CHECKING([for libjpeg$2])
+AC_CACHE_VAL(ac_cv_lib_jpeg_$1,
+[
+AC_LANG_C
+ac_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+AC_TRY_LINK(
+[/* Override any gcc2 internal prototype to avoid an error. */
+struct jpeg_decompress_struct;
+typedef struct jpeg_decompress_struct * j_decompress_ptr;
+typedef int size_t;
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void jpeg_CreateDecompress(j_decompress_ptr cinfo,
+ int version, size_t structsize);
+#ifdef __cplusplus
+}
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+],
+ [jpeg_CreateDecompress(0L, 0, 0);],
+ eval "ac_cv_lib_jpeg_$1=-ljpeg$2",
+ eval "ac_cv_lib_jpeg_$1=no")
+LIBS="$ac_save_LIBS"
+CFLAGS="$ac_save_CFLAGS"
+])
+
+if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then
+ LIBJPEG="$ac_cv_lib_jpeg_$1"
+ AC_MSG_RESULT($ac_cv_lib_jpeg_$1)
+else
+ AC_MSG_RESULT(no)
+ $3
+fi
+
+])
+
+AC_DEFUN(AC_FIND_JPEG,
+[
+dnl first look for libraries
+KDE_FIND_JPEG_HELPER(6b, 6b,
+ KDE_FIND_JPEG_HELPER(normal, [],
+ [
+dnl what to do, if the normal way fails:
+ if test -f "$kde_libraries/libjpeg.so"; then
+ test -f ./libjpegkde.so || $LN_S $kde_libraries/libjpeg.so ./libjpegkde.so
+ ac_cv_lib_jpeg="-L\${topdir} -ljpegkde"
+ else if test -f "$kde_libraries/libjpeg.sl"; then
+ test -f ./libjpegkde.sl ||$LN_S $kde_libraries/libjpeg.sl ./libjpegkde.sl
+ ac_cv_lib_jpeg="-L\${topdir} -ljpegkde"
+ else if test -f "$kde_libraries/libjpeg.a"; then
+ test -f ./libjpegkde.a || $LN_S $kde_libraries/libjpeg.a ./libjpegkde.a
+ ac_cv_lib_jpeg="-L\${topdir} -ljpegkde"
+ else
+ ac_cv_lib_jpeg=
+ fi
+ fi
+ fi
+
+ LIBJPEG=$ac_cv_lib_jpeg
+]))
+
+dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h
+dnl requires system dependent includes loaded before it)
+jpeg_incdirs="/usr/include /usr/local/include $kde_extra_includes"
+AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir)
+test "x$jpeg_incdir" = xNO && jpeg_incdir=
+
+dnl if headers _and_ libraries are missing, this is no error, and we
+dnl continue with a warning (the user will get no jpeg support in khtml)
+dnl if only one is missing, it means a configuration error, but we still
+dnl only warn
+if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then
+ AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg])
+else
+ if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then
+ AC_MSG_WARN([
+There is an installation error in jpeg support. You seem to have only one
+of either the headers _or_ the libraries installed. You may need to either
+provide correct --with-extra-... options, or the development package of
+libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
+Disabling JPEG support.
+])
+ else
+ AC_MSG_WARN([libjpeg not found. disable JPEG support.])
+ fi
+ jpeg_incdir=
+ LIBJPEG=
+fi
+
+AC_SUBST(LIBJPEG)
+])
+
+AC_DEFUN(AC_FIND_ZLIB,
+[
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+AC_MSG_CHECKING([for libz])
+AC_CACHE_VAL(ac_cv_lib_z,
+[
+AC_LANG_C
+kde_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET"
+kde_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+AC_TRY_LINK(dnl
+[
+#include<zlib.h>
+],
+ [return (zlibVersion() == ZLIB_VERSION); ],
+ eval "ac_cv_lib_z='-lz'",
+ eval "ac_cv_lib_z=no")
+LIBS="$kde_save_LIBS"
+CFLAGS="$kde_save_CFLAGS"
+])dnl
+if test ! "$ac_cv_lib_z" = no; then
+ AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz])
+ LIBZ="$ac_cv_lib_z"
+ AC_SUBST(LIBZ)
+ AC_MSG_RESULT($ac_cv_lib_z)
+else
+ AC_MSG_ERROR(not found. Check your installation and look into config.log)
+ LIBZ=""
+ AC_SUBST(LIBZ)
+fi
+])
+
+AC_DEFUN(KDE_TRY_TIFFLIB,
+[
+AC_MSG_CHECKING([for libtiff $1])
+
+AC_CACHE_VAL(kde_cv_libtiff_$1,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+kde_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm"
+kde_save_CXXFLAGS="$CXXFLAGS"
+CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES"
+
+AC_TRY_LINK(dnl
+[
+#include<tiffio.h>
+],
+ [return (TIFFOpen( "", "r") == 0); ],
+[
+ kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ"
+], [
+ kde_cv_libtiff_$1=no
+])
+
+LIBS="$kde_save_LIBS"
+CXXFLAGS="$kde_save_CXXFLAGS"
+AC_LANG_RESTORE
+])
+
+if test "$kde_cv_libtiff_$1" = "no"; then
+ AC_MSG_RESULT(no)
+ LIBTIFF=""
+ $3
+else
+ LIBTIFF="$kde_cv_libtiff_$1"
+ AC_MSG_RESULT(yes)
+ AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff])
+ $2
+fi
+
+])
+
+AC_DEFUN(AC_FIND_TIFF,
+[
+AC_REQUIRE([K_PATH_X])
+AC_REQUIRE([AC_FIND_ZLIB])
+AC_REQUIRE([AC_FIND_JPEG])
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+KDE_TRY_TIFFLIB(tiff, [],
+ KDE_TRY_TIFFLIB(tiff34))
+
+AC_SUBST(LIBTIFF)
+])
+
+
+AC_DEFUN(AC_FIND_PNG,
+[
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+AC_REQUIRE([AC_FIND_ZLIB])
+AC_MSG_CHECKING([for libpng])
+AC_CACHE_VAL(ac_cv_lib_png,
+[
+kde_save_LIBS="$LIBS"
+LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET"
+kde_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+AC_LANG_C
+AC_TRY_LINK(dnl
+ [
+ #include<png.h>
+ ],
+ [
+ png_structp png_ptr = png_create_read_struct( /* image ptr */
+ PNG_LIBPNG_VER_STRING, 0, 0, 0 );
+ return( png_ptr != 0 );
+ ],
+ eval "ac_cv_lib_png='-lpng $LIBZ -lm'",
+ eval "ac_cv_lib_png=no"
+)
+LIBS="$kde_save_LIBS"
+CFLAGS="$kde_save_CFLAGS"
+])dnl
+if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then
+ AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng])
+ LIBPNG="$ac_cv_lib_png"
+ AC_SUBST(LIBPNG)
+ AC_MSG_RESULT($ac_cv_lib_png)
+else
+ AC_MSG_RESULT(no)
+ LIBPNG=""
+ AC_SUBST(LIBPNG)
+fi
+])
+
+AC_DEFUN(AC_CHECK_BOOL,
+[
+ AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool])
+])
+
+AC_DEFUN(AC_CHECK_GNU_EXTENSIONS,
+[
+AC_MSG_CHECKING(if you need GNU extensions)
+AC_CACHE_VAL(ac_cv_gnu_extensions,
+[
+cat > conftest.c << EOF
+#include <features.h>
+
+#ifdef __GNU_LIBRARY__
+yes
+#endif
+EOF
+
+if (eval "$ac_cpp conftest.c") 2>&5 |
+ egrep "yes" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_gnu_extensions=yes
+else
+ ac_cv_gnu_extensions=no
+fi
+])
+
+AC_MSG_RESULT($ac_cv_gnu_extensions)
+if test "$ac_cv_gnu_extensions" = "yes"; then
+ AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions])
+fi
+])
+
+AC_DEFUN(KDE_CHECK_COMPILER_FLAG,
+[
+AC_REQUIRE([AC_CHECK_COMPILERS])
+AC_MSG_CHECKING(whether $CXX supports -$1)
+kde_cache=`echo $1 | sed 'y%.=/+-%___p_%'`
+AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache,
+[
+echo 'int main() { return 0; }' >conftest.cc
+eval "kde_cv_prog_cxx_$kde_cache=no"
+if test -z "`$CXX -$1 -c conftest.cc 2>&1`"; then
+ if test -z "`$CXX -$1 -o conftest conftest.o 2>&1`"; then
+ eval "kde_cv_prog_cxx_$kde_cache=yes"
+ fi
+fi
+rm -f conftest*
+])
+if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
+ AC_MSG_RESULT(yes)
+ :
+ $2
+else
+ AC_MSG_RESULT(no)
+ :
+ $3
+fi
+])
+
+AC_DEFUN(KDE_PROG_CC_PG,
+[ AC_CACHE_CHECK(whether ${CC-cc} accepts -pg, kde_cv_prog_cc_pg,
+ [echo 'void f(){}' > conftest.c
+ if test -z "`${CC-cc} -pg -c conftest.c 2>&1`"; then
+ kde_cv_prog_cc_pg=yes
+ else
+ kde_cv_prog_cc_pg=no
+ fi
+ rm -f conftest*
+])])
+
+AC_DEFUN(KDE_PROG_CXX_PG,
+[ AC_CACHE_CHECK(whether ${CXX-g++} accepts -pg, kde_cv_prog_cxx_pg,
+ [echo 'void f(){}' > conftest.cc
+ if test -z "`${CXX-g++} -pg -c conftest.cc 2>&1`"; then
+ kde_cv_prog_cxx_pg=yes
+ else
+ kde_cv_prog_cxx_pg=no
+ fi
+ rm -f conftest*
+])])
+
+dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables
+dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever])
+dnl it's all white-space separated
+AC_DEFUN(AC_REMOVE_FORBIDDEN,
+[ __val=$$1
+ __forbid=" $2 "
+ if test -n "$__val"; then
+ __new=""
+ ac_save_IFS=$IFS
+ IFS=" "
+ for i in $__val; do
+ case "$__forbid" in
+ *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;;
+ *) # Careful to not add spaces, where there were none, because otherwise
+ # libtool gets confused, if we change e.g. CXX
+ if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
+ esac
+ done
+ IFS=$ac_save_IFS
+ $1=$__new
+ fi
+])
+
+dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given
+AC_DEFUN(AC_VALIDIFY_CXXFLAGS,
+[dnl
+ AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath])
+ AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath])
+])
+
+AC_DEFUN(AC_CHECK_COMPILERS,
+[
+ dnl this is somehow a fat lie, but prevents other macros from double checking
+ AC_PROVIDE([AC_PROG_CC])
+ AC_PROVIDE([AC_PROG_CPP])
+ AC_PROVIDE([AC_PROG_CXX])
+ AC_PROVIDE([AC_PROG_CXXCPP])
+
+ AC_ARG_ENABLE(debug,[ --enable-debug enables debug symbols [default=no]],
+ [
+ if test $enableval = "no"; dnl
+ then
+ kde_use_debug_code="no"
+ kde_use_debug_define=yes
+ else
+ kde_use_debug_code="yes"
+ kde_use_debug_define=no
+ fi
+ ], [kde_use_debug_code="no"
+ kde_use_debug_define=no
+ ])
+ dnl Just for configure --help
+ AC_ARG_ENABLE(dummyoption,[ --disable-debug disables debug output and debug symbols [default=no]],[],[])
+
+ AC_ARG_ENABLE(strict,[ --enable-strict compiles with strict compiler options (may not work!)],
+ [
+ if test $enableval = "no"; then
+ kde_use_strict_options="no"
+ else
+ kde_use_strict_options="yes"
+ fi
+ ], [kde_use_strict_options="no"])
+
+ AC_ARG_ENABLE(profile,[ --enable-profile creates profiling infos [default=no]],
+ [kde_use_profiling=$enableval],
+ [kde_use_profiling="no"]
+ )
+
+dnl this was AC_PROG_CC. I had to include it manualy, since I had to patch it
+ AC_MSG_CHECKING(for a C-Compiler)
+ dnl if there is one, print out. if not, don't matter
+ AC_MSG_RESULT($CC)
+
+ if test -z "$CC"; then AC_CHECK_PROG(CC, gcc, gcc) fi
+ if test -z "$CC"; then AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) fi
+ if test -z "$CC"; then AC_CHECK_PROG(CC, xlc, xlc) fi
+ test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
+
+ AC_PROG_CC_WORKS
+ AC_PROG_CC_GNU
+
+ if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+ else
+ GCC=
+ fi
+
+ USER_CFLAGS=$CFLAGS
+ CFLAGS=
+
+ if test -z "$CFLAGS"; then
+ if test "$kde_use_debug_code" = "yes"; then
+ AC_PROG_CC_G
+ if test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g"
+ case $host in
+ *-*-linux-gnu)
+ CFLAGS="$CFLAGS -ansi -W -Wall -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE -D_BSD_SOURCE"
+ ;;
+ esac
+ fi
+ else
+ if test "$GCC" = "yes"; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=""
+ fi
+ if test "$kde_use_debug_define" = "yes"; then
+ CFLAGS="$CFLAGS -DNDEBUG"
+ dnl damn buggy compilers :-(
+ dnl if test "$GCC" = "yes"; then
+ dnl CFLAGS="$CFLAGS -fomit-frame-pointer"
+ dnl CXXFLAGS="$CXXFLAGS -fomit-frame-pointer"
+ dnl fi
+ fi
+ fi
+
+ if test "$kde_use_profiling" = yes; then
+ KDE_PROG_CC_PG
+ if test "$kde_cv_prog_cc_pg" = yes; then
+ CFLAGS="$CFLAGS -pg"
+ fi
+ fi
+
+ if test "$GCC" = "yes"; then
+ CFLAGS="$CFLAGS"
+
+ if test "$kde_use_strict_options" = "yes"; then
+ CFLAGS="$CFLAGS -W -Wall -ansi -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings"
+ fi
+ fi
+
+ fi
+
+ case "$host" in
+ *-*-sysv4.2uw*) CFLAGS="$CFLAGS -D_UNIXWARE";;
+ *-*-sysv5uw7*) CFLAGS="$CFLAGS -D_UNIXWARE7";;
+ esac
+
+ if test -n "$USER_CFLAGS"; then
+ CFLAGS="$CFLAGS $USER_CFLAGS"
+ fi
+
+ if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then
+ LDFLAGS=""
+ fi
+
+
+dnl this is AC_PROG_CPP. I had to include it here, since autoconf checks
+dnl dependecies between AC_PROG_CPP and AC_PROG_CC (or is it automake?)
+
+ AC_MSG_CHECKING(how to run the C preprocessor)
+ # On Suns, sometimes $CPP names a directory.
+ if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+ fi
+ if test -z "$CPP"; then
+ AC_CACHE_VAL(ac_cv_prog_CPP,
+ [ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ dnl Use a header file that comes with gcc, so configuring glibc
+ dnl with a fresh cross-compiler works.
+ AC_TRY_CPP([#include <assert.h>
+ Syntax Error], ,
+ CPP="${CC-cc} -E -traditional-cpp"
+ AC_TRY_CPP([#include <assert.h>
+ Syntax Error], , CPP=/lib/cpp))
+ ac_cv_prog_CPP="$CPP"])dnl
+ CPP="$ac_cv_prog_CPP"
+ else
+ ac_cv_prog_CPP="$CPP"
+ fi
+ AC_MSG_RESULT($CPP)
+ AC_SUBST(CPP)dnl
+
+
+ AC_MSG_CHECKING(for a C++-Compiler)
+ dnl if there is one, print out. if not, don't matter
+ AC_MSG_RESULT($CXX)
+
+ if test -z "$CXX"; then AC_CHECK_PROG(CXX, g++, g++) fi
+ if test -z "$CXX"; then AC_CHECK_PROG(CXX, CC, CC) fi
+ if test -z "$CXX"; then AC_CHECK_PROG(CXX, xlC, xlC) fi
+ if test -z "$CXX"; then AC_CHECK_PROG(CXX, DCC, DCC) fi
+ test -z "$CXX" && AC_MSG_ERROR([no acceptable C++-compiler found in \$PATH])
+
+ AC_PROG_CXX_WORKS
+ AC_PROG_CXX_GNU
+
+ if test $ac_cv_prog_gxx = yes; then
+ GXX=yes
+ fi
+
+ USER_CXXFLAGS=$CXXFLAGS
+ CXXFLAGS=""
+
+ if test -z "$CXXFLAGS"; then
+ if test "$kde_use_debug_code" = "yes"; then
+ AC_PROG_CXX_G
+ if test $ac_cv_prog_cxx_g = yes; then
+ CXXFLAGS="-g"
+ case $host in dnl
+ *-*-linux-gnu)
+ CXXFLAGS="$CXXFLAGS -ansi -D_XOPEN_SOURCE -D_BSD_SOURCE -Wbad-function-cast -Wcast-align -Wundef -Wconversion"
+ ;;
+ esac
+ fi
+ else
+ if test "$GXX" = "yes"; then
+ CXXFLAGS="-O2"
+ fi
+ if test "$kde_use_debug_define" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -DNDEBUG"
+ fi
+ fi
+
+ if test "$kde_use_profiling" = yes; then
+ KDE_PROG_CXX_PG
+ if test "$kde_cv_prog_cxx_pg" = yes; then
+ CXXFLAGS="$CXXFLAGS -pg"
+ fi
+ fi
+
+ KDE_CHECK_COMPILER_FLAG(fno-exceptions,
+ [
+ CXXFLAGS="$CXXFLAGS -fno-exceptions"
+ ])
+
+dnl WABA: Nothing wrong with RTTI, keep it on.
+dnl KDE_CHECK_COMPILER_FLAG(fno-rtti,
+dnl [
+dnl CXXFLAGS="$CXXFLAGS -fno-rtti"
+dnl ])
+
+ KDE_CHECK_COMPILER_FLAG(fno-check-new,
+ [
+ CXXFLAGS="$CXXFLAGS -fno-check-new"
+ ])
+
+ if test "$GXX" = "yes"; then
+ CXXFLAGS="$CXXFLAGS"
+
+ if test true || test "$kde_use_debug_code" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings"
+
+ KDE_CHECK_COMPILER_FLAG(Wno-long-long,
+ [
+ CXXFLAGS="$CXXFLAGS -Wno-long-long"
+ ])
+ KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,
+ [
+ CXXFLAGS="$CXXFLAGS -Wnon-virtual-dtor"
+ ])
+ KDE_CHECK_COMPILER_FLAG(fno-builtin,
+ [
+ CXXFLAGS="$CXXFLAGS -fno-builtin"
+ ])
+
+ fi
+
+ if test "$kde_use_strict_options" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -Wcast-qual -Wbad-function-cast -Wshadow -Wcast-align"
+ fi
+
+ if test "$kde_very_strict" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -Wold-style-cast -Wredundant-decls -Wconversion"
+ fi
+ fi
+ fi
+
+ KDE_CHECK_COMPILER_FLAG(fexceptions,
+ [
+ USE_EXCEPTIONS="-fexceptions"
+ ],
+ USE_EXCEPTIONS=
+ )
+ AC_SUBST(USE_EXCEPTIONS)
+
+ KDE_CHECK_COMPILER_FLAG(frtti,
+ [
+ USE_RTTI="-frtti"
+ ],
+ USE_RTTI=
+ )
+ AC_SUBST(USE_RTTI)
+
+ case "$host" in
+ *-*-irix*) test "$GXX" = yes && CXXFLAGS="$CXXFLAGS -D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS" ;;
+ *-*-sysv4.2uw*) CXXFLAGS="$CXXFLAGS -D_UNIXWARE";;
+ *-*-sysv5uw7*) CXXFLAGS="$CXXFLAGS -D_UNIXWARE7";;
+ *-*-solaris*)
+ if test "$GXX" = yes; then
+ libstdcpp=`gcc -print-file-name=libstdc++.so`
+ if test ! -f $libstdcpp; then
+ AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so])
+ fi
+ fi
+ ;;
+ esac
+
+ if test -n "$USER_CXXFLAGS"; then
+ CXXFLAGS="$CXXFLAGS $USER_CXXFLAGS"
+ fi
+
+ AC_VALIDIFY_CXXFLAGS
+
+ AC_MSG_CHECKING(how to run the C++ preprocessor)
+ if test -z "$CXXCPP"; then
+ AC_CACHE_VAL(ac_cv_prog_CXXCPP,
+ [
+ AC_LANG_SAVE[]dnl
+ AC_LANG_CPLUSPLUS[]dnl
+ CXXCPP="${CXX-g++} -E"
+ AC_TRY_CPP([#include <stdlib.h>], , CXXCPP=/lib/cpp)
+ ac_cv_prog_CXXCPP="$CXXCPP"
+ AC_LANG_RESTORE[]dnl
+ ])dnl
+ CXXCPP="$ac_cv_prog_CXXCPP"
+ fi
+ AC_MSG_RESULT($CXXCPP)
+ AC_SUBST(CXXCPP)dnl
+
+ # the following is to allow programs, that are known to
+ # have problems when compiled with -O2
+ if test -n "$CXXFLAGS"; then
+ kde_safe_IFS=$IFS
+ IFS=" "
+ NOOPT_CXXFLAGS=""
+ for i in $CXXFLAGS; do
+ case $i in
+ -O*)
+ ;;
+ *)
+ NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS $i"
+ ;;
+ esac
+ done
+ IFS=$kde_safe_IFS
+ fi
+ AC_SUBST(NOOPT_CXXFLAGS)
+
+ KDE_CHECK_FINAL
+
+ ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), [])
+
+ KDE_CXXFLAGS=
+ AC_SUBST(KDE_CXXFLAGS)
+])
+
+AC_DEFUN(KDE_ADD_DEPENDENCIES,
+[
+ [A]M_DEPENDENCIES(CC)
+ [A]M_DEPENDENCIES(CXX)
+])
+
+dnl just a wrapper to clean up configure.in
+AC_DEFUN(KDE_PROG_LIBTOOL,
+[
+AC_REQUIRE([AC_CHECK_COMPILERS])
+AC_REQUIRE([AC_ENABLE_SHARED])
+AC_REQUIRE([AC_ENABLE_STATIC])
+
+AC_REQUIRE([AC_LIBTOOL_DLOPEN])
+
+AC_LANG_SAVE
+AC_LANG_C
+AC_OBJEXT
+AC_EXEEXT
+AC_LANG_RESTORE
+
+AM_PROG_LIBTOOL
+AC_LIBTOOL_CXX
+
+LIBTOOL_SHELL="/bin/sh ./libtool"
+# LIBTOOL="$LIBTOOL --silent"
+KDE_PLUGIN="-avoid-version -module -no-undefined"
+AC_SUBST(KDE_PLUGIN)
+])
+
+AC_DEFUN(KDE_CHECK_TYPES,
+[ AC_CHECK_SIZEOF(int, 4)dnl
+ AC_CHECK_SIZEOF(long, 4)dnl
+ AC_CHECK_SIZEOF(char *, 4)dnl
+])dnl
+
+AC_DEFUN(KDE_DO_IT_ALL,
+[
+AC_CANONICAL_SYSTEM
+AC_ARG_PROGRAM
+AM_INIT_AUTOMAKE($1, $2)
+AM_DISABLE_LIBRARIES
+AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde})
+AC_CHECK_COMPILERS
+KDE_PROG_LIBTOOL
+AM_KDE_WITH_NLS
+AC_PATH_KDE
+])
+
+AC_DEFUN(AC_CHECK_RPATH,
+[
+AC_MSG_CHECKING(for rpath)
+AC_ARG_ENABLE(rpath,
+ [ --disable-rpath do not use the rpath feature of ld],
+ USE_RPATH=$enableval, USE_RPATH=yes)
+
+if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then
+
+ KDE_RPATH="-R \$(kde_libraries)"
+
+ if test -n "$qt_libraries"; then
+ KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)"
+ fi
+ dnl $x_libraries is set to /usr/lib in case
+ if test -n "$X_LDFLAGS"; then
+ KDE_RPATH="$KDE_RPATH -R \$(x_libraries)"
+ fi
+ if test -n "$KDE_EXTRA_RPATH"; then
+ KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)"
+ fi
+fi
+AC_SUBST(KDE_EXTRA_RPATH)
+AC_SUBST(KDE_RPATH)
+AC_MSG_RESULT($USE_RPATH)
+])
+
+dnl Check for the type of the third argument of getsockname
+AC_DEFUN(AC_CHECK_KSIZE_T,
+[AC_MSG_CHECKING(for the third argument of getsockname)
+AC_CACHE_VAL(ac_cv_ksize_t,
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+[AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/socket.h>
+],[
+socklen_t a=0;
+getsockname(0,(struct sockaddr*)0, &a);
+],
+ac_cv_ksize_t=socklen_t,
+ac_cv_ksize_t=)
+if test -z "$ac_cv_ksize_t"; then
+ac_safe_cxxflags="$CXXFLAGS"
+if test "$GCC" = "yes"; then
+ CXXFLAGS="-Werror $CXXFLAGS"
+fi
+AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/socket.h>
+],[
+int a=0;
+getsockname(0,(struct sockaddr*)0, &a);
+],
+ac_cv_ksize_t=int,
+ac_cv_ksize_t=size_t)
+CXXFLAGS="$ac_safe_cxxflags"
+fi
+AC_LANG_RESTORE
+])
+
+if test -z "$ac_cv_ksize_t"; then
+ ac_cv_ksize_t=int
+fi
+
+AC_MSG_RESULT($ac_cv_ksize_t)
+AC_DEFINE_UNQUOTED(ksize_t, $ac_cv_ksize_t,
+ [Define the type of the third argument for getsockname]
+)
+
+])
+
+dnl This is a merge of some macros out of the gettext aclocal.m4
+dnl since we don't need anything, I took the things we need
+dnl the copyright for them is:
+dnl >
+dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+dnl This Makefile.in is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+dnl >
+dnl for this file it is relicensed under LGPL
+
+AC_DEFUN(AM_KDE_WITH_NLS,
+ [
+ dnl If we use NLS figure out what method
+
+ AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt,
+ [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+
+ if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then
+ AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it])
+ GMSGFMT=":"
+ fi
+ MSGFMT=$GMSGFMT
+ AC_SUBST(GMSGFMT)
+ AC_SUBST(MSGFMT)
+
+ AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+
+ dnl Test whether we really found GNU xgettext.
+ if test "$XGETTEXT" != ":"; then
+ dnl If it is no GNU xgettext we define it as : so that the
+ dnl Makefiles still can work.
+ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+ : ;
+ else
+ AC_MSG_RESULT(
+ [found xgettext programs is not GNU xgettext; ignore it])
+ XGETTEXT=":"
+ fi
+ fi
+ AC_SUBST(XGETTEXT)
+
+ ])
+
+# Search path for a program which passes the given test.
+# Ulrich Drepper <drepper at cygnus.com>, 1996.
+
+# serial 1
+# Stephan Kulow: I appended a _KDE against name conflicts
+
+dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN(AM_PATH_PROG_WITH_TEST_KDE,
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ /*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test -n "[$]$1"; then
+ AC_MSG_RESULT([$]$1)
+else
+ AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
+
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+# Ulrich Drepper <drepper at cygnus.com>, 1995.
+
+# serial 1
+
+AC_DEFUN(AM_LC_MESSAGES,
+ [if test $ac_cv_header_locale_h = yes; then
+ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+ [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES])
+ fi
+ fi])
+
+dnl From Jim Meyering.
+dnl FIXME: migrate into libit.
+
+AC_DEFUN(AM_FUNC_OBSTACK,
+[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack,
+ [AC_TRY_LINK([#include "obstack.h"],
+ [struct obstack *mem;obstack_free(mem,(char *) 0)],
+ am_cv_func_obstack=yes,
+ am_cv_func_obstack=no)])
+ if test $am_cv_func_obstack = yes; then
+ AC_DEFINE(HAVE_OBSTACK)
+ else
+ LIBOBJS="$LIBOBJS obstack.o"
+ fi
+])
+
+dnl From Jim Meyering. Use this if you use the GNU error.[ch].
+dnl FIXME: Migrate into libit
+
+AC_DEFUN(AM_FUNC_ERROR_AT_LINE,
+[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line,
+ [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");],
+ am_cv_lib_error_at_line=yes,
+ am_cv_lib_error_at_line=no)])
+ if test $am_cv_lib_error_at_line = no; then
+ LIBOBJS="$LIBOBJS error.o"
+ fi
+ AC_SUBST(LIBOBJS)dnl
+])
+
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper at cygnus.com>, 1995.
+
+# serial 1
+# Stephan Kulow: I put a KDE in it to avoid name conflicts
+
+AC_DEFUN(AM_KDE_GNU_GETTEXT,
+ [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_RANLIB])dnl
+ AC_REQUIRE([AC_HEADER_STDC])dnl
+ AC_REQUIRE([AC_TYPE_OFF_T])dnl
+ AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+ AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+ AC_REQUIRE([AC_FUNC_MMAP])dnl
+ AC_REQUIRE([AM_KDE_WITH_NLS])dnl
+ AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h string.h values.h alloca.h])
+ AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
+__argz_count __argz_stringify __argz_next])
+
+ AC_MSG_CHECKING(for stpcpy)
+ AC_CACHE_VAL(kde_cv_func_stpcpy,
+ [
+ kde_safe_cxxflags=$CXXFLAGS
+ CXXFLAGS="-Wmissing-prototypes -Werror"
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_COMPILE([
+ #include <string.h>
+ ],
+ [
+ char buffer[200];
+ stpcpy(buffer, buffer);
+ ],
+ kde_cv_func_stpcpy=yes,
+ kde_cv_func_stpcpy=no)
+ AC_LANG_RESTORE
+ CXXFLAGS=$kde_safe_cxxflags
+ ])
+ AC_MSG_RESULT($kde_cv_func_stpcpy)
+ if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then
+ AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy])
+ fi
+
+ AM_LC_MESSAGES
+
+ if test "x$CATOBJEXT" != "x"; then
+ if test "x$ALL_LINGUAS" = "x"; then
+ LINGUAS=
+ else
+ AC_MSG_CHECKING(for catalogs to be installed)
+ NEW_LINGUAS=
+ for lang in ${LINGUAS=$ALL_LINGUAS}; do
+ case "$ALL_LINGUAS" in
+ *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+ esac
+ done
+ LINGUAS=$NEW_LINGUAS
+ AC_MSG_RESULT($LINGUAS)
+ fi
+
+ dnl Construct list of names of catalog files to be constructed.
+ if test -n "$LINGUAS"; then
+ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+ fi
+ fi
+
+ ])
+
+AC_DEFUN(AC_HAVE_XPM,
+ [AC_REQUIRE_CPP()dnl
+ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+ test -z "$XPM_LDFLAGS" && XPM_LDFLAGS=
+ test -z "$XPM_INCLUDE" && XPM_INCLUDE=
+
+ AC_ARG_WITH(xpm, [ --without-xpm disable color pixmap XPM tests],
+ xpm_test=$withval, xpm_test="yes")
+ if test "x$xpm_test" = xno; then
+ ac_cv_have_xpm=no
+ else
+ AC_MSG_CHECKING(for XPM)
+ AC_CACHE_VAL(ac_cv_have_xpm,
+ [
+ AC_LANG_C
+ ac_save_ldflags="$LDFLAGS"
+ ac_save_cflags="$CFLAGS"
+ LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET"
+ CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES"
+ test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS"
+ AC_TRY_LINK([#include <X11/xpm.h>],[],
+ ac_cv_have_xpm="yes",ac_cv_have_xpm="no")
+ LDFLAGS="$ac_save_ldflags"
+ CFLAGS="$ac_save_cflags"
+ ])dnl
+
+ if test "$ac_cv_have_xpm" = no; then
+ AC_MSG_RESULT(no)
+ XPM_LDFLAGS=""
+ XPMINC=""
+ $2
+ else
+ AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support])
+ if test "$XPM_LDFLAGS" = ""; then
+ XPMLIB='-lXpm $(LIB_X11)'
+ else
+ XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)'
+ fi
+ if test "$XPM_INCLUDE" = ""; then
+ XPMINC=""
+ else
+ XPMINC="-I$XPM_INCLUDE"
+ fi
+ AC_MSG_RESULT(yes)
+ $1
+ fi
+ fi
+ AC_SUBST(XPMINC)
+ AC_SUBST(XPMLIB)
+])
+
+AC_DEFUN(AC_HAVE_DPMS,
+ [AC_REQUIRE_CPP()dnl
+ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+ test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS=
+ test -z "$DPMS_INCLUDE" && DPMS_INCLUDE=
+ DPMS_LIB=
+
+ AC_ARG_WITH(dpms, [ --without-dpms disable DPMS power saving],
+ dpms_test=$withval, dpms_test="yes")
+ if test "x$dpms_test" = xno; then
+ ac_cv_have_dpms=no
+ else
+ AC_MSG_CHECKING(for DPMS)
+ dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms.
+ dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms".
+ AC_CACHE_VAL(ac_cv_have_dpms,
+ [
+ AC_LANG_C
+ ac_save_ldflags="$LDFLAGS"
+ ac_save_cflags="$CFLAGS"
+ ac_save_libs="$LIBS"
+ LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET"
+ CFLAGS="$CFLAGS $X_INCLUDES"
+ test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS"
+ AC_TRY_LINK([
+ #include <X11/Xproto.h>
+ #include <X11/X.h>
+ #include <X11/Xlib.h>
+ #include <X11/extensions/dpms.h>
+ int foo_test_dpms()
+ { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[],
+ ac_cv_have_dpms="yes", [
+ LDFLAGS="$ac_save_ldflags"
+ CFLAGS="$ac_save_cflags"
+ LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET"
+ LIBS="$LIBS -lXdpms"
+ CFLAGS="$CFLAGS $X_INCLUDES"
+ test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS"
+ AC_TRY_LINK([
+ #include <X11/Xproto.h>
+ #include <X11/X.h>
+ #include <X11/Xlib.h>
+ #include <X11/extensions/dpms.h>
+ int foo_test_dpms()
+ { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[],
+ [
+ ac_cv_have_dpms="-lXdpms"
+ ],ac_cv_have_dpms="no")
+ ])
+ LDFLAGS="$ac_save_ldflags"
+ CFLAGS="$ac_save_cflags"
+ LIBS="$ac_save_libs"
+ ])dnl
+
+ if test "$ac_cv_have_dpms" = no; then
+ AC_MSG_RESULT(no)
+ DPMS_LDFLAGS=""
+ DPMSINC=""
+ $2
+ else
+ AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support])
+ if test "$ac_cv_have_dpms" = "-lXdpms"; then
+ DPMS_LIB="-lXdpms"
+ fi
+ if test "$DPMS_LDFLAGS" = ""; then
+ DPMSLIB="$DPMS_LIB "'$(LIB_X11)'
+ else
+ DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)'
+ fi
+ if test "$DPMS_INCLUDE" = ""; then
+ DPMSINC=""
+ else
+ DPMSINC="-I$DPMS_INCLUDE"
+ fi
+ AC_MSG_RESULT(yes)
+ $1
+ fi
+ fi
+ AC_SUBST(DPMSINC)
+ AC_SUBST(DPMSLIB)
+])
+
+AC_DEFUN(AC_HAVE_GL,
+ [AC_REQUIRE_CPP()dnl
+ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+ test -z "$GL_LDFLAGS" && GL_LDFLAGS=
+ test -z "$GL_INCLUDE" && GL_INCLUDE=
+
+ AC_ARG_WITH(gl, [ --without-gl disable 3D GL modes],
+ gl_test=$withval, gl_test="yes")
+ if test "x$gl_test" = xno; then
+ ac_cv_have_gl=no
+ else
+ AC_MSG_CHECKING(for GL)
+ AC_CACHE_VAL(ac_cv_have_gl,
+ [
+ AC_LANG_C
+ ac_save_ldflags="$LDFLAGS"
+ ac_save_cflags="$CFLAGS"
+ LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU -lX11 -lXext -lm $LIBSOCKET"
+ CFLAGS="$CFLAGS $X_INCLUDES"
+ test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS"
+ AC_TRY_LINK([#include <GL/gl.h>
+#include <GL/glu.h>
+], [],
+ ac_cv_have_gl="mesa", ac_cv_have_gl="no")
+ if test "x$ac_cv_have_gl" = "xno"; then
+ LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGL -lGLU -lX11 -lXext -lm $LIBSOCKET"
+ CFLAGS="$ac_save_cflags $X_INCLUDES"
+ test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS"
+ AC_TRY_LINK([#include <GL/gl.h>
+#include <GL/glu.h>
+], [],
+ ac_cv_have_gl="yes", ac_cv_have_gl="no")
+ fi
+ LDFLAGS="$ac_save_ldflags"
+ CFLAGS="$ac_save_cflags"
+ ])dnl
+
+ if test "$ac_cv_have_gl" = "no"; then
+ AC_MSG_RESULT(no)
+ GL_LDFLAGS=""
+ GLINC=""
+ $2
+ else
+ AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)])
+ if test "$GL_LDFLAGS" = ""; then
+ if test "$ac_cv_have_gl" = "mesa"; then
+ GLLIB='-lMesaGL -lMesaGLU $(LIB_X11)'
+ else
+ GLLIB='-lGL -lGLU $(LIB_X11)'
+ fi
+ else
+ if test "$ac_cv_have_gl" = "mesa"; then
+ GLLIB="$GL_LDFLAGS -lMesaGL -lMesaGLU "'$(LIB_X11)'
+ else
+ GLLIB="$GL_LDFLAGS -lGL -lGLU "'$(LIB_X11)'
+ fi
+ fi
+ if test "$GL_INCLUDE" = ""; then
+ GLINC=""
+ else
+ GLINC="-I$GL_INCLUDE"
+ fi
+ AC_MSG_RESULT($ac_cv_have_gl)
+ $1
+ fi
+ fi
+ AC_SUBST(GLINC)
+ AC_SUBST(GLLIB)
+])
+
+ dnl PAM pam
+
+ dnl Should test for PAM (Pluggable Authentication Modules)
+ AC_DEFUN(AC_PATH_PAM_DIRECT,
+ [
+ test -z "$pam_direct_test_library" && pam_direct_test_library=pam
+ test -z "$pam_direct_test_include" && pam_direct_test_include=security/pam_appl.h
+
+ for ac_dir in \
+ \
+ /usr/local/include \
+ /usr/include \
+ /usr/unsupported/include \
+ /opt/include \
+ /usr/pam/include \
+ /usr/local/pam/include \
+ /usr/lib/pam/include \
+ \
+ $extra_include \
+ ; \
+ do
+ if test -r "$ac_dir/$pam_direct_test_include"; then
+ no_pam= ac_pam_includes=$ac_dir
+ break
+ fi
+ done
+
+ # First see if replacing the include by lib works.
+ for ac_dir in `echo "$ac_pam_includes" | sed s/include/lib/` \
+ \
+ /lib \
+ /usr/lib \
+ /usr/local/lib \
+ /usr/unsupported/lib \
+ /lib/security \
+ /usr/security/lib \
+ $extra_lib \
+ ; \
+ do
+ for ac_extension in a so sl; do
+ if test -r $ac_dir/lib${pam_direct_test_library}.$ac_extension; then
+ no_pam= ac_pam_libraries=$ac_dir
+ break 2
+ fi
+ done
+ done
+])
+
+AC_DEFUN(AC_PATH_PAM,
+ [
+ AC_REQUIRE([KDE_CHECK_LIBDL])
+ AC_REQUIRE_CPP()dnl
+
+dnl AC_CHECK_LIB(pam_misc, main, [PAM_MISC_LIB="-lpam_misc"
+dnl AC_DEFINE_UNQUOTED(HAVE_PAM_MISC, 1, [Define if you have a PAM implementation with the pam_misc library])], [], [-lpam $LIBDL])
+
+ AC_MSG_CHECKING(for PAM)
+ AC_ARG_WITH(pam,
+[ --with-pam[=ARG] enable support for PAM: ARG=[yes|no|service name]],
+ [
+ if test "x$withval" = "xyes"; then
+ no_pam=
+ default_pam=yes
+ elif test "x$withval" = "xno"; then
+ no_pam=yes
+ else
+ no_pam=
+ pam_service="$withval"
+ if test -z "$pam_service"; then
+ default_pam=yes
+ else
+ default_pam=
+ fi
+ fi
+ ], no_pam=yes
+ )
+
+ if test ! "$no_pam" = yes; then
+
+ AC_CACHE_VAL(ac_cv_path_pam,
+ [
+ ac_pam_includes=NONE
+ ac_pam_libraries=NONE
+ if test -z "$pam_libraries"; then
+ pam_libraries=NONE
+ fi
+ if test -z "$pam_includes"; then
+ pam_includes=NONE
+ fi
+
+ AC_PATH_PAM_DIRECT
+
+ test "x$pam_includes" = xNONE && pam_includes=$ac_pam_includes
+ test "x$pam_libraries" = xNONE && pam_libraries=$ac_pam_libraries
+
+ if test ! "x$pam_includes" = xNONE && test ! "x$pam_libraries" = xNONE; then
+ ac_pam_libs="-lpam $PAM_MISC_LIB $LIBDL"
+ ac_cv_path_pam="no_pam= ac_pam_includes=$ac_pam_includes ac_pam_libraries=$ac_pam_libraries ac_pam_libs=\"$ac_pam_libs\""
+ else
+ ac_cv_path_pam="no_pam=yes"
+ fi
+ ])
+
+ eval "$ac_cv_path_pam"
+
+ fi
+
+ if test "$no_pam" = yes; then
+ AC_MSG_RESULT(no)
+ else
+ AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules); Redhat-Users!])
+ PAMLIBS="$ac_pam_libs"
+ test "x$pam_includes" = xNONE && pam_includes=$ac_pam_includes
+ test "x$pam_libraries" = xNONE && pam_libraries=$ac_pam_libraries
+ AC_MSG_RESULT([libraries $pam_libraries, headers $pam_includes])
+ if test "$default_pam" = yes; then
+ AC_MSG_RESULT(["default pam service name will be used"])
+ else
+ AC_DEFINE_UNQUOTED(KDE_PAM_SERVICE,"$pam_service", [Define to change the default name of the PAM service used by KDE])
+ AC_MSG_RESULT(["pam service name will be: " $pam_service])
+ fi
+dnl test whether struct pam_message is const (Linux) or not (Sun)
+ pam_appl_h="$ac_pam_includes/security/pam_appl.h"
+ AC_MSG_CHECKING(for const pam_message)
+ AC_EGREP_HEADER([struct pam_message],
+ $pam_appl_h,
+ [ AC_EGREP_HEADER([const struct pam_message],
+ $pam_appl_h,
+ [AC_MSG_RESULT(["const: Linux-type PAM"]) ],
+ [AC_MSG_RESULT(["nonconst: Sun-type PAM"])
+ AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])]
+ )],
+ [AC_MSG_RESULT(["not found - assume const, Linux-type PAM"])]
+ )
+ fi
+
+ if test "x$pam_libraries" != x && test "x$pam_libraries" != xNONE ; then
+ PAMLIBPATHS="-L$pam_libraries"
+ fi
+ if test "x$pam_includes" != x && test "x$pam_includes" != xNONE ; then
+ PAMINC="-I$pam_includes"
+ fi
+
+ AC_SUBST(PAMINC)
+ AC_SUBST(PAMLIBS)
+ AC_SUBST(PAMLIBPATHS)
+
+])
+
+AC_DEFUN(KDE_CHECK_LIBDL,
+[
+AC_CHECK_LIB(dl, dlopen, [
+LIBDL="-ldl"
+ac_cv_have_dlfcn=yes
+])
+
+AC_CHECK_LIB(dld, shl_unload, [
+LIBDL="-ldld"
+ac_cv_have_shload=yes
+])
+
+AC_SUBST(LIBDL)
+])
+
+AC_DEFUN(KDE_CHECK_DLOPEN,
+[
+KDE_CHECK_LIBDL
+AC_CHECK_HEADERS(dlfcn.h dl.h)
+if test "$ac_cv_header_dlfcn_h" = "no"; then
+ ac_cv_have_dlfcn=no
+fi
+
+if test "$ac_cv_header_dl_h" = "no"; then
+ ac_cv_have_shload=no
+fi
+
+dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE
+dnl (MM)
+AC_ARG_ENABLE(dlopen,
+[ --disable-dlopen link statically [default=no]] ,
+enable_dlopen=$enableval,
+enable_dlopen=yes)
+
+# override the user's opinion, if we know it better ;)
+if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then
+ enable_dlopen=no
+fi
+
+if test "$ac_cv_have_dlfcn" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn])
+fi
+
+if test "$ac_cv_have_shload" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload])
+fi
+
+if test "$enable_dlopen" = no ; then
+ test -n "$1" && eval $1
+else
+ test -n "$2" && eval $2
+fi
+
+])
+
+AC_DEFUN(KDE_CHECK_DYNAMIC_LOADING,
+[
+KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no)
+KDE_PROG_LIBTOOL
+AC_MSG_CHECKING([dynamic loading])
+eval "`egrep '^build_libtool_libs=' libtool`"
+if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then
+ dynamic_loading=yes
+ AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING)
+else
+ dynamic_loading=no
+fi
+AC_MSG_RESULT($dynamic_loading)
+if test "$dynamic_loading" = "yes"; then
+ $1
+else
+ $2
+fi
+])
+
+AC_DEFUN(KDE_ADD_INCLUDES,
+[
+if test -z "$1"; then
+ test_include="Pix.h"
+else
+ test_include="$1"
+fi
+
+AC_MSG_CHECKING([for libg++ ($test_include)])
+
+AC_CACHE_VAL(kde_cv_libgpp_includes,
+[
+kde_cv_libgpp_includes=no
+
+ for ac_dir in \
+ \
+ /usr/include/g++ \
+ /usr/include \
+ /usr/unsupported/include \
+ /opt/include \
+ $extra_include \
+ ; \
+ do
+ if test -r "$ac_dir/$test_include"; then
+ kde_cv_libgpp_includes=$ac_dir
+ break
+ fi
+ done
+])
+
+AC_MSG_RESULT($kde_cv_libgpp_includes)
+if test "$kde_cv_libgpp_includes" != "no"; then
+ all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES"
+fi
+])
+])
+
+
+AC_DEFUN(KDE_CHECK_MICO,
+[
+AC_REQUIRE([KDE_CHECK_LIBDL])
+AC_REQUIRE([KDE_MISC_TESTS])
+AC_MSG_CHECKING(for MICO)
+
+if test -z "$MICODIR"; then
+ kde_micodir=/usr/local
+ else
+ kde_micodir="$MICODIR"
+fi
+
+AC_ARG_WITH(micodir,
+ [ --with-micodir=micodir where mico is installed ],
+ kde_micodir=$withval,
+ kde_micodir=$kde_micodir
+)
+
+AC_CACHE_VAL(kde_cv_mico_incdir,
+[
+ mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes"
+AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir)
+
+])
+kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'`
+
+if test ! -r $kde_micodir/include/CORBA.h; then
+ AC_MSG_ERROR([No CORBA.h found, specify another micodir])
+fi
+
+AC_MSG_RESULT($kde_micodir)
+
+MICO_INCLUDES=-I$kde_micodir/include
+AC_SUBST(MICO_INCLUDES)
+MICO_LDFLAGS=-L$kde_micodir/lib
+AC_SUBST(MICO_LDFLAGS)
+micodir=$kde_micodir
+AC_SUBST(micodir)
+
+AC_MSG_CHECKING([for MICO version])
+AC_CACHE_VAL(kde_cv_mico_version,
+[
+AC_LANG_C
+cat >conftest.$ac_ext <<EOF
+#include <stdio.h>
+#include <mico/version.h>
+int main() {
+
+ printf("MICO_VERSION=%s\n",MICO_VERSION);
+ return (0);
+}
+EOF
+ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest'
+if AC_TRY_EVAL(ac_compile); then
+ if eval `./conftest 2>&5`; then
+ kde_cv_mico_version=$MICO_VERSION
+ else
+ AC_MSG_ERROR([your system is not able to execute a small application to
+ find MICO version! Check $kde_micodir/include/mico/version.h])
+ fi
+else
+ AC_MSG_ERROR([your system is not able to compile a small application to
+ find MICO version! Check $kde_micodir/include/mico/version.h])
+fi
+])
+
+dnl installed MICO version
+mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
+mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
+mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
+
+if test "x$1" = "x"; then
+ req_version="2.3.0"
+else
+ req_version=$1
+fi
+
+dnl required MICO version
+req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
+req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
+req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
+
+if test "$mico_v_maj" -lt "$req_v_maj" || \
+ ( test "$mico_v_maj" -eq "$req_v_maj" && \
+ test "$mico_v_mid" -lt "$req_v_mid" ) || \
+ ( test "$mico_v_mid" -eq "$req_v_mid" && \
+ test "$mico_v_min" -lt "$req_v_min" )
+
+then
+ AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \
+at least is required. You should upgrade MICO.])
+else
+ AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)])
+fi
+
+LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL"
+AC_SUBST(LIBMICO)
+if test -z "$IDL"; then
+ IDL='$(kde_bindir)/cuteidl'
+fi
+AC_SUBST(IDL)
+IDL_DEPENDENCIES='$(kde_includes)/CUTE.h'
+AC_SUBST(IDL_DEPENDENCIES)
+
+idldir="\$(includedir)/idl"
+AC_SUBST(idldir)
+
+])
+
+AC_DEFUN(KDE_CHECK_MINI_STL,
+[
+AC_REQUIRE([KDE_CHECK_MICO])
+
+AC_MSG_CHECKING(if we use mico's mini-STL)
+AC_CACHE_VAL(kde_cv_have_mini_stl,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+kde_save_cxxflags="$CXXFLAGS"
+CXXFLAGS="$CXXFLAGS $MICO_INCLUDES"
+AC_TRY_COMPILE(
+[
+#include <mico/config.h>
+],
+[
+#ifdef HAVE_MINI_STL
+#error "nothing"
+#endif
+],
+kde_cv_have_mini_stl=no,
+kde_cv_have_mini_stl=yes)
+CXXFLAGS="$kde_save_cxxflags"
+AC_LANG_RESTORE
+])
+
+if test "x$kde_cv_have_mini_stl" = "xyes"; then
+ AC_MSG_RESULT(yes)
+ $1
+else
+ AC_MSG_RESULT(no)
+ $2
+fi
+])
+
+])
+
+
+AC_DEFUN(KDE_CHECK_LIBPTHREAD,
+[
+AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] )
+AC_SUBST(LIBPTHREAD)
+])
+
+AC_DEFUN(KDE_CHECK_PTHREAD_OPTION,
+[
+ AC_ARG_ENABLE(kernel-threads, [ --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only.],
+ kde_use_kernthreads=$enableval, kde_use_kernthreads=no)
+
+ if test "$kde_use_kernthreads" = "yes"; then
+ ac_save_CXXFLAGS="$CXXFLAGS"
+ ac_save_CFLAGS="$CXXFLAGS"
+ CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS"
+ CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS"
+ AC_CHECK_HEADERS(pthread/linuxthreads/pthread.h)
+ CXXFLAGS="$ac_save_CXXFLAGS"
+ CFLAGS="$ac_save_CFLAGS"
+ if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then
+ kde_use_kernthreads=no
+ else
+ dnl Add proper -I and -l statements
+ AC_CHECK_LIB(lthread, pthread_join, [LIBPTHREAD="-llthread -llgcc_r"]) dnl for FreeBSD
+ if test "x$LIBPTHREAD" = "x"; then
+ kde_use_kernthreads=no
+ else
+ USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads"
+ fi
+ fi
+ else
+ USE_THREADS=""
+ if test -z "$LIBPTHREAD"; then
+ KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-pthread"] )
+ fi
+ fi
+
+ case $host_os in
+ solaris*)
+ KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"])
+ CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS"
+ echo "Setting Solaris pthread compilation options"
+ ;;
+ freebsd*)
+ CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
+ echo "Setting FreeBSD pthread compilation options"
+ ;;
+ aix*)
+ CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
+ LIBPTHREAD="$LIBPTHREAD -lc_r"
+ echo "Setting AIX pthread compilation options"
+ ;;
+ linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT"
+ USE_THREADS="$USE_THREADS -DPIC -fPIC"
+ echo "Setting Linux pthread compilation options"
+ ;;
+ *)
+ ;;
+ esac
+ AC_SUBST(USE_THREADS)
+ AC_SUBST(LIBPTHREAD)
+])
+
+AC_DEFUN(KDE_CHECK_THREADING,
+[
+ AC_REQUIRE([KDE_CHECK_LIBPTHREAD])
+ AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION])
+ dnl default is yes if libpthread is found and no if no libpthread is available
+ if test -z "$LIBPTHREAD"; then
+ kde_check_threading_default=no
+ else
+ kde_check_threading_default=yes
+ fi
+ AC_ARG_ENABLE(threading, [ --disable-threading disables threading even if libpthread found ],
+ kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default)
+
+ if test "x$kde_use_threading" = "xyes"; then
+ AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)])
+ fi
+])
+
+AC_DEFUN(KDE_TRY_LINK_PYTHON,
+[
+if test "$kde_python_link_found" = no; then
+
+if test "$1" = normal; then
+ AC_MSG_CHECKING(if a Python application links)
+else
+ AC_MSG_CHECKING(if Python depends on $2)
+fi
+
+AC_CACHE_VAL(kde_cv_try_link_python_$1,
+[
+AC_LANG_SAVE
+AC_LANG_C
+kde_save_cflags="$CFLAGS"
+CFLAGS="$CFLAGS $PYTHONINC"
+kde_save_libs="$LIBS"
+LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET"
+kde_save_ldflags="$LDFLAGS"
+LDFLAGS="$LDFLAGS $PYTHONLIB"
+
+AC_TRY_LINK(
+[
+#include <Python.h>
+],[
+ PySys_SetArgv(1, 0);
+],
+ [kde_cv_try_link_python_$1=yes],
+ [kde_cv_try_link_python_$1=no]
+)
+CFLAGS="$kde_save_cflags"
+LIBS="$kde_save_libs"
+LDFLAGS="$kde_save_ldflags"
+])
+
+if test "$kde_cv_try_link_python_$1" = "yes"; then
+ AC_MSG_RESULT(yes)
+ kde_python_link_found=yes
+ if test ! "$1" = normal; then
+ LIBPYTHON="$LIBPYTHON $2"
+ fi
+ $3
+else
+ AC_MSG_RESULT(no)
+ $4
+fi
+AC_LANG_RESTORE
+
+fi
+
+])
+
+AC_DEFUN(KDE_CHECK_PYTHON,
+[
+AC_REQUIRE([KDE_CHECK_LIBDL])
+AC_REQUIRE([KDE_CHECK_LIBPTHREAD])
+
+AC_MSG_CHECKING([for Python directory])
+
+AC_CACHE_VAL(kde_cv_pythondir,
+[
+ if test -z "$PYTHONDIR"; then
+ kde_cv_pythondir=/usr/local
+ else
+ kde_cv_pythondir="$PYTHONDIR"
+ fi
+])
+
+AC_ARG_WITH(pythondir,
+[ --with-pythondir=pythondir use python installed in pythondir ],
+[
+ ac_python_dir=$withval
+], ac_python_dir=$kde_cv_pythondir
+)
+
+AC_MSG_RESULT($ac_python_dir)
+
+if test -z "$1"; then
+ version="1.5"
+else
+ version="$1"
+fi
+
+AC_MSG_CHECKING([for Python$version])
+
+python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes"
+AC_FIND_FILE(Python.h, $python_incdirs, python_incdir)
+if test ! -r $python_incdir/Python.h; then
+ AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir)
+ python_incdir=$python_incdir/python$version
+ if test ! -r $python_incdir/Python.h; then
+ AC_MSG_ERROR(Python.h not found.)
+ fi
+fi
+
+PYTHONINC=-I$python_incdir
+
+python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs"
+AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir)
+if test ! -r $python_libdir/libpython$version.a; then
+ AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir)
+ python_libdir=$python_libdir/python$version/config
+ if test ! -r $python_libdir/libpython$version.a; then
+ AC_MSG_ERROR(libpython$version.a not found.)
+ fi
+fi
+
+PYTHONLIB=-L$python_libdir
+if test -z "$LIBPYTHON"; then
+LIBPYTHON=-lpython$version
+fi
+
+python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs"
+AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir)
+python_moddir=$python_moddir/python$version
+if test ! -r $python_moddir/copy.py; then
+ AC_MSG_ERROR(python module directory not found.)
+fi
+
+PYTHONMODDIR=$python_moddir
+
+AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir)
+
+dnl Note: this test is very weak
+kde_python_link_found=no
+KDE_TRY_LINK_PYTHON(normal)
+KDE_TRY_LINK_PYTHON(m, -lm)
+KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD)
+KDE_TRY_LINK_PYTHON(tcl, -ltcl)
+KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm], [],
+ [AC_MSG_WARN([it seems, Python depends on another library.
+ Pleae use \"make LIBPTYHON='-lpython$version -lotherlib'\" to fix this
+ and contact the authors to let them know about this problem])
+ ])
+
+LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET"
+AC_SUBST(PYTHONINC)
+AC_SUBST(PYTHONLIB)
+AC_SUBST(LIBPYTHON)
+AC_SUBST(PYTHONMODDIR)
+
+])
+
+
+AC_DEFUN(KDE_CHECK_STL_SGI,
+[
+ AC_MSG_CHECKING([if STL implementation is SGI like])
+ AC_CACHE_VAL(kde_cv_stl_type_sgi,
+ [
+ AC_TRY_COMPILE([
+#include <string>
+using namespace std;
+],[
+ string astring="Hallo Welt.";
+ astring.erase(0, 6); // now astring is "Welt"
+ return 0;
+], kde_cv_stl_type_sgi=yes,
+ kde_cv_stl_type_sgi=no)
+])
+
+ AC_MSG_RESULT($kde_cv_stl_type_sgi)
+
+ if test "$kde_cv_stl_type_sgi" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI])
+ fi
+])
+
+AC_DEFUN(KDE_CHECK_STL_HP,
+[
+ AC_MSG_CHECKING([if STL implementation is HP like])
+ AC_CACHE_VAL(kde_cv_stl_type_hp,
+ [
+ AC_TRY_COMPILE([
+#include <string>
+using namespace std;
+],[
+ string astring="Hello World";
+ astring.remove(0, 6); // now astring is "World"
+ return 0;
+], kde_cv_stl_type_hp=yes,
+ kde_cv_stl_type_hp=no)
+])
+ AC_MSG_RESULT($kde_cv_stl_type_hp)
+
+ if test "$kde_cv_stl_type_hp" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_HP_STL, 1, [Define if you have a STL implementation by SGI])
+ fi
+])
+
+AC_DEFUN(KDE_CHECK_STL,
+[
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ ac_save_CXXFLAGS="$CXXFLAGS"
+ CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`"
+ KDE_CHECK_STL_SGI
+
+ if test "$kde_cv_stl_type_sgi" = "no"; then
+ KDE_CHECK_STL_HP
+
+ if test "$kde_cv_stl_type_hp" = "no"; then
+ AC_MSG_ERROR("no known STL type found")
+ fi
+ fi
+
+ CXXFLAGS="$ac_save_CXXFLAGS"
+ AC_LANG_RESTORE
+])
+
+AC_DEFUN(AC_FIND_QIMGIO,
+ [AC_REQUIRE([AC_FIND_JPEG])
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+AC_MSG_CHECKING([for qimgio])
+AC_CACHE_VAL(ac_cv_lib_qimgio,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_save_LIBS="$LIBS"
+ac_save_CXXFLAGS="$CXXFLAGS"
+LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT"
+CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
+AC_TRY_RUN(dnl
+[
+#include <qimageio.h>
+#include <qstring.h>
+int main() {
+ QString t = "hallo";
+ t.fill('t');
+ qInitImageIO();
+}
+],
+ ac_cv_lib_qimgio=yes,
+ ac_cv_lib_qimgio=no,
+ ac_cv_lib_qimgio=no)
+LIBS="$ac_save_LIBS"
+CXXFLAGS="$ac_save_CXXFLAGS"
+AC_LANG_RESTORE
+])dnl
+if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then
+ LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG"
+ AC_MSG_RESULT(yes)
+ AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available])
+ AC_SUBST(LIBQIMGIO)
+else
+ AC_MSG_RESULT(not found)
+fi
+])
+
+AC_DEFUN(KDE_CHECK_ANSI,
+[
+])
+
+AC_DEFUN(KDE_CHECK_INSURE,
+[
+ AC_ARG_ENABLE(insure, [ --enable-insure use insure++ for debugging [default=no]],
+ [
+ if test $enableval = "no"; dnl
+ then ac_use_insure="no"
+ else ac_use_insure="yes"
+ fi
+ ], [ac_use_insure="no"])
+
+ AC_MSG_CHECKING(if we will use Insure++ to debug)
+ AC_MSG_RESULT($ac_use_insure)
+ if test "$ac_use_insure" = "yes"; dnl
+ then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "????
+ fi
+])
+
+AC_DEFUN(AM_DISABLE_LIBRARIES,
+[
+ AC_PROVIDE([AM_ENABLE_STATIC])
+ AC_PROVIDE([AM_ENABLE_SHARED])
+ enable_static=no
+ enable_shared=yes
+])
+
+
+AC_DEFUN(AC_CHECK_UTMP_FILE,
+[
+ AC_MSG_CHECKING([for utmp file])
+
+ AC_CACHE_VAL(kde_cv_utmp_file,
+ [
+ kde_cv_utmp_file=no
+
+ for ac_file in \
+ \
+ /var/run/utmp \
+ /var/adm/utmp \
+ /etc/utmp \
+ ; \
+ do
+ if test -r "$ac_file"; then
+ kde_cv_utmp_file=$ac_file
+ break
+ fi
+ done
+ ])
+
+ if test "$kde_cv_utmp_file" != "no"; then
+ AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries])
+ $1
+ AC_MSG_RESULT($kde_cv_utmp_file)
+ else
+ $2
+ AC_MSG_RESULT([non found])
+ fi
+])
+
+
+AC_DEFUN(KDE_CREATE_SUBDIRSLIST,
+[
+
+DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin"
+
+if test ! -s $srcdir/subdirs; then
+ dnl Note: Makefile.common creates subdirs, so this is just a fallback
+ TOPSUBDIRS=""
+ files=`cd $srcdir && ls -1`
+ dirs=`for i in $files; do if test -d $i; then echo $i; fi; done`
+ for i in $dirs; do
+ echo $i >> $srcdir/subdirs
+ done
+fi
+
+if test -s $srcdir/inst-apps; then
+ ac_topsubdirs="`cat $srcdir/inst-apps`"
+else
+ ac_topsubdirs="`cat $srcdir/subdirs`"
+fi
+
+for i in $ac_topsubdirs; do
+ AC_MSG_CHECKING([if $i should be compiled])
+ if test -d $srcdir/$i; then
+ install_it="yes"
+ for j in $DO_NOT_COMPILE; do
+ if test $i = $j; then
+ install_it="no"
+ fi
+ done
+ else
+ install_it="no"
+ fi
+ AC_MSG_RESULT($install_it)
+ if test $install_it = "yes"; then
+ TOPSUBDIRS="$TOPSUBDIRS $i"
+ fi
+done
+
+AC_SUBST(TOPSUBDIRS)
+])
+
+AC_DEFUN(KDE_CHECK_NAMESPACES,
+[
+AC_MSG_CHECKING(whether C++ compiler supports namespaces)
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+AC_TRY_COMPILE([
+],
+[
+namespace Foo {
+ extern int i;
+ namespace Bar {
+ extern int i;
+ }
+}
+
+int Foo::i = 0;
+int Foo::Bar::i = 1;
+],[
+ AC_MSG_RESULT(yes)
+ AC_DEFINE(HAVE_NAMESPACES)
+], [
+AC_MSG_RESULT(no)
+])
+AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_CHECK_NEWLIBS,
+[
+
+])
+
+dnl ------------------------------------------------------------------------
+dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure at kde.org
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_CHECK_S_ISSOCK,
+[
+AC_MSG_CHECKING(for S_ISSOCK)
+AC_CACHE_VAL(ac_cv_have_s_issock,
+[
+AC_LANG_SAVE
+AC_LANG_C
+AC_TRY_LINK(
+[
+#include <sys/stat.h>
+],
+[
+struct stat buff;
+int b = S_ISSOCK( buff.st_mode );
+],
+ac_cv_have_s_issock=yes,
+ac_cv_have_s_issock=no)
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_have_s_issock)
+if test "$ac_cv_have_s_issock" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.])
+fi
+])
+
+dnl ------------------------------------------------------------------------
+dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure at kde.org
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_CHECK_KDEMAXPATHLEN,
+[
+AC_MSG_CHECKING(for MAXPATHLEN)
+AC_CACHE_VAL(ac_cv_maxpathlen,
+[
+AC_LANG_C
+cat > conftest.$ac_ext <<EOF
+#include <stdio.h>
+#include <sys/param.h>
+#ifndef MAXPATHLEN
+#define MAXPATHLEN 1024
+#endif
+
+KDE_HELLO MAXPATHLEN
+
+EOF
+
+ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out"
+
+if AC_TRY_EVAL(ac_try) && test -s conftest.out; then
+ ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out`
+else
+ ac_cv_maxpathlen=1024
+fi
+
+rm conftest.*
+
+])
+AC_MSG_RESULT($ac_cv_maxpathlen)
+AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] )
+])
+
+dnl -------------------------------------------------------------------------
+dnl See if the compiler supports a template repository bero at redhat.de
+dnl -------------------------------------------------------------------------
+AC_DEFUN(KDE_COMPILER_REPO,
+[
+ REPO=""
+ NOREPO=""
+
+ KDE_CHECK_COMPILER_FLAG(frepo,
+ [
+ REPO="-frepo"
+ NOREPO="-fno-repo"
+ ])
+
+ if test -z "$REPO"; then
+ KDE_CHECK_COMPILER_FLAG(instances=explicit,
+ [
+ REPO="-instances=explicit"
+ NOREPO="-instances=extern"
+ ])
+ fi
+
+ if test -n "$REPO"; then
+ AC_DEFINE_UNQUOTED(HAVE_TEMPLATE_REPOSITORY, 1,
+ [C++ compiler supports template repository])
+ $1
+ fi
+
+ AC_SUBST(REPO)
+ AC_SUBST(NOREPO)
+])
+
+AC_DEFUN(KDE_CHECK_HEADER,
+[
+ AC_LANG_SAVE
+ kde_safe_cppflags=$CPPFLAGS
+ CPPFLAGS="$CPPFLAGS $all_includes"
+ AC_LANG_CPLUSPLUS
+ AC_CHECK_HEADER($1, $2, $3)
+ CPPFLAGS=$kde_safe_cppflags
+ AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_CHECK_QWSPRITEFIELD,
+[
+ KDE_CHECK_HEADER(QwSpriteField.h, ,
+ [
+ AC_MSG_WARN([you don't have QwSpriteField.h somewhere. Please install
+ QwSpriteField out of kdesupport.])
+ $1
+ ])
+])
+
+AC_DEFUN(KDE_FAST_CONFIGURE,
+[
+ dnl makes configure fast (needs perl)
+ AC_ARG_ENABLE(fast-perl, [ --disable-fast-perl disable fast Makefile generation (needs perl)],
+ with_fast_perl=$enableval, with_fast_perl=yes)
+])
+
+AC_DEFUN(KDE_CONF_FILES,
+[
+ val=
+ if test -f $srcdir/configure.files ; then
+ val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files`
+ fi
+ CONF_FILES=
+ if test -n "$val" ; then
+ for i in $val ; do
+ CONF_FILES="$CONF_FILES $i"
+ done
+ fi
+ AC_SUBST(CONF_FILES)
+])dnl
+
+AC_DEFUN(KDE_SET_PREFIX,
+[
+ unset CDPATH
+ dnl make $KDEDIR the default for the installation
+ AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde})
+
+ if test "x$prefix" = "xNONE"; then
+ prefix=$ac_default_prefix
+ ac_configure_args="$ac_configure_args --prefix $prefix"
+ fi
+ KDE_FAST_CONFIGURE
+ KDE_CONF_FILES
+])
+
+pushdef([AC_PROG_INSTALL],
+[
+ dnl our own version, testing for a -p flag
+ popdef([AC_PROG_INSTALL])
+ dnl as AC_PROG_INSTALL works as it works we first have
+ dnl to save if the user didn't specify INSTALL, as the
+ dnl autoconf one overwrites INSTALL and we have no chance to find
+ dnl out afterwards
+ test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL
+ test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM
+ test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT
+ AC_PROG_INSTALL
+
+ if test -z "$kde_save_INSTALL_given" ; then
+ # OK, user hasn't given any INSTALL, autoconf found one for us
+ # now we test, if it supports the -p flag
+ AC_MSG_CHECKING(for -p flag to install)
+ rm -f confinst.$$.* > /dev/null 2>&1
+ echo "Testtest" > confinst.$$.orig
+ ac_res=no
+ if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then
+ if test -f confinst.$$.new ; then
+ # OK, -p seems to do no harm to install
+ INSTALL="${INSTALL} -p"
+ ac_res=yes
+ fi
+ fi
+ rm -f confinst.$$.*
+ AC_MSG_RESULT($ac_res)
+ fi
+ dnl the following tries to resolve some signs and wonders coming up
+ dnl with different autoconf/automake versions
+ dnl e.g.:
+ dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s
+ dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS)
+ dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s
+ dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has
+ dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the
+ dnl install- at DIR@PROGRAMS targets to explicitly use that flag
+ dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as
+ dnl INSTALL_SCRIPT, which breaks with automake <= 1.4
+ dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure
+ dnl *sometimes KDE does not use the install- at DIR@PROGRAM targets from
+ dnl automake (due to broken Makefile.am or whatever) to install programs,
+ dnl and so does not see the -s flag in automake > 1.4
+ dnl to clean up that mess we:
+ dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG
+ dnl which cleans KDE's program with automake > 1.4;
+ dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems
+ dnl with automake<=1.4
+ dnl note that dues to this sometimes two '-s' flags are used (if KDE
+ dnl properly uses install- at DIR@PROGRAMS, but I don't care
+ dnl
+ dnl And to all this comes, that I even can't write in comments variable
+ dnl names used by automake, because it is so stupid to think I wanted to
+ dnl _use_ them, therefor I have written A_M_... instead of AM_
+ dnl hmm, I wanted to say something ... ahh yes: Arghhh.
+
+ if test -z "$kde_save_INSTALL_PROGRAM_given" ; then
+ INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)'
+ fi
+ if test -z "$kde_save_INSTALL_SCRIPT_given" ; then
+ INSTALL_SCRIPT='${INSTALL}'
+ fi
+])dnl
+
+AC_DEFUN(KDE_LANG_CPLUSPLUS,
+[AC_LANG_CPLUSPLUS
+ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC'
+pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS])
+])
+
+pushdef([AC_LANG_CPLUSPLUS],
+[popdef([AC_LANG_CPLUSPLUS])
+KDE_LANG_CPLUSPLUS
+])
+
+AC_DEFUN(KDE_CHECK_LONG_LONG,
+[
+AC_MSG_CHECKING(for long long)
+AC_CACHE_VAL(kde_cv_c_long_long,
+[
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_LINK([], [
+ long long foo = 0;
+ foo = foo+1;
+ ],
+ kde_cv_c_long_long=yes, kde_cv_c_long_long=no)
+])
+AC_MSG_RESULT($kde_cv_c_long_long)
+if test "$kde_cv_c_long_long" = yes; then
+ AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype])
+fi
+])
+
+## libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
+## Copyright 1996, 1997, 1998, 1999, 2000, 2001
+## Free Software Foundation, Inc.
+## Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful, but
+## WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+##
+## As a special exception to the GNU General Public License, if you
+## distribute this file as part of a program that contains a
+## configuration script generated by Autoconf, you may include it under
+## the same distribution terms that you use for the rest of that program.
+
+# serial 46 AC_PROG_LIBTOOL
+AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
+ AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [AC_LIBTOOL_CXX],
+ [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
+])])
+
+dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
+dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
+ AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [AC_LIBTOOL_GCJ],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [AC_LIBTOOL_GCJ],
+ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
+ [AC_LIBTOOL_GCJ],
+ [ifdef([AC_PROG_GCJ],
+ [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
+])])
+ ifdef([A][M_PROG_GCJ],
+ [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
+])])
+ ifdef([LT_AC_PROG_GCJ],
+ [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
+])])])])])])
+
+AC_DEFUN([_AC_PROG_LIBTOOL],
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+
+# Save cache, so that ltconfig can load it
+AC_CACHE_SAVE
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Reload cache, that may have been modified by ltconfig
+AC_CACHE_LOAD
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+AC_DEFUN([AC_LIBTOOL_SETUP],
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+AC_REQUIRE([AC_OBJEXT])dnl
+AC_REQUIRE([AC_EXEEXT])dnl
+dnl
+
+# Only perform the check for file, if the check method requires it
+case "$deplibs_check_method" in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ AC_PATH_MAGIC
+ fi
+ ;;
+esac
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+AC_ARG_WITH(pic,
+ [ --with-pic try to use only PIC/non-PIC objects [default=use both]],
+ pic_mode="$withval", pic_mode=default)
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$host" in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case "`/usr/bin/file conftest.$ac_objext`" in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_SAVE
+ AC_LANG_C
+ AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_RESTORE])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+
+ # recent cygwin and mingw systems supply a stub DllMain which the user
+ # can override, but on older systems we have to supply one
+ AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
+ [AC_TRY_LINK([],
+ [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
+ DllMain (0, 0, 0);],
+ [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
+
+ case "$host/$CC" in
+ *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
+ # old mingw systems require "-dll" to link a DLL, while more recent ones
+ # require "-mdll"
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -mdll"
+ AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
+ [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
+ CFLAGS="$SAVE_CFLAGS" ;;
+ *-*-cygwin* | *-*-pw32*)
+ # cygwin systems need to pass --dll to the linker, and not link
+ # crt.o which will require a WinMain at 16 definition.
+ lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
+ esac
+ ;;
+ ])
+esac
+])
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_LIBTOOL_PICMODE - implement the --with-pic flag
+# Usage: AC_LIBTOOL_PICMODE[(MODE)]
+# Where MODE is either `yes' or `no'. If omitted, it defaults to
+# `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)])
+
+
+# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case "$MAGIC_CMD" in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="ifelse([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$1; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -n "$file_magic_test_file"; then
+ case "$deplibs_check_method" in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool at gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+])
+
+
+# AC_PATH_MAGIC - find a file program which can recognise a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
+AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
+ else
+ MAGIC_CMD=:
+ fi
+fi
+])
+
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case "$ac_prog" in
+ # Accept absolute paths.
+changequote(,)dnl
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+changequote([,])dnl
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])
+
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ lt_cv_prog_gnu_ld=yes
+else
+ lt_cv_prog_gnu_ld=no
+fi])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])
+
+# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
+[lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+])
+
+# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognise dependant libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case "$host_os" in
+aix4*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi4*)
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ changequote([, ])dnl
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin* | mingw* |pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
+ ;;
+
+freebsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case "$host_cpu" in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+ changequote([, ])dnl
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20*|hpux11*)
+ # TODO: Does this work for hpux-11 too?
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ changequote([, ])dnl
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+
+irix5* | irix6*)
+ case "$host_os" in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case "$LD" in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ changequote(,)dnl
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ changequote([, ])dnl
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ case "$host_cpu" in
+ alpha* | i*86 | powerpc* | sparc* | ia64* | s390* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ changequote([, ])dnl
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ [lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library']
+ else
+ [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object']
+ fi
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+
+openbsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case "$host_cpu" in
+ i*86 )
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library'
+ changequote([, ])dnl
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+newsos6)
+ [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case "$host_vendor" in
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ motorola)
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ changequote([, ])dnl
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ esac
+ ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+])
+
+
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ else
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+AC_MSG_RESULT([$NM])
+])
+
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case "$host" in
+*-*-beos* | *-*-cygwin* | *-*-pw32*)
+ # These system don't have libm
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
+ ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-convenience to the
+# configure arguments. Note that LIBLTDL and INCLTDL are not
+# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
+# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
+# with '${top_builddir}/' and INCLTDL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!). If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ case "$enable_ltdl_convenience" in
+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+ "") enable_ltdl_convenience=yes
+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+ esac
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+ INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-install to the configure
+# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
+# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
+# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
+# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
+# with '${top_srcdir}/' (note the single quotes!). If your package is
+# not flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
+ ])
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+ INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
+ fi
+])
+
+# If this macro is not defined by Autoconf, define it here.
+ifdef([AC_PROVIDE_IFELSE],
+ [],
+ [define([AC_PROVIDE_IFELSE],
+ [ifdef([AC_PROVIDE_$1],
+ [$2], [$3])])])
+
+# AC_LIBTOOL_CXX - enable support for C++ libraries
+AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
+
+AC_DEFUN([_AC_LIBTOOL_CXX],
+[AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([AC_PROG_CXXCPP])
+LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
+lt_save_CC="$CC"
+lt_save_CFLAGS="$CFLAGS"
+dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
+dnl is set to the C++ compiler.
+AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" \
+file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
+--build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
+|| AC_MSG_ERROR([libtool tag configuration failed])
+CC="$lt_save_CC"
+CFLAGS="$lt_save_CFLAGS"
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+# AC_LIBTOOL_GCJ - enable support for GCJ libraries
+AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
+
+AC_DEFUN([_AC_LIBTOOL_GCJ],
+[AC_REQUIRE([AC_PROG_LIBTOOL])
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
+ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
+ [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
+ [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
+ [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
+LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
+lt_save_CC="$CC"
+lt_save_CFLAGS="$CFLAGS"
+dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
+dnl is set to the C++ compiler.
+AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" \
+file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
+--build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
+|| AC_MSG_ERROR([libtool tag configuration failed])
+CC="$lt_save_CC"
+CFLAGS="$lt_save_CFLAGS"
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+dnl old names
+AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
+AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
+AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
+
+AC_DEFUN([LT_AC_PROG_GCJ],
+[AC_CHECK_TOOL(GCJ, gcj, no)
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)
+])
Added: kde-extras/kfocus/branches/upstream/current/aclocal.m4
===================================================================
--- kde-extras/kfocus/branches/upstream/current/aclocal.m4 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/aclocal.m4 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,5007 @@
+dnl aclocal.m4 generated automatically by aclocal 1.4
+
+dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+
+
+dnl This file is part of the KDE libraries/packages
+dnl Copyright (C) 1997 Janos Farkas (chexum at shadow.banki.hu)
+dnl (C) 1997,98,99 Stephan Kulow (coolo at kde.org)
+
+dnl This file is free software; you can redistribute it and/or
+dnl modify it under the terms of the GNU Library General Public
+dnl License as published by the Free Software Foundation; either
+dnl version 2 of the License, or (at your option) any later version.
+
+dnl This library is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+dnl Library General Public License for more details.
+
+dnl You should have received a copy of the GNU Library General Public License
+dnl along with this library; see the file COPYING.LIB. If not, write to
+dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+dnl Boston, MA 02111-1307, USA.
+
+dnl IMPORTANT NOTE:
+dnl Please do not modify this file unless you expect your modifications to be
+dnl carried into every other module in the repository. If you decide that you
+dnl really want to modify it, contact coolo at kde.org mentioning that you have
+dnl and that the modified file should be committed to every module.
+dnl
+dnl Single-module modifications are best placed in configure.in for kdelibs
+dnl and kdebase or configure.in.in if present.
+
+
+dnl ------------------------------------------------------------------------
+dnl Find a file (or one of more files in a list of dirs)
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_FIND_FILE,
+[
+$3=NO
+for i in $2;
+do
+ for j in $1;
+ do
+ if test -r "$i/$j"; then
+ $3=$i
+ break 2
+ fi
+ done
+done
+])
+
+dnl KDE_FIND_PATH(programm-name, variable-name, list of directories,
+dnl if-not-found, test-parameter)
+AC_DEFUN(KDE_FIND_PATH,
+[
+ AC_MSG_CHECKING([for $1])
+ if test -n "$$2"; then
+ kde_cv_path="$$2";
+ else
+ kde_cache=`echo $1 | sed 'y%./+-%__p_%'`
+
+ AC_CACHE_VAL(kde_cv_path_$kde_cache,
+ [
+ kde_cv_path="NONE"
+ dirs="$3"
+ kde_save_IFS=$IFS
+ IFS=':'
+ for dir in $PATH; do
+ dirs="$dirs $dir"
+ done
+ IFS=$kde_save_IFS
+
+ for dir in $dirs; do
+ if test -x "$dir/$1"; then
+ if test -n "$5"
+ then
+ evalstr="$dir/$1 $5 2>&1 "
+ if eval $evalstr; then
+ kde_cv_path="$dir/$1"
+ break
+ fi
+ else
+ kde_cv_path="$dir/$1"
+ break
+ fi
+ fi
+ done
+
+ eval "kde_cv_path_$kde_cache=$kde_cv_path"
+
+ ])
+
+ eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
+
+ fi
+
+ if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
+ AC_MSG_RESULT(not found)
+ $4
+ else
+ AC_MSG_RESULT($kde_cv_path)
+ $2=$kde_cv_path
+
+ fi
+])
+
+AC_DEFUN(KDE_MOC_ERROR_MESSAGE,
+[
+ AC_MSG_ERROR([No Qt meta object compiler (moc) found!
+Please check whether you installed Qt correctly.
+You need to have a running moc binary.
+configure tried to run $ac_cv_path_moc and the test didn't
+succeed. If configure shouldn't have tried this one, set
+the environment variable MOC to the right one before running
+configure.
+])
+])
+
+AC_DEFUN(KDE_UIC_ERROR_MESSAGE,
+[
+ AC_MSG_WARN([No Qt ui compiler (uic) found!
+Please check whether you installed Qt correctly.
+You need to have a running uic binary.
+configure tried to run $ac_cv_path_uic and the test didn't
+succeed. If configure shouldn't have tried this one, set
+the environment variable UIC to the right one before running
+configure.
+])
+])
+
+dnl ------------------------------------------------------------------------
+dnl Find the meta object compiler and the ui compiler in the PATH,
+dnl in $QTDIR/bin, and some more usual places
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_PATH_QT_MOC_UIC,
+[
+ qt_bindirs=""
+ for dir in $kde_qt_dirs; do
+ qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc"
+ done
+ qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin"
+ if test ! "$ac_qt_bindir" = "NO"; then
+ qt_bindirs="$ac_qt_bindir $qt_bindirs"
+ fi
+
+ KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE])
+ KDE_FIND_PATH(uic, UIC, [$qt_bindirs], [UIC="" ; KDE_UIC_ERROR_MESSAGE])
+ if test -z "$UIC" ; then
+ if test -z "$UIC_NOT_NEEDED" ; then
+ exit 1
+ else
+ UIC="echo uic not available: "
+ fi
+ fi
+ AC_SUBST(MOC)
+ AC_SUBST(UIC)
+])
+
+AC_DEFUN(KDE_1_CHECK_PATHS,
+[
+ KDE_1_CHECK_PATH_HEADERS
+
+ KDE_TEST_RPATH=
+
+ if test -n "$USE_RPATH"; then
+
+ if test -n "$kde_libraries"; then
+ KDE_TEST_RPATH="-R $kde_libraries"
+ fi
+
+ if test -n "$qt_libraries"; then
+ KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries"
+ fi
+
+ if test -n "$x_libraries"; then
+ KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries"
+ fi
+
+ KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH"
+ fi
+
+AC_MSG_CHECKING([for KDE libraries installed])
+ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5'
+
+if AC_TRY_EVAL(ac_link) && test -s conftest; then
+ AC_MSG_RESULT(yes)
+else
+ AC_MSG_ERROR([your system fails at linking a small KDE application!
+Check, if your compiler is installed correctly and if you have used the
+same compiler to compile Qt and kdelibs as you did use now.
+For more details about this problem, look at the end of config.log.])
+fi
+
+if eval `KDEDIR= ./conftest 2>&5`; then
+ kde_result=done
+else
+ kde_result=problems
+fi
+
+KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
+kde_have_all_paths=yes
+
+KDE_SET_PATHS($kde_result)
+
+])
+
+AC_DEFUN(KDE_SET_PATHS,
+[
+ kde_cv_all_paths="kde_have_all_paths=\"yes\" \
+ kde_htmldir=\"$kde_htmldir\" \
+ kde_appsdir=\"$kde_appsdir\" \
+ kde_icondir=\"$kde_icondir\" \
+ kde_sounddir=\"$kde_sounddir\" \
+ kde_datadir=\"$kde_datadir\" \
+ kde_locale=\"$kde_locale\" \
+ kde_cgidir=\"$kde_cgidir\" \
+ kde_confdir=\"$kde_confdir\" \
+ kde_mimedir=\"$kde_mimedir\" \
+ kde_toolbardir=\"$kde_toolbardir\" \
+ kde_wallpaperdir=\"$kde_wallpaperdir\" \
+ kde_templatesdir=\"$kde_templatesdir\" \
+ kde_bindir=\"$kde_bindir\" \
+ kde_servicesdir=\"$kde_servicesdir\" \
+ kde_servicetypesdir=\"$kde_servicetypesdir\" \
+ kde_moduledir=\"$kde_moduledir\" \
+ kde_result=$1"
+])
+
+AC_DEFUN(KDE_SET_DEFAULT_PATHS,
+[
+if test "$1" = "default"; then
+
+ if test -z "$kde_htmldir"; then
+ kde_htmldir='\${prefix}/share/doc/HTML'
+ fi
+ if test -z "$kde_appsdir"; then
+ kde_appsdir='\${prefix}/share/applnk'
+ fi
+ if test -z "$kde_icondir"; then
+ kde_icondir='\${prefix}/share/icons'
+ fi
+ if test -z "$kde_sounddir"; then
+ kde_sounddir='\${prefix}/share/sounds'
+ fi
+ if test -z "$kde_datadir"; then
+ kde_datadir='\${prefix}/share/apps'
+ fi
+ if test -z "$kde_locale"; then
+ kde_locale='\${prefix}/share/locale'
+ fi
+ if test -z "$kde_cgidir"; then
+ kde_cgidir='\${exec_prefix}/cgi-bin'
+ fi
+ if test -z "$kde_confdir"; then
+ kde_confdir='\${prefix}/share/config'
+ fi
+ if test -z "$kde_mimedir"; then
+ kde_mimedir='\${prefix}/share/mimelnk'
+ fi
+ if test -z "$kde_toolbardir"; then
+ kde_toolbardir='\${prefix}/share/toolbar'
+ fi
+ if test -z "$kde_wallpaperdir"; then
+ kde_wallpaperdir='\${prefix}/share/wallpapers'
+ fi
+ if test -z "$kde_templatesdir"; then
+ kde_templatesdir='\${prefix}/share/templates'
+ fi
+ if test -z "$kde_bindir"; then
+ kde_bindir='\${exec_prefix}/bin'
+ fi
+ if test -z "$kde_servicesdir"; then
+ kde_servicesdir='\${prefix}/share/services'
+ fi
+ if test -z "$kde_servicetypesdir"; then
+ kde_servicetypesdir='\${prefix}/share/servicetypes'
+ fi
+ if test -z "$kde_moduledir"; then
+ kde_moduledir='\${prefix}/lib/kde2'
+ fi
+
+ KDE_SET_PATHS(defaults)
+
+else
+
+ if test $kde_qtver = 1; then
+ AC_MSG_RESULT([compiling])
+ KDE_1_CHECK_PATHS
+ else
+ AC_MSG_ERROR([path checking not yet supported for KDE 2])
+ fi
+
+fi
+])
+
+AC_DEFUN(KDE_CHECK_PATHS_FOR_COMPLETENESS,
+[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" ||
+ test -z "$kde_icondir" || test -z "$kde_sounddir" ||
+ test -z "$kde_datadir" || test -z "$kde_locale" ||
+ test -z "$kde_cgidir" || test -z "$kde_confdir" ||
+ test -z "$kde_mimedir" || test -z "$kde_toolbardir" ||
+ test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" ||
+ test -z "$kde_bindir" || test -z "$kde_servicesdir" ||
+ test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" ||
+ test "$kde_have_all_paths" != "yes"; then
+ kde_have_all_paths=no
+ fi
+])
+
+AC_DEFUN(KDE_MISSING_PROG_ERROR,
+[
+ AC_MSG_ERROR([The important program $1 was not found!
+Please check whether you installed KDE correctly.
+])
+])
+
+AC_DEFUN(KDE_SUBST_PROGRAMS,
+[AC_REQUIRE([AC_CREATE_KFSSTND])dnl
+
+ kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde2/bin /usr/kde/bin /usr/local/kde/bin"
+ if test -n "$KDEDIRS"; then
+ kde_save_IFS=$IFS
+ IFS=:
+ for dir in $KDEDIRS; do
+ kde_default_bindirs="$dir/bin $kde_default_bindirs "
+ done
+ IFS=$kde_save_IFS
+ fi
+ kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs"
+ KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)])
+ KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)])
+ KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(mcopidl)])
+ KDE_FIND_PATH(kdb2html, KDB2HTML, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kdb2html)])
+ KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(artsc-config)])
+ KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)])
+
+ DCOP_DEPENDENCIES='$(DCOPIDL)'
+ AC_SUBST(DCOPIDL)
+ AC_SUBST(DCOPIDL2CPP)
+ AC_SUBST(DCOP_DEPENDENCIES)
+ AC_SUBST(MCOPIDL)
+ AC_SUBST(KDB2HTML)
+ AC_SUBST(ARTSCCONFIG)
+ AC_SUBST(KDECONFIG)
+
+ if test -x "$KDECONFIG"; then # it can be "compiled"
+ kde_libs_prefix=`$KDECONFIG --prefix`
+ if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then
+ AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs.
+ This means it has been moved since you installed it.
+ This won't work. Please recompile kdelibs for the new prefix.
+ ])
+ fi
+ kde_libs_htmldir=`$KDECONFIG --install html --expandvars`
+ else
+ kde_libs_prefix='$(prefix)'
+ kde_libs_htmldir='$(kde_htmldir)'
+ fi
+ AC_SUBST(kde_libs_prefix)
+ AC_SUBST(kde_libs_htmldir)
+])dnl
+
+AC_DEFUN(AC_CREATE_KFSSTND,
+[
+AC_REQUIRE([AC_CHECK_RPATH])
+
+AC_MSG_CHECKING([for KDE paths])
+kde_result=""
+kde_cached_paths=yes
+AC_CACHE_VAL(kde_cv_all_paths,
+[
+ KDE_SET_DEFAULT_PATHS($1)
+ kde_cached_paths=no
+])
+eval "$kde_cv_all_paths"
+KDE_CHECK_PATHS_FOR_COMPLETENESS
+if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then
+ # wrong values were cached, may be, we can set better ones
+ kde_result=
+ kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir=
+ kde_datadir= kde_locale= kde_cgidir= kde_confdir=
+ kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir=
+ kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir=
+ kde_have_all_paths=
+ KDE_SET_DEFAULT_PATHS($1)
+ eval "$kde_cv_all_paths"
+ KDE_CHECK_PATHS_FOR_COMPLETENESS
+ kde_result="$kde_result (cache overridden)"
+fi
+if test "$kde_have_all_paths" = "no"; then
+ AC_MSG_ERROR([configure could not run a little KDE program to test the environment.
+Since it had compiled and linked before, it must be a strange problem on your system.
+Look at config.log for details. If you are not able to fix this, look at
+http://www.kde.org/faq/installation.html or any www.kde.org mirror.
+(If you're using an egcs version on Linux, you may update binutils!)
+])
+else
+ rm -f conftest*
+ AC_MSG_RESULT($kde_result)
+fi
+
+bindir=$kde_bindir
+
+KDE_SUBST_PROGRAMS
+
+])
+
+AC_DEFUN(AC_SUBST_KFSSTND,
+[
+AC_SUBST(kde_htmldir)
+AC_SUBST(kde_appsdir)
+AC_SUBST(kde_icondir)
+AC_SUBST(kde_sounddir)
+AC_SUBST(kde_datadir)
+AC_SUBST(kde_locale)
+AC_SUBST(kde_confdir)
+AC_SUBST(kde_mimedir)
+AC_SUBST(kde_wallpaperdir)
+AC_SUBST(kde_bindir)
+dnl for KDE 2
+AC_SUBST(kde_templatesdir)
+AC_SUBST(kde_servicesdir)
+AC_SUBST(kde_servicetypesdir)
+AC_SUBST(kde_moduledir)
+if test "$kde_qtver" = 1; then
+ kde_minidir="$kde_icondir/mini"
+else
+# for KDE 1 - this breaks KDE2 apps using minidir, but
+# that's the plan ;-/
+ kde_minidir="/dev/null"
+fi
+dnl AC_SUBST(kde_minidir)
+dnl AC_SUBST(kde_cgidir)
+dnl AC_SUBST(kde_toolbardir)
+])
+
+AC_DEFUN(KDE_MISC_TESTS,
+[
+ AC_LANG_C
+ dnl Checks for libraries.
+ AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for FreeBSD
+ AC_SUBST(LIBCOMPAT)
+ kde_have_crypt=
+ AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes],
+ AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [
+ AC_MSG_WARN([you have no crypt in either libcrypt or libc.
+You should install libcrypt from another source or configure with PAM
+support])
+ kde_have_crypt=no
+ ]))
+ AC_SUBST(LIBCRYPT)
+ if test $kde_have_crypt = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function])
+ fi
+ AC_CHECK_KSIZE_T
+ AC_LANG_C
+ AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"])
+ if test $ac_cv_lib_dnet_dnet_ntoa = no; then
+ AC_CHECK_LIB(dnet_stub, dnet_ntoa,
+ [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"])
+ fi
+ AC_CHECK_FUNC(inet_ntoa)
+ if test $ac_cv_func_inet_ntoa = no; then
+ AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl")
+ fi
+ AC_CHECK_FUNC(connect)
+ if test $ac_cv_func_connect = no; then
+ AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", ,
+ $X_EXTRA_LIBS)
+ fi
+
+ AC_CHECK_FUNC(remove)
+ if test $ac_cv_func_remove = no; then
+ AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix")
+ fi
+
+ # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
+ AC_CHECK_FUNC(shmat, ,
+ AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"))
+
+ # Solaris 2.6 needs -lresolv for res_init
+ AC_CHECK_FUNC(res_init, ,
+ AC_CHECK_LIB(resolv, res_init, X_EXTRA_LIBS="$X_EXTRA_LIBS -lresolv"))
+
+ LIBSOCKET="$X_EXTRA_LIBS"
+ AC_SUBST(LIBSOCKET)
+ AC_SUBST(X_EXTRA_LIBS)
+ AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4
+ AC_SUBST(LIBUCB)
+
+ case $host in dnl this *is* LynxOS specific
+ *-*-lynxos* )
+ AC_MSG_CHECKING([LynxOS header file wrappers])
+ [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"]
+ AC_MSG_RESULT(disabled)
+ AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS
+ ;;
+ esac
+
+ KDE_CHECK_TYPES
+ KDE_CHECK_LIBDL
+])
+
+dnl ------------------------------------------------------------------------
+dnl Find the header files and libraries for X-Windows. Extended the
+dnl macro AC_PATH_X
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(K_PATH_X,
+[
+AC_REQUIRE([AC_PROG_CPP])dnl
+AC_REQUIRE([KDE_MISC_TESTS])dnl
+AC_MSG_CHECKING(for X)
+AC_LANG_SAVE
+AC_LANG_C
+AC_CACHE_VAL(kde_cv_have_x,
+[# One or both of the vars are not set, and there is no cached value.
+if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then
+ kde_x_includes=NO
+else
+ kde_x_includes=$x_includes
+fi
+if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then
+ kde_x_libraries=NO
+else
+ kde_x_libraries=$x_libraries
+fi
+
+# below we use the standard autoconf calls
+ac_x_libraries=$kde_x_libraries
+ac_x_includes=$kde_x_includes
+
+AC_PATH_X_DIRECT
+dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries.
+dnl Unfortunately, if compiling with the N32 ABI, this is not the correct
+dnl location. The correct location is /usr/lib32 or an undefined value
+dnl (the linker is smart enough to pick the correct default library).
+dnl Things work just fine if you use just AC_PATH_X_DIRECT.
+case "$host" in
+mips-sgi-irix6*)
+ ;;
+*)
+ AC_PATH_X_XMKMF
+ if test -z "$ac_x_includes"; then
+ ac_x_includes="."
+ fi
+ if test -z "$ac_x_libraries"; then
+ ac_x_libraries="/usr/lib"
+ fi
+esac
+#from now on we use our own again
+
+# when the user already gave --x-includes, we ignore
+# what the standard autoconf macros told us.
+if test "$kde_x_includes" = NO; then
+ kde_x_includes=$ac_x_includes
+fi
+
+# for --x-libraries too
+if test "$kde_x_libraries" = NO; then
+ kde_x_libraries=$ac_x_libraries
+fi
+
+if test "$kde_x_includes" = NO; then
+ AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!])
+fi
+
+if test "$kde_x_libraries" = NO; then
+ AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!])
+fi
+
+# Record where we found X for the cache.
+kde_cv_have_x="have_x=yes \
+ kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries"
+])dnl
+eval "$kde_cv_have_x"
+
+if test "$have_x" != yes; then
+ AC_MSG_RESULT($have_x)
+ no_x=yes
+else
+ AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes])
+fi
+
+if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then
+ X_INCLUDES=""
+ x_includes="."; dnl better than nothing :-
+ else
+ x_includes=$kde_x_includes
+ X_INCLUDES="-I$x_includes"
+fi
+
+if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then
+ X_LDFLAGS=""
+ x_libraries="/usr/lib"; dnl better than nothing :-
+ else
+ x_libraries=$kde_x_libraries
+ X_LDFLAGS="-L$x_libraries"
+fi
+all_includes="$X_INCLUDES"
+all_libraries="$X_LDFLAGS"
+
+AC_SUBST(X_INCLUDES)
+AC_SUBST(X_LDFLAGS)
+AC_SUBST(x_libraries)
+AC_SUBST(x_includes)
+
+# Check for libraries that X11R6 Xt/Xaw programs need.
+ac_save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS $X_LDFLAGS"
+# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
+# check for ICE first), but we must link in the order -lSM -lICE or
+# we get undefined symbols. So assume we have SM if we have ICE.
+# These have to be linked with before -lX11, unlike the other
+# libraries we check for below, so use a different variable.
+# --interran at uluru.Stanford.EDU, kb at cs.umb.edu.
+AC_CHECK_LIB(ICE, IceConnectionNumber,
+ [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS)
+AC_SUBST(LIBSM)
+LDFLAGS="$ac_save_LDFLAGS"
+
+AC_SUBST(X_PRE_LIBS)
+
+LIB_X11='-lX11 $(LIBSOCKET)'
+AC_SUBST(LIB_X11)
+
+AC_MSG_CHECKING(for libXext)
+AC_CACHE_VAL(kde_cv_have_libXext,
+[
+kde_ldflags_safe="$LDFLAGS"
+kde_libs_safe="$LIBS"
+
+LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS"
+LIBS="-lXext -lX11 $LIBSOCKET"
+
+AC_TRY_LINK([
+#include <stdio.h>
+],
+[
+printf("hello Xext\n");
+],
+kde_cv_have_libXext=yes,
+kde_cv_have_libXext=no
+ )
+
+LDFLAGS=$kde_ldflags_safe
+LIBS=$kde_libs_safe
+ ])
+
+AC_MSG_RESULT($kde_cv_have_libXext)
+
+if test "$kde_cv_have_libXext" = "no"; then
+ AC_MSG_ERROR([We need a working libXext to proceed. Since configure
+can't find it itself, we stop here assuming that make wouldn't find
+them either.])
+fi
+
+])
+
+AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_PRINT_QT_PROGRAM,
+[
+AC_REQUIRE([KDE_USE_QT])
+cat > conftest.$ac_ext <<EOF
+#include "confdefs.h"
+#include <qglobal.h>
+#include <qapplication.h>
+#include <qapp.h>
+#include <qobjcoll.h>
+EOF
+if test "$kde_qtver" = "2"; then
+cat >> conftest.$ac_ext <<EOF
+#include <qevent.h>
+#include <qstring.h>
+#include <qstyle.h>
+EOF
+
+if test $kde_qtsubver -gt 0; then
+cat >> conftest.$ac_ext <<EOF
+#include <qiconview.h>
+EOF
+fi
+
+fi
+
+echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
+cat >> conftest.$ac_ext <<EOF
+#error 1
+#endif
+
+int main() {
+EOF
+if test "$kde_qtver" = "2"; then
+cat >> conftest.$ac_ext <<EOF
+ QStringList *t = new QStringList();
+EOF
+if test $kde_qtsubver -gt 0; then
+cat >> conftest.$ac_ext <<EOF
+ QIconView iv(0);
+ iv.setWordWrapIconText(false);
+ QString s;
+ s.setLatin1("Elvis is alive", 14);
+ int magnolia = QEvent::Speech; /* new in 2.2 beta2 */
+EOF
+fi
+fi
+cat >> conftest.$ac_ext <<EOF
+ return 0;
+}
+EOF
+])
+
+AC_DEFUN(KDE_USE_QT,
+[
+
+if test -z "$1"; then
+ kde_qtver=2
+ kde_qtsubver=1
+else
+ kde_qtsubver=`echo "$1" | sed -e 's#[0-9]\+\.\([0-9]\+\).*#\1#'`
+ # following is the check if subversion isn´t found in passed argument
+ if test "$kde_qtsubver" = "$1"; then
+ kde_qtsubver=1
+ fi
+ kde_qtver=`echo "$1" | sed -e 's#^\([0-9]\+\)\..*#\1#'`
+ if test "$kde_qtver" = "1"; then
+ kde_qtsubver=42
+ else
+ # this is the version number fallback to 2.1, unless major version is 1 or 2
+ if test "$kde_qtver" != "2"; then
+ kde_qtver=2
+ kde_qtsubver=1
+ fi
+ fi
+fi
+
+if test -z "$2"; then
+ if test $kde_qtver = 2; then
+ if test $kde_qtsubver -gt 0; then
+ kde_qt_minversion=">= Qt 2.2.2"
+ else
+ kde_qt_minversion=">= Qt 2.0.2"
+ fi
+ else
+ kde_qt_minversion=">= 1.42 and < 2.0"
+ fi
+else
+ kde_qt_minversion=$2
+fi
+
+if test -z "$3"; then
+ if test $kde_qtver = 2; then
+ if test $kde_qtsubver -gt 0; then
+ kde_qt_verstring="QT_VERSION >= 222"
+ else
+ kde_qt_verstring="QT_VERSION >= 200"
+ fi
+ else
+ kde_qt_verstring="QT_VERSION >= 142 && QT_VERSION < 200"
+ fi
+else
+ kde_qt_verstring=$3
+fi
+
+if test $kde_qtver = 2; then
+ kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt"
+else
+ kde_qt_dirs="$QTDIR /usr/lib/qt"
+fi
+])
+
+AC_DEFUN(KDE_CHECK_QT_DIRECT,
+[
+AC_REQUIRE([KDE_USE_QT])
+AC_MSG_CHECKING([if Qt compiles without flags])
+AC_CACHE_VAL(kde_cv_qt_direct,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH
+ac_LIBRARY_PATH="$LIBRARY_PATH"
+ac_cxxflags_safe="$CXXFLAGS"
+ac_ldflags_safe="$LDFLAGS"
+ac_libs_safe="$LIBS"
+
+CXXFLAGS="$CXXFLAGS -I$qt_includes"
+LDFLAGS="$LDFLAGS $X_LDFLAGS"
+LIBS="$LIBQT -lXext -lX11 $LIBSOCKET"
+LD_LIBRARY_PATH=
+export LD_LIBRARY_PATH
+LIBRARY_PATH=
+export LIBRARY_PATH
+
+KDE_PRINT_QT_PROGRAM
+
+if AC_TRY_EVAL(ac_link) && test -s conftest; then
+ kde_cv_qt_direct="yes"
+else
+ kde_cv_qt_direct="no"
+ echo "configure: failed program was:" >&AC_FD_CC
+ cat conftest.$ac_ext >&AC_FD_CC
+fi
+
+rm -f conftest*
+CXXFLAGS="$ac_cxxflags_safe"
+LDFLAGS="$ac_ldflags_safe"
+LIBS="$ac_libs_safe"
+
+LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe"
+export LD_LIBRARY_PATH
+LIBRARY_PATH="$ac_LIBRARY_PATH"
+export LIBRARY_PATH
+AC_LANG_RESTORE
+])
+
+if test "$kde_cv_qt_direct" = "yes"; then
+ AC_MSG_RESULT(yes)
+ $1
+else
+ AC_MSG_RESULT(no)
+ $2
+fi
+])
+
+dnl ------------------------------------------------------------------------
+dnl Try to find the Qt headers and libraries.
+dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed)
+dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed)
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_PATH_QT_1_3,
+[
+AC_REQUIRE([K_PATH_X])
+AC_REQUIRE([KDE_USE_QT])
+
+dnl ------------------------------------------------------------------------
+dnl Add configure flag to enable linking to MT version of Qt library.
+dnl ------------------------------------------------------------------------
+
+AC_ARG_ENABLE(
+ mt,
+ [ --enable-mt link to threaded Qt (experimental)],
+ kde_use_qt_mt=$enableval,
+ kde_use_qt_mt=no
+)
+
+USING_QT_MT=""
+
+dnl ------------------------------------------------------------------------
+dnl If we got --enable-qt-mt then adjust some vars for the host.
+dnl ------------------------------------------------------------------------
+
+if test "x$kde_use_qt_mt" = "xyes"; then
+
+ case $host in
+ *-*-linux-*)
+ if test "x$GCC" = "xyes"; then
+ CPPFLAGS="$CPPFLAGS -DQT_THREAD_SUPPORT -pthread"
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -pthread"
+ else
+ AC_MSG_WARN([Compiler is not gcc. MT support disabled.])
+ fi
+ ;;
+ *)
+ AC_MSG_WARN([MT not yet supported on $host - disabled.])
+ ;;
+ esac
+
+fi
+
+kde_qt_was_given=yes
+
+dnl ------------------------------------------------------------------------
+dnl If we haven't been told how to link to Qt, we work it out for ourselves.
+dnl ------------------------------------------------------------------------
+
+if test -z "$LIBQT_GLOB"; then
+
+ LIBQT_GLOB="libqt.*"
+
+fi
+
+if test -z "$LIBQT"; then
+
+ LIBQT="-lqt"
+ kde_int_qt="-lqt"
+
+dnl ------------------------------------------------------------------------
+dnl If we got --enable-qt-mt then adjust the Qt library name for the host.
+dnl ------------------------------------------------------------------------
+
+ if test "x$kde_use_qt_mt" = "xyes"; then
+
+ case $host in
+ *-*-linux-*)
+ if test "x$GCC" = "xyes"; then
+ LIBQT="-lqt-mt"
+ kde_int_qt="-lqt-mt"
+ LIBQT_GLOB="libqt-mt.*"
+ USING_QT_MT="using -mt"
+ fi
+ ;;
+ esac
+ fi
+
+ kde_qt_was_given=no
+
+else
+ kde_int_qt="$LIBQT"
+fi
+
+if test $kde_qtver = 2; then
+
+ AC_REQUIRE([AC_FIND_PNG])
+ AC_REQUIRE([AC_FIND_JPEG])
+ LIBQT="$LIBQT $LIBPNG $LIBJPEG"
+fi
+
+AC_MSG_CHECKING([for Qt])
+
+LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET"
+ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO
+qt_libraries=""
+qt_includes=""
+AC_ARG_WITH(qt-dir,
+ [ --with-qt-dir=DIR where the root of Qt is installed ],
+ [ ac_qt_includes="$withval"/include
+ ac_qt_libraries="$withval"/lib
+ ac_qt_bindir="$withval"/bin
+ ])
+
+AC_ARG_WITH(qt-includes,
+ [ --with-qt-includes=DIR where the Qt includes are. ],
+ [
+ ac_qt_includes="$withval"
+ ])
+
+kde_qt_libs_given=no
+
+AC_ARG_WITH(qt-libraries,
+ [ --with-qt-libraries=DIR where the Qt library is installed.],
+ [ ac_qt_libraries="$withval"
+ kde_qt_libs_given=yes
+ ])
+
+AC_CACHE_VAL(ac_cv_have_qt,
+[#try to guess Qt locations
+
+qt_incdirs=""
+for dir in $kde_qt_dirs; do
+ qt_incdirs="$qt_incdirs $dir/include $dir"
+done
+qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt $x_includes"
+if test ! "$ac_qt_includes" = "NO"; then
+ qt_incdirs="$ac_qt_includes $qt_incdirs"
+fi
+
+if test "$kde_qtver" = "2"; then
+ kde_qt_header=qstyle.h
+else
+ kde_qt_header=qglobal.h
+fi
+
+AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir)
+ac_qt_includes="$qt_incdir"
+
+qt_libdirs=""
+for dir in $kde_qt_dirs; do
+ qt_libdirs="$qt_libdirs $dir/lib $dir"
+done
+qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries"
+if test ! "$ac_qt_libraries" = "NO"; then
+ qt_libdir=$ac_qt_libraries
+else
+ qt_libdirs="$ac_qt_libraries $qt_libdirs"
+ # if the Qt was given, the chance is too big that libqt.* doesn't exist
+ qt_libdir=NONE
+ for dir in $qt_libdirs; do
+ try="ls -1 $dir/${LIBQT_GLOB}"
+ if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi
+ done
+fi
+
+ac_qt_libraries="$qt_libdir"
+
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+
+ac_cxxflags_safe="$CXXFLAGS"
+ac_ldflags_safe="$LDFLAGS"
+ac_libs_safe="$LIBS"
+
+CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
+LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS"
+LIBS="$LIBS $LIBQT"
+
+KDE_PRINT_QT_PROGRAM
+
+if AC_TRY_EVAL(ac_link) && test -s conftest; then
+ rm -f conftest*
+else
+ echo "configure: failed program was:" >&AC_FD_CC
+ cat conftest.$ac_ext >&AC_FD_CC
+ ac_qt_libraries="NO"
+fi
+rm -f conftest*
+CXXFLAGS="$ac_cxxflags_safe"
+LDFLAGS="$ac_ldflags_safe"
+LIBS="$ac_libs_safe"
+
+AC_LANG_RESTORE
+if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then
+ ac_cv_have_qt="have_qt=no"
+ ac_qt_notfound=""
+ if test "$ac_qt_includes" = NO; then
+ if test "$ac_qt_libraries" = NO; then
+ ac_qt_notfound="(headers and libraries)";
+ else
+ ac_qt_notfound="(headers)";
+ fi
+ else
+ ac_qt_notfound="(libraries)";
+ fi
+
+ AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation!
+For more details about this problem, look at the end of config.log.])
+else
+ have_qt="yes"
+fi
+])
+
+eval "$ac_cv_have_qt"
+
+if test "$have_qt" != yes; then
+ AC_MSG_RESULT([$have_qt]);
+else
+ ac_cv_have_qt="have_qt=yes \
+ ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries"
+ AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT])
+
+ qt_libraries="$ac_qt_libraries"
+ qt_includes="$ac_qt_includes"
+fi
+
+if test ! "$kde_qt_libs_given" = "yes"; then
+KDE_CHECK_QT_DIRECT(qt_libraries= ,[])
+fi
+
+AC_SUBST(qt_libraries)
+AC_SUBST(qt_includes)
+
+if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then
+ QT_INCLUDES="";
+else
+ QT_INCLUDES="-I$qt_includes"
+ all_includes="$QT_INCLUDES $all_includes"
+fi
+
+if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then
+ QT_LDFLAGS=""
+else
+ QT_LDFLAGS="-L$qt_libraries"
+ all_libraries="$all_libraries $QT_LDFLAGS"
+fi
+
+AC_SUBST(QT_INCLUDES)
+AC_SUBST(QT_LDFLAGS)
+AC_PATH_QT_MOC_UIC
+
+LIB_QT="$kde_int_qt "'$(LIBPNG) $(LIBJPEG) -lXext $(LIB_X11) $(LIBSM)'
+AC_SUBST(LIB_QT)
+
+])
+
+AC_DEFUN(AC_PATH_QT,
+[
+AC_PATH_QT_1_3
+])
+
+AC_DEFUN(KDE_CHECK_FINAL,
+[
+ AC_ARG_ENABLE(final, [ --enable-final build size optimized apps (experimental - needs lots of memory)],
+ kde_use_final=$enableval, kde_use_final=no)
+
+ KDE_COMPILER_REPO
+ if test "x$kde_use_final" = "xyes"; then
+ KDE_USE_FINAL_TRUE=""
+ KDE_USE_FINAL_FALSE="#"
+ else
+ KDE_USE_FINAL_TRUE="#"
+ KDE_USE_FINAL_FALSE=""
+ fi
+ AC_SUBST(KDE_USE_FINAL_TRUE)
+ AC_SUBST(KDE_USE_FINAL_FALSE)
+
+ AC_ARG_ENABLE(closure, [ --disable-closure don't delay template instantiation],
+ kde_use_closure=$enableval, kde_use_closure=yes)
+
+ if test "x$kde_use_closure" = "xyes"; then
+ KDE_USE_CLOSURE_TRUE=""
+ KDE_USE_CLOSURE_FALSE="#"
+# CXXFLAGS="$CXXFLAGS $REPO"
+ else
+ KDE_USE_CLOSURE_TRUE="#"
+ KDE_USE_CLOSURE_FALSE=""
+ fi
+ AC_SUBST(KDE_USE_CLOSURE_TRUE)
+ AC_SUBST(KDE_USE_CLOSURE_FALSE)
+])
+
+dnl ------------------------------------------------------------------------
+dnl Now, the same with KDE
+dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed)
+dnl and $(kde_includes) will be the kdehdrlocation (if needed)
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_BASE_PATH_KDE,
+[
+AC_PREREQ([2.13])
+AC_REQUIRE([AC_PATH_QT])dnl
+AC_CHECK_RPATH
+AC_MSG_CHECKING([for KDE])
+
+if test "${prefix}" != NONE; then
+ kde_includes=${prefix}/include
+ ac_kde_includes=$prefix/include
+
+ if test "${exec_prefix}" != NONE; then
+ kde_libraries=${exec_prefix}/lib
+ ac_kde_libraries=$exec_prefix/lib
+ else
+ kde_libraries=${prefix}/lib
+ ac_kde_libraries=$prefix/lib
+ fi
+else
+ ac_kde_includes=
+ ac_kde_libraries=
+ kde_libraries=""
+ kde_includes=""
+fi
+
+AC_CACHE_VAL(ac_cv_have_kde,
+[#try to guess kde locations
+
+if test "$kde_qtver" = 1; then
+ kde_check_header="ksock.h"
+ kde_check_lib="libkdecore.la"
+else
+ kde_check_header="ksharedptr.h"
+ kde_check_lib="libkio.la"
+fi
+
+if test -z "$1"; then
+
+kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/kde/include /usr/include/kde /usr/include /opt/kde2/include /opt/kde/include $x_includes $qt_includes"
+test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs"
+kde_incdirs="$ac_kde_includes $kde_incdirs"
+AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir)
+ac_kde_includes="$kde_incdir"
+
+if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then
+ AC_MSG_ERROR([
+in the prefix, you've chosen, are no KDE headers installed. This will fail.
+So, check this please and use another prefix!])
+fi
+
+kde_libdirs="/usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib /usr/X11R6/lib /opt/kde2/lib /opt/kde/lib /usr/X11R6/kde/lib"
+test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib $KDEDIR $kde_libdirs"
+kde_libdirs="$ac_kde_libraries $kde_libdirs"
+AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir)
+ac_kde_libraries="$kde_libdir"
+
+if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then
+AC_MSG_ERROR([
+in the prefix, you've chosen, are no KDE libraries installed. This will fail.
+So, check this please and use another prefix!])
+fi
+ac_kde_libraries="$kde_libdir"
+
+if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO; then
+ ac_cv_have_kde="have_kde=no"
+else
+ ac_cv_have_kde="have_kde=yes \
+ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
+fi
+
+else dnl test -z $1
+
+ ac_cv_have_kde="have_kde=no"
+
+fi
+])dnl
+
+eval "$ac_cv_have_kde"
+
+if test "$have_kde" != "yes"; then
+ if test "${prefix}" = NONE; then
+ ac_kde_prefix="$ac_default_prefix"
+ else
+ ac_kde_prefix="$prefix"
+ fi
+ if test "$exec_prefix" = NONE; then
+ ac_kde_exec_prefix="$ac_kde_prefix"
+ AC_MSG_RESULT([will be installed in $ac_kde_prefix])
+ else
+ ac_kde_exec_prefix="$exec_prefix"
+ AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix])
+ fi
+
+ kde_libraries="${ac_kde_exec_prefix}/lib"
+ kde_includes=${ac_kde_prefix}/include
+
+else
+ ac_cv_have_kde="have_kde=yes \
+ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
+ AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes])
+
+ kde_libraries="$ac_kde_libraries"
+ kde_includes="$ac_kde_includes"
+fi
+AC_SUBST(kde_libraries)
+AC_SUBST(kde_includes)
+
+if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" ; then
+ KDE_INCLUDES=""
+else
+ KDE_INCLUDES="-I$kde_includes"
+ all_includes="$KDE_INCLUDES $all_includes"
+fi
+
+KDE_LDFLAGS="-L$kde_libraries"
+if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then
+ all_libraries="$all_libraries $KDE_LDFLAGS"
+fi
+
+AC_SUBST(KDE_LDFLAGS)
+AC_SUBST(KDE_INCLUDES)
+
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+all_libraries="$all_libraries $USER_LDFLAGS"
+all_includes="$all_includes $USER_INCLUDES"
+AC_SUBST(all_includes)
+AC_SUBST(all_libraries)
+
+AC_SUBST(AUTODIRS)
+])
+
+AC_DEFUN(KDE_CHECK_EXTRA_LIBS,
+[
+AC_MSG_CHECKING(for extra includes)
+AC_ARG_WITH(extra-includes, [ --with-extra-includes=DIR
+ adds non standard include paths],
+ kde_use_extra_includes="$withval",
+ kde_use_extra_includes=NONE
+)
+kde_extra_includes=
+if test -n "$kde_use_extra_includes" && \
+ test "$kde_use_extra_includes" != "NONE"; then
+
+ ac_save_ifs=$IFS
+ IFS=':'
+ for dir in $kde_use_extra_includes; do
+ kde_extra_includes="$kde_extra_includes $dir"
+ USER_INCLUDES="$USER_INCLUDES -I$dir"
+ done
+ IFS=$ac_save_ifs
+ kde_use_extra_includes="added"
+else
+ kde_use_extra_includes="no"
+fi
+AC_SUBST(USER_INCLUDES)
+
+AC_MSG_RESULT($kde_use_extra_includes)
+
+kde_extra_libs=
+AC_MSG_CHECKING(for extra libs)
+AC_ARG_WITH(extra-libs, [ --with-extra-libs=DIR adds non standard library paths],
+ kde_use_extra_libs=$withval,
+ kde_use_extra_libs=NONE
+)
+if test -n "$kde_use_extra_libs" && \
+ test "$kde_use_extra_libs" != "NONE"; then
+
+ ac_save_ifs=$IFS
+ IFS=':'
+ for dir in $kde_use_extra_libs; do
+ kde_extra_libs="$kde_extra_libs $dir"
+ KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir"
+ USER_LDFLAGS="$USER_LDFLAGS -L$dir"
+ done
+ IFS=$ac_save_ifs
+ kde_use_extra_libs="added"
+else
+ kde_use_extra_libs="no"
+fi
+
+AC_SUBST(USER_LDFLAGS)
+
+AC_MSG_RESULT($kde_use_extra_libs)
+
+])
+
+AC_DEFUN(KDE_1_CHECK_PATH_HEADERS,
+[
+ AC_MSG_CHECKING([for KDE headers installed])
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+cat > conftest.$ac_ext <<EOF
+#include <stdio.h>
+#include "confdefs.h"
+#include <kapp.h>
+
+int main() {
+ printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data());
+ printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data());
+ printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data());
+ printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data());
+ printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data());
+ printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data());
+ printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data());
+ printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data());
+ printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data());
+ printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data());
+ printf("kde_wallpaperdir=\\"%s\\"\n",
+ KApplication::kde_wallpaperdir().data());
+ printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data());
+ printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data());
+ printf("kde_servicesdir=\\"/tmp/dummy\\"\n");
+ printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n");
+ printf("kde_moduledir=\\"/tmp/dummy\\"\n");
+ return 0;
+ }
+EOF
+
+ ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext'
+ if AC_TRY_EVAL(ac_compile); then
+ AC_MSG_RESULT(yes)
+ else
+ AC_MSG_ERROR([your system is not able to compile a small KDE application!
+Check, if you installed the KDE header files correctly.
+For more details about this problem, look at the end of config.log.])
+ fi
+
+ AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_CHECK_KDEQTADDON,
+[
+AC_MSG_CHECKING(for kde-qt-addon)
+AC_CACHE_VAL(kde_cv_have_kdeqtaddon,
+[
+ kde_ldflags_safe="$LDFLAGS"
+ kde_libs_safe="$LIBS"
+ kde_cxxflags_safe="$CXXFLAGS"
+
+ LIBS="-lkde-qt-addon $LIBQT $LIBS"
+ CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes"
+ LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS"
+
+ AC_TRY_LINK([
+ #include <qdom.h>
+ ],
+ [
+ QDomDocument doc;
+ ],
+ kde_cv_have_kdeqtaddon=yes,
+ kde_cv_have_kdeqtaddon=no
+ )
+
+ LDFLAGS=$kde_ldflags_safe
+ LIBS=$kde_libs_safe
+ kde_cxxflags_safe="$CXXFLAGS"
+])
+
+AC_MSG_RESULT($kde_cv_have_kdeqtaddon)
+
+if test "$kde_cv_have_kdeqtaddon" = "no"; then
+ AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first.
+It is a separate package (and CVS module) named kde-qt-addon.])
+fi
+])
+
+AC_DEFUN(KDE_CHECK_KIMGIO,
+[
+ AC_REQUIRE([AC_BASE_PATH_KDE])
+ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+ AC_REQUIRE([AC_FIND_TIFF])
+ AC_REQUIRE([AC_FIND_JPEG])
+ AC_REQUIRE([AC_FIND_PNG])
+ AC_REQUIRE([KDE_CREATE_LIBS_ALIASES])
+
+ if test "$1" = "existance"; then
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ kde_save_LIBS="$LIBS"
+ LIBS="$LIBS $all_libraries $LIBJPEG $LIBTIFF $LIBPNG $LIBQT -lm"
+ AC_CHECK_LIB(kimgio, kimgioRegister, [
+ LIBKIMGIO_EXISTS=yes],LIBKIMGIO_EXISTS=no)
+ LIBS="$kde_save_LIBS"
+ AC_LANG_RESTORE
+ else
+ LIBKIMGIO_EXISTS=yes
+ fi
+
+ if test "$LIBKIMGIO_EXISTS" = "yes"; then
+ LIB_KIMGIO='-lkimgio'
+ else
+ LIB_KIMGIO=''
+ fi
+ AC_SUBST(LIB_KIMGIO)
+])
+
+AC_DEFUN(KDE_CREATE_LIBS_ALIASES,
+[
+ AC_REQUIRE([KDE_MISC_TESTS])
+ AC_REQUIRE([KDE_CHECK_LIBDL])
+ AC_REQUIRE([K_PATH_X])
+
+if test $kde_qtver = 2; then
+ LIB_KDECORE='-lkdecore'
+ AC_SUBST(LIB_KDECORE)
+ LIB_KDEUI='-lkdeui'
+ AC_SUBST(LIB_KDEUI)
+ LIB_KFORMULA='-lkformula'
+ AC_SUBST(LIB_KFORMULA)
+ LIB_KIO='-lkio'
+ AC_SUBST(LIB_KIO)
+ LIB_KSYCOCA='-lksycoca'
+ AC_SUBST(LIB_KSYCOCA)
+ LIB_SMB='-lsmb'
+ AC_SUBST(LIB_SMB)
+ LIB_KFILE='-lkfile'
+ AC_SUBST(LIB_KFILE)
+ LIB_KAB='-lkab'
+ AC_SUBST(LIB_KAB)
+ LIB_KHTML='-lkhtml'
+ AC_SUBST(LIB_KHTML)
+ LIB_KSPELL='-lkspell'
+ AC_SUBST(LIB_KSPELL)
+ LIB_KPARTS='-lkparts'
+ AC_SUBST(LIB_KPARTS)
+ LIB_KWRITE='-lkwrite'
+ AC_SUBST(LIB_KWRITE)
+else
+ LIB_KDECORE='-lkdecore -lXext $(LIB_QT)'
+ AC_SUBST(LIB_KDECORE)
+ LIB_KDEUI='-lkdeui $(LIB_KDECORE)'
+ AC_SUBST(LIB_KDEUI)
+ LIB_KFM='-lkfm $(LIB_KDECORE)'
+ AC_SUBST(LIB_KFM)
+ LIB_KFILE='-lkfile $(LIB_KFM) $(LIB_KDEUI)'
+ AC_SUBST(LIB_KFILE)
+ LIB_KAB='-lkab $(LIB_KIMGIO) $(LIB_KDECORE)'
+ AC_SUBST(LIB_KAB)
+fi
+])
+
+AC_DEFUN(AC_PATH_KDE,
+[
+ AC_BASE_PATH_KDE
+ AC_ARG_ENABLE(path-check, [ --disable-path-check don't try to find out, where to install],
+ [
+ if test "$enableval" = "no";
+ then ac_use_path_checking="default"
+ else ac_use_path_checking=""
+ fi
+ ],
+ [
+ if test "$kde_qtver" = 1;
+ then ac_use_path_checking=""
+ else ac_use_path_checking="default"
+ fi
+ ]
+ )
+
+ AC_CREATE_KFSSTND($ac_use_path_checking)
+
+ AC_SUBST_KFSSTND
+ KDE_CREATE_LIBS_ALIASES
+])
+
+dnl obsolete
+AC_DEFUN(AC_CHECK_SETENV,
+[
+ AC_OBSOLETE([$0], [; instead use AC_CHECK_FUNCS([setenv unsetenv])])dnl
+ AC_CHECK_FUNCS([setenv unsetenv])
+])
+
+AC_DEFUN(AC_CHECK_GETDOMAINNAME,
+[
+AC_MSG_CHECKING(for getdomainname)
+AC_CACHE_VAL(ac_cv_func_getdomainname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+save_CXXFLAGS="$CXXFLAGS"
+kde_safe_LIBS="$LIBS"
+LIBS="$LIBS $X_EXTRA_LIBS"
+if test "$GCC" = "yes"; then
+CXXFLAGS="$CXXFLAGS -pedantic-errors"
+fi
+AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <unistd.h>
+],
+[
+char buffer[200];
+getdomainname(buffer, 200);
+],
+ac_cv_func_getdomainname=yes,
+ac_cv_func_getdomainname=no)
+CXXFLAGS="$save_CXXFLAGS"
+LIBS=$kde_safe_LIBS
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_getdomainname)
+
+AC_MSG_CHECKING([if getdomainname needs custom prototype])
+AC_CACHE_VAL(ac_cv_proto_getdomainname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+if eval "test \"`echo $ac_cv_func_getdomainname`\" = yes"; then
+ ac_cv_proto_getdomainname=no
+else
+ kde_safe_libs=$LIBS
+ LIBS="$LIBS $X_EXTRA_LIBS"
+ AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+
+extern "C" int getdomainname (char *, int);
+],
+[
+char buffer[200];
+getdomainname(buffer, 200);
+],
+ ac_cv_func_getdomainname=yes
+ ac_cv_proto_getdomainname=yes,
+ AC_MSG_RESULT([fatal error])
+ AC_MSG_ERROR([getdomainname unavailable]))
+fi
+LIBS=$kde_safe_libs
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_proto_getdomainname)
+
+if eval "test \"`echo $ac_cv_func_getdomainname`\" = yes"; then
+ AC_DEFINE(HAVE_GETDOMAINNAME, 1, [Define if you have getdomainname])
+fi
+if eval "test \"`echo $ac_cv_proto_getdomainname`\" = no"; then
+ AC_DEFINE(HAVE_GETDOMAINNAME_PROTO, 1,
+ [Define if you have getdomainname prototype])
+fi
+
+])
+
+AC_DEFUN(AC_CHECK_GETHOSTNAME,
+[
+
+AC_MSG_CHECKING([for gethostname])
+AC_CACHE_VAL(ac_cv_func_gethostname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+save_CXXFLAGS="$CXXFLAGS"
+if test "$GCC" = "yes"; then
+CXXFLAGS="$CXXFLAGS -pedantic-errors"
+fi
+AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+],
+[
+char buffer[200];
+gethostname(buffer, 200);
+],
+ac_cv_func_gethostname=yes,
+ac_cv_func_gethostname=no)
+CXXFLAGS="$save_CXXFLAGS"
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_gethostname)
+
+AC_MSG_CHECKING([if gethostname needs custom prototype])
+AC_CACHE_VAL(ac_cv_proto_gethostname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+if eval "test \"`echo $ac_cv_func_gethostname`\" = yes"; then
+ ac_cv_proto_gethostname=no
+else
+ AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+
+extern "C" int gethostname (char *, int);
+],
+[
+char buffer[200];
+gethostname(buffer, 200);
+],
+ ac_cv_func_gethostname=yes
+ ac_cv_proto_gethostname=yes,
+ AC_MSG_RESULT([fatal error])
+ AC_MSG_ERROR(gethostname unavailable))
+fi
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_proto_gethostname)
+
+if eval "test \"`echo $ac_cv_proto_gethostname`\" = no"; then
+ AC_DEFINE(HAVE_GETHOSTNAME_PROTO, 1,
+ [Define if you have gethostname prototype])
+fi
+if eval "test \"`echo $ac_cv_func_gethostname`\" = yes"; then
+ AC_DEFINE(HAVE_GETHOSTNAME, 1, [Define if you have getdomainname])
+fi
+])
+
+AC_DEFUN(AC_CHECK_USLEEP,
+[
+AC_MSG_CHECKING([for usleep])
+AC_CACHE_VAL(ac_cv_func_usleep,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_libs_safe="$LIBS"
+LIBS="$LIBS $LIBUCB"
+AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+],
+[
+usleep(200);
+],
+ac_cv_func_usleep=yes,
+ac_cv_func_usleep=no)
+LIBS="$ac_libs_safe"
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_usleep)
+if eval "test \"`echo $ac_cv_func_usleep`\" = yes"; then
+ AC_DEFINE(HAVE_USLEEP, 1, [Define if you have the usleep function])
+fi
+])
+
+AC_DEFUN(AC_CHECK_RANDOM,
+[
+AC_MSG_CHECKING([for random])
+AC_CACHE_VAL(ac_cv_func_random,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_libs_safe="$LIBS"
+LIBS="$LIBS $LIBUCB"
+AC_TRY_LINK([
+#include <stdlib.h>
+],
+[
+random();
+],
+ac_cv_func_random=yes,
+ac_cv_func_random=no)
+LIBS="$ac_libs_safe"
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_random)
+if eval "test \"`echo $ac_cv_func_random`\" = yes"; then
+ AC_DEFINE(HAVE_RANDOM, 1, [Define if you have random])
+fi
+])
+
+AC_DEFUN(AC_FIND_GIF,
+ [AC_MSG_CHECKING([for giflib])
+AC_CACHE_VAL(ac_cv_lib_gif,
+[ac_save_LIBS="$LIBS"
+LIBS="$all_libraries -lgif -lX11 $LIBSOCKET"
+AC_TRY_LINK(dnl
+[
+#ifdef __cplusplus
+extern "C" {
+#endif
+int GifLastError(void);
+#ifdef __cplusplus
+}
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+],
+ [return GifLastError();],
+ eval "ac_cv_lib_gif=yes",
+ eval "ac_cv_lib_gif=no")
+LIBS="$ac_save_LIBS"
+])dnl
+if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then
+ AC_MSG_RESULT(yes)
+ AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif])
+else
+ AC_MSG_ERROR(You need giflib30. Please install the kdesupport package)
+fi
+])
+
+AC_DEFUN(KDE_FIND_JPEG_HELPER,
+[
+AC_MSG_CHECKING([for libjpeg$2])
+AC_CACHE_VAL(ac_cv_lib_jpeg_$1,
+[
+AC_LANG_C
+ac_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+AC_TRY_LINK(
+[/* Override any gcc2 internal prototype to avoid an error. */
+struct jpeg_decompress_struct;
+typedef struct jpeg_decompress_struct * j_decompress_ptr;
+typedef int size_t;
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void jpeg_CreateDecompress(j_decompress_ptr cinfo,
+ int version, size_t structsize);
+#ifdef __cplusplus
+}
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+],
+ [jpeg_CreateDecompress(0L, 0, 0);],
+ eval "ac_cv_lib_jpeg_$1=-ljpeg$2",
+ eval "ac_cv_lib_jpeg_$1=no")
+LIBS="$ac_save_LIBS"
+CFLAGS="$ac_save_CFLAGS"
+])
+
+if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then
+ LIBJPEG="$ac_cv_lib_jpeg_$1"
+ AC_MSG_RESULT($ac_cv_lib_jpeg_$1)
+else
+ AC_MSG_RESULT(no)
+ $3
+fi
+
+])
+
+AC_DEFUN(AC_FIND_JPEG,
+[
+dnl first look for libraries
+KDE_FIND_JPEG_HELPER(6b, 6b,
+ KDE_FIND_JPEG_HELPER(normal, [],
+ [
+dnl what to do, if the normal way fails:
+ if test -f "$kde_libraries/libjpeg.so"; then
+ test -f ./libjpegkde.so || $LN_S $kde_libraries/libjpeg.so ./libjpegkde.so
+ ac_cv_lib_jpeg="-L\${topdir} -ljpegkde"
+ else if test -f "$kde_libraries/libjpeg.sl"; then
+ test -f ./libjpegkde.sl ||$LN_S $kde_libraries/libjpeg.sl ./libjpegkde.sl
+ ac_cv_lib_jpeg="-L\${topdir} -ljpegkde"
+ else if test -f "$kde_libraries/libjpeg.a"; then
+ test -f ./libjpegkde.a || $LN_S $kde_libraries/libjpeg.a ./libjpegkde.a
+ ac_cv_lib_jpeg="-L\${topdir} -ljpegkde"
+ else
+ ac_cv_lib_jpeg=
+ fi
+ fi
+ fi
+
+ LIBJPEG=$ac_cv_lib_jpeg
+]))
+
+dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h
+dnl requires system dependent includes loaded before it)
+jpeg_incdirs="/usr/include /usr/local/include $kde_extra_includes"
+AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir)
+test "x$jpeg_incdir" = xNO && jpeg_incdir=
+
+dnl if headers _and_ libraries are missing, this is no error, and we
+dnl continue with a warning (the user will get no jpeg support in khtml)
+dnl if only one is missing, it means a configuration error, but we still
+dnl only warn
+if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then
+ AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg])
+else
+ if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then
+ AC_MSG_WARN([
+There is an installation error in jpeg support. You seem to have only one
+of either the headers _or_ the libraries installed. You may need to either
+provide correct --with-extra-... options, or the development package of
+libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
+Disabling JPEG support.
+])
+ else
+ AC_MSG_WARN([libjpeg not found. disable JPEG support.])
+ fi
+ jpeg_incdir=
+ LIBJPEG=
+fi
+
+AC_SUBST(LIBJPEG)
+])
+
+AC_DEFUN(AC_FIND_ZLIB,
+[
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+AC_MSG_CHECKING([for libz])
+AC_CACHE_VAL(ac_cv_lib_z,
+[
+AC_LANG_C
+kde_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET"
+kde_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+AC_TRY_LINK(dnl
+[
+#include<zlib.h>
+],
+ [return (zlibVersion() == ZLIB_VERSION); ],
+ eval "ac_cv_lib_z='-lz'",
+ eval "ac_cv_lib_z=no")
+LIBS="$kde_save_LIBS"
+CFLAGS="$kde_save_CFLAGS"
+])dnl
+if test ! "$ac_cv_lib_z" = no; then
+ AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz])
+ LIBZ="$ac_cv_lib_z"
+ AC_SUBST(LIBZ)
+ AC_MSG_RESULT($ac_cv_lib_z)
+else
+ AC_MSG_ERROR(not found. Check your installation and look into config.log)
+ LIBZ=""
+ AC_SUBST(LIBZ)
+fi
+])
+
+AC_DEFUN(KDE_TRY_TIFFLIB,
+[
+AC_MSG_CHECKING([for libtiff $1])
+
+AC_CACHE_VAL(kde_cv_libtiff_$1,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+kde_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm"
+kde_save_CXXFLAGS="$CXXFLAGS"
+CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES"
+
+AC_TRY_LINK(dnl
+[
+#include<tiffio.h>
+],
+ [return (TIFFOpen( "", "r") == 0); ],
+[
+ kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ"
+], [
+ kde_cv_libtiff_$1=no
+])
+
+LIBS="$kde_save_LIBS"
+CXXFLAGS="$kde_save_CXXFLAGS"
+AC_LANG_RESTORE
+])
+
+if test "$kde_cv_libtiff_$1" = "no"; then
+ AC_MSG_RESULT(no)
+ LIBTIFF=""
+ $3
+else
+ LIBTIFF="$kde_cv_libtiff_$1"
+ AC_MSG_RESULT(yes)
+ AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff])
+ $2
+fi
+
+])
+
+AC_DEFUN(AC_FIND_TIFF,
+[
+AC_REQUIRE([K_PATH_X])
+AC_REQUIRE([AC_FIND_ZLIB])
+AC_REQUIRE([AC_FIND_JPEG])
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+KDE_TRY_TIFFLIB(tiff, [],
+ KDE_TRY_TIFFLIB(tiff34))
+
+AC_SUBST(LIBTIFF)
+])
+
+
+AC_DEFUN(AC_FIND_PNG,
+[
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+AC_REQUIRE([AC_FIND_ZLIB])
+AC_MSG_CHECKING([for libpng])
+AC_CACHE_VAL(ac_cv_lib_png,
+[
+kde_save_LIBS="$LIBS"
+LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET"
+kde_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+AC_LANG_C
+AC_TRY_LINK(dnl
+ [
+ #include<png.h>
+ ],
+ [
+ png_structp png_ptr = png_create_read_struct( /* image ptr */
+ PNG_LIBPNG_VER_STRING, 0, 0, 0 );
+ return( png_ptr != 0 );
+ ],
+ eval "ac_cv_lib_png='-lpng $LIBZ -lm'",
+ eval "ac_cv_lib_png=no"
+)
+LIBS="$kde_save_LIBS"
+CFLAGS="$kde_save_CFLAGS"
+])dnl
+if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then
+ AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng])
+ LIBPNG="$ac_cv_lib_png"
+ AC_SUBST(LIBPNG)
+ AC_MSG_RESULT($ac_cv_lib_png)
+else
+ AC_MSG_RESULT(no)
+ LIBPNG=""
+ AC_SUBST(LIBPNG)
+fi
+])
+
+AC_DEFUN(AC_CHECK_BOOL,
+[
+ AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool])
+])
+
+AC_DEFUN(AC_CHECK_GNU_EXTENSIONS,
+[
+AC_MSG_CHECKING(if you need GNU extensions)
+AC_CACHE_VAL(ac_cv_gnu_extensions,
+[
+cat > conftest.c << EOF
+#include <features.h>
+
+#ifdef __GNU_LIBRARY__
+yes
+#endif
+EOF
+
+if (eval "$ac_cpp conftest.c") 2>&5 |
+ egrep "yes" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_gnu_extensions=yes
+else
+ ac_cv_gnu_extensions=no
+fi
+])
+
+AC_MSG_RESULT($ac_cv_gnu_extensions)
+if test "$ac_cv_gnu_extensions" = "yes"; then
+ AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions])
+fi
+])
+
+AC_DEFUN(KDE_CHECK_COMPILER_FLAG,
+[
+AC_REQUIRE([AC_CHECK_COMPILERS])
+AC_MSG_CHECKING(whether $CXX supports -$1)
+kde_cache=`echo $1 | sed 'y%.=/+-%___p_%'`
+AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache,
+[
+echo 'int main() { return 0; }' >conftest.cc
+eval "kde_cv_prog_cxx_$kde_cache=no"
+if test -z "`$CXX -$1 -c conftest.cc 2>&1`"; then
+ if test -z "`$CXX -$1 -o conftest conftest.o 2>&1`"; then
+ eval "kde_cv_prog_cxx_$kde_cache=yes"
+ fi
+fi
+rm -f conftest*
+])
+if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
+ AC_MSG_RESULT(yes)
+ :
+ $2
+else
+ AC_MSG_RESULT(no)
+ :
+ $3
+fi
+])
+
+AC_DEFUN(KDE_PROG_CC_PG,
+[ AC_CACHE_CHECK(whether ${CC-cc} accepts -pg, kde_cv_prog_cc_pg,
+ [echo 'void f(){}' > conftest.c
+ if test -z "`${CC-cc} -pg -c conftest.c 2>&1`"; then
+ kde_cv_prog_cc_pg=yes
+ else
+ kde_cv_prog_cc_pg=no
+ fi
+ rm -f conftest*
+])])
+
+AC_DEFUN(KDE_PROG_CXX_PG,
+[ AC_CACHE_CHECK(whether ${CXX-g++} accepts -pg, kde_cv_prog_cxx_pg,
+ [echo 'void f(){}' > conftest.cc
+ if test -z "`${CXX-g++} -pg -c conftest.cc 2>&1`"; then
+ kde_cv_prog_cxx_pg=yes
+ else
+ kde_cv_prog_cxx_pg=no
+ fi
+ rm -f conftest*
+])])
+
+dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables
+dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever])
+dnl it's all white-space separated
+AC_DEFUN(AC_REMOVE_FORBIDDEN,
+[ __val=$$1
+ __forbid=" $2 "
+ if test -n "$__val"; then
+ __new=""
+ ac_save_IFS=$IFS
+ IFS=" "
+ for i in $__val; do
+ case "$__forbid" in
+ *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;;
+ *) # Careful to not add spaces, where there were none, because otherwise
+ # libtool gets confused, if we change e.g. CXX
+ if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
+ esac
+ done
+ IFS=$ac_save_IFS
+ $1=$__new
+ fi
+])
+
+dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given
+AC_DEFUN(AC_VALIDIFY_CXXFLAGS,
+[dnl
+ AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath])
+ AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath])
+])
+
+AC_DEFUN(AC_CHECK_COMPILERS,
+[
+ dnl this is somehow a fat lie, but prevents other macros from double checking
+ AC_PROVIDE([AC_PROG_CC])
+ AC_PROVIDE([AC_PROG_CPP])
+ AC_PROVIDE([AC_PROG_CXX])
+ AC_PROVIDE([AC_PROG_CXXCPP])
+
+ AC_ARG_ENABLE(debug,[ --enable-debug enables debug symbols [default=no]],
+ [
+ if test $enableval = "no"; dnl
+ then
+ kde_use_debug_code="no"
+ kde_use_debug_define=yes
+ else
+ kde_use_debug_code="yes"
+ kde_use_debug_define=no
+ fi
+ ], [kde_use_debug_code="no"
+ kde_use_debug_define=no
+ ])
+ dnl Just for configure --help
+ AC_ARG_ENABLE(dummyoption,[ --disable-debug disables debug output and debug symbols [default=no]],[],[])
+
+ AC_ARG_ENABLE(strict,[ --enable-strict compiles with strict compiler options (may not work!)],
+ [
+ if test $enableval = "no"; then
+ kde_use_strict_options="no"
+ else
+ kde_use_strict_options="yes"
+ fi
+ ], [kde_use_strict_options="no"])
+
+ AC_ARG_ENABLE(profile,[ --enable-profile creates profiling infos [default=no]],
+ [kde_use_profiling=$enableval],
+ [kde_use_profiling="no"]
+ )
+
+dnl this was AC_PROG_CC. I had to include it manualy, since I had to patch it
+ AC_MSG_CHECKING(for a C-Compiler)
+ dnl if there is one, print out. if not, don't matter
+ AC_MSG_RESULT($CC)
+
+ if test -z "$CC"; then AC_CHECK_PROG(CC, gcc, gcc) fi
+ if test -z "$CC"; then AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) fi
+ if test -z "$CC"; then AC_CHECK_PROG(CC, xlc, xlc) fi
+ test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
+
+ AC_PROG_CC_WORKS
+ AC_PROG_CC_GNU
+
+ if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+ else
+ GCC=
+ fi
+
+ USER_CFLAGS=$CFLAGS
+ CFLAGS=
+
+ if test -z "$CFLAGS"; then
+ if test "$kde_use_debug_code" = "yes"; then
+ AC_PROG_CC_G
+ if test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g"
+ case $host in
+ *-*-linux-gnu)
+ CFLAGS="$CFLAGS -ansi -W -Wall -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE -D_BSD_SOURCE"
+ ;;
+ esac
+ fi
+ else
+ if test "$GCC" = "yes"; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=""
+ fi
+ if test "$kde_use_debug_define" = "yes"; then
+ CFLAGS="$CFLAGS -DNDEBUG"
+ dnl damn buggy compilers :-(
+ dnl if test "$GCC" = "yes"; then
+ dnl CFLAGS="$CFLAGS -fomit-frame-pointer"
+ dnl CXXFLAGS="$CXXFLAGS -fomit-frame-pointer"
+ dnl fi
+ fi
+ fi
+
+ if test "$kde_use_profiling" = yes; then
+ KDE_PROG_CC_PG
+ if test "$kde_cv_prog_cc_pg" = yes; then
+ CFLAGS="$CFLAGS -pg"
+ fi
+ fi
+
+ if test "$GCC" = "yes"; then
+ CFLAGS="$CFLAGS"
+
+ if test "$kde_use_strict_options" = "yes"; then
+ CFLAGS="$CFLAGS -W -Wall -ansi -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings"
+ fi
+ fi
+
+ fi
+
+ case "$host" in
+ *-*-sysv4.2uw*) CFLAGS="$CFLAGS -D_UNIXWARE";;
+ *-*-sysv5uw7*) CFLAGS="$CFLAGS -D_UNIXWARE7";;
+ esac
+
+ if test -n "$USER_CFLAGS"; then
+ CFLAGS="$CFLAGS $USER_CFLAGS"
+ fi
+
+ if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then
+ LDFLAGS=""
+ fi
+
+
+dnl this is AC_PROG_CPP. I had to include it here, since autoconf checks
+dnl dependecies between AC_PROG_CPP and AC_PROG_CC (or is it automake?)
+
+ AC_MSG_CHECKING(how to run the C preprocessor)
+ # On Suns, sometimes $CPP names a directory.
+ if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+ fi
+ if test -z "$CPP"; then
+ AC_CACHE_VAL(ac_cv_prog_CPP,
+ [ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ dnl Use a header file that comes with gcc, so configuring glibc
+ dnl with a fresh cross-compiler works.
+ AC_TRY_CPP([#include <assert.h>
+ Syntax Error], ,
+ CPP="${CC-cc} -E -traditional-cpp"
+ AC_TRY_CPP([#include <assert.h>
+ Syntax Error], , CPP=/lib/cpp))
+ ac_cv_prog_CPP="$CPP"])dnl
+ CPP="$ac_cv_prog_CPP"
+ else
+ ac_cv_prog_CPP="$CPP"
+ fi
+ AC_MSG_RESULT($CPP)
+ AC_SUBST(CPP)dnl
+
+
+ AC_MSG_CHECKING(for a C++-Compiler)
+ dnl if there is one, print out. if not, don't matter
+ AC_MSG_RESULT($CXX)
+
+ if test -z "$CXX"; then AC_CHECK_PROG(CXX, g++, g++) fi
+ if test -z "$CXX"; then AC_CHECK_PROG(CXX, CC, CC) fi
+ if test -z "$CXX"; then AC_CHECK_PROG(CXX, xlC, xlC) fi
+ if test -z "$CXX"; then AC_CHECK_PROG(CXX, DCC, DCC) fi
+ test -z "$CXX" && AC_MSG_ERROR([no acceptable C++-compiler found in \$PATH])
+
+ AC_PROG_CXX_WORKS
+ AC_PROG_CXX_GNU
+
+ if test $ac_cv_prog_gxx = yes; then
+ GXX=yes
+ fi
+
+ USER_CXXFLAGS=$CXXFLAGS
+ CXXFLAGS=""
+
+ if test -z "$CXXFLAGS"; then
+ if test "$kde_use_debug_code" = "yes"; then
+ AC_PROG_CXX_G
+ if test $ac_cv_prog_cxx_g = yes; then
+ CXXFLAGS="-g"
+ case $host in dnl
+ *-*-linux-gnu)
+ CXXFLAGS="$CXXFLAGS -ansi -D_XOPEN_SOURCE -D_BSD_SOURCE -Wbad-function-cast -Wcast-align -Wundef -Wconversion"
+ ;;
+ esac
+ fi
+ else
+ if test "$GXX" = "yes"; then
+ CXXFLAGS="-O2"
+ fi
+ if test "$kde_use_debug_define" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -DNDEBUG"
+ fi
+ fi
+
+ if test "$kde_use_profiling" = yes; then
+ KDE_PROG_CXX_PG
+ if test "$kde_cv_prog_cxx_pg" = yes; then
+ CXXFLAGS="$CXXFLAGS -pg"
+ fi
+ fi
+
+ KDE_CHECK_COMPILER_FLAG(fno-exceptions,
+ [
+ CXXFLAGS="$CXXFLAGS -fno-exceptions"
+ ])
+
+dnl WABA: Nothing wrong with RTTI, keep it on.
+dnl KDE_CHECK_COMPILER_FLAG(fno-rtti,
+dnl [
+dnl CXXFLAGS="$CXXFLAGS -fno-rtti"
+dnl ])
+
+ KDE_CHECK_COMPILER_FLAG(fno-check-new,
+ [
+ CXXFLAGS="$CXXFLAGS -fno-check-new"
+ ])
+
+ if test "$GXX" = "yes"; then
+ CXXFLAGS="$CXXFLAGS"
+
+ if test true || test "$kde_use_debug_code" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings"
+
+ KDE_CHECK_COMPILER_FLAG(Wno-long-long,
+ [
+ CXXFLAGS="$CXXFLAGS -Wno-long-long"
+ ])
+ KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,
+ [
+ CXXFLAGS="$CXXFLAGS -Wnon-virtual-dtor"
+ ])
+ KDE_CHECK_COMPILER_FLAG(fno-builtin,
+ [
+ CXXFLAGS="$CXXFLAGS -fno-builtin"
+ ])
+
+ fi
+
+ if test "$kde_use_strict_options" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -Wcast-qual -Wbad-function-cast -Wshadow -Wcast-align"
+ fi
+
+ if test "$kde_very_strict" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -Wold-style-cast -Wredundant-decls -Wconversion"
+ fi
+ fi
+ fi
+
+ KDE_CHECK_COMPILER_FLAG(fexceptions,
+ [
+ USE_EXCEPTIONS="-fexceptions"
+ ],
+ USE_EXCEPTIONS=
+ )
+ AC_SUBST(USE_EXCEPTIONS)
+
+ KDE_CHECK_COMPILER_FLAG(frtti,
+ [
+ USE_RTTI="-frtti"
+ ],
+ USE_RTTI=
+ )
+ AC_SUBST(USE_RTTI)
+
+ case "$host" in
+ *-*-irix*) test "$GXX" = yes && CXXFLAGS="$CXXFLAGS -D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS" ;;
+ *-*-sysv4.2uw*) CXXFLAGS="$CXXFLAGS -D_UNIXWARE";;
+ *-*-sysv5uw7*) CXXFLAGS="$CXXFLAGS -D_UNIXWARE7";;
+ *-*-solaris*)
+ if test "$GXX" = yes; then
+ libstdcpp=`gcc -print-file-name=libstdc++.so`
+ if test ! -f $libstdcpp; then
+ AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so])
+ fi
+ fi
+ ;;
+ esac
+
+ if test -n "$USER_CXXFLAGS"; then
+ CXXFLAGS="$CXXFLAGS $USER_CXXFLAGS"
+ fi
+
+ AC_VALIDIFY_CXXFLAGS
+
+ AC_MSG_CHECKING(how to run the C++ preprocessor)
+ if test -z "$CXXCPP"; then
+ AC_CACHE_VAL(ac_cv_prog_CXXCPP,
+ [
+ AC_LANG_SAVE[]dnl
+ AC_LANG_CPLUSPLUS[]dnl
+ CXXCPP="${CXX-g++} -E"
+ AC_TRY_CPP([#include <stdlib.h>], , CXXCPP=/lib/cpp)
+ ac_cv_prog_CXXCPP="$CXXCPP"
+ AC_LANG_RESTORE[]dnl
+ ])dnl
+ CXXCPP="$ac_cv_prog_CXXCPP"
+ fi
+ AC_MSG_RESULT($CXXCPP)
+ AC_SUBST(CXXCPP)dnl
+
+ # the following is to allow programs, that are known to
+ # have problems when compiled with -O2
+ if test -n "$CXXFLAGS"; then
+ kde_safe_IFS=$IFS
+ IFS=" "
+ NOOPT_CXXFLAGS=""
+ for i in $CXXFLAGS; do
+ case $i in
+ -O*)
+ ;;
+ *)
+ NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS $i"
+ ;;
+ esac
+ done
+ IFS=$kde_safe_IFS
+ fi
+ AC_SUBST(NOOPT_CXXFLAGS)
+
+ KDE_CHECK_FINAL
+
+ ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), [])
+
+ KDE_CXXFLAGS=
+ AC_SUBST(KDE_CXXFLAGS)
+])
+
+AC_DEFUN(KDE_ADD_DEPENDENCIES,
+[
+ [A]M_DEPENDENCIES(CC)
+ [A]M_DEPENDENCIES(CXX)
+])
+
+dnl just a wrapper to clean up configure.in
+AC_DEFUN(KDE_PROG_LIBTOOL,
+[
+AC_REQUIRE([AC_CHECK_COMPILERS])
+AC_REQUIRE([AC_ENABLE_SHARED])
+AC_REQUIRE([AC_ENABLE_STATIC])
+
+AC_REQUIRE([AC_LIBTOOL_DLOPEN])
+
+AC_LANG_SAVE
+AC_LANG_C
+AC_OBJEXT
+AC_EXEEXT
+AC_LANG_RESTORE
+
+AM_PROG_LIBTOOL
+AC_LIBTOOL_CXX
+
+LIBTOOL_SHELL="/bin/sh ./libtool"
+# LIBTOOL="$LIBTOOL --silent"
+KDE_PLUGIN="-avoid-version -module -no-undefined"
+AC_SUBST(KDE_PLUGIN)
+])
+
+AC_DEFUN(KDE_CHECK_TYPES,
+[ AC_CHECK_SIZEOF(int, 4)dnl
+ AC_CHECK_SIZEOF(long, 4)dnl
+ AC_CHECK_SIZEOF(char *, 4)dnl
+])dnl
+
+AC_DEFUN(KDE_DO_IT_ALL,
+[
+AC_CANONICAL_SYSTEM
+AC_ARG_PROGRAM
+AM_INIT_AUTOMAKE($1, $2)
+AM_DISABLE_LIBRARIES
+AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde})
+AC_CHECK_COMPILERS
+KDE_PROG_LIBTOOL
+AM_KDE_WITH_NLS
+AC_PATH_KDE
+])
+
+AC_DEFUN(AC_CHECK_RPATH,
+[
+AC_MSG_CHECKING(for rpath)
+AC_ARG_ENABLE(rpath,
+ [ --disable-rpath do not use the rpath feature of ld],
+ USE_RPATH=$enableval, USE_RPATH=yes)
+
+if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then
+
+ KDE_RPATH="-R \$(kde_libraries)"
+
+ if test -n "$qt_libraries"; then
+ KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)"
+ fi
+ dnl $x_libraries is set to /usr/lib in case
+ if test -n "$X_LDFLAGS"; then
+ KDE_RPATH="$KDE_RPATH -R \$(x_libraries)"
+ fi
+ if test -n "$KDE_EXTRA_RPATH"; then
+ KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)"
+ fi
+fi
+AC_SUBST(KDE_EXTRA_RPATH)
+AC_SUBST(KDE_RPATH)
+AC_MSG_RESULT($USE_RPATH)
+])
+
+dnl Check for the type of the third argument of getsockname
+AC_DEFUN(AC_CHECK_KSIZE_T,
+[AC_MSG_CHECKING(for the third argument of getsockname)
+AC_CACHE_VAL(ac_cv_ksize_t,
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+[AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/socket.h>
+],[
+socklen_t a=0;
+getsockname(0,(struct sockaddr*)0, &a);
+],
+ac_cv_ksize_t=socklen_t,
+ac_cv_ksize_t=)
+if test -z "$ac_cv_ksize_t"; then
+ac_safe_cxxflags="$CXXFLAGS"
+if test "$GCC" = "yes"; then
+ CXXFLAGS="-Werror $CXXFLAGS"
+fi
+AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/socket.h>
+],[
+int a=0;
+getsockname(0,(struct sockaddr*)0, &a);
+],
+ac_cv_ksize_t=int,
+ac_cv_ksize_t=size_t)
+CXXFLAGS="$ac_safe_cxxflags"
+fi
+AC_LANG_RESTORE
+])
+
+if test -z "$ac_cv_ksize_t"; then
+ ac_cv_ksize_t=int
+fi
+
+AC_MSG_RESULT($ac_cv_ksize_t)
+AC_DEFINE_UNQUOTED(ksize_t, $ac_cv_ksize_t,
+ [Define the type of the third argument for getsockname]
+)
+
+])
+
+dnl This is a merge of some macros out of the gettext aclocal.m4
+dnl since we don't need anything, I took the things we need
+dnl the copyright for them is:
+dnl >
+dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+dnl This Makefile.in is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+dnl >
+dnl for this file it is relicensed under LGPL
+
+AC_DEFUN(AM_KDE_WITH_NLS,
+ [
+ dnl If we use NLS figure out what method
+
+ AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt,
+ [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+
+ if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then
+ AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it])
+ GMSGFMT=":"
+ fi
+ MSGFMT=$GMSGFMT
+ AC_SUBST(GMSGFMT)
+ AC_SUBST(MSGFMT)
+
+ AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+
+ dnl Test whether we really found GNU xgettext.
+ if test "$XGETTEXT" != ":"; then
+ dnl If it is no GNU xgettext we define it as : so that the
+ dnl Makefiles still can work.
+ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+ : ;
+ else
+ AC_MSG_RESULT(
+ [found xgettext programs is not GNU xgettext; ignore it])
+ XGETTEXT=":"
+ fi
+ fi
+ AC_SUBST(XGETTEXT)
+
+ ])
+
+# Search path for a program which passes the given test.
+# Ulrich Drepper <drepper at cygnus.com>, 1996.
+
+# serial 1
+# Stephan Kulow: I appended a _KDE against name conflicts
+
+dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN(AM_PATH_PROG_WITH_TEST_KDE,
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ /*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test -n "[$]$1"; then
+ AC_MSG_RESULT([$]$1)
+else
+ AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
+
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+# Ulrich Drepper <drepper at cygnus.com>, 1995.
+
+# serial 1
+
+AC_DEFUN(AM_LC_MESSAGES,
+ [if test $ac_cv_header_locale_h = yes; then
+ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+ [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES])
+ fi
+ fi])
+
+dnl From Jim Meyering.
+dnl FIXME: migrate into libit.
+
+AC_DEFUN(AM_FUNC_OBSTACK,
+[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack,
+ [AC_TRY_LINK([#include "obstack.h"],
+ [struct obstack *mem;obstack_free(mem,(char *) 0)],
+ am_cv_func_obstack=yes,
+ am_cv_func_obstack=no)])
+ if test $am_cv_func_obstack = yes; then
+ AC_DEFINE(HAVE_OBSTACK)
+ else
+ LIBOBJS="$LIBOBJS obstack.o"
+ fi
+])
+
+dnl From Jim Meyering. Use this if you use the GNU error.[ch].
+dnl FIXME: Migrate into libit
+
+AC_DEFUN(AM_FUNC_ERROR_AT_LINE,
+[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line,
+ [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");],
+ am_cv_lib_error_at_line=yes,
+ am_cv_lib_error_at_line=no)])
+ if test $am_cv_lib_error_at_line = no; then
+ LIBOBJS="$LIBOBJS error.o"
+ fi
+ AC_SUBST(LIBOBJS)dnl
+])
+
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper at cygnus.com>, 1995.
+
+# serial 1
+# Stephan Kulow: I put a KDE in it to avoid name conflicts
+
+AC_DEFUN(AM_KDE_GNU_GETTEXT,
+ [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_RANLIB])dnl
+ AC_REQUIRE([AC_HEADER_STDC])dnl
+ AC_REQUIRE([AC_TYPE_OFF_T])dnl
+ AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+ AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+ AC_REQUIRE([AC_FUNC_MMAP])dnl
+ AC_REQUIRE([AM_KDE_WITH_NLS])dnl
+ AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h string.h values.h alloca.h])
+ AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
+__argz_count __argz_stringify __argz_next])
+
+ AC_MSG_CHECKING(for stpcpy)
+ AC_CACHE_VAL(kde_cv_func_stpcpy,
+ [
+ kde_safe_cxxflags=$CXXFLAGS
+ CXXFLAGS="-Wmissing-prototypes -Werror"
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_COMPILE([
+ #include <string.h>
+ ],
+ [
+ char buffer[200];
+ stpcpy(buffer, buffer);
+ ],
+ kde_cv_func_stpcpy=yes,
+ kde_cv_func_stpcpy=no)
+ AC_LANG_RESTORE
+ CXXFLAGS=$kde_safe_cxxflags
+ ])
+ AC_MSG_RESULT($kde_cv_func_stpcpy)
+ if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then
+ AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy])
+ fi
+
+ AM_LC_MESSAGES
+
+ if test "x$CATOBJEXT" != "x"; then
+ if test "x$ALL_LINGUAS" = "x"; then
+ LINGUAS=
+ else
+ AC_MSG_CHECKING(for catalogs to be installed)
+ NEW_LINGUAS=
+ for lang in ${LINGUAS=$ALL_LINGUAS}; do
+ case "$ALL_LINGUAS" in
+ *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+ esac
+ done
+ LINGUAS=$NEW_LINGUAS
+ AC_MSG_RESULT($LINGUAS)
+ fi
+
+ dnl Construct list of names of catalog files to be constructed.
+ if test -n "$LINGUAS"; then
+ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+ fi
+ fi
+
+ ])
+
+AC_DEFUN(AC_HAVE_XPM,
+ [AC_REQUIRE_CPP()dnl
+ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+ test -z "$XPM_LDFLAGS" && XPM_LDFLAGS=
+ test -z "$XPM_INCLUDE" && XPM_INCLUDE=
+
+ AC_ARG_WITH(xpm, [ --without-xpm disable color pixmap XPM tests],
+ xpm_test=$withval, xpm_test="yes")
+ if test "x$xpm_test" = xno; then
+ ac_cv_have_xpm=no
+ else
+ AC_MSG_CHECKING(for XPM)
+ AC_CACHE_VAL(ac_cv_have_xpm,
+ [
+ AC_LANG_C
+ ac_save_ldflags="$LDFLAGS"
+ ac_save_cflags="$CFLAGS"
+ LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET"
+ CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES"
+ test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS"
+ AC_TRY_LINK([#include <X11/xpm.h>],[],
+ ac_cv_have_xpm="yes",ac_cv_have_xpm="no")
+ LDFLAGS="$ac_save_ldflags"
+ CFLAGS="$ac_save_cflags"
+ ])dnl
+
+ if test "$ac_cv_have_xpm" = no; then
+ AC_MSG_RESULT(no)
+ XPM_LDFLAGS=""
+ XPMINC=""
+ $2
+ else
+ AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support])
+ if test "$XPM_LDFLAGS" = ""; then
+ XPMLIB='-lXpm $(LIB_X11)'
+ else
+ XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)'
+ fi
+ if test "$XPM_INCLUDE" = ""; then
+ XPMINC=""
+ else
+ XPMINC="-I$XPM_INCLUDE"
+ fi
+ AC_MSG_RESULT(yes)
+ $1
+ fi
+ fi
+ AC_SUBST(XPMINC)
+ AC_SUBST(XPMLIB)
+])
+
+AC_DEFUN(AC_HAVE_DPMS,
+ [AC_REQUIRE_CPP()dnl
+ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+ test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS=
+ test -z "$DPMS_INCLUDE" && DPMS_INCLUDE=
+ DPMS_LIB=
+
+ AC_ARG_WITH(dpms, [ --without-dpms disable DPMS power saving],
+ dpms_test=$withval, dpms_test="yes")
+ if test "x$dpms_test" = xno; then
+ ac_cv_have_dpms=no
+ else
+ AC_MSG_CHECKING(for DPMS)
+ dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms.
+ dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms".
+ AC_CACHE_VAL(ac_cv_have_dpms,
+ [
+ AC_LANG_C
+ ac_save_ldflags="$LDFLAGS"
+ ac_save_cflags="$CFLAGS"
+ ac_save_libs="$LIBS"
+ LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET"
+ CFLAGS="$CFLAGS $X_INCLUDES"
+ test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS"
+ AC_TRY_LINK([
+ #include <X11/Xproto.h>
+ #include <X11/X.h>
+ #include <X11/Xlib.h>
+ #include <X11/extensions/dpms.h>
+ int foo_test_dpms()
+ { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[],
+ ac_cv_have_dpms="yes", [
+ LDFLAGS="$ac_save_ldflags"
+ CFLAGS="$ac_save_cflags"
+ LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET"
+ LIBS="$LIBS -lXdpms"
+ CFLAGS="$CFLAGS $X_INCLUDES"
+ test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS"
+ AC_TRY_LINK([
+ #include <X11/Xproto.h>
+ #include <X11/X.h>
+ #include <X11/Xlib.h>
+ #include <X11/extensions/dpms.h>
+ int foo_test_dpms()
+ { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[],
+ [
+ ac_cv_have_dpms="-lXdpms"
+ ],ac_cv_have_dpms="no")
+ ])
+ LDFLAGS="$ac_save_ldflags"
+ CFLAGS="$ac_save_cflags"
+ LIBS="$ac_save_libs"
+ ])dnl
+
+ if test "$ac_cv_have_dpms" = no; then
+ AC_MSG_RESULT(no)
+ DPMS_LDFLAGS=""
+ DPMSINC=""
+ $2
+ else
+ AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support])
+ if test "$ac_cv_have_dpms" = "-lXdpms"; then
+ DPMS_LIB="-lXdpms"
+ fi
+ if test "$DPMS_LDFLAGS" = ""; then
+ DPMSLIB="$DPMS_LIB "'$(LIB_X11)'
+ else
+ DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)'
+ fi
+ if test "$DPMS_INCLUDE" = ""; then
+ DPMSINC=""
+ else
+ DPMSINC="-I$DPMS_INCLUDE"
+ fi
+ AC_MSG_RESULT(yes)
+ $1
+ fi
+ fi
+ AC_SUBST(DPMSINC)
+ AC_SUBST(DPMSLIB)
+])
+
+AC_DEFUN(AC_HAVE_GL,
+ [AC_REQUIRE_CPP()dnl
+ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+ test -z "$GL_LDFLAGS" && GL_LDFLAGS=
+ test -z "$GL_INCLUDE" && GL_INCLUDE=
+
+ AC_ARG_WITH(gl, [ --without-gl disable 3D GL modes],
+ gl_test=$withval, gl_test="yes")
+ if test "x$gl_test" = xno; then
+ ac_cv_have_gl=no
+ else
+ AC_MSG_CHECKING(for GL)
+ AC_CACHE_VAL(ac_cv_have_gl,
+ [
+ AC_LANG_C
+ ac_save_ldflags="$LDFLAGS"
+ ac_save_cflags="$CFLAGS"
+ LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU -lX11 -lXext -lm $LIBSOCKET"
+ CFLAGS="$CFLAGS $X_INCLUDES"
+ test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS"
+ AC_TRY_LINK([#include <GL/gl.h>
+#include <GL/glu.h>
+], [],
+ ac_cv_have_gl="mesa", ac_cv_have_gl="no")
+ if test "x$ac_cv_have_gl" = "xno"; then
+ LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGL -lGLU -lX11 -lXext -lm $LIBSOCKET"
+ CFLAGS="$ac_save_cflags $X_INCLUDES"
+ test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS"
+ AC_TRY_LINK([#include <GL/gl.h>
+#include <GL/glu.h>
+], [],
+ ac_cv_have_gl="yes", ac_cv_have_gl="no")
+ fi
+ LDFLAGS="$ac_save_ldflags"
+ CFLAGS="$ac_save_cflags"
+ ])dnl
+
+ if test "$ac_cv_have_gl" = "no"; then
+ AC_MSG_RESULT(no)
+ GL_LDFLAGS=""
+ GLINC=""
+ $2
+ else
+ AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)])
+ if test "$GL_LDFLAGS" = ""; then
+ if test "$ac_cv_have_gl" = "mesa"; then
+ GLLIB='-lMesaGL -lMesaGLU $(LIB_X11)'
+ else
+ GLLIB='-lGL -lGLU $(LIB_X11)'
+ fi
+ else
+ if test "$ac_cv_have_gl" = "mesa"; then
+ GLLIB="$GL_LDFLAGS -lMesaGL -lMesaGLU "'$(LIB_X11)'
+ else
+ GLLIB="$GL_LDFLAGS -lGL -lGLU "'$(LIB_X11)'
+ fi
+ fi
+ if test "$GL_INCLUDE" = ""; then
+ GLINC=""
+ else
+ GLINC="-I$GL_INCLUDE"
+ fi
+ AC_MSG_RESULT($ac_cv_have_gl)
+ $1
+ fi
+ fi
+ AC_SUBST(GLINC)
+ AC_SUBST(GLLIB)
+])
+
+ dnl PAM pam
+
+ dnl Should test for PAM (Pluggable Authentication Modules)
+ AC_DEFUN(AC_PATH_PAM_DIRECT,
+ [
+ test -z "$pam_direct_test_library" && pam_direct_test_library=pam
+ test -z "$pam_direct_test_include" && pam_direct_test_include=security/pam_appl.h
+
+ for ac_dir in \
+ \
+ /usr/local/include \
+ /usr/include \
+ /usr/unsupported/include \
+ /opt/include \
+ /usr/pam/include \
+ /usr/local/pam/include \
+ /usr/lib/pam/include \
+ \
+ $extra_include \
+ ; \
+ do
+ if test -r "$ac_dir/$pam_direct_test_include"; then
+ no_pam= ac_pam_includes=$ac_dir
+ break
+ fi
+ done
+
+ # First see if replacing the include by lib works.
+ for ac_dir in `echo "$ac_pam_includes" | sed s/include/lib/` \
+ \
+ /lib \
+ /usr/lib \
+ /usr/local/lib \
+ /usr/unsupported/lib \
+ /lib/security \
+ /usr/security/lib \
+ $extra_lib \
+ ; \
+ do
+ for ac_extension in a so sl; do
+ if test -r $ac_dir/lib${pam_direct_test_library}.$ac_extension; then
+ no_pam= ac_pam_libraries=$ac_dir
+ break 2
+ fi
+ done
+ done
+])
+
+AC_DEFUN(AC_PATH_PAM,
+ [
+ AC_REQUIRE([KDE_CHECK_LIBDL])
+ AC_REQUIRE_CPP()dnl
+
+dnl AC_CHECK_LIB(pam_misc, main, [PAM_MISC_LIB="-lpam_misc"
+dnl AC_DEFINE_UNQUOTED(HAVE_PAM_MISC, 1, [Define if you have a PAM implementation with the pam_misc library])], [], [-lpam $LIBDL])
+
+ AC_MSG_CHECKING(for PAM)
+ AC_ARG_WITH(pam,
+[ --with-pam[=ARG] enable support for PAM: ARG=[yes|no|service name]],
+ [
+ if test "x$withval" = "xyes"; then
+ no_pam=
+ default_pam=yes
+ elif test "x$withval" = "xno"; then
+ no_pam=yes
+ else
+ no_pam=
+ pam_service="$withval"
+ if test -z "$pam_service"; then
+ default_pam=yes
+ else
+ default_pam=
+ fi
+ fi
+ ], no_pam=yes
+ )
+
+ if test ! "$no_pam" = yes; then
+
+ AC_CACHE_VAL(ac_cv_path_pam,
+ [
+ ac_pam_includes=NONE
+ ac_pam_libraries=NONE
+ if test -z "$pam_libraries"; then
+ pam_libraries=NONE
+ fi
+ if test -z "$pam_includes"; then
+ pam_includes=NONE
+ fi
+
+ AC_PATH_PAM_DIRECT
+
+ test "x$pam_includes" = xNONE && pam_includes=$ac_pam_includes
+ test "x$pam_libraries" = xNONE && pam_libraries=$ac_pam_libraries
+
+ if test ! "x$pam_includes" = xNONE && test ! "x$pam_libraries" = xNONE; then
+ ac_pam_libs="-lpam $PAM_MISC_LIB $LIBDL"
+ ac_cv_path_pam="no_pam= ac_pam_includes=$ac_pam_includes ac_pam_libraries=$ac_pam_libraries ac_pam_libs=\"$ac_pam_libs\""
+ else
+ ac_cv_path_pam="no_pam=yes"
+ fi
+ ])
+
+ eval "$ac_cv_path_pam"
+
+ fi
+
+ if test "$no_pam" = yes; then
+ AC_MSG_RESULT(no)
+ else
+ AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules); Redhat-Users!])
+ PAMLIBS="$ac_pam_libs"
+ test "x$pam_includes" = xNONE && pam_includes=$ac_pam_includes
+ test "x$pam_libraries" = xNONE && pam_libraries=$ac_pam_libraries
+ AC_MSG_RESULT([libraries $pam_libraries, headers $pam_includes])
+ if test "$default_pam" = yes; then
+ AC_MSG_RESULT(["default pam service name will be used"])
+ else
+ AC_DEFINE_UNQUOTED(KDE_PAM_SERVICE,"$pam_service", [Define to change the default name of the PAM service used by KDE])
+ AC_MSG_RESULT(["pam service name will be: " $pam_service])
+ fi
+dnl test whether struct pam_message is const (Linux) or not (Sun)
+ pam_appl_h="$ac_pam_includes/security/pam_appl.h"
+ AC_MSG_CHECKING(for const pam_message)
+ AC_EGREP_HEADER([struct pam_message],
+ $pam_appl_h,
+ [ AC_EGREP_HEADER([const struct pam_message],
+ $pam_appl_h,
+ [AC_MSG_RESULT(["const: Linux-type PAM"]) ],
+ [AC_MSG_RESULT(["nonconst: Sun-type PAM"])
+ AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])]
+ )],
+ [AC_MSG_RESULT(["not found - assume const, Linux-type PAM"])]
+ )
+ fi
+
+ if test "x$pam_libraries" != x && test "x$pam_libraries" != xNONE ; then
+ PAMLIBPATHS="-L$pam_libraries"
+ fi
+ if test "x$pam_includes" != x && test "x$pam_includes" != xNONE ; then
+ PAMINC="-I$pam_includes"
+ fi
+
+ AC_SUBST(PAMINC)
+ AC_SUBST(PAMLIBS)
+ AC_SUBST(PAMLIBPATHS)
+
+])
+
+AC_DEFUN(KDE_CHECK_LIBDL,
+[
+AC_CHECK_LIB(dl, dlopen, [
+LIBDL="-ldl"
+ac_cv_have_dlfcn=yes
+])
+
+AC_CHECK_LIB(dld, shl_unload, [
+LIBDL="-ldld"
+ac_cv_have_shload=yes
+])
+
+AC_SUBST(LIBDL)
+])
+
+AC_DEFUN(KDE_CHECK_DLOPEN,
+[
+KDE_CHECK_LIBDL
+AC_CHECK_HEADERS(dlfcn.h dl.h)
+if test "$ac_cv_header_dlfcn_h" = "no"; then
+ ac_cv_have_dlfcn=no
+fi
+
+if test "$ac_cv_header_dl_h" = "no"; then
+ ac_cv_have_shload=no
+fi
+
+dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE
+dnl (MM)
+AC_ARG_ENABLE(dlopen,
+[ --disable-dlopen link statically [default=no]] ,
+enable_dlopen=$enableval,
+enable_dlopen=yes)
+
+# override the user's opinion, if we know it better ;)
+if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then
+ enable_dlopen=no
+fi
+
+if test "$ac_cv_have_dlfcn" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn])
+fi
+
+if test "$ac_cv_have_shload" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload])
+fi
+
+if test "$enable_dlopen" = no ; then
+ test -n "$1" && eval $1
+else
+ test -n "$2" && eval $2
+fi
+
+])
+
+AC_DEFUN(KDE_CHECK_DYNAMIC_LOADING,
+[
+KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no)
+KDE_PROG_LIBTOOL
+AC_MSG_CHECKING([dynamic loading])
+eval "`egrep '^build_libtool_libs=' libtool`"
+if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then
+ dynamic_loading=yes
+ AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING)
+else
+ dynamic_loading=no
+fi
+AC_MSG_RESULT($dynamic_loading)
+if test "$dynamic_loading" = "yes"; then
+ $1
+else
+ $2
+fi
+])
+
+AC_DEFUN(KDE_ADD_INCLUDES,
+[
+if test -z "$1"; then
+ test_include="Pix.h"
+else
+ test_include="$1"
+fi
+
+AC_MSG_CHECKING([for libg++ ($test_include)])
+
+AC_CACHE_VAL(kde_cv_libgpp_includes,
+[
+kde_cv_libgpp_includes=no
+
+ for ac_dir in \
+ \
+ /usr/include/g++ \
+ /usr/include \
+ /usr/unsupported/include \
+ /opt/include \
+ $extra_include \
+ ; \
+ do
+ if test -r "$ac_dir/$test_include"; then
+ kde_cv_libgpp_includes=$ac_dir
+ break
+ fi
+ done
+])
+
+AC_MSG_RESULT($kde_cv_libgpp_includes)
+if test "$kde_cv_libgpp_includes" != "no"; then
+ all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES"
+fi
+])
+])
+
+
+AC_DEFUN(KDE_CHECK_MICO,
+[
+AC_REQUIRE([KDE_CHECK_LIBDL])
+AC_REQUIRE([KDE_MISC_TESTS])
+AC_MSG_CHECKING(for MICO)
+
+if test -z "$MICODIR"; then
+ kde_micodir=/usr/local
+ else
+ kde_micodir="$MICODIR"
+fi
+
+AC_ARG_WITH(micodir,
+ [ --with-micodir=micodir where mico is installed ],
+ kde_micodir=$withval,
+ kde_micodir=$kde_micodir
+)
+
+AC_CACHE_VAL(kde_cv_mico_incdir,
+[
+ mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes"
+AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir)
+
+])
+kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'`
+
+if test ! -r $kde_micodir/include/CORBA.h; then
+ AC_MSG_ERROR([No CORBA.h found, specify another micodir])
+fi
+
+AC_MSG_RESULT($kde_micodir)
+
+MICO_INCLUDES=-I$kde_micodir/include
+AC_SUBST(MICO_INCLUDES)
+MICO_LDFLAGS=-L$kde_micodir/lib
+AC_SUBST(MICO_LDFLAGS)
+micodir=$kde_micodir
+AC_SUBST(micodir)
+
+AC_MSG_CHECKING([for MICO version])
+AC_CACHE_VAL(kde_cv_mico_version,
+[
+AC_LANG_C
+cat >conftest.$ac_ext <<EOF
+#include <stdio.h>
+#include <mico/version.h>
+int main() {
+
+ printf("MICO_VERSION=%s\n",MICO_VERSION);
+ return (0);
+}
+EOF
+ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest'
+if AC_TRY_EVAL(ac_compile); then
+ if eval `./conftest 2>&5`; then
+ kde_cv_mico_version=$MICO_VERSION
+ else
+ AC_MSG_ERROR([your system is not able to execute a small application to
+ find MICO version! Check $kde_micodir/include/mico/version.h])
+ fi
+else
+ AC_MSG_ERROR([your system is not able to compile a small application to
+ find MICO version! Check $kde_micodir/include/mico/version.h])
+fi
+])
+
+dnl installed MICO version
+mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
+mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
+mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
+
+if test "x$1" = "x"; then
+ req_version="2.3.0"
+else
+ req_version=$1
+fi
+
+dnl required MICO version
+req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
+req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
+req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
+
+if test "$mico_v_maj" -lt "$req_v_maj" || \
+ ( test "$mico_v_maj" -eq "$req_v_maj" && \
+ test "$mico_v_mid" -lt "$req_v_mid" ) || \
+ ( test "$mico_v_mid" -eq "$req_v_mid" && \
+ test "$mico_v_min" -lt "$req_v_min" )
+
+then
+ AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \
+at least is required. You should upgrade MICO.])
+else
+ AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)])
+fi
+
+LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL"
+AC_SUBST(LIBMICO)
+if test -z "$IDL"; then
+ IDL='$(kde_bindir)/cuteidl'
+fi
+AC_SUBST(IDL)
+IDL_DEPENDENCIES='$(kde_includes)/CUTE.h'
+AC_SUBST(IDL_DEPENDENCIES)
+
+idldir="\$(includedir)/idl"
+AC_SUBST(idldir)
+
+])
+
+AC_DEFUN(KDE_CHECK_MINI_STL,
+[
+AC_REQUIRE([KDE_CHECK_MICO])
+
+AC_MSG_CHECKING(if we use mico's mini-STL)
+AC_CACHE_VAL(kde_cv_have_mini_stl,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+kde_save_cxxflags="$CXXFLAGS"
+CXXFLAGS="$CXXFLAGS $MICO_INCLUDES"
+AC_TRY_COMPILE(
+[
+#include <mico/config.h>
+],
+[
+#ifdef HAVE_MINI_STL
+#error "nothing"
+#endif
+],
+kde_cv_have_mini_stl=no,
+kde_cv_have_mini_stl=yes)
+CXXFLAGS="$kde_save_cxxflags"
+AC_LANG_RESTORE
+])
+
+if test "x$kde_cv_have_mini_stl" = "xyes"; then
+ AC_MSG_RESULT(yes)
+ $1
+else
+ AC_MSG_RESULT(no)
+ $2
+fi
+])
+
+])
+
+
+AC_DEFUN(KDE_CHECK_LIBPTHREAD,
+[
+AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] )
+AC_SUBST(LIBPTHREAD)
+])
+
+AC_DEFUN(KDE_CHECK_PTHREAD_OPTION,
+[
+ AC_ARG_ENABLE(kernel-threads, [ --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only.],
+ kde_use_kernthreads=$enableval, kde_use_kernthreads=no)
+
+ if test "$kde_use_kernthreads" = "yes"; then
+ ac_save_CXXFLAGS="$CXXFLAGS"
+ ac_save_CFLAGS="$CXXFLAGS"
+ CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS"
+ CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS"
+ AC_CHECK_HEADERS(pthread/linuxthreads/pthread.h)
+ CXXFLAGS="$ac_save_CXXFLAGS"
+ CFLAGS="$ac_save_CFLAGS"
+ if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then
+ kde_use_kernthreads=no
+ else
+ dnl Add proper -I and -l statements
+ AC_CHECK_LIB(lthread, pthread_join, [LIBPTHREAD="-llthread -llgcc_r"]) dnl for FreeBSD
+ if test "x$LIBPTHREAD" = "x"; then
+ kde_use_kernthreads=no
+ else
+ USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads"
+ fi
+ fi
+ else
+ USE_THREADS=""
+ if test -z "$LIBPTHREAD"; then
+ KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-pthread"] )
+ fi
+ fi
+
+ case $host_os in
+ solaris*)
+ KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"])
+ CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS"
+ echo "Setting Solaris pthread compilation options"
+ ;;
+ freebsd*)
+ CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
+ echo "Setting FreeBSD pthread compilation options"
+ ;;
+ aix*)
+ CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
+ LIBPTHREAD="$LIBPTHREAD -lc_r"
+ echo "Setting AIX pthread compilation options"
+ ;;
+ linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT"
+ USE_THREADS="$USE_THREADS -DPIC -fPIC"
+ echo "Setting Linux pthread compilation options"
+ ;;
+ *)
+ ;;
+ esac
+ AC_SUBST(USE_THREADS)
+ AC_SUBST(LIBPTHREAD)
+])
+
+AC_DEFUN(KDE_CHECK_THREADING,
+[
+ AC_REQUIRE([KDE_CHECK_LIBPTHREAD])
+ AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION])
+ dnl default is yes if libpthread is found and no if no libpthread is available
+ if test -z "$LIBPTHREAD"; then
+ kde_check_threading_default=no
+ else
+ kde_check_threading_default=yes
+ fi
+ AC_ARG_ENABLE(threading, [ --disable-threading disables threading even if libpthread found ],
+ kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default)
+
+ if test "x$kde_use_threading" = "xyes"; then
+ AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)])
+ fi
+])
+
+AC_DEFUN(KDE_TRY_LINK_PYTHON,
+[
+if test "$kde_python_link_found" = no; then
+
+if test "$1" = normal; then
+ AC_MSG_CHECKING(if a Python application links)
+else
+ AC_MSG_CHECKING(if Python depends on $2)
+fi
+
+AC_CACHE_VAL(kde_cv_try_link_python_$1,
+[
+AC_LANG_SAVE
+AC_LANG_C
+kde_save_cflags="$CFLAGS"
+CFLAGS="$CFLAGS $PYTHONINC"
+kde_save_libs="$LIBS"
+LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET"
+kde_save_ldflags="$LDFLAGS"
+LDFLAGS="$LDFLAGS $PYTHONLIB"
+
+AC_TRY_LINK(
+[
+#include <Python.h>
+],[
+ PySys_SetArgv(1, 0);
+],
+ [kde_cv_try_link_python_$1=yes],
+ [kde_cv_try_link_python_$1=no]
+)
+CFLAGS="$kde_save_cflags"
+LIBS="$kde_save_libs"
+LDFLAGS="$kde_save_ldflags"
+])
+
+if test "$kde_cv_try_link_python_$1" = "yes"; then
+ AC_MSG_RESULT(yes)
+ kde_python_link_found=yes
+ if test ! "$1" = normal; then
+ LIBPYTHON="$LIBPYTHON $2"
+ fi
+ $3
+else
+ AC_MSG_RESULT(no)
+ $4
+fi
+AC_LANG_RESTORE
+
+fi
+
+])
+
+AC_DEFUN(KDE_CHECK_PYTHON,
+[
+AC_REQUIRE([KDE_CHECK_LIBDL])
+AC_REQUIRE([KDE_CHECK_LIBPTHREAD])
+
+AC_MSG_CHECKING([for Python directory])
+
+AC_CACHE_VAL(kde_cv_pythondir,
+[
+ if test -z "$PYTHONDIR"; then
+ kde_cv_pythondir=/usr/local
+ else
+ kde_cv_pythondir="$PYTHONDIR"
+ fi
+])
+
+AC_ARG_WITH(pythondir,
+[ --with-pythondir=pythondir use python installed in pythondir ],
+[
+ ac_python_dir=$withval
+], ac_python_dir=$kde_cv_pythondir
+)
+
+AC_MSG_RESULT($ac_python_dir)
+
+if test -z "$1"; then
+ version="1.5"
+else
+ version="$1"
+fi
+
+AC_MSG_CHECKING([for Python$version])
+
+python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes"
+AC_FIND_FILE(Python.h, $python_incdirs, python_incdir)
+if test ! -r $python_incdir/Python.h; then
+ AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir)
+ python_incdir=$python_incdir/python$version
+ if test ! -r $python_incdir/Python.h; then
+ AC_MSG_ERROR(Python.h not found.)
+ fi
+fi
+
+PYTHONINC=-I$python_incdir
+
+python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs"
+AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir)
+if test ! -r $python_libdir/libpython$version.a; then
+ AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir)
+ python_libdir=$python_libdir/python$version/config
+ if test ! -r $python_libdir/libpython$version.a; then
+ AC_MSG_ERROR(libpython$version.a not found.)
+ fi
+fi
+
+PYTHONLIB=-L$python_libdir
+if test -z "$LIBPYTHON"; then
+LIBPYTHON=-lpython$version
+fi
+
+python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs"
+AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir)
+python_moddir=$python_moddir/python$version
+if test ! -r $python_moddir/copy.py; then
+ AC_MSG_ERROR(python module directory not found.)
+fi
+
+PYTHONMODDIR=$python_moddir
+
+AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir)
+
+dnl Note: this test is very weak
+kde_python_link_found=no
+KDE_TRY_LINK_PYTHON(normal)
+KDE_TRY_LINK_PYTHON(m, -lm)
+KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD)
+KDE_TRY_LINK_PYTHON(tcl, -ltcl)
+KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm], [],
+ [AC_MSG_WARN([it seems, Python depends on another library.
+ Pleae use \"make LIBPTYHON='-lpython$version -lotherlib'\" to fix this
+ and contact the authors to let them know about this problem])
+ ])
+
+LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET"
+AC_SUBST(PYTHONINC)
+AC_SUBST(PYTHONLIB)
+AC_SUBST(LIBPYTHON)
+AC_SUBST(PYTHONMODDIR)
+
+])
+
+
+AC_DEFUN(KDE_CHECK_STL_SGI,
+[
+ AC_MSG_CHECKING([if STL implementation is SGI like])
+ AC_CACHE_VAL(kde_cv_stl_type_sgi,
+ [
+ AC_TRY_COMPILE([
+#include <string>
+using namespace std;
+],[
+ string astring="Hallo Welt.";
+ astring.erase(0, 6); // now astring is "Welt"
+ return 0;
+], kde_cv_stl_type_sgi=yes,
+ kde_cv_stl_type_sgi=no)
+])
+
+ AC_MSG_RESULT($kde_cv_stl_type_sgi)
+
+ if test "$kde_cv_stl_type_sgi" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI])
+ fi
+])
+
+AC_DEFUN(KDE_CHECK_STL_HP,
+[
+ AC_MSG_CHECKING([if STL implementation is HP like])
+ AC_CACHE_VAL(kde_cv_stl_type_hp,
+ [
+ AC_TRY_COMPILE([
+#include <string>
+using namespace std;
+],[
+ string astring="Hello World";
+ astring.remove(0, 6); // now astring is "World"
+ return 0;
+], kde_cv_stl_type_hp=yes,
+ kde_cv_stl_type_hp=no)
+])
+ AC_MSG_RESULT($kde_cv_stl_type_hp)
+
+ if test "$kde_cv_stl_type_hp" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_HP_STL, 1, [Define if you have a STL implementation by SGI])
+ fi
+])
+
+AC_DEFUN(KDE_CHECK_STL,
+[
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ ac_save_CXXFLAGS="$CXXFLAGS"
+ CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`"
+ KDE_CHECK_STL_SGI
+
+ if test "$kde_cv_stl_type_sgi" = "no"; then
+ KDE_CHECK_STL_HP
+
+ if test "$kde_cv_stl_type_hp" = "no"; then
+ AC_MSG_ERROR("no known STL type found")
+ fi
+ fi
+
+ CXXFLAGS="$ac_save_CXXFLAGS"
+ AC_LANG_RESTORE
+])
+
+AC_DEFUN(AC_FIND_QIMGIO,
+ [AC_REQUIRE([AC_FIND_JPEG])
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+AC_MSG_CHECKING([for qimgio])
+AC_CACHE_VAL(ac_cv_lib_qimgio,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_save_LIBS="$LIBS"
+ac_save_CXXFLAGS="$CXXFLAGS"
+LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT"
+CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
+AC_TRY_RUN(dnl
+[
+#include <qimageio.h>
+#include <qstring.h>
+int main() {
+ QString t = "hallo";
+ t.fill('t');
+ qInitImageIO();
+}
+],
+ ac_cv_lib_qimgio=yes,
+ ac_cv_lib_qimgio=no,
+ ac_cv_lib_qimgio=no)
+LIBS="$ac_save_LIBS"
+CXXFLAGS="$ac_save_CXXFLAGS"
+AC_LANG_RESTORE
+])dnl
+if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then
+ LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG"
+ AC_MSG_RESULT(yes)
+ AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available])
+ AC_SUBST(LIBQIMGIO)
+else
+ AC_MSG_RESULT(not found)
+fi
+])
+
+AC_DEFUN(KDE_CHECK_ANSI,
+[
+])
+
+AC_DEFUN(KDE_CHECK_INSURE,
+[
+ AC_ARG_ENABLE(insure, [ --enable-insure use insure++ for debugging [default=no]],
+ [
+ if test $enableval = "no"; dnl
+ then ac_use_insure="no"
+ else ac_use_insure="yes"
+ fi
+ ], [ac_use_insure="no"])
+
+ AC_MSG_CHECKING(if we will use Insure++ to debug)
+ AC_MSG_RESULT($ac_use_insure)
+ if test "$ac_use_insure" = "yes"; dnl
+ then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "????
+ fi
+])
+
+AC_DEFUN(AM_DISABLE_LIBRARIES,
+[
+ AC_PROVIDE([AM_ENABLE_STATIC])
+ AC_PROVIDE([AM_ENABLE_SHARED])
+ enable_static=no
+ enable_shared=yes
+])
+
+
+AC_DEFUN(AC_CHECK_UTMP_FILE,
+[
+ AC_MSG_CHECKING([for utmp file])
+
+ AC_CACHE_VAL(kde_cv_utmp_file,
+ [
+ kde_cv_utmp_file=no
+
+ for ac_file in \
+ \
+ /var/run/utmp \
+ /var/adm/utmp \
+ /etc/utmp \
+ ; \
+ do
+ if test -r "$ac_file"; then
+ kde_cv_utmp_file=$ac_file
+ break
+ fi
+ done
+ ])
+
+ if test "$kde_cv_utmp_file" != "no"; then
+ AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries])
+ $1
+ AC_MSG_RESULT($kde_cv_utmp_file)
+ else
+ $2
+ AC_MSG_RESULT([non found])
+ fi
+])
+
+
+AC_DEFUN(KDE_CREATE_SUBDIRSLIST,
+[
+
+DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin"
+
+if test ! -s $srcdir/subdirs; then
+ dnl Note: Makefile.common creates subdirs, so this is just a fallback
+ TOPSUBDIRS=""
+ files=`cd $srcdir && ls -1`
+ dirs=`for i in $files; do if test -d $i; then echo $i; fi; done`
+ for i in $dirs; do
+ echo $i >> $srcdir/subdirs
+ done
+fi
+
+if test -s $srcdir/inst-apps; then
+ ac_topsubdirs="`cat $srcdir/inst-apps`"
+else
+ ac_topsubdirs="`cat $srcdir/subdirs`"
+fi
+
+for i in $ac_topsubdirs; do
+ AC_MSG_CHECKING([if $i should be compiled])
+ if test -d $srcdir/$i; then
+ install_it="yes"
+ for j in $DO_NOT_COMPILE; do
+ if test $i = $j; then
+ install_it="no"
+ fi
+ done
+ else
+ install_it="no"
+ fi
+ AC_MSG_RESULT($install_it)
+ if test $install_it = "yes"; then
+ TOPSUBDIRS="$TOPSUBDIRS $i"
+ fi
+done
+
+AC_SUBST(TOPSUBDIRS)
+])
+
+AC_DEFUN(KDE_CHECK_NAMESPACES,
+[
+AC_MSG_CHECKING(whether C++ compiler supports namespaces)
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+AC_TRY_COMPILE([
+],
+[
+namespace Foo {
+ extern int i;
+ namespace Bar {
+ extern int i;
+ }
+}
+
+int Foo::i = 0;
+int Foo::Bar::i = 1;
+],[
+ AC_MSG_RESULT(yes)
+ AC_DEFINE(HAVE_NAMESPACES)
+], [
+AC_MSG_RESULT(no)
+])
+AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_CHECK_NEWLIBS,
+[
+
+])
+
+dnl ------------------------------------------------------------------------
+dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure at kde.org
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_CHECK_S_ISSOCK,
+[
+AC_MSG_CHECKING(for S_ISSOCK)
+AC_CACHE_VAL(ac_cv_have_s_issock,
+[
+AC_LANG_SAVE
+AC_LANG_C
+AC_TRY_LINK(
+[
+#include <sys/stat.h>
+],
+[
+struct stat buff;
+int b = S_ISSOCK( buff.st_mode );
+],
+ac_cv_have_s_issock=yes,
+ac_cv_have_s_issock=no)
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_have_s_issock)
+if test "$ac_cv_have_s_issock" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.])
+fi
+])
+
+dnl ------------------------------------------------------------------------
+dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure at kde.org
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_CHECK_KDEMAXPATHLEN,
+[
+AC_MSG_CHECKING(for MAXPATHLEN)
+AC_CACHE_VAL(ac_cv_maxpathlen,
+[
+AC_LANG_C
+cat > conftest.$ac_ext <<EOF
+#include <stdio.h>
+#include <sys/param.h>
+#ifndef MAXPATHLEN
+#define MAXPATHLEN 1024
+#endif
+
+KDE_HELLO MAXPATHLEN
+
+EOF
+
+ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out"
+
+if AC_TRY_EVAL(ac_try) && test -s conftest.out; then
+ ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out`
+else
+ ac_cv_maxpathlen=1024
+fi
+
+rm conftest.*
+
+])
+AC_MSG_RESULT($ac_cv_maxpathlen)
+AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] )
+])
+
+dnl -------------------------------------------------------------------------
+dnl See if the compiler supports a template repository bero at redhat.de
+dnl -------------------------------------------------------------------------
+AC_DEFUN(KDE_COMPILER_REPO,
+[
+ REPO=""
+ NOREPO=""
+
+ KDE_CHECK_COMPILER_FLAG(frepo,
+ [
+ REPO="-frepo"
+ NOREPO="-fno-repo"
+ ])
+
+ if test -z "$REPO"; then
+ KDE_CHECK_COMPILER_FLAG(instances=explicit,
+ [
+ REPO="-instances=explicit"
+ NOREPO="-instances=extern"
+ ])
+ fi
+
+ if test -n "$REPO"; then
+ AC_DEFINE_UNQUOTED(HAVE_TEMPLATE_REPOSITORY, 1,
+ [C++ compiler supports template repository])
+ $1
+ fi
+
+ AC_SUBST(REPO)
+ AC_SUBST(NOREPO)
+])
+
+AC_DEFUN(KDE_CHECK_HEADER,
+[
+ AC_LANG_SAVE
+ kde_safe_cppflags=$CPPFLAGS
+ CPPFLAGS="$CPPFLAGS $all_includes"
+ AC_LANG_CPLUSPLUS
+ AC_CHECK_HEADER($1, $2, $3)
+ CPPFLAGS=$kde_safe_cppflags
+ AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_CHECK_QWSPRITEFIELD,
+[
+ KDE_CHECK_HEADER(QwSpriteField.h, ,
+ [
+ AC_MSG_WARN([you don't have QwSpriteField.h somewhere. Please install
+ QwSpriteField out of kdesupport.])
+ $1
+ ])
+])
+
+AC_DEFUN(KDE_FAST_CONFIGURE,
+[
+ dnl makes configure fast (needs perl)
+ AC_ARG_ENABLE(fast-perl, [ --disable-fast-perl disable fast Makefile generation (needs perl)],
+ with_fast_perl=$enableval, with_fast_perl=yes)
+])
+
+AC_DEFUN(KDE_CONF_FILES,
+[
+ val=
+ if test -f $srcdir/configure.files ; then
+ val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files`
+ fi
+ CONF_FILES=
+ if test -n "$val" ; then
+ for i in $val ; do
+ CONF_FILES="$CONF_FILES $i"
+ done
+ fi
+ AC_SUBST(CONF_FILES)
+])dnl
+
+AC_DEFUN(KDE_SET_PREFIX,
+[
+ unset CDPATH
+ dnl make $KDEDIR the default for the installation
+ AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde})
+
+ if test "x$prefix" = "xNONE"; then
+ prefix=$ac_default_prefix
+ ac_configure_args="$ac_configure_args --prefix $prefix"
+ fi
+ KDE_FAST_CONFIGURE
+ KDE_CONF_FILES
+])
+
+pushdef([AC_PROG_INSTALL],
+[
+ dnl our own version, testing for a -p flag
+ popdef([AC_PROG_INSTALL])
+ dnl as AC_PROG_INSTALL works as it works we first have
+ dnl to save if the user didn't specify INSTALL, as the
+ dnl autoconf one overwrites INSTALL and we have no chance to find
+ dnl out afterwards
+ test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL
+ test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM
+ test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT
+ AC_PROG_INSTALL
+
+ if test -z "$kde_save_INSTALL_given" ; then
+ # OK, user hasn't given any INSTALL, autoconf found one for us
+ # now we test, if it supports the -p flag
+ AC_MSG_CHECKING(for -p flag to install)
+ rm -f confinst.$$.* > /dev/null 2>&1
+ echo "Testtest" > confinst.$$.orig
+ ac_res=no
+ if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then
+ if test -f confinst.$$.new ; then
+ # OK, -p seems to do no harm to install
+ INSTALL="${INSTALL} -p"
+ ac_res=yes
+ fi
+ fi
+ rm -f confinst.$$.*
+ AC_MSG_RESULT($ac_res)
+ fi
+ dnl the following tries to resolve some signs and wonders coming up
+ dnl with different autoconf/automake versions
+ dnl e.g.:
+ dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s
+ dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS)
+ dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s
+ dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has
+ dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the
+ dnl install- at DIR@PROGRAMS targets to explicitly use that flag
+ dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as
+ dnl INSTALL_SCRIPT, which breaks with automake <= 1.4
+ dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure
+ dnl *sometimes KDE does not use the install- at DIR@PROGRAM targets from
+ dnl automake (due to broken Makefile.am or whatever) to install programs,
+ dnl and so does not see the -s flag in automake > 1.4
+ dnl to clean up that mess we:
+ dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG
+ dnl which cleans KDE's program with automake > 1.4;
+ dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems
+ dnl with automake<=1.4
+ dnl note that dues to this sometimes two '-s' flags are used (if KDE
+ dnl properly uses install- at DIR@PROGRAMS, but I don't care
+ dnl
+ dnl And to all this comes, that I even can't write in comments variable
+ dnl names used by automake, because it is so stupid to think I wanted to
+ dnl _use_ them, therefor I have written A_M_... instead of AM_
+ dnl hmm, I wanted to say something ... ahh yes: Arghhh.
+
+ if test -z "$kde_save_INSTALL_PROGRAM_given" ; then
+ INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)'
+ fi
+ if test -z "$kde_save_INSTALL_SCRIPT_given" ; then
+ INSTALL_SCRIPT='${INSTALL}'
+ fi
+])dnl
+
+AC_DEFUN(KDE_LANG_CPLUSPLUS,
+[AC_LANG_CPLUSPLUS
+ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC'
+pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS])
+])
+
+pushdef([AC_LANG_CPLUSPLUS],
+[popdef([AC_LANG_CPLUSPLUS])
+KDE_LANG_CPLUSPLUS
+])
+
+AC_DEFUN(KDE_CHECK_LONG_LONG,
+[
+AC_MSG_CHECKING(for long long)
+AC_CACHE_VAL(kde_cv_c_long_long,
+[
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_LINK([], [
+ long long foo = 0;
+ foo = foo+1;
+ ],
+ kde_cv_c_long_long=yes, kde_cv_c_long_long=no)
+])
+AC_MSG_RESULT($kde_cv_c_long_long)
+if test "$kde_cv_c_long_long" = yes; then
+ AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype])
+fi
+])
+
+
+# serial 46 AC_PROG_LIBTOOL
+AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
+ AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [AC_LIBTOOL_CXX],
+ [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
+])])
+
+dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
+dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
+ AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [AC_LIBTOOL_GCJ],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [AC_LIBTOOL_GCJ],
+ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
+ [AC_LIBTOOL_GCJ],
+ [ifdef([AC_PROG_GCJ],
+ [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
+])])
+ ifdef([A][M_PROG_GCJ],
+ [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
+])])
+ ifdef([LT_AC_PROG_GCJ],
+ [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
+])])])])])])
+
+AC_DEFUN([_AC_PROG_LIBTOOL],
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+
+# Save cache, so that ltconfig can load it
+AC_CACHE_SAVE
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Reload cache, that may have been modified by ltconfig
+AC_CACHE_LOAD
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+AC_DEFUN([AC_LIBTOOL_SETUP],
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+AC_REQUIRE([AC_OBJEXT])dnl
+AC_REQUIRE([AC_EXEEXT])dnl
+dnl
+
+# Only perform the check for file, if the check method requires it
+case "$deplibs_check_method" in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ AC_PATH_MAGIC
+ fi
+ ;;
+esac
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+AC_ARG_WITH(pic,
+ [ --with-pic try to use only PIC/non-PIC objects [default=use both]],
+ pic_mode="$withval", pic_mode=default)
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$host" in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case "`/usr/bin/file conftest.$ac_objext`" in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_SAVE
+ AC_LANG_C
+ AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_RESTORE])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+
+ # recent cygwin and mingw systems supply a stub DllMain which the user
+ # can override, but on older systems we have to supply one
+ AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
+ [AC_TRY_LINK([],
+ [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
+ DllMain (0, 0, 0);],
+ [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
+
+ case "$host/$CC" in
+ *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
+ # old mingw systems require "-dll" to link a DLL, while more recent ones
+ # require "-mdll"
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -mdll"
+ AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
+ [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
+ CFLAGS="$SAVE_CFLAGS" ;;
+ *-*-cygwin* | *-*-pw32*)
+ # cygwin systems need to pass --dll to the linker, and not link
+ # crt.o which will require a WinMain at 16 definition.
+ lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
+ esac
+ ;;
+ ])
+esac
+])
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_LIBTOOL_PICMODE - implement the --with-pic flag
+# Usage: AC_LIBTOOL_PICMODE[(MODE)]
+# Where MODE is either `yes' or `no'. If omitted, it defaults to
+# `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)])
+
+
+# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case "$MAGIC_CMD" in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="ifelse([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$1; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -n "$file_magic_test_file"; then
+ case "$deplibs_check_method" in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool at gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+])
+
+
+# AC_PATH_MAGIC - find a file program which can recognise a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
+AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
+ else
+ MAGIC_CMD=:
+ fi
+fi
+])
+
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case "$ac_prog" in
+ # Accept absolute paths.
+changequote(,)dnl
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+changequote([,])dnl
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])
+
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ lt_cv_prog_gnu_ld=yes
+else
+ lt_cv_prog_gnu_ld=no
+fi])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])
+
+# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
+[lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+])
+
+# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognise dependant libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case "$host_os" in
+aix4*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi4*)
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ changequote([, ])dnl
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin* | mingw* |pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
+ ;;
+
+freebsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case "$host_cpu" in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+ changequote([, ])dnl
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20*|hpux11*)
+ # TODO: Does this work for hpux-11 too?
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ changequote([, ])dnl
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+
+irix5* | irix6*)
+ case "$host_os" in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case "$LD" in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ changequote(,)dnl
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ changequote([, ])dnl
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ case "$host_cpu" in
+ alpha* | i*86 | powerpc* | sparc* | ia64* | s390* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ changequote([, ])dnl
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ [lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library']
+ else
+ [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object']
+ fi
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+
+openbsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case "$host_cpu" in
+ i*86 )
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library'
+ changequote([, ])dnl
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+newsos6)
+ [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case "$host_vendor" in
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ motorola)
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ changequote([, ])dnl
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ esac
+ ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+])
+
+
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ else
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+AC_MSG_RESULT([$NM])
+])
+
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case "$host" in
+*-*-beos* | *-*-cygwin* | *-*-pw32*)
+ # These system don't have libm
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
+ ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-convenience to the
+# configure arguments. Note that LIBLTDL and INCLTDL are not
+# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
+# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
+# with '${top_builddir}/' and INCLTDL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!). If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ case "$enable_ltdl_convenience" in
+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+ "") enable_ltdl_convenience=yes
+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+ esac
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+ INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-install to the configure
+# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
+# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
+# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
+# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
+# with '${top_srcdir}/' (note the single quotes!). If your package is
+# not flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
+ ])
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+ INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
+ fi
+])
+
+# If this macro is not defined by Autoconf, define it here.
+ifdef([AC_PROVIDE_IFELSE],
+ [],
+ [define([AC_PROVIDE_IFELSE],
+ [ifdef([AC_PROVIDE_$1],
+ [$2], [$3])])])
+
+# AC_LIBTOOL_CXX - enable support for C++ libraries
+AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
+
+AC_DEFUN([_AC_LIBTOOL_CXX],
+[AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([AC_PROG_CXXCPP])
+LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
+lt_save_CC="$CC"
+lt_save_CFLAGS="$CFLAGS"
+dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
+dnl is set to the C++ compiler.
+AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" \
+file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
+--build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
+|| AC_MSG_ERROR([libtool tag configuration failed])
+CC="$lt_save_CC"
+CFLAGS="$lt_save_CFLAGS"
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+# AC_LIBTOOL_GCJ - enable support for GCJ libraries
+AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
+
+AC_DEFUN([_AC_LIBTOOL_GCJ],
+[AC_REQUIRE([AC_PROG_LIBTOOL])
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
+ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
+ [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
+ [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
+ [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
+LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
+lt_save_CC="$CC"
+lt_save_CFLAGS="$CFLAGS"
+dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
+dnl is set to the C++ compiler.
+AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" \
+file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
+--build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
+|| AC_MSG_ERROR([libtool tag configuration failed])
+CC="$lt_save_CC"
+CFLAGS="$lt_save_CFLAGS"
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+dnl old names
+AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
+AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
+AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
+
+AC_DEFUN([LT_AC_PROG_GCJ],
+[AC_CHECK_TOOL(GCJ, gcj, no)
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)
+])
+
+# Do all the work for Automake. This macro actually does too much --
+# some checks are only needed if your package does certain things.
+# But this isn't really a big deal.
+
+# serial 1
+
+dnl Usage:
+dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+
+AC_DEFUN(AM_INIT_AUTOMAKE,
+[AC_REQUIRE([AC_PROG_INSTALL])
+PACKAGE=[$1]
+AC_SUBST(PACKAGE)
+VERSION=[$2]
+AC_SUBST(VERSION)
+dnl test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+ifelse([$3],,
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
+dnl FIXME This is truly gross.
+missing_dir=`cd $ac_aux_dir && pwd`
+AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+AC_REQUIRE([AC_PROG_MAKE_SET])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+AC_DEFUN(AM_SANITY_CHECK,
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+ if test "[$]*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftestfile`
+ fi
+ if test "[$]*" != "X $srcdir/configure conftestfile" \
+ && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "[$]2" = conftestfile
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+rm -f conftest*
+AC_MSG_RESULT(yes)])
+
+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+dnl The program must properly implement --version.
+AC_DEFUN(AM_MISSING_PROG,
+[AC_MSG_CHECKING(for working $2)
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if ($2 --version) < /dev/null > /dev/null 2>&1; then
+ $1=$2
+ AC_MSG_RESULT(found)
+else
+ $1="$3/missing $2"
+ AC_MSG_RESULT(missing)
+fi
+AC_SUBST($1)])
+
+# Like AC_CONFIG_HEADER, but automatically create stamp file.
+
+AC_DEFUN(AM_CONFIG_HEADER,
+[AC_PREREQ([2.12])
+AC_CONFIG_HEADER([$1])
+dnl When config.status generates a header, we must update the stamp-h file.
+dnl This file resides in the same directory as the config header
+dnl that is generated. We must strip everything past the first ":",
+dnl and everything past the last "/".
+AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
+ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
+<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
+<<am_indx=1
+for am_file in <<$1>>; do
+ case " <<$>>CONFIG_HEADERS " in
+ *" <<$>>am_file "*<<)>>
+ echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
+ ;;
+ esac
+ am_indx=`expr "<<$>>am_indx" + 1`
+done<<>>dnl>>)
+changequote([,]))])
+
Added: kde-extras/kfocus/branches/upstream/current/admin/Makefile.common
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/Makefile.common 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/Makefile.common 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,286 @@
+
+cvs:
+ @if grep '$$(top_srcdir)/acinclude.m4:' Makefile.am >/dev/null; then \
+ echo "*** Concatenating configure tests into acinclude.m4" ;\
+ rm -f acinclude.m4 configure.files ;\
+ $(MAKE) -f Makefile.am top_srcdir=. acinclude.m4 ;\
+ fi
+ @if test -r configure.in.in; then \
+ rm -f subdirs configure.in ;\
+ echo "*** Creating list of subdirectories in subdirs" ;\
+ $(MAKE) -f Makefile.am top_srcdir=. subdirs ;\
+ echo "*** Searching for subdirectories..." ;\
+ $(MAKE) -f Makefile.am top_srcdir=. configure.in ;\
+ fi
+ @echo "*** Retrieving configure tests needed by configure.in"
+ @aclocal
+ @echo "*** Scanning for include statements"
+ @autoheader
+ @echo "*** Building Makefile templates"
+ @automake
+ @echo "*** Scanning for moc files and kde tags"
+ @perl admin/am_edit
+ @echo "*** Building configure"
+ @autoconf
+ @if test -r configure.in.in ; then \
+ perl -pi -e 'print "if test \"x\$$with_fast_perl\" = \"xyes\" ;\
+ then\n perl -i.bak \$$ac_aux_dir/conf.change.pl \$$CONFIG_STATUS\
+ || mv \$$CONFIG_STATUS.bak \$$CONFIG_STATUS;\
+ \n rm -f \$$CONFIG_STATUS.bak;\nfi\
+ \n" if /^\s*chmod\s+.*\+x\s+.*CONFIG_STATUS/;' configure ;\
+ fi
+ @echo "*** Creating date/time stamp"
+ @touch stamp-h.in
+ @if egrep "^cvs-local:" Makefile.am >/dev/null; then \
+ $(MAKE) -f Makefile.am cvs-local ;\
+ fi
+ @if grep '} \$$ac_kw foo' configure >/dev/null 2>&1; then perl -p -i -e "s/ac_kw foo/ac_kw int foo/" configure; fi
+#David's hack for autoconf bug when $INSTALL is set
+ @perl -pi -e 'if (/\[\/\$$\]\*. INSTALL=/) { print $$_ ; $$_ = "\"\") ;;\n"; }' configure
+ @echo "*** Finished"
+ @echo " Don't forget to run ./configure"
+ @echo " If you haven't done so in a while, run ./configure --help"
+
+dist:
+ @if grep -e '$$(top_srcdir)/acinclude.m4:' Makefile.am >/dev/null; then \
+ $(MAKE) -f Makefile.am top_srcdir=. acinclude.m4 ;\
+ fi
+ @if test -r configure.in.in; then \
+ $(MAKE) -f Makefile.am top_srcdir=. subdirs configure.in; \
+ fi ;\
+ aclocal; \
+ autoheader; \
+ automake --foreign --include-deps; \
+ perl admin/am_edit; \
+ autoconf; \
+ if test -r configure.in.in ; then \
+ perl -pi -e 'print "if test \"x\$$with_fast_perl\" = \"xyes\" ;\
+ then\n perl -i.bak \$$ac_aux_dir/conf.change.pl \$$CONFIG_STATUS\
+ || mv \$$CONFIG_STATUS.bak \$$CONFIG_STATUS;\
+ \n rm -f \$$CONFIG_STATUS.bak;\nfi\
+ \n" if /^\s*chmod\s+.*\+x\s+.*CONFIG_STATUS/;' configure ;\
+ fi ;\
+ touch stamp-h.in; \
+ if grep -e "^cvs-local:" Makefile.am >/dev/null; then \
+ $(MAKE) -f Makefile.am cvs-local ;\
+ fi ;\
+ if grep "ac_kw foo" configure >/dev/null 2>&1; then perl -p -i -e "s/ac_kw foo/ac_kw int foo/" configure; fi ;\
+ if test -d po; then \
+ LIST=`find ./po -name "*.po"`; \
+ for i in $$LIST; do \
+ file2=`echo $$i | sed -e "s#\.po#\.gmo#"`; \
+ msgfmt -o $$file2 $$i || touch $$file2; \
+ done ;\
+ fi
+ @if grep -e "^cvs-dist-local:" Makefile.am >/dev/null; then \
+ $(MAKE) -f Makefile.am cvs-dist-local ;\
+ fi
+
+cvs-clean:
+ @if test ! -d CVS; then \
+ echo "You don't have a toplevel CVS directory."; \
+ echo "You most certainly didn't use cvs to get these sources."; \
+ echo "But this function depends on cvs's information."; \
+ exit 1 ;\
+ fi;\
+ pwd=`pwd` ;\
+ dirs=`find . -type d | grep -v CVS | sed -e "s#^./##"` ;\
+ for i in $$dirs; do \
+ if test ! -d "$$pwd/$$i/CVS"; then \
+ echo "D $$i" ;\
+ rm -rf "$$pwd/$$i"; \
+ continue; \
+ fi ;\
+ cd $$pwd/$$i ;\
+ for f in * .*; do \
+ if test ! -d "$$f"; then \
+ if grep "^/$$f/" CVS/Entries > /dev/null; then \
+ a="b"; \
+ else \
+ echo "F $$i/$$f"; \
+ rm -f "$$pwd/$$i/$$f"; \
+ fi; \
+ fi ; \
+ done; \
+ done
+
+
+# The Makefiles have to be sorted for slashes, since configure creates
+# only one directory per Makefile not the whole hierarchy
+configure.in: configure.files $(shell test -f configure.files && cat configure.files) subdirs
+ @rm -f configure.in rm -f configure.in.new ;\
+ cat `cat configure.files | egrep -v "^configure.in.bot"` >> configure.in.new ;\
+ echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new ;\
+ echo "AC_OUTPUT( \\" >> configure.in.new ;\
+ mfs=`find . -type d -print | fgrep -v "/." | sed -e "s#\./##" -e "/^debian/d" | sort`; \
+ for i in $$mfs; do \
+ topleveldir=`echo $$i| sed -e "s#/.*##"`; \
+ if test -f $$topleveldir/configure.in; then \
+ continue; \
+ fi ;\
+ if test ! -f $$i/Makefile.am; then \
+ continue; \
+ fi ;\
+ if test -s inst-apps; then \
+ if test -z "`grep \"^$$topleveldir\" inst-apps`"; then \
+ continue; \
+ fi ;\
+ fi ;\
+ echo "$$i/Makefile \\" >> configure.in.new ;\
+ done ;\
+ egrep '^dnl AC_OUTPUT\(.*\)' `cat configure.files` | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#" >> configure.in.new ;\
+ echo ")" >> configure.in.new
+ @modulename= ;\
+ if test -f configure.in.in; then \
+ if head -2 configure.in.in | egrep "^#MIN_CONFIG$$" > /dev/null; then \
+ line=`egrep "^AM_INIT_AUTOMAKE\(" configure.in.in` ;\
+ if test -n "$$line"; then \
+ modulename=`echo $$line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"` ;\
+ VERSION=`echo $$line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"` ;\
+ fi ;\
+ sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" configure.in.new > configure.in \
+ && mv configure.in configure.in.new ;\
+ fi ;\
+ fi ;\
+ if test -z "$$modulename" || test "$$modulename" = "@MODULENAME@"; then \
+ modulename=`pwd`; modulename=`basename $$modulename`; \
+ fi ;\
+ if test -z "$$VERSION" || test "$$VERSION" = "@VERSION@"; then \
+ VERSION="\"2.1 beta 2\""; \
+ fi ;\
+ sed -e "s#@MODULENAME@#$$modulename#" configure.in.new | \
+ sed -e "s#@VERSION@#$$VERSION#" > configure.in
+ @if test -f configure.in.bot ; then cat configure.in.bot >> configure.in ; fi
+ @rm -f configure.in.new
+
+configure.files: subdirs
+ @admindir=NO ;\
+ for i in . .. ../.. ../../..; do \
+ if test -x $$i/admin; then admindir=$$i/admin; break; fi; \
+ done ;\
+ rm -rf configure.files ;\
+ if test -f configure.in.in && head -2 configure.in.in | egrep "^#MIN_CONFIG$$" > /dev/null; then \
+ echo $$admindir/configure.in.min >> configure.files ;\
+ fi
+ @test -f configure.in.in && echo configure.in.in >> configure.files
+ @list=`find . -name "configure.in.in" | sort`; \
+ for i in $$list; do if test -f $$i && test ! `dirname $$i` = "." ; then \
+ echo $$i >> configure.files ;\
+ fi; done
+ @if test -f configure.in.mid ; then echo configure.in.mid >> configure.files ; fi
+ @if test -f configure.in.bot ; then echo configure.in.bot >> configure.files ; fi
+
+subdirs:
+ @files=`ls -1 | sort`; \
+ dirs= ;\
+ lib_dirs= ;\
+ first_dirs= ;\
+ last_dirs= ;\
+ compilefirst=`grep '^COMPILE_FIRST[ ]*=' Makefile.am | \
+ sed -e 's#^COMPILE_FIRST[ ]*=[ ]*#|#' | sed -e 's#$$#|#' | sed -e 's# #|#g'`;\
+ compilelast=`grep '^COMPILE_LAST[ ]*=' Makefile.am | \
+ sed -e 's#^COMPILE_LAST[ ]*=[ ]*#|#' | sed -e 's#$$#|#' | sed -e 's# #|#g'`;\
+ for i in $$files; do if test -d $$i; then \
+ if test -f $$i/Makefile.am; then \
+ if echo $$compilefirst | grep "|$$i|" >/dev/null; then \
+ first_dirs="$$first_dirs $$i" ;\
+ elif echo $$compilelast | grep "|$$i|" >/dev/null; then \
+ last_dirs="$$last_dirs $$i" ; \
+ else dirs="$$dirs $$i" ;\
+ fi ;\
+ fi ;\
+ fi; \
+ done ;\
+ rm -f SUBDIRS ;\
+ for i in $$dirs; do \
+ echo $$i >> ./SUBDIRS; \
+ done
+ @if test -r subdirs && diff subdirs SUBDIRS > /dev/null; then \
+ rm -f SUBDIRS; \
+ fi
+ @test -r SUBDIRS && mv SUBDIRS subdirs || true
+
+package-merge:
+ @catalogs='$(POFILES)'; \
+ for cat in $$catalogs; do \
+ echo $$cat $$name; \
+ msgmerge -o $$cat.new $$cat $(PACKAGE).pot ; \
+ if test -s $$cat.new; then \
+ grep -v "\"POT-Creation" $$cat.new > $$cat.new.2 ; \
+ grep -v "\"POT-Creation" $$cat >> $$cat.new.1; \
+ if diff $$cat.new.1 $$cat.new.2; then \
+ rm $$cat.new; \
+ else \
+ mv $$cat.new $$cat ; \
+ fi; \
+ rm -f $$cat.new.1 $$cat.new.2 ;\
+ fi ;\
+ done
+
+
+package-messages:
+ @rm -rf po.backup ;\
+ mkdir po.backup ;\
+ for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do \
+ egrep -v '^#([^:]|$)' po/$$i | egrep '^.*[^ ]+.*$$' | grep -v "\"POT-Creation" > po.backup/$$i ; \
+ cp po/$$i po.backup/backup_$$i ; \
+ touch -r po/$$i po.backup/backup_$$i ;\
+ rm po/$$i ;\
+ done
+ @podir=$${podir:-$$PWD/po} ;\
+ files=`find . -name Makefile.am | xargs egrep -l '^messages:' `; \
+ dirs=`for i in $$files; do echo \`dirname $$i\`; done`; \
+ tmpname="$$PWD/messages.log" ;\
+ for subdir in $$dirs; do \
+ test -z "$$VERBOSE" || echo "Making messages in $$subdir"; \
+ (cd $$subdir ;\
+ if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then \
+ $${EXTRACTRC:-extractrc} *.rc *.ui > rc.cpp ;\
+ else \
+ candidates=`ls -1 *.rc *.ui 2>/dev/null` ;\
+ if test -n "$$candidates"; then \
+ echo "$$subdir has *.rc or *.ui files, but not correct messages line" ;\
+ fi ;\
+ fi ;\
+ if test -n "`grep -r KAboutData *.c* *.C* 2>/dev/null`"; then \
+ echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp ;\
+ else echo " " > _translatorinfo.cpp ;\
+ fi; \
+ perl -e '$$mes=0; while (<STDIN>) { if (/^messages:/) { $$mes=1; print $$_; next; } if ($$mes) { if (/$$\\(XGETTEXT\)/ && / -o/) { s/ -o \$$\(podir\)/ _translatorinfo.cpp -o \$$\(podir\)/ } print $$_; } else { print $$_; } }' < Makefile.am > _transMakefile ;\
+ $(MAKE) -s -f _transMakefile podir=$$podir \
+ XGETTEXT="$${XGETTEXT:-xgettext} -C -ki18n \
+ -kI18N_NOOP -ktranslate -kaliasLocale \
+ -x $${includedir:-$$KDEDIR/include}/kde.pot" \
+ messages ) >$$tmpname 2>&1 ;\
+ test -s $$tmpname && (echo $$subdir ; cat $$tmpname) ;\
+ test ! -f $$subdir/rc.cpp || rm -f $$subdir/rc.cpp ;\
+ rm -f $$subdir/_translatorinfo.cpp ;\
+ rm -f $$subdir/_transMakefile ;\
+ done
+ rm -f $$tmpname
+ @for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do \
+ if test ! -f po/$$i; then echo "disappeared: $$i"; fi ;\
+ done
+ @for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do \
+ egrep -v '^#([^:]|$)' po/$$i | egrep '^.*[^ ]+.*$$' | grep -v "\"POT-Creation" > temp.pot ;\
+ if test -f po.backup/$$i && test -n "`diff temp.pot po.backup/$$i`"; then \
+ echo "will update $$i"; \
+ msgmerge -q po.backup/backup_$$i po/$$i > temp.pot ;\
+ mv temp.pot po/$$i; \
+ else \
+ if test -f po.backup/backup_$$i; then \
+ test -z "$$VERBOSE" || echo "I'm restoring $$i" ;\
+ mv po.backup/backup_$$i po/$$i; \
+ rm po.backup/$$i; \
+ else \
+ echo "will add $$i" ;\
+ fi ;\
+ fi ;\
+ done
+ @rm -f temp.pot
+ @rm -rf po.backup
+
+test:
+ perl -e '$$mes=0; while (<STDIN>) { if (/^messages:/) { $$mes=1; print $$_; next; } if ($$mes) { if (! /^\t/) { exit(0); } if (/$$\\(XGETTEXT\)/ && / -o/) { s/ -o/ _translatorinfo.cpp -o/ } print $$_; } }' < Makefile.am
+
+.SILENT:
Added: kde-extras/kfocus/branches/upstream/current/admin/acinclude.m4.in
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/acinclude.m4.in 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/acinclude.m4.in 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,4027 @@
+## -*- autoconf -*-
+
+dnl This file is part of the KDE libraries/packages
+dnl Copyright (C) 1997 Janos Farkas (chexum at shadow.banki.hu)
+dnl (C) 1997,98,99 Stephan Kulow (coolo at kde.org)
+
+dnl This file is free software; you can redistribute it and/or
+dnl modify it under the terms of the GNU Library General Public
+dnl License as published by the Free Software Foundation; either
+dnl version 2 of the License, or (at your option) any later version.
+
+dnl This library is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+dnl Library General Public License for more details.
+
+dnl You should have received a copy of the GNU Library General Public License
+dnl along with this library; see the file COPYING.LIB. If not, write to
+dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+dnl Boston, MA 02111-1307, USA.
+
+dnl IMPORTANT NOTE:
+dnl Please do not modify this file unless you expect your modifications to be
+dnl carried into every other module in the repository. If you decide that you
+dnl really want to modify it, contact coolo at kde.org mentioning that you have
+dnl and that the modified file should be committed to every module.
+dnl
+dnl Single-module modifications are best placed in configure.in for kdelibs
+dnl and kdebase or configure.in.in if present.
+
+
+dnl ------------------------------------------------------------------------
+dnl Find a file (or one of more files in a list of dirs)
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_FIND_FILE,
+[
+$3=NO
+for i in $2;
+do
+ for j in $1;
+ do
+ if test -r "$i/$j"; then
+ $3=$i
+ break 2
+ fi
+ done
+done
+])
+
+dnl KDE_FIND_PATH(programm-name, variable-name, list of directories,
+dnl if-not-found, test-parameter)
+AC_DEFUN(KDE_FIND_PATH,
+[
+ AC_MSG_CHECKING([for $1])
+ if test -n "$$2"; then
+ kde_cv_path="$$2";
+ else
+ kde_cache=`echo $1 | sed 'y%./+-%__p_%'`
+
+ AC_CACHE_VAL(kde_cv_path_$kde_cache,
+ [
+ kde_cv_path="NONE"
+ dirs="$3"
+ kde_save_IFS=$IFS
+ IFS=':'
+ for dir in $PATH; do
+ dirs="$dirs $dir"
+ done
+ IFS=$kde_save_IFS
+
+ for dir in $dirs; do
+ if test -x "$dir/$1"; then
+ if test -n "$5"
+ then
+ evalstr="$dir/$1 $5 2>&1 "
+ if eval $evalstr; then
+ kde_cv_path="$dir/$1"
+ break
+ fi
+ else
+ kde_cv_path="$dir/$1"
+ break
+ fi
+ fi
+ done
+
+ eval "kde_cv_path_$kde_cache=$kde_cv_path"
+
+ ])
+
+ eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
+
+ fi
+
+ if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
+ AC_MSG_RESULT(not found)
+ $4
+ else
+ AC_MSG_RESULT($kde_cv_path)
+ $2=$kde_cv_path
+
+ fi
+])
+
+AC_DEFUN(KDE_MOC_ERROR_MESSAGE,
+[
+ AC_MSG_ERROR([No Qt meta object compiler (moc) found!
+Please check whether you installed Qt correctly.
+You need to have a running moc binary.
+configure tried to run $ac_cv_path_moc and the test didn't
+succeed. If configure shouldn't have tried this one, set
+the environment variable MOC to the right one before running
+configure.
+])
+])
+
+AC_DEFUN(KDE_UIC_ERROR_MESSAGE,
+[
+ AC_MSG_WARN([No Qt ui compiler (uic) found!
+Please check whether you installed Qt correctly.
+You need to have a running uic binary.
+configure tried to run $ac_cv_path_uic and the test didn't
+succeed. If configure shouldn't have tried this one, set
+the environment variable UIC to the right one before running
+configure.
+])
+])
+
+dnl ------------------------------------------------------------------------
+dnl Find the meta object compiler and the ui compiler in the PATH,
+dnl in $QTDIR/bin, and some more usual places
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_PATH_QT_MOC_UIC,
+[
+ qt_bindirs=""
+ for dir in $kde_qt_dirs; do
+ qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc"
+ done
+ qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin"
+ if test ! "$ac_qt_bindir" = "NO"; then
+ qt_bindirs="$ac_qt_bindir $qt_bindirs"
+ fi
+
+ KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE])
+ KDE_FIND_PATH(uic, UIC, [$qt_bindirs], [UIC="" ; KDE_UIC_ERROR_MESSAGE])
+ if test -z "$UIC" ; then
+ if test -z "$UIC_NOT_NEEDED" ; then
+ exit 1
+ else
+ UIC="echo uic not available: "
+ fi
+ fi
+ AC_SUBST(MOC)
+ AC_SUBST(UIC)
+])
+
+AC_DEFUN(KDE_1_CHECK_PATHS,
+[
+ KDE_1_CHECK_PATH_HEADERS
+
+ KDE_TEST_RPATH=
+
+ if test -n "$USE_RPATH"; then
+
+ if test -n "$kde_libraries"; then
+ KDE_TEST_RPATH="-R $kde_libraries"
+ fi
+
+ if test -n "$qt_libraries"; then
+ KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries"
+ fi
+
+ if test -n "$x_libraries"; then
+ KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries"
+ fi
+
+ KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH"
+ fi
+
+AC_MSG_CHECKING([for KDE libraries installed])
+ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5'
+
+if AC_TRY_EVAL(ac_link) && test -s conftest; then
+ AC_MSG_RESULT(yes)
+else
+ AC_MSG_ERROR([your system fails at linking a small KDE application!
+Check, if your compiler is installed correctly and if you have used the
+same compiler to compile Qt and kdelibs as you did use now.
+For more details about this problem, look at the end of config.log.])
+fi
+
+if eval `KDEDIR= ./conftest 2>&5`; then
+ kde_result=done
+else
+ kde_result=problems
+fi
+
+KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
+kde_have_all_paths=yes
+
+KDE_SET_PATHS($kde_result)
+
+])
+
+AC_DEFUN(KDE_SET_PATHS,
+[
+ kde_cv_all_paths="kde_have_all_paths=\"yes\" \
+ kde_htmldir=\"$kde_htmldir\" \
+ kde_appsdir=\"$kde_appsdir\" \
+ kde_icondir=\"$kde_icondir\" \
+ kde_sounddir=\"$kde_sounddir\" \
+ kde_datadir=\"$kde_datadir\" \
+ kde_locale=\"$kde_locale\" \
+ kde_cgidir=\"$kde_cgidir\" \
+ kde_confdir=\"$kde_confdir\" \
+ kde_mimedir=\"$kde_mimedir\" \
+ kde_toolbardir=\"$kde_toolbardir\" \
+ kde_wallpaperdir=\"$kde_wallpaperdir\" \
+ kde_templatesdir=\"$kde_templatesdir\" \
+ kde_bindir=\"$kde_bindir\" \
+ kde_servicesdir=\"$kde_servicesdir\" \
+ kde_servicetypesdir=\"$kde_servicetypesdir\" \
+ kde_moduledir=\"$kde_moduledir\" \
+ kde_result=$1"
+])
+
+AC_DEFUN(KDE_SET_DEFAULT_PATHS,
+[
+if test "$1" = "default"; then
+
+ if test -z "$kde_htmldir"; then
+ kde_htmldir='\${prefix}/share/doc/HTML'
+ fi
+ if test -z "$kde_appsdir"; then
+ kde_appsdir='\${prefix}/share/applnk'
+ fi
+ if test -z "$kde_icondir"; then
+ kde_icondir='\${prefix}/share/icons'
+ fi
+ if test -z "$kde_sounddir"; then
+ kde_sounddir='\${prefix}/share/sounds'
+ fi
+ if test -z "$kde_datadir"; then
+ kde_datadir='\${prefix}/share/apps'
+ fi
+ if test -z "$kde_locale"; then
+ kde_locale='\${prefix}/share/locale'
+ fi
+ if test -z "$kde_cgidir"; then
+ kde_cgidir='\${exec_prefix}/cgi-bin'
+ fi
+ if test -z "$kde_confdir"; then
+ kde_confdir='\${prefix}/share/config'
+ fi
+ if test -z "$kde_mimedir"; then
+ kde_mimedir='\${prefix}/share/mimelnk'
+ fi
+ if test -z "$kde_toolbardir"; then
+ kde_toolbardir='\${prefix}/share/toolbar'
+ fi
+ if test -z "$kde_wallpaperdir"; then
+ kde_wallpaperdir='\${prefix}/share/wallpapers'
+ fi
+ if test -z "$kde_templatesdir"; then
+ kde_templatesdir='\${prefix}/share/templates'
+ fi
+ if test -z "$kde_bindir"; then
+ kde_bindir='\${exec_prefix}/bin'
+ fi
+ if test -z "$kde_servicesdir"; then
+ kde_servicesdir='\${prefix}/share/services'
+ fi
+ if test -z "$kde_servicetypesdir"; then
+ kde_servicetypesdir='\${prefix}/share/servicetypes'
+ fi
+ if test -z "$kde_moduledir"; then
+ kde_moduledir='\${prefix}/lib/kde2'
+ fi
+
+ KDE_SET_PATHS(defaults)
+
+else
+
+ if test $kde_qtver = 1; then
+ AC_MSG_RESULT([compiling])
+ KDE_1_CHECK_PATHS
+ else
+ AC_MSG_ERROR([path checking not yet supported for KDE 2])
+ fi
+
+fi
+])
+
+AC_DEFUN(KDE_CHECK_PATHS_FOR_COMPLETENESS,
+[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" ||
+ test -z "$kde_icondir" || test -z "$kde_sounddir" ||
+ test -z "$kde_datadir" || test -z "$kde_locale" ||
+ test -z "$kde_cgidir" || test -z "$kde_confdir" ||
+ test -z "$kde_mimedir" || test -z "$kde_toolbardir" ||
+ test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" ||
+ test -z "$kde_bindir" || test -z "$kde_servicesdir" ||
+ test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" ||
+ test "$kde_have_all_paths" != "yes"; then
+ kde_have_all_paths=no
+ fi
+])
+
+AC_DEFUN(KDE_MISSING_PROG_ERROR,
+[
+ AC_MSG_ERROR([The important program $1 was not found!
+Please check whether you installed KDE correctly.
+])
+])
+
+AC_DEFUN(KDE_SUBST_PROGRAMS,
+[AC_REQUIRE([AC_CREATE_KFSSTND])dnl
+
+ kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde2/bin /usr/kde/bin /usr/local/kde/bin"
+ if test -n "$KDEDIRS"; then
+ kde_save_IFS=$IFS
+ IFS=:
+ for dir in $KDEDIRS; do
+ kde_default_bindirs="$dir/bin $kde_default_bindirs "
+ done
+ IFS=$kde_save_IFS
+ fi
+ kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs"
+ KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)])
+ KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)])
+ KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(mcopidl)])
+ KDE_FIND_PATH(kdb2html, KDB2HTML, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kdb2html)])
+ KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(artsc-config)])
+ KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)])
+
+ DCOP_DEPENDENCIES='$(DCOPIDL)'
+ AC_SUBST(DCOPIDL)
+ AC_SUBST(DCOPIDL2CPP)
+ AC_SUBST(DCOP_DEPENDENCIES)
+ AC_SUBST(MCOPIDL)
+ AC_SUBST(KDB2HTML)
+ AC_SUBST(ARTSCCONFIG)
+ AC_SUBST(KDECONFIG)
+
+ if test -x "$KDECONFIG"; then # it can be "compiled"
+ kde_libs_prefix=`$KDECONFIG --prefix`
+ if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then
+ AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs.
+ This means it has been moved since you installed it.
+ This won't work. Please recompile kdelibs for the new prefix.
+ ])
+ fi
+ kde_libs_htmldir=`$KDECONFIG --install html --expandvars`
+ else
+ kde_libs_prefix='$(prefix)'
+ kde_libs_htmldir='$(kde_htmldir)'
+ fi
+ AC_SUBST(kde_libs_prefix)
+ AC_SUBST(kde_libs_htmldir)
+])dnl
+
+AC_DEFUN(AC_CREATE_KFSSTND,
+[
+AC_REQUIRE([AC_CHECK_RPATH])
+
+AC_MSG_CHECKING([for KDE paths])
+kde_result=""
+kde_cached_paths=yes
+AC_CACHE_VAL(kde_cv_all_paths,
+[
+ KDE_SET_DEFAULT_PATHS($1)
+ kde_cached_paths=no
+])
+eval "$kde_cv_all_paths"
+KDE_CHECK_PATHS_FOR_COMPLETENESS
+if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then
+ # wrong values were cached, may be, we can set better ones
+ kde_result=
+ kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir=
+ kde_datadir= kde_locale= kde_cgidir= kde_confdir=
+ kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir=
+ kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir=
+ kde_have_all_paths=
+ KDE_SET_DEFAULT_PATHS($1)
+ eval "$kde_cv_all_paths"
+ KDE_CHECK_PATHS_FOR_COMPLETENESS
+ kde_result="$kde_result (cache overridden)"
+fi
+if test "$kde_have_all_paths" = "no"; then
+ AC_MSG_ERROR([configure could not run a little KDE program to test the environment.
+Since it had compiled and linked before, it must be a strange problem on your system.
+Look at config.log for details. If you are not able to fix this, look at
+http://www.kde.org/faq/installation.html or any www.kde.org mirror.
+(If you're using an egcs version on Linux, you may update binutils!)
+])
+else
+ rm -f conftest*
+ AC_MSG_RESULT($kde_result)
+fi
+
+bindir=$kde_bindir
+
+KDE_SUBST_PROGRAMS
+
+])
+
+AC_DEFUN(AC_SUBST_KFSSTND,
+[
+AC_SUBST(kde_htmldir)
+AC_SUBST(kde_appsdir)
+AC_SUBST(kde_icondir)
+AC_SUBST(kde_sounddir)
+AC_SUBST(kde_datadir)
+AC_SUBST(kde_locale)
+AC_SUBST(kde_confdir)
+AC_SUBST(kde_mimedir)
+AC_SUBST(kde_wallpaperdir)
+AC_SUBST(kde_bindir)
+dnl for KDE 2
+AC_SUBST(kde_templatesdir)
+AC_SUBST(kde_servicesdir)
+AC_SUBST(kde_servicetypesdir)
+AC_SUBST(kde_moduledir)
+if test "$kde_qtver" = 1; then
+ kde_minidir="$kde_icondir/mini"
+else
+# for KDE 1 - this breaks KDE2 apps using minidir, but
+# that's the plan ;-/
+ kde_minidir="/dev/null"
+fi
+dnl AC_SUBST(kde_minidir)
+dnl AC_SUBST(kde_cgidir)
+dnl AC_SUBST(kde_toolbardir)
+])
+
+AC_DEFUN(KDE_MISC_TESTS,
+[
+ AC_LANG_C
+ dnl Checks for libraries.
+ AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for FreeBSD
+ AC_SUBST(LIBCOMPAT)
+ kde_have_crypt=
+ AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes],
+ AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [
+ AC_MSG_WARN([you have no crypt in either libcrypt or libc.
+You should install libcrypt from another source or configure with PAM
+support])
+ kde_have_crypt=no
+ ]))
+ AC_SUBST(LIBCRYPT)
+ if test $kde_have_crypt = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function])
+ fi
+ AC_CHECK_KSIZE_T
+ AC_LANG_C
+ AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"])
+ if test $ac_cv_lib_dnet_dnet_ntoa = no; then
+ AC_CHECK_LIB(dnet_stub, dnet_ntoa,
+ [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"])
+ fi
+ AC_CHECK_FUNC(inet_ntoa)
+ if test $ac_cv_func_inet_ntoa = no; then
+ AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl")
+ fi
+ AC_CHECK_FUNC(connect)
+ if test $ac_cv_func_connect = no; then
+ AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", ,
+ $X_EXTRA_LIBS)
+ fi
+
+ AC_CHECK_FUNC(remove)
+ if test $ac_cv_func_remove = no; then
+ AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix")
+ fi
+
+ # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
+ AC_CHECK_FUNC(shmat, ,
+ AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"))
+
+ # Solaris 2.6 needs -lresolv for res_init
+ AC_CHECK_FUNC(res_init, ,
+ AC_CHECK_LIB(resolv, res_init, X_EXTRA_LIBS="$X_EXTRA_LIBS -lresolv"))
+
+ LIBSOCKET="$X_EXTRA_LIBS"
+ AC_SUBST(LIBSOCKET)
+ AC_SUBST(X_EXTRA_LIBS)
+ AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4
+ AC_SUBST(LIBUCB)
+
+ case $host in dnl this *is* LynxOS specific
+ *-*-lynxos* )
+ AC_MSG_CHECKING([LynxOS header file wrappers])
+ [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"]
+ AC_MSG_RESULT(disabled)
+ AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS
+ ;;
+ esac
+
+ KDE_CHECK_TYPES
+ KDE_CHECK_LIBDL
+])
+
+dnl ------------------------------------------------------------------------
+dnl Find the header files and libraries for X-Windows. Extended the
+dnl macro AC_PATH_X
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(K_PATH_X,
+[
+AC_REQUIRE([AC_PROG_CPP])dnl
+AC_REQUIRE([KDE_MISC_TESTS])dnl
+AC_MSG_CHECKING(for X)
+AC_LANG_SAVE
+AC_LANG_C
+AC_CACHE_VAL(kde_cv_have_x,
+[# One or both of the vars are not set, and there is no cached value.
+if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then
+ kde_x_includes=NO
+else
+ kde_x_includes=$x_includes
+fi
+if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then
+ kde_x_libraries=NO
+else
+ kde_x_libraries=$x_libraries
+fi
+
+# below we use the standard autoconf calls
+ac_x_libraries=$kde_x_libraries
+ac_x_includes=$kde_x_includes
+
+AC_PATH_X_DIRECT
+dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries.
+dnl Unfortunately, if compiling with the N32 ABI, this is not the correct
+dnl location. The correct location is /usr/lib32 or an undefined value
+dnl (the linker is smart enough to pick the correct default library).
+dnl Things work just fine if you use just AC_PATH_X_DIRECT.
+case "$host" in
+mips-sgi-irix6*)
+ ;;
+*)
+ AC_PATH_X_XMKMF
+ if test -z "$ac_x_includes"; then
+ ac_x_includes="."
+ fi
+ if test -z "$ac_x_libraries"; then
+ ac_x_libraries="/usr/lib"
+ fi
+esac
+#from now on we use our own again
+
+# when the user already gave --x-includes, we ignore
+# what the standard autoconf macros told us.
+if test "$kde_x_includes" = NO; then
+ kde_x_includes=$ac_x_includes
+fi
+
+# for --x-libraries too
+if test "$kde_x_libraries" = NO; then
+ kde_x_libraries=$ac_x_libraries
+fi
+
+if test "$kde_x_includes" = NO; then
+ AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!])
+fi
+
+if test "$kde_x_libraries" = NO; then
+ AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!])
+fi
+
+# Record where we found X for the cache.
+kde_cv_have_x="have_x=yes \
+ kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries"
+])dnl
+eval "$kde_cv_have_x"
+
+if test "$have_x" != yes; then
+ AC_MSG_RESULT($have_x)
+ no_x=yes
+else
+ AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes])
+fi
+
+if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then
+ X_INCLUDES=""
+ x_includes="."; dnl better than nothing :-
+ else
+ x_includes=$kde_x_includes
+ X_INCLUDES="-I$x_includes"
+fi
+
+if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then
+ X_LDFLAGS=""
+ x_libraries="/usr/lib"; dnl better than nothing :-
+ else
+ x_libraries=$kde_x_libraries
+ X_LDFLAGS="-L$x_libraries"
+fi
+all_includes="$X_INCLUDES"
+all_libraries="$X_LDFLAGS"
+
+AC_SUBST(X_INCLUDES)
+AC_SUBST(X_LDFLAGS)
+AC_SUBST(x_libraries)
+AC_SUBST(x_includes)
+
+# Check for libraries that X11R6 Xt/Xaw programs need.
+ac_save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS $X_LDFLAGS"
+# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
+# check for ICE first), but we must link in the order -lSM -lICE or
+# we get undefined symbols. So assume we have SM if we have ICE.
+# These have to be linked with before -lX11, unlike the other
+# libraries we check for below, so use a different variable.
+# --interran at uluru.Stanford.EDU, kb at cs.umb.edu.
+AC_CHECK_LIB(ICE, IceConnectionNumber,
+ [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS)
+AC_SUBST(LIBSM)
+LDFLAGS="$ac_save_LDFLAGS"
+
+AC_SUBST(X_PRE_LIBS)
+
+LIB_X11='-lX11 $(LIBSOCKET)'
+AC_SUBST(LIB_X11)
+
+AC_MSG_CHECKING(for libXext)
+AC_CACHE_VAL(kde_cv_have_libXext,
+[
+kde_ldflags_safe="$LDFLAGS"
+kde_libs_safe="$LIBS"
+
+LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS"
+LIBS="-lXext -lX11 $LIBSOCKET"
+
+AC_TRY_LINK([
+#include <stdio.h>
+],
+[
+printf("hello Xext\n");
+],
+kde_cv_have_libXext=yes,
+kde_cv_have_libXext=no
+ )
+
+LDFLAGS=$kde_ldflags_safe
+LIBS=$kde_libs_safe
+ ])
+
+AC_MSG_RESULT($kde_cv_have_libXext)
+
+if test "$kde_cv_have_libXext" = "no"; then
+ AC_MSG_ERROR([We need a working libXext to proceed. Since configure
+can't find it itself, we stop here assuming that make wouldn't find
+them either.])
+fi
+
+])
+
+AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_PRINT_QT_PROGRAM,
+[
+AC_REQUIRE([KDE_USE_QT])
+cat > conftest.$ac_ext <<EOF
+#include "confdefs.h"
+#include <qglobal.h>
+#include <qapplication.h>
+#include <qapp.h>
+#include <qobjcoll.h>
+EOF
+if test "$kde_qtver" = "2"; then
+cat >> conftest.$ac_ext <<EOF
+#include <qevent.h>
+#include <qstring.h>
+#include <qstyle.h>
+EOF
+
+if test $kde_qtsubver -gt 0; then
+cat >> conftest.$ac_ext <<EOF
+#include <qiconview.h>
+EOF
+fi
+
+fi
+
+echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
+cat >> conftest.$ac_ext <<EOF
+#error 1
+#endif
+
+int main() {
+EOF
+if test "$kde_qtver" = "2"; then
+cat >> conftest.$ac_ext <<EOF
+ QStringList *t = new QStringList();
+EOF
+if test $kde_qtsubver -gt 0; then
+cat >> conftest.$ac_ext <<EOF
+ QIconView iv(0);
+ iv.setWordWrapIconText(false);
+ QString s;
+ s.setLatin1("Elvis is alive", 14);
+ int magnolia = QEvent::Speech; /* new in 2.2 beta2 */
+EOF
+fi
+fi
+cat >> conftest.$ac_ext <<EOF
+ return 0;
+}
+EOF
+])
+
+AC_DEFUN(KDE_USE_QT,
+[
+
+if test -z "$1"; then
+ kde_qtver=2
+ kde_qtsubver=1
+else
+ kde_qtsubver=`echo "$1" | sed -e 's#[0-9]\+\.\([0-9]\+\).*#\1#'`
+ # following is the check if subversion isn´t found in passed argument
+ if test "$kde_qtsubver" = "$1"; then
+ kde_qtsubver=1
+ fi
+ kde_qtver=`echo "$1" | sed -e 's#^\([0-9]\+\)\..*#\1#'`
+ if test "$kde_qtver" = "1"; then
+ kde_qtsubver=42
+ else
+ # this is the version number fallback to 2.1, unless major version is 1 or 2
+ if test "$kde_qtver" != "2"; then
+ kde_qtver=2
+ kde_qtsubver=1
+ fi
+ fi
+fi
+
+if test -z "$2"; then
+ if test $kde_qtver = 2; then
+ if test $kde_qtsubver -gt 0; then
+ kde_qt_minversion=">= Qt 2.2.2"
+ else
+ kde_qt_minversion=">= Qt 2.0.2"
+ fi
+ else
+ kde_qt_minversion=">= 1.42 and < 2.0"
+ fi
+else
+ kde_qt_minversion=$2
+fi
+
+if test -z "$3"; then
+ if test $kde_qtver = 2; then
+ if test $kde_qtsubver -gt 0; then
+ kde_qt_verstring="QT_VERSION >= 222"
+ else
+ kde_qt_verstring="QT_VERSION >= 200"
+ fi
+ else
+ kde_qt_verstring="QT_VERSION >= 142 && QT_VERSION < 200"
+ fi
+else
+ kde_qt_verstring=$3
+fi
+
+if test $kde_qtver = 2; then
+ kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt"
+else
+ kde_qt_dirs="$QTDIR /usr/lib/qt"
+fi
+])
+
+AC_DEFUN(KDE_CHECK_QT_DIRECT,
+[
+AC_REQUIRE([KDE_USE_QT])
+AC_MSG_CHECKING([if Qt compiles without flags])
+AC_CACHE_VAL(kde_cv_qt_direct,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH
+ac_LIBRARY_PATH="$LIBRARY_PATH"
+ac_cxxflags_safe="$CXXFLAGS"
+ac_ldflags_safe="$LDFLAGS"
+ac_libs_safe="$LIBS"
+
+CXXFLAGS="$CXXFLAGS -I$qt_includes"
+LDFLAGS="$LDFLAGS $X_LDFLAGS"
+LIBS="$LIBQT -lXext -lX11 $LIBSOCKET"
+LD_LIBRARY_PATH=
+export LD_LIBRARY_PATH
+LIBRARY_PATH=
+export LIBRARY_PATH
+
+KDE_PRINT_QT_PROGRAM
+
+if AC_TRY_EVAL(ac_link) && test -s conftest; then
+ kde_cv_qt_direct="yes"
+else
+ kde_cv_qt_direct="no"
+ echo "configure: failed program was:" >&AC_FD_CC
+ cat conftest.$ac_ext >&AC_FD_CC
+fi
+
+rm -f conftest*
+CXXFLAGS="$ac_cxxflags_safe"
+LDFLAGS="$ac_ldflags_safe"
+LIBS="$ac_libs_safe"
+
+LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe"
+export LD_LIBRARY_PATH
+LIBRARY_PATH="$ac_LIBRARY_PATH"
+export LIBRARY_PATH
+AC_LANG_RESTORE
+])
+
+if test "$kde_cv_qt_direct" = "yes"; then
+ AC_MSG_RESULT(yes)
+ $1
+else
+ AC_MSG_RESULT(no)
+ $2
+fi
+])
+
+dnl ------------------------------------------------------------------------
+dnl Try to find the Qt headers and libraries.
+dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed)
+dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed)
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_PATH_QT_1_3,
+[
+AC_REQUIRE([K_PATH_X])
+AC_REQUIRE([KDE_USE_QT])
+
+dnl ------------------------------------------------------------------------
+dnl Add configure flag to enable linking to MT version of Qt library.
+dnl ------------------------------------------------------------------------
+
+AC_ARG_ENABLE(
+ mt,
+ [ --enable-mt link to threaded Qt (experimental)],
+ kde_use_qt_mt=$enableval,
+ kde_use_qt_mt=no
+)
+
+USING_QT_MT=""
+
+dnl ------------------------------------------------------------------------
+dnl If we got --enable-qt-mt then adjust some vars for the host.
+dnl ------------------------------------------------------------------------
+
+if test "x$kde_use_qt_mt" = "xyes"; then
+
+ case $host in
+ *-*-linux-*)
+ if test "x$GCC" = "xyes"; then
+ CPPFLAGS="$CPPFLAGS -DQT_THREAD_SUPPORT -pthread"
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -pthread"
+ else
+ AC_MSG_WARN([Compiler is not gcc. MT support disabled.])
+ fi
+ ;;
+ *)
+ AC_MSG_WARN([MT not yet supported on $host - disabled.])
+ ;;
+ esac
+
+fi
+
+kde_qt_was_given=yes
+
+dnl ------------------------------------------------------------------------
+dnl If we haven't been told how to link to Qt, we work it out for ourselves.
+dnl ------------------------------------------------------------------------
+
+if test -z "$LIBQT_GLOB"; then
+
+ LIBQT_GLOB="libqt.*"
+
+fi
+
+if test -z "$LIBQT"; then
+
+ LIBQT="-lqt"
+ kde_int_qt="-lqt"
+
+dnl ------------------------------------------------------------------------
+dnl If we got --enable-qt-mt then adjust the Qt library name for the host.
+dnl ------------------------------------------------------------------------
+
+ if test "x$kde_use_qt_mt" = "xyes"; then
+
+ case $host in
+ *-*-linux-*)
+ if test "x$GCC" = "xyes"; then
+ LIBQT="-lqt-mt"
+ kde_int_qt="-lqt-mt"
+ LIBQT_GLOB="libqt-mt.*"
+ USING_QT_MT="using -mt"
+ fi
+ ;;
+ esac
+ fi
+
+ kde_qt_was_given=no
+
+else
+ kde_int_qt="$LIBQT"
+fi
+
+if test $kde_qtver = 2; then
+
+ AC_REQUIRE([AC_FIND_PNG])
+ AC_REQUIRE([AC_FIND_JPEG])
+ LIBQT="$LIBQT $LIBPNG $LIBJPEG"
+fi
+
+AC_MSG_CHECKING([for Qt])
+
+LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET"
+ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO
+qt_libraries=""
+qt_includes=""
+AC_ARG_WITH(qt-dir,
+ [ --with-qt-dir=DIR where the root of Qt is installed ],
+ [ ac_qt_includes="$withval"/include
+ ac_qt_libraries="$withval"/lib
+ ac_qt_bindir="$withval"/bin
+ ])
+
+AC_ARG_WITH(qt-includes,
+ [ --with-qt-includes=DIR where the Qt includes are. ],
+ [
+ ac_qt_includes="$withval"
+ ])
+
+kde_qt_libs_given=no
+
+AC_ARG_WITH(qt-libraries,
+ [ --with-qt-libraries=DIR where the Qt library is installed.],
+ [ ac_qt_libraries="$withval"
+ kde_qt_libs_given=yes
+ ])
+
+AC_CACHE_VAL(ac_cv_have_qt,
+[#try to guess Qt locations
+
+qt_incdirs=""
+for dir in $kde_qt_dirs; do
+ qt_incdirs="$qt_incdirs $dir/include $dir"
+done
+qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt $x_includes"
+if test ! "$ac_qt_includes" = "NO"; then
+ qt_incdirs="$ac_qt_includes $qt_incdirs"
+fi
+
+if test "$kde_qtver" = "2"; then
+ kde_qt_header=qstyle.h
+else
+ kde_qt_header=qglobal.h
+fi
+
+AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir)
+ac_qt_includes="$qt_incdir"
+
+qt_libdirs=""
+for dir in $kde_qt_dirs; do
+ qt_libdirs="$qt_libdirs $dir/lib $dir"
+done
+qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries"
+if test ! "$ac_qt_libraries" = "NO"; then
+ qt_libdir=$ac_qt_libraries
+else
+ qt_libdirs="$ac_qt_libraries $qt_libdirs"
+ # if the Qt was given, the chance is too big that libqt.* doesn't exist
+ qt_libdir=NONE
+ for dir in $qt_libdirs; do
+ try="ls -1 $dir/${LIBQT_GLOB}"
+ if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi
+ done
+fi
+
+ac_qt_libraries="$qt_libdir"
+
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+
+ac_cxxflags_safe="$CXXFLAGS"
+ac_ldflags_safe="$LDFLAGS"
+ac_libs_safe="$LIBS"
+
+CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
+LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS"
+LIBS="$LIBS $LIBQT"
+
+KDE_PRINT_QT_PROGRAM
+
+if AC_TRY_EVAL(ac_link) && test -s conftest; then
+ rm -f conftest*
+else
+ echo "configure: failed program was:" >&AC_FD_CC
+ cat conftest.$ac_ext >&AC_FD_CC
+ ac_qt_libraries="NO"
+fi
+rm -f conftest*
+CXXFLAGS="$ac_cxxflags_safe"
+LDFLAGS="$ac_ldflags_safe"
+LIBS="$ac_libs_safe"
+
+AC_LANG_RESTORE
+if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then
+ ac_cv_have_qt="have_qt=no"
+ ac_qt_notfound=""
+ if test "$ac_qt_includes" = NO; then
+ if test "$ac_qt_libraries" = NO; then
+ ac_qt_notfound="(headers and libraries)";
+ else
+ ac_qt_notfound="(headers)";
+ fi
+ else
+ ac_qt_notfound="(libraries)";
+ fi
+
+ AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation!
+For more details about this problem, look at the end of config.log.])
+else
+ have_qt="yes"
+fi
+])
+
+eval "$ac_cv_have_qt"
+
+if test "$have_qt" != yes; then
+ AC_MSG_RESULT([$have_qt]);
+else
+ ac_cv_have_qt="have_qt=yes \
+ ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries"
+ AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT])
+
+ qt_libraries="$ac_qt_libraries"
+ qt_includes="$ac_qt_includes"
+fi
+
+if test ! "$kde_qt_libs_given" = "yes"; then
+KDE_CHECK_QT_DIRECT(qt_libraries= ,[])
+fi
+
+AC_SUBST(qt_libraries)
+AC_SUBST(qt_includes)
+
+if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then
+ QT_INCLUDES="";
+else
+ QT_INCLUDES="-I$qt_includes"
+ all_includes="$QT_INCLUDES $all_includes"
+fi
+
+if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then
+ QT_LDFLAGS=""
+else
+ QT_LDFLAGS="-L$qt_libraries"
+ all_libraries="$all_libraries $QT_LDFLAGS"
+fi
+
+AC_SUBST(QT_INCLUDES)
+AC_SUBST(QT_LDFLAGS)
+AC_PATH_QT_MOC_UIC
+
+LIB_QT="$kde_int_qt "'$(LIBPNG) $(LIBJPEG) -lXext $(LIB_X11) $(LIBSM)'
+AC_SUBST(LIB_QT)
+
+])
+
+AC_DEFUN(AC_PATH_QT,
+[
+AC_PATH_QT_1_3
+])
+
+AC_DEFUN(KDE_CHECK_FINAL,
+[
+ AC_ARG_ENABLE(final, [ --enable-final build size optimized apps (experimental - needs lots of memory)],
+ kde_use_final=$enableval, kde_use_final=no)
+
+ KDE_COMPILER_REPO
+ if test "x$kde_use_final" = "xyes"; then
+ KDE_USE_FINAL_TRUE=""
+ KDE_USE_FINAL_FALSE="#"
+ else
+ KDE_USE_FINAL_TRUE="#"
+ KDE_USE_FINAL_FALSE=""
+ fi
+ AC_SUBST(KDE_USE_FINAL_TRUE)
+ AC_SUBST(KDE_USE_FINAL_FALSE)
+
+ AC_ARG_ENABLE(closure, [ --disable-closure don't delay template instantiation],
+ kde_use_closure=$enableval, kde_use_closure=yes)
+
+ if test "x$kde_use_closure" = "xyes"; then
+ KDE_USE_CLOSURE_TRUE=""
+ KDE_USE_CLOSURE_FALSE="#"
+# CXXFLAGS="$CXXFLAGS $REPO"
+ else
+ KDE_USE_CLOSURE_TRUE="#"
+ KDE_USE_CLOSURE_FALSE=""
+ fi
+ AC_SUBST(KDE_USE_CLOSURE_TRUE)
+ AC_SUBST(KDE_USE_CLOSURE_FALSE)
+])
+
+dnl ------------------------------------------------------------------------
+dnl Now, the same with KDE
+dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed)
+dnl and $(kde_includes) will be the kdehdrlocation (if needed)
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_BASE_PATH_KDE,
+[
+AC_PREREQ([2.13])
+AC_REQUIRE([AC_PATH_QT])dnl
+AC_CHECK_RPATH
+AC_MSG_CHECKING([for KDE])
+
+if test "${prefix}" != NONE; then
+ kde_includes=${prefix}/include
+ ac_kde_includes=$prefix/include
+
+ if test "${exec_prefix}" != NONE; then
+ kde_libraries=${exec_prefix}/lib
+ ac_kde_libraries=$exec_prefix/lib
+ else
+ kde_libraries=${prefix}/lib
+ ac_kde_libraries=$prefix/lib
+ fi
+else
+ ac_kde_includes=
+ ac_kde_libraries=
+ kde_libraries=""
+ kde_includes=""
+fi
+
+AC_CACHE_VAL(ac_cv_have_kde,
+[#try to guess kde locations
+
+if test "$kde_qtver" = 1; then
+ kde_check_header="ksock.h"
+ kde_check_lib="libkdecore.la"
+else
+ kde_check_header="ksharedptr.h"
+ kde_check_lib="libkio.la"
+fi
+
+if test -z "$1"; then
+
+kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/kde/include /usr/include/kde /usr/include /opt/kde2/include /opt/kde/include $x_includes $qt_includes"
+test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs"
+kde_incdirs="$ac_kde_includes $kde_incdirs"
+AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir)
+ac_kde_includes="$kde_incdir"
+
+if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then
+ AC_MSG_ERROR([
+in the prefix, you've chosen, are no KDE headers installed. This will fail.
+So, check this please and use another prefix!])
+fi
+
+kde_libdirs="/usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib /usr/X11R6/lib /opt/kde2/lib /opt/kde/lib /usr/X11R6/kde/lib"
+test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib $KDEDIR $kde_libdirs"
+kde_libdirs="$ac_kde_libraries $kde_libdirs"
+AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir)
+ac_kde_libraries="$kde_libdir"
+
+if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then
+AC_MSG_ERROR([
+in the prefix, you've chosen, are no KDE libraries installed. This will fail.
+So, check this please and use another prefix!])
+fi
+ac_kde_libraries="$kde_libdir"
+
+if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO; then
+ ac_cv_have_kde="have_kde=no"
+else
+ ac_cv_have_kde="have_kde=yes \
+ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
+fi
+
+else dnl test -z $1
+
+ ac_cv_have_kde="have_kde=no"
+
+fi
+])dnl
+
+eval "$ac_cv_have_kde"
+
+if test "$have_kde" != "yes"; then
+ if test "${prefix}" = NONE; then
+ ac_kde_prefix="$ac_default_prefix"
+ else
+ ac_kde_prefix="$prefix"
+ fi
+ if test "$exec_prefix" = NONE; then
+ ac_kde_exec_prefix="$ac_kde_prefix"
+ AC_MSG_RESULT([will be installed in $ac_kde_prefix])
+ else
+ ac_kde_exec_prefix="$exec_prefix"
+ AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix])
+ fi
+
+ kde_libraries="${ac_kde_exec_prefix}/lib"
+ kde_includes=${ac_kde_prefix}/include
+
+else
+ ac_cv_have_kde="have_kde=yes \
+ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
+ AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes])
+
+ kde_libraries="$ac_kde_libraries"
+ kde_includes="$ac_kde_includes"
+fi
+AC_SUBST(kde_libraries)
+AC_SUBST(kde_includes)
+
+if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" ; then
+ KDE_INCLUDES=""
+else
+ KDE_INCLUDES="-I$kde_includes"
+ all_includes="$KDE_INCLUDES $all_includes"
+fi
+
+KDE_LDFLAGS="-L$kde_libraries"
+if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then
+ all_libraries="$all_libraries $KDE_LDFLAGS"
+fi
+
+AC_SUBST(KDE_LDFLAGS)
+AC_SUBST(KDE_INCLUDES)
+
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+all_libraries="$all_libraries $USER_LDFLAGS"
+all_includes="$all_includes $USER_INCLUDES"
+AC_SUBST(all_includes)
+AC_SUBST(all_libraries)
+
+AC_SUBST(AUTODIRS)
+])
+
+AC_DEFUN(KDE_CHECK_EXTRA_LIBS,
+[
+AC_MSG_CHECKING(for extra includes)
+AC_ARG_WITH(extra-includes, [ --with-extra-includes=DIR
+ adds non standard include paths],
+ kde_use_extra_includes="$withval",
+ kde_use_extra_includes=NONE
+)
+kde_extra_includes=
+if test -n "$kde_use_extra_includes" && \
+ test "$kde_use_extra_includes" != "NONE"; then
+
+ ac_save_ifs=$IFS
+ IFS=':'
+ for dir in $kde_use_extra_includes; do
+ kde_extra_includes="$kde_extra_includes $dir"
+ USER_INCLUDES="$USER_INCLUDES -I$dir"
+ done
+ IFS=$ac_save_ifs
+ kde_use_extra_includes="added"
+else
+ kde_use_extra_includes="no"
+fi
+AC_SUBST(USER_INCLUDES)
+
+AC_MSG_RESULT($kde_use_extra_includes)
+
+kde_extra_libs=
+AC_MSG_CHECKING(for extra libs)
+AC_ARG_WITH(extra-libs, [ --with-extra-libs=DIR adds non standard library paths],
+ kde_use_extra_libs=$withval,
+ kde_use_extra_libs=NONE
+)
+if test -n "$kde_use_extra_libs" && \
+ test "$kde_use_extra_libs" != "NONE"; then
+
+ ac_save_ifs=$IFS
+ IFS=':'
+ for dir in $kde_use_extra_libs; do
+ kde_extra_libs="$kde_extra_libs $dir"
+ KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir"
+ USER_LDFLAGS="$USER_LDFLAGS -L$dir"
+ done
+ IFS=$ac_save_ifs
+ kde_use_extra_libs="added"
+else
+ kde_use_extra_libs="no"
+fi
+
+AC_SUBST(USER_LDFLAGS)
+
+AC_MSG_RESULT($kde_use_extra_libs)
+
+])
+
+AC_DEFUN(KDE_1_CHECK_PATH_HEADERS,
+[
+ AC_MSG_CHECKING([for KDE headers installed])
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+cat > conftest.$ac_ext <<EOF
+#include <stdio.h>
+#include "confdefs.h"
+#include <kapp.h>
+
+int main() {
+ printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data());
+ printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data());
+ printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data());
+ printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data());
+ printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data());
+ printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data());
+ printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data());
+ printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data());
+ printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data());
+ printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data());
+ printf("kde_wallpaperdir=\\"%s\\"\n",
+ KApplication::kde_wallpaperdir().data());
+ printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data());
+ printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data());
+ printf("kde_servicesdir=\\"/tmp/dummy\\"\n");
+ printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n");
+ printf("kde_moduledir=\\"/tmp/dummy\\"\n");
+ return 0;
+ }
+EOF
+
+ ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext'
+ if AC_TRY_EVAL(ac_compile); then
+ AC_MSG_RESULT(yes)
+ else
+ AC_MSG_ERROR([your system is not able to compile a small KDE application!
+Check, if you installed the KDE header files correctly.
+For more details about this problem, look at the end of config.log.])
+ fi
+
+ AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_CHECK_KDEQTADDON,
+[
+AC_MSG_CHECKING(for kde-qt-addon)
+AC_CACHE_VAL(kde_cv_have_kdeqtaddon,
+[
+ kde_ldflags_safe="$LDFLAGS"
+ kde_libs_safe="$LIBS"
+ kde_cxxflags_safe="$CXXFLAGS"
+
+ LIBS="-lkde-qt-addon $LIBQT $LIBS"
+ CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes"
+ LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS"
+
+ AC_TRY_LINK([
+ #include <qdom.h>
+ ],
+ [
+ QDomDocument doc;
+ ],
+ kde_cv_have_kdeqtaddon=yes,
+ kde_cv_have_kdeqtaddon=no
+ )
+
+ LDFLAGS=$kde_ldflags_safe
+ LIBS=$kde_libs_safe
+ kde_cxxflags_safe="$CXXFLAGS"
+])
+
+AC_MSG_RESULT($kde_cv_have_kdeqtaddon)
+
+if test "$kde_cv_have_kdeqtaddon" = "no"; then
+ AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first.
+It is a separate package (and CVS module) named kde-qt-addon.])
+fi
+])
+
+AC_DEFUN(KDE_CHECK_KIMGIO,
+[
+ AC_REQUIRE([AC_BASE_PATH_KDE])
+ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+ AC_REQUIRE([AC_FIND_TIFF])
+ AC_REQUIRE([AC_FIND_JPEG])
+ AC_REQUIRE([AC_FIND_PNG])
+ AC_REQUIRE([KDE_CREATE_LIBS_ALIASES])
+
+ if test "$1" = "existance"; then
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ kde_save_LIBS="$LIBS"
+ LIBS="$LIBS $all_libraries $LIBJPEG $LIBTIFF $LIBPNG $LIBQT -lm"
+ AC_CHECK_LIB(kimgio, kimgioRegister, [
+ LIBKIMGIO_EXISTS=yes],LIBKIMGIO_EXISTS=no)
+ LIBS="$kde_save_LIBS"
+ AC_LANG_RESTORE
+ else
+ LIBKIMGIO_EXISTS=yes
+ fi
+
+ if test "$LIBKIMGIO_EXISTS" = "yes"; then
+ LIB_KIMGIO='-lkimgio'
+ else
+ LIB_KIMGIO=''
+ fi
+ AC_SUBST(LIB_KIMGIO)
+])
+
+AC_DEFUN(KDE_CREATE_LIBS_ALIASES,
+[
+ AC_REQUIRE([KDE_MISC_TESTS])
+ AC_REQUIRE([KDE_CHECK_LIBDL])
+ AC_REQUIRE([K_PATH_X])
+
+if test $kde_qtver = 2; then
+ LIB_KDECORE='-lkdecore'
+ AC_SUBST(LIB_KDECORE)
+ LIB_KDEUI='-lkdeui'
+ AC_SUBST(LIB_KDEUI)
+ LIB_KFORMULA='-lkformula'
+ AC_SUBST(LIB_KFORMULA)
+ LIB_KIO='-lkio'
+ AC_SUBST(LIB_KIO)
+ LIB_KSYCOCA='-lksycoca'
+ AC_SUBST(LIB_KSYCOCA)
+ LIB_SMB='-lsmb'
+ AC_SUBST(LIB_SMB)
+ LIB_KFILE='-lkfile'
+ AC_SUBST(LIB_KFILE)
+ LIB_KAB='-lkab'
+ AC_SUBST(LIB_KAB)
+ LIB_KHTML='-lkhtml'
+ AC_SUBST(LIB_KHTML)
+ LIB_KSPELL='-lkspell'
+ AC_SUBST(LIB_KSPELL)
+ LIB_KPARTS='-lkparts'
+ AC_SUBST(LIB_KPARTS)
+ LIB_KWRITE='-lkwrite'
+ AC_SUBST(LIB_KWRITE)
+else
+ LIB_KDECORE='-lkdecore -lXext $(LIB_QT)'
+ AC_SUBST(LIB_KDECORE)
+ LIB_KDEUI='-lkdeui $(LIB_KDECORE)'
+ AC_SUBST(LIB_KDEUI)
+ LIB_KFM='-lkfm $(LIB_KDECORE)'
+ AC_SUBST(LIB_KFM)
+ LIB_KFILE='-lkfile $(LIB_KFM) $(LIB_KDEUI)'
+ AC_SUBST(LIB_KFILE)
+ LIB_KAB='-lkab $(LIB_KIMGIO) $(LIB_KDECORE)'
+ AC_SUBST(LIB_KAB)
+fi
+])
+
+AC_DEFUN(AC_PATH_KDE,
+[
+ AC_BASE_PATH_KDE
+ AC_ARG_ENABLE(path-check, [ --disable-path-check don't try to find out, where to install],
+ [
+ if test "$enableval" = "no";
+ then ac_use_path_checking="default"
+ else ac_use_path_checking=""
+ fi
+ ],
+ [
+ if test "$kde_qtver" = 1;
+ then ac_use_path_checking=""
+ else ac_use_path_checking="default"
+ fi
+ ]
+ )
+
+ AC_CREATE_KFSSTND($ac_use_path_checking)
+
+ AC_SUBST_KFSSTND
+ KDE_CREATE_LIBS_ALIASES
+])
+
+dnl obsolete
+AC_DEFUN(AC_CHECK_SETENV,
+[
+ AC_OBSOLETE([$0], [; instead use AC_CHECK_FUNCS([setenv unsetenv])])dnl
+ AC_CHECK_FUNCS([setenv unsetenv])
+])
+
+AC_DEFUN(AC_CHECK_GETDOMAINNAME,
+[
+AC_MSG_CHECKING(for getdomainname)
+AC_CACHE_VAL(ac_cv_func_getdomainname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+save_CXXFLAGS="$CXXFLAGS"
+kde_safe_LIBS="$LIBS"
+LIBS="$LIBS $X_EXTRA_LIBS"
+if test "$GCC" = "yes"; then
+CXXFLAGS="$CXXFLAGS -pedantic-errors"
+fi
+AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <unistd.h>
+],
+[
+char buffer[200];
+getdomainname(buffer, 200);
+],
+ac_cv_func_getdomainname=yes,
+ac_cv_func_getdomainname=no)
+CXXFLAGS="$save_CXXFLAGS"
+LIBS=$kde_safe_LIBS
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_getdomainname)
+
+AC_MSG_CHECKING([if getdomainname needs custom prototype])
+AC_CACHE_VAL(ac_cv_proto_getdomainname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+if eval "test \"`echo $ac_cv_func_getdomainname`\" = yes"; then
+ ac_cv_proto_getdomainname=no
+else
+ kde_safe_libs=$LIBS
+ LIBS="$LIBS $X_EXTRA_LIBS"
+ AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+
+extern "C" int getdomainname (char *, int);
+],
+[
+char buffer[200];
+getdomainname(buffer, 200);
+],
+ ac_cv_func_getdomainname=yes
+ ac_cv_proto_getdomainname=yes,
+ AC_MSG_RESULT([fatal error])
+ AC_MSG_ERROR([getdomainname unavailable]))
+fi
+LIBS=$kde_safe_libs
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_proto_getdomainname)
+
+if eval "test \"`echo $ac_cv_func_getdomainname`\" = yes"; then
+ AC_DEFINE(HAVE_GETDOMAINNAME, 1, [Define if you have getdomainname])
+fi
+if eval "test \"`echo $ac_cv_proto_getdomainname`\" = no"; then
+ AC_DEFINE(HAVE_GETDOMAINNAME_PROTO, 1,
+ [Define if you have getdomainname prototype])
+fi
+
+])
+
+AC_DEFUN(AC_CHECK_GETHOSTNAME,
+[
+
+AC_MSG_CHECKING([for gethostname])
+AC_CACHE_VAL(ac_cv_func_gethostname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+save_CXXFLAGS="$CXXFLAGS"
+if test "$GCC" = "yes"; then
+CXXFLAGS="$CXXFLAGS -pedantic-errors"
+fi
+AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+],
+[
+char buffer[200];
+gethostname(buffer, 200);
+],
+ac_cv_func_gethostname=yes,
+ac_cv_func_gethostname=no)
+CXXFLAGS="$save_CXXFLAGS"
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_gethostname)
+
+AC_MSG_CHECKING([if gethostname needs custom prototype])
+AC_CACHE_VAL(ac_cv_proto_gethostname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+if eval "test \"`echo $ac_cv_func_gethostname`\" = yes"; then
+ ac_cv_proto_gethostname=no
+else
+ AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+
+extern "C" int gethostname (char *, int);
+],
+[
+char buffer[200];
+gethostname(buffer, 200);
+],
+ ac_cv_func_gethostname=yes
+ ac_cv_proto_gethostname=yes,
+ AC_MSG_RESULT([fatal error])
+ AC_MSG_ERROR(gethostname unavailable))
+fi
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_proto_gethostname)
+
+if eval "test \"`echo $ac_cv_proto_gethostname`\" = no"; then
+ AC_DEFINE(HAVE_GETHOSTNAME_PROTO, 1,
+ [Define if you have gethostname prototype])
+fi
+if eval "test \"`echo $ac_cv_func_gethostname`\" = yes"; then
+ AC_DEFINE(HAVE_GETHOSTNAME, 1, [Define if you have getdomainname])
+fi
+])
+
+AC_DEFUN(AC_CHECK_USLEEP,
+[
+AC_MSG_CHECKING([for usleep])
+AC_CACHE_VAL(ac_cv_func_usleep,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_libs_safe="$LIBS"
+LIBS="$LIBS $LIBUCB"
+AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+],
+[
+usleep(200);
+],
+ac_cv_func_usleep=yes,
+ac_cv_func_usleep=no)
+LIBS="$ac_libs_safe"
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_usleep)
+if eval "test \"`echo $ac_cv_func_usleep`\" = yes"; then
+ AC_DEFINE(HAVE_USLEEP, 1, [Define if you have the usleep function])
+fi
+])
+
+AC_DEFUN(AC_CHECK_RANDOM,
+[
+AC_MSG_CHECKING([for random])
+AC_CACHE_VAL(ac_cv_func_random,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_libs_safe="$LIBS"
+LIBS="$LIBS $LIBUCB"
+AC_TRY_LINK([
+#include <stdlib.h>
+],
+[
+random();
+],
+ac_cv_func_random=yes,
+ac_cv_func_random=no)
+LIBS="$ac_libs_safe"
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_random)
+if eval "test \"`echo $ac_cv_func_random`\" = yes"; then
+ AC_DEFINE(HAVE_RANDOM, 1, [Define if you have random])
+fi
+])
+
+AC_DEFUN(AC_FIND_GIF,
+ [AC_MSG_CHECKING([for giflib])
+AC_CACHE_VAL(ac_cv_lib_gif,
+[ac_save_LIBS="$LIBS"
+LIBS="$all_libraries -lgif -lX11 $LIBSOCKET"
+AC_TRY_LINK(dnl
+[
+#ifdef __cplusplus
+extern "C" {
+#endif
+int GifLastError(void);
+#ifdef __cplusplus
+}
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+],
+ [return GifLastError();],
+ eval "ac_cv_lib_gif=yes",
+ eval "ac_cv_lib_gif=no")
+LIBS="$ac_save_LIBS"
+])dnl
+if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then
+ AC_MSG_RESULT(yes)
+ AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif])
+else
+ AC_MSG_ERROR(You need giflib30. Please install the kdesupport package)
+fi
+])
+
+AC_DEFUN(KDE_FIND_JPEG_HELPER,
+[
+AC_MSG_CHECKING([for libjpeg$2])
+AC_CACHE_VAL(ac_cv_lib_jpeg_$1,
+[
+AC_LANG_C
+ac_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+AC_TRY_LINK(
+[/* Override any gcc2 internal prototype to avoid an error. */
+struct jpeg_decompress_struct;
+typedef struct jpeg_decompress_struct * j_decompress_ptr;
+typedef int size_t;
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void jpeg_CreateDecompress(j_decompress_ptr cinfo,
+ int version, size_t structsize);
+#ifdef __cplusplus
+}
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+],
+ [jpeg_CreateDecompress(0L, 0, 0);],
+ eval "ac_cv_lib_jpeg_$1=-ljpeg$2",
+ eval "ac_cv_lib_jpeg_$1=no")
+LIBS="$ac_save_LIBS"
+CFLAGS="$ac_save_CFLAGS"
+])
+
+if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then
+ LIBJPEG="$ac_cv_lib_jpeg_$1"
+ AC_MSG_RESULT($ac_cv_lib_jpeg_$1)
+else
+ AC_MSG_RESULT(no)
+ $3
+fi
+
+])
+
+AC_DEFUN(AC_FIND_JPEG,
+[
+dnl first look for libraries
+KDE_FIND_JPEG_HELPER(6b, 6b,
+ KDE_FIND_JPEG_HELPER(normal, [],
+ [
+dnl what to do, if the normal way fails:
+ if test -f "$kde_libraries/libjpeg.so"; then
+ test -f ./libjpegkde.so || $LN_S $kde_libraries/libjpeg.so ./libjpegkde.so
+ ac_cv_lib_jpeg="-L\${topdir} -ljpegkde"
+ else if test -f "$kde_libraries/libjpeg.sl"; then
+ test -f ./libjpegkde.sl ||$LN_S $kde_libraries/libjpeg.sl ./libjpegkde.sl
+ ac_cv_lib_jpeg="-L\${topdir} -ljpegkde"
+ else if test -f "$kde_libraries/libjpeg.a"; then
+ test -f ./libjpegkde.a || $LN_S $kde_libraries/libjpeg.a ./libjpegkde.a
+ ac_cv_lib_jpeg="-L\${topdir} -ljpegkde"
+ else
+ ac_cv_lib_jpeg=
+ fi
+ fi
+ fi
+
+ LIBJPEG=$ac_cv_lib_jpeg
+]))
+
+dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h
+dnl requires system dependent includes loaded before it)
+jpeg_incdirs="/usr/include /usr/local/include $kde_extra_includes"
+AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir)
+test "x$jpeg_incdir" = xNO && jpeg_incdir=
+
+dnl if headers _and_ libraries are missing, this is no error, and we
+dnl continue with a warning (the user will get no jpeg support in khtml)
+dnl if only one is missing, it means a configuration error, but we still
+dnl only warn
+if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then
+ AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg])
+else
+ if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then
+ AC_MSG_WARN([
+There is an installation error in jpeg support. You seem to have only one
+of either the headers _or_ the libraries installed. You may need to either
+provide correct --with-extra-... options, or the development package of
+libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
+Disabling JPEG support.
+])
+ else
+ AC_MSG_WARN([libjpeg not found. disable JPEG support.])
+ fi
+ jpeg_incdir=
+ LIBJPEG=
+fi
+
+AC_SUBST(LIBJPEG)
+])
+
+AC_DEFUN(AC_FIND_ZLIB,
+[
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+AC_MSG_CHECKING([for libz])
+AC_CACHE_VAL(ac_cv_lib_z,
+[
+AC_LANG_C
+kde_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET"
+kde_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+AC_TRY_LINK(dnl
+[
+#include<zlib.h>
+],
+ [return (zlibVersion() == ZLIB_VERSION); ],
+ eval "ac_cv_lib_z='-lz'",
+ eval "ac_cv_lib_z=no")
+LIBS="$kde_save_LIBS"
+CFLAGS="$kde_save_CFLAGS"
+])dnl
+if test ! "$ac_cv_lib_z" = no; then
+ AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz])
+ LIBZ="$ac_cv_lib_z"
+ AC_SUBST(LIBZ)
+ AC_MSG_RESULT($ac_cv_lib_z)
+else
+ AC_MSG_ERROR(not found. Check your installation and look into config.log)
+ LIBZ=""
+ AC_SUBST(LIBZ)
+fi
+])
+
+AC_DEFUN(KDE_TRY_TIFFLIB,
+[
+AC_MSG_CHECKING([for libtiff $1])
+
+AC_CACHE_VAL(kde_cv_libtiff_$1,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+kde_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm"
+kde_save_CXXFLAGS="$CXXFLAGS"
+CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES"
+
+AC_TRY_LINK(dnl
+[
+#include<tiffio.h>
+],
+ [return (TIFFOpen( "", "r") == 0); ],
+[
+ kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ"
+], [
+ kde_cv_libtiff_$1=no
+])
+
+LIBS="$kde_save_LIBS"
+CXXFLAGS="$kde_save_CXXFLAGS"
+AC_LANG_RESTORE
+])
+
+if test "$kde_cv_libtiff_$1" = "no"; then
+ AC_MSG_RESULT(no)
+ LIBTIFF=""
+ $3
+else
+ LIBTIFF="$kde_cv_libtiff_$1"
+ AC_MSG_RESULT(yes)
+ AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff])
+ $2
+fi
+
+])
+
+AC_DEFUN(AC_FIND_TIFF,
+[
+AC_REQUIRE([K_PATH_X])
+AC_REQUIRE([AC_FIND_ZLIB])
+AC_REQUIRE([AC_FIND_JPEG])
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+KDE_TRY_TIFFLIB(tiff, [],
+ KDE_TRY_TIFFLIB(tiff34))
+
+AC_SUBST(LIBTIFF)
+])
+
+
+AC_DEFUN(AC_FIND_PNG,
+[
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+AC_REQUIRE([AC_FIND_ZLIB])
+AC_MSG_CHECKING([for libpng])
+AC_CACHE_VAL(ac_cv_lib_png,
+[
+kde_save_LIBS="$LIBS"
+LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET"
+kde_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+AC_LANG_C
+AC_TRY_LINK(dnl
+ [
+ #include<png.h>
+ ],
+ [
+ png_structp png_ptr = png_create_read_struct( /* image ptr */
+ PNG_LIBPNG_VER_STRING, 0, 0, 0 );
+ return( png_ptr != 0 );
+ ],
+ eval "ac_cv_lib_png='-lpng $LIBZ -lm'",
+ eval "ac_cv_lib_png=no"
+)
+LIBS="$kde_save_LIBS"
+CFLAGS="$kde_save_CFLAGS"
+])dnl
+if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then
+ AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng])
+ LIBPNG="$ac_cv_lib_png"
+ AC_SUBST(LIBPNG)
+ AC_MSG_RESULT($ac_cv_lib_png)
+else
+ AC_MSG_RESULT(no)
+ LIBPNG=""
+ AC_SUBST(LIBPNG)
+fi
+])
+
+AC_DEFUN(AC_CHECK_BOOL,
+[
+ AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool])
+])
+
+AC_DEFUN(AC_CHECK_GNU_EXTENSIONS,
+[
+AC_MSG_CHECKING(if you need GNU extensions)
+AC_CACHE_VAL(ac_cv_gnu_extensions,
+[
+cat > conftest.c << EOF
+#include <features.h>
+
+#ifdef __GNU_LIBRARY__
+yes
+#endif
+EOF
+
+if (eval "$ac_cpp conftest.c") 2>&5 |
+ egrep "yes" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_gnu_extensions=yes
+else
+ ac_cv_gnu_extensions=no
+fi
+])
+
+AC_MSG_RESULT($ac_cv_gnu_extensions)
+if test "$ac_cv_gnu_extensions" = "yes"; then
+ AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions])
+fi
+])
+
+AC_DEFUN(KDE_CHECK_COMPILER_FLAG,
+[
+AC_REQUIRE([AC_CHECK_COMPILERS])
+AC_MSG_CHECKING(whether $CXX supports -$1)
+kde_cache=`echo $1 | sed 'y%.=/+-%___p_%'`
+AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache,
+[
+echo 'int main() { return 0; }' >conftest.cc
+eval "kde_cv_prog_cxx_$kde_cache=no"
+if test -z "`$CXX -$1 -c conftest.cc 2>&1`"; then
+ if test -z "`$CXX -$1 -o conftest conftest.o 2>&1`"; then
+ eval "kde_cv_prog_cxx_$kde_cache=yes"
+ fi
+fi
+rm -f conftest*
+])
+if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
+ AC_MSG_RESULT(yes)
+ :
+ $2
+else
+ AC_MSG_RESULT(no)
+ :
+ $3
+fi
+])
+
+AC_DEFUN(KDE_PROG_CC_PG,
+[ AC_CACHE_CHECK(whether ${CC-cc} accepts -pg, kde_cv_prog_cc_pg,
+ [echo 'void f(){}' > conftest.c
+ if test -z "`${CC-cc} -pg -c conftest.c 2>&1`"; then
+ kde_cv_prog_cc_pg=yes
+ else
+ kde_cv_prog_cc_pg=no
+ fi
+ rm -f conftest*
+])])
+
+AC_DEFUN(KDE_PROG_CXX_PG,
+[ AC_CACHE_CHECK(whether ${CXX-g++} accepts -pg, kde_cv_prog_cxx_pg,
+ [echo 'void f(){}' > conftest.cc
+ if test -z "`${CXX-g++} -pg -c conftest.cc 2>&1`"; then
+ kde_cv_prog_cxx_pg=yes
+ else
+ kde_cv_prog_cxx_pg=no
+ fi
+ rm -f conftest*
+])])
+
+dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables
+dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever])
+dnl it's all white-space separated
+AC_DEFUN(AC_REMOVE_FORBIDDEN,
+[ __val=$$1
+ __forbid=" $2 "
+ if test -n "$__val"; then
+ __new=""
+ ac_save_IFS=$IFS
+ IFS=" "
+ for i in $__val; do
+ case "$__forbid" in
+ *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;;
+ *) # Careful to not add spaces, where there were none, because otherwise
+ # libtool gets confused, if we change e.g. CXX
+ if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
+ esac
+ done
+ IFS=$ac_save_IFS
+ $1=$__new
+ fi
+])
+
+dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given
+AC_DEFUN(AC_VALIDIFY_CXXFLAGS,
+[dnl
+ AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath])
+ AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath])
+])
+
+AC_DEFUN(AC_CHECK_COMPILERS,
+[
+ dnl this is somehow a fat lie, but prevents other macros from double checking
+ AC_PROVIDE([AC_PROG_CC])
+ AC_PROVIDE([AC_PROG_CPP])
+ AC_PROVIDE([AC_PROG_CXX])
+ AC_PROVIDE([AC_PROG_CXXCPP])
+
+ AC_ARG_ENABLE(debug,[ --enable-debug enables debug symbols [default=no]],
+ [
+ if test $enableval = "no"; dnl
+ then
+ kde_use_debug_code="no"
+ kde_use_debug_define=yes
+ else
+ kde_use_debug_code="yes"
+ kde_use_debug_define=no
+ fi
+ ], [kde_use_debug_code="no"
+ kde_use_debug_define=no
+ ])
+ dnl Just for configure --help
+ AC_ARG_ENABLE(dummyoption,[ --disable-debug disables debug output and debug symbols [default=no]],[],[])
+
+ AC_ARG_ENABLE(strict,[ --enable-strict compiles with strict compiler options (may not work!)],
+ [
+ if test $enableval = "no"; then
+ kde_use_strict_options="no"
+ else
+ kde_use_strict_options="yes"
+ fi
+ ], [kde_use_strict_options="no"])
+
+ AC_ARG_ENABLE(profile,[ --enable-profile creates profiling infos [default=no]],
+ [kde_use_profiling=$enableval],
+ [kde_use_profiling="no"]
+ )
+
+dnl this was AC_PROG_CC. I had to include it manualy, since I had to patch it
+ AC_MSG_CHECKING(for a C-Compiler)
+ dnl if there is one, print out. if not, don't matter
+ AC_MSG_RESULT($CC)
+
+ if test -z "$CC"; then AC_CHECK_PROG(CC, gcc, gcc) fi
+ if test -z "$CC"; then AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) fi
+ if test -z "$CC"; then AC_CHECK_PROG(CC, xlc, xlc) fi
+ test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
+
+ AC_PROG_CC_WORKS
+ AC_PROG_CC_GNU
+
+ if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+ else
+ GCC=
+ fi
+
+ USER_CFLAGS=$CFLAGS
+ CFLAGS=
+
+ if test -z "$CFLAGS"; then
+ if test "$kde_use_debug_code" = "yes"; then
+ AC_PROG_CC_G
+ if test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g"
+ case $host in
+ *-*-linux-gnu)
+ CFLAGS="$CFLAGS -ansi -W -Wall -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE -D_BSD_SOURCE"
+ ;;
+ esac
+ fi
+ else
+ if test "$GCC" = "yes"; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=""
+ fi
+ if test "$kde_use_debug_define" = "yes"; then
+ CFLAGS="$CFLAGS -DNDEBUG"
+ dnl damn buggy compilers :-(
+ dnl if test "$GCC" = "yes"; then
+ dnl CFLAGS="$CFLAGS -fomit-frame-pointer"
+ dnl CXXFLAGS="$CXXFLAGS -fomit-frame-pointer"
+ dnl fi
+ fi
+ fi
+
+ if test "$kde_use_profiling" = yes; then
+ KDE_PROG_CC_PG
+ if test "$kde_cv_prog_cc_pg" = yes; then
+ CFLAGS="$CFLAGS -pg"
+ fi
+ fi
+
+ if test "$GCC" = "yes"; then
+ CFLAGS="$CFLAGS"
+
+ if test "$kde_use_strict_options" = "yes"; then
+ CFLAGS="$CFLAGS -W -Wall -ansi -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings"
+ fi
+ fi
+
+ fi
+
+ case "$host" in
+ *-*-sysv4.2uw*) CFLAGS="$CFLAGS -D_UNIXWARE";;
+ *-*-sysv5uw7*) CFLAGS="$CFLAGS -D_UNIXWARE7";;
+ esac
+
+ if test -n "$USER_CFLAGS"; then
+ CFLAGS="$CFLAGS $USER_CFLAGS"
+ fi
+
+ if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then
+ LDFLAGS=""
+ fi
+
+
+dnl this is AC_PROG_CPP. I had to include it here, since autoconf checks
+dnl dependecies between AC_PROG_CPP and AC_PROG_CC (or is it automake?)
+
+ AC_MSG_CHECKING(how to run the C preprocessor)
+ # On Suns, sometimes $CPP names a directory.
+ if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+ fi
+ if test -z "$CPP"; then
+ AC_CACHE_VAL(ac_cv_prog_CPP,
+ [ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ dnl Use a header file that comes with gcc, so configuring glibc
+ dnl with a fresh cross-compiler works.
+ AC_TRY_CPP([#include <assert.h>
+ Syntax Error], ,
+ CPP="${CC-cc} -E -traditional-cpp"
+ AC_TRY_CPP([#include <assert.h>
+ Syntax Error], , CPP=/lib/cpp))
+ ac_cv_prog_CPP="$CPP"])dnl
+ CPP="$ac_cv_prog_CPP"
+ else
+ ac_cv_prog_CPP="$CPP"
+ fi
+ AC_MSG_RESULT($CPP)
+ AC_SUBST(CPP)dnl
+
+
+ AC_MSG_CHECKING(for a C++-Compiler)
+ dnl if there is one, print out. if not, don't matter
+ AC_MSG_RESULT($CXX)
+
+ if test -z "$CXX"; then AC_CHECK_PROG(CXX, g++, g++) fi
+ if test -z "$CXX"; then AC_CHECK_PROG(CXX, CC, CC) fi
+ if test -z "$CXX"; then AC_CHECK_PROG(CXX, xlC, xlC) fi
+ if test -z "$CXX"; then AC_CHECK_PROG(CXX, DCC, DCC) fi
+ test -z "$CXX" && AC_MSG_ERROR([no acceptable C++-compiler found in \$PATH])
+
+ AC_PROG_CXX_WORKS
+ AC_PROG_CXX_GNU
+
+ if test $ac_cv_prog_gxx = yes; then
+ GXX=yes
+ fi
+
+ USER_CXXFLAGS=$CXXFLAGS
+ CXXFLAGS=""
+
+ if test -z "$CXXFLAGS"; then
+ if test "$kde_use_debug_code" = "yes"; then
+ AC_PROG_CXX_G
+ if test $ac_cv_prog_cxx_g = yes; then
+ CXXFLAGS="-g"
+ case $host in dnl
+ *-*-linux-gnu)
+ CXXFLAGS="$CXXFLAGS -ansi -D_XOPEN_SOURCE -D_BSD_SOURCE -Wbad-function-cast -Wcast-align -Wundef -Wconversion"
+ ;;
+ esac
+ fi
+ else
+ if test "$GXX" = "yes"; then
+ CXXFLAGS="-O2"
+ fi
+ if test "$kde_use_debug_define" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -DNDEBUG"
+ fi
+ fi
+
+ if test "$kde_use_profiling" = yes; then
+ KDE_PROG_CXX_PG
+ if test "$kde_cv_prog_cxx_pg" = yes; then
+ CXXFLAGS="$CXXFLAGS -pg"
+ fi
+ fi
+
+ KDE_CHECK_COMPILER_FLAG(fno-exceptions,
+ [
+ CXXFLAGS="$CXXFLAGS -fno-exceptions"
+ ])
+
+dnl WABA: Nothing wrong with RTTI, keep it on.
+dnl KDE_CHECK_COMPILER_FLAG(fno-rtti,
+dnl [
+dnl CXXFLAGS="$CXXFLAGS -fno-rtti"
+dnl ])
+
+ KDE_CHECK_COMPILER_FLAG(fno-check-new,
+ [
+ CXXFLAGS="$CXXFLAGS -fno-check-new"
+ ])
+
+ if test "$GXX" = "yes"; then
+ CXXFLAGS="$CXXFLAGS"
+
+ if test true || test "$kde_use_debug_code" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings"
+
+ KDE_CHECK_COMPILER_FLAG(Wno-long-long,
+ [
+ CXXFLAGS="$CXXFLAGS -Wno-long-long"
+ ])
+ KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,
+ [
+ CXXFLAGS="$CXXFLAGS -Wnon-virtual-dtor"
+ ])
+ KDE_CHECK_COMPILER_FLAG(fno-builtin,
+ [
+ CXXFLAGS="$CXXFLAGS -fno-builtin"
+ ])
+
+ fi
+
+ if test "$kde_use_strict_options" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -Wcast-qual -Wbad-function-cast -Wshadow -Wcast-align"
+ fi
+
+ if test "$kde_very_strict" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -Wold-style-cast -Wredundant-decls -Wconversion"
+ fi
+ fi
+ fi
+
+ KDE_CHECK_COMPILER_FLAG(fexceptions,
+ [
+ USE_EXCEPTIONS="-fexceptions"
+ ],
+ USE_EXCEPTIONS=
+ )
+ AC_SUBST(USE_EXCEPTIONS)
+
+ KDE_CHECK_COMPILER_FLAG(frtti,
+ [
+ USE_RTTI="-frtti"
+ ],
+ USE_RTTI=
+ )
+ AC_SUBST(USE_RTTI)
+
+ case "$host" in
+ *-*-irix*) test "$GXX" = yes && CXXFLAGS="$CXXFLAGS -D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS" ;;
+ *-*-sysv4.2uw*) CXXFLAGS="$CXXFLAGS -D_UNIXWARE";;
+ *-*-sysv5uw7*) CXXFLAGS="$CXXFLAGS -D_UNIXWARE7";;
+ *-*-solaris*)
+ if test "$GXX" = yes; then
+ libstdcpp=`gcc -print-file-name=libstdc++.so`
+ if test ! -f $libstdcpp; then
+ AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so])
+ fi
+ fi
+ ;;
+ esac
+
+ if test -n "$USER_CXXFLAGS"; then
+ CXXFLAGS="$CXXFLAGS $USER_CXXFLAGS"
+ fi
+
+ AC_VALIDIFY_CXXFLAGS
+
+ AC_MSG_CHECKING(how to run the C++ preprocessor)
+ if test -z "$CXXCPP"; then
+ AC_CACHE_VAL(ac_cv_prog_CXXCPP,
+ [
+ AC_LANG_SAVE[]dnl
+ AC_LANG_CPLUSPLUS[]dnl
+ CXXCPP="${CXX-g++} -E"
+ AC_TRY_CPP([#include <stdlib.h>], , CXXCPP=/lib/cpp)
+ ac_cv_prog_CXXCPP="$CXXCPP"
+ AC_LANG_RESTORE[]dnl
+ ])dnl
+ CXXCPP="$ac_cv_prog_CXXCPP"
+ fi
+ AC_MSG_RESULT($CXXCPP)
+ AC_SUBST(CXXCPP)dnl
+
+ # the following is to allow programs, that are known to
+ # have problems when compiled with -O2
+ if test -n "$CXXFLAGS"; then
+ kde_safe_IFS=$IFS
+ IFS=" "
+ NOOPT_CXXFLAGS=""
+ for i in $CXXFLAGS; do
+ case $i in
+ -O*)
+ ;;
+ *)
+ NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS $i"
+ ;;
+ esac
+ done
+ IFS=$kde_safe_IFS
+ fi
+ AC_SUBST(NOOPT_CXXFLAGS)
+
+ KDE_CHECK_FINAL
+
+ ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), [])
+
+ KDE_CXXFLAGS=
+ AC_SUBST(KDE_CXXFLAGS)
+])
+
+AC_DEFUN(KDE_ADD_DEPENDENCIES,
+[
+ [A]M_DEPENDENCIES(CC)
+ [A]M_DEPENDENCIES(CXX)
+])
+
+dnl just a wrapper to clean up configure.in
+AC_DEFUN(KDE_PROG_LIBTOOL,
+[
+AC_REQUIRE([AC_CHECK_COMPILERS])
+AC_REQUIRE([AC_ENABLE_SHARED])
+AC_REQUIRE([AC_ENABLE_STATIC])
+
+AC_REQUIRE([AC_LIBTOOL_DLOPEN])
+
+AC_LANG_SAVE
+AC_LANG_C
+AC_OBJEXT
+AC_EXEEXT
+AC_LANG_RESTORE
+
+AM_PROG_LIBTOOL
+AC_LIBTOOL_CXX
+
+LIBTOOL_SHELL="/bin/sh ./libtool"
+# LIBTOOL="$LIBTOOL --silent"
+KDE_PLUGIN="-avoid-version -module -no-undefined"
+AC_SUBST(KDE_PLUGIN)
+])
+
+AC_DEFUN(KDE_CHECK_TYPES,
+[ AC_CHECK_SIZEOF(int, 4)dnl
+ AC_CHECK_SIZEOF(long, 4)dnl
+ AC_CHECK_SIZEOF(char *, 4)dnl
+])dnl
+
+AC_DEFUN(KDE_DO_IT_ALL,
+[
+AC_CANONICAL_SYSTEM
+AC_ARG_PROGRAM
+AM_INIT_AUTOMAKE($1, $2)
+AM_DISABLE_LIBRARIES
+AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde})
+AC_CHECK_COMPILERS
+KDE_PROG_LIBTOOL
+AM_KDE_WITH_NLS
+AC_PATH_KDE
+])
+
+AC_DEFUN(AC_CHECK_RPATH,
+[
+AC_MSG_CHECKING(for rpath)
+AC_ARG_ENABLE(rpath,
+ [ --disable-rpath do not use the rpath feature of ld],
+ USE_RPATH=$enableval, USE_RPATH=yes)
+
+if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then
+
+ KDE_RPATH="-R \$(kde_libraries)"
+
+ if test -n "$qt_libraries"; then
+ KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)"
+ fi
+ dnl $x_libraries is set to /usr/lib in case
+ if test -n "$X_LDFLAGS"; then
+ KDE_RPATH="$KDE_RPATH -R \$(x_libraries)"
+ fi
+ if test -n "$KDE_EXTRA_RPATH"; then
+ KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)"
+ fi
+fi
+AC_SUBST(KDE_EXTRA_RPATH)
+AC_SUBST(KDE_RPATH)
+AC_MSG_RESULT($USE_RPATH)
+])
+
+dnl Check for the type of the third argument of getsockname
+AC_DEFUN(AC_CHECK_KSIZE_T,
+[AC_MSG_CHECKING(for the third argument of getsockname)
+AC_CACHE_VAL(ac_cv_ksize_t,
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+[AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/socket.h>
+],[
+socklen_t a=0;
+getsockname(0,(struct sockaddr*)0, &a);
+],
+ac_cv_ksize_t=socklen_t,
+ac_cv_ksize_t=)
+if test -z "$ac_cv_ksize_t"; then
+ac_safe_cxxflags="$CXXFLAGS"
+if test "$GCC" = "yes"; then
+ CXXFLAGS="-Werror $CXXFLAGS"
+fi
+AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/socket.h>
+],[
+int a=0;
+getsockname(0,(struct sockaddr*)0, &a);
+],
+ac_cv_ksize_t=int,
+ac_cv_ksize_t=size_t)
+CXXFLAGS="$ac_safe_cxxflags"
+fi
+AC_LANG_RESTORE
+])
+
+if test -z "$ac_cv_ksize_t"; then
+ ac_cv_ksize_t=int
+fi
+
+AC_MSG_RESULT($ac_cv_ksize_t)
+AC_DEFINE_UNQUOTED(ksize_t, $ac_cv_ksize_t,
+ [Define the type of the third argument for getsockname]
+)
+
+])
+
+dnl This is a merge of some macros out of the gettext aclocal.m4
+dnl since we don't need anything, I took the things we need
+dnl the copyright for them is:
+dnl >
+dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+dnl This Makefile.in is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+dnl >
+dnl for this file it is relicensed under LGPL
+
+AC_DEFUN(AM_KDE_WITH_NLS,
+ [
+ dnl If we use NLS figure out what method
+
+ AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt,
+ [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+
+ if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then
+ AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it])
+ GMSGFMT=":"
+ fi
+ MSGFMT=$GMSGFMT
+ AC_SUBST(GMSGFMT)
+ AC_SUBST(MSGFMT)
+
+ AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+
+ dnl Test whether we really found GNU xgettext.
+ if test "$XGETTEXT" != ":"; then
+ dnl If it is no GNU xgettext we define it as : so that the
+ dnl Makefiles still can work.
+ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+ : ;
+ else
+ AC_MSG_RESULT(
+ [found xgettext programs is not GNU xgettext; ignore it])
+ XGETTEXT=":"
+ fi
+ fi
+ AC_SUBST(XGETTEXT)
+
+ ])
+
+# Search path for a program which passes the given test.
+# Ulrich Drepper <drepper at cygnus.com>, 1996.
+
+# serial 1
+# Stephan Kulow: I appended a _KDE against name conflicts
+
+dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN(AM_PATH_PROG_WITH_TEST_KDE,
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ /*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test -n "[$]$1"; then
+ AC_MSG_RESULT([$]$1)
+else
+ AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
+
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+# Ulrich Drepper <drepper at cygnus.com>, 1995.
+
+# serial 1
+
+AC_DEFUN(AM_LC_MESSAGES,
+ [if test $ac_cv_header_locale_h = yes; then
+ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+ [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES])
+ fi
+ fi])
+
+dnl From Jim Meyering.
+dnl FIXME: migrate into libit.
+
+AC_DEFUN(AM_FUNC_OBSTACK,
+[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack,
+ [AC_TRY_LINK([#include "obstack.h"],
+ [struct obstack *mem;obstack_free(mem,(char *) 0)],
+ am_cv_func_obstack=yes,
+ am_cv_func_obstack=no)])
+ if test $am_cv_func_obstack = yes; then
+ AC_DEFINE(HAVE_OBSTACK)
+ else
+ LIBOBJS="$LIBOBJS obstack.o"
+ fi
+])
+
+dnl From Jim Meyering. Use this if you use the GNU error.[ch].
+dnl FIXME: Migrate into libit
+
+AC_DEFUN(AM_FUNC_ERROR_AT_LINE,
+[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line,
+ [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");],
+ am_cv_lib_error_at_line=yes,
+ am_cv_lib_error_at_line=no)])
+ if test $am_cv_lib_error_at_line = no; then
+ LIBOBJS="$LIBOBJS error.o"
+ fi
+ AC_SUBST(LIBOBJS)dnl
+])
+
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper at cygnus.com>, 1995.
+
+# serial 1
+# Stephan Kulow: I put a KDE in it to avoid name conflicts
+
+AC_DEFUN(AM_KDE_GNU_GETTEXT,
+ [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_RANLIB])dnl
+ AC_REQUIRE([AC_HEADER_STDC])dnl
+ AC_REQUIRE([AC_TYPE_OFF_T])dnl
+ AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+ AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+ AC_REQUIRE([AC_FUNC_MMAP])dnl
+ AC_REQUIRE([AM_KDE_WITH_NLS])dnl
+ AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h string.h values.h alloca.h])
+ AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
+__argz_count __argz_stringify __argz_next])
+
+ AC_MSG_CHECKING(for stpcpy)
+ AC_CACHE_VAL(kde_cv_func_stpcpy,
+ [
+ kde_safe_cxxflags=$CXXFLAGS
+ CXXFLAGS="-Wmissing-prototypes -Werror"
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_COMPILE([
+ #include <string.h>
+ ],
+ [
+ char buffer[200];
+ stpcpy(buffer, buffer);
+ ],
+ kde_cv_func_stpcpy=yes,
+ kde_cv_func_stpcpy=no)
+ AC_LANG_RESTORE
+ CXXFLAGS=$kde_safe_cxxflags
+ ])
+ AC_MSG_RESULT($kde_cv_func_stpcpy)
+ if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then
+ AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy])
+ fi
+
+ AM_LC_MESSAGES
+
+ if test "x$CATOBJEXT" != "x"; then
+ if test "x$ALL_LINGUAS" = "x"; then
+ LINGUAS=
+ else
+ AC_MSG_CHECKING(for catalogs to be installed)
+ NEW_LINGUAS=
+ for lang in ${LINGUAS=$ALL_LINGUAS}; do
+ case "$ALL_LINGUAS" in
+ *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+ esac
+ done
+ LINGUAS=$NEW_LINGUAS
+ AC_MSG_RESULT($LINGUAS)
+ fi
+
+ dnl Construct list of names of catalog files to be constructed.
+ if test -n "$LINGUAS"; then
+ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+ fi
+ fi
+
+ ])
+
+AC_DEFUN(AC_HAVE_XPM,
+ [AC_REQUIRE_CPP()dnl
+ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+ test -z "$XPM_LDFLAGS" && XPM_LDFLAGS=
+ test -z "$XPM_INCLUDE" && XPM_INCLUDE=
+
+ AC_ARG_WITH(xpm, [ --without-xpm disable color pixmap XPM tests],
+ xpm_test=$withval, xpm_test="yes")
+ if test "x$xpm_test" = xno; then
+ ac_cv_have_xpm=no
+ else
+ AC_MSG_CHECKING(for XPM)
+ AC_CACHE_VAL(ac_cv_have_xpm,
+ [
+ AC_LANG_C
+ ac_save_ldflags="$LDFLAGS"
+ ac_save_cflags="$CFLAGS"
+ LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET"
+ CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES"
+ test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS"
+ AC_TRY_LINK([#include <X11/xpm.h>],[],
+ ac_cv_have_xpm="yes",ac_cv_have_xpm="no")
+ LDFLAGS="$ac_save_ldflags"
+ CFLAGS="$ac_save_cflags"
+ ])dnl
+
+ if test "$ac_cv_have_xpm" = no; then
+ AC_MSG_RESULT(no)
+ XPM_LDFLAGS=""
+ XPMINC=""
+ $2
+ else
+ AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support])
+ if test "$XPM_LDFLAGS" = ""; then
+ XPMLIB='-lXpm $(LIB_X11)'
+ else
+ XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)'
+ fi
+ if test "$XPM_INCLUDE" = ""; then
+ XPMINC=""
+ else
+ XPMINC="-I$XPM_INCLUDE"
+ fi
+ AC_MSG_RESULT(yes)
+ $1
+ fi
+ fi
+ AC_SUBST(XPMINC)
+ AC_SUBST(XPMLIB)
+])
+
+AC_DEFUN(AC_HAVE_DPMS,
+ [AC_REQUIRE_CPP()dnl
+ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+ test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS=
+ test -z "$DPMS_INCLUDE" && DPMS_INCLUDE=
+ DPMS_LIB=
+
+ AC_ARG_WITH(dpms, [ --without-dpms disable DPMS power saving],
+ dpms_test=$withval, dpms_test="yes")
+ if test "x$dpms_test" = xno; then
+ ac_cv_have_dpms=no
+ else
+ AC_MSG_CHECKING(for DPMS)
+ dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms.
+ dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms".
+ AC_CACHE_VAL(ac_cv_have_dpms,
+ [
+ AC_LANG_C
+ ac_save_ldflags="$LDFLAGS"
+ ac_save_cflags="$CFLAGS"
+ ac_save_libs="$LIBS"
+ LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET"
+ CFLAGS="$CFLAGS $X_INCLUDES"
+ test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS"
+ AC_TRY_LINK([
+ #include <X11/Xproto.h>
+ #include <X11/X.h>
+ #include <X11/Xlib.h>
+ #include <X11/extensions/dpms.h>
+ int foo_test_dpms()
+ { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[],
+ ac_cv_have_dpms="yes", [
+ LDFLAGS="$ac_save_ldflags"
+ CFLAGS="$ac_save_cflags"
+ LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET"
+ LIBS="$LIBS -lXdpms"
+ CFLAGS="$CFLAGS $X_INCLUDES"
+ test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS"
+ AC_TRY_LINK([
+ #include <X11/Xproto.h>
+ #include <X11/X.h>
+ #include <X11/Xlib.h>
+ #include <X11/extensions/dpms.h>
+ int foo_test_dpms()
+ { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[],
+ [
+ ac_cv_have_dpms="-lXdpms"
+ ],ac_cv_have_dpms="no")
+ ])
+ LDFLAGS="$ac_save_ldflags"
+ CFLAGS="$ac_save_cflags"
+ LIBS="$ac_save_libs"
+ ])dnl
+
+ if test "$ac_cv_have_dpms" = no; then
+ AC_MSG_RESULT(no)
+ DPMS_LDFLAGS=""
+ DPMSINC=""
+ $2
+ else
+ AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support])
+ if test "$ac_cv_have_dpms" = "-lXdpms"; then
+ DPMS_LIB="-lXdpms"
+ fi
+ if test "$DPMS_LDFLAGS" = ""; then
+ DPMSLIB="$DPMS_LIB "'$(LIB_X11)'
+ else
+ DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)'
+ fi
+ if test "$DPMS_INCLUDE" = ""; then
+ DPMSINC=""
+ else
+ DPMSINC="-I$DPMS_INCLUDE"
+ fi
+ AC_MSG_RESULT(yes)
+ $1
+ fi
+ fi
+ AC_SUBST(DPMSINC)
+ AC_SUBST(DPMSLIB)
+])
+
+AC_DEFUN(AC_HAVE_GL,
+ [AC_REQUIRE_CPP()dnl
+ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+ test -z "$GL_LDFLAGS" && GL_LDFLAGS=
+ test -z "$GL_INCLUDE" && GL_INCLUDE=
+
+ AC_ARG_WITH(gl, [ --without-gl disable 3D GL modes],
+ gl_test=$withval, gl_test="yes")
+ if test "x$gl_test" = xno; then
+ ac_cv_have_gl=no
+ else
+ AC_MSG_CHECKING(for GL)
+ AC_CACHE_VAL(ac_cv_have_gl,
+ [
+ AC_LANG_C
+ ac_save_ldflags="$LDFLAGS"
+ ac_save_cflags="$CFLAGS"
+ LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU -lX11 -lXext -lm $LIBSOCKET"
+ CFLAGS="$CFLAGS $X_INCLUDES"
+ test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS"
+ AC_TRY_LINK([#include <GL/gl.h>
+#include <GL/glu.h>
+], [],
+ ac_cv_have_gl="mesa", ac_cv_have_gl="no")
+ if test "x$ac_cv_have_gl" = "xno"; then
+ LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGL -lGLU -lX11 -lXext -lm $LIBSOCKET"
+ CFLAGS="$ac_save_cflags $X_INCLUDES"
+ test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS"
+ AC_TRY_LINK([#include <GL/gl.h>
+#include <GL/glu.h>
+], [],
+ ac_cv_have_gl="yes", ac_cv_have_gl="no")
+ fi
+ LDFLAGS="$ac_save_ldflags"
+ CFLAGS="$ac_save_cflags"
+ ])dnl
+
+ if test "$ac_cv_have_gl" = "no"; then
+ AC_MSG_RESULT(no)
+ GL_LDFLAGS=""
+ GLINC=""
+ $2
+ else
+ AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)])
+ if test "$GL_LDFLAGS" = ""; then
+ if test "$ac_cv_have_gl" = "mesa"; then
+ GLLIB='-lMesaGL -lMesaGLU $(LIB_X11)'
+ else
+ GLLIB='-lGL -lGLU $(LIB_X11)'
+ fi
+ else
+ if test "$ac_cv_have_gl" = "mesa"; then
+ GLLIB="$GL_LDFLAGS -lMesaGL -lMesaGLU "'$(LIB_X11)'
+ else
+ GLLIB="$GL_LDFLAGS -lGL -lGLU "'$(LIB_X11)'
+ fi
+ fi
+ if test "$GL_INCLUDE" = ""; then
+ GLINC=""
+ else
+ GLINC="-I$GL_INCLUDE"
+ fi
+ AC_MSG_RESULT($ac_cv_have_gl)
+ $1
+ fi
+ fi
+ AC_SUBST(GLINC)
+ AC_SUBST(GLLIB)
+])
+
+ dnl PAM pam
+
+ dnl Should test for PAM (Pluggable Authentication Modules)
+ AC_DEFUN(AC_PATH_PAM_DIRECT,
+ [
+ test -z "$pam_direct_test_library" && pam_direct_test_library=pam
+ test -z "$pam_direct_test_include" && pam_direct_test_include=security/pam_appl.h
+
+ for ac_dir in \
+ \
+ /usr/local/include \
+ /usr/include \
+ /usr/unsupported/include \
+ /opt/include \
+ /usr/pam/include \
+ /usr/local/pam/include \
+ /usr/lib/pam/include \
+ \
+ $extra_include \
+ ; \
+ do
+ if test -r "$ac_dir/$pam_direct_test_include"; then
+ no_pam= ac_pam_includes=$ac_dir
+ break
+ fi
+ done
+
+ # First see if replacing the include by lib works.
+ for ac_dir in `echo "$ac_pam_includes" | sed s/include/lib/` \
+ \
+ /lib \
+ /usr/lib \
+ /usr/local/lib \
+ /usr/unsupported/lib \
+ /lib/security \
+ /usr/security/lib \
+ $extra_lib \
+ ; \
+ do
+ for ac_extension in a so sl; do
+ if test -r $ac_dir/lib${pam_direct_test_library}.$ac_extension; then
+ no_pam= ac_pam_libraries=$ac_dir
+ break 2
+ fi
+ done
+ done
+])
+
+AC_DEFUN(AC_PATH_PAM,
+ [
+ AC_REQUIRE([KDE_CHECK_LIBDL])
+ AC_REQUIRE_CPP()dnl
+
+dnl AC_CHECK_LIB(pam_misc, main, [PAM_MISC_LIB="-lpam_misc"
+dnl AC_DEFINE_UNQUOTED(HAVE_PAM_MISC, 1, [Define if you have a PAM implementation with the pam_misc library])], [], [-lpam $LIBDL])
+
+ AC_MSG_CHECKING(for PAM)
+ AC_ARG_WITH(pam,
+[ --with-pam[=ARG] enable support for PAM: ARG=[yes|no|service name]],
+ [
+ if test "x$withval" = "xyes"; then
+ no_pam=
+ default_pam=yes
+ elif test "x$withval" = "xno"; then
+ no_pam=yes
+ else
+ no_pam=
+ pam_service="$withval"
+ if test -z "$pam_service"; then
+ default_pam=yes
+ else
+ default_pam=
+ fi
+ fi
+ ], no_pam=yes
+ )
+
+ if test ! "$no_pam" = yes; then
+
+ AC_CACHE_VAL(ac_cv_path_pam,
+ [
+ ac_pam_includes=NONE
+ ac_pam_libraries=NONE
+ if test -z "$pam_libraries"; then
+ pam_libraries=NONE
+ fi
+ if test -z "$pam_includes"; then
+ pam_includes=NONE
+ fi
+
+ AC_PATH_PAM_DIRECT
+
+ test "x$pam_includes" = xNONE && pam_includes=$ac_pam_includes
+ test "x$pam_libraries" = xNONE && pam_libraries=$ac_pam_libraries
+
+ if test ! "x$pam_includes" = xNONE && test ! "x$pam_libraries" = xNONE; then
+ ac_pam_libs="-lpam $PAM_MISC_LIB $LIBDL"
+ ac_cv_path_pam="no_pam= ac_pam_includes=$ac_pam_includes ac_pam_libraries=$ac_pam_libraries ac_pam_libs=\"$ac_pam_libs\""
+ else
+ ac_cv_path_pam="no_pam=yes"
+ fi
+ ])
+
+ eval "$ac_cv_path_pam"
+
+ fi
+
+ if test "$no_pam" = yes; then
+ AC_MSG_RESULT(no)
+ else
+ AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules); Redhat-Users!])
+ PAMLIBS="$ac_pam_libs"
+ test "x$pam_includes" = xNONE && pam_includes=$ac_pam_includes
+ test "x$pam_libraries" = xNONE && pam_libraries=$ac_pam_libraries
+ AC_MSG_RESULT([libraries $pam_libraries, headers $pam_includes])
+ if test "$default_pam" = yes; then
+ AC_MSG_RESULT(["default pam service name will be used"])
+ else
+ AC_DEFINE_UNQUOTED(KDE_PAM_SERVICE,"$pam_service", [Define to change the default name of the PAM service used by KDE])
+ AC_MSG_RESULT(["pam service name will be: " $pam_service])
+ fi
+dnl test whether struct pam_message is const (Linux) or not (Sun)
+ pam_appl_h="$ac_pam_includes/security/pam_appl.h"
+ AC_MSG_CHECKING(for const pam_message)
+ AC_EGREP_HEADER([struct pam_message],
+ $pam_appl_h,
+ [ AC_EGREP_HEADER([const struct pam_message],
+ $pam_appl_h,
+ [AC_MSG_RESULT(["const: Linux-type PAM"]) ],
+ [AC_MSG_RESULT(["nonconst: Sun-type PAM"])
+ AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])]
+ )],
+ [AC_MSG_RESULT(["not found - assume const, Linux-type PAM"])]
+ )
+ fi
+
+ if test "x$pam_libraries" != x && test "x$pam_libraries" != xNONE ; then
+ PAMLIBPATHS="-L$pam_libraries"
+ fi
+ if test "x$pam_includes" != x && test "x$pam_includes" != xNONE ; then
+ PAMINC="-I$pam_includes"
+ fi
+
+ AC_SUBST(PAMINC)
+ AC_SUBST(PAMLIBS)
+ AC_SUBST(PAMLIBPATHS)
+
+])
+
+AC_DEFUN(KDE_CHECK_LIBDL,
+[
+AC_CHECK_LIB(dl, dlopen, [
+LIBDL="-ldl"
+ac_cv_have_dlfcn=yes
+])
+
+AC_CHECK_LIB(dld, shl_unload, [
+LIBDL="-ldld"
+ac_cv_have_shload=yes
+])
+
+AC_SUBST(LIBDL)
+])
+
+AC_DEFUN(KDE_CHECK_DLOPEN,
+[
+KDE_CHECK_LIBDL
+AC_CHECK_HEADERS(dlfcn.h dl.h)
+if test "$ac_cv_header_dlfcn_h" = "no"; then
+ ac_cv_have_dlfcn=no
+fi
+
+if test "$ac_cv_header_dl_h" = "no"; then
+ ac_cv_have_shload=no
+fi
+
+dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE
+dnl (MM)
+AC_ARG_ENABLE(dlopen,
+[ --disable-dlopen link statically [default=no]] ,
+enable_dlopen=$enableval,
+enable_dlopen=yes)
+
+# override the user's opinion, if we know it better ;)
+if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then
+ enable_dlopen=no
+fi
+
+if test "$ac_cv_have_dlfcn" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn])
+fi
+
+if test "$ac_cv_have_shload" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload])
+fi
+
+if test "$enable_dlopen" = no ; then
+ test -n "$1" && eval $1
+else
+ test -n "$2" && eval $2
+fi
+
+])
+
+AC_DEFUN(KDE_CHECK_DYNAMIC_LOADING,
+[
+KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no)
+KDE_PROG_LIBTOOL
+AC_MSG_CHECKING([dynamic loading])
+eval "`egrep '^build_libtool_libs=' libtool`"
+if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then
+ dynamic_loading=yes
+ AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING)
+else
+ dynamic_loading=no
+fi
+AC_MSG_RESULT($dynamic_loading)
+if test "$dynamic_loading" = "yes"; then
+ $1
+else
+ $2
+fi
+])
+
+AC_DEFUN(KDE_ADD_INCLUDES,
+[
+if test -z "$1"; then
+ test_include="Pix.h"
+else
+ test_include="$1"
+fi
+
+AC_MSG_CHECKING([for libg++ ($test_include)])
+
+AC_CACHE_VAL(kde_cv_libgpp_includes,
+[
+kde_cv_libgpp_includes=no
+
+ for ac_dir in \
+ \
+ /usr/include/g++ \
+ /usr/include \
+ /usr/unsupported/include \
+ /opt/include \
+ $extra_include \
+ ; \
+ do
+ if test -r "$ac_dir/$test_include"; then
+ kde_cv_libgpp_includes=$ac_dir
+ break
+ fi
+ done
+])
+
+AC_MSG_RESULT($kde_cv_libgpp_includes)
+if test "$kde_cv_libgpp_includes" != "no"; then
+ all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES"
+fi
+])
+])
+
+
+AC_DEFUN(KDE_CHECK_MICO,
+[
+AC_REQUIRE([KDE_CHECK_LIBDL])
+AC_REQUIRE([KDE_MISC_TESTS])
+AC_MSG_CHECKING(for MICO)
+
+if test -z "$MICODIR"; then
+ kde_micodir=/usr/local
+ else
+ kde_micodir="$MICODIR"
+fi
+
+AC_ARG_WITH(micodir,
+ [ --with-micodir=micodir where mico is installed ],
+ kde_micodir=$withval,
+ kde_micodir=$kde_micodir
+)
+
+AC_CACHE_VAL(kde_cv_mico_incdir,
+[
+ mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes"
+AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir)
+
+])
+kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'`
+
+if test ! -r $kde_micodir/include/CORBA.h; then
+ AC_MSG_ERROR([No CORBA.h found, specify another micodir])
+fi
+
+AC_MSG_RESULT($kde_micodir)
+
+MICO_INCLUDES=-I$kde_micodir/include
+AC_SUBST(MICO_INCLUDES)
+MICO_LDFLAGS=-L$kde_micodir/lib
+AC_SUBST(MICO_LDFLAGS)
+micodir=$kde_micodir
+AC_SUBST(micodir)
+
+AC_MSG_CHECKING([for MICO version])
+AC_CACHE_VAL(kde_cv_mico_version,
+[
+AC_LANG_C
+cat >conftest.$ac_ext <<EOF
+#include <stdio.h>
+#include <mico/version.h>
+int main() {
+
+ printf("MICO_VERSION=%s\n",MICO_VERSION);
+ return (0);
+}
+EOF
+ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest'
+if AC_TRY_EVAL(ac_compile); then
+ if eval `./conftest 2>&5`; then
+ kde_cv_mico_version=$MICO_VERSION
+ else
+ AC_MSG_ERROR([your system is not able to execute a small application to
+ find MICO version! Check $kde_micodir/include/mico/version.h])
+ fi
+else
+ AC_MSG_ERROR([your system is not able to compile a small application to
+ find MICO version! Check $kde_micodir/include/mico/version.h])
+fi
+])
+
+dnl installed MICO version
+mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
+mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
+mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
+
+if test "x$1" = "x"; then
+ req_version="2.3.0"
+else
+ req_version=$1
+fi
+
+dnl required MICO version
+req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
+req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
+req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
+
+if test "$mico_v_maj" -lt "$req_v_maj" || \
+ ( test "$mico_v_maj" -eq "$req_v_maj" && \
+ test "$mico_v_mid" -lt "$req_v_mid" ) || \
+ ( test "$mico_v_mid" -eq "$req_v_mid" && \
+ test "$mico_v_min" -lt "$req_v_min" )
+
+then
+ AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \
+at least is required. You should upgrade MICO.])
+else
+ AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)])
+fi
+
+LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL"
+AC_SUBST(LIBMICO)
+if test -z "$IDL"; then
+ IDL='$(kde_bindir)/cuteidl'
+fi
+AC_SUBST(IDL)
+IDL_DEPENDENCIES='$(kde_includes)/CUTE.h'
+AC_SUBST(IDL_DEPENDENCIES)
+
+idldir="\$(includedir)/idl"
+AC_SUBST(idldir)
+
+])
+
+AC_DEFUN(KDE_CHECK_MINI_STL,
+[
+AC_REQUIRE([KDE_CHECK_MICO])
+
+AC_MSG_CHECKING(if we use mico's mini-STL)
+AC_CACHE_VAL(kde_cv_have_mini_stl,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+kde_save_cxxflags="$CXXFLAGS"
+CXXFLAGS="$CXXFLAGS $MICO_INCLUDES"
+AC_TRY_COMPILE(
+[
+#include <mico/config.h>
+],
+[
+#ifdef HAVE_MINI_STL
+#error "nothing"
+#endif
+],
+kde_cv_have_mini_stl=no,
+kde_cv_have_mini_stl=yes)
+CXXFLAGS="$kde_save_cxxflags"
+AC_LANG_RESTORE
+])
+
+if test "x$kde_cv_have_mini_stl" = "xyes"; then
+ AC_MSG_RESULT(yes)
+ $1
+else
+ AC_MSG_RESULT(no)
+ $2
+fi
+])
+
+])
+
+
+AC_DEFUN(KDE_CHECK_LIBPTHREAD,
+[
+AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] )
+AC_SUBST(LIBPTHREAD)
+])
+
+AC_DEFUN(KDE_CHECK_PTHREAD_OPTION,
+[
+ AC_ARG_ENABLE(kernel-threads, [ --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only.],
+ kde_use_kernthreads=$enableval, kde_use_kernthreads=no)
+
+ if test "$kde_use_kernthreads" = "yes"; then
+ ac_save_CXXFLAGS="$CXXFLAGS"
+ ac_save_CFLAGS="$CXXFLAGS"
+ CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS"
+ CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS"
+ AC_CHECK_HEADERS(pthread/linuxthreads/pthread.h)
+ CXXFLAGS="$ac_save_CXXFLAGS"
+ CFLAGS="$ac_save_CFLAGS"
+ if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then
+ kde_use_kernthreads=no
+ else
+ dnl Add proper -I and -l statements
+ AC_CHECK_LIB(lthread, pthread_join, [LIBPTHREAD="-llthread -llgcc_r"]) dnl for FreeBSD
+ if test "x$LIBPTHREAD" = "x"; then
+ kde_use_kernthreads=no
+ else
+ USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads"
+ fi
+ fi
+ else
+ USE_THREADS=""
+ if test -z "$LIBPTHREAD"; then
+ KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-pthread"] )
+ fi
+ fi
+
+ case $host_os in
+ solaris*)
+ KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"])
+ CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS"
+ echo "Setting Solaris pthread compilation options"
+ ;;
+ freebsd*)
+ CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
+ echo "Setting FreeBSD pthread compilation options"
+ ;;
+ aix*)
+ CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
+ LIBPTHREAD="$LIBPTHREAD -lc_r"
+ echo "Setting AIX pthread compilation options"
+ ;;
+ linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT"
+ USE_THREADS="$USE_THREADS -DPIC -fPIC"
+ echo "Setting Linux pthread compilation options"
+ ;;
+ *)
+ ;;
+ esac
+ AC_SUBST(USE_THREADS)
+ AC_SUBST(LIBPTHREAD)
+])
+
+AC_DEFUN(KDE_CHECK_THREADING,
+[
+ AC_REQUIRE([KDE_CHECK_LIBPTHREAD])
+ AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION])
+ dnl default is yes if libpthread is found and no if no libpthread is available
+ if test -z "$LIBPTHREAD"; then
+ kde_check_threading_default=no
+ else
+ kde_check_threading_default=yes
+ fi
+ AC_ARG_ENABLE(threading, [ --disable-threading disables threading even if libpthread found ],
+ kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default)
+
+ if test "x$kde_use_threading" = "xyes"; then
+ AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)])
+ fi
+])
+
+AC_DEFUN(KDE_TRY_LINK_PYTHON,
+[
+if test "$kde_python_link_found" = no; then
+
+if test "$1" = normal; then
+ AC_MSG_CHECKING(if a Python application links)
+else
+ AC_MSG_CHECKING(if Python depends on $2)
+fi
+
+AC_CACHE_VAL(kde_cv_try_link_python_$1,
+[
+AC_LANG_SAVE
+AC_LANG_C
+kde_save_cflags="$CFLAGS"
+CFLAGS="$CFLAGS $PYTHONINC"
+kde_save_libs="$LIBS"
+LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET"
+kde_save_ldflags="$LDFLAGS"
+LDFLAGS="$LDFLAGS $PYTHONLIB"
+
+AC_TRY_LINK(
+[
+#include <Python.h>
+],[
+ PySys_SetArgv(1, 0);
+],
+ [kde_cv_try_link_python_$1=yes],
+ [kde_cv_try_link_python_$1=no]
+)
+CFLAGS="$kde_save_cflags"
+LIBS="$kde_save_libs"
+LDFLAGS="$kde_save_ldflags"
+])
+
+if test "$kde_cv_try_link_python_$1" = "yes"; then
+ AC_MSG_RESULT(yes)
+ kde_python_link_found=yes
+ if test ! "$1" = normal; then
+ LIBPYTHON="$LIBPYTHON $2"
+ fi
+ $3
+else
+ AC_MSG_RESULT(no)
+ $4
+fi
+AC_LANG_RESTORE
+
+fi
+
+])
+
+AC_DEFUN(KDE_CHECK_PYTHON,
+[
+AC_REQUIRE([KDE_CHECK_LIBDL])
+AC_REQUIRE([KDE_CHECK_LIBPTHREAD])
+
+AC_MSG_CHECKING([for Python directory])
+
+AC_CACHE_VAL(kde_cv_pythondir,
+[
+ if test -z "$PYTHONDIR"; then
+ kde_cv_pythondir=/usr/local
+ else
+ kde_cv_pythondir="$PYTHONDIR"
+ fi
+])
+
+AC_ARG_WITH(pythondir,
+[ --with-pythondir=pythondir use python installed in pythondir ],
+[
+ ac_python_dir=$withval
+], ac_python_dir=$kde_cv_pythondir
+)
+
+AC_MSG_RESULT($ac_python_dir)
+
+if test -z "$1"; then
+ version="1.5"
+else
+ version="$1"
+fi
+
+AC_MSG_CHECKING([for Python$version])
+
+python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes"
+AC_FIND_FILE(Python.h, $python_incdirs, python_incdir)
+if test ! -r $python_incdir/Python.h; then
+ AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir)
+ python_incdir=$python_incdir/python$version
+ if test ! -r $python_incdir/Python.h; then
+ AC_MSG_ERROR(Python.h not found.)
+ fi
+fi
+
+PYTHONINC=-I$python_incdir
+
+python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs"
+AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir)
+if test ! -r $python_libdir/libpython$version.a; then
+ AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir)
+ python_libdir=$python_libdir/python$version/config
+ if test ! -r $python_libdir/libpython$version.a; then
+ AC_MSG_ERROR(libpython$version.a not found.)
+ fi
+fi
+
+PYTHONLIB=-L$python_libdir
+if test -z "$LIBPYTHON"; then
+LIBPYTHON=-lpython$version
+fi
+
+python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs"
+AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir)
+python_moddir=$python_moddir/python$version
+if test ! -r $python_moddir/copy.py; then
+ AC_MSG_ERROR(python module directory not found.)
+fi
+
+PYTHONMODDIR=$python_moddir
+
+AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir)
+
+dnl Note: this test is very weak
+kde_python_link_found=no
+KDE_TRY_LINK_PYTHON(normal)
+KDE_TRY_LINK_PYTHON(m, -lm)
+KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD)
+KDE_TRY_LINK_PYTHON(tcl, -ltcl)
+KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm], [],
+ [AC_MSG_WARN([it seems, Python depends on another library.
+ Pleae use \"make LIBPTYHON='-lpython$version -lotherlib'\" to fix this
+ and contact the authors to let them know about this problem])
+ ])
+
+LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET"
+AC_SUBST(PYTHONINC)
+AC_SUBST(PYTHONLIB)
+AC_SUBST(LIBPYTHON)
+AC_SUBST(PYTHONMODDIR)
+
+])
+
+
+AC_DEFUN(KDE_CHECK_STL_SGI,
+[
+ AC_MSG_CHECKING([if STL implementation is SGI like])
+ AC_CACHE_VAL(kde_cv_stl_type_sgi,
+ [
+ AC_TRY_COMPILE([
+#include <string>
+using namespace std;
+],[
+ string astring="Hallo Welt.";
+ astring.erase(0, 6); // now astring is "Welt"
+ return 0;
+], kde_cv_stl_type_sgi=yes,
+ kde_cv_stl_type_sgi=no)
+])
+
+ AC_MSG_RESULT($kde_cv_stl_type_sgi)
+
+ if test "$kde_cv_stl_type_sgi" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI])
+ fi
+])
+
+AC_DEFUN(KDE_CHECK_STL_HP,
+[
+ AC_MSG_CHECKING([if STL implementation is HP like])
+ AC_CACHE_VAL(kde_cv_stl_type_hp,
+ [
+ AC_TRY_COMPILE([
+#include <string>
+using namespace std;
+],[
+ string astring="Hello World";
+ astring.remove(0, 6); // now astring is "World"
+ return 0;
+], kde_cv_stl_type_hp=yes,
+ kde_cv_stl_type_hp=no)
+])
+ AC_MSG_RESULT($kde_cv_stl_type_hp)
+
+ if test "$kde_cv_stl_type_hp" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_HP_STL, 1, [Define if you have a STL implementation by SGI])
+ fi
+])
+
+AC_DEFUN(KDE_CHECK_STL,
+[
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ ac_save_CXXFLAGS="$CXXFLAGS"
+ CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`"
+ KDE_CHECK_STL_SGI
+
+ if test "$kde_cv_stl_type_sgi" = "no"; then
+ KDE_CHECK_STL_HP
+
+ if test "$kde_cv_stl_type_hp" = "no"; then
+ AC_MSG_ERROR("no known STL type found")
+ fi
+ fi
+
+ CXXFLAGS="$ac_save_CXXFLAGS"
+ AC_LANG_RESTORE
+])
+
+AC_DEFUN(AC_FIND_QIMGIO,
+ [AC_REQUIRE([AC_FIND_JPEG])
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+AC_MSG_CHECKING([for qimgio])
+AC_CACHE_VAL(ac_cv_lib_qimgio,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_save_LIBS="$LIBS"
+ac_save_CXXFLAGS="$CXXFLAGS"
+LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT"
+CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
+AC_TRY_RUN(dnl
+[
+#include <qimageio.h>
+#include <qstring.h>
+int main() {
+ QString t = "hallo";
+ t.fill('t');
+ qInitImageIO();
+}
+],
+ ac_cv_lib_qimgio=yes,
+ ac_cv_lib_qimgio=no,
+ ac_cv_lib_qimgio=no)
+LIBS="$ac_save_LIBS"
+CXXFLAGS="$ac_save_CXXFLAGS"
+AC_LANG_RESTORE
+])dnl
+if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then
+ LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG"
+ AC_MSG_RESULT(yes)
+ AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available])
+ AC_SUBST(LIBQIMGIO)
+else
+ AC_MSG_RESULT(not found)
+fi
+])
+
+AC_DEFUN(KDE_CHECK_ANSI,
+[
+])
+
+AC_DEFUN(KDE_CHECK_INSURE,
+[
+ AC_ARG_ENABLE(insure, [ --enable-insure use insure++ for debugging [default=no]],
+ [
+ if test $enableval = "no"; dnl
+ then ac_use_insure="no"
+ else ac_use_insure="yes"
+ fi
+ ], [ac_use_insure="no"])
+
+ AC_MSG_CHECKING(if we will use Insure++ to debug)
+ AC_MSG_RESULT($ac_use_insure)
+ if test "$ac_use_insure" = "yes"; dnl
+ then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "????
+ fi
+])
+
+AC_DEFUN(AM_DISABLE_LIBRARIES,
+[
+ AC_PROVIDE([AM_ENABLE_STATIC])
+ AC_PROVIDE([AM_ENABLE_SHARED])
+ enable_static=no
+ enable_shared=yes
+])
+
+
+AC_DEFUN(AC_CHECK_UTMP_FILE,
+[
+ AC_MSG_CHECKING([for utmp file])
+
+ AC_CACHE_VAL(kde_cv_utmp_file,
+ [
+ kde_cv_utmp_file=no
+
+ for ac_file in \
+ \
+ /var/run/utmp \
+ /var/adm/utmp \
+ /etc/utmp \
+ ; \
+ do
+ if test -r "$ac_file"; then
+ kde_cv_utmp_file=$ac_file
+ break
+ fi
+ done
+ ])
+
+ if test "$kde_cv_utmp_file" != "no"; then
+ AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries])
+ $1
+ AC_MSG_RESULT($kde_cv_utmp_file)
+ else
+ $2
+ AC_MSG_RESULT([non found])
+ fi
+])
+
+
+AC_DEFUN(KDE_CREATE_SUBDIRSLIST,
+[
+
+DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin"
+
+if test ! -s $srcdir/subdirs; then
+ dnl Note: Makefile.common creates subdirs, so this is just a fallback
+ TOPSUBDIRS=""
+ files=`cd $srcdir && ls -1`
+ dirs=`for i in $files; do if test -d $i; then echo $i; fi; done`
+ for i in $dirs; do
+ echo $i >> $srcdir/subdirs
+ done
+fi
+
+if test -s $srcdir/inst-apps; then
+ ac_topsubdirs="`cat $srcdir/inst-apps`"
+else
+ ac_topsubdirs="`cat $srcdir/subdirs`"
+fi
+
+for i in $ac_topsubdirs; do
+ AC_MSG_CHECKING([if $i should be compiled])
+ if test -d $srcdir/$i; then
+ install_it="yes"
+ for j in $DO_NOT_COMPILE; do
+ if test $i = $j; then
+ install_it="no"
+ fi
+ done
+ else
+ install_it="no"
+ fi
+ AC_MSG_RESULT($install_it)
+ if test $install_it = "yes"; then
+ TOPSUBDIRS="$TOPSUBDIRS $i"
+ fi
+done
+
+AC_SUBST(TOPSUBDIRS)
+])
+
+AC_DEFUN(KDE_CHECK_NAMESPACES,
+[
+AC_MSG_CHECKING(whether C++ compiler supports namespaces)
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+AC_TRY_COMPILE([
+],
+[
+namespace Foo {
+ extern int i;
+ namespace Bar {
+ extern int i;
+ }
+}
+
+int Foo::i = 0;
+int Foo::Bar::i = 1;
+],[
+ AC_MSG_RESULT(yes)
+ AC_DEFINE(HAVE_NAMESPACES)
+], [
+AC_MSG_RESULT(no)
+])
+AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_CHECK_NEWLIBS,
+[
+
+])
+
+dnl ------------------------------------------------------------------------
+dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure at kde.org
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_CHECK_S_ISSOCK,
+[
+AC_MSG_CHECKING(for S_ISSOCK)
+AC_CACHE_VAL(ac_cv_have_s_issock,
+[
+AC_LANG_SAVE
+AC_LANG_C
+AC_TRY_LINK(
+[
+#include <sys/stat.h>
+],
+[
+struct stat buff;
+int b = S_ISSOCK( buff.st_mode );
+],
+ac_cv_have_s_issock=yes,
+ac_cv_have_s_issock=no)
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_have_s_issock)
+if test "$ac_cv_have_s_issock" = "yes"; then
+ AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.])
+fi
+])
+
+dnl ------------------------------------------------------------------------
+dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure at kde.org
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_CHECK_KDEMAXPATHLEN,
+[
+AC_MSG_CHECKING(for MAXPATHLEN)
+AC_CACHE_VAL(ac_cv_maxpathlen,
+[
+AC_LANG_C
+cat > conftest.$ac_ext <<EOF
+#include <stdio.h>
+#include <sys/param.h>
+#ifndef MAXPATHLEN
+#define MAXPATHLEN 1024
+#endif
+
+KDE_HELLO MAXPATHLEN
+
+EOF
+
+ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out"
+
+if AC_TRY_EVAL(ac_try) && test -s conftest.out; then
+ ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out`
+else
+ ac_cv_maxpathlen=1024
+fi
+
+rm conftest.*
+
+])
+AC_MSG_RESULT($ac_cv_maxpathlen)
+AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] )
+])
+
+dnl -------------------------------------------------------------------------
+dnl See if the compiler supports a template repository bero at redhat.de
+dnl -------------------------------------------------------------------------
+AC_DEFUN(KDE_COMPILER_REPO,
+[
+ REPO=""
+ NOREPO=""
+
+ KDE_CHECK_COMPILER_FLAG(frepo,
+ [
+ REPO="-frepo"
+ NOREPO="-fno-repo"
+ ])
+
+ if test -z "$REPO"; then
+ KDE_CHECK_COMPILER_FLAG(instances=explicit,
+ [
+ REPO="-instances=explicit"
+ NOREPO="-instances=extern"
+ ])
+ fi
+
+ if test -n "$REPO"; then
+ AC_DEFINE_UNQUOTED(HAVE_TEMPLATE_REPOSITORY, 1,
+ [C++ compiler supports template repository])
+ $1
+ fi
+
+ AC_SUBST(REPO)
+ AC_SUBST(NOREPO)
+])
+
+AC_DEFUN(KDE_CHECK_HEADER,
+[
+ AC_LANG_SAVE
+ kde_safe_cppflags=$CPPFLAGS
+ CPPFLAGS="$CPPFLAGS $all_includes"
+ AC_LANG_CPLUSPLUS
+ AC_CHECK_HEADER($1, $2, $3)
+ CPPFLAGS=$kde_safe_cppflags
+ AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_CHECK_QWSPRITEFIELD,
+[
+ KDE_CHECK_HEADER(QwSpriteField.h, ,
+ [
+ AC_MSG_WARN([you don't have QwSpriteField.h somewhere. Please install
+ QwSpriteField out of kdesupport.])
+ $1
+ ])
+])
+
+AC_DEFUN(KDE_FAST_CONFIGURE,
+[
+ dnl makes configure fast (needs perl)
+ AC_ARG_ENABLE(fast-perl, [ --disable-fast-perl disable fast Makefile generation (needs perl)],
+ with_fast_perl=$enableval, with_fast_perl=yes)
+])
+
+AC_DEFUN(KDE_CONF_FILES,
+[
+ val=
+ if test -f $srcdir/configure.files ; then
+ val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files`
+ fi
+ CONF_FILES=
+ if test -n "$val" ; then
+ for i in $val ; do
+ CONF_FILES="$CONF_FILES $i"
+ done
+ fi
+ AC_SUBST(CONF_FILES)
+])dnl
+
+AC_DEFUN(KDE_SET_PREFIX,
+[
+ unset CDPATH
+ dnl make $KDEDIR the default for the installation
+ AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde})
+
+ if test "x$prefix" = "xNONE"; then
+ prefix=$ac_default_prefix
+ ac_configure_args="$ac_configure_args --prefix $prefix"
+ fi
+ KDE_FAST_CONFIGURE
+ KDE_CONF_FILES
+])
+
+pushdef([AC_PROG_INSTALL],
+[
+ dnl our own version, testing for a -p flag
+ popdef([AC_PROG_INSTALL])
+ dnl as AC_PROG_INSTALL works as it works we first have
+ dnl to save if the user didn't specify INSTALL, as the
+ dnl autoconf one overwrites INSTALL and we have no chance to find
+ dnl out afterwards
+ test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL
+ test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM
+ test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT
+ AC_PROG_INSTALL
+
+ if test -z "$kde_save_INSTALL_given" ; then
+ # OK, user hasn't given any INSTALL, autoconf found one for us
+ # now we test, if it supports the -p flag
+ AC_MSG_CHECKING(for -p flag to install)
+ rm -f confinst.$$.* > /dev/null 2>&1
+ echo "Testtest" > confinst.$$.orig
+ ac_res=no
+ if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then
+ if test -f confinst.$$.new ; then
+ # OK, -p seems to do no harm to install
+ INSTALL="${INSTALL} -p"
+ ac_res=yes
+ fi
+ fi
+ rm -f confinst.$$.*
+ AC_MSG_RESULT($ac_res)
+ fi
+ dnl the following tries to resolve some signs and wonders coming up
+ dnl with different autoconf/automake versions
+ dnl e.g.:
+ dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s
+ dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS)
+ dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s
+ dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has
+ dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the
+ dnl install- at DIR@PROGRAMS targets to explicitly use that flag
+ dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as
+ dnl INSTALL_SCRIPT, which breaks with automake <= 1.4
+ dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure
+ dnl *sometimes KDE does not use the install- at DIR@PROGRAM targets from
+ dnl automake (due to broken Makefile.am or whatever) to install programs,
+ dnl and so does not see the -s flag in automake > 1.4
+ dnl to clean up that mess we:
+ dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG
+ dnl which cleans KDE's program with automake > 1.4;
+ dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems
+ dnl with automake<=1.4
+ dnl note that dues to this sometimes two '-s' flags are used (if KDE
+ dnl properly uses install- at DIR@PROGRAMS, but I don't care
+ dnl
+ dnl And to all this comes, that I even can't write in comments variable
+ dnl names used by automake, because it is so stupid to think I wanted to
+ dnl _use_ them, therefor I have written A_M_... instead of AM_
+ dnl hmm, I wanted to say something ... ahh yes: Arghhh.
+
+ if test -z "$kde_save_INSTALL_PROGRAM_given" ; then
+ INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)'
+ fi
+ if test -z "$kde_save_INSTALL_SCRIPT_given" ; then
+ INSTALL_SCRIPT='${INSTALL}'
+ fi
+])dnl
+
+AC_DEFUN(KDE_LANG_CPLUSPLUS,
+[AC_LANG_CPLUSPLUS
+ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC'
+pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS])
+])
+
+pushdef([AC_LANG_CPLUSPLUS],
+[popdef([AC_LANG_CPLUSPLUS])
+KDE_LANG_CPLUSPLUS
+])
+
+AC_DEFUN(KDE_CHECK_LONG_LONG,
+[
+AC_MSG_CHECKING(for long long)
+AC_CACHE_VAL(kde_cv_c_long_long,
+[
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_LINK([], [
+ long long foo = 0;
+ foo = foo+1;
+ ],
+ kde_cv_c_long_long=yes, kde_cv_c_long_long=no)
+])
+AC_MSG_RESULT($kde_cv_c_long_long)
+if test "$kde_cv_c_long_long" = yes; then
+ AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype])
+fi
+])
+
Added: kde-extras/kfocus/branches/upstream/current/admin/am_edit
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/am_edit 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/am_edit 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,1939 @@
+#!/usr/bin/perl
+
+# Expands the specilised KDE tags in Makefile.in to (hopefully) valid
+# make syntax.
+# When called without file parameters, we work recursively on all Makefile.in
+# in and below the current subdirectory. When called with file parameters,
+# only those Makefile.in are changed.
+# The currently supported tags are
+#
+# {program}_METASOURCES
+# where you have a choice of two styles
+# {program}_METASOURCES = name1.moc name2.moc ... [\]
+# {program}_METASOURCES = AUTO
+# The second style requires other tags as well.
+#
+# To install icons :
+# KDE_ICON = iconname iconname2 ...
+# KDE_ICON = AUTO
+#
+# For documentation :
+# ...
+#
+# and more new tags TBD!
+#
+# The concept (and base code) for this program came from automoc,
+# supplied by the following
+#
+# Matthias Ettrich <ettrich\@kde.org> (The originator)
+# Kalle Dalheimer <kalle\@kde.org> (The original implementator)
+# Harri Porten <porten at tu-harburg.de>
+# Alex Zepeda <garbanzo at hooked.net>
+# David Faure <faure at kde.org>
+# Stephan Kulow <coolo at kde.org>
+#
+# I've puddled around with automoc and produced something different
+# 1999-02-01 John Birch <jb.nz at writeme.com>
+# * Rewritten automoc to cater for more than just moc file expansion
+# Version 0.01 does the same as automoc at this stage.
+# 1999-02-18 jb
+# * We must always write a Makefile.in file out even if we fail
+# because we need the "perl autokmake" in the AUTOMAKE so that a
+# "make" will regenerate the Makefile.in correctly.
+# Reworked moc file checking so that missing includes in cpp
+# will work and includes in cpp when using use_automoc will also
+# work.
+# 1999-02-23 jb
+# * Added POFILE processing and changed the USE_AUTOMOC tag to
+# AUTO instead.
+# ... See ChangeLog for more logs
+
+use Cwd;
+use File::Find;
+use File::Basename;
+
+# Prototype the functions
+sub initialise ();
+sub processMakefile ($);
+sub updateMakefile ();
+sub restoreMakefile ();
+
+sub removeLine ($$);
+sub appendLines ($);
+sub substituteLine ($$);
+
+sub findMocCandidates ();
+sub pruneMocCandidates ($);
+sub checkMocCandidates ();
+sub addMocRules ();
+
+sub tag_AUTOMAKE ();
+sub tag_META_INCLUDES ();
+sub tag_METASOURCES ();
+sub tag_POFILES ();
+sub tag_DOCFILES ();
+sub tag_LOCALINSTALL();
+sub tag_IDLFILES();
+sub tag_UIFILES();
+sub tag_TOPLEVEL();
+sub tag_SUBDIRS();
+sub tag_ICON();
+sub tag_CLOSURE();
+sub tag_DIST();
+
+# Some global globals...
+$verbose = 0; # a debug flag
+$thisProg = "$0"; # This programs name
+$topdir = cwd(); # The current directory
+ at makefiles = (); # Contains all the files we'll process
+ at foreignfiles = ();
+$start = (times)[0]; # some stats for testing - comment out for release
+$version = "v0.2";
+$errorflag = 0;
+$cppExt = "*.cpp *.cc *.cxx *.C *.c++"; # used by grep
+$hExt = "*.h *.H *.hh *.hxx *.h++"; # used by grep
+$progId = "KDE tags expanded automatically by " . basename($thisProg);
+$automkCall = "\n";
+$printname = ""; # used to display the directory the Makefile is in
+$use_final = 1; # create code for --enable-final
+$cleantarget = "clean";
+$dryrun = 0;
+$pathoption = 0;
+
+while (defined ($ARGV[0]))
+{
+ $_ = shift;
+ if (/^--version$/)
+ {
+ print STDOUT "\n";
+ print STDOUT basename($thisProg), " $version\n",
+ "This is really free software, unencumbered by the GPL.\n",
+ "You can do anything you like with it except sueing me.\n",
+ "Copyright 1998 Kalle Dalheimer <kalle\@kde.org>\n",
+ "Concept, design and unnecessary questions about perl\n",
+ " by Matthias Ettrich <ettrich\@kde.org>\n\n",
+ "Making it useful by Stephan Kulow <coolo\@kde.org> and\n",
+ "Harri Porten <porten\@kde.org>\n",
+ "Updated (Feb-1999), John Birch <jb.nz\@writeme.com>\n",
+ "Current Maintainer Stephan Kulow\n\n";
+ exit 0;
+ }
+ elsif (/^--verbose$|^-v$/)
+ {
+ $verbose = 1; # Oh is there a problem...?
+ }
+ elsif (/^-p(.+)$|^--path=(.+)$/)
+ {
+ $thisProg = "$1/".basename($thisProg) if($1);
+ $thisProg = "$2/".basename($thisProg) if($2);
+ warn ("$thisProg doesn't exist\n") if (!(-f $thisProg));
+ $pathoption=1;
+ }
+ elsif (/^--help$|^-h$/)
+ {
+ print STDOUT "Usage $thisProg [OPTION] ... [dir/Makefile.in]...\n",
+ "\n",
+ "Patches dir/Makefile.in generated from automake\n",
+ "(where dir can be a full or relative directory name)",
+ "\n",
+ " -v, --verbose verbosely list files processed\n",
+ " -h, --help print this help, then exit\n",
+ " --version print version number, then exit\n",
+ " -p, --path= use the path to am_edit if the path\n",
+ " --no-final don't patch for --enable-final\n",
+ " called from is not the one to be used\n";
+
+ exit 0;
+ }
+ elsif (/^--no-final$/)
+ {
+ $use_final = 0;
+ $thisProg .= " --no-final";
+ }
+ elsif (/^-n$/)
+ {
+ $dryrun = 1;
+ }
+ else
+ {
+ # user selects what input files to check
+ # add full path if relative path is given
+ $_ = cwd()."/".$_ if (! /^\//);
+ print "User wants $_\n" if ($verbose);
+ push (@makefiles, $_);
+ }
+}
+
+if ($thisProg =~ /^\// && !$pathoption )
+{
+ print STDERR "Illegal full pathname call performed...\n",
+ "The call to \"$thisProg\"\nwould be inserted in some Makefile.in.\n",
+ "Please use option --path.\n";
+ exit 1;
+}
+
+# Only scan for files when the user hasn't entered data
+if (!@makefiles)
+{
+ print STDOUT "Scanning for Makefile.in\n" if ($verbose);
+ find (\&add_makefile, cwd());
+ #chdir('$topdir');
+} else {
+ print STDOUT "Using user enter input files\n" if ($verbose);
+}
+
+foreach $makefile (sort(@makefiles))
+{
+ processMakefile ($makefile);
+ last if ($errorflag);
+}
+
+# Just some debug statistics - comment out for release as it uses printf.
+printf STDOUT "Time %.2f CPU sec\n", (times)[0] - $start if ($verbose);
+
+exit $errorflag; # causes make to fail if erroflag is set
+
+#-----------------------------------------------------------------------------
+
+# In conjunction with the "find" call, this builds the list of input files
+sub add_makefile ()
+{
+ push (@makefiles, $File::Find::name) if (/Makefile.in$/);
+}
+
+#-----------------------------------------------------------------------------
+
+# Processes a single make file
+# The parameter contains the full path name of the Makefile.in to use
+sub processMakefile ($)
+{
+ # some useful globals for the subroutines called here
+ local ($makefile) = @_;
+ local @headerdirs = ('.');
+ local $haveAutomocTag = 0;
+ local $MakefileData = "";
+
+ local $cxxsuffix = "KKK";
+
+ local @programs = (); # lists the names of programs and libraries
+ local $program = "";
+
+ local %realObjs = (); # lists the objects compiled into $program
+ local %sources = (); # lists the sources used for $program
+ local %finalObjs = (); # lists the objects compiled when final
+ local %realname = (); # the binary name of program variable
+ local %idlfiles = (); # lists the idl files used for $program
+ local %globalmocs = ();# list of all mocfiles (in %mocFiles format)
+ local %important = (); # list of files to be generated asap
+
+ local $allidls = "";
+ local $alluis = "";
+ local $idl_output = "";# lists all idl generated files for cleantarget
+ local $ui_output = "";# lists all uic generated files for cleantarget
+ local $ui_mocs = "";# lists all moc files associated with generated uic files
+
+ local %depedmocs = ();
+
+ local $metasourceTags = 0;
+ local $dep_files = "";
+ local $dep_finals = "";
+ local %target_adds = (); # the targets to add
+ local $kdelang = "";
+ local @cleanfiles = ();
+ local $cleanMoc = "";
+ local $closure_output = "";
+
+ $makefileDir = dirname($makefile);
+ chdir ($makefileDir);
+ $printname = $makefile;
+ $printname =~ s/^\Q$topdir\E\///;
+ $makefile = basename($makefile);
+
+ print STDOUT "Processing makefile $printname\n" if ($verbose);
+
+ # Setup and see if we need to do this.
+ return if (!initialise());
+
+ tag_AUTOMAKE (); # Allows a "make" to redo the Makefile.in
+ tag_META_INCLUDES (); # Supplies directories for src locations
+
+ foreach $program (@programs) {
+ $sources_changed{$program} = 0;
+ $depedmocs{$program} = "";
+ $important{$program} = "";
+ tag_IDLFILES(); # Sorts out idl rules
+ tag_UIFILES(); # Sorts out ui rules
+ tag_CLOSURE();
+ tag_METASOURCES (); # Sorts out the moc rules
+ if ($sources_changed{$program}) {
+ my $lookup = "$program" . '_SOURCES\s*=\s*(.*)';
+ substituteLine($lookup, "$program\_SOURCES=" . $sources{$program});
+ }
+ if ($important{$program}) {
+ local %source_dict = ();
+ for $source (split(/[\034\s]+/, $sources{$program})) {
+ $source_dict{$source} = 1;
+ }
+ for $source (@cleanfiles) {
+ $source_dict{$source} = 0;
+ }
+ for $source (keys %source_dict) {
+ next if (!$source);
+ if ($source_dict{$source}) {
+ # sanity check
+ if (! -f $source) {
+ print STDERR "Error: $source is listed in a _SOURCE line in $printname, but doesn't exist yet. Put it in DISTCLEANFILES!\n";
+ } else {
+ $target_adds{"\$(srcdir)/$source"} .= $important{$program};
+ }
+ }
+ }
+ }
+ }
+ if ($cleanMoc) {
+ # Always add dist clean tag
+ # Add extra *.moc.cpp files created for USE_AUTOMOC because they
+ # aren't included in the normal *.moc clean rules.
+ appendLines ("$cleantarget-metasources:\n\t-rm -f $cleanMoc\n");
+ $target_adds{"$cleantarget-am"} .= "$cleantarget-metasources ";
+ }
+ tag_DIST();
+
+ if ($idl_output) {
+ appendLines ("$cleantarget-idl:\n\t-rm -f $idl_output\n");
+ $target_adds{"$cleantarget-am"} .= "$cleantarget-idl ";
+ }
+
+ if ($ui_output) {
+ appendLines ("$cleantarget-ui:\n\t-rm -f $ui_output\n");
+ $target_adds{"$cleantarget-am"} .= "$cleantarget-ui ";
+ }
+
+ if ($closure_output) {
+ appendLines ("$cleantarget-closures:\n\t-rm -f $closure_output\n");
+ $target_adds{"$cleantarget-am"} .= "$cleantarget-closures ";
+ }
+
+ if ($MakefileData =~ /\nKDE_LANG\s*=\s*(\S*)\s*\n/) {
+ $kdelang = '$(KDE_LANG)'
+ } else {
+ $kdelang = '';
+ }
+
+ tag_POFILES (); # language rules for po directory
+ tag_DOCFILES (); # language rules for doc directories
+ tag_TOPLEVEL (); # language rules for po toplevel
+ tag_LOCALINSTALL(); # add $(DESTDIR) before all kde_ dirs
+ tag_ICON();
+
+ my $tmp = "force-reedit:\n";
+ $tmp .= "\t$automkCall\n\tcd \$(top_srcdir) && perl $thisProg $printname\n\n";
+ appendLines($tmp);
+
+ make_meta_classes();
+ tag_FINAL() if (!$kdeopts{"nofinal"});
+
+ my $final_lines = "final:\n\t\$(MAKE) ";
+ my $nofinal_lines = "no-final:\n\t\$(MAKE) ";
+
+ foreach $program (@programs) {
+
+ my $lookup = "$program\_OBJECTS.*=[^\n]*";
+
+ my $new = "";
+
+ my @list = split(/[\034\s]+/, $realObjs{$program});
+
+ if (!$kdeopts{"nofinal"} && @list > 1 && $finalObjs{$program}) {
+
+ $new .= "$program\_final\_OBJECTS = " . $finalObjs{$program};
+ $new .= "\n$program\_nofinal\_OBJECTS = " . $realObjs{$program};
+ $new .= "\n\@KDE_USE_FINAL_FALSE\@$program\_OBJECTS = \$($program\_nofinal\_OBJECTS)";
+ $new .= "\n\@KDE_USE_FINAL_TRUE\@$program\_OBJECTS = \$($program\_final\_OBJECTS)";
+
+ $final_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" ";
+ $nofinal_lines .= "$program\_OBJECTS=\"\$($program\_nofinal\_OBJECTS)\" ";
+ } else {
+ $new = "$program\_OBJECTS = " . $realObjs{$program};
+ }
+ substituteLine ($lookup, $new);
+ }
+ appendLines($final_lines . "all-am");
+ appendLines($nofinal_lines . "all-am");
+
+ my $lookup = 'DEP_FILES\s*=([^\n]*)';
+ if ($MakefileData =~ /\n$lookup\n/) {
+ $depfiles = $1;
+
+ if ($dep_finals) {
+ $lines = "\@KDE_USE_FINAL_TRUE\@DEP_FILES = $dep_files $dep_finals \034\t$depfiles\n";
+ $lines .= "\@KDE_USE_FINAL_FALSE\@DEP_FILES = $dep_files $depfiles\n";
+ } else {
+ $lines = "DEP_FILES = $dep_files $depfiles\n";
+ }
+
+ substituteLine($lookup, $lines);
+ }
+
+ my $cvs_lines = "cvs-clean:\n";
+ $cvs_lines .= "\t\$(MAKE) -f \$(top_srcdir)/admin/Makefile.common cvs-clean\n";
+ appendLines($cvs_lines);
+
+ $cvs_lines = "kde-rpo-clean:\n";
+ $cvs_lines .= "\t-rm -f *.rpo\n";
+ appendLines($cvs_lines);
+ $target_adds{"clean"} .= "kde-rpo-clean ";
+
+ my $lines = "";
+
+ foreach $add (keys %target_adds) {
+ my $lookup = quotemeta($add) . ":\s*(.*)";
+ if ($MakefileData =~ /\n$lookup\n/) {
+ substituteLine($lookup, "$add: " . $target_adds{$add} . $1);
+ } else {
+ $lines .= "$add: " . $target_adds{$add} . "\n";
+ }
+ }
+ if ($lines) {
+ appendLines($lines);
+ }
+
+ my $found = 1;
+
+ while ($found) {
+ if ($MakefileData =~ m/\n(.*)\$\(CXXFLAGS\)(.*)\n/) {
+ my $vor = $1;
+ my $nach = $2;
+ my $lookup = quotemeta("$1\$(CXXFLAGS)$2");
+ my $replacement = "$1\$(KCXXFLAGS)$2";
+ $MakefileData =~ s/$lookup/$replacement/;
+ $lookup =~ s/\\\$\\\(CXXFLAGS\\\)/\\\$\\\(KCXXFLAGS\\\)/;
+ $replacement = "$vor\$(KCXXFLAGS) \$(KDE_CXXFLAGS)$nach";
+ substituteLine($lookup, $replacement);
+ } else {
+ $found = 0;
+ }
+ }
+
+ $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=link) (\$\(CXXLD\).*\$\(KCXXFLAGS\))';
+
+ if ($MakefileData =~ m/$lookup/ ) {
+ $MakefileData =~ s/$lookup/$1 --tag=CXX $2/;
+ }
+
+ $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=compile) (\$\(CXX\).*\$\(KCXXFLAGS\))';
+ if ($MakefileData =~ m/$lookup/ ) {
+ $MakefileData =~ s/$lookup/$1 --tag=CXX $2/;
+ }
+
+ $MakefileData =~ s/\$\(KCXXFLAGS\)/\$\(CXXFLAGS\)/g;
+
+ $lookup = '(.*)cp -pr \$\$/\$\$file \$\(distdir\)/\$\$file(.*)';
+ if ($MakefileData =~ m/$lookup/) {
+ substituteLine($lookup, "$1cp -pr \$\$d/\$\$file \$(distdir)/\$\$file$2");
+ }
+
+ # Always update the Makefile.in
+ updateMakefile ();
+ return;
+}
+
+#-----------------------------------------------------------------------------
+
+# Check to see whether we should process this make file.
+# This is where we look for tags that we need to process.
+# A small amount of initialising on the tags is also done here.
+# And of course we open and/or create the needed make files.
+sub initialise ()
+{
+ if (! -r "Makefile.am") {
+ print STDOUT "found Makefile.in without Makefile.am\n" if ($verbose);
+ return 0;
+ }
+
+ # Checking for files to process...
+ open (FILEIN, $makefile)
+ || die "Could not open $makefileDir/$makefile: $!\n";
+ # Read the file
+ while ( <FILEIN> )
+ {
+ $MakefileData .= $_;
+ if ($_ =~ /\r\n$/) {
+ die "DOS-Linefeeds within $makefileDir/$makefile!\n";
+ }
+ }
+ close FILEIN;
+
+ # Remove the line continuations, but keep them marked
+ # Note: we lose the trailing spaces but that's ok.
+ $MakefileData =~ s/\\\s*\n/\034/g;
+
+ # If we've processed the file before...
+ restoreMakefile () if ($MakefileData =~ /$progId/);
+
+ foreach $dir (@foreignfiles) {
+ if (substr($makefileDir,0,length($dir)) eq $dir) {
+ return 0;
+ }
+ }
+
+ %kdeopts = ();
+ $kdeopts{"foreign"} = 0;
+ $kdeopts{"qtonly"} = 0;
+ $kdeopts{"nofinal"} = !$use_final; # default
+
+ if ($MakefileData =~ /\nKDE_OPTIONS\s*=\s*([^\n]*)\n/) {
+ local @kde_options = split(/[\s\034]/, $1);
+ if (grep(/^foreign$/, @kde_options)) {
+ push(@foreignfiles, $makefileDir . "/");
+ return 0; # don't touch me
+ }
+ for $opt (@kde_options) {
+ if (!defined $kdeopts{$opt}) {
+ print STDERR "Warning: unknown option $opt in $printname\n";
+ } else {
+ $kdeopts{$opt} = 1;
+ }
+ }
+ }
+
+ # Look for the tags that mean we should process this file.
+ $metasourceTags = 0;
+ $metasourceTags++ while ($MakefileData =~ /\n[^=\#]*METASOURCES\s*=/g);
+
+ my $pofileTag = 0;
+ $pofileTag++ while ($MakefileData =~ /\nPOFILES\s*=/g);
+ if ($pofileTag > 1)
+ {
+ print STDERR "Error: Only one POFILES tag allowed\n";
+ $errorflag = 1;
+ }
+
+ while ($MakefileData =~ /\n\.SUFFIXES:([^\n]+)\n/g) {
+ my @list=split(' ', $1);
+ my $extions = " " . $cppExt . " ";
+ foreach $ext (@list) {
+ if ($extions =~ / \*\Q$ext\E /) {
+ $cxxsuffix = $ext;
+ $cxxsuffix =~ s/\.//g;
+ print STDOUT "will use suffix $cxxsuffix\n" if ($verbose);
+ last;
+ }
+ }
+ }
+
+ while ($MakefileData =~ /\n(\S*)_OBJECTS\s*=[ \t\034]*([^\n]*)\n/g) {
+
+ my $program = $1;
+ my $objs = $2; # safe them
+
+ my $ocv = 0;
+
+ my @objlist = split(/[\s\034]+/, $objs);
+ foreach $obj (@objlist) {
+ if ($obj =~ /\$\((\S+)\)/ ) {
+ my $variable = $1;
+ if ($variable !~ 'OBJEXT') {
+ $ocv = 1;
+ }
+ }
+ }
+
+ next if ($ocv);
+
+ $program =~ s/^am_// if ($program =~ /^am_/);
+
+ print STDOUT "found program $program\n" if ($verbose);
+ push(@programs, $program);
+
+ $realObjs{$program} = $objs;
+
+ if ($MakefileData =~ /\n$program\_SOURCES\s*=\s*(.*)\n/) {
+ $sources{$program} = $1;
+ } else {
+ $sources{$program} = "";
+ print STDERR "found program with no _SOURCES: $program\n";
+ }
+
+ my $realprogram = $program;
+ $realprogram =~ s/_/./g; # unmask to regexp
+ if ($MakefileData =~ /\n($realprogram)(\$\(EXEEXT\)?)?:.*\$\($program\_OBJECTS\)/) {
+ $realname{$program} = $1;
+ } else {
+ # not standard Makefile - nothing to worry about
+ $realname{$program} = "";
+ }
+ }
+
+ my $lookup = '\nDEPDIR\s*=.*';
+ if ($MakefileData !~ /($lookup)\n/) {
+ $lookup = '\nbindir\s*=.*';
+ if ($MakefileData =~ /($lookup)\n/) {
+ substituteLine ($lookup, "DEPDIR = .deps\n$1");
+ }
+ } else {
+ print STDERR "$printname defines DEPDIR. This means you're using automake > 1.4 - this is not supported!\n";
+ }
+
+ my @marks = ('MAINTAINERCLEANFILES', 'CLEANFILES', 'DISTCLEANFILES');
+ foreach $mark (@marks) {
+ while ($MakefileData =~ /\n($mark)\s*=\s*([^\n]*)/g) {
+ foreach $file (split('[\034\s]', $2)) {
+ $file =~ s/\.\///;
+ push(@cleanfiles, $file);
+ }
+ }
+ }
+
+ my $localTag = 0;
+ $localTag++ if ($MakefileData =~ /\ninstall-\S+-local:/);
+
+ return (!$errorflag);
+}
+
+#-----------------------------------------------------------------------------
+
+# Gets the list of user defined directories - relative to $srcdir - where
+# header files could be located.
+sub tag_META_INCLUDES ()
+{
+ my $lookup = '[^=\n]*META_INCLUDES\s*=\s*(.*)';
+ return 1 if ($MakefileData !~ /($lookup)\n/);
+ print STDOUT "META_INCLUDE processing <$1>\n" if ($verbose);
+
+ my $headerStr = $2;
+ removeLine ($lookup, $1);
+
+ $headerStr =~ tr/\034/ /;
+ my @headerlist = split(' ', $headerStr);
+
+ foreach $dir (@headerlist)
+ {
+ $dir =~ s#\$\(srcdir\)#.#;
+ if (! -d $dir)
+ {
+ print STDERR "Warning: $dir can't be found. ",
+ "Must be a relative path to \$(srcdir)\n";
+ }
+ else
+ {
+ push (@headerdirs, $dir);
+ }
+ }
+
+ return 0;
+}
+
+#-----------------------------------------------------------------------------
+
+sub tag_FINAL()
+{
+ my @final_names = ();
+
+ foreach $program (@programs) {
+
+ if ($sources{$program} =~ /\(/) {
+ print STDOUT "found ( in $program\_SOURCES. skipping\n" if ($verbose);
+ next;
+ }
+
+ my $mocsources = "";
+
+ my @progsources = split(/[\s\034]+/, $sources{$program});
+ my %sourcelist = ();
+
+ foreach $source (@progsources) {
+ my $suffix = $source;
+ $suffix =~ s/^.*\.([^\.]+)$/$1/;
+
+ if (defined($sourcelist{$suffix})) {
+ $sourcelist{$suffix} .= " " . $source;
+ } else {
+ $sourcelist{$suffix} .= $source;
+ }
+ }
+
+ foreach $suffix (keys %sourcelist) {
+
+ # See if this file contains c++ code. (ie Just check the files suffix against
+ my $suffix_is_cxx = 0;
+ foreach $cxx_suffix (split(' ', $cppExt)) {
+ $cxx_suffix =~ s/^\*\.//;
+ $cxx_suffix = quotemeta($cxx_suffix);
+ if ($suffix =~ $cxx_suffix) {
+ $suffix_is_cxx = 1;
+ last; # $cxx_suffix
+ }
+ }
+
+ my $mocfiles_in = ($suffix eq $cxxsuffix) &&
+ defined($depedmocs{$program});
+
+ my @sourcelist = split(/[\s\034]+/, $sourcelist{$suffix});
+
+ if ((@sourcelist == 1 && !$mocfiles_in) || $suffix_is_cxx != 1 ) {
+
+ # we support IDL on our own
+ if ($suffix =~ /^skel$/ || $suffix =~ /^stub/ || $suffix =~ /^h$/
+ || $suffix =~ /^ui$/ ) {
+ next;
+ }
+
+ foreach $file (@sourcelist) {
+
+ $file =~ s/\Q$suffix\E$//;
+
+ $finalObjs{$program} .= $file;
+ if ($program =~ /_la$/) {
+ $finalObjs{$program} .= "lo ";
+ } else {
+ $finalObjs{$program} .= "o ";
+ }
+ }
+ next; # suffix
+ }
+
+ my $source_deps = "";
+ foreach $source (@sourcelist) {
+ if (-f $source) {
+ $source_deps .= "\$(srcdir)/$source ";
+ } else {
+ $source_deps .= "$source ";
+ }
+ }
+
+ $handling = "$program.all_$suffix.$suffix: \$(srcdir)/Makefile.in " . $source_deps . " ";
+
+ if ($mocfiles_in) {
+ $handling .= $depedmocs{$program};
+ foreach $mocfile (split(' ', $depedmocs{$program})) {
+ if ($mocfile =~ m/\.$suffix$/) {
+ $mocsources .= " " . $mocfile;
+ }
+ }
+ }
+
+ $handling .= "\n";
+ $handling .= "\t\@echo 'creating $program.all_$suffix.$suffix ...'; \\\n";
+ $handling .= "\trm -f $program.all_$suffix.files $program.all_$suffix.final; \\\n";
+ $handling .= "\techo \"#define KDE_USE_FINAL 1\" >> $program.all_$suffix.final; \\\n";
+ $handling .= "\tfor file in " . $sourcelist{$suffix} . " $mocsources; do \\\n";
+ $handling .= "\t echo \"#include \\\"\$\$file\\\"\" >> $program.all_$suffix.files; \\\n";
+ $handling .= "\t test ! -f \$\(srcdir\)/\$\$file || egrep '^#pragma +implementation' \$\(srcdir\)/\$\$file >> $program.all_$suffix.final; \\\n";
+ $handling .= "\tdone; \\\n";
+ $handling .= "\tcat $program.all_$suffix.final $program.all_$suffix.files > $program.all_$suffix.$suffix; \\\n";
+ $handling .= "\trm -f $program.all_$suffix.final $program.all_$suffix.files\n";
+
+ appendLines($handling);
+
+ push(@final_names, "$program.all_$suffix.$suffix");
+ $finalObjs{$program} .= "$program.all_$suffix.";
+ if ($program =~ /_la$/) {
+ $finalObjs{$program} .= "lo ";
+ } else {
+ $finalObjs{$program} .= "o ";
+ }
+ }
+ }
+
+ if (!$kdeopts{"nofinal"} && @final_names >= 1) {
+ # add clean-final target
+ my $lines = "$cleantarget-final:\n";
+ $lines .= "\t-rm -f " . join(' ', @final_names) . "\n" if (@final_names);
+ appendLines($lines);
+ $target_adds{"$cleantarget-am"} .= "$cleantarget-final ";
+
+ foreach $finalfile (@final_names) {
+ $finalfile =~ s/\.[^.]*$/.P/;
+ $dep_finals .= " \$(DEPDIR)/$finalfile";
+ }
+ }
+}
+
+# Organises the list of headers that we'll use to produce moc files
+# from.
+sub tag_METASOURCES ()
+{
+ local @newObs = (); # here we add to create object files
+ local @deped = (); # here we add to create moc files
+ local $mocExt = ".moc";
+ local %mocFiles = ();
+
+ my $line = "";
+ my $postEqual = "";
+
+ my $lookup;
+ my $found = "";
+
+ if ($metasourceTags > 1) {
+ $lookup = $program . '_METASOURCES\s*=\s*(.*)';
+ return 1 if ($MakefileData !~ /\n($lookup)\n/);
+ $found = $1;
+ } else {
+ $lookup = $program . '_METASOURCES\s*=\s*(.*)';
+ if ($MakefileData !~ /\n($lookup)\n/) {
+ $lookup = 'METASOURCES\s*=\s*(.*)';
+ return 1 if ($MakefileData !~ /\n($lookup)\n/);
+ $found = $1;
+ $metasourceTags = 0; # we can use the general target only once
+ } else {
+ $found = $1;
+ }
+ }
+ print STDOUT "METASOURCE processing <$found>)\n" if ($verbose);
+
+ $postEqual = $found;
+ $postEqual =~ s/[^=]*=//;
+
+ removeLine ($lookup, $found);
+
+ # Always find the header files that could be used to "moc"
+ return 1 if (findMocCandidates ());
+
+ if ($postEqual =~ /AUTO\s*(\S*)|USE_AUTOMOC\s*(\S*)/)
+ {
+ print STDERR "$printname: the argument for AUTO|USE_AUTOMOC is obsolete" if ($+);
+ $mocExt = ".moc.$cxxsuffix";
+ $haveAutomocTag = 1;
+ }
+ else
+ {
+ # Not automoc so read the list of files supplied which
+ # should be .moc files.
+
+ $postEqual =~ tr/\034/ /;
+
+ # prune out extra headers - This also checks to make sure that
+ # the list is valid.
+ pruneMocCandidates ($postEqual);
+ }
+
+ checkMocCandidates ();
+
+ if (@newObs) {
+ my $ext = ($program =~ /_la$/) ? ".moc.lo " : ".moc.o ";
+ $realObjs{$program} .= "\034" . join ($ext, @newObs) . $ext;
+ $depedmocs{$program} = join (".moc.$cxxsuffix " , @newObs) . ".moc.$cxxsuffix";
+ foreach $file (@newObs) {
+ $dep_files .= " \$(DEPDIR)/$file.moc.P";
+ }
+ }
+ if (@deped) {
+ $depedmocs{$program} .= " ";
+ $depedmocs{$program} .= join('.moc ', @deped) . ".moc";
+ $depedmocs{$program} .= " ";
+ }
+ addMocRules ();
+ @globalmocs{keys %mocFiles}=values %mocFiles;
+}
+
+#-----------------------------------------------------------------------------
+
+# Returns 0 if the line was processed - 1 otherwise.
+# Errors are logged in the global $errorflags
+sub tag_AUTOMAKE ()
+{
+ my $lookup = '.*cd \$\(top_srcdir\)\s+&&\s+\$\(AUTOMAKE\)(.*)';
+ return 1 if ($MakefileData !~ /($lookup)/);
+ print STDOUT "AUTOMAKE processing <$1>\n" if ($verbose);
+
+ my $newLine = $1."\n\tcd \$(top_srcdir) && perl $thisProg $printname";
+ substituteLine ($lookup, $newLine);
+ $automkCall = $1;
+ return 0;
+}
+
+#-----------------------------------------------------------------------------
+
+sub tag_TOPLEVEL()
+{
+ my $lookup = 'TOPLEVEL_LANG\s*=\s*(\S+)';
+ return 1 if ($MakefileData !~ /\n$lookup\n/);
+ my $lang = $1;
+
+ if (tag_SUBDIRS()) {
+ print STDERR "Error: TOPLEVEL_LANG without SUBDIRS = \$(AUTODIRS) in $printname\n";
+ $errorflag = 1;
+ return 1;
+ }
+
+ my $pofiles = "";
+ my @restfiles = ();
+ opendir (THISDIR, ".");
+ foreach $entry (readdir(THISDIR)) {
+ next if (-d $entry);
+
+ next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry =~ /.gmo$/);
+
+ if ($entry =~ /\.po$/) {
+ $pofiles .= "$entry ";
+ next;
+ }
+ push(@restfiles, $entry);
+ }
+ closedir (THISDIR);
+
+ print STDOUT "pofiles found = $pofiles\n" if ($verbose);
+ handle_POFILES($pofiles, '$(TOPLEVEL_LANG)') if ($pofiles);
+
+ if (@restfiles) {
+ $target_adds{"install-data-am"} .= "install-nls-files ";
+ $lines = "install-nls-files:\n";
+ $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$lang\n";
+ for $file (@restfiles) {
+ $lines .= "\t\$(INSTALL_DATA) \$\(srcdir\)/$file \$(DESTDIR)\$(kde_locale)/$lang/$file\n";
+ }
+ appendLines($lines);
+ }
+
+ return 0;
+}
+
+#-----------------------------------------------------------------------------
+
+sub tag_SUBDIRS ()
+{
+ if ($MakefileData !~ /\nSUBDIRS\s*=\s*\$\(AUTODIRS\)\s*\n/) {
+ return 1;
+ }
+
+ my $subdirs;
+
+ opendir (THISDIR, ".");
+ foreach $entry (readdir(THISDIR)) {
+ next if ($entry eq "CVS" || $entry =~ /^\./);
+ if (-d $entry && -f $entry . "/Makefile.am") {
+ $subdirs .= " $entry";
+ next;
+ }
+ }
+ closedir (THISDIR);
+
+ my $lines = "SUBDIRS =$subdirs\n";
+ substituteLine('SUBDIRS\s*=.*', $lines);
+ return 0;
+}
+
+sub tag_IDLFILES ()
+{
+ my @psources = split(/[\034\s]+/, $sources{$program});
+ my $dep_lines = "";
+ my @cppFiles = ();
+
+ foreach $source (@psources) {
+
+ my $skel = ($source =~ m/\.skel$/);
+
+ if ($source =~ m/\.stub$/ || $skel) {
+
+ my $qs = quotemeta($source);
+ $sources{$program} =~ s/$qs//;
+ $sources_changed{$program} = 1;
+
+ print STDOUT "adding IDL file $source\n" if ($verbose);
+
+ $source =~ s/\.(stub|skel)$//;
+
+ my $sourcename;
+
+ if ($skel) {
+ $sourcename = "$source\_skel";
+ } else {
+ $sourcename = "$source\_stub";
+ }
+
+ my $sourcedir = '';
+ if (-f "$makefileDir/$source.h") {
+ $sourcedir = '$(srcdir)/';
+ } else {
+ if ($MakefileData =~ /\n$source\_DIR\s*=\s*(\S+)\n/) {
+ $sourcedir = $1;
+ $sourcedir .= "/" if ($sourcedir !~ /\/$/);
+ }
+ }
+
+ if ($allidls !~ /$source\_kidl/) {
+
+ $dep_lines .= "$source.kidl: $sourcedir$source.h \$(DCOPIDL_DEPENDENCIES)\n";
+ $dep_lines .= "\t\$(DCOPIDL) $sourcedir$source.h > $source.kidl || ( rm -f $source.kidl ; /bin/false )\n";
+
+ $allidls .= $source . "_kidl ";
+ }
+
+ if ($allidls !~ /$sourcename/) {
+
+ if ($skel) {
+ $dep_lines .= "$sourcename.$cxxsuffix: $source.kidl\n";
+ $dep_lines .= "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-stub $source.kidl\n";
+ } else {
+ $target_adds{"$sourcename.$cxxsuffix"} .= "$sourcename.h ";
+ $dep_lines .= "$sourcename.h: $source.kidl\n";
+ $dep_lines .= "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-skel $source.kidl\n";
+ }
+
+ $allidls .= $sourcename . " ";
+ }
+
+ $idlfiles{$program} .= $sourcename . " ";
+
+ if ($program =~ /_la$/) {
+ $realObjs{$program} .= " $sourcename.lo";
+ } else {
+ $realObjs{$program} .= " $sourcename.\$(OBJEXT)";
+ }
+ $sources{$program} .= " $sourcename.$cxxsuffix";
+ $sources_changed{$program} = 1;
+ $important{$program} .= "$sourcename.h " if (!$skel);
+ $idl_output .= "\\\n\t$sourcename.$cxxsuffix $sourcename.h $source.kidl ";
+ push(@cleanfiles, "$sourcename.$cxxsuffix");
+ push(@cleanfiles, "$sourcename.h");
+ push(@cleanfiles, "$sourcename.kidl");
+ $dep_files .= " \$(DEPDIR)/$sourcename.P";
+ }
+ }
+ if ($dep_lines) {
+ appendLines($dep_lines);
+ }
+
+ if (0) {
+ my $lookup = "($program)";
+ $lookup .= '(|\$\(EXEEXT\))';
+ $lookup =~ s/\_/./g;
+ $lookup .= ":(.*..$program\_OBJECTS..*)";
+ # $lookup = quotemeta($lookup);
+ if ($MakefileData =~ /\n$lookup\n/) {
+
+ my $line = "$1$2: ";
+ foreach $file (split(' ', $idlfiles{$program})) {
+ $line .= "$file.$cxxsuffix ";
+ }
+ $line .= $3;
+ substituteLine($lookup, $line);
+ } else {
+ print STDERR "no built dependency found $lookup\n";
+ }
+ }
+}
+
+sub tag_UIFILES ()
+{
+ my @psources = split(/[\034\s]+/, $sources{$program});
+ my $dep_lines = "";
+ my @depFiles = ();
+
+ foreach $source (@psources) {
+
+ if ($source =~ m/\.ui$/) {
+
+ print STDERR "adding UI file $source\n" if ($verbose);
+
+ my $qs = quotemeta($source);
+ $sources{$program} =~ s/$qs//;
+ $sources_changed{$program} = 1;
+
+ $source =~ s/\.ui$//;
+
+ my $sourcedir = '';
+ if (-f "$makefileDir/$source.ui") {
+ $sourcedir = '$(srcdir)/';
+ }
+
+ if ($alluis !~ /$source/) {
+
+ $dep_lines .= "$source.$cxxsuffix: $sourcedir$source.ui $source.h $source.moc\n";
+ $dep_lines .= "\trm -f $source.$cxxsuffix\n";
+ if (!$kdeopts{"qtonly"}) {
+ $dep_lines .= "\techo '#include <klocale.h>' > $source.$cxxsuffix\n";
+ $dep_lines .= "\t\$(UIC) -tr i18n -i $source.h $sourcedir$source.ui | sed -e \"s,i18n( \\\"\\\" ),QString::null,g\" >> $source.$cxxsuffix || rm -f $source.$cxxsuffix\n";
+ } else {
+ $dep_lines .= "\t\$(UIC) -i $source.h $sourcedir$source.ui > $source.$cxxsuffix || rm -f $source.$cxxsuffix\n";
+ }
+ $dep_lines .= "\techo '#include \"$source.moc\"' >> $source.$cxxsuffix\n\n";
+ $dep_lines .= "$source.h: $sourcedir$source.ui\n";
+ $dep_lines .= "\t\$(UIC) -o $source.h $sourcedir$source.ui\n\n";
+ $dep_lines .= "$source.moc: $source.h\n";
+ $dep_lines .= "\t\$(MOC) $source.h -o $source.moc\n";
+
+ $alluis .= "$source ";
+ $ui_mocs .= " $source.moc";
+ $depedmocs{$program} .= " $source.moc";
+ }
+
+ if ($program =~ /_la$/) {
+ $realObjs{$program} .= " $source.lo";
+ } else {
+ $realObjs{$program} .= " $source.\$(OBJEXT)";
+ }
+ $sources{$program} .= " $source.$cxxsuffix";
+ $sources_changed{$program} = 1;
+ $important{$program} .= "$source.h ";
+ $ui_output .= "\\\n\t$source.$cxxsuffix $source.h $source.moc ";
+ push(@cleanfiles, "$source.$cxxsuffix");
+ push(@cleanfiles, "source.h");
+ push(@cleanfiles, "$source.moc");
+
+ $dep_files .= " \$(DEPDIR)/$source.P";
+ }
+ }
+ if ($dep_lines) {
+ appendLines($dep_lines);
+ }
+}
+
+sub tag_ICON()
+{
+ my $lookup = '([^\s]*)_ICON\s*=\s*([^\n]*)';
+ my $install = "";
+ my $uninstall = "";
+
+ while ($MakefileData =~ /\n$lookup/g) {
+ my $destdir;
+ if ($1 eq "KDE") {
+ $destdir = "kde_icondir";
+ } else {
+ $destdir = $1 . "dir";
+ }
+ my $iconauto = ($2 =~ /AUTO\s*$/);
+ my @appnames = ();
+ if ( ! $iconauto ) {
+ my @_appnames = split(" ", $2);
+ print STDOUT "KDE_ICON processing <@_appnames>\n" if ($verbose);
+ foreach $appname (@_appnames) {
+ push(@appnames, quotemeta($appname));
+ }
+ } else {
+ print STDOUT "KDE_ICON processing <AUTO>\n" if ($verbose);
+ }
+
+ my @files = ();
+ opendir (THISDIR, ".");
+ foreach $entry (readdir(THISDIR)) {
+ next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/);
+ next if (! -f $entry);
+ if ( $iconauto )
+ {
+ push(@files, $entry)
+ if ($entry =~ /\.xpm/ || $entry =~ /\.png/);
+ } else {
+ foreach $appname (@appnames) {
+ push(@files, $entry)
+ if ($entry =~ /-$appname\.xpm/ || $entry =~ /-$appname\.png/);
+ }
+ }
+ }
+ closedir (THISDIR);
+
+ my %directories = ();
+
+ foreach $file (@files) {
+ my $newfile = $file;
+ my $prefix = $file;
+ $prefix =~ s/\.(png|xpm)$//;
+ my $appname = $prefix;
+ $appname =~ s/^[^-]+-// if ($appname =~ /-/) ;
+ $appname =~ s/^[^-]+-// if ($appname =~ /-/) ;
+ $appname = quotemeta($appname);
+ $prefix =~ s/$appname$//;
+ $prefix =~ s/-$//;
+
+ $prefix = 'lo16-app' if ($prefix eq 'mini');
+ $prefix = 'lo32-app' if ($prefix eq 'lo');
+ $prefix = 'hi48-app' if ($prefix eq 'large');
+ $prefix .= '-app' if ($prefix =~ m/^...$/);
+
+ my $type = $prefix;
+ $type =~ s/^.*-([^-]+)$/$1/;
+ $prefix =~ s/^(.*)-[^-]+$/$1/;
+
+ my %type_hash =
+ (
+ 'action' => 'actions',
+ 'app' => 'apps',
+ 'device' => 'devices',
+ 'filesys' => 'filesystems',
+ 'mime' => 'mimetypes'
+ );
+
+ if (! defined $type_hash{$type} ) {
+ print STDERR "unknown icon type $type in $printname ($file)\n";
+ next;
+ }
+
+ my %dir_hash =
+ (
+ 'los' => 'locolor/16x16',
+ 'lom' => 'locolor/32x32',
+ 'him' => 'hicolor/32x32',
+ 'hil' => 'hicolor/48x48',
+ 'lo16' => 'locolor/16x16',
+ 'lo22' => 'locolor/22x22',
+ 'lo32' => 'locolor/32x32',
+ 'hi16' => 'hicolor/16x16',
+ 'hi22' => 'hicolor/22x22',
+ 'hi32' => 'hicolor/32x32',
+ 'hi48' => 'hicolor/48x48',
+ 'hisc' => 'hicolor/scalable'
+ );
+
+ $newfile =~ s at .*-($appname\.(png|xpm?))@$1@;
+
+ if (! defined $dir_hash{$prefix}) {
+ print STDERR "unknown icon prefix $prefix in $printname\n";
+ next;
+ }
+
+ my $dir = $dir_hash{$prefix} . "/" . $type_hash{$type};
+ if ($newfile =~ /-[^\.]/) {
+ my $tmp = $newfile;
+ $tmp =~ s/^([^-]+)-.*$/$1/;
+ $dir = $dir . "/" . $tmp;
+ $newfile =~ s/^[^-]+-//;
+ }
+
+ if (!defined $directories{$dir}) {
+ $install .= "\t\$(mkinstalldirs) \$(DESTDIR)\$($destdir)/$dir\n";
+ $directories{$dir} = 1;
+ }
+
+ $install .= "\t\$(INSTALL_DATA) \$(srcdir)/$file \$(DESTDIR)\$($destdir)/$dir/$newfile\n";
+ $uninstall .= "\t-rm -f \$(DESTDIR)\$($destdir)/$dir/$newfile\n";
+
+ }
+ }
+
+ if (length($install)) {
+ $target_adds{"install-data-am"} .= "install-kde-icons ";
+ $target_adds{"uninstall-am"} .= "uninstall-kde-icons ";
+ appendLines("install-kde-icons:\n" . $install . "\nuninstall-kde-icons:\n" . $uninstall);
+ }
+}
+
+sub handle_POFILES($$)
+{
+ my @pofiles = split(" ", $_[0]);
+ my $lang = $_[1];
+
+ # Build rules for creating the gmo files
+ my $tmp = "";
+ my $allgmofiles = "";
+ my $pofileLine = "POFILES =";
+ foreach $pofile (@pofiles)
+ {
+ $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension
+ $tmp .= "$1.gmo: $pofile\n";
+ $tmp .= "\trm -f $1.gmo; \$(GMSGFMT) -o $1.gmo \$(srcdir)/$pofile\n";
+ $tmp .= "\ttest ! -f $1.gmo || touch $1.gmo\n";
+ $allgmofiles .= " $1.gmo";
+ $pofileLine .= " $1.po";
+ }
+ appendLines ($tmp);
+ my $lookup = 'POFILES\s*=([^\n]*)';
+ if ($MakefileData !~ /\n$lookup/) {
+ appendLines("$pofileLine\nGMOFILES =$allgmofiles");
+ } else {
+ substituteLine ($lookup, "$pofileLine\nGMOFILES =$allgmofiles");
+ }
+
+ if ($allgmofiles) {
+
+ # Add the "clean" rule so that the maintainer-clean does something
+ appendLines ("clean-nls:\n\t-rm -f $allgmofiles\n");
+
+ $target_adds{"maintainer-clean"} .= "clean-nls ";
+
+ $lookup = 'DISTFILES\s*=\s*(.*)';
+ if ($MakefileData =~ /\n$lookup\n/) {
+ $tmp = "DISTFILES = \$(GMOFILES) \$(POFILES) $1";
+ substituteLine ($lookup, $tmp);
+ }
+ }
+
+ $target_adds{"install-data-am"} .= "install-nls ";
+
+ $tmp = "install-nls:\n";
+ $tmp .= "install-nls:\n";
+ if ($lang) {
+ $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES\n";
+ }
+ $tmp .= "\t\@for base in ";
+ foreach $pofile (@pofiles)
+ {
+ $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension
+ $tmp .= "$1 ";
+ }
+
+ $tmp .= "; do \\\n";
+ if ($lang) {
+ $tmp .= "\t echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n";
+ $tmp .= "\t test ! -f \$\$base.gmo || \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"
+ } else {
+ $tmp .= "\t echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n";
+ $tmp .= "\t \$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES ; \\\n";
+ $tmp .= "\t test ! -f \$\$base.gmo || \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n";
+ }
+ $tmp .= "\tdone\n\n";
+ appendLines ($tmp);
+
+ $target_adds{"uninstall"} .= "uninstall-nls ";
+
+ $tmp = "uninstall-nls:\n";
+ foreach $pofile (@pofiles)
+ {
+ $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension
+ if ($lang) {
+ $tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/$1.mo\n";
+ } else {
+ $tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$1/LC_MESSAGES/\$(PACKAGE).mo\n";
+ }
+ }
+ appendLines($tmp);
+
+ $target_adds{"all"} .= "all-nls ";
+
+ $tmp = "all-nls: \$(GMOFILES)\n";
+
+ appendLines($tmp);
+
+ $target_adds{"distdir"} .= "distdir-nls ";
+
+ $tmp = "distdir-nls:\$(GMOFILES)\n";
+ $tmp .= "\tfor file in \$(POFILES); do \\\n";
+ $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n";
+ $tmp .= "\tdone\n";
+ $tmp .= "\ttest -z \"\$(GMOFILES)\" || cp \$(GMOFILES) \$(distdir)\n";
+
+ appendLines ($tmp);
+
+ if (!$lang) {
+ appendLines("merge:\n\t\$(MAKE) -f \$(top_srcdir)/admin/Makefile.common package-merge POFILES=\"\${POFILES}\" PACKAGE=\${PACKAGE}\n\n");
+ }
+
+}
+
+#-----------------------------------------------------------------------------
+
+# Returns 0 if the line was processed - 1 otherwise.
+# Errors are logged in the global $errorflags
+sub tag_POFILES ()
+{
+ my $lookup = 'POFILES\s*=([^\n]*)';
+ return 1 if ($MakefileData !~ /\n$lookup/);
+ print STDOUT "POFILES processing <$1>\n" if ($verbose);
+
+ my $tmp = $1;
+
+ # make sure these are all gone.
+ if ($MakefileData =~ /\n\.po\.gmo:\n/)
+ {
+ print STDERR "Warning: Found old .po.gmo rules in $printname. New po rules not added\n";
+ return 1;
+ }
+
+ # Either find the pofiles in the directory (AUTO) or use
+ # only the specified po files.
+ my $pofiles = "";
+ if ($tmp =~ /^\s*AUTO\s*$/)
+ {
+ opendir (THISDIR, ".");
+ next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^#.*#$/);
+ $pofiles = join(" ", grep(/\.po$/, readdir(THISDIR)));
+ closedir (THISDIR);
+ print STDOUT "pofiles found = $pofiles\n" if ($verbose);
+ }
+ else
+ {
+ $tmp =~ s/\034/ /g;
+ $pofiles = $tmp;
+ }
+ return 1 if (!$pofiles); # Nothing to do
+
+ handle_POFILES($pofiles, $kdelang);
+
+ return 0;
+}
+
+sub helper_LOCALINSTALL($)
+{
+ my $lookup = "\n" . $_[0] . ":";
+ if ($MakefileData =~ /($lookup)/) {
+
+ my $install = $MakefileData;
+ $install =~ s/\n/\035/g;
+ $install =~ s/.*\035$_[0]:[^\035]*\035//;
+ my $emptyline = 0;
+ while (! $emptyline) {
+ if ($install =~ /([^\035]*)\035(.*)/) {
+ local $line = $1;
+ $install = $2;
+ if ($line !~ /^\s*$/ && $line !~ /^(\@.*\@)*\t/) {
+ $emptyline = 1;
+ } else {
+ replaceDestDir($line);
+ }
+ } else {
+ $emptyline = 1;
+ }
+ }
+ }
+
+}
+
+sub tag_LOCALINSTALL ()
+{
+ helper_LOCALINSTALL('install-exec-local');
+ helper_LOCALINSTALL('install-data-local');
+ helper_LOCALINSTALL('uninstall-local');
+
+ return 0;
+}
+
+sub replaceDestDir($) {
+ local $line = $_[0];
+
+ if ( $line =~ /^\s*(\@.*\@)*\s*\$\(mkinstalldirs\)/
+ || $line =~ /^\s*(\@.*\@)*\s*\$\(INSTALL\S*\)/
+ || $line =~ /^\s*(\@.*\@)*\s*(-?rm.*) \S*$/)
+ {
+ $line =~ s/^(.*) ([^\s]*)\s*$/$1 \$(DESTDIR)$2/ if ($line !~ /\$\(DESTDIR\)/);
+ }
+
+ if ($line ne $_[0]) {
+ $_[0] = quotemeta $_[0];
+ substituteLine($_[0], $line);
+ }
+}
+
+#---------------------------------------------------------------------------
+sub tag_CLOSURE () {
+ return if ($program !~ /_la$/);
+
+ my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n";
+ $MakefileData =~ m/$lookup/;
+ return if ($1 !~ /CXXLINK/);
+
+ if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ &&
+ $MakefileData !~ /\n$program\_LDFLAGS\s*=.*KDE_PLUGIN/ ) {
+ print STDERR "Report: $program contains undefined in $printname\n" if ($program =~ /^lib/ && $dryrun);
+ return;
+ }
+ my $closure = $realname{$program} . ".closure";
+ my $lines = "$closure: \$($program\_OBJECTS) \$($program\_DEPENDENCIES)\n";
+ $lines .= "\t\@echo \"int main() {return 0;}\" > $program\_closure.$cxxsuffix\n";
+ $lines .= "\t\@\$\(LTCXXCOMPILE\) -c $program\_closure.$cxxsuffix\n";
+ $lines .= "\t\@\$\(CXXLINK\) $program\_closure.lo \$($program\_LDFLAGS) \$($program\_OBJECTS) \$($program\_LIBADD) \$(LIBS)\n";
+ $lines .= "\t\@rm -f $program\_closure.* $closure\n";
+ $lines .= "\t\@echo \"timestamp\" > $closure\n";
+ $lines .= "\n";
+ appendLines($lines);
+ $lookup = $realname{$program} . ": (.*)";
+ if ($MakefileData =~ /\n$lookup\n/) {
+ $lines = "\@KDE_USE_CLOSURE_TRUE@". $realname{$program} . ": $closure $1";
+ $lines .= "\n\@KDE_USE_CLOSURE_FALSE@" . $realname{$program} . ": $1";
+ substituteLine($lookup, $lines);
+ }
+ $closure_output .= " $closure";
+}
+
+sub tag_DIST () {
+ my %foundfiles = ();
+ opendir (THISDIR, ".");
+ foreach $entry (readdir(THISDIR)) {
+ next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile$$/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/);
+ next if (! -f $entry);
+ next if ($entry =~ /\.moc/ || $entry =~ /\.lo$/ || $entry =~ /\.la$/ || $entry =~ /\.o/);
+ $foundfiles{$entry} = 1;
+ }
+ closedir (THISDIR);
+
+ my @marks = ("EXTRA_DIST", "DIST_COMMON", '\S*_SOURCES', '\S*_HEADERS', 'MAINTAINERCLEANFILES', 'CLEANFILES', 'DISTCLEANFILES', '\S*_OBJECTS');
+ foreach $mark (@marks) {
+ while ($MakefileData =~ /\n($mark)\s*=\s*([^\n]*)/g) {
+ foreach $file (split('[\034\s]', $2)) {
+ $file =~ s/\.\///;
+ $foundfiles{$file} = 0 if (defined $foundfiles{$file});
+ }
+ }
+ }
+ my @files = ("Makefile", "config.cache", "config.log", "stamp-h",
+ "stamp-h1", "stamp-h1", "config.h", "Makefile", "config.status", "config.h", "libtool");
+ foreach $file (@files) {
+ $foundfiles{$file} = 0 if (defined $foundfiles{$file});
+ }
+
+ my $KDE_DIST = "";
+ foreach $file (keys %foundfiles) {
+ if ($foundfiles{$file} == 1) {
+ $KDE_DIST .= "$file ";
+ }
+ }
+ if ($KDE_DIST) {
+ print "KDE_DIST $printname $KDE_DIST\n" if ($verbose);
+
+ my $lookup = "DISTFILES *=(.*)";
+ if ($MakefileData =~ /\n$lookup\n/) {
+ substituteLine($lookup, "KDE_DIST=$KDE_DIST\n\nDISTFILES=$1 \$(KDE_DIST)\n");
+ }
+ }
+}
+
+#-----------------------------------------------------------------------------
+# Returns 0 if the line was processed - 1 otherwise.
+# Errors are logged in the global $errorflags
+sub tag_DOCFILES ()
+{
+# if ($MakefileData =~ /\nSUBDIRS\s*=/) { # subdirs
+# $MakefileData =~ /\n(.*-recursive:\s*)\n/;
+# my $orig_rules = $1;
+# my $rules = $orig_rules;
+# $rules =~ s/:\s*$//;
+# substituteLine($orig_rules, "$rules docs-recursive:");
+# appendLines("docs: docs-recursive docs-am\n");
+# } else {
+# appendLines("docs: docs-am\n");
+# }
+ $target_adds{"all"} .= "docs-am ";
+
+ my $lookup = 'KDE_DOCS\s*=\s*([^\n]*)';
+ goto nodocs if ($MakefileData !~ /\n$lookup/);
+ print STDOUT "KDE_DOCS processing <$1>\n" if ($verbose);
+
+ tag_SUBDIRS();
+
+ my $tmp = $1;
+
+ # Either find the files in the directory (AUTO) or use
+ # only the specified po files.
+ my $files = "";
+ my $appname = $tmp;
+ $appname =~ s/^(\S*)\s*.*$/$1/;
+ if ($appname =~ /AUTO/) {
+ $appname = basename($makefileDir);
+ if ("$appname" eq "en") {
+ print STDERR "Error: KDE_DOCS = AUTO relies on the directory name. Yours is 'en' - you most likely want something else, e.g. KDE_DOCS = myapp\n";
+ exit(1);
+ }
+ }
+
+ if ($tmp !~ / - /)
+ {
+ opendir (THISDIR, ".");
+ foreach $entry (readdir(THISDIR)) {
+ next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/);
+ next if (! -f $entry);
+ $files .= "$entry ";
+ }
+ closedir (THISDIR);
+ print STDOUT "docfiles found = $files\n" if ($verbose);
+ }
+ else
+ {
+ $tmp =~ s/\034/ /g;
+ $tmp =~ s/^\S*\s*-\s*//;
+ $files = $tmp;
+ }
+ goto nodocs if (!$files); # Nothing to do
+
+ if ($files =~ /(^| )index\.docbook($| )/) {
+
+ my $lines = "";
+ my $lookup = 'KDB2HTML\s*=';
+ #if ($MakefileData !~ /\n($lookup)/) {
+# $lines = "KDB2HTML = \$(SHELL) /\$(kde_bindir)/kdb2html\n";
+# }
+ $lines .= "docs-am: HTML HTML/index.html\n";
+ $lines .= "\n";
+ $lines .= "HTML:\n";
+ $lines .= "\ttest -d HTML || mkdir HTML\n";
+ $lines .= "\n";
+ $lines .= "HTML/index.html: HTML index.docbook\n";
+ $lines .= "\t\@test -d HTML && rm -r HTML\n";
+ $lines .= "\t\$(KDB2HTML) \$(srcdir)/index.docbook\n";
+ $lines .= "\n";
+ $lines .= "install-docs:\n";
+ $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n";
+ $lines .= "\t-\@filelist=\"\" ;\\\n";
+ $lines .= "\tif test -d HTML; then \\\n";
+ $lines .= "\t filelist=`(cd HTML && ls -1 * .anchors 2> /dev/null)`; \\\n";
+ $lines .= "\t dir=HTML; \\\n";
+ $lines .= "\telse if test -d \$(srcdir)/HTML; then \\\n";
+ $lines .= "\t filelist=`(cd \$(srcdir)/HTML && ls -1 * .anchors 2> /dev/null)`; \\\n";
+ $lines .= "\t dir=\"\$(srcdir)/HTML\" ;\\\n";
+ $lines .= "\tfi ; fi ;\\\n";
+ $lines .= "\tfor file in \$\$filelist; do if test -f \$\$dir/\$\$file; then \\\n";
+ $lines .= "\techo \$(INSTALL_DATA) \$\$dir/\$\$file \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$file ;\\\n";
+ $lines .= "\t\$(INSTALL_DATA) \$\$dir/\$\$file \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$file; \\\n";
+ $lines .= "\tfi; done\n";
+ $lines .= "\t-rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n";
+ $lines .= "\t\$(LN_S) \$(kde_libs_htmldir)/$kdelang/common \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n";
+
+ $lines .= "\n";
+ $lines .= "uninstall-docs:\n";
+ $lines .= "\t-rm -rf \$(kde_htmldir)/$kdelang/$appname\n";
+ $lines .= "\n";
+ $target_adds{"install-data-am"} .= "install-docs ";
+ $target_adds{"uninstall"} .= "uninstall-docs ";
+ appendLines ($lines);
+ } else {
+ appendLines("docs-am:\n");
+ }
+
+ $target_adds{"install-data-am"} .= "install-nls";
+ $target_adds{"uninstall"} .= "uninstall-nls ";
+
+ $tmp = "install-nls:\n";
+ $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n";
+ $tmp .= "\t\@for base in $files; do \\\n";
+ $tmp .= "\t echo \$(INSTALL_DATA) \$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n";
+ $tmp .= "\t \$(INSTALL_DATA) \$(srcdir)/\$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n";
+ $tmp .= "\tdone\n";
+ if ($appname eq 'common') {
+ $tmp .= "\t\@echo \"merging common and language specific dir\" ;\\\n";
+ $tmp .= "\tif test ! -e \$(kde_htmldir)/en/common/kde-common.css; then echo 'no english docs found in \$(kde_htmldir)/en/common/'; exit 1; fi \n";
+ $tmp .= "\t\@com_files=`cd \$(kde_htmldir)/en/common && echo *` ;\\\n";
+ $tmp .= "\tcd \$(DESTDIR)\$(kde_htmldir)/$kdelang/common ;\\\n";
+ $tmp .= "\tif test -n \"\$\$com_files\"; then for p in \$\$com_files ; do \\\n";
+ $tmp .= "\t case \" $files \" in \\\n";
+ $tmp .= "\t *\" \$\$p \"*) ;; \\\n";
+ $tmp .= "\t *) test ! -e \$\$p && echo \$(LN_S) ../../en/common/\$\$p \$(DESTDIR)\$(kde_htmldir)/$kdelang/common/\$\$p && \$(LN_S) ../../en/common/\$\$p \$\$p ;; \\\n";
+ $tmp .= "\t esac ; \\\n";
+ $tmp .= "\tdone ; fi ; true\n";
+ }
+ $tmp .= "\n";
+ $tmp .= "uninstall-nls:\n";
+ $tmp .= "\tfor base in $files; do \\\n";
+ $tmp .= "\t rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n";
+ $tmp .= "\tdone\n\n";
+ appendLines ($tmp);
+
+ $target_adds{"distdir"} .= "distdir-nls ";
+
+ $tmp = "distdir-nls:\n";
+ $tmp .= "\tfor file in $files; do \\\n";
+ $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n";
+ $tmp .= "\tdone\n";
+
+ appendLines ($tmp);
+
+ return 0;
+
+ nodocs:
+ appendLines("docs-am:\n");
+ return 1;
+}
+
+#-----------------------------------------------------------------------------
+# Find headers in any of the source directories specified previously, that
+# are candidates for "moc-ing".
+sub findMocCandidates ()
+{
+ my @list = ();
+ foreach $dir (@headerdirs)
+ {
+ chdir ($dir);
+ @list = `grep -l '^.*Q_OBJECT' $hExt 2> /dev/null`;
+ chdir ($makefileDir);
+
+ # The assoc array of root of headerfile and header filename
+ foreach $hFile (@list)
+ {
+ chomp ($hFile);
+ $hFile =~ /(.*)\.[^\.]*$/; # Find name minus extension
+ if ($mocFiles{$1})
+ {
+ print STDERR "Warning: Multiple header files found for $1\n";
+ next; # Use the first one
+ }
+ $mocFiles{$1} = "$dir\035$hFile"; # Add relative dir
+ }
+ }
+
+ return 0;
+}
+
+#-----------------------------------------------------------------------------
+
+# The programmer has specified a moc list. Prune out the moc candidates
+# list that we found based on looking at the header files. This generates
+# a warning if the programmer gets the list wrong, but this doesn't have
+# to be fatal here.
+sub pruneMocCandidates ($)
+{
+ my %prunedMoc = ();
+ local @mocList = split(' ', $_[0]);
+
+ foreach $mocname (@mocList)
+ {
+ $mocname =~ s/\.moc$//;
+ if ($mocFiles{$mocname})
+ {
+ $prunedMoc{$mocname} = $mocFiles{$mocname};
+ }
+ else
+ {
+ my $print = $makefileDir;
+ $print =~ s/^\Q$topdir\E\\//;
+ # They specified a moc file but we can't find a header that
+ # will generate this moc file. That's possible fatal!
+ print STDERR "Warning: No moc-able header file for $print/$mocname\n";
+ }
+ }
+
+ undef %mocFiles;
+ %mocFiles = %prunedMoc;
+}
+
+#-----------------------------------------------------------------------------
+
+# Finds the cpp files (If they exist).
+# The cpp files get appended to the header file separated by \035
+sub checkMocCandidates ()
+{
+ my @cppFiles = ();
+
+ foreach $mocFile (keys (%mocFiles))
+ {
+ # Find corresponding c++ files that includes the moc file
+ @cppFiles = `echo \`ls -1d $cppExt 2> /dev/null | egrep -v "\.moc\.$cxxsuffix\$" | egrep -v "all_$cxxsuffix\.$cxxsuffix\$"\``;
+
+ if (@cppFiles) {
+ my $files = join(" ", @cppFiles);
+ @cppFiles =
+ `egrep -l "^[ ]*#include[ ]*.$mocFile\.moc." $files 2>/dev/null`;
+ }
+
+ if (@cppFiles == 1)
+ {
+ chomp $cppFiles[0];
+ $mocFiles{$mocFile} .= "\035" . $cppFiles[0];
+ push(@deped, $mocFile);
+ next;
+ }
+
+ if (@cppFiles == 0)
+ {
+ push (@newObs, $mocFile); # Produce new object file
+ next if ($haveAutomocTag); # This is expected...
+ # But this is an error we can deal with - let them know
+ print STDERR
+ "Warning: No c++ file that includes $mocFile.moc\n";
+ next;
+ }
+ else
+ {
+ # We can't decide which file to use, so it's fatal. Although as a
+ # guess we could use the mocFile.cpp file if it's in the list???
+ print STDERR
+ "Error: Multiple c++ files that include $mocFile.moc\n";
+ print STDERR "\t",join ("\t", @cppFiles),"\n";
+ $errorflag = 1;
+ delete $mocFiles{$mocFile};
+ # Let's continue and see what happens - They have been told!
+ }
+ }
+}
+
+#-----------------------------------------------------------------------------
+
+# Add the rules for generating moc source from header files
+# For Automoc output *.moc.cpp but normally we'll output *.moc
+# (We must compile *.moc.cpp separately. *.moc files are included
+# in the appropriate *.cpp file by the programmer)
+sub addMocRules ()
+{
+ my $cppFile;
+ my $hFile;
+
+ foreach $mocFile (keys (%mocFiles))
+ {
+ undef $cppFile;
+ ($dir, $hFile, $cppFile) = split ("\035", $mocFiles{$mocFile}, 3);
+ $dir =~ s#^\.#\$(srcdir)#;
+ if (defined ($cppFile))
+ {
+ $target_adds{"\$(srcdir)/$cppFile"} .= "$mocFile.moc ";
+ appendLines ("$mocFile.moc: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile.moc\n");
+ $cleanMoc .= " $mocFile.moc";
+ }
+ else
+ {
+ appendLines ("$mocFile$mocExt: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile$mocExt\n");
+ $cleanMoc .= " $mocFile$mocExt";
+ }
+ }
+}
+
+sub make_meta_classes ()
+{
+ return if ($kdeopts{"qtonly"});
+
+ my $cppFile;
+ my $hFile;
+ my $moc_class_headers = "";
+ my @cppFiles =
+ `grep -l "setMocClasses[ ]*(.*)[ ]*;" $cppExt 2> /dev/null`;
+ chomp(@cppFiles);
+ print STDOUT "C++ files with setMocClasses() = [".join(' ', @cppFiles)."]\n"
+ if $verbose;
+ foreach $program (@programs) {
+ my $mocs = "";
+ my @progsources = split(/[\s\034]+/, $sources{$program});
+ my @depmocs = split(' ', $depedmocs{$program});
+ my %shash = (), %mhash = ();
+ @shash{@progsources} = 1; # we are only interested in the existence
+ @mhash{@depmocs} = 1;
+
+ print STDOUT "program=$program\n" if ($verbose);
+ print STDOUT "psources=[".join(' ', keys %shash)."]\n" if ($verbose);
+ print STDOUT "depmocs=[".join(' ', keys %mhash)."]\n" if ($verbose);
+ print STDOUT "globalmocs=[".join(' ', keys(%globalmocs))."]\n" if ($verbose);
+ foreach my $mocFile (keys (%globalmocs))
+ {
+ undef $cppFile;
+ ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3);
+ $dir =~ s#^\.#\$(srcdir)#;
+ if (defined ($cppFile))
+ {
+ #print STDOUT "cpp=$cppFile\n";
+ $mocs .= " $mocFile.moc" if exists $shash{$cppFile};
+ }
+ else
+ {
+ # Bah. This is the case, if no C++ file includes the .moc
+ # file. We make a .moc.cpp file for that. Unfortunately this
+ # is not included in the %sources hash, but rather is mentioned
+ # in %depedmocs. If the user wants to use AUTO he can't just
+ # use an unspecific METAINCLUDES. Instead he must use
+ # program_METAINCLUDES. Anyway, it's not working real nicely.
+ # E.g. Its not clear what happens if user specifies two
+ # METAINCLUDES=AUTO in the same Makefile.am.
+ $mocs .= " $mocFile.moc.$cxxsuffix"
+ if exists $mhash{$mocFile.".moc.$cxxsuffix"};
+ }
+ }
+ $mocs .= $ui_mocs;
+ if ($mocs) {
+ print STDOUT "==> mocs=[".$mocs."]\n" if ($verbose);
+ my $sourcename = $program."_meta_unload";
+ my $ext = ($program =~ /_la$/) ? ".lo" : ".o";
+ my $srcfile = $sourcename.".$cxxsuffix";
+ my $objfile = $sourcename.$ext;
+ $moc_class_headers .= " $srcfile";
+ my $appl;
+ $appl = "$srcfile: $mocs\n";
+ $appl .= "\t\@echo 'creating $srcfile'\n";
+ $appl .= "\t-rm -f $srcfile\n";
+ $appl .= "\t\@echo 'static const char * _metalist_$program\[\] = {' > $srcfile\n";
+ $appl .= "\tcat $mocs | grep 'char.*className' | ";
+ $appl .= "sed -e 's/.*[^A-Za-z0-9_:]\\([A-Za-z0-9_:]*\\)::className.*\$\$/\\\"\\1\\\",/' | sort | uniq >> $srcfile\n";
+ $appl .= "\t\@echo '0};' >> $srcfile\n";
+ $appl .= "\t\@echo '#include <kunload.h>' >> $srcfile\n";
+ $appl .= "\t\@echo '_UNLOAD($program)' >> $srcfile\n";
+ $appl .= "\n";
+
+ $realObjs{$program} .= " \034" . $objfile . " ";
+ $sources{$program} .= " $srcfile";
+ $sources_changed{$program} = 1;
+ $dep_files .= " \$(DEPDIR)/$sourcename.P";
+
+ # now also add a dependency for the C++ file which includes a
+ # setMocClasses() call, and is part of this program (if any)
+ #foreach $cppFile (@cppFiles) {
+ #print STDOUT "testing $cppFile\n" if $verbose;
+ #if (exists $shash{$cppFile}) {
+ # $appl .= "\$(srcdir)/$cppFile: $header\n";
+ #}
+ #}
+ appendLines ($appl);
+ }
+ print STDOUT "\n" if $verbose;
+ }
+ if ($moc_class_headers) {
+ appendLines ("$cleantarget-moc-classes:\n\t-rm -f $moc_class_headers\n");
+ $target_adds{"$cleantarget-am"} .= "$cleantarget-moc-classes ";
+ }
+}
+
+#-----------------------------------------------------------------------------
+
+sub updateMakefile ()
+{
+ return if ($dryrun);
+
+ open (FILEOUT, "> $makefile")
+ || die "Could not create $makefile: $!\n";
+
+ print FILEOUT "\# $progId - " . '$Revision: 1.1.1.1 $ ' . "\n";
+ $MakefileData =~ s/\034/\\\n/g; # Restore continuation lines
+ print FILEOUT $MakefileData;
+ close FILEOUT;
+}
+
+#-----------------------------------------------------------------------------
+
+# The given line needs to be removed from the makefile
+# Do this by adding the special "removed line" comment at the line start.
+sub removeLine ($$)
+{
+ my ($lookup, $old) = @_;
+
+ $old =~ s/\034/\\\n#>- /g; # Fix continuation lines
+ $MakefileData =~ s/\n$lookup/\n#>\- $old/;
+}
+
+#-----------------------------------------------------------------------------
+
+# Replaces the old line with the new line
+# old line(s) are retained but tagged as removed. The new line(s) have the
+# "added" tag placed before it.
+sub substituteLine ($$)
+{
+ my ($lookup, $new) = @_;
+
+ if ($MakefileData =~ /\n($lookup)/) {
+ $old = $1;
+ $old =~ s/\034/\\\n#>\- /g; # Fix continuation lines
+ $new =~ s/\034/\\\n/g;
+ my $newCount = 1;
+ $newCount++ while ($new =~ /\n/g);
+
+ $MakefileData =~ s/\n$lookup/\n#>- $old\n#>\+ $newCount\n$new/;
+ } else {
+ print STDERR "Warning: substitution of \"$lookup\" in $printname failed\n";
+ }
+}
+
+#-----------------------------------------------------------------------------
+
+# Slap new lines on the back of the file.
+sub appendLines ($)
+{
+ my ($new) = @_;
+
+ $new =~ s/\034/\\\n/g; # Fix continuation lines
+ my $newCount = 1;
+ $newCount++ while ($new =~ /\n/g);
+
+ $MakefileData .= "\n#>\+ $newCount\n$new";
+}
+
+#-----------------------------------------------------------------------------
+
+# Restore the Makefile.in to the state it was before we fiddled with it
+sub restoreMakefile ()
+{
+ $MakefileData =~ s/# $progId[^\n\034]*[\n\034]*//g;
+ # Restore removed lines
+ $MakefileData =~ s/([\n\034])#>\- /$1/g;
+ # Remove added lines
+ while ($MakefileData =~ /[\n\034]#>\+ ([^\n\034]*)/)
+ {
+ my $newCount = $1;
+ my $removeLines = "";
+ while ($newCount--) {
+ $removeLines .= "[^\n\034]*([\n\034]|)";
+ }
+ $MakefileData =~ s/[\n\034]#>\+.*[\n\034]$removeLines/\n/;
+ }
+}
+
+#-----------------------------------------------------------------------------
Added: kde-extras/kfocus/branches/upstream/current/admin/conf.change.pl
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/conf.change.pl 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/conf.change.pl 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,111 @@
+#!/usr/bin/perl -w
+
+# this script patches a config.status file, to use our own perl script
+# in the main loop
+# we do it this way to circumvent hacking (and thereby including)
+# autoconf function (which are GPL) into our LGPL acinclude.m4.in
+# written by Michael Matz <matz at ifh.de>
+
+# we have to change two places
+# 1. the splitting of the substitutions into chunks of 90 (or even 48 in
+# later autoconf's
+# 2. the big main loop which patches all Makefile.in's
+use File::Basename;
+
+my $ac_aux_dir = dirname($0);
+my ($flag);
+my $ac_version = 0;
+my $vpath_seen = 0;
+$flag = 0;
+
+while (<>) {
+# usage of $flag: 0 -- we have seen nothing yet
+# 1 -- we are in (1)
+# 2 -- we have ended (1)
+# 3 -- we are in (2)
+# 4 -- we ended (2)
+
+ if ($flag == 4) {
+ print;
+ } elsif ($flag == 0) {
+# 1. begins with (including): "ac_max_sed_\S+\s*=\s*[0-9]+..."
+# ends with (excluding) "CONFIG_FILE=..."
+# in later autoconf (2.14.1) there is no CONFIG_FILES= line,
+# but instead the (2) directly follow (1)
+ if (/^\s*ac_max_sed_([a-z]+).*=\s*[0-9]+/ ) {
+ $flag = 1;
+ if ($1 eq 'lines') {
+ $ac_version = 2141;
+ } elsif ($1 eq 'cmds') {
+ $ac_version = 213;
+ }
+ # hmm, we don't know the autoconf version, but we try anyway
+ } else {
+ print;
+ }
+ } elsif ($flag == 1) {
+ if (/^\s*CONFIG_FILES=/ ) {
+ print;
+ $flag = 2;
+ } elsif (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
+ $flag = 3;
+ if ($ac_version != 2141) {
+ $ac_version = 2141;
+ }
+ }
+ } elsif ($flag == 2) {
+# 2. begins with: "for ac_file in.*CONFIG_FILES" (the next 'for' after (1))
+# end with: "rm -f conftest.s\*"
+ if (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
+ $flag = 3;
+ } else {
+ print;
+ }
+ } elsif ($flag == 3) {
+ if (/^\s*rm\s+-f\s+conftest/ ) {
+ $flag = 4;
+ insert_main_loop();
+ } elsif (/^\s*rm\s+-f\s+.*ac_cs_root/ ) {
+ $flag = 4;
+ insert_main_loop();
+ #die "hhhhhhh";
+ if ($ac_version != 2141) {
+ print STDERR "hmm, don't know autoconf version\n";
+ }
+ } elsif (/VPATH/ ) {
+ $vpath_seen = 1;
+ }
+ }
+}
+
+die "wrong input (flag != 4)" unless $flag == 4;
+print STDERR "hmm, don't know autoconf version\n" unless $ac_version;
+
+sub insert_main_loop {
+ print <<EOF;
+#echo Doing the fast build of Makefiles -- autoconf $ac_version
+if test "x\$ac_cs_root" = "x" ; then
+ ac_cs_root=conftest
+fi
+EOF
+ if ($vpath_seen) {
+ print <<EOF;
+# VPATH subst was seen in original config.status main loop
+echo '/^[ ]*VPATH[ ]*=[^:]*\$/d' >> \$ac_cs_root.subs
+EOF
+ }
+ print <<EOF;
+rm -f \$ac_cs_root.sacfiles
+for ac_file in .. \$CONFIG_FILES ; do
+ if test "x\$ac_file" != x..; then
+ echo \$ac_file >> \$ac_cs_root.sacfiles
+ fi
+done
+if test -f \$ac_cs_root.sacfiles ; then
+ perl $ac_aux_dir/config.pl "\$ac_cs_root" "\$ac_given_srcdir" "\$ac_given_INSTALL"
+fi
+rm -f \$ac_cs_root.s*
+
+EOF
+ return;
+}
Added: kde-extras/kfocus/branches/upstream/current/admin/config.guess
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/config.guess 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/config.guess 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,1356 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+# Free Software Foundation, Inc.
+
+timestamp='2000-12-02'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner <bothner at cygnus.com>.
+# Please send patches to <config-patches at gnu.org>.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
+#
+# Only a few systems have been added to this list; please add others
+# (but try to keep the structure clean).
+#
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+
+Report bugs and patches to <config-patches at gnu.org>.
+
+Written by Per Bothner.
+Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000
+Free Software Foundation, Inc. See the source for copying conditions."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t)
+ echo "$timestamp" ; exit 0 ;;
+ --help | --h* | -h )
+ echo "$usage"; exit 0 ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+
+dummy=dummy-$$
+trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script.
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int dummy(){}" > $dummy.c
+ for c in cc gcc c89 ; do
+ ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1
+ if test $? = 0 ; then
+ CC_FOR_BUILD="$c"; break
+ fi
+ done
+ rm -f $dummy.c $dummy.o
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi at noc.rutgers.edu 8/24/94.)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # Netbsd (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ # Determine the machine/vendor (is the vendor relevant).
+ case "${UNAME_MACHINE}" in
+ amiga) machine=m68k-unknown ;;
+ arm32) machine=arm-unknown ;;
+ atari*) machine=m68k-atari ;;
+ sun3*) machine=m68k-sun ;;
+ mac68k) machine=m68k-apple ;;
+ macppc) machine=powerpc-apple ;;
+ hp3[0-9][05]) machine=m68k-hp ;;
+ ibmrt|romp-ibm) machine=romp-ibm ;;
+ *) machine=${UNAME_MACHINE}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE}" in
+ i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep __ELF__ >/dev/null
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit 0 ;;
+ alpha:OSF1:*:*)
+ if test $UNAME_RELEASE = "V4.0"; then
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ fi
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ cat <<EOF >$dummy.s
+ .data
+\$Lformat:
+ .byte 37,100,45,37,120,10,0 # "%d-%x\n"
+
+ .text
+ .globl main
+ .align 4
+ .ent main
+main:
+ .frame \$30,16,\$26,0
+ ldgp \$29,0(\$27)
+ .prologue 1
+ .long 0x47e03d80 # implver \$0
+ lda \$2,-1
+ .long 0x47e20c21 # amask \$2,\$1
+ lda \$16,\$Lformat
+ mov \$0,\$17
+ not \$1,\$18
+ jsr \$26,printf
+ ldgp \$29,0(\$26)
+ mov 0,\$16
+ jsr \$26,exit
+ .end main
+EOF
+ $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+ if test "$?" = 0 ; then
+ case `./$dummy` in
+ 0-0)
+ UNAME_MACHINE="alpha"
+ ;;
+ 1-0)
+ UNAME_MACHINE="alphaev5"
+ ;;
+ 1-1)
+ UNAME_MACHINE="alphaev56"
+ ;;
+ 1-101)
+ UNAME_MACHINE="alphapca56"
+ ;;
+ 2-303)
+ UNAME_MACHINE="alphaev6"
+ ;;
+ 2-307)
+ UNAME_MACHINE="alphaev67"
+ ;;
+ esac
+ fi
+ rm -f $dummy.s $dummy
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ exit 0 ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit 0 ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit 0 ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit 0;;
+ amiga:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit 0 ;;
+ arc64:OpenBSD:*:*)
+ echo mips64el-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ arc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ hkmips:OpenBSD:*:*)
+ echo mips-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ pmax:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sgi:OpenBSD:*:*)
+ echo mips-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ wgrisc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit 0 ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit 0;;
+ SR2?01:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit 0;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee at wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit 0 ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit 0 ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ i86pc:SunOS:5.*:*)
+ echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit 0 ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit 0 ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ atari*:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit 0 ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit 0 ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit 0 ;;
+ sun3*:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mac68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme88k:OpenBSD:*:*)
+ echo m88k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit 0 ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit 0 ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit 0 ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit 0 ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit 0 ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy \
+ && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+ && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit 0 ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit 0 ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit 0 ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit 0 ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit 0 ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit 0 ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit 0 ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit 0 ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit 0 ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit 0 ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i?86:AIX:*:*)
+ echo i386-ibm-aix
+ exit 0 ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ echo rs6000-ibm-aix3.2.5
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit 0 ;;
+ *:AIX:*:4)
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=4.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit 0 ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit 0 ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit 0 ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit 0 ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit 0 ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit 0 ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit 0 ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit 0 ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ case "${HPUX_REV}" in
+ 11.[0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ esac ;;
+ esac
+ fi ;;
+ esac
+ if [ "${HP_ARCH}" = "" ]; then
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+ if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
+ rm -f $dummy.c $dummy
+ fi ;;
+ esac
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit 0 ;;
+ 3050*:HI-UX:*:*)
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ echo unknown-hitachi-hiuxwe2
+ exit 0 ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit 0 ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit 0 ;;
+ *9??*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit 0 ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit 0 ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit 0 ;;
+ i?86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit 0 ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit 0 ;;
+ hppa*:OpenBSD:*:*)
+ echo hppa-unknown-openbsd
+ exit 0 ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit 0 ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit 0 ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit 0 ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit 0 ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit 0 ;;
+ CRAY*X-MP:*:*:*)
+ echo xmp-cray-unicos
+ exit 0 ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE}
+ exit 0 ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+ exit 0 ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*T3D:*:*:*)
+ echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY-2:*:*:*)
+ echo cray2-cray-unicos
+ exit 0 ;;
+ F300:UNIX_System_V:*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit 0 ;;
+ F301:UNIX_System_V:*:*)
+ echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
+ exit 0 ;;
+ hp300:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ i?86:BSD/386:*:* | i?86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ *:FreeBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit 0 ;;
+ *:OpenBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ exit 0 ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit 0 ;;
+ i*:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit 0 ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit 0 ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i386-pc-interix
+ exit 0 ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit 0 ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit 0 ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ *:GNU:*:*)
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit 0 ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit 0 ;;
+ *:Linux:*:*)
+
+ # The BFD linker knows what the default object file format is, so
+ # first see if it will tell us. cd to the root directory to prevent
+ # problems with other programs or directories called `ld' in the path.
+ ld_supported_emulations=`cd /; ld --help 2>&1 \
+ | sed -ne '/supported emulations:/!d
+ s/[ ][ ]*/ /g
+ s/.*supported emulations: *//
+ s/ .*//
+ p'`
+ case "$ld_supported_emulations" in
+ *ia64)
+ echo "${UNAME_MACHINE}-unknown-linux"
+ exit 0
+ ;;
+ i?86linux)
+ echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+ exit 0
+ ;;
+ elf_i?86)
+ TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+ ;;
+ i?86coff)
+ echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+ exit 0
+ ;;
+ sparclinux)
+ echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+ exit 0
+ ;;
+ elf32_sparc)
+ echo "${UNAME_MACHINE}-unknown-linux-gnu"
+ exit 0
+ ;;
+ armlinux)
+ echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+ exit 0
+ ;;
+ elf32arm*)
+ echo "${UNAME_MACHINE}-unknown-linux-gnuoldld"
+ exit 0
+ ;;
+ armelf_linux*)
+ echo "${UNAME_MACHINE}-unknown-linux-gnu"
+ exit 0
+ ;;
+ m68klinux)
+ echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+ exit 0
+ ;;
+ elf32ppc | elf32ppclinux)
+ # Determine Lib Version
+ cat >$dummy.c <<EOF
+#include <features.h>
+#if defined(__GLIBC__)
+extern char __libc_version[];
+extern char __libc_release[];
+#endif
+main(argc, argv)
+ int argc;
+ char *argv[];
+{
+#if defined(__GLIBC__)
+ printf("%s %s\n", __libc_version, __libc_release);
+#else
+ printf("unkown\n");
+#endif
+ return 0;
+}
+EOF
+ LIBC=""
+ $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
+ if test "$?" = 0 ; then
+ ./$dummy | grep 1\.99 > /dev/null
+ if test "$?" = 0 ; then
+ LIBC="libc1"
+ fi
+ fi
+ rm -f $dummy.c $dummy
+ echo powerpc-unknown-linux-gnu${LIBC}
+ exit 0
+ ;;
+ shelf_linux)
+ echo "${UNAME_MACHINE}-unknown-linux-gnu"
+ exit 0
+ ;;
+ esac
+
+ if test "${UNAME_MACHINE}" = "alpha" ; then
+ cat <<EOF >$dummy.s
+ .data
+ \$Lformat:
+ .byte 37,100,45,37,120,10,0 # "%d-%x\n"
+
+ .text
+ .globl main
+ .align 4
+ .ent main
+ main:
+ .frame \$30,16,\$26,0
+ ldgp \$29,0(\$27)
+ .prologue 1
+ .long 0x47e03d80 # implver \$0
+ lda \$2,-1
+ .long 0x47e20c21 # amask \$2,\$1
+ lda \$16,\$Lformat
+ mov \$0,\$17
+ not \$1,\$18
+ jsr \$26,printf
+ ldgp \$29,0(\$26)
+ mov 0,\$16
+ jsr \$26,exit
+ .end main
+EOF
+ LIBC=""
+ $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+ if test "$?" = 0 ; then
+ case `./$dummy` in
+ 0-0)
+ UNAME_MACHINE="alpha"
+ ;;
+ 1-0)
+ UNAME_MACHINE="alphaev5"
+ ;;
+ 1-1)
+ UNAME_MACHINE="alphaev56"
+ ;;
+ 1-101)
+ UNAME_MACHINE="alphapca56"
+ ;;
+ 2-303)
+ UNAME_MACHINE="alphaev6"
+ ;;
+ 2-307)
+ UNAME_MACHINE="alphaev67"
+ ;;
+ esac
+
+ objdump --private-headers $dummy | \
+ grep ld.so.1 > /dev/null
+ if test "$?" = 0 ; then
+ LIBC="libc1"
+ fi
+ fi
+ rm -f $dummy.s $dummy
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
+ elif test "${UNAME_MACHINE}" = "mips" ; then
+ cat >$dummy.c <<EOF
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __MIPSEB__
+ printf ("%s-unknown-linux-gnu\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+ printf ("%sel-unknown-linux-gnu\n", argv[1]);
+#endif
+ return 0;
+}
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ elif test "${UNAME_MACHINE}" = "s390"; then
+ echo s390-ibm-linux && exit 0
+ elif test "${UNAME_MACHINE}" = "x86_64"; then
+ echo x86_64-unknown-linux-gnu && exit 0
+ elif test "${UNAME_MACHINE}" = "parisc" -o "${UNAME_MACHINE}" = "hppa"; then
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*)
+ echo hppa1.1-unknown-linux-gnu
+ ;;
+ PA8*)
+ echo hppa2.0-unknown-linux-gnu
+ ;;
+ *)
+ echo hppa-unknown-linux-gnu
+ ;;
+ esac
+ exit 0
+ else
+ # Either a pre-BFD a.out linker (linux-gnuoldld)
+ # or one that does not give us useful --help.
+ # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
+ # If ld does not provide *any* "supported emulations:"
+ # that means it is gnuoldld.
+ test -z "$ld_supported_emulations" \
+ && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+
+ case "${UNAME_MACHINE}" in
+ i?86)
+ VENDOR=pc;
+ ;;
+ *)
+ VENDOR=unknown;
+ ;;
+ esac
+ # Determine whether the default compiler is a.out or elf
+ cat >$dummy.c <<EOF
+#include <features.h>
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __ELF__
+# ifdef __GLIBC__
+# if __GLIBC__ >= 2
+ printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+# else
+ printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+# else
+ printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+#else
+ printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+#endif
+ return 0;
+}
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+ fi ;;
+# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
+# are messed up and put the nodename in both sysname and nodename.
+ i?86:DYNIX/ptx:4*:*)
+ echo i386-sequent-sysv4
+ exit 0 ;;
+ i?86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit 0 ;;
+ i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit 0 ;;
+ i?86:*:5:7*)
+ # Fixed at (any) Pentium or better
+ UNAME_MACHINE=i586
+ if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
+ echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ i?86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit 0 ;;
+ i?86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit 0 ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i386.
+ echo i386-pc-msdosdjgpp
+ exit 0 ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit 0 ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit 0 ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit 0 ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit 0 ;;
+ M68*:*:R3V[567]*:*)
+ test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+ 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4 && exit 0 ;;
+ m68*:LynxOS:2.*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit 0 ;;
+ i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit 0 ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit 0 ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit 0 ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit 0 ;;
+ PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel at ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit 0 ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes at openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit 0 ;;
+ *:*:*:FTX*)
+ # From seanf at swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit 0 ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit 0 ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit 0 ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit 0 ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit 0 ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit 0 ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Darwin:*:*)
+ echo `uname -p`-apple-darwin${UNAME_RELEASE}
+ exit 0 ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ if test "${UNAME_MACHINE}" = "x86pc"; then
+ UNAME_MACHINE=pc
+ fi
+ echo `uname -p`-${UNAME_MACHINE}-nto-qnx
+ exit 0 ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit 0 ;;
+ NSR-[KW]:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit 0 ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit 0 ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit 0 ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit 0 ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit 0 ;;
+ i?86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ if (version < 4)
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ else
+ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+#if !defined (ultrix)
+ printf ("vax-dec-bsd\n"); exit (0);
+#else
+ printf ("vax-dec-ultrix\n"); exit (0);
+#endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+ exit (1);
+}
+EOF
+
+$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
+rm -f $dummy.c $dummy
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit 0 ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit 0 ;;
+ c34*)
+ echo c34-convex-bsd
+ exit 0 ;;
+ c38*)
+ echo c38-convex-bsd
+ exit 0 ;;
+ c4*)
+ echo c4-convex-bsd
+ exit 0 ;;
+ esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+The $version version of this script cannot recognize your system type.
+Please download the most up to date version of the config scripts:
+
+ ftp://ftp.gnu.org/pub/gnu/config/
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches at gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess version = $version
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
Property changes on: kde-extras/kfocus/branches/upstream/current/admin/config.guess
___________________________________________________________________
Name: svn:executable
+
Added: kde-extras/kfocus/branches/upstream/current/admin/config.pl
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/config.pl 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/config.pl 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,210 @@
+#!/usr/bin/perl
+# a script for use by autoconf to make the Makefiles
+# from the Makefile.in's
+#
+# the original autoconf mechanism first splits all substitutions into groups
+# of ca. 90, and than invokes sed for _every_ Makefile.in and every group
+# (so around 2-3 times per Makefile.in). So this takes forever, as sed
+# has to recompile the regexps every time.
+#
+# this script does better. It changes all Makefile.ins in one process.
+# in kdelibs the time for building Makefile went down from 2:59 min to 13 sec!
+#
+# written by Michael Matz <matz at ifh.de>
+#
+# the first part was done by looking at the config.status files generated
+# by configure.
+#
+my $ac_cs_root=$ARGV[0];
+my $ac_given_srcdir=$ARGV[1];
+my $ac_given_INSTALL=$ARGV[2];
+
+# print "ac_cs_root=$ac_cs_root\n";
+# print "ac_given_srcdir=$ac_given_srcdir\n";
+# print "ac_given_INSTALL=$ac_given_INSTALL\n";
+
+my ($srcdir, $top_srcdir);
+my $INSTALL;
+my $bad_perl = ($] < 5.005);
+
+open(CF, "< $ac_cs_root.subs") || die "can't open $ac_cs_root.subs: $!";
+my @subs = <CF>;
+close(CF);
+chomp @subs;
+ at comp_match=();
+ at comp_subs=();
+
+if ($bad_perl) {
+ print "Using perl older than version 5.005\n";
+ foreach my $pat (@subs) {
+ if ( ($pat =~ /s%([^%]*)%([^%]*)%g/ )
+ || ($pat =~ m%/([^/]*)/([^/]*)/g% )
+ || ($pat =~ /s%([^%]*)%([^%]*)%;t/ )
+ || ($pat =~ m%/([^/]*)/([^/]*)/;t% )
+ ) {
+ # form : s%bla%blubb%g
+ # or s%bla%blubb%;t t (newer autoconf)
+ push @comp_subs, make_closure($1, $2);
+ } elsif ( ($pat =~ /%([^%]*)%d/ )
+ || ($pat =~ m%/([^/]*)/d% )
+ ) {
+ push @comp_subs, make_closure($1, "");
+ } else {
+ die "Uhh. Malformed pattern in $ac_cs_root.subs ($pat)"
+ unless ( $pat =~ /^\s*$/ ); # ignore white lines
+ }
+ }
+} else {
+ foreach my $pat (@subs) {
+ if ( ($pat =~ /s%([^%]*)%([^%]*)%g/ )
+ || ($pat =~ m%/([^/]*)/([^/]*)/g% )
+ || ($pat =~ /s%([^%]*)%([^%]*)%;t/ )
+ || ($pat =~ m%/([^/]*)/([^/]*)/;t% )
+ ) {
+ # form : s%bla%blubb%g
+ # or s%bla%blubb%;t t (newer autoconf)
+ push @comp_match, eval "qr/\Q$1\E/"; # compile match pattern
+ push @comp_subs, $2;
+ } elsif ( ($pat =~ /%([^%]*)%d/ )
+ || ($pat =~ m%/([^/]*)/d% )
+ ) {
+ push @comp_match, eval "qr/\Q$1\E/";
+ push @comp_subs, "";
+ } else {
+ die "Uhh. Malformed pattern in $ac_cs_root.subs ($pat)"
+ unless ( $pat =~ /^\s*$/ ); # ignore white lines
+ }
+ }
+}
+undef @subs;
+
+# read the list of files to be patched, form:
+# ./Makefile arts/Makefile arts/examples/Makefile arts/flow/Makefile
+
+open(CF, "< $ac_cs_root.sacfiles") || die "can't open $ac_cs_root.sacfiles: $!";
+my @ac_files = <CF>;
+close(CF);
+chomp @ac_files;
+
+my $ac_file;
+foreach $ac_file (@ac_files) {
+ next if $ac_file =~ /\.\./;
+ next if $ac_file =~ /^\s*$/;
+ my $ac_file_in;
+ my ($ac_dir, $ac_dots, $ac_dir_suffix);
+
+ if ($ac_file =~ /.*:.*/ ) {
+ ($ac_file_in = $ac_file) =~ s%[^:]*:%%;
+ $ac_file =~ s%:.*%%;
+ } else {
+ $ac_file_in = $ac_file.".in";
+ }
+
+# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+# Remove last slash and all that follows it. Not all systems have dirname.
+ ($ac_dir = $ac_file) =~ s%/[^/][^/]*$%%;
+ if ( ($ac_dir ne $ac_file) && ($ac_dir ne ".")) {
+# The file is in a subdirectory.
+ if (! -d "$ac_dir") { mkdir "$ac_dir", 0777; }
+ ($ac_dir_suffix = $ac_dir) =~ s%^./%%;
+ $ac_dir_suffix="/".$ac_dir_suffix;
+# A "../" for each directory in $ac_dir_suffix.
+ ($ac_dots = $ac_dir_suffix) =~ s%/[^/]*%../%g;
+ } else {
+ $ac_dir_suffix="";
+ $ac_dots="";
+ }
+
+ if ($ac_given_srcdir eq ".") {
+ $srcdir=".";
+ if ($ac_dots) {
+ ( $top_srcdir = $ac_dots) =~ s%/$%%;
+ } else { $top_srcdir="."; }
+ } elsif ($ac_given_srcdir =~ m%^/%) {
+ $srcdir=$ac_given_srcdir.$ac_dir_suffix;
+ $top_srcdir = $ac_given_srcdir;
+ } else {
+ $srcdir = $ac_dots.$ac_given_srcdir.$ac_dir_suffix;
+ $top_srcdir = $ac_dots.$ac_given_srcdir;
+ }
+
+ if ($ac_given_INSTALL) {
+ if ($ac_given_INSTALL =~ m%^/% ) {
+ $INSTALL = $ac_given_INSTALL;
+ } else {
+ $INSTALL = $ac_dots.$ac_given_INSTALL;
+ }
+ }
+
+ print "fast creating $ac_file\n";
+ unlink $ac_file;
+ my $ac_comsub="";
+ my $fname=$ac_file_in;
+ $fname =~ s%.*/%%;
+ my $configure_input="Generated automatically from $fname by config.pl.";
+ if ($ac_file =~ /.*[Mm]akefile.*/) {
+ $ac_comsub="# ".$configure_input."\n"; # for the first line in $ac_file
+ }
+
+ my $ac_file_inputs;
+ ($ac_file_inputs = $ac_file_in) =~ s%^%$ac_given_srcdir/%;
+ $ac_file_inputs =~ s%:% $ac_given_srcdir/%g;
+
+ patch_file($ac_file, $ac_file_inputs, $ac_comsub);
+}
+
+sub patch_file {
+ my ($outf, $infiles, $firstline) = @_;
+ my $filedata;
+ my @infiles=split(' ', $infiles);
+ my $i=0;
+
+ if ($firstline) {
+ $filedata = $firstline;
+ }
+ foreach my $name (@infiles) {
+ if (open(CF, "< $name")) {
+ while (<CF>) {
+ $filedata .= $_;
+ }
+ close(CF);
+ } else {
+ print STDERR "can't open $name: $!"."\n";
+ }
+ }
+
+ $filedata =~ s%\@configure_input\@%$configure_input%g;
+ $filedata =~ s%\@srcdir\@%$srcdir%g;
+ $filedata =~ s%\@top_srcdir\@%$top_srcdir%g;
+ $filedata =~ s%\@INSTALL\@%$INSTALL%g;
+
+ if ($bad_perl) {
+ while ($i <= $#comp_subs) {
+ my $ref = $comp_subs[$i];
+ &$ref(\$filedata);
+ $i++;
+ }
+ } else {
+ while ($i <= $#comp_match) {
+ $filedata =~ s/$comp_match[$i]/$comp_subs[$i]/g;
+ $i++;
+ }
+ }
+ open(CF, "> $outf") || die "can't create $outf: $!";
+ print CF $filedata;
+ close(CF);
+}
+
+sub make_closure {
+ my ($pat, $sub) = @_;
+ $pat =~ s/\@/\\@/g; # @bla@ -> \@bla\@
+ $pat =~ s/\$/\\\$/g; # $bla -> \$bla
+ $sub =~ s/\@/\\@/g;
+ $sub =~ s/\$/\\\$/g;
+ my $ret = eval "return sub { my \$ref=shift; \$\$ref =~ s%$pat%$sub%g; }";
+ if ($@) {
+ print "can't create CODE: $@\n";
+ }
+ return $ret;
+}
Added: kde-extras/kfocus/branches/upstream/current/admin/config.sub
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/config.sub 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/config.sub 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,1337 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+# Free Software Foundation, Inc.
+
+timestamp='2000-11-26'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Please send patches to <config-patches at gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+
+Report bugs and patches to <config-patches at gnu.org>.
+
+Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000
+Free Software Foundation, Inc. See the source for copying conditions."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit 0 ;;
+ --help | --h* | -h )
+ echo "$usage"; exit 0 ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit 0;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | storm-chaos*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis)
+ os=
+ basic_machine=$1
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc \
+ | arm | arme[lb] | arm[bl]e | armv[2345] | armv[345][lb] | strongarm | xscale \
+ | pyramid | mn10200 | mn10300 | tron | a29k \
+ | 580 | i960 | h8300 \
+ | x86 | ppcbe | mipsbe | mipsle | shbe | shle \
+ | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
+ | hppa64 \
+ | alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
+ | alphaev6[78] \
+ | we32k | ns16k | clipper | i370 | sh | sh[34] \
+ | powerpc | powerpcle \
+ | 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
+ | mips64orion | mips64orionel | mipstx39 | mipstx39el \
+ | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
+ | mips64vr5000 | miprs64vr5000el | mcore \
+ | sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
+ | thumb | d10v | d30v | fr30 | avr)
+ basic_machine=$basic_machine-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12)
+ # Motorola 68HC11/12.
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl)
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i[234567]86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ # FIXME: clean up the formatting here.
+ vax-* | tahoe-* | i[234567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
+ | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | c[123]* \
+ | arm-* | armbe-* | armle-* | armv*-* | strongarm-* | xscale-* \
+ | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
+ | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
+ | xmp-* | ymp-* \
+ | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* \
+ | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
+ | hppa2.0n-* | hppa64-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
+ | alphaev6[78]-* \
+ | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+ | clipper-* | orion-* \
+ | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
+ | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
+ | mips64el-* | mips64orion-* | mips64orionel-* \
+ | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
+ | mipstx39-* | mipstx39el-* | mcore-* \
+ | f301-* | s390-* | sv1-* | t3e-* \
+ | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
+ | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* \
+ | bs2000-* | tic54x-* | c54x-* | x86_64-*)
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ cray2)
+ basic_machine=cray2-cray
+ os=-unicos
+ ;;
+ [ctj]90-cray)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+# I'm not sure what "Sysv32" means. Should this be sysv3.2?
+ i[34567]86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i[34567]86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i[34567]86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i[34567]86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ i386-go32 | go32)
+ basic_machine=i386-unknown
+ os=-go32
+ ;;
+ i386-mingw32 | mingw32)
+ basic_machine=i386-unknown
+ os=-mingw32
+ ;;
+ i[34567]86-pw32 | pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mipsel*-linux*)
+ basic_machine=mipsel-unknown
+ os=-linux-gnu
+ ;;
+ mips*-linux*)
+ basic_machine=mips-unknown
+ os=-linux-gnu
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ mmix*)
+ basic_machine=mmix-knuth
+ os=-mmixware
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ msdos)
+ basic_machine=i386-unknown
+ os=-msdos
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pentium | p5 | k5 | k6 | nexgen)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2)
+ basic_machine=i686-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc) basic_machine=powerpc-unknown
+ ;;
+ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sparclite-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=t3e-cray
+ os=-unicos
+ ;;
+ tic54x | c54x*)
+ basic_machine=tic54x-unknown
+ os=-coff
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xmp)
+ basic_machine=xmp-cray
+ os=-unicos
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ mips)
+ if [ x$os = x-linux-gnu ]; then
+ basic_machine=mips-unknown
+ else
+ basic_machine=mips-mips
+ fi
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh3 | sh4)
+ basic_machine=sh-unknown
+ ;;
+ sparc | sparcv9)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ c4x*)
+ basic_machine=c4x-none
+ os=-coff
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* | -storm-chaos*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i[34567]86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto*)
+ os=-nto-qnx
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -*MiNT)
+ os=-mint
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ # This also exists in the configure program, but was not the
+ # default.
+ # os=-sunos4
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f301-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -vxsim* | -vxworks*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -*MiNT)
+ vendor=atari
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
Property changes on: kde-extras/kfocus/branches/upstream/current/admin/config.sub
___________________________________________________________________
Name: svn:executable
+
Added: kde-extras/kfocus/branches/upstream/current/admin/configure.in.min
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/configure.in.min 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/configure.in.min 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,37 @@
+# Original Author was Kalle at kde.org
+# I lifted it in some mater. (Stephan Kulow)
+# I used much code from Janos Farkas
+
+dnl Process this file with autoconf to produce a configure script.
+
+AC_INIT(acinclude.m4) dnl a source file from your sub dir
+
+dnl This is so we can use kde-common
+AC_CONFIG_AUX_DIR(admin)
+
+AC_CANONICAL_SYSTEM
+AC_ARG_PROGRAM
+
+dnl Automake doc recommends to do this only here. (Janos)
+AM_INIT_AUTOMAKE(@MODULENAME@, @VERSION@) dnl searches for some needed programs
+
+KDE_SET_PREFIX
+
+dnl generate the config header
+AM_CONFIG_HEADER(config.h) dnl at the distribution this done
+
+dnl Checks for programs.
+AC_CHECK_COMPILERS
+AC_ENABLE_SHARED(yes)
+AC_ENABLE_STATIC(no)
+KDE_PROG_LIBTOOL
+
+dnl for NLS support. Call them in this order!
+dnl WITH_NLS is for the po files
+AM_KDE_WITH_NLS
+
+AC_PATH_KDE
+
+dnl Perform program name transformation
+AC_ARG_PROGRAM
+
Added: kde-extras/kfocus/branches/upstream/current/admin/debianrules
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/debianrules 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/debianrules 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,82 @@
+#!/usr/bin/perl -w
+
+use Shell qw(mv cp mkdir rm) ;
+use File::Find;
+use Cwd;
+
+$origPwd = `pwd`;
+chomp $origPwd;
+
+
+if (@ARGV && $ARGV[0] eq 'cleanup') {
+
+if (-d "debian/tmp/usr/share/config") {
+ if (! -d "debian/tmp/$kde_confdir") {
+ system("mv debian/tmp/usr/share/config debian/tmp/$kde_confdir");
+ }
+}
+system("rm -f `find debian/ -name \".anchors\"`");
+system("chmod 755 debian/*preinst debian/*postinst");
+
+exit;
+}
+
+$QTDIR="/usr/share/qt";
+$kde_prefix="/usr";
+$kde_htmldir="$kde_prefix/share/doc/kde/HTML";
+$kde_icondir="$kde_prefix/share/icons";
+$kde_sounddir="$kde_prefix/share/sounds";
+$kde_datadir="$kde_prefix/share/apps";
+$kde_locale="$kde_prefix/share/locale";
+$kde_confdir="/etc/kde2";
+$kde_cgidir="$kde_prefix/lib/cgi-bin";
+$kde_appsdir="$kde_prefix/share/applnk";
+$kde_mimedir="$kde_prefix/share/mimelnk";
+$kde_wallpaperdir="$kde_prefix/share/wallpapers";
+$kde_bindir="$kde_prefix/bin";
+$kde_servicesdir="$kde_prefix/share/services";
+$kde_servicetypesdir="$kde_prefix/share/servicetypes";
+$kde_includedir="$kde_prefix/include/kde";
+$kde_libdir="$kde_prefix/lib";
+$mandir="$kde_prefix/share/man";
+$infodir="$kde_prefix/share/info";
+$IDL="$kde_bindir/cuteidl";
+$DCOPIDL="$kde_bindir/dcopidl";
+$DCOPIDL2CPP="$kde_bindir/dcopidl2cpp";
+$KDB2HTML="$kde_bindir/kdb2html";
+$MCOPIDL="$kde_bindir/mcopidl";
+$ARTSCCONFIG="$kde_bindir/artsc-config";
+
+if (@ARGV && $ARGV[0] eq 'echodirs') {
+ print STDOUT "export kde_htmldir=$kde_htmldir\n";
+ print STDOUT "export kde_appsdir=$kde_appsdir\n";
+ print STDOUT "export kde_icondir=$kde_icondir\n";
+ print STDOUT "export kde_sounddir=$kde_sounddir\n";
+ print STDOUT "export kde_datadir=$kde_datadir\n";
+ print STDOUT "export kde_cgidir=$kde_cgidir\n";
+ print STDOUT "export kde_locale=$kde_locale\n";
+ print STDOUT "export kde_confdir=$kde_confdir\n";
+ print STDOUT "export kde_mimedir=$kde_mimedir\n";
+ print STDOUT "export kde_wallpaperdir=$kde_wallpaperdir\n";
+ print STDOUT "export kde_bindir=$kde_bindir\n";
+ print STDOUT "export kde_servicesdir=$kde_servicesdir\n";
+ print STDOUT "export kde_servicetypesdir=$kde_servicetypesdir\n";
+ print STDOUT "export kde_includedir=$kde_includedir\n";
+ print STDOUT "export kde_libdir=$kde_libdir\n";
+ print STDOUT "export mandir=$mandir\n";
+ print STDOUT "export infodir=$infodir\n";
+ print STDOUT "export QTDIR=$QTDIR\n";
+ print STDOUT "export kde_prefix=$kde_prefix\n";
+ print STDOUT "export INSTALL_DATA=install -p -c -m 644\n";
+ print STDOUT "export IDL=$IDL\n";
+ print STDOUT "export DCOPIDL=$DCOPIDL\n";
+ print STDOUT "export DCOPIDL2CPP=$DCOPIDL2CPP\n";
+ print STDOUT "export KDB2HTML=$KDB2HTML\n";
+ print STDOUT "export MCOPIDL=$MCOPIDL\n";
+ print STDOUT "export ARTSCCONFIG=$ARTSCCONFIG\n";
+ print STDOUT "configkde=--disable-rpath --prefix=\$(kde_prefix) --libexecdir=\$(kde_bindir) --with-qt-includes=/usr/include/qt --mandir=\$(mandir) --infodir=\$(infodir)\n";
+ print STDOUT "configkdevelop=--enable-docbase --enable-kdoc2 --disable-rpath --libdir=\$(kde_libdir) --includedir=\$(kde_includedir) --with-qt-includes=/usr/include/qt --mandir=\$(mandir) --with-kdelibsdoc-dir=/usr/share/doc/kdelibs3-doc/html\n";
+ print STDOUT "configkdepim=--with-extra-includes=/usr/include/libpisock --enable-shared --disable-rpath --prefix=\$(kde_prefix) --libexecdir=\$(kde_bindir) --with-qt-includes=/usr/include/qt --mandir=\$(mandir) --infodir=\$(infodir)\n";
+ exit
+}
+
Property changes on: kde-extras/kfocus/branches/upstream/current/admin/debianrules
___________________________________________________________________
Name: svn:executable
+
Added: kde-extras/kfocus/branches/upstream/current/admin/depcomp
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/depcomp 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/depcomp 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,269 @@
+#! /bin/sh
+
+# depcomp - compile a program generating dependencies as side-effects
+# Copyright (C) 1999 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# Originally written by Alexandre Oliva <oliva at dcc.unicamp.br>.
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+# `libtool' can also be set to `yes' or `no'.
+
+depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ if "$@" -Wp,"$gccflag$tmpdepfile"; then :
+ else
+ stat=$?
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ sed 's/^[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+dashmd)
+ # The Java front end to gcc doesn't run cpp, so we can't use the -Wp
+ # trick. Instead we must use -M and then rename the resulting .d
+ # file. This is also the case for older versions of gcc, which
+ # don't implement -Wp.
+ if "$@" -MD; then :
+ else
+ stat=$?
+ rm -f FIXME
+ exit $stat
+ fi
+ FIXME: rewrite the file
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wc,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ stat=$?
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ sed 's/^[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the proprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
+ test -z "$dashmflag" && dashmflag=-M
+ ( IFS=" "
+ case " $* " in
+ *" --mode=compile "*) # this is libtool, let us make it quiet
+ for arg
+ do # cycle over the arguments
+ case "$arg" in
+ "--mode=compile")
+ # insert --quiet before "--mode=compile"
+ set fnord "$@" --quiet
+ shift # fnord
+ ;;
+ esac
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # "$arg"
+ done
+ ;;
+ esac
+ "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ ) &
+ proc=$!
+ "$@"
+ stat=$?
+ wait "$proc"
+ if test "$stat" != 0; then exit $stat; fi
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ # X makedepend
+ (
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in no)
+ set ""; shift
+ cleared=yes
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift;;
+ -*)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ ) &
+ proc=$!
+ "$@"
+ stat=$?
+ wait "$proc"
+ if test "$stat" != 0; then exit $stat; fi
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tail +3 "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the proprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
+ ( IFS=" "
+ case " $* " in
+ *" --mode=compile "*)
+ for arg
+ do # cycle over the arguments
+ case "$arg" in
+ "--mode=compile")
+ # insert --quiet before "--mode=compile"
+ set fnord "$@" --quiet
+ shift # fnord
+ ;;
+ esac
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # "$arg"
+ done
+ ;;
+ esac
+ "$@" -E |
+ sed -n '/^# [0-9][0-9]* "\([^"]*\)"/ s::'"$object"'\: \1:p' > "$tmpdepfile"
+ ) &
+ proc=$!
+ "$@"
+ stat=$?
+ wait "$proc"
+ if test "$stat" != 0; then exit $stat; fi
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed < "$tmpdepfile" -e 's/^[^:]*: //' -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
Property changes on: kde-extras/kfocus/branches/upstream/current/admin/depcomp
___________________________________________________________________
Name: svn:executable
+
Added: kde-extras/kfocus/branches/upstream/current/admin/install-sh
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/install-sh 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/install-sh 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,248 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission. M.I.T. makes no representations about the
+# suitability of this software for any purpose. It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+ case $1 in
+ -c) instcmd="$cpprog"
+ shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd="$stripprog"
+ shift
+ continue;;
+
+ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ shift
+ continue;;
+
+ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ shift
+ continue;;
+
+ *) if [ x"$src" = x ]
+ then
+ src="$1"
+ else
+ # this colon is to work around a 386BSD /bin/sh bug
+ :
+ dst="$1"
+ fi
+ shift
+ continue;;
+ esac
+done
+
+if [ x"$src" = x ]
+then
+ echo "install: no input file specified"
+ exit 1
+else
+ true
+fi
+
+if [ x"$dir_arg" != x ]; then
+ dst="$src"
+ src=""
+
+ if [ -d $dst ]; then
+ instcmd=:
+ else
+ instcmd=mkdir
+ fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+
+ if [ -f "$src" -o -d "$src" ]
+ then
+ true
+ else
+ echo "install: $src does not exist"
+ exit 1
+ fi
+
+ if [ x"$dst" = x ]
+ then
+ echo "install: no destination specified"
+ exit 1
+ else
+ true
+ fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+ if [ -d "$dst" ]
+ then
+ dst="$dst"/`basename $src`
+ else
+ true
+ fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+# this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+ pathcomp="${pathcomp}${1}"
+ shift
+
+ if [ ! -d "${pathcomp}" ] ;
+ then
+ $mkdirprog "${pathcomp}"
+ else
+ true
+ fi
+
+ pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+ $doit $instcmd $dst &&
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+ if [ x"$transformarg" = x ]
+ then
+ dstfile=`basename "$dst"`
+ else
+ dstfile=`basename "$dst" $transformbasename |
+ sed $transformarg`$transformbasename
+ fi
+
+# don't allow the sed command to completely eliminate the filename
+
+ if [ x"$dstfile" = x ]
+ then
+ dstfile=`basename "$dst"`
+ else
+ true
+ fi
+
+# Make a temp file name in the proper directory.
+
+ dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+ $doit $instcmd "$src" "$dsttmp" &&
+
+ trap "rm -f \"${dsttmp}\"" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing. If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+ $doit $rmcmd -f "$dstdir/$dstfile" &&
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+fi &&
+
+
+exit 0
Property changes on: kde-extras/kfocus/branches/upstream/current/admin/install-sh
___________________________________________________________________
Name: svn:executable
+
Added: kde-extras/kfocus/branches/upstream/current/admin/libtool.m4.in
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/libtool.m4.in 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/libtool.m4.in 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,876 @@
+## libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
+## Copyright 1996, 1997, 1998, 1999, 2000, 2001
+## Free Software Foundation, Inc.
+## Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful, but
+## WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+##
+## As a special exception to the GNU General Public License, if you
+## distribute this file as part of a program that contains a
+## configuration script generated by Autoconf, you may include it under
+## the same distribution terms that you use for the rest of that program.
+
+# serial 46 AC_PROG_LIBTOOL
+AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
+ AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [AC_LIBTOOL_CXX],
+ [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
+])])
+
+dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
+dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
+ AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [AC_LIBTOOL_GCJ],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [AC_LIBTOOL_GCJ],
+ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
+ [AC_LIBTOOL_GCJ],
+ [ifdef([AC_PROG_GCJ],
+ [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
+])])
+ ifdef([A][M_PROG_GCJ],
+ [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
+])])
+ ifdef([LT_AC_PROG_GCJ],
+ [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
+])])])])])])
+
+AC_DEFUN([_AC_PROG_LIBTOOL],
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+
+# Save cache, so that ltconfig can load it
+AC_CACHE_SAVE
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Reload cache, that may have been modified by ltconfig
+AC_CACHE_LOAD
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+AC_DEFUN([AC_LIBTOOL_SETUP],
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+AC_REQUIRE([AC_OBJEXT])dnl
+AC_REQUIRE([AC_EXEEXT])dnl
+dnl
+
+# Only perform the check for file, if the check method requires it
+case "$deplibs_check_method" in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ AC_PATH_MAGIC
+ fi
+ ;;
+esac
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+AC_ARG_WITH(pic,
+ [ --with-pic try to use only PIC/non-PIC objects [default=use both]],
+ pic_mode="$withval", pic_mode=default)
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$host" in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case "`/usr/bin/file conftest.$ac_objext`" in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_SAVE
+ AC_LANG_C
+ AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_RESTORE])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+
+ # recent cygwin and mingw systems supply a stub DllMain which the user
+ # can override, but on older systems we have to supply one
+ AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
+ [AC_TRY_LINK([],
+ [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
+ DllMain (0, 0, 0);],
+ [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
+
+ case "$host/$CC" in
+ *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
+ # old mingw systems require "-dll" to link a DLL, while more recent ones
+ # require "-mdll"
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -mdll"
+ AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
+ [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
+ CFLAGS="$SAVE_CFLAGS" ;;
+ *-*-cygwin* | *-*-pw32*)
+ # cygwin systems need to pass --dll to the linker, and not link
+ # crt.o which will require a WinMain at 16 definition.
+ lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
+ esac
+ ;;
+ ])
+esac
+])
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_LIBTOOL_PICMODE - implement the --with-pic flag
+# Usage: AC_LIBTOOL_PICMODE[(MODE)]
+# Where MODE is either `yes' or `no'. If omitted, it defaults to
+# `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)])
+
+
+# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case "$MAGIC_CMD" in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="ifelse([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$1; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -n "$file_magic_test_file"; then
+ case "$deplibs_check_method" in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool at gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+])
+
+
+# AC_PATH_MAGIC - find a file program which can recognise a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
+AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
+ else
+ MAGIC_CMD=:
+ fi
+fi
+])
+
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case "$ac_prog" in
+ # Accept absolute paths.
+changequote(,)dnl
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+changequote([,])dnl
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])
+
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ lt_cv_prog_gnu_ld=yes
+else
+ lt_cv_prog_gnu_ld=no
+fi])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])
+
+# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
+[lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+])
+
+# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognise dependant libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case "$host_os" in
+aix4*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi4*)
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ changequote([, ])dnl
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin* | mingw* |pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
+ ;;
+
+freebsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case "$host_cpu" in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+ changequote([, ])dnl
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20*|hpux11*)
+ # TODO: Does this work for hpux-11 too?
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ changequote([, ])dnl
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+
+irix5* | irix6*)
+ case "$host_os" in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case "$LD" in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ changequote(,)dnl
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ changequote([, ])dnl
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ case "$host_cpu" in
+ alpha* | i*86 | powerpc* | sparc* | ia64* | s390* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ changequote([, ])dnl
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ [lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library']
+ else
+ [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object']
+ fi
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+
+openbsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case "$host_cpu" in
+ i*86 )
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library'
+ changequote([, ])dnl
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+newsos6)
+ [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case "$host_vendor" in
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ motorola)
+ changequote(,)dnl
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ changequote([, ])dnl
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ esac
+ ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+])
+
+
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ else
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+AC_MSG_RESULT([$NM])
+])
+
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case "$host" in
+*-*-beos* | *-*-cygwin* | *-*-pw32*)
+ # These system don't have libm
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
+ ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-convenience to the
+# configure arguments. Note that LIBLTDL and INCLTDL are not
+# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
+# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
+# with '${top_builddir}/' and INCLTDL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!). If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ case "$enable_ltdl_convenience" in
+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+ "") enable_ltdl_convenience=yes
+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+ esac
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+ INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-install to the configure
+# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
+# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
+# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
+# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
+# with '${top_srcdir}/' (note the single quotes!). If your package is
+# not flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
+ ])
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+ INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
+ fi
+])
+
+# If this macro is not defined by Autoconf, define it here.
+ifdef([AC_PROVIDE_IFELSE],
+ [],
+ [define([AC_PROVIDE_IFELSE],
+ [ifdef([AC_PROVIDE_$1],
+ [$2], [$3])])])
+
+# AC_LIBTOOL_CXX - enable support for C++ libraries
+AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
+
+AC_DEFUN([_AC_LIBTOOL_CXX],
+[AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([AC_PROG_CXXCPP])
+LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
+lt_save_CC="$CC"
+lt_save_CFLAGS="$CFLAGS"
+dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
+dnl is set to the C++ compiler.
+AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" \
+file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
+--build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
+|| AC_MSG_ERROR([libtool tag configuration failed])
+CC="$lt_save_CC"
+CFLAGS="$lt_save_CFLAGS"
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+# AC_LIBTOOL_GCJ - enable support for GCJ libraries
+AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
+
+AC_DEFUN([_AC_LIBTOOL_GCJ],
+[AC_REQUIRE([AC_PROG_LIBTOOL])
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
+ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
+ [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
+ [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
+ [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
+LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
+lt_save_CC="$CC"
+lt_save_CFLAGS="$CFLAGS"
+dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
+dnl is set to the C++ compiler.
+AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" \
+file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
+--build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
+|| AC_MSG_ERROR([libtool tag configuration failed])
+CC="$lt_save_CC"
+CFLAGS="$lt_save_CFLAGS"
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+dnl old names
+AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
+AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
+AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
+
+AC_DEFUN([LT_AC_PROG_GCJ],
+[AC_CHECK_TOOL(GCJ, gcj, no)
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)
+])
Added: kde-extras/kfocus/branches/upstream/current/admin/ltcf-c.sh
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/ltcf-c.sh 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/ltcf-c.sh 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,746 @@
+#### This script is meant to be sourced by ltconfig.
+
+# $Id: ltcf-c.sh,v 1.1.1.1 2001/08/28 19:08:47 wehjin Exp $
+
+# ltcf-c.sh - Create a C compiler specific configuration
+#
+# Copyright (C) 1996-2000 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='main(){return(0);}'
+
+## Linker Characteristics
+case "$host_os" in
+cygwin* | mingw*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$with_gcc" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # See if GNU ld supports shared libraries.
+ case "$host_os" in
+ aix3* | aix4*)
+ # On AIX, the GNU linker is very broken
+ ld_shlibs=no
+ cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+ ;;
+
+ amigaos*)
+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+
+ # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we can use
+ # them.
+ ld_shlibs=no
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+
+ extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
+ sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/impgen.c~
+ test -f $output_objdir/impgen.exe || (cd $output_objdir && \
+ if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
+ else $CC -o impgen impgen.c ; fi)~
+ $output_objdir/impgen $dir/$soname > $output_objdir/$soname-def'
+
+ old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
+
+ # cygwin and mingw dlls have different entry points and sets of symbols
+ # to exclude.
+ # FIXME: what about values for MSVC?
+ dll_entry=__cygwin_dll_entry at 12
+ dll_exclude_symbols=DllMain at 12,_cygwin_dll_entry at 12,_cygwin_noncygwin_dll_entry at 12~
+ case "$host_os" in
+ mingw*)
+ # mingw values
+ dll_entry=_DllMainCRTStartup at 12
+ dll_exclude_symbols=DllMain at 12,DllMainCRTStartup at 12,DllEntryPoint at 12~
+ ;;
+ esac
+
+ # mingw and cygwin differ, and it's simplest to just exclude the union
+ # of the two symbol sets.
+ dll_exclude_symbols=DllMain at 12,_cygwin_dll_entry at 12,_cygwin_noncygwin_dll_entry at 12,DllMainCRTStartup at 12,DllEntryPoint at 12
+
+ # recent cygwin and mingw systems supply a stub DllMain which the user
+ # can override, but on older systems we have to supply one (in ltdll.c)
+ if test "x$lt_cv_need_dllmain" = "xyes"; then
+ ltdll_obj='$output_objdir/$soname-ltdll.'"$objext "
+ ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/$soname-ltdll.c~
+ test -f $output_objdir/$soname-ltdll.$objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
+ else
+ ltdll_obj=
+ ltdll_cmds=
+ fi
+
+ # Extract the symbol export list from an `--export-all' def file,
+ # then regenerate the def file from the symbol export list, so that
+ # the compiled dll only exports the symbol export list.
+ # Be careful not to strip the DATA tag left be newer dlltools.
+ export_symbols_cmds="$ltdll_cmds"'
+ $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
+ sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
+
+ # If DATA tags from a recent dlltool are present, honour them!
+ archive_expsym_cmds='echo EXPORTS > $output_objdir/$soname-def~
+ _lt_hint=1;
+ cat $export_symbols | while read symbol; do
+ set dummy \$symbol;
+ case \$# in
+ 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+ *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
+ esac;
+ _lt_hint=`expr 1 + \$_lt_hint`;
+ done~
+ '"$ltdll_cmds"'
+ $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $lib '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
+ $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $lib '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
+ $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $lib '$ltdll_obj'$libobjs $deplibs $compiler_flags'
+ ;;
+
+ darwin*|rhapsody*)
+ allow_undefined_flag='-undefined warning'
+ archive_cmds='$CC $(if test "$module" = "yes"; then echo -bundle; else
+ echo -dynamiclib; fi) -o $lib $libobjs $deplibs $linkopts'
+ archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
+ ## What we need is to hardcode the path to the library, not the search path
+ #hardcode_direct=yes
+ #hardcode_libdir_flag_spec='-install_name $libdir/$lib'
+ hardcode_shlibpath_var=no
+ whole_archive_flag_spec='-all_load'
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris* | sysv5*)
+ if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+ elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ case "$host_os" in
+ freebsd*)
+ skip_need_lc_check=yes
+ ;;
+ esac
+
+ if test "$ld_shlibs" = yes; then
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ case $host_os in
+ cygwin* | mingw*)
+ # dlltool doesn't understand --whole-archive et. al.
+ whole_archive_flag_spec=
+ ;;
+ *)
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ ;;
+ esac
+ fi
+else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case "$host_os" in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$with_gcc" = yes && test -z "$link_static_flag"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ # this was the old aix4 code, Reza Arbab says, it isn't working anymore (MM)
+ #aix4*)
+ # hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib'
+ # hardcode_libdir_separator=':'
+ # if test "$with_gcc" = yes; then
+ # collect2name=`${CC} -print-prog-name=collect2`
+ # if test -f "$collect2name" && \
+ # strings "$collect2name" | grep resolve_lib_name >/dev/null
+ # then
+ # # We have reworked collect2
+ # hardcode_direct=yes
+ # else
+ # # We have old collect2
+ # hardcode_direct=unsupported
+ # # It fails to find uninstalled libraries when the uninstalled
+ # # path is not listed in the libpath. Setting hardcode_minus_L
+ # # to unsupported forces relinking
+ # hardcode_minus_L=yes
+ # hardcode_libdir_flag_spec='-L$libdir'
+ # hardcode_libdir_separator=
+ # fi
+ # shared_flag='-shared'
+ # else
+ # shared_flag='${wl}-bM:SRE'
+ # hardcode_direct=yes
+ # fi
+ # allow_undefined_flag=' ${wl}-berok'
+ # archive_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}'
+ # archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}'
+ # case "$host_os" in aix4.[01]|aix4.[01].*)
+ # # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on
+ # always_export_symbols=yes ;;
+ # esac
+ #;;
+
+ aix4*)
+ if test "$with_gcc" = yes; then
+ # GNU compiler
+ archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-G -o $lib'
+ archive_expsym_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-G ${wl}-bE:$export_symbols -o $lib'
+ else
+ # IBM compiler (xlc). Anything older than Visual Age C 5.0 probably won't work.
+ archive_cmds='$CC -qmkshrobj $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-G -o $lib'
+ archive_expsym_cmds='$CC -qmkshrobj $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-G ${wl}-bE:$export_symbols -o $lib'
+ fi
+
+ hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
+ hardcode_libdir_separator=':'
+ hardcode_direct=unsupported
+ link_all_deplibs=yes
+ ;;
+
+ amigaos*)
+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+
+ cygwin* | mingw*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+ fix_srcfile_path='`cygpath -w "$srcfile"`'
+ ;;
+
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd*)
+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ skip_need_lc_check=yes
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ case "$host_os" in
+ hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
+ *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
+ esac
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_minus_L=yes # Not in the search PATH, but as the default
+ # location of the library.
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ irix5* | irix6*)
+ if test "$with_gcc" = yes; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ else
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ link_all_deplibs=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ openbsd*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$with_gcc" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$with_gcc" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+ fi
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ sco3.2v5*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z text'
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case "$host_os" in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv5*)
+ no_undefined_flag=' -z text'
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ hardcode_libdir_flag_spec=
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4.2uw2*)
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=no
+ hardcode_runpath_var=yes
+ runpath_var=LD_RUN_PATH
+ ;;
+
+ unixware7*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+
+## Compiler Characteristics: PIC flags, static flags, etc
+if test "X${ac_cv_prog_cc_pic+set}" = Xset; then
+ :
+else
+ ac_cv_prog_cc_pic=
+ ac_cv_prog_cc_shlib=
+ ac_cv_prog_cc_wl=
+ ac_cv_prog_cc_static=
+ ac_cv_prog_cc_no_builtin=
+ ac_cv_prog_cc_can_build_shared=$can_build_shared
+
+ if test "$with_gcc" = yes; then
+ ac_cv_prog_cc_wl='-Wl,'
+ ac_cv_prog_cc_static='-static'
+
+ case "$host_os" in
+ beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ aix*)
+ # Below there is a dirty hack to force normal static linking with -ldl
+ # The problem is because libdl dynamically linked with both libc and
+ # libC (AIX C++ library), which obviously doesn't included in libraries
+ # list by gcc. This cause undefined symbols with -static flags.
+ # This hack allows C programs to be linked with "-static -ldl", but
+ # we not sure about C++ programs.
+ ac_cv_prog_cc_static="$ac_cv_prog_cc_static ${ac_cv_prog_cc_wl}-lC"
+ ;;
+ cygwin* | mingw* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ ac_cv_prog_cc_pic='-DDLL_EXPORT'
+ ;;
+ amigaos*)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ ac_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ ac_cv_prog_cc_pic=-Kconform_pic
+ fi
+ ;;
+ *)
+ ac_cv_prog_cc_pic='-fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for PIC flags for the system compiler.
+ case "$host_os" in
+ aix3* | aix4*)
+ # All AIX code is PIC.
+ ac_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ # Is there a better ac_cv_prog_cc_static that works with the bundled CC?
+ ac_cv_prog_cc_wl='-Wl,'
+ ac_cv_prog_cc_static="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+ ac_cv_prog_cc_pic='+Z'
+ ;;
+
+ irix5* | irix6*)
+ ac_cv_prog_cc_wl='-Wl,'
+ ac_cv_prog_cc_static='-non_shared'
+ # PIC (with -KPIC) is the default.
+ ;;
+
+ cygwin* | mingw* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ ac_cv_prog_cc_pic='-DDLL_EXPORT'
+ ;;
+
+ newsos6)
+ ac_cv_prog_cc_pic='-KPIC'
+ ac_cv_prog_cc_static='-Bstatic'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ # All OSF/1 code is PIC.
+ ac_cv_prog_cc_wl='-Wl,'
+ ac_cv_prog_cc_static='-non_shared'
+ ;;
+
+ sco3.2v5*)
+ ac_cv_prog_cc_pic='-Kpic'
+ ac_cv_prog_cc_static='-dn'
+ ac_cv_prog_cc_shlib='-belf'
+ ;;
+
+ solaris*)
+ ac_cv_prog_cc_pic='-KPIC'
+ ac_cv_prog_cc_static='-Bstatic'
+ ac_cv_prog_cc_wl='-Wl,'
+ ;;
+
+ sunos4*)
+ ac_cv_prog_cc_pic='-PIC'
+ ac_cv_prog_cc_static='-Bstatic'
+ ac_cv_prog_cc_wl='-Qoption ld '
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ ac_cv_prog_cc_pic='-KPIC'
+ ac_cv_prog_cc_static='-Bstatic'
+ ac_cv_prog_cc_wl='-Wl,'
+ ;;
+
+ uts4*)
+ ac_cv_prog_cc_pic='-pic'
+ ac_cv_prog_cc_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ ac_cv_prog_cc_pic='-Kconform_pic'
+ ac_cv_prog_cc_static='-Bstatic'
+ fi
+ ;;
+
+ *)
+ ac_cv_prog_cc_can_build_shared=no
+ ;;
+ esac
+ fi
+ ac_cv_prog_cc_pic="$ac_cv_prog_cc_pic -DPIC"
+fi
+
+need_lc=yes
+if test "$enable_shared" = yes && test "$with_gcc" = yes; then
+ case "$archive_cmds" in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ echo $ac_n "checking whether -lc should be explicitly linked in... $ac_c" 1>&6
+ if eval "test \"`echo '$''{'ac_cv_archive_cmds_needs_lc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+ need_lc=$ac_cv_archive_cmds_needs_lc
+ elif test "x$skip_need_lc_check" = "xyes" ; then
+ echo $ac_n "(skipping, using no) $ac_c" 1>&6
+ need_lc=no
+ else
+ $rm conftest*
+ echo "static int dummy;" > conftest.$ac_ext
+ if { (eval echo ltcf-c.sh:need_lc: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
+ # Append any warnings to the config.log.
+ cat conftest.err 1>&5
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$ac_cv_prog_cc_wl
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { (eval echo ltcf-c.sh:need_lc: \"$archive_cmds\") 1>&5; (eval $archive_cmds) 2>&1 | grep " -lc " 1>&5 ; }; then
+ need_lc=no
+ fi
+ allow_undefined_flag=$save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ fi
+ $rm conftest*
+ echo "$ac_t$need_lc" 1>&6
+ ;;
+ esac
+fi
+ac_cv_archive_cmds_needs_lc=$need_lc
Added: kde-extras/kfocus/branches/upstream/current/admin/ltcf-cxx.sh
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/ltcf-cxx.sh 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/ltcf-cxx.sh 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,962 @@
+#### This script is meant to be sourced by ltconfig.
+
+# $Id: ltcf-cxx.sh,v 1.1.1.1 2001/08/28 19:09:08 wehjin Exp $
+
+# ltcf-cxx.sh - Create a C++ compiler specific configuration
+#
+# Copyright (C) 1996-1999,2000 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+#
+# Original C++ support by:
+# Alexandre Oliva <oliva at lsd.ic.unicamp.br>
+# Ossama Othman <ossama at debian.org>
+# Thomas Thanner <tanner at gmx.de>
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Source file extension for C++ test sources.
+ac_ext=cc
+
+# Object file extension for compiled C++ test sources.
+objext=o
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *[]) { return (0); }'
+
+# C++ compiler
+CXX=${CXX-c++}
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+CC=${CC-"$CXX"}
+CFLAGS=${CFLAGS-"$CXXFLAGS"}
+
+# Allow CC (or CXX) to be a program name with arguments.
+set dummy $CC
+compiler=$2
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+
+# we are optimistic. (Too optimistic if you ask me, down there we switch it
+# off again for most platforms ;) (MM)
+ld_shlibs=yes
+
+# Check if we are using GNU gcc (taken/adapted from configure script)
+# We need to check here since "--with-gcc" is set at configure time,
+# not ltconfig time!
+cat > conftest.$ac_ext <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-c++} -E conftest.$ac_ext'; { (eval echo \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ with_gcc=yes
+
+ # Set up default GNU C++ configuration
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if eval "`$CC -print-prog-name=ld` --version 2>&1" | \
+ egrep 'GNU ld' > /dev/null; then
+ with_gnu_ld=yes
+
+ archive_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+ egrep 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmds='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
+
+else
+ with_gcc=no
+ with_gnu_ld=no
+ wlarc=
+fi
+
+echo "ltcf-cxx: with_gcc=$with_gcc ; with_gnu_ld=$with_gnu_ld"
+
+# In general, the C++ compiler should always link C++ objects.
+LD="$CC"
+LDFLAGS="$LDFLAGS"
+
+# PORTME: fill in a description of your system's C++ link characteristics
+case "$host_os" in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ aix4*)
+ case "$cc_basename" in
+ xlC)
+ # IBM C++ compiler (xlC). Anything older than Visual Age C++ 5.0 probably won't work.
+ archive_cmds='$CC -qmkshrobj $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-G -o $lib'
+ archive_expsym_cmds='$CC -qmkshrobj $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-G ${wl}-bE:$export_symbols -o $lib'
+ ;;
+ *)
+ if test "$with_gcc" = yes; then
+ # GNU C++ compiler
+ archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-G -o $lib'
+ archive_expsym_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-G ${wl}-bE:$export_symbols -o $lib'
+ fi
+ ;;
+ esac
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+ hardcode_libdir_separator=':'
+ hardcode_direct=unsupported
+ link_all_deplibs=yes
+ ;;
+ chorus*)
+ case "$cc_basename" in
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ esac
+ ;;
+ dgux*)
+ case "$cc_basename" in
+ ec++)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ ghcx)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ esac
+ ;;
+ freebsd*)
+ # FreeBSD uses GNU C++ and GNU ld
+ skip_need_lc_check=yes
+ remove_lgcc=yes
+ ;;
+ hpux*)
+ case "$cc_basename" in
+ CC)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ aCC)
+ case "$host_os" in
+ hpux9*) archive_cmds='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
+ *) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;;
+ esac
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_minus_L=yes # Not in the search PATH, but as the default
+ # location of the library.
+ export_dynamic_flag_spec='${wl}-E'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmds='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+ ;;
+ *)
+ if test "$with_gcc" = yes && test "$with_gnu_ld" = no ; then
+ # MM: for HP-UX and g++ -fPIC is needed to link pic objects together
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ export_dynamic_flag_spec='${wl}-E'
+ output_verbose_link_cmds='$CC -shared -fPIC $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
+ remove_lgcc=yes
+ fi
+ if test "$with_gcc" = no ; then
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+ irix5* | irix6*)
+ case "$cc_basename" in
+ CC)
+ # SGI C++
+ archive_cmds='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$with_gcc" = yes; then
+ if test "$with_gnu_ld" = no; then
+ archive_cmds='$CC -nostdlib -D_LANGUAGE_C_CPLUS_PLUS -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ else
+ archive_cmds='$LD -shared $predep_objects $libobjs $deplibs $postdep_objects $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
+ fi
+ fi
+ ;;
+ esac
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ link_all_deplibs=yes
+ ;;
+ linux*)
+ case "$cc_basename" in
+ KCC)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ archive_expsym_cmds='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmds='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+ hardcode_libdir_flag_spec='${wl}--rpath,$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ old_archive_cmds='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ cxx)
+ # Compaq C++
+ archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ hardcode_libdir_separator=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmds='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+ ;;
+ insure)
+ if test "$with_gcc" = yes; then
+ # Insure++ together with gcc probably means also GNU ld
+ # only -whole-archive isn't supported
+ whole_archive_flag_spec=""
+ # and we can't use -nostdlib, because bloody insure has no way to
+ # output the linkline (-Zvm isn't working as documented), so we don't
+ # know the depending libs. So we hope, insure gets it right anyway.
+ archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ output_verbose_link_cmds=""
+ fi
+ esac
+ ;;
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ m88k*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ mvs*)
+ case "$cc_basename" in
+ cxx)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ esac
+ ;;
+ netbsd*)
+ if test "$with_gcc" = no || test "$with_gnu_ld" = no; then
+ # This should only be triggered for NetBSD/a.out
+ # Add in C++ constructor/destructor support
+ if test -f /usr/pkg/lib/c++rt0/c++rt0.o.PIC; then
+ cppopts="/usr/pkg/lib/c++rt0/c++rt0.o.PIC"
+ elif test -f /usr/lib/c++rt0.o; then
+ cppopts="/usr/lib/c++rt0.o"
+ fi
+ archive_cmds='ld -Bshareable -o $lib '"$cppopts"' $libobjs $deplibs $linkopts'
+ fi
+ ;;
+ openbsd*)
+ if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then
+ # MM: OpenBSD 2.7 uses G++, but not GNU ld
+ archive_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ archive_expsym_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ old_archive_cmds="$old_archive_cmds~"'$RANLIB $oldlib'
+ hardcode_libdir_flag_spec='${wl}-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ whole_archive_flag_spec='${wl}-Bforcearchive'
+ remove_lgcc=yes
+ fi
+ ;;
+ osf3*)
+ if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmds='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
+ else
+ case "$cc_basename" in
+ KCC)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ hardcode_libdir_separator=:
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ old_archive_cmds='$CC -Bstatic -o $oldlib $oldobjs'
+
+ ;;
+ RCC)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ cxx)
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmds='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ esac
+ fi
+ ;;
+ osf4* | osf5*)
+ if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then
+ allow_undefined_flag=' -Wl,-expect_unresolved -Wl,\*'
+ no_undefined_flag=' -Wl,-expect_unresolved -Wl,\*'
+ archive_cmds='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmds='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
+ else
+ case "$cc_basename" in
+ KCC)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ hardcode_libdir_separator=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ old_archive_cmds='$CC -o $oldlib $oldobjs'
+ ;;
+ RCC)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ cxx)
+ allow_undefined_flag=' -Wl,-expect_unresolved -Wl,\*'
+ no_undefined_flag=' -Wl,-expect_unresolved -Wl,\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ hardcode_libdir_separator=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmds='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ esac
+ fi
+ ;;
+ psos*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ sco*)
+ case "$cc_basename" in
+ CC)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case "$cc_basename" in
+ CC)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ lcc)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ esac
+ ;;
+ solaris*)
+ case "$cc_basename" in
+ CC)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ no_undefined_flag=' -ztext'
+ archive_cmds='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case "$host_os" in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The C++ compiler is used as linker so we must use $wl
+ # flag to pass the commands to the underlying system
+ # linker.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ link_all_deplibs=yes
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmds='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx)
+ # Green Hills C++ Compiler
+ archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ old_archive_cmds='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then
+ if $CC --version | egrep -v '^2\.7' > /dev/null; then
+ archive_cmds='$LD -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname~$rm $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmds="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ archive_cmds='$LD -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname~$rm $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmds="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
+ fi
+
+ hardcode_libdir_flag_spec='${wl}-R $wl$libdir'
+ fi
+ ;;
+ esac
+ ;;
+ tandem*)
+ case "$cc_basename" in
+ NCC)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ esac
+ ;;
+ unixware*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs=no
+ ;;
+esac
+
+
+## Compiler Characteristics: PIC flags, static flags, etc
+
+# We don't use cached values here since only the C compiler
+# characteristics should be cached.
+ac_cv_prog_cc_pic=
+ac_cv_prog_cc_shlib=
+ac_cv_prog_cc_wl=
+ac_cv_prog_cc_static=
+ac_cv_prog_cc_no_builtin=
+ac_cv_prog_cc_can_build_shared=$can_build_shared
+
+# It is not enough to reset these cached values, they must be unset.
+unset ac_cv_prog_cc_pic_works
+unset ac_cv_prog_cc_static_works
+
+if test "$with_gcc" = yes; then
+ ac_cv_prog_cc_wl='-Wl,'
+ ac_cv_prog_cc_static='-static'
+
+ case "$host_os" in
+ beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ aix*)
+ # Below there is a dirty hack to force normal static linking with -ldl
+ # The problem is because libdl dynamically linked with both libc and
+ # libC (AIX C++ library), which obviously doesn't included in libraries
+ # list by gcc. This cause undefined symbols with -static flags.
+ # This hack allows C programs to be linked with "-static -ldl", but
+ # we not sure about C++ programs.
+ ac_cv_prog_cc_static="$ac_cv_prog_cc_static ${ac_cv_prog_cc_wl}-lC"
+ ;;
+ cygwin* | mingw* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ ac_cv_prog_cc_pic='-DDLL_EXPORT'
+ ;;
+ amigaos*)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ ac_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ ac_cv_prog_cc_pic=-Kconform_pic
+ fi
+ ;;
+ *)
+ ac_cv_prog_cc_pic='-fPIC'
+ ;;
+ esac
+else
+ case "$host_os" in
+ aix4*)
+ # All AIX code is PIC.
+ ;;
+ chorus*)
+ case "$cc_basename" in
+ cxch68)
+ # Green Hills C++ Compiler
+ # ac_cv_prog_cc_static="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ dgux*)
+ case "$cc_basename" in
+ ec++)
+ ac_cv_prog_cc_pic='-KPIC'
+ ;;
+ ghcx)
+ # Green Hills C++ Compiler
+ ac_cv_prog_cc_pic='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case "$cc_basename" in
+ CC)
+ ac_cv_prog_cc_wl='-Wl,'
+ ac_cv_prog_cc_static="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+ ac_cv_prog_cc_pic='+Z'
+ ;;
+ aCC)
+ ac_cv_prog_cc_wl='-Wl,'
+ ac_cv_prog_cc_static="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+ ac_cv_prog_cc_pic='+Z'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ irix5* | irix6*)
+ case "$cc_basename" in
+ CC)
+ ac_cv_prog_cc_wl='-Wl,'
+ ac_cv_prog_cc_static='-non_shared'
+ ac_cv_prog_cc_pic='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux*)
+ case "$cc_basename" in
+ KCC)
+ # KAI C++ Compiler
+ ac_cv_prog_cc_wl='--backend -Wl,'
+ ac_cv_prog_cc_pic='-fPIC'
+ ;;
+ cxx)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ ac_cv_prog_cc_pic=
+ ac_cv_prog_cc_static='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case "$cc_basename" in
+ cxx)
+ ac_cv_prog_cc_pic='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd*)
+ ;;
+ osf3* | osf4* | osf5*)
+ case "$cc_basename" in
+ KCC)
+ ac_cv_prog_cc_wl='--backend -Wl,'
+ ;;
+ RCC)
+ # Rational C++ 2.4.1
+ ac_cv_prog_cc_pic='-pic'
+ ;;
+ cxx)
+ # Digital/Compaq C++
+ ac_cv_prog_cc_wl='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ ac_cv_prog_cc_pic=
+ ac_cv_prog_cc_static='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ sco*)
+ case "$cc_basename" in
+ CC)
+ ac_cv_prog_cc_pic='-fPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ solaris*)
+ case "$cc_basename" in
+ CC)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ ac_cv_prog_cc_pic='-KPIC'
+ ac_cv_prog_cc_static='-Bstatic'
+ ac_cv_prog_cc_wl='-Qoption ld '
+ ;;
+ gcx)
+ # Green Hills C++ Compiler
+ ac_cv_prog_cc_pic='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case "$cc_basename" in
+ CC)
+ # Sun C++ 4.x
+ ac_cv_prog_cc_pic='-pic'
+ ac_cv_prog_cc_static='-Bstatic'
+ ;;
+ lcc)
+ # Lucid
+ ac_cv_prog_cc_pic='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ tandem*)
+ case "$cc_basename" in
+ NCC)
+ # NonStop-UX NCC 3.20
+ ac_cv_prog_cc_pic='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ unixware*)
+ ;;
+ vxworks*)
+ ;;
+ *)
+ ac_cv_prog_cc_can_build_shared=no
+ ;;
+ esac
+fi
+ac_cv_prog_cc_pic="$ac_cv_prog_cc_pic -DPIC"
+
+
+# Figure out "hidden" C++ library dependencies from verbose
+# compiler output whening linking a shared library.
+cat > conftest.$ac_ext <<EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+EOF
+
+
+if (eval $ac_compile) 2>&5; then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval $output_verbose_link_cmds`; do
+
+ case $p in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" \
+ || test $p = "-R"; then
+ prev=$p
+ continue
+ else
+ prev=
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ case $p in
+ -L* | -R*)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$compiler_lib_search_path"; then
+ compiler_lib_search_path="${prev}${p}"
+ else
+ compiler_lib_search_path="${compiler_lib_search_path} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ add="${prev}${p}"
+ if test "x$remove_lgcc" = "xyes" ; then
+ case "$add" in
+ -lgcc ) add="" ;;
+ esac
+ fi
+ if test -n "$add" ; then
+ if test -z "$postdeps"; then
+ postdeps="$add"
+ else
+ postdeps="${postdeps} ${add}"
+ fi
+ fi
+ fi
+ ;;
+
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$predep_objects"; then
+ predep_objects="$p"
+ else
+ predep_objects="$predep_objects $p"
+ fi
+ else
+ if test -z "$postdep_objects"; then
+ postdep_objects="$p"
+ else
+ postdep_objects="$postdep_objects $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out
+else
+ echo "ltcf-cxx.sh: error: problem compiling test program"
+fi
+
+$rm -f confest.$objext
+
+if test "x$skip_need_lc_check" = "xyes" ; then
+ need_lc=no
+else
+ case " $postdeps " in
+ *" -lc "*) need_lc=no ;;
+ *) need_lc=yes ;;
+ esac
+fi
Added: kde-extras/kfocus/branches/upstream/current/admin/ltcf-gcj.sh
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/ltcf-gcj.sh 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/ltcf-gcj.sh 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,623 @@
+#### This script is meant to be sourced by ltconfig.
+
+# ltcf-gcj.sh - Create a GCJ compiler specific configuration
+#
+# Copyright (C) 1996-1999, 2000, 2001 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+#
+# Original GCJ support by:
+# Alexandre Oliva <oliva at lsd.ic.unicamp.br>
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
+
+## Linker Characteristics
+case "$host_os" in
+cygwin* | mingw*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$with_gcc" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # See if GNU ld supports shared libraries.
+ case "$host_os" in
+ aix3* | aix4*)
+ # On AIX, the GNU linker is very broken
+ ld_shlibs=no
+ cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+ ;;
+
+ amigaos*)
+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+
+ # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we can use
+ # them.
+ ld_shlibs=no
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+
+ extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
+ sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/impgen.c~
+ test -f $output_objdir/impgen.exe || (cd $output_objdir && \
+ if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
+ else $CC -o impgen impgen.c ; fi)~
+ $output_objdir/impgen $dir/$soname > $output_objdir/$soname-def'
+
+ old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
+
+ # cygwin and mingw dlls have different entry points and sets of symbols
+ # to exclude.
+ # FIXME: what about values for MSVC?
+ dll_entry=__cygwin_dll_entry at 12
+ dll_exclude_symbols=DllMain at 12,_cygwin_dll_entry at 12,_cygwin_noncygwin_dll_entry at 12~
+ case "$host_os" in
+ mingw*)
+ # mingw values
+ dll_entry=_DllMainCRTStartup at 12
+ dll_exclude_symbols=DllMain at 12,DllMainCRTStartup at 12,DllEntryPoint at 12~
+ ;;
+ esac
+
+ # mingw and cygwin differ, and it's simplest to just exclude the union
+ # of the two symbol sets.
+ dll_exclude_symbols=DllMain at 12,_cygwin_dll_entry at 12,_cygwin_noncygwin_dll_entry at 12,DllMainCRTStartup at 12,DllEntryPoint at 12
+
+ # recent cygwin and mingw systems supply a stub DllMain which the user
+ # can override, but on older systems we have to supply one (in ltdll.c)
+ if test "x$lt_cv_need_dllmain" = "xyes"; then
+ ltdll_obj='$output_objdir/$soname-ltdll.'"$objext "
+ ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/$soname-ltdll.c~
+ test -f $output_objdir/$soname-ltdll.$objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
+ else
+ ltdll_obj=
+ ltdll_cmds=
+ fi
+
+ # Extract the symbol export list from an `--export-all' def file,
+ # then regenerate the def file from the symbol export list, so that
+ # the compiled dll only exports the symbol export list.
+ # Be careful not to strip the DATA tag left be newer dlltools.
+ export_symbols_cmds="$ltdll_cmds"'
+ $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
+ sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
+
+ # If DATA tags from a recent dlltool are present, honour them!
+ archive_expsym_cmds='echo EXPORTS > $output_objdir/$soname-def~
+ _lt_hint=1;
+ cat $export_symbols | while read symbol; do
+ set dummy \$symbol;
+ case \$# in
+ 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+ *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
+ esac;
+ _lt_hint=`expr 1 + \$_lt_hint`;
+ done~
+ '"$ltdll_cmds"'
+ $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_gcj_dll_switch' -Wl,-e,'$dll_entry' -o $lib '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
+ $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_gcj_dll_switch' -Wl,-e,'$dll_entry' -o $lib '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
+ $CC $output_objdir/$soname-exp '$lt_cv_gcj_dll_switch' -Wl,-e,'$dll_entry' -o $lib '$ltdll_obj'$libobjs $deplibs $compiler_flags'
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris* | sysv5*)
+ if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+ elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = yes; then
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ case $host_os in
+ cygwin* | mingw*)
+ # dlltool doesn't understand --whole-archive et. al.
+ whole_archive_flag_spec=
+ ;;
+ *)
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ ;;
+ esac
+ fi
+else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case "$host_os" in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$with_gcc" = yes && test -z "$link_static_flag"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix4* | aix5*)
+ hardcode_direct=yes
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+ if test "$with_gcc" = yes; then
+ case "$host_os" in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ hardcode_direct=yes
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ esac
+ shared_flag='-shared'
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # Test if we are trying to use run time linking, or normal AIX style linking.
+ # If -brtl is somewhere in LDFLAGS, we need to do run time linking.
+ aix_use_runtimelinking=no
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+ # -bexpall does not export symbols beginning with underscore (_)
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other run time loading flags (-brtl), -berok will
+ # link without error, but may produce a broken library.
+ allow_undefined_flag=' ${wl}-berok'
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+ else
+ allow_undefined_flag=' ${wl}-berok'
+ # -bexpall does not export symbols beginning with underscore (_)
+ always_export_symbols=yes
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec=' '
+ build_libtool_need_lc=yes
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+ # This is similar to how AIX traditionally builds it's shared libraries.
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+
+ cygwin* | mingw*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+ fix_srcfile_path='`cygpath -w "$srcfile"`'
+ ;;
+
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd*)
+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ case "$host_os" in
+ hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
+ *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
+ esac
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_minus_L=yes # Not in the search PATH, but as the default
+ # location of the library.
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ irix5* | irix6*)
+ if test "$with_gcc" = yes; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ else
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ link_all_deplibs=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='${wl}-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ openbsd*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$with_gcc" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$with_gcc" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ sco3.2v5*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z text'
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case "$host_os" in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv5*)
+ no_undefined_flag=' -z text'
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ hardcode_libdir_flag_spec=
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4.2uw2*)
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=no
+ hardcode_runpath_var=yes
+ runpath_var=LD_RUN_PATH
+ ;;
+
+ unixware7*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+
+## Compiler Characteristics: PIC flags, static flags, etc
+
+# We don't use cached values here since only the C compiler
+# characteristics should be cached.
+ ac_cv_prog_cc_pic=
+ ac_cv_prog_cc_shlib=
+ ac_cv_prog_cc_wl=
+ ac_cv_prog_cc_static=
+ ac_cv_prog_cc_no_builtin=
+ ac_cv_prog_cc_can_build_shared=$can_build_shared
+
+ ac_cv_prog_cc_wl='-Wl,'
+ ac_cv_prog_cc_static='-static'
+
+ case "$host_os" in
+ beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ aix*)
+ # Below there is a dirty hack to force normal static linking with -ldl
+ # The problem is because libdl dynamically linked with both libc and
+ # libC (AIX C++ library), which obviously doesn't included in libraries
+ # list by gcc. This cause undefined symbols with -static flags.
+ # This hack allows C programs to be linked with "-static -ldl", but
+ # we not sure about C++ programs.
+ ac_cv_prog_cc_static="$ac_cv_prog_cc_static ${ac_cv_prog_cc_wl}-lC"
+ ;;
+ cygwin* | mingw* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ ac_cv_prog_cc_pic='-DDLL_EXPORT'
+ ;;
+ amigaos*)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ ac_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ ac_cv_prog_cc_pic=-Kconform_pic
+ fi
+ ;;
+ *)
+ ac_cv_prog_cc_pic='-fPIC'
+ ;;
+ esac
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+need_lc=no
Added: kde-extras/kfocus/branches/upstream/current/admin/ltconfig
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/ltconfig 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/ltconfig 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,2697 @@
+#! /bin/sh
+
+# ltconfig - Create a system-specific libtool.
+# Copyright (C) 1996-2000 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A lot of this script is taken from autoconf-2.10.
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+echo=echo
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+ # Yippee, $echo works!
+ :
+else
+ # Restart under the correct shell.
+ exec "$SHELL" "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit 0
+fi
+
+# Find the correct PATH separator. Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+ UNAME=${UNAME-`uname 2>/dev/null`}
+ case X$UNAME in
+ *-DOS) PATH_SEPARATOR=';' ;;
+ *) PATH_SEPARATOR=':' ;;
+ esac
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test "X${echo_test_string+set}" != Xset; then
+ # find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+ echo_test_string="`eval $cmd`" &&
+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then
+ break
+ fi
+ done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+ for dir in $PATH /usr/ucb; do
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ echo="$dir/echo"
+ break
+ fi
+ done
+ IFS="$save_ifs"
+
+ if test "X$echo" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ echo='print -r'
+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running ltconfig again with it.
+ ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
+ else
+ # Try using printf.
+ echo='printf %s\n'
+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ echo="$CONFIG_SHELL $0 --fallback-echo"
+ elif echo_testing_string=`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ echo="$CONFIG_SHELL $0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
+
+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then
+ break
+ fi
+ prev="$cmd"
+ done
+
+ if test "$prev" != 'sed 50q "$0"'; then
+ echo_test_string=`eval $prev`
+
+ export echo_test_string
+ exec "${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}}" "$0" ${1+"$@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ echo=echo
+ fi
+ fi
+ fi
+ fi
+fi
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# The name of this program.
+progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
+
+# Constants:
+PROGRAM=ltconfig
+PACKAGE=libtool
+VERSION=1.4a
+TIMESTAMP=" (1.641.2.179mm 2001/01/08 01:59:19)"
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+rm="rm -f"
+
+help="Try \`$progname --help' for more information."
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+enable_shared=yes
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+enable_static=yes
+enable_fast_install=yes
+enable_dlopen=unknown
+enable_win32_dll=no
+pic_mode=default
+ltmain=
+silent=
+srcdir=
+ac_config_guess=
+ac_config_sub=
+host=
+build=NONE
+nonopt=NONE
+ofile="$default_ofile"
+verify_host=yes
+tagname=
+with_gcc=no
+with_gnu_ld=no
+need_locks=yes
+ac_ext=c
+libext=a
+cache_file=
+
+## Dependencies to place before and after the object being linked:
+predep_objects=
+postdep_objects=
+predeps=
+postdeps=
+compiler_lib_search_path=
+
+## Link characteristics:
+allow_undefined_flag=
+no_undefined_flag=
+need_lib_prefix=unknown
+need_version=unknown
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+archive_cmds=
+archive_expsym_cmds=
+old_archive_from_new_cmds=
+old_archive_from_expsyms_cmds=
+striplib=
+old_striplib=
+export_dynamic_flag_spec=
+whole_archive_flag_spec=
+thread_safe_flag_spec=
+hardcode_into_libs=no
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+hardcode_shlibpath_var=unsupported
+runpath_var=
+link_all_deplibs=unknown
+always_export_symbols=no
+export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# include_expsyms should be a list of space-separated symbols to be *always*
+# included in the symbol list
+include_expsyms=
+# exclude_expsyms can be an egrep regular expression of symbols to exclude
+# it will be wrapped by ` (' and `)$', so one must not match beginning or
+# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+# as well as any symbol that contains `d'.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced. Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
+extract_expsyms_cmds=
+
+## Tools:
+old_AR="$AR"
+old_AR_FLAGS="$AR_FLAGS"
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+old_CPPFLAGS="$CPPFLAGS"
+old_LDFLAGS="$LDFLAGS"
+old_LIBS="$LIBS"
+old_MAGIC_CMD="$MAGIC_CMD"
+old_LD="$LD"
+old_LN_S="$LN_S"
+old_LTCC="$LTCC"
+old_NM="$NM"
+old_RANLIB="$RANLIB"
+old_STRIP="$STRIP"
+old_AS="$AS"
+old_DLLTOOL="$DLLTOOL"
+old_OBJDUMP="$OBJDUMP"
+old_OBJEXT="$OBJEXT"
+old_EXEEXT="$EXEEXT"
+old_reload_flag="$reload_flag"
+old_deplibs_check_method="$deplibs_check_method"
+old_file_magic_cmd="$file_magic_cmd"
+
+# Parse the command line options.
+args=
+prev=
+for option
+do
+ case "$option" in
+ -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) optarg= ;;
+ esac
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ eval "$prev=\$option"
+ prev=
+ continue
+ fi
+
+ case "$option" in
+ --help) cat <<EOM
+Usage: $progname [OPTION]... LTMAIN [HOST]
+
+Generate a system-specific libtool script.
+
+ --build configure for building on BUILD [BUILD=HOST]
+ --debug enable verbose shell tracing
+ --disable-shared do not build shared libraries
+ --disable-static do not build static libraries
+ --disable-fast-install do not optimize for fast installation
+ --enable-dlopen enable dlopen support
+ --enable-win32-dll enable building dlls on win32 hosts
+ --help display this help and exit
+ --no-verify do not verify that HOST is a valid host type
+-o, --output=FILE specify the output file [default=$default_ofile]
+ --quiet same as \`--silent'
+ --silent do not print informational messages
+ --srcdir=DIR find \`config.guess' in DIR
+ --version output version information and exit
+ --add-tag=TAG append an alternate configuration
+ --with-gcc assume that the GNU C compiler will be used
+ --with-gnu-ld assume that the C compiler uses the GNU linker
+ --prefer-pic try to use only PIC objects
+ --prefer-non-pic try to use only non-PIC objects
+ --disable-lock disable file locking
+ --cache-file=FILE configure cache file
+
+LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program
+that provides basic libtool functionality.
+
+HOST is the canonical host system name [default=guessed].
+EOM
+ exit 0
+ ;;
+
+ --build) prev=build ;;
+ --build=*) build="$optarg" ;;
+
+ --debug)
+ echo "$progname: enabling shell trace mode"
+ set -x
+ ;;
+
+ --disable-shared) enable_shared=no ;;
+
+ --disable-static) enable_static=no ;;
+
+ --disable-fast-install) enable_fast_install=no ;;
+
+ --enable-dlopen) enable_dlopen=yes ;;
+
+ --enable-win32-dll) enable_win32_dll=yes ;;
+
+ --quiet | --silent) silent=yes ;;
+
+ --srcdir) prev=srcdir ;;
+ --srcdir=*) srcdir="$optarg" ;;
+
+ --no-verify) verify_host=no ;;
+
+ --output | -o) prev=ofile ;;
+ --output=*) ofile="$optarg" ;;
+
+ --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;
+
+ --add-tag) prev=tagname ;;
+ --add-tag=*) tagname="$optarg" ;;
+
+ --with-gcc) with_gcc=yes ;;
+ --with-gnu-ld) with_gnu_ld=yes ;;
+
+ --prefer-pic) pic_mode=yes ;;
+ --prefer-non-pic) pic_mode=no ;;
+
+ --disable-lock) need_locks=no ;;
+
+ --cache-file=*) cache_file="$optarg" ;;
+
+ -*)
+ echo "$progname: unrecognized option \`$option'" 1>&2
+ echo "$help" 1>&2
+ exit 1
+ ;;
+
+ *)
+ if test -z "$ltmain"; then
+ ltmain="$option"
+ elif test -z "$host"; then
+# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
+# if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
+# echo "$progname: warning \`$option' is not a valid host type" 1>&2
+# fi
+ host="$option"
+ else
+ echo "$progname: too many arguments" 1>&2
+ echo "$help" 1>&2
+ exit 1
+ fi ;;
+ esac
+done
+
+if test -z "$ltmain"; then
+ echo "$progname: you must specify a LTMAIN file" 1>&2
+ echo "$help" 1>&2
+ exit 1
+fi
+
+if test ! -f "$ltmain"; then
+ echo "$progname: \`$ltmain' does not exist" 1>&2
+ echo "$help" 1>&2
+ exit 1
+fi
+
+if test -n "$tagname"; then
+ # Check whether tagname contains only valid characters
+ case `$echo "X$tagname" | $Xsed -e 's/[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]//g'` in
+ "") ;;
+ *)
+ echo "$progname: invalid tag name: $tagname" 1>&2
+ exit 1
+ ;;
+ esac
+
+ if grep "^### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$ofile" > /dev/null; then
+ echo "$progname: tag name $tagname already exists" 1>&2
+ exit 1
+ fi
+
+ if test ! -f "$ofile"; then
+ echo "$progname: warning: output file \`$ofile' does not exist" 1>&2
+ fi
+
+ if test -z "$LTCC"; then
+ eval "`$SHELL $ofile --config | grep '^LTCC='`"
+ if test -z "$LTCC"; then
+ echo "$progname: warning: output file \`$ofile' does not look like a libtool script" 1>&2
+ else
+ echo "$progname: warning: using \`LTCC=$LTCC', extracted from \`$ofile'" 1>&2
+ fi
+ fi
+fi
+
+# Quote any args containing shell metacharacters.
+ltconfig_args=
+for arg
+do
+ case "$arg" in
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+ ltconfig_args="$ltconfig_args '$arg'" ;;
+ *) ltconfig_args="$ltconfig_args $arg" ;;
+ esac
+done
+
+# A relevant subset of AC_INIT.
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 5 compiler messages saved in config.log
+# 6 checking for... messages and results
+if test "$silent" = yes; then
+ exec 6>/dev/null
+else
+ exec 6>&1
+fi
+exec 5>>./config.log
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi
+if test "X${LANG+set}" = Xset; then LANG=C; export LANG; fi
+
+if test -n "$cache_file" && test -r "$cache_file" && test -f "$cache_file"; then
+ echo "loading cache $cache_file within ltconfig"
+ . $cache_file
+fi
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+ # Stardent Vistra SVR4 grep lacks -e, says ghazi at caip.rutgers.edu.
+ if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+ ac_n= ac_c='
+' ac_t=' '
+ else
+ ac_n=-n ac_c= ac_t=
+ fi
+else
+ ac_n= ac_c='\c' ac_t=
+fi
+
+if test -z "$srcdir"; then
+ # Assume the source directory is the same one as the path to LTMAIN.
+ srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`
+ test "$srcdir" = "$ltmain" && srcdir=.
+fi
+
+trap "$rm conftest*; exit 1" 1 2 15
+if test "$verify_host" = yes; then
+ # Check for config.guess and config.sub.
+ ac_aux_dir=
+ for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/config.guess; then
+ ac_aux_dir=$ac_dir
+ break
+ fi
+ done
+ if test -z "$ac_aux_dir"; then
+ echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
+ echo "$help" 1>&2
+ exit 1
+ fi
+ ac_config_guess=$ac_aux_dir/config.guess
+ ac_config_sub=$ac_aux_dir/config.sub
+
+ # Make sure we can run config.sub.
+ if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
+ else
+ echo "$progname: cannot run $ac_config_sub" 1>&2
+ echo "$help" 1>&2
+ exit 1
+ fi
+
+ echo $ac_n "checking host system type""... $ac_c" 1>&6
+
+ host_alias=$host
+ case "$host_alias" in
+ "")
+ # Force config.guess to use the C compiler.
+ # CC_FOR_BUILD overrides the CC variable in config.guess but I had
+ # problems with it so do it this way for now.
+ CC="$LTCC"
+
+ if host_alias=`$SHELL $ac_config_guess`; then :
+ else
+ echo "$progname: cannot guess host type; you must specify one" 1>&2
+ echo "$help" 1>&2
+ exit 1
+ fi
+
+ # Restore the C compiler.
+ CC="$old_CC"
+ ;;
+ esac
+ host=`$SHELL $ac_config_sub $host_alias`
+ echo "$ac_t$host" 1>&6
+
+ # Make sure the host verified.
+ test -z "$host" && exit 1
+
+ # Check for the build system type
+ echo $ac_n "checking build system type... $ac_c" 1>&6
+
+ build_alias=$build
+ case "$build_alias" in
+ NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+ esac
+
+ build=`$SHELL $ac_config_sub $build_alias`
+ build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+ build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+ build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ echo "$ac_t""$build" 1>&6
+
+elif test -z "$host"; then
+ echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
+ echo "$help" 1>&2
+ exit 1
+else
+ host_alias=$host
+ build_alias=$host_alias
+ build=$host
+fi
+
+if test x"$host" != x"$build"; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
+fi
+
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+case "$host_os" in
+linux-gnu*) ;;
+linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+esac
+
+case "$host_os" in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+ old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+fi
+
+# Source the script associated with the $tagname tag configuration.
+if test -n "$tagname"; then
+ . $ltmain
+else
+ # FIXME: We should use a variable here
+ # Configure for a C compiler
+ . $srcdir/ltcf-c.sh
+fi
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$NM" && NM=nm
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$objext" && objext=o
+
+echo $ac_n "checking for objdir... $ac_c" 1>&6
+rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+echo "$ac_t$objdir" 1>&6
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# Allow CC to be a program name with arguments.
+set dummy $CC
+compiler="$2"
+
+# We assume here that the value for ac_cv_prog_cc_pic will not be cached
+# in isolation, and that seeing it set (from the cache) indicates that
+# the associated values are set (in the cache) correctly too.
+echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
+echo "$progname:676:checking for $compiler option to produce PIC" 1>&5
+
+if test -z "$ac_cv_prog_cc_pic"; then
+ echo "$ac_t"none 1>&6
+else
+ echo "$ac_t""$ac_cv_prog_cc_pic" 1>&6
+
+ # Check to make sure the pic_flag actually works.
+ echo $ac_n "checking if $compiler PIC flag $ac_cv_prog_cc_pic works... $ac_c" 1>&6
+ echo "$progname:685:checking that $compiler PIC flag $ac_cv_prog_cc_pic works." 1>&5
+ if test "X${ac_cv_prog_cc_pic_works+set}" = Xset && \
+ test "X${ac_cv_prog_cc_pic_works}" != X; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+ else
+ ac_cv_prog_cc_pic_works=yes
+ $rm conftest*
+ echo $lt_simple_compile_test_code > conftest.$ac_ext
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $ac_cv_prog_cc_pic -DPIC"
+ if { (eval echo $progname:695: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
+ # Append any warnings to the config.log.
+ cat conftest.err 1>&5
+
+ case "$host_os" in
+ hpux9* | hpux10* | hpux11*)
+ # On HP-UX, both CC and GCC only warn that PIC is supported... then
+ # they create non-PIC objects. So, if there were any warnings, we
+ # assume that PIC is not supported.
+ if test -s conftest.err; then
+ ac_cv_prog_cc_pic_works=no
+ ac_cv_prog_cc_can_build_shared=no
+ ac_cv_prog_cc_pic=
+ else
+ ac_cv_prog_cc_pic_works=yes
+ ac_cv_prog_cc_pic=" $ac_cv_prog_cc_pic"
+ fi
+ ;;
+ *)
+ ac_cv_prog_cc_pic_works=yes
+ ac_cv_prog_cc_pic=" $ac_cv_prog_cc_pic"
+ ;;
+ esac
+ else
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ ac_cv_prog_cc_pic_works=no
+ ac_cv_prog_cc_can_build_shared=no
+ ac_cv_prog_cc_pic=
+ fi
+ CFLAGS="$save_CFLAGS"
+ $rm conftest*
+ fi
+ # Belt *and* braces to stop my trousers falling down:
+ if test "X$ac_cv_prog_cc_pic_works" = Xno; then
+ ac_cv_prog_cc_pic=
+ ac_cv_prog_cc_can_build_shared=no
+ fi
+ echo "$ac_t""$ac_cv_prog_cc_pic_works" 1>&6
+fi
+
+# Check for any special shared library compilation flags.
+if test -n "$ac_cv_prog_cc_shlib"; then
+ echo "$progname: warning: \`$CC' requires \`$ac_cv_prog_cc_shlib' to build shared libraries" 1>&2
+ if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$ac_cv_prog_cc_shlib[ ]" >/dev/null; then :
+ else
+ echo "$progname: add \`$ac_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2
+ ac_cv_prog_cc_can_build_shared=no
+ fi
+fi
+
+echo $ac_n "checking if $compiler static flag $ac_cv_prog_cc_static works... $ac_c" 1>&6
+echo "$progname:747: checking if $compiler static flag $ac_cv_prog_cc_static works" >&5
+if test "X${ac_cv_prog_cc_static_works+set}" = Xset && \
+ test "X${ac_cv_prog_cc_static_works}" != X; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ $rm conftest*
+ echo $lt_simple_link_test_code > conftest.$ac_ext
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $ac_cv_prog_cc_static"
+ if { (eval echo $progname:756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ ac_cv_prog_cc_static_works=yes
+ else
+ ac_cv_prog_cc_static_works=no
+ ac_cv_prog_cc_static=
+ fi
+ LDFLAGS="$save_LDFLAGS"
+ $rm conftest*
+fi
+# Belt *and* braces to stop my trousers falling down:
+if test "X$ac_cv_prog_cc_static_works" = Xno; then
+ ac_cv_prog_cc_static=
+fi
+echo "$ac_t""$ac_cv_prog_cc_static_works" 1>&6
+pic_flag="$ac_cv_prog_cc_pic"
+special_shlib_compile_flags="$ac_cv_prog_cc_shlib"
+wl="$ac_cv_prog_cc_wl"
+link_static_flag="$ac_cv_prog_cc_static"
+no_builtin_flag="$ac_cv_prog_cc_no_builtin"
+can_build_shared="$ac_cv_prog_cc_can_build_shared"
+
+# Check to see if options -o and -c are simultaneously supported by compiler
+echo $ac_n "checking if $compiler supports -c -o file.$objext... $ac_c" 1>&6
+$rm -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
+$rm conftest*
+echo $lt_simple_compile_test_code > conftest.$ac_ext
+mkdir out
+# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+# that will create temporary files in the current directory regardless of
+# the output directory. Thus, making CWD read-only will cause this test
+# to fail, enabling locking or at least warning the user not to do parallel
+# builds.
+chmod -w .
+save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -o out/conftest2.$objext"
+echo "$progname:793: checking if $compiler supports -c -o file.$objext" >&5
+if { (eval echo $progname:794: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$objext; then
+
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s out/conftest.err; then
+ echo "$ac_t"no 1>&6
+ compiler_c_o=no
+ else
+ echo "$ac_t"yes 1>&6
+ compiler_c_o=yes
+ fi
+else
+ # Append any errors to the config.log.
+ cat out/conftest.err 1>&5
+ compiler_c_o=no
+ echo "$ac_t"no 1>&6
+fi
+CFLAGS="$save_CFLAGS"
+chmod u+w .
+$rm conftest* out/*
+rmdir out
+cd ..
+rmdir conftest
+$rm -r conftest 2>/dev/null
+
+# Check to see if we can do hard links to lock some files if needed
+hard_links="nottested"
+if test "$compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6
+ hard_links=yes
+ $rm conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ echo "$ac_t$hard_links" 1>&6
+ $rm conftest*
+ if test "$hard_links" = no; then
+ echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+if test "$with_gcc" = yes; then
+ # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+ echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6
+ $rm conftest*
+ echo $lt_simple_compile_test_code > conftest.$ac_ext
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
+ echo "$progname:847: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+ if { (eval echo $progname:848: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
+
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ echo "$ac_t"no 1>&6
+ compiler_rtti_exceptions=no
+ else
+ echo "$ac_t"yes 1>&6
+ compiler_rtti_exceptions=yes
+ fi
+ else
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ compiler_rtti_exceptions=no
+ echo "$ac_t"no 1>&6
+ fi
+ CFLAGS="$save_CFLAGS"
+ $rm conftest*
+
+ if test "$compiler_rtti_exceptions" = "yes"; then
+ no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+ else
+ no_builtin_flag=' -fno-builtin'
+ fi
+
+fi
+
+# See if the linker supports building shared libraries.
+echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
+
+echo "$ac_t$ld_shlibs" 1>&6
+test "$ld_shlibs" = no && can_build_shared=no
+
+# Check hardcoding attributes.
+echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+ test -n "$runpath_var"; then
+
+ # We can hardcode non-existant directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$hardcode_shlibpath_var" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+echo "$ac_t$hardcode_action" 1>&6
+
+echo $ac_n "checking whether stripping libraries is possible... $ac_c" 1>&6
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ echo "${ac_t}yes" 1>&6
+else
+ echo "${ac_t}no" 1>&6
+fi
+
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+# PORTME Fill in your ld.so characteristics
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+
+echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
+case "$host_os" in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}.so$major'
+ ;;
+
+aix4*)
+ version_type=linux
+ # AIX has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ # We preserve .a as extension for shared libraries though AIX4.2
+ # and later linker supports .so
+ # (MM) we changed it to .so, as we now use runtime linking (-brtl) and this
+ # prevents people from linking it as normal .a archive
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ shlibpath_var=LIBPATH
+ # the following is may be not correct. I need to check with the source of
+ # this patch (its arbab at austin.ibm.com) (MM)
+ hardcode_into_libs=all
+ ;;
+
+amigaos*)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+ ;;
+
+beos*)
+ library_names_spec='${libname}.so'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+bsdi4*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ export_dynamic_flag_spec=-rdynamic
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32*)
+ version_type=windows
+ need_version=no
+ need_lib_prefix=no
+ if test "$with_gcc" = yes; then
+ library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
+ else
+ library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
+ fi
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+darwin* | rhapsody*)
+ library_names_spec='${libname}.`if test "$module" = "yes"; then echo so; else echo dylib; fi`'
+ need_lib_prefix=no
+ need_version=no
+ postinstall_cmds='chmod +x $lib'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ ;;
+
+freebsd1*)
+ dynamic_linker=no
+ ;;
+
+freebsd*)
+ objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+ version_type=freebsd-$objformat
+ case "$version_type" in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case "$host_os" in
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ *) # from 3.2 on
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ dynamic_linker="$host_os dld.sl"
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+ soname_spec='${libname}${release}.sl$major'
+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ postinstall_cmds='chmod 555 $lib'
+ ;;
+
+irix5* | irix6*)
+ version_type=irix
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}.so$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
+ case "$host_os" in
+ irix5*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case "$LD" in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ need_version=yes
+ else
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
+ soname_spec='${libname}${release}.so$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+openbsd*)
+ version_type=sunos
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ need_version=no
+ fi
+ library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ # OpenBSD 2.7 the overriding is needed for fast-install
+ shlibpath_overrides_runpath=yes
+ ;;
+
+os2*)
+ libname_spec='$name'
+ need_lib_prefix=no
+ library_names_spec='$libname.dll $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_version=no
+ soname_spec='${libname}${release}.so'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+sco3.2v5*)
+ version_type=osf
+ soname_spec='${libname}${release}.so$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case "$host_vendor" in
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
+ soname_spec='$libname.so.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+echo "$ac_t$dynamic_linker" 1>&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+# Define system-specific variables.
+case "$host_os" in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*) # Its linker distinguishes data from code symbols
+ global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+ ;;
+irix*)
+ symcode='[BCDEGRST]'
+ ;;
+solaris* | sysv5*)
+ symcode='[BDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# Handle CRLF in mingw too chain
+opt_cr=
+case "$host_os" in
+mingw*)
+ opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+ symcode='[ABCDGISTW]'
+fi
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Write the raw and C identifiers.
+global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+ $rm conftest*
+ cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+ echo "$progname:1326: checking if global_symbol_pipe works" >&5
+ if { (eval echo $progname:1327: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { echo "$progname:1330: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
+
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+ if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+ # Now generate the symbol file.
+ eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
+
+ cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+ sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.$ac_ext
+ cat <<\EOF >> conftest.$ac_ext
+ {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+ # Now try linking the two files.
+ mv conftest.$objext conftstm.$objext
+ save_LIBS="$LIBS"
+ save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$objext"
+ CFLAGS="$CFLAGS$no_builtin_flag"
+ if { (eval echo $progname:1404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ pipe_works=yes
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ LIBS="$save_LIBS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ $rm conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ global_symbol_pipe=
+ fi
+done
+if test "$pipe_works" = yes; then
+ echo "${ac_t}ok" 1>&6
+else
+ echo "${ac_t}failed" 1>&6
+fi
+
+if test -z "$global_symbol_pipe"; then
+ global_symbol_to_cdecl=
+fi
+
+# Report the final consequences.
+echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
+
+# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
+# configure.in, otherwise build static only libraries.
+case "$host_os" in
+cygwin* | mingw* | pw32* | os2*)
+ if test x$can_build_shared = xyes; then
+ test x$enable_win32_dll = xno && can_build_shared=no
+ echo "checking if package supports dlls... $can_build_shared" 1>&6
+ fi
+;;
+esac
+
+echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+aix4*)
+ test "$enable_shared" = yes && enable_static=no
+ ;;
+esac
+
+echo "$ac_t$enable_shared" 1>&6
+
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+
+echo "checking whether to build static libraries... $enable_static" 1>&6
+
+if test "$hardcode_action" = relink || test "$hardcode_into_libs" = all; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$with_gcc" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+# Check whether we must set pic_mode to default
+test -z "$pic_flag" && pic_mode=default
+
+if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+if test "X${lt_cv_dlopen+set}" != Xset; then
+ lt_cv_dlopen=no lt_cv_dlopen_libs=
+echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+echo "$progname:1508: checking for dlopen in -ldl" >&5
+if test "X${ac_cv_lib_dl_dlopen+set}" = Xset; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldl $LIBS"
+cat > conftest.$ac_ext <<EOF
+/*#line 1515 "ltconfig"*/
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo $progname:1528: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_lib_dl_dlopen=yes
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if test "X$ac_cv_lib_dl_dlopen" = Xyes; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dlopen""... $ac_c" 1>&6
+echo "$progname:1547: checking for dlopen" >&5
+if test "X${ac_cv_func_dlopen+set}" = Xset; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+/*#line 1552 "ltconfig"*/
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char dlopen(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+dlopen();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo $progname:1577: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_func_dlopen=yes
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_func_dlopen=no
+fi
+rm -f conftest*
+fi
+if test "X$ac_cv_func_dlopen" = Xyes; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="dlopen"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
+echo "$progname:1594: checking for dlopen in -lsvld" >&5
+if test "X${ac_cv_lib_svld_dlopen+set}" = Xset; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lsvld $LIBS"
+cat > conftest.$ac_ext <<EOF
+/* #line 1601 "ltconfig" */
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo $progname:1614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_lib_svld_dlopen=yes
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_lib_svld_dlopen=no
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if test "X$ac_cv_lib_svld_dlopen" = Xyes; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
+echo "$progname:1633: checking for dld_link in -ldld" >&5
+if test "X${ac_cv_lib_dld_dld_link+set}" = Xset; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldld $LIBS"
+cat > conftest.$ac_ext <<EOF
+/* #line 1640 "ltconfig" */
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link();
+
+int main() {
+dld_link()
+; return 0; }
+EOF
+if { (eval echo $progname:1653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_lib_dld_dld_link=yes
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_lib_dld_dld_link=no
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if test "X$ac_cv_lib_dld_dld_link" = Xyes; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load""... $ac_c" 1>&6
+echo "$progname:1672: checking for shl_load" >&5
+if test "X${ac_cv_func_shl_load+set}" = Xset; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+/*#line 1677 "ltconfig"*/
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char shl_load(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+shl_load();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo $progname:1702: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_func_shl_load=yes
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_func_shl_load=no
+fi
+rm -f conftest*
+fi
+
+if test "X$ac_cv_func_shl_load" = Xyes; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="shl_load"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
+echo "$progname:1720: checking for shl_load in -ldld" >&5
+if test "X${ac_cv_lib_dld_shl_load+set}" = Xset; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldld $LIBS"
+cat > conftest.$ac_ext <<EOF
+/*#line 1727 "ltconfig"*/
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load();
+
+int main() {
+shl_load()
+; return 0; }
+EOF
+if { (eval echo $progname:1741: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_lib_dld_shl_load=yes
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_lib_dld_shl_load=no
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if test "X$ac_cv_lib_dld_shl_load" = Xyes; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+fi
+
+fi
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case "$lt_cv_dlopen" in
+ dlopen)
+for ac_hdr in dlfcn.h; do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "$progname:1788: checking for $ac_hdr" >&5
+if eval "test \"`echo 'X$''{'ac_cv_header_$ac_safe'+set}'`\" = Xset"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+/*#line 1793 "ltconfig"*/
+#include <$ac_hdr>
+int fnord = 0;
+int main () { return(0); }
+EOF
+ac_try="$ac_compile >/dev/null 2>conftest.out"
+{ (eval echo $progname:1799: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ if test "x$ac_cv_header_dlfcn_h" = xyes; then
+ CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ fi
+ eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
+echo "$progname:1827: checking whether a program can dlopen itself" >&5
+if test "X${lt_cv_dlopen_self+set}" = Xset; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ lt_cv_dlopen_self=cross
+ else
+ cat > conftest.$ac_ext <<EOF
+/*#line 1835 "ltconfig"*/
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LTDL_GLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LTDL_GLOBAL DL_GLOBAL
+# else
+# define LTDL_GLOBAL 0
+# endif
+#endif
+
+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LTDL_LAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LTDL_LAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LTDL_LAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LTDL_LAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LTDL_LAZY_OR_NOW DL_NOW
+# else
+# define LTDL_LAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+void fnord() { int i=42;}
+int main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+ if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+ if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); return 1; }
+
+EOF
+if { (eval echo $progname:1881: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+ lt_cv_dlopen_self=yes
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ lt_cv_dlopen_self=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self" 1>&6
+
+ if test "$lt_cv_dlopen_self" = yes; then
+ LDFLAGS="$LDFLAGS $link_static_flag"
+ echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
+echo "$progname:1900: checking whether a statically linked program can dlopen itself" >&5
+if test "X${lt_cv_dlopen_self_static+set}" = Xset; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ lt_cv_dlopen_self_static=cross
+ else
+ cat > conftest.$ac_ext <<EOF
+/* #line 1908 "ltconfig" */
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LTDL_GLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LTDL_GLOBAL DL_GLOBAL
+# else
+# define LTDL_GLOBAL 0
+# endif
+#endif
+
+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LTDL_LAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LTDL_LAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LTDL_LAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LTDL_LAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LTDL_LAZY_OR_NOW DL_NOW
+# else
+# define LTDL_LAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+void fnord() { int i=42;}
+int main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+ if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+ if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); return 1; }
+
+EOF
+if { (eval echo $progname:1954: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+ lt_cv_dlopen_self_static=yes
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ lt_cv_dlopen_self_static=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
+fi
+ ;;
+ esac
+
+ case "$lt_cv_dlopen_self" in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case "$lt_cv_dlopen_self_static" in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+
+# Copy echo and quote the copy, instead of the original, because it is
+# used later.
+ltecho="$echo"
+if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+ ltecho="$CONFIG_SHELL \$0 --fallback-echo"
+fi
+LTSHELL="$SHELL"
+
+LTCONFIG_VERSION="$VERSION"
+
+# Only quote variables if we're using ltmain.sh.
+case "$ltmain" in
+*.sh)
+ # Now quote all the things that may contain metacharacters.
+ for var in ltecho old_AR old_AR_FLAGS old_CC old_LTCC old_CFLAGS old_CPPFLAGS \
+ old_MAGIC_CMD old_LD old_LDFLAGS old_LIBS \
+ old_LN_S old_NM old_RANLIB old_STRIP \
+ old_AS old_DLLTOOL old_OBJDUMP \
+ old_OBJEXT old_EXEEXT old_reload_flag \
+ old_deplibs_check_method old_file_magic_cmd \
+ AR AR_FLAGS CC LTCC LD LN_S NM LTSHELL LTCONFIG_VERSION \
+ reload_flag reload_cmds wl \
+ pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+ thread_safe_flag_spec whole_archive_flag_spec libname_spec \
+ library_names_spec soname_spec \
+ RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
+ old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
+ postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
+ predep_objects postdep_objects predeps postdeps compiler_lib_search_path \
+ old_striplib striplib file_magic_cmd export_symbols_cmds \
+ deplibs_check_method allow_undefined_flag no_undefined_flag \
+ finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+ hardcode_libdir_flag_spec hardcode_libdir_separator \
+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+ compiler_c_o need_locks exclude_expsyms include_expsyms; do
+
+ case "$var" in
+ reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
+ old_postinstall_cmds | old_postuninstall_cmds | \
+ export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
+ extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
+ postinstall_cmds | postuninstall_cmds | \
+ finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+ # Double-quote double-evaled strings.
+ eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ### testsuite: skip nested quoting test
+ ;;
+ *)
+ eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ### testsuite: skip nested quoting test
+ ;;
+ esac
+ done
+
+ case "$ltecho" in
+ *'\$0 --fallback-echo"')
+ ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+ ;;
+ esac
+
+ if test -z "$tagname"; then
+ trap "$rm \"$ofile\"; exit 1" 1 2 15
+ echo "creating $ofile"
+ $rm "$ofile"
+ cat <<EOF > "$ofile"
+#! $SHELL
+
+# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
+#
+# Copyright (C) 1996-2000 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="sed -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+# The names of the tagged configurations supported by this script.
+available_tags=
+
+### BEGIN LIBTOOL CONFIG
+EOF
+ else
+ echo "appending configuration tag \"$tagname\" to $ofile"
+ echo "### BEGIN LIBTOOL TAG CONFIG: $tagname" >> "$ofile"
+ fi
+ cfgfile="$ofile"
+ ;;
+
+*)
+ # Double-quote the variables that need it (for aesthetics).
+ for var in old_AR old_AR_FLAGS old_CC old_LTCC old_CFLAGS old_CPPFLAGS \
+ old_MAGIC_CMD old_LD old_LDFLAGS old_LIBS \
+ old_LN_S old_NM old_RANLIB old_STRIP \
+ old_AS old_DLLTOOL old_OBJDUMP \
+ old_OBJEXT old_EXEEXT old_reload_flag \
+ old_deplibs_check_method old_file_magic_cmd; do
+ eval "$var=\\\"\$var\\\""
+ done
+
+ # Just create a config file.
+ cfgfile="$ofile.cfg"
+ if test -z "$tagname"; then
+ trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+ echo "creating $cfgfile"
+ $rm "$cfgfile"
+ cat <<EOF > "$cfgfile"
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+
+### BEGIN LIBTOOL CONFIG
+EOF
+ else
+ echo "appending to $cfgfile"
+ echo "### BEGIN LIBTOOL TAG CONFIG: $tagname" >> "$ofile"
+ fi
+ ;;
+esac
+
+cat <<EOF >> "$cfgfile"
+# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# AR=$old_AR AR_FLAGS=$old_AR_FLAGS LTCC=$old_LTCC CC=$old_CC \\
+# CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
+# MAGIC_CMD=$old_MAGIC_CMD LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
+# LN_S=$old_LN_S NM=$old_NM RANLIB=$old_RANLIB STRIP=$old_STRIP \\
+# AS=$old_AS DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP \\
+# objext=$old_OBJEXT exeext=$old_EXEEXT reload_flag=$old_reload_flag \\
+# deplibs_check_method=$old_deplibs_check_method \\
+# file_magic_cmd=$old_file_magic_cmd \\
+# $0$ltconfig_args
+#
+# Compiler and other test output produced by $progname, useful for
+# debugging $progname, is in ./config.log if it exists.
+
+# The version of $progname that generated this script.
+LTCONFIG_VERSION=$LTCONFIG_VERSION
+
+# Shell to use when invoking shell scripts.
+SHELL=$LTSHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$need_lc
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+
+# An echo program that does not interpret backslashes.
+echo=$ltecho
+
+# The archiver.
+AR=$AR
+AR_FLAGS=$AR_FLAGS
+
+# A C compiler.
+LTCC=$LTCC
+
+# A language-specific compiler.
+CC=$CC
+
+# Is the compiler the GNU C compiler?
+with_gcc=$with_gcc
+
+# The linker used to build libraries.
+LD=$LD
+
+# Whether we need hard or soft links.
+LN_S=$LN_S
+
+# A BSD-compatible nm program.
+NM=$NM
+
+# A symbol stripping program
+STRIP=$STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$reload_flag
+reload_cmds=$reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$wl
+
+# Object file suffix (normally "o").
+objext="$objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$pic_flag
+pic_mode=$pic_mode
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$compiler_c_o
+
+# Must we lock files when doing compilation ?
+need_locks=$need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$link_static_flag
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$libname_spec
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$RANLIB
+old_archive_cmds=$old_archive_cmds
+old_postinstall_cmds=$old_postinstall_cmds
+old_postuninstall_cmds=$old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$old_archive_from_expsyms_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$archive_cmds
+archive_expsym_cmds=$archive_expsym_cmds
+postinstall_cmds=$postinstall_cmds
+postuninstall_cmds=$postuninstall_cmds
+
+# Commands to strip libraries.
+old_striplib=$old_striplib
+striplib=$striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$predep_objects
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$postdep_objects
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$predeps
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$compiler_lib_search_path
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$global_symbol_to_cdecl
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$export_symbols_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$include_expsyms
+
+EOF
+
+if test -z "$tagname"; then
+ echo '### END LIBTOOL CONFIG' >> "$ofile"
+else
+ echo "### END LIBTOOL TAG CONFIG: $tagname" >> "$ofile"
+fi
+
+case "$ltmain" in
+*.sh)
+ echo >> "$ofile"
+ if test -z "$tagname"; then
+ case "$host_os" in
+ aix3*)
+ cat <<\EOF >> "$ofile"
+
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+EOF
+ ;;
+ esac
+ case "$host" in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ cat <<'EOF' >> "$ofile"
+ # This is a source program that is used to create dlls on Windows
+ # Don't remove nor modify the starting and closing comments
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# # ifdef __CYGWIN32__
+# # define __CYGWIN__ __CYGWIN32__
+# # endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+# __hDllInstance_base = hInst;
+# return TRUE;
+# }
+# /* ltdll.c ends here */
+ # This is a source program that is used to create import libraries
+ # on Windows for dlls which lack them. Don't remove nor modify the
+ # starting and closing comments
+# /* impgen.c starts here */
+# /* Copyright (C) 1999-2000 Free Software Foundation, Inc.
+#
+# This file is part of GNU libtool.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# */
+#
+# #include <stdio.h> /* for printf() */
+# #include <unistd.h> /* for open(), lseek(), read() */
+# #include <fcntl.h> /* for O_RDONLY, O_BINARY */
+# #include <string.h> /* for strdup() */
+#
+# /* O_BINARY isn't required (or even defined sometimes) under Unix */
+# #ifndef O_BINARY
+# #define O_BINARY 0
+# #endif
+#
+# static unsigned int
+# pe_get16 (fd, offset)
+# int fd;
+# int offset;
+# {
+# unsigned char b[2];
+# lseek (fd, offset, SEEK_SET);
+# read (fd, b, 2);
+# return b[0] + (b[1]<<8);
+# }
+#
+# static unsigned int
+# pe_get32 (fd, offset)
+# int fd;
+# int offset;
+# {
+# unsigned char b[4];
+# lseek (fd, offset, SEEK_SET);
+# read (fd, b, 4);
+# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+# }
+#
+# static unsigned int
+# pe_as32 (ptr)
+# void *ptr;
+# {
+# unsigned char *b = ptr;
+# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+# }
+#
+# int
+# main (argc, argv)
+# int argc;
+# char *argv[];
+# {
+# int dll;
+# unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
+# unsigned long export_rva, export_size, nsections, secptr, expptr;
+# unsigned long name_rvas, nexp;
+# unsigned char *expdata, *erva;
+# char *filename, *dll_name;
+#
+# filename = argv[1];
+#
+# dll = open(filename, O_RDONLY|O_BINARY);
+# if (!dll)
+# return 1;
+#
+# dll_name = filename;
+#
+# for (i=0; filename[i]; i++)
+# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':')
+# dll_name = filename + i +1;
+#
+# pe_header_offset = pe_get32 (dll, 0x3c);
+# opthdr_ofs = pe_header_offset + 4 + 20;
+# num_entries = pe_get32 (dll, opthdr_ofs + 92);
+#
+# if (num_entries < 1) /* no exports */
+# return 1;
+#
+# export_rva = pe_get32 (dll, opthdr_ofs + 96);
+# export_size = pe_get32 (dll, opthdr_ofs + 100);
+# nsections = pe_get16 (dll, pe_header_offset + 4 +2);
+# secptr = (pe_header_offset + 4 + 20 +
+# pe_get16 (dll, pe_header_offset + 4 + 16));
+#
+# expptr = 0;
+# for (i = 0; i < nsections; i++)
+# {
+# char sname[8];
+# unsigned long secptr1 = secptr + 40 * i;
+# unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
+# unsigned long vsize = pe_get32 (dll, secptr1 + 16);
+# unsigned long fptr = pe_get32 (dll, secptr1 + 20);
+# lseek(dll, secptr1, SEEK_SET);
+# read(dll, sname, 8);
+# if (vaddr <= export_rva && vaddr+vsize > export_rva)
+# {
+# expptr = fptr + (export_rva - vaddr);
+# if (export_rva + export_size > vaddr + vsize)
+# export_size = vsize - (export_rva - vaddr);
+# break;
+# }
+# }
+#
+# expdata = (unsigned char*)malloc(export_size);
+# lseek (dll, expptr, SEEK_SET);
+# read (dll, expdata, export_size);
+# erva = expdata - export_rva;
+#
+# nexp = pe_as32 (expdata+24);
+# name_rvas = pe_as32 (expdata+32);
+#
+# printf ("EXPORTS\n");
+# for (i = 0; i<nexp; i++)
+# {
+# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
+# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
+# }
+#
+# return 0;
+# }
+# /* impgen.c ends here */
+
+EOF
+ ;;
+ esac
+
+
+ # Append the ltmain.sh script.
+ sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+
+ chmod +x "$ofile"
+ fi
+ ;;
+
+*)
+ # Compile the libtool program.
+ echo "FIXME: would compile $ltmain"
+ ;;
+esac
+
+# Update the list of available tags.
+if test -n "$tagname"; then
+
+ # Extract list of available tagged configurations in $ofile.
+ # Note that this assumes the entire list is on one line.
+ available_tags=`grep "^available_tags=" $ofile | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+
+ # Append the new tag name to the list of available tags.
+ available_tags="$available_tags $tagname"
+
+ # Now substitute the updated of available tags.
+ if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' ${ofile} > ${ofile}.new"; then
+ mv ${ofile}.new ${ofile}
+ chmod +x "$ofile"
+ else
+ rm -f ${ofile}.new
+ echo "$progname: unable to update list of available tagged configurations."
+ exit 1
+ fi
+fi
+
+# Don't cache tagged configuration!
+test -n "$cache_file" && test -z "$tagname" || exit 0
+
+# AC_CACHE_SAVE
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
Property changes on: kde-extras/kfocus/branches/upstream/current/admin/ltconfig
___________________________________________________________________
Name: svn:executable
+
Added: kde-extras/kfocus/branches/upstream/current/admin/ltmain.sh
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/ltmain.sh 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/ltmain.sh 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,5049 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun ltconfig.
+#
+# Copyright (C) 1996-2000, 2001 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+ # Yippee, $echo works!
+ :
+else
+ # Restart under the correct shell, and then maybe $echo will work.
+ exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit 0
+fi
+
+# The name of this program.
+progname=`$echo "$0" | sed 's%^.*/%%'`
+modename="$progname"
+
+# Constants.
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.4a
+TIMESTAMP=" (1.641.2.179mm 2001/02/15 21:55:40)"
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+SP2NL='tr \040 \012'
+NL2SP='tr \015\012 \040\040'
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+if test "${LC_ALL+set}" = set; then
+ save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+ save_LANG="$LANG"; LANG=C; export LANG
+fi
+
+if test "$LTCONFIG_VERSION" != "$VERSION"; then
+ echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ exit 1
+fi
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ echo "$modename: not configured to build any kind of library" 1>&2
+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ exit 1
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+
+# Parse our command line options once, thoroughly.
+while test $# -gt 0
+do
+ arg="$1"
+ shift
+
+ case "$arg" in
+ -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) optarg= ;;
+ esac
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case "$prev" in
+ execute_dlfiles)
+ execute_dlfiles="$execute_dlfiles $arg"
+ ;;
+ tag)
+ tagname="$arg"
+
+ # Check whether tagname contains only valid characters
+ case "$tagname" in
+ *[!-_A-Za-z0-9,/]*)
+ echo "$progname: invalid tag name: $tagname" 1>&2
+ exit 1
+ ;;
+ esac
+
+ if grep "^### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
+ taglist="$taglist $tagname"
+ # Evaluate the configuration.
+ eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
+ else
+ echo "$progname: ignoring unknown tag $tagname" 1>&2
+ fi
+ ;;
+ *)
+ eval "$prev=\$arg"
+ ;;
+ esac
+
+ prev=
+ prevopt=
+ continue
+ fi
+
+ # Have we seen a non-optional argument yet?
+ case "$arg" in
+ --help)
+ show_help=yes
+ ;;
+
+ --version)
+ echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+ exit 0
+ ;;
+
+ --config)
+ sed -n -e '/^### BEGIN LIBTOOL CONFIG/,/^### END LIBTOOL CONFIG/p' < "$0"
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ sed -n -e "/^### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
+ done
+ exit 0
+ ;;
+
+ --debug)
+ echo "$progname: enabling shell trace mode"
+ set -x
+ ;;
+
+ --dry-run | -n)
+ run=:
+ ;;
+
+ --features)
+ echo "host: $host"
+ if test "$build_libtool_libs" = yes; then
+ echo "enable shared libraries"
+ else
+ echo "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+ echo "enable static libraries"
+ else
+ echo "disable static libraries"
+ fi
+ exit 0
+ ;;
+
+ --finish) mode="finish" ;;
+
+ --mode) prevopt="--mode" prev=mode ;;
+ --mode=*) mode="$optarg" ;;
+
+ --quiet | --silent)
+ show=:
+ ;;
+
+ --tag) prevopt="--tag" prev=tag ;;
+ --tag=*)
+ set tag "$optarg" ${1+"$@"}
+ shift
+ prev=tag
+ ;;
+
+ -dlopen)
+ prevopt="-dlopen"
+ prev=execute_dlfiles
+ ;;
+
+ -*)
+ $echo "$modename: unrecognized option \`$arg'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+
+ *)
+ nonopt="$arg"
+ break
+ ;;
+ esac
+done
+
+if test -n "$prevopt"; then
+ $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+fi
+
+if test -z "$show_help"; then
+
+ # Infer the operation mode.
+ if test -z "$mode"; then
+ case "$nonopt" in
+ *cc | *++ | gcc* | *-gcc*)
+ mode=link
+ for arg
+ do
+ case "$arg" in
+ -c)
+ mode=compile
+ break
+ ;;
+ esac
+ done
+ ;;
+ *db | *dbx | *strace | *truss)
+ mode=execute
+ ;;
+ *install*|cp|mv)
+ mode=install
+ ;;
+ *rm)
+ mode=uninstall
+ ;;
+ *)
+ # If we have no mode, but dlfiles were specified, then do execute mode.
+ test -n "$execute_dlfiles" && mode=execute
+
+ # Just use the default operation mode.
+ if test -z "$mode"; then
+ if test -n "$nonopt"; then
+ $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+ else
+ $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+ fi
+ fi
+ ;;
+ esac
+ fi
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$execute_dlfiles" && test "$mode" != execute; then
+ $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$modename --help --mode=$mode' for more information."
+
+ # These modes are in order of execution frequency so that they run quickly.
+ case "$mode" in
+ # libtool compile mode
+ compile)
+ modename="$modename: compile"
+ # Get the compilation command and the source file.
+ base_compile=
+ prev=
+ lastarg=
+ srcfile="$nonopt"
+ suppress_output=
+
+ user_target=no
+ for arg
+ do
+ case "$prev" in
+ "") ;;
+ xcompiler)
+ # Aesthetically quote the previous argument.
+ prev=
+ lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+
+ case "$arg" in
+ # Double-quote args containing other shell metacharacters.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+
+ # Add the previous argument to base_compile.
+ if test -z "$base_compile"; then
+ base_compile="$lastarg"
+ else
+ base_compile="$base_compile $lastarg"
+ fi
+ continue
+ ;;
+ esac
+
+ # Accept any command-line options.
+ case "$arg" in
+ -o)
+ if test "$user_target" != "no"; then
+ $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+ exit 1
+ fi
+ user_target=next
+ ;;
+
+ -static)
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Wc,*)
+ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+ lastarg=
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+
+ # Double-quote args containing other shell metacharacters.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ lastarg="$lastarg $arg"
+ done
+ IFS="$save_ifs"
+ lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+
+ # Add the arguments to base_compile.
+ if test -z "$base_compile"; then
+ base_compile="$lastarg"
+ else
+ base_compile="$base_compile $lastarg"
+ fi
+ continue
+ ;;
+ esac
+
+ case "$user_target" in
+ next)
+ # The next one is the -o target name
+ user_target=yes
+ continue
+ ;;
+ yes)
+ # We got the output file
+ user_target=set
+ libobj="$arg"
+ continue
+ ;;
+ esac
+
+ # Accept the current argument as the source file.
+ lastarg="$srcfile"
+ srcfile="$arg"
+
+ # Aesthetically quote the previous argument.
+
+ # Backslashify any backslashes, double quotes, and dollar signs.
+ # These are the only characters that are still specially
+ # interpreted inside of double-quoted scrings.
+ lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+ # Double-quote args containing other shell metacharacters.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ case "$lastarg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ lastarg="\"$lastarg\""
+ ;;
+ esac
+
+ # Add the previous argument to base_compile.
+ if test -z "$base_compile"; then
+ base_compile="$lastarg"
+ else
+ base_compile="$base_compile $lastarg"
+ fi
+ done
+
+ case "$user_target" in
+ set)
+ ;;
+ no)
+ # Get the name of the library object.
+ libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+ ;;
+ *)
+ $echo "$modename: you must specify a target with \`-o'" 1>&2
+ exit 1
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ xform='[cCFSfmso]'
+ case "$libobj" in
+ *.ada) xform=ada ;;
+ *.adb) xform=adb ;;
+ *.ads) xform=ads ;;
+ *.asm) xform=asm ;;
+ *.c++) xform=c++ ;;
+ *.cc) xform=cc ;;
+ *.class) xform=class ;;
+ *.cpp) xform=cpp ;;
+ *.cxx) xform=cxx ;;
+ *.f90) xform=f90 ;;
+ *.for) xform=for ;;
+ *.java) xform=java ;;
+ esac
+
+ libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+ case "$libobj" in
+ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+ *)
+ $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+ exit 1
+ ;;
+ esac
+
+ # Infer tagged configuration to use if any are available and
+ # if one wasn't chosen via the "--tag" command line option.
+ # Only attempt this if the compiler in the base compile
+ # command doesn't match the default compiler.
+ if test -n "$available_tags" && test -z "$tagname"; then
+ case $base_compile in
+ "$CC "*) ;;
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when ltconfig was run.
+ "`$echo $CC` "*) ;;
+ *)
+ for z in $available_tags; do
+ if grep "^### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+ case $base_compile in
+ "$CC "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ "`$echo $CC` "*)
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ echo "$modename: unable to infer tagged configuration"
+ echo "$modename: specify a tag with \`--tag'" 1>&2
+ exit 1
+# else
+# echo "$modename: using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+
+ objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$obj"; then
+ xdir=
+ else
+ xdir=$xdir/
+ fi
+ lobj=${xdir}$objdir/$objname
+
+ if test -z "$base_compile"; then
+ $echo "$modename: you must specify a compilation command" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ # Delete any leftover library objects.
+ if test "$build_old_libs" = yes; then
+ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ $run $rm $removelist
+ trap "$run $rm $removelist; exit 1" 1 2 15
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case "$host_os" in
+ cygwin* | mingw* | pw32* | os2*)
+ pic_mode=default
+ ;;
+ esac
+ if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test "$compiler_c_o" = no; then
+ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ removelist="$removelist $output_obj $lockfile"
+ trap "$run $rm $removelist; exit 1" 1 2 15
+ else
+ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+ until $run ln "$0" "$lockfile" 2>/dev/null; do
+ $show "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+ echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $run $rm $removelist
+ exit 1
+ fi
+ echo $srcfile > "$lockfile"
+ fi
+
+ if test -n "$fix_srcfile_path"; then
+ eval srcfile=\"$fix_srcfile_path\"
+ fi
+
+ $run $rm "$libobj" "${libobj}T"
+
+ # Create a libtool object file (analogous to a ".la" file),
+ # but don't create it if we're doing a dry run.
+ test -z "$run" && cat > ${libobj}T <<EOF
+# $libobj - a libtool object file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+EOF
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test "$build_libtool_libs" = yes; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test "$pic_mode" != no; then
+ command="$base_compile $srcfile $pic_flag"
+ else
+ # Don't build PIC code
+ command="$base_compile $srcfile"
+ fi
+
+ if test ! -d ${xdir}$objdir; then
+ $show "$mkdir ${xdir}$objdir"
+ $run $mkdir ${xdir}$objdir
+ status=$?
+ if test $status -ne 0 && test ! -d ${xdir}$objdir; then
+ exit $status
+ fi
+ fi
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ command="$command -o $lobj"
+ fi
+
+ $run $rm "$lobj" "$output_obj"
+
+ $show "$command"
+ if $run eval "$command"; then :
+ else
+ test -n "$output_obj" && $run $rm $removelist
+ exit 1
+ fi
+
+ if test "$need_locks" = warn &&
+ test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+ echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $run $rm $removelist
+ exit 1
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test -n "$output_obj" && test "x$output_obj" != "x$lobj"; then
+ $show "$mv $output_obj $lobj"
+ if $run $mv $output_obj $lobj; then :
+ else
+ error=$?
+ $run $rm $removelist
+ exit $error
+ fi
+ fi
+
+ # Append the name of the PIC object to the libtool object file.
+ test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object='$objdir/$objname'
+
+EOF
+
+ # Allow error messages only from the first compilation.
+ suppress_output=' >/dev/null 2>&1'
+ else
+ # No PIC object so indicate it doesn't exist in the libtool
+ # object file.
+ test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object=none
+
+EOF
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test "$build_old_libs" = yes; then
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+ command="$base_compile $srcfile"
+ else
+ command="$base_compile $srcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+ command="$command -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ command="$command$suppress_output"
+ $run $rm "$obj" "$output_obj"
+ $show "$command"
+ if $run eval "$command"; then :
+ else
+ $run $rm $removelist
+ exit 1
+ fi
+
+ if test "$need_locks" = warn &&
+ test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+ echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $run $rm $removelist
+ exit 1
+ fi
+
+ # Just move the object if needed
+ if test -n "$output_obj" && test "x$output_obj" != "x$obj"; then
+ $show "$mv $output_obj $obj"
+ if $run $mv $output_obj $obj; then :
+ else
+ error=$?
+ $run $rm $removelist
+ exit $error
+ fi
+ fi
+
+ # Append the name of the non-PIC object the libtool object file.
+ # Only append if the libtool object file exists.
+ test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object='$objname'
+
+EOF
+ else
+ # Append the name of the non-PIC object the libtool object file.
+ # Only append if the libtool object file exists.
+ test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object=none
+
+EOF
+ fi
+
+ $run $mv "${libobj}T" "${libobj}"
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ $run $rm "$lockfile"
+ fi
+
+ exit 0
+ ;;
+
+ # libtool link mode
+ link | relink)
+ modename="$modename: link"
+ case "$host" in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # which system we are compiling for in order to pass an extra
+ # flag for every libtool invokation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+ # to make a dll which has undefined symbols, in which case not
+ # even a static library is built. For now, we need to specify
+ # -no-undefined on the libtool link line when we can be certain
+ # that all symbols are satisfied, otherwise we get a static library.
+ allow_undefined=yes
+ ;;
+ *)
+ allow_undefined=yes
+ ;;
+ esac
+ libtool_args="$nonopt"
+ base_compile="$nonopt"
+ compile_command="$nonopt"
+ finalize_command="$nonopt"
+
+ compile_rpath=
+ finalize_rpath=
+ compile_shlibpath=
+ finalize_shlibpath=
+ convenience=
+ old_convenience=
+ deplibs=
+ old_deplibs=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
+
+ avoid_version=no
+ dlfiles=
+ dlprefiles=
+ dlself=no
+ export_dynamic=no
+ export_symbols=
+ export_symbols_regex=
+ generated=
+ libobjs=
+ ltlibs=
+ module=no
+ no_install=no
+ objs=
+ non_pic_objects=
+ prefer_static_libs=no
+ preload=no
+ prev=
+ prevarg=
+ release=
+ rpath=
+ xrpath=
+ perm_rpath=
+ temp_rpath=
+ thread_safe=no
+ vinfo=
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case "$arg" in
+ -all-static | -static)
+ if test "X$arg" = "X-all-static"; then
+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ else
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ fi
+ build_libtool_libs=no
+ build_old_libs=yes
+ prefer_static_libs=yes
+ break
+ ;;
+ esac
+ done
+
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+ while test $# -gt 0; do
+ arg="$1"
+ base_compile="$base_compile $arg"
+ shift
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+ ;;
+ *) qarg=$arg ;;
+ esac
+ libtool_args="$libtool_args $qarg"
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case "$prev" in
+ output)
+ compile_command="$compile_command @OUTPUT@"
+ finalize_command="$finalize_command @OUTPUT@"
+ ;;
+ esac
+
+ case "$prev" in
+ dlfiles|dlprefiles)
+ if test "$preload" = no; then
+ # Add the symbol object into the linking commands.
+ compile_command="$compile_command @SYMFILE@"
+ finalize_command="$finalize_command @SYMFILE@"
+ preload=yes
+ fi
+ case "$arg" in
+ *.la | *.lo) ;; # We handle these cases below.
+ force)
+ if test "$dlself" = no; then
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ self)
+ if test "$prev" = dlprefiles; then
+ dlself=yes
+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ if test "$prev" = dlfiles; then
+ dlfiles="$dlfiles $arg"
+ else
+ dlprefiles="$dlprefiles $arg"
+ fi
+ prev=
+ continue
+ ;;
+ esac
+ ;;
+ expsyms)
+ export_symbols="$arg"
+ if test ! -f "$arg"; then
+ $echo "$modename: symbol file \`$arg' does not exist"
+ exit 1
+ fi
+ prev=
+ continue
+ ;;
+ expsyms_regex)
+ export_symbols_regex="$arg"
+ prev=
+ continue
+ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case "$arg" in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ $echo "$modename: only absolute run-paths are allowed" 1>&2
+ exit 1
+ ;;
+ esac
+ if test "$prev" = rpath; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) rpath="$rpath $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) xrpath="$xrpath $arg" ;;
+ esac
+ fi
+ prev=
+ continue
+ ;;
+ xcompiler)
+ compiler_flags="$compiler_flags $qarg"
+ prev=
+ compile_command="$compile_command $qarg"
+ finalize_command="$finalize_command $qarg"
+ continue
+ ;;
+ xlinker)
+ linker_flags="$linker_flags $qarg"
+ compiler_flags="$compiler_flags $wl$qarg"
+ prev=
+ compile_command="$compile_command $wl$qarg"
+ finalize_command="$finalize_command $wl$qarg"
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+ fi
+
+ prevarg="$arg"
+
+ case "$arg" in
+ -all-static)
+ if test -n "$link_static_flag"; then
+ compile_command="$compile_command $link_static_flag"
+ finalize_command="$finalize_command $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+ continue
+ ;;
+
+ -avoid-version)
+ avoid_version=yes
+ continue
+ ;;
+
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
+
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
+
+ -export-dynamic)
+ export_dynamic=yes
+ continue
+ ;;
+
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ $echo "$modename: not more than one -exported-symbols argument allowed"
+ exit 1
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+ else
+ prev=expsyms_regex
+ fi
+ continue
+ ;;
+
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+ no/*-*-irix*)
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ ;;
+ esac
+ continue
+ ;;
+
+ -L*)
+ dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+ # We need an absolute path.
+ case "$dir" in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+ exit 1
+ fi
+ dir="$absdir"
+ ;;
+ esac
+ case "$deplibs " in
+ *" -L$dir "*) ;;
+ *)
+ deplibs="$deplibs -L$dir"
+ lib_search_path="$lib_search_path $dir"
+ ;;
+ esac
+ case "$host" in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ case ":$dllsearchpath:" in
+ *":$dir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$dir";;
+ esac
+ ;;
+ esac
+ continue
+ ;;
+
+ -l*)
+ if test "$arg" = "-lc"; then
+ case "$host" in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+ # These systems don't actually have c library (as such)
+ continue
+ ;;
+ *-*-rhapsody* | *-*-darwin*)
+ # Darwin C library is in the System framework
+ deplibs="$deplibs -framework System"
+ ;;
+ esac
+ elif test "$arg" = "-lm"; then
+ case "$host" in
+ *-*-cygwin* | *-*-pw32* | *-*-beos*)
+ # These systems don't actually have math library (as such)
+ continue
+ ;;
+ *-*-rhapsody* | *-*-darwin*)
+ # Darwin math library is in the System framework
+ deplibs="$deplibs -framework System"
+ ;;
+ esac
+ fi
+ deplibs="$deplibs $arg"
+ continue
+ ;;
+
+ -module)
+ module=yes
+ continue
+ ;;
+
+ -no-fast-install)
+ fast_install=no
+ continue
+ ;;
+
+ -no-install)
+ case "$host" in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ # The PATH hackery in wrapper scripts is required on Windows
+ # in order for the loader to find any dlls it needs.
+ $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+ $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+ fast_install=no
+ ;;
+ *-*-rhapsody* | *-*-darwin*)
+ # Darwin C library is in the System framework
+ deplibs="$deplibs -framework System"
+ ;;
+ *)
+ no_install=yes
+ ;;
+ esac
+ continue
+ ;;
+
+ -no-undefined)
+ allow_undefined=no
+ continue
+ ;;
+
+ -o) prev=output ;;
+
+ -release)
+ prev=release
+ continue
+ ;;
+
+ -rpath)
+ prev=rpath
+ continue
+ ;;
+
+ -R)
+ prev=xrpath
+ continue
+ ;;
+
+ -R*)
+ dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+ # We need an absolute path.
+ case "$dir" in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ $echo "$modename: only absolute run-paths are allowed" 1>&2
+ exit 1
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) xrpath="$xrpath $dir" ;;
+ esac
+ continue
+ ;;
+
+ -static)
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+ # would be equivalent was wrong. It would break on at least
+ # Digital Unix and AIX.
+ continue
+ ;;
+
+ -thread-safe)
+ thread_safe=yes
+ continue
+ ;;
+
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
+
+ -Wc,*)
+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+ arg=
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ case "$flag" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ flag="\"$flag\""
+ ;;
+ esac
+ arg="$arg $wl$flag"
+ compiler_flags="$compiler_flags $flag"
+ done
+ IFS="$save_ifs"
+ arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+ ;;
+
+ -Wl,*)
+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+ arg=
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ case "$flag" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ flag="\"$flag\""
+ ;;
+ esac
+ arg="$arg $wl$flag"
+ compiler_flags="$compiler_flags $wl$flag"
+ linker_flags="$linker_flags $flag"
+ done
+ IFS="$save_ifs"
+ arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Xlinker)
+ prev=xlinker
+ continue
+ ;;
+
+ # Some other compiler flag.
+ -* | +*)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ ;;
+
+ *.$objext)
+ # A standard object.
+ objs="$objs $arg"
+ ;;
+
+ *.lo)
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ # If there is no directory component, then add one.
+ case "$arg" in
+ */* | *\\*) . $arg ;;
+ *) . ./$arg ;;
+ esac
+
+ if test -z "$pic_object" || \
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none && \
+ test "$non_pic_object" = none; then
+ $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+ exit 1
+ fi
+
+ # Extract subdirectory from the argument.
+ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$arg"; then
+ xdir=
+ else
+ xdir="$xdir/"
+ fi
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ dlfiles="$dlfiles $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ dlprefiles="$dlprefiles $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ libobjs="$libobjs $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ non_pic_objects="$non_pic_objects $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if test -z "$run"; then
+ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+ exit 1
+ else
+ # Dry-run case.
+
+ # Extract subdirectory from the argument.
+ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$arg"; then
+ xdir=
+ else
+ xdir="$xdir/"
+ fi
+
+ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+ libobjs="$libobjs $pic_object"
+ non_pic_objects="$non_pic_objects $non_pic_object"
+ fi
+ fi
+ ;;
+
+ *.$libext)
+ # An archive.
+ deplibs="$deplibs $arg"
+ old_deplibs="$old_deplibs $arg"
+ continue
+ ;;
+
+ *.la)
+ # A libtool-controlled library.
+
+ if test "$prev" = dlfiles; then
+ # This library was specified with -dlopen.
+ dlfiles="$dlfiles $arg"
+ prev=
+ elif test "$prev" = dlprefiles; then
+ # The library was specified with -dlpreopen.
+ dlprefiles="$dlprefiles $arg"
+ prev=
+ else
+ deplibs="$deplibs $arg"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ ;;
+ esac
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ fi
+ done
+
+ if test -n "$prev"; then
+ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ # Infer tagged configuration to use if any are available and
+ # if one wasn't chosen via the "--tag" command line option.
+ # Only attempt this if the compiler in the base link
+ # command doesn't match the default compiler.
+ if test -n "$available_tags" && test -z "$tagname"; then
+ case $base_compile in
+ "$CC "*) ;;
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when ltconfig was run.
+ "`$echo $CC` "*) ;;
+ *)
+ for z in $available_tags; do
+ if grep "^### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+ case $base_compile in
+ "$CC "*)
+ # The compiler in $compile_command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ "`$echo $CC` "*)
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ echo "$modename: unable to infer tagged configuration"
+ echo "$modename: specify a tag with \`--tag'" 1>&2
+ exit 1
+# else
+# echo "$modename: using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+ libobjs_save="$libobjs"
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$output_objdir" = "X$output"; then
+ output_objdir="$objdir"
+ else
+ output_objdir="$output_objdir/$objdir"
+ fi
+ # Create the object directory.
+ if test ! -d $output_objdir; then
+ $show "$mkdir $output_objdir"
+ $run $mkdir $output_objdir
+ status=$?
+ if test $status -ne 0 && test ! -d $output_objdir; then
+ exit $status
+ fi
+ fi
+
+ # Determine the type of output
+ case "$output" in
+ "")
+ $echo "$modename: you must specify an output file" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ specialdeplibs=
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ case "$libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ libs="$libs $deplib"
+ done
+
+ if test $linkmode = lib; then
+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
+ fi
+
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ uninst_deplibs= # uninstalled libtool libraries
+ uninst_path= # paths that contain uninstalled libtool libraries
+ case $linkmode in
+ lib)
+ passes="conv link"
+ for file in $dlfiles $dlprefiles; do
+ case "$file" in
+ *.la) ;;
+ *)
+ $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=no
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+ for pass in $passes; do
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan"; then
+ libs="$deplibs"
+ deplibs=
+ fi
+ if test $linkmode = prog; then
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+ esac
+ fi
+ if test $pass = dlopen; then
+ # Collect dlpreopened libraries
+ save_deplibs="$deplibs"
+ deplibs=
+ fi
+ for deplib in $libs; do
+ lib=
+ found=no
+ case "$deplib" in
+ -l*)
+ if test $linkmode != lib && test $linkmode != prog; then
+ $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+ continue
+ fi
+ if test $pass = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}.la"
+ if test -f "$lib"; then
+ found=yes
+ break
+ fi
+ done
+ if test "$found" != yes; then
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ ;;
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test $pass = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ ;;
+ prog)
+ if test $pass = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test $pass = scan; then
+ deplibs="$deplib $deplibs"
+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ ;;
+ *)
+ $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+ ;;
+ esac
+ continue
+ ;;
+ -R*)
+ if test $pass = link; then
+ dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) xrpath="$xrpath $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la) lib="$deplib" ;;
+ *.$libext)
+ if test $pass = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ if test "$deplibs_check_method" != pass_all; then
+ echo
+ echo "*** Warning: This library needs some functionality provided by $deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ else
+ echo
+ echo "*** Warning: Linking the shared library $output against the"
+ echo "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ continue
+ ;;
+ prog)
+ if test $pass != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac
+ ;;
+ *.lo | *.$objext)
+ if test $pass = conv; then
+ deplibs="$deplib $deplibs"
+ elif test $linkmode = prog; then
+ if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ newdlprefiles="$newdlprefiles $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ newdlfiles="$newdlfiles $deplib"
+ fi
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=yes
+ continue
+ ;;
+ esac
+ if test $found = yes || test -f "$lib"; then :
+ else
+ $echo "$modename: cannot find the library \`$lib'" 1>&2
+ exit 1
+ fi
+
+ # Check to see that this really is a libtool archive.
+ if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ exit 1
+ fi
+
+ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$ladir" = "X$lib" && ladir="."
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variable installed.
+ installed=yes
+
+ # Read the .la file
+ case "$lib" in
+ */* | *\\*) . $lib ;;
+ *) . ./$lib ;;
+ esac
+
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test $linkmode != prog && test $linkmode != lib; }; then
+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+ fi
+
+ if test $pass = conv; then
+ # only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+ exit 1
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ convenience="$convenience $ladir/$objdir/$old_library"
+ old_convenience="$old_convenience $ladir/$objdir/$old_library"
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ tmp_libs="$tmp_libs $deplib"
+ done
+ elif test $linkmode != prog && test $linkmode != lib; then
+ $echo "$modename: \`$lib' is not a convenience library" 1>&2
+ exit 1
+ fi
+ continue
+ fi
+
+ # Get the name of the library we link against.
+ linklib=
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ if test -z "$linklib"; then
+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+ exit 1
+ fi
+
+ # This library was specified with -dlopen.
+ if test $pass = dlopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+ exit 1
+ fi
+ if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+ dlprefiles="$dlprefiles $lib $dependency_libs"
+ else
+ newdlfiles="$newdlfiles $lib"
+ fi
+ continue
+ fi
+
+ # We need an absolute path.
+ case "$ladir" in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+ $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+ abs_ladir="$ladir"
+ fi
+ ;;
+ esac
+ laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+
+ # Find the relevant object directory and library name.
+ if test "X$installed" = Xyes; then
+ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ $echo "$modename: warning: library \`$lib' was moved." 1>&2
+ dir="$ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+ dir="$libdir"
+ absdir="$libdir"
+ fi
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ uninst_path="$uninst_path $abs_ladir"
+ fi
+ name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+ # This library was specified with -dlpreopen.
+ if test $pass = dlpreopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+ exit 1
+ fi
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ newdlprefiles="$newdlprefiles $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ newdlprefiles="$newdlprefiles $dir/$dlname"
+ else
+ newdlprefiles="$newdlprefiles $dir/$linklib"
+ fi
+ fi
+
+ if test -z "$libdir"; then
+ # link the convenience library
+ if test $linkmode = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs" # used for prog,scan pass
+ fi
+ continue
+ fi
+
+ if test $linkmode = prog && test $pass != link; then
+ newlib_search_path="$newlib_search_path $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=no
+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
+ test "$build_libtool_libs" = no; then
+ linkalldeplibs=yes
+ fi
+
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case "$deplib" in
+ -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+ esac
+ # Need to link against all dependency_libs?
+ if test $linkalldeplibs = yes; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ tmp_libs="$tmp_libs $deplib"
+ done
+ continue
+ fi
+
+ if test "$linkmode,$pass" = "prog,link"; then
+ if test -n "$library_names" &&
+ { test "$hardcode_into_libs" != all || test "$alldeplibs" != yes; } &&
+ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var"; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath " in
+ *" $dir "*) ;;
+ *" $absdir "*) ;;
+ *) temp_rpath="$temp_rpath $dir" ;;
+ esac
+ fi
+
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) compile_rpath="$compile_rpath $absdir"
+ esac
+ ;;
+ esac
+
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir"
+ esac
+ ;;
+ esac
+ fi
+
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+ fi
+
+ link_static=no # Whether the deplib will be linked statically
+ if test -n "$library_names" &&
+ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+ if test "$installed" = no; then
+ uninst_deplibs="$uninst_deplibs $lib"
+ need_relink=yes
+ fi
+ # This is a shared library
+ if test $linkmode = lib && test "$hardcode_into_libs" = all; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) compile_rpath="$compile_rpath $absdir"
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir"
+ esac
+ ;;
+ esac
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ realname="$2"
+ shift; shift
+ libname=`eval \\$echo \"$libname_spec\"`
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ $show "extracting exported symbol list from \`$soname'"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ eval cmds=\"$extract_expsyms_cmds\"
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ $show "generating import library for \`$soname'"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ eval cmds=\"$old_archive_from_expsyms_cmds\"
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi
+
+ if test $linkmode = prog || test "$mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case "$hardcode_action" in
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = no; then
+ case "$host" in
+ *-*-sunos*) add_shlibpath="$dir" ;;
+ esac
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test "$hardcode_direct" = yes; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test "$lib_linked" != yes; then
+ $echo "$modename: configuration error: unsupported hardcode properties"
+ exit 1
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case ":$compile_shlibpath:" in
+ *":$add_shlibpath:"*) ;;
+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+ esac
+ fi
+ if test $linkmode = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test "$hardcode_direct" != yes && \
+ test "$hardcode_minus_L" != yes && \
+ test "$hardcode_shlibpath_var" = yes; then
+ case ":$finalize_shlibpath:" in
+ *":$libdir:"*) ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+ if test $linkmode = prog || test "$mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
+ if test "$hardcode_direct" = yes; then
+ add="$libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$libdir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case ":$finalize_shlibpath:" in
+ *":$libdir:"*) ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ esac
+ add="-l$name"
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
+ add="-l$name"
+ fi
+
+ if test $linkmode = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+ elif test $linkmode = prog; then
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test "$hardcode_direct" != unsupported; then
+ test -n "$old_library" && linklib="$old_library"
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ else
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ fi
+ elif test "$build_libtool_libs" = yes; then
+ # Not a shared library
+ if test "$deplibs_check_method" != pass_all; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ echo
+ echo "*** Warning: This library needs some functionality provided by $lib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ else
+ convenience="$convenience $dir/$old_library"
+ old_convenience="$old_convenience $dir/$old_library"
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi
+
+ if test $linkmode = lib; then
+ if test -n "$dependency_libs" &&
+ { test "$hardcode_into_libs" = no || test $build_old_libs = yes ||
+ test $link_static = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case "$libdir" in
+ -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) xrpath="$xrpath $temp_xrpath";;
+ esac;;
+ *) temp_deplibs="$temp_deplibs $libdir";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
+
+ newlib_search_path="$newlib_search_path $absdir"
+ # Link against this library
+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ tmp_libs="$tmp_libs $deplib"
+ done
+
+ if test $link_all_deplibs != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ case "$deplib" in
+ -L*) path="$deplib" ;;
+ *.la)
+ dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$dir" = "X$deplib" && dir="."
+ # We need an absolute path.
+ case "$dir" in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+ absdir="$dir"
+ fi
+ ;;
+ esac
+ if grep "^installed=no" $deplib > /dev/null; then
+ path="-L$absdir/$objdir"
+ else
+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+ exit 1
+ fi
+ if test "$absdir" != "$libdir"; then
+ $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+ fi
+ path="-L$absdir"
+ fi
+ ;;
+ *) continue ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ done
+ fi
+ fi
+ done
+ dependency_libs="$newdependency_libs"
+ if test $pass = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+ if test $pass != dlopen; then
+ if test $pass != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) lib_search_path="$lib_search_path $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ fi
+
+ if test "$linkmode,$pass" != "prog,link"; then
+ vars="deplibs"
+ else
+ vars="compile_deplibs finalize_deplibs"
+ fi
+ for var in $vars dependency_libs; do
+ # Make sure that $var contains only unique libraries
+ # and add them in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ case "$deplib" in
+ -L*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case "$deplib" in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) tmp_libs="$tmp_libs $deplib" ;;
+ esac
+ ;;
+ *) tmp_libs="$tmp_libs $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done
+ fi
+ done
+ if test $linkmode = prog; then
+ dlfiles="$newdlfiles"
+ dlprefiles="$newdlprefiles"
+ fi
+
+ case $linkmode in
+ oldlib)
+ if test -n "$deplibs"; then
+ $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+ fi
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$rpath"; then
+ $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$xrpath"; then
+ $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+ fi
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs="$output"
+ objs="$objs$old_deplibs"
+ ;;
+
+ lib)
+ # Make sure we only generate libraries of the form `libNAME.la'.
+ case "$outputname" in
+ lib*)
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ if test "$module" = no; then
+ $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+ eval libname=\"$libname_spec\"
+ else
+ libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+ fi
+ ;;
+ esac
+
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+ exit 1
+ else
+ echo
+ echo "*** Warning: Linking the shared library $output against the non-libtool"
+ echo "*** objects $objs is not portable!"
+ libobjs="$libobjs $objs"
+ fi
+ fi
+
+ if test "$dlself" != no; then
+ $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+ fi
+
+ set dummy $rpath
+ if test $# -gt 2; then
+ $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+ fi
+ install_libdir="$2"
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test "$build_libtool_libs" = yes; then
+ # Building a libtool convenience library.
+ # Some compilers have problems with a `.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+ fi
+ else
+
+ # Parse the version information argument.
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ IFS="$save_ifs"
+
+ if test -n "$8"; then
+ $echo "$modename: too many parameters to \`-version-info'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ current="$2"
+ revision="$3"
+ age="$4"
+
+ # Check that each of the things are valid numbers.
+ case "$current" in
+ 0 | [1-9] | [1-9][0-9]*) ;;
+ *)
+ $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case "$revision" in
+ 0 | [1-9] | [1-9][0-9]*) ;;
+ *)
+ $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case "$age" in
+ 0 | [1-9] | [1-9][0-9]*) ;;
+ *)
+ $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
+
+ if test $age -gt $current; then
+ $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case "$version_type" in
+ none) ;;
+
+ irix)
+ major=`expr $current - $age + 1`
+ verstring="sgi$major.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test $loop != 0; do
+ iface=`expr $revision - $loop`
+ loop=`expr $loop - 1`
+ verstring="sgi$major.$iface:$verstring"
+ done
+
+ # Before this point, $major must not contain `.'.
+ major=.$major
+ versuffix="$major.$revision"
+ ;;
+
+ linux)
+ major=.`expr $current - $age`
+ versuffix="$major.$age.$revision"
+ ;;
+
+ osf)
+ major=`expr $current - $age`
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test $loop != 0; do
+ iface=`expr $current - $loop`
+ loop=`expr $loop - 1`
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ verstring="$verstring:${current}.0"
+ ;;
+
+ sunos)
+ major=".$current"
+ versuffix=".$current.$revision"
+ ;;
+
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current";
+ ;;
+
+ windows)
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 filesystems.
+ major=`expr $current - $age`
+ versuffix="-$major"
+ ;;
+
+ *)
+ $echo "$modename: unknown library version type \`$version_type'" 1>&2
+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ exit 1
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ verstring="0.0"
+ if test "$need_version" = no; then
+ versuffix=
+ else
+ versuffix=".0.0"
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test "$avoid_version" = yes && test "$need_version" = no; then
+ major=
+ versuffix=
+ verstring=""
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test "$allow_undefined" = yes; then
+ if test "$allow_undefined_flag" = unsupported; then
+ $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
+ fi
+ fi
+
+ if test "$mode" != relink; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`echo "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case "$p" in
+ *.$objext)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ removelist="$removelist $p"
+ ;;
+ *) ;;
+ esac
+ done
+ if test -n "$removelist"; then
+ $show "${rm}r $removelist"
+ $run ${rm}r $removelist
+ fi
+ fi
+
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+ fi
+
+ # Eliminate all temporary directories.
+ for path in $uninst_path; do
+ lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
+ deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
+ dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
+ done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ temp_xrpath="$temp_xrpath -R$libdir"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+ if test "$hardcode_into_libs" = no || test $build_old_libs = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+
+ # Make sure dlfiles contains only unique files that won't be dlpreopened
+ old_dlfiles="$dlfiles"
+ dlfiles=
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+ *) dlfiles="$dlfiles $lib" ;;
+ esac
+ done
+
+ # Make sure dlprefiles contains only unique files
+ old_dlprefiles="$dlprefiles"
+ dlprefiles=
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+ *) dlprefiles="$dlprefiles $lib" ;;
+ esac
+ done
+
+ if test "$build_libtool_libs" = yes; then
+ if test -n "$rpath"; then
+ case "$host" in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test $build_libtool_need_lc = "yes"; then
+ deplibs="$deplibs -lc"
+ fi
+ ;;
+ esac
+ fi
+
+ # Transform deplibs into only deplibs that can be linked in shared.
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=""
+ versuffix=""
+ major=""
+ newdeplibs=
+ droppeddeps=no
+ case "$deplibs_check_method" in
+ pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behaviour.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $rm conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $rm conftest
+ $LTCC -o conftest conftest.c $deplibs
+ if test $? -eq 0 ; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+ name="`expr $i : '-l\(.*\)'`"
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" -a "$name" != "0"; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
+ set dummy $deplib_matches
+ deplib_match=$2
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ droppeddeps=yes
+ echo
+ echo "*** Warning: This library needs some functionality provided by $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ fi
+ else
+ newdeplibs="$newdeplibs $i"
+ fi
+ done
+ else
+ # Error occured in the first compile. Let's try to salvage the situation:
+ # Compile a seperate program for each library.
+ for i in $deplibs; do
+ name="`expr $i : '-l\(.*\)'`"
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" -a "$name" != "0"; then
+ $rm conftest
+ $LTCC -o conftest conftest.c $i
+ # Did it work?
+ if test $? -eq 0 ; then
+ ldd_output=`ldd conftest`
+ libname=`eval \\$echo \"$libname_spec\"`
+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
+ set dummy $deplib_matches
+ deplib_match=$2
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ droppeddeps=yes
+ echo
+ echo "*** Warning: This library needs some functionality provided by $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ fi
+ else
+ droppeddeps=yes
+ echo
+ echo "*** Warning! Library $i is needed by this library but I was not able to"
+ echo "*** make it link in! You will probably need to install it or some"
+ echo "*** library that it depends on before this library will be fully"
+ echo "*** functional. Installing it before continuing would be even better."
+ fi
+ else
+ newdeplibs="$newdeplibs $i"
+ fi
+ done
+ fi
+ ;;
+ file_magic*)
+ set dummy $deplibs_check_method
+ file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ for a_deplib in $deplibs; do
+ name="`expr $a_deplib : '-l\(.*\)'`"
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" -a "$name" != "0"; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null \
+ | grep " -> " >/dev/null; then
+ continue
+ fi
+ # The statement above tries to avoid entering an
+ # endless loop below, in case of cyclic links.
+ # We might still enter an endless loop, since a link
+ # loop can be closed while we follow links,
+ # but so what?
+ potlib="$potent_lib"
+ while test -h "$potlib" 2>/dev/null; do
+ potliblink=`ls -ld $potlib | sed 's/.* -> //'`
+ case "$potliblink" in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+ *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+ | sed 10q \
+ | egrep "$file_magic_regex" > /dev/null; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ echo "*** Warning: This library needs some functionality provided by $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ fi
+ else
+ # Add a -L argument.
+ newdeplibs="$newdeplibs $a_deplib"
+ fi
+ done # Gone through all deplibs.
+ ;;
+ none | unknown | *)
+ newdeplibs=""
+ if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+ -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' |
+ grep . >/dev/null; then
+ echo
+ if test "X$deplibs_check_method" = "Xnone"; then
+ echo "*** Warning: inter-library dependencies are not supported in this platform."
+ else
+ echo "*** Warning: inter-library dependencies are not known to be supported."
+ fi
+ echo "*** All declared inter-library dependencies are being dropped."
+ droppeddeps=yes
+ fi
+ ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+
+ if test "$droppeddeps" = yes; then
+ if test "$module" = yes; then
+ echo
+ echo "*** Warning: libtool could not satisfy all declared inter-library"
+ echo "*** dependencies of module $libname. Therefore, libtool will create"
+ echo "*** a static module, that should work as long as the dlopening"
+ echo "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ else
+ echo "*** The inter-library dependencies that have been dropped here will be"
+ echo "*** automatically added whenever a program is linked with this library"
+ echo "*** or is declared to -dlopen it."
+ fi
+ fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
+ if test "$build_libtool_libs" = yes; then
+ if test "$hardcode_into_libs" != no; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+ test "$mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ dep_rpath="$dep_rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) perm_rpath="$perm_rpath $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
+
+ shlibpath="$finalize_shlibpath"
+ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ if test -n "$shlibpath"; then
+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ fi
+
+ # Get the real and link names of the library.
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ realname="$2"
+ shift; shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ lib="$output_objdir/$realname"
+ for link
+ do
+ linknames="$linknames $link"
+ done
+
+# # Ensure that we have .o objects for linkers which dislike .lo
+# # (e.g. aix) in case we are running --disable-static
+# for obj in $libobjs; do
+# xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+# if test "X$xdir" = "X$obj"; then
+# xdir="."
+# else
+# xdir="$xdir"
+# fi
+# baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+# oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+# if test ! -f $xdir/$oldobj && test "$baseobj" != "$oldobj"; then
+# $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
+# $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
+# fi
+# done
+
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+ $show "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $run $rm $export_symbols
+ eval cmds=\"$export_symbols_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ if test -n "$export_symbols_regex"; then
+ $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+ $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+ $run eval '$mv "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+ fi
+
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+ fi
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ else
+ gentop="$output_objdir/${outputname}x"
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ $show "$mkdir $gentop"
+ $run $mkdir "$gentop"
+ status=$?
+ if test $status -ne 0 && test ! -d "$gentop"; then
+ exit $status
+ fi
+ generated="$generated $gentop"
+
+ for xlib in $convenience; do
+ # Extract the objects.
+ case "$xlib" in
+ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+ *) xabs=`pwd`"/$xlib" ;;
+ esac
+ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+ xdir="$gentop/$xlib"
+
+ $show "${rm}r $xdir"
+ $run ${rm}r "$xdir"
+ $show "$mkdir $xdir"
+ $run $mkdir "$xdir"
+ status=$?
+ if test $status -ne 0 && test ! -d "$xdir"; then
+ exit $status
+ fi
+ $show "(cd $xdir && $AR x $xabs)"
+ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+ libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+ done
+ fi
+ fi
+
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ linker_flags="$linker_flags $flag"
+ fi
+
+ # Make a backup of the uninstalled library when relinking
+ if test "$mode" = relink && test "$hardcode_into_libs" = all; then
+ $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+ fi
+
+ # Do each of the archive commands.
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval cmds=\"$archive_expsym_cmds\"
+ else
+ eval cmds=\"$archive_cmds\"
+ fi
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink && test "$hardcode_into_libs" = all; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+ exit 0
+ fi
+
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+ $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test "$module" = yes || test "$export_dynamic" = yes; then
+ # On all known operating systems, these are identical.
+ dlname="$soname"
+ fi
+ fi
+ ;;
+
+ obj)
+ if test -n "$deplibs"; then
+ $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+ fi
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+ fi
+
+ if test -n "$rpath"; then
+ $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+ fi
+
+ if test -n "$xrpath"; then
+ $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+ fi
+
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+ fi
+
+ case "$output" in
+ *.lo)
+ if test -n "$objs$old_deplibs"; then
+ $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+ exit 1
+ fi
+ libobj="$output"
+ obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+ ;;
+ *)
+ libobj=
+ obj="$output"
+ ;;
+ esac
+
+ # Delete the old objects.
+ $run $rm $obj $libobj
+
+ # Objects from convenience libraries. This assumes
+ # single-version convenience libraries. Whenever we create
+ # different ones for PIC/non-PIC, this we'll have to duplicate
+ # the extraction.
+ reload_conv_objs=
+ gentop=
+ # reload_cmds runs $LD directly, so let us get rid of
+ # -Wl from whole_archive_flag_spec
+ wl=
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+ else
+ gentop="$output_objdir/${obj}x"
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ $show "$mkdir $gentop"
+ $run $mkdir "$gentop"
+ status=$?
+ if test $status -ne 0 && test ! -d "$gentop"; then
+ exit $status
+ fi
+ generated="$generated $gentop"
+
+ for xlib in $convenience; do
+ # Extract the objects.
+ case "$xlib" in
+ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+ *) xabs=`pwd`"/$xlib" ;;
+ esac
+ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+ xdir="$gentop/$xlib"
+
+ $show "${rm}r $xdir"
+ $run ${rm}r "$xdir"
+ $show "$mkdir $xdir"
+ $run $mkdir "$xdir"
+ status=$?
+ if test $status -ne 0 && test ! -d "$xdir"; then
+ exit $status
+ fi
+ $show "(cd $xdir && $AR x $xabs)"
+ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+ reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+ done
+ fi
+ fi
+
+ # Create the old-style object.
+ reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+ output="$obj"
+ eval cmds=\"$reload_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+
+ # Exit if we aren't doing a library object file.
+ if test -z "$libobj"; then
+ if test -n "$gentop"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r $gentop
+ fi
+
+ exit 0
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+ if test -n "$gentop"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r $gentop
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $run eval "echo timestamp > $libobj" || exit $?
+ exit 0
+ fi
+
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+ eval cmds=\"$reload_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+# else
+# # Just create a symlink.
+# $show $rm $libobj
+# $run $rm $libobj
+# xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+# if test "X$xdir" = "X$libobj"; then
+# xdir="."
+# else
+# xdir="$xdir"
+# fi
+# baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+# oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+# $show "(cd $xdir && $LN_S $oldobj $baseobj)"
+# $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
+ fi
+
+ if test -n "$gentop"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r $gentop
+ fi
+
+ exit 0
+ ;;
+
+ prog)
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+ fi
+
+ if test "$preload" = yes; then
+ if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+ test "$dlopen_self_static" = unknown; then
+ $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+ fi
+ fi
+
+ compile_command="$compile_command $compile_deplibs"
+ finalize_command="$finalize_command $finalize_deplibs"
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath $xrpath; do
+ # This is the magic to use -rpath.
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+ fi
+
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ rpath="$rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) perm_rpath="$perm_rpath $libdir" ;;
+ esac
+ fi
+ case "$host" in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ case ":$dllsearchpath:" in
+ *":$libdir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$libdir";;
+ esac
+ ;;
+ esac
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath="$rpath"
+
+ rpath=
+ hardcode_libdirs=
+ for libdir in $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ rpath="$rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath="$rpath"
+
+ dlsyms=
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ dlsyms="${outputname}S.c"
+ else
+ $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+ fi
+ fi
+
+ if test -n "$dlsyms"; then
+ case "$dlsyms" in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${outputname}.nm"
+
+ $show "$rm $nlist ${nlist}S ${nlist}T"
+ $run $rm "$nlist" "${nlist}S" "${nlist}T"
+
+ # Parse the name list into a source file.
+ $show "creating $output_objdir/$dlsyms"
+
+ test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define lt_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ $show "generating symbol list for \`$output'"
+
+ test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles="$objs$old_deplibs"
+ for arg in $progfiles; do
+ $show "extracting global C symbols from \`$arg'"
+ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ $run eval '$mv "$nlist"T "$nlist"'
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ $run eval '$mv "$nlist"T "$nlist"'
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$output.exp"
+ $run $rm $export_symbols
+ $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ else
+ $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+ $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+ $run eval 'mv "$nlist"T "$nlist"'
+ fi
+ fi
+
+ for arg in $dlprefiles; do
+ $show "extracting global C symbols from \`$arg'"
+ name=`echo "$arg" | sed -e 's%^.*/%%'`
+ $run eval 'echo ": $name " >> "$nlist"'
+ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -z "$run"; then
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $mv "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
+ :
+ else
+ grep -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+ else
+ echo '/* NONE */' >> "$output_objdir/$dlsyms"
+ fi
+
+ $echo >> "$output_objdir/$dlsyms" "\
+
+#undef lt_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{\
+"
+
+ sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \
+ -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \
+ < "$nlist" >> "$output_objdir/$dlsyms"
+
+ $echo >> "$output_objdir/$dlsyms" "\
+ {0, (lt_ptr_t) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ fi
+
+ pic_flag_for_symtable=
+ case "$host" in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ case "$compile_command " in
+ *" -static "*) ;;
+ *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
+ esac;;
+ *-*-hpux*)
+ case "$compile_command " in
+ *" -static "*) ;;
+ *) pic_flag_for_symtable=" $pic_flag";;
+ esac
+ esac
+
+ # Now compile the dynamic symbol file.
+ $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+ $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+ # Clean up the generated files.
+ $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+ $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+ # Transform the symbol file into the correct name.
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ ;;
+ *)
+ $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+ exit 1
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ fi
+
+ # AIX runtime linking requires linking programs with -Wl,-brtl and libs with -Wl,-G
+ case "$host" in
+ *-*-aix4*) compile_command="$compile_command $wl-brtl"
+ finalize_command="$finalize_command $wl-brtl" ;;
+ esac
+
+ if test $need_relink = no || test "$build_libtool_libs" != yes; then
+ # Replace the output file specification.
+ compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ link_command="$compile_command$compile_rpath"
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ $show "$link_command"
+ $run eval "$link_command"
+ status=$?
+
+ # Delete the generated files.
+ if test -n "$dlsyms"; then
+ $show "$rm $output_objdir/${outputname}S.${objext}"
+ $run $rm "$output_objdir/${outputname}S.${objext}"
+ fi
+
+ exit $status
+ fi
+
+ if test -n "$shlibpath_var"; then
+ # We should set the shlibpath_var
+ rpath=
+ for dir in $temp_rpath; do
+ case "$dir" in
+ [\\/]* | [A-Za-z]:[\\/]*)
+ # Absolute path.
+ rpath="$rpath$dir:"
+ ;;
+ *)
+ # Relative path: add a thisdir entry.
+ rpath="$rpath\$thisdir/$dir:"
+ ;;
+ esac
+ done
+ temp_rpath="$rpath"
+ fi
+
+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+ fi
+ if test -n "$finalize_shlibpath"; then
+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+ fi
+
+ compile_var=
+ finalize_var=
+ if test -n "$runpath_var"; then
+ if test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ if test -n "$finalize_perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ fi
+
+ if test "$no_install" = yes; then
+ # We don't need to create a wrapper script.
+ link_command="$compile_var$compile_command$compile_rpath"
+ # Replace the output file specification.
+ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ # Delete the old output file.
+ $run $rm $output
+ # Link the executable and exit
+ $show "$link_command"
+ $run eval "$link_command" || exit $?
+ exit 0
+ fi
+
+ if test "$hardcode_action" = relink || test "$hardcode_into_libs" = all; then
+ # Fast installation is not supported
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+ $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+ $echo "$modename: \`$output' will be relinked during installation" 1>&2
+ else
+ if test "$fast_install" != no; then
+ link_command="$finalize_var$compile_command$finalize_rpath"
+ if test "$fast_install" = yes; then
+ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+ else
+ # fast_install is set to needless
+ relink_command=
+ fi
+ else
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+ fi
+ fi
+
+ # Replace the output file specification.
+ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+ # Delete the old output files.
+ $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+ $show "$link_command"
+ $run eval "$link_command" || exit $?
+
+ # Now create the wrapper script.
+ $show "creating $output"
+
+ # Quote the relink command for shipping.
+ if test -n "$relink_command"; then
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+ relink_command="$var=\"$var_value\"; export $var; $relink_command"
+ fi
+ done
+ relink_command="cd `pwd`; $relink_command"
+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ fi
+
+ # Quote $echo for shipping.
+ if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+ case "$0" in
+ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+ *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+ esac
+ qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+ else
+ qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+ fi
+
+ # Only actually do things if our run command is non-null.
+ if test -z "$run"; then
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+ *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
+ esac
+ $rm $output
+ trap "$rm $output; exit 1" 1 2 15
+
+ $echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variable:
+ uninst_deplibs='$uninst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$echo are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ echo=\"$qecho\"
+ file=\"\$0\"
+ # Make sure echo works.
+ if test \"X\$1\" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+ elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+ # Yippee, \$echo works!
+ :
+ else
+ # Restart under the correct shell, and then maybe \$echo will work.
+ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+ fi
+ fi\
+"
+ $echo >> $output "\
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+ done
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ echo >> $output "\
+ program=lt-'$outputname'
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" || \\
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $mkdir \"\$progdir\"
+ else
+ $rm \"\$progdir/\$file\"
+ fi"
+
+ echo >> $output "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if (eval \$relink_command); then :
+ else
+ $rm \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $rm \"\$progdir/\$program\";
+ $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $rm \"\$progdir/\$file\"
+ fi"
+ else
+ echo >> $output "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ echo >> $output "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $echo >> $output "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ # fixup the dll searchpath if we need to.
+ if test -n "$dllsearchpath"; then
+ $echo >> $output "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ $echo >> $output "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+"
+ case $host in
+ # win32 systems need to use the prog path for dll
+ # lookup to work
+ *-*-cygwin* | *-*-pw32*)
+ $echo >> $output "\
+ exec \$progdir/\$program \${1+\"\$@\"}
+"
+ ;;
+
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2*)
+ $echo >> $output "\
+ exec \$progdir\\\\\$program \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $echo >> $output "\
+ # Export the path to the program.
+ PATH=\"\$progdir:\$PATH\"
+ export PATH
+
+ exec \$program \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $echo >> $output "\
+ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+ exit 1
+ fi
+ else
+ # The program doesn't exist.
+ \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+ \$echo \"This script is just a wrapper for \$program.\" 1>&2
+ echo \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+ chmod +x $output
+ fi
+ exit 0
+ ;;
+ esac
+
+ # See if we need to build an old-fashioned archive.
+ for oldlib in $oldlibs; do
+
+ if test "$build_libtool_libs" = convenience; then
+ oldobjs="$libobjs_save"
+ addlibs="$convenience"
+ build_libtool_libs=no
+ else
+ if test "$build_libtool_libs" = module; then
+ oldobjs="$libobjs_save"
+ build_libtool_libs=no
+ else
+ oldobjs="$objs$old_deplibs $non_pic_objects"
+ fi
+ addlibs="$old_convenience"
+ fi
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ $show "$mkdir $gentop"
+ $run $mkdir "$gentop"
+ status=$?
+ if test $status -ne 0 && test ! -d "$gentop"; then
+ exit $status
+ fi
+ generated="$generated $gentop"
+
+ # Add in members from convenience archives.
+ for xlib in $addlibs; do
+ # Extract the objects.
+ case "$xlib" in
+ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+ *) xabs=`pwd`"/$xlib" ;;
+ esac
+ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+ xdir="$gentop/$xlib"
+
+ $show "${rm}r $xdir"
+ $run ${rm}r "$xdir"
+ $show "$mkdir $xdir"
+ $run $mkdir "$xdir"
+ status=$?
+ if test $status -ne 0 && test ! -d "$xdir"; then
+ exit $status
+ fi
+ $show "(cd $xdir && $AR x $xabs)"
+ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+ oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print | $NL2SP`
+ done
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ eval cmds=\"$old_archive_from_new_cmds\"
+ else
+# # Ensure that we have .o objects in place in case we decided
+# # not to build a shared library, and have fallen back to building
+# # static libs even though --disable-static was passed!
+# for oldobj in $oldobjs; do
+# if test ! -f $oldobj; then
+# xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
+# if test "X$xdir" = "X$oldobj"; then
+# xdir="."
+# else
+# xdir="$xdir"
+# fi
+# baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
+# obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+# $show "(cd $xdir && ${LN_S} $obj $baseobj)"
+# $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
+# fi
+# done
+
+ eval cmds=\"$old_archive_cmds\"
+ fi
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ done
+
+ if test -n "$generated"; then
+ $show "${rm}r$generated"
+ $run ${rm}r$generated
+ fi
+
+ # Now create the libtool archive.
+ case "$output" in
+ *.la)
+ old_library=
+ test "$build_old_libs" = yes && old_library="$libname.$libext"
+ $show "creating $output"
+
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+ relink_command="$var=\"$var_value\"; export $var; $relink_command"
+ fi
+ done
+ # Quote the link command for shipping.
+ relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args"
+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+
+ # Only create the output if not a dry run.
+ if test -z "$run"; then
+ for installed in no yes; do
+ if test "$installed" = yes; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output="$output_objdir/$outputname"i
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
+ case "$deplib" in
+ *.la)
+ name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+ exit 1
+ fi
+ newdependency_libs="$newdependency_libs $libdir/$name"
+ ;;
+ *) newdependency_libs="$newdependency_libs $deplib" ;;
+ esac
+ done
+ dependency_libs="$newdependency_libs"
+ newdlfiles=
+ for lib in $dlfiles; do
+ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ exit 1
+ fi
+ newdlfiles="$newdlfiles $libdir/$name"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ exit 1
+ fi
+ newdlprefiles="$newdlprefiles $libdir/$name"
+ done
+ dlprefiles="$newdlprefiles"
+ fi
+ $rm $output
+ $echo > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$dlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+ if test $hardcode_into_libs = all &&
+ test "$installed" = no && test $need_relink = yes; then
+ $echo >> $output "\
+relink_command=\"$relink_command\""
+ fi
+ done
+ fi
+
+ # Do a symbolic link so that the libtool archive can be found in
+ # LD_LIBRARY_PATH before the program is installed.
+ $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+ ;;
+ esac
+ exit 0
+ ;;
+
+ # libtool install mode
+ install)
+ modename="$modename: install"
+
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+ $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
+ # Aesthetically quote it.
+ arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ arg="\"$arg\""
+ ;;
+ esac
+ install_prog="$arg "
+ arg="$1"
+ shift
+ else
+ install_prog=
+ arg="$nonopt"
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ arg="\"$arg\""
+ ;;
+ esac
+ install_prog="$install_prog$arg"
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=no
+ stripme=
+ for arg
+ do
+ if test -n "$dest"; then
+ files="$files $dest"
+ dest="$arg"
+ continue
+ fi
+
+ case "$arg" in
+ -d) isdir=yes ;;
+ -f) prev="-f" ;;
+ -g) prev="-g" ;;
+ -m) prev="-m" ;;
+ -o) prev="-o" ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*) ;;
+
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ prev=
+ else
+ dest="$arg"
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ arg="\"$arg\""
+ ;;
+ esac
+ install_prog="$install_prog $arg"
+ done
+
+ if test -z "$install_prog"; then
+ $echo "$modename: you must specify an install program" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ if test -n "$prev"; then
+ $echo "$modename: the \`$prev' option requires an argument" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ $echo "$modename: no file or destination specified" 1>&2
+ else
+ $echo "$modename: you must specify a destination" 1>&2
+ fi
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ # Strip any trailing slash from the destination.
+ dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=yes
+ if test "$isdir" = yes; then
+ destdir="$dest"
+ destname=
+ else
+ destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$destdir" = "X$dest" && destdir=.
+ destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files
+ if test $# -gt 2; then
+ $echo "$modename: \`$dest' is not a directory" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+ fi
+ case "$destdir" in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case "$file" in
+ *.lo) ;;
+ *)
+ $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case "$file" in
+ *.$libext)
+ # Do the static libraries later.
+ staticlibs="$staticlibs $file"
+ ;;
+
+ *.la)
+ # Check to see that this really is a libtool archive.
+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ library_names=
+ old_library=
+ relink_command=
+ # If there is no directory component, then add one.
+ case "$file" in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) current_libdirs="$current_libdirs $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) future_libdirs="$future_libdirs $libdir" ;;
+ esac
+ fi
+
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
+ test "X$dir" = "X$file/" && dir=
+ dir="$dir$objdir"
+
+ if test "$hardcode_into_libs" = all && test -n "$relink_command"; then
+ $echo "$modename: warning: relinking \`$file'" 1>&2
+ $show "$relink_command"
+ if $run eval "$relink_command"; then :
+ else
+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+ continue
+ fi
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names
+ if test -n "$2"; then
+ realname="$2"
+ shift
+ shift
+
+ srcname="$realname"
+ test "$hardcode_into_libs" = all && test -n "$relink_command" && srcname="$realname"T
+
+ # Install the shared library and build the symlinks.
+ $show "$install_prog $dir/$srcname $destdir/$realname"
+ $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+ if test -n "$stripme" && test -n "$striplib"; then
+ $show "$striplib $destdir/$realname"
+ $run eval "$striplib $destdir/$realname" || exit $?
+ fi
+
+ if test $# -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ for linkname
+ do
+ if test "$linkname" != "$realname"; then
+ $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+ $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+ fi
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ eval cmds=\"$postinstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ fi
+
+ # Install the pseudo-library for information purposes.
+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ instname="$dir/$name"i
+ $show "$install_prog $instname $destdir/$name"
+ $run eval "$install_prog $instname $destdir/$name" || exit $?
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ destfile="$destdir/$destfile"
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case "$destfile" in
+ *.lo)
+ staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+ ;;
+ *.$objext)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ if test -n "$destfile"; then
+ $show "$install_prog $file $destfile"
+ $run eval "$install_prog $file $destfile" || exit $?
+ fi
+
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+ $show "$install_prog $staticobj $staticdest"
+ $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+ fi
+ exit 0
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ destfile="$destdir/$destfile"
+ fi
+
+ # Do a test to see if this is really a libtool program.
+ if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ uninst_deplibs=
+ relink_command=
+
+ # If there is no directory component, then add one.
+ case "$file" in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
+ # Check the variables that should have been set.
+ if test -z "$uninst_deplibs"; then
+ $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
+ exit 1
+ fi
+
+ finalize=yes
+ for lib in $uninst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ # If there is no directory component, then add one.
+ case "$lib" in
+ */* | *\\*) . $lib ;;
+ *) . ./$lib ;;
+ esac
+ fi
+ libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+ finalize=no
+ fi
+ done
+
+ relink_command=
+ # If there is no directory component, then add one.
+ case "$file" in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ if test "$finalize" = yes && test -z "$run"; then
+ tmpdir="/tmp"
+ test -n "$TMPDIR" && tmpdir="$TMPDIR"
+ tmpdir="$tmpdir/libtool-$$"
+ if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+ else
+ $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+ continue
+ fi
+ file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+ $show "$relink_command"
+ if $run eval "$relink_command"; then :
+ else
+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+ ${rm}r "$tmpdir"
+ continue
+ fi
+ file="$outputname"
+ else
+ $echo "$modename: warning: cannot relink \`$file'" 1>&2
+ fi
+ else
+ # Install the binary that we compiled earlier.
+ file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ $show "$install_prog$stripme $file $destfile"
+ $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+ test -n "$outputname" && ${rm}r "$tmpdir"
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+ # Set up the ranlib parameters.
+ oldlib="$destdir/$name"
+
+ $show "$install_prog $file $oldlib"
+ $run eval "$install_prog \$file \$oldlib" || exit $?
+
+ if test -n "$stripme" && test -n "$striplib"; then
+ $show "$old_striplib $oldlib"
+ $run eval "$old_striplib $oldlib" || exit $?
+ fi
+
+ # Do each command in the postinstall commands.
+ eval cmds=\"$old_postinstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ done
+
+ if test -n "$future_libdirs"; then
+ $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+ fi
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ test -n "$run" && current_libdirs=" -n$current_libdirs"
+ exec $SHELL $0 --finish$current_libdirs
+ exit 1
+ fi
+
+ exit 0
+ ;;
+
+ # libtool finish mode
+ finish)
+ modename="$modename: finish"
+ libdirs="$nonopt"
+ admincmds=
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for dir
+ do
+ libdirs="$libdirs $dir"
+ done
+
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ eval cmds=\"$finish_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || admincmds="$admincmds
+ $cmd"
+ done
+ IFS="$save_ifs"
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $run eval "$cmds" || admincmds="$admincmds
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ test "$show" = : && exit 0
+
+ echo "----------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ echo " $libdir"
+ done
+ echo
+ echo "If you ever happen to want to link against installed libraries"
+ echo "in a given directory, LIBDIR, you must either use libtool, and"
+ echo "specify the full pathname of the library, or use \`-LLIBDIR'"
+ echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ echo " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ echo " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ echo
+ echo "See any operating system documentation about shared libraries for"
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ echo "----------------------------------------------------------------------"
+ exit 0
+ ;;
+
+ # libtool execute mode
+ execute)
+ modename="$modename: execute"
+
+ # The first argument is the command name.
+ cmd="$nonopt"
+ if test -z "$cmd"; then
+ $echo "$modename: you must specify a COMMAND" 1>&2
+ $echo "$help"
+ exit 1
+ fi
+
+ # Handle -dlopen flags immediately.
+ for file in $execute_dlfiles; do
+ if test ! -f "$file"; then
+ $echo "$modename: \`$file' is not a file" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ dir=
+ case "$file" in
+ *.la)
+ # Check to see that this really is a libtool archive.
+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+
+ # If there is no directory component, then add one.
+ case "$file" in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$dir" = "X$file" && dir=.
+
+ if test -f "$dir/$objdir/$dlname"; then
+ dir="$dir/$objdir"
+ else
+ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+ exit 1
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$dir" = "X$file" && dir=.
+ ;;
+
+ *)
+ $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case "$file" in
+ -*) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ # If there is no directory component, then add one.
+ case "$file" in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+ args="$args \"$file\""
+ done
+
+ if test -z "$run"; then
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved enviroment variables
+ if test "${save_LC_ALL+set}" = set; then
+ LC_ALL="$save_LC_ALL"; export LC_ALL
+ fi
+ if test "${save_LANG+set}" = set; then
+ LANG="$save_LANG"; export LANG
+ fi
+
+ # Now actually exec the command.
+ eval "exec \$cmd$args"
+
+ $echo "$modename: cannot exec \$cmd$args"
+ exit 1
+ else
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+ $echo "export $shlibpath_var"
+ fi
+ $echo "$cmd$args"
+ exit 0
+ fi
+ ;;
+
+ # libtool clean and uninstall mode
+ clean | uninstall)
+ modename="$modename: $mode"
+ rm="$nonopt"
+ files=
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ for arg
+ do
+ case "$arg" in
+ -*) rm="$rm $arg" ;;
+ *) files="$files $arg" ;;
+ esac
+ done
+
+ if test -z "$rm"; then
+ $echo "$modename: you must specify an RM program" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ for file in $files; do
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$dir" = "X$file"; then
+ dir=.
+ objdir="$objdir"
+ else
+ objdir="$dir/$objdir"
+ fi
+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ test $mode = uninstall && objdir="$dir"
+
+ rmfiles="$file"
+
+ case "$name" in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ . $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ rmfiles="$rmfiles $objdir/$n"
+ done
+ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+ test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+
+ if test $mode = uninstall; then
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ eval cmds=\"$postuninstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd"
+ done
+ IFS="$save_ifs"
+ fi
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ eval cmds=\"$old_postuninstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd"
+ done
+ IFS="$save_ifs"
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+ fi
+ fi
+ ;;
+
+ *.lo)
+ # Possibly a libtool object, so verify it.
+ if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+
+ # Read the .lo file
+ . ./$file
+
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" \
+ && test "$pic_object" != none; then
+ rmfiles="$rmfiles $dir/$pic_object"
+ fi
+
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" \
+ && test "$non_pic_object" != none; then
+ rmfiles="$rmfiles $dir/$non_pic_object"
+ fi
+ fi
+ ;;
+
+ *)
+ # Do a test to see if this is a libtool program.
+ if test $mode = clean &&
+ (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ relink_command=
+ . $dir/$file
+
+ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+ if test "$fast_install" = yes && test -n "$relink_command"; then
+ rmfiles="$rmfiles $objdir/lt-$name"
+ fi
+ fi
+ ;;
+ esac
+ $show "$rm $rmfiles"
+ $run $rm $rmfiles
+ done
+ exit 0
+ ;;
+
+ "")
+ $echo "$modename: you must specify a MODE" 1>&2
+ $echo "$generic_help" 1>&2
+ exit 1
+ ;;
+ esac
+
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$generic_help" 1>&2
+ exit 1
+fi # test -z "$show_help"
+
+# We need to display help for each of the modes.
+case "$mode" in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+ --config show all configuration variables
+ --debug enable verbose shell tracing
+-n, --dry-run display commands without modifying any files
+ --features display basic configuration information and exit
+ --finish same as \`--mode=finish'
+ --help display this help message and exit
+ --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
+ --quiet same as \`--silent'
+ --silent don't print informational messages
+ --tag=TAG use configuration variables from tag TAG
+ --version print version information
+
+MODE must be one of the following:
+
+ clean remove files from the build directory
+ compile compile a source file into a libtool object
+ execute automatically set library path, then run a program
+ finish complete the installation of libtool libraries
+ install install libraries or executables
+ link create a library or an executable
+ uninstall remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE."
+ exit 0
+ ;;
+
+clean)
+ $echo \
+"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+compile)
+ $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -static always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+execute)
+ $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+finish)
+ $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+install)
+ $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+link)
+ $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -static do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+uninstall)
+ $echo \
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+*)
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+esac
+
+echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit 0
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries. Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them. This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration. But we'll never go from static-only to shared-only.
+
+### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+### END LIBTOOL TAG CONFIG: disable-shared
+
+### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
Added: kde-extras/kfocus/branches/upstream/current/admin/missing
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/missing 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/missing 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,238 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright (C) 1996, 1997, 1999 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+
+case "$1" in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing 0.2 - GNU automake"
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+ aclocal)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`acinclude.m4' or \`configure.in'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`configure.in'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`acconfig.h' or \`configure.in'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case "$f" in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f y.tab.h ]; then
+ echo >y.tab.h
+ fi
+ if [ ! -f y.tab.c ]; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f lex.yy.c ]; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ makeinfo)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+ fi
+ touch $file
+ ;;
+
+ tar)
+ shift
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ fi
+
+ # we have already tried tar in the generic part
+ gnutar ${1+"$@"} && exit 0
+ gtar ${1+"$@"} && exit 0
+ firstarg="$1"
+ if shift; then
+ case "$firstarg" in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" ${1+"$@"} && exit 0
+ ;;
+ esac
+ case "$firstarg" in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" ${1+"$@"} && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+ system. You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequirements for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
Property changes on: kde-extras/kfocus/branches/upstream/current/admin/missing
___________________________________________________________________
Name: svn:executable
+
Added: kde-extras/kfocus/branches/upstream/current/admin/mkinstalldirs
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/mkinstalldirs 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/mkinstalldirs 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,40 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman at prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+# $Id: mkinstalldirs,v 1.1.1.1 2001/08/28 19:09:09 wehjin Exp $
+
+errstatus=0
+
+for file
+do
+ set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+ shift
+
+ pathcomp=
+ for d
+ do
+ pathcomp="$pathcomp$d"
+ case "$pathcomp" in
+ -* ) pathcomp=./$pathcomp ;;
+ esac
+
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
+
+ mkdir "$pathcomp" || lasterr=$?
+
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ fi
+ fi
+
+ pathcomp="$pathcomp/"
+ done
+done
+
+exit $errstatus
+
+# mkinstalldirs ends here
Property changes on: kde-extras/kfocus/branches/upstream/current/admin/mkinstalldirs
___________________________________________________________________
Name: svn:executable
+
Added: kde-extras/kfocus/branches/upstream/current/admin/ylwrap
===================================================================
--- kde-extras/kfocus/branches/upstream/current/admin/ylwrap 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/admin/ylwrap 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,142 @@
+#! /bin/sh
+# ylwrap - wrapper for lex/yacc invocations.
+# Copyright (C) 1996, 1997, 1998, 1999 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey at cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Usage:
+# ylwrap PROGRAM INPUT [OUTPUT DESIRED]... -- [ARGS]...
+# * PROGRAM is program to run.
+# * INPUT is the input file
+# * OUTPUT is file PROG generates
+# * DESIRED is file we actually want
+# * ARGS are passed to PROG
+# Any number of OUTPUT,DESIRED pairs may be used.
+
+# The program to run.
+prog="$1"
+shift
+# Make any relative path in $prog absolute.
+case "$prog" in
+ /* | [A-Za-z]:*) ;;
+ */*) prog="`pwd`/$prog" ;;
+esac
+
+# The input.
+input="$1"
+shift
+case "$input" in
+ /* | [A-Za-z]:*)
+ # Absolute path; do nothing.
+ ;;
+ *)
+ # Relative path. Make it absolute. Why? Because otherwise any
+ # debugging info in the generated file will point to the wrong
+ # place. This is really gross.
+ input="`pwd`/$input"
+ ;;
+esac
+
+# We don't want to use the absolute path if the input in the current
+# directory like when making a tar ball.
+input_base=`echo $input | sed -e 's|.*/||'`
+if test -f $input_base && cmp $input_base $input >/dev/null 2>&1; then
+ input=$input_base
+fi
+
+pairlist=
+while test "$#" -ne 0; do
+ if test "$1" = "--"; then
+ shift
+ break
+ fi
+ pairlist="$pairlist $1"
+ shift
+done
+
+# FIXME: add hostname here for parallel makes that run commands on
+# other machines. But that might take us over the 14-char limit.
+dirname=ylwrap$$
+trap "cd `pwd`; rm -rf $dirname > /dev/null 2>&1" 1 2 3 15
+mkdir $dirname || exit 1
+
+cd $dirname
+case "$input" in
+ /* | [A-Za-z]:*)
+ # Absolute path; do nothing.
+ ;;
+ *)
+ # Make a symbolic link, hard link or hardcopy.
+ ln -s ../"$input" . > /dev/null 2>&1 || ln ../"$input" . > /dev/null 2>&1 || cp ../"$input" .
+ ;;
+esac
+$prog ${1+"$@"} "$input"
+status=$?
+
+if test $status -eq 0; then
+ set X $pairlist
+ shift
+ first=yes
+ # Since DOS filename conventions don't allow two dots,
+ # the DOS version of Bison writes out y_tab.c instead of y.tab.c
+ # and y_tab.h instead of y.tab.h. Test to see if this is the case.
+ y_tab_nodot="no"
+ if test -f y_tab.c || test -f y_tab.h; then
+ y_tab_nodot="yes"
+ fi
+
+ while test "$#" -ne 0; do
+ from="$1"
+ # Handle y_tab.c and y_tab.h output by DOS
+ if test $y_tab_nodot = "yes"; then
+ if test $from = "y.tab.c"; then
+ from="y_tab.c"
+ else
+ if test $from = "y.tab.h"; then
+ from="y_tab.h"
+ fi
+ fi
+ fi
+ if test -f "$from"; then
+ # If $2 is an absolute path name, then just use that,
+ # otherwise prepend `../'.
+ case "$2" in
+ /* | [A-Za-z]:*) target="$2";;
+ *) target="../$2";;
+ esac
+ mv "$from" "$target" || status=$?
+ else
+ # A missing file is only an error for the first file. This
+ # is a blatant hack to let us support using "yacc -d". If -d
+ # is not specified, we don't want an error when the header
+ # file is "missing".
+ if test $first = yes; then
+ status=1
+ fi
+ fi
+ shift
+ shift
+ first=no
+ done
+else
+ status=$?
+fi
+
+# Remove the directory.
+cd ..
+rm -rf $dirname
+
+exit $status
Property changes on: kde-extras/kfocus/branches/upstream/current/admin/ylwrap
___________________________________________________________________
Name: svn:executable
+
Added: kde-extras/kfocus/branches/upstream/current/config.h.in
===================================================================
--- kde-extras/kfocus/branches/upstream/current/config.h.in 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/config.h.in 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,36 @@
+/* config.h.in. Generated automatically from configure.in by autoheader. */
+
+/* The number of bytes in a char *. */
+#undef SIZEOF_CHAR_P
+
+/* The number of bytes in a int. */
+#undef SIZEOF_INT
+
+/* The number of bytes in a long. */
+#undef SIZEOF_LONG
+
+/* Name of package */
+#undef PACKAGE
+
+/* Version number of package */
+#undef VERSION
+
+/* C++ compiler supports template repository */
+#undef HAVE_TEMPLATE_REPOSITORY
+
+/* Defines if your system has the crypt function */
+#undef HAVE_CRYPT
+
+/* Define the type of the third argument for getsockname
+ */
+#undef ksize_t
+
+/* Define if you have libz */
+#undef HAVE_LIBZ
+
+/* Define if you have libpng */
+#undef HAVE_LIBPNG
+
+/* Define if you have libjpeg */
+#undef HAVE_LIBJPEG
+
Added: kde-extras/kfocus/branches/upstream/current/configure
===================================================================
--- kde-extras/kfocus/branches/upstream/current/configure 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/configure 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,7489 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.13
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_default_prefix=${KDEDIR:-/usr/local/kde}
+ac_help="$ac_help
+ --disable-fast-perl disable fast Makefile generation (needs perl)"
+ac_help="$ac_help
+ --enable-debug enables debug symbols [default=no]"
+ac_help="$ac_help
+ --disable-debug disables debug output and debug symbols [default=no]"
+ac_help="$ac_help
+ --enable-strict compiles with strict compiler options (may not work!)"
+ac_help="$ac_help
+ --enable-profile creates profiling infos [default=no]"
+ac_help="$ac_help
+ --enable-final build size optimized apps (experimental - needs lots of memory)"
+ac_help="$ac_help
+ --disable-closure don't delay template instantiation"
+ac_help="$ac_help
+ --enable-shared[=PKGS] build shared libraries [default=yes]"
+ac_help="$ac_help
+ --enable-static[=PKGS] build static libraries [default=no]"
+ac_help="$ac_help
+ --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
+ac_help="$ac_help
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
+ac_help="$ac_help
+ --disable-libtool-lock avoid locking (might break parallel builds)"
+ac_help="$ac_help
+ --with-pic try to use only PIC/non-PIC objects [default=use both]"
+ac_help="$ac_help
+ --enable-mt link to threaded Qt (experimental)"
+ac_help="$ac_help
+ --with-extra-includes=DIR
+ adds non standard include paths"
+ac_help="$ac_help
+ --with-extra-libs=DIR adds non standard library paths"
+ac_help="$ac_help
+ --with-qt-dir=DIR where the root of Qt is installed "
+ac_help="$ac_help
+ --with-qt-includes=DIR where the Qt includes are. "
+ac_help="$ac_help
+ --with-qt-libraries=DIR where the Qt library is installed."
+ac_help="$ac_help
+ --disable-rpath do not use the rpath feature of ld"
+ac_help="$ac_help
+ --disable-path-check don't try to find out, where to install"
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+ ac_prev=
+ continue
+ fi
+
+ case "$ac_option" in
+ -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) ac_optarg= ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case "$ac_option" in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir="$ac_optarg" ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build="$ac_optarg" ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file="$ac_optarg" ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+ datadir="$ac_optarg" ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+ fi
+ ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+ eval "enable_${ac_feature}=no" ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+ fi
+ ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+ case "$ac_option" in
+ *=*) ;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix="$ac_optarg" ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he)
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+ --cache-file=FILE cache test results in FILE
+ --help print this message
+ --no-create do not create output files
+ --quiet, --silent do not print \`checking...' messages
+ --version print the version of autoconf that created configure
+Directory and file names:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [same as prefix]
+ --bindir=DIR user executables in DIR [EPREFIX/bin]
+ --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
+ --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data in DIR
+ [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data in DIR
+ [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
+ --libdir=DIR object code libraries in DIR [EPREFIX/lib]
+ --includedir=DIR C header files in DIR [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
+ --infodir=DIR info documentation in DIR [PREFIX/info]
+ --mandir=DIR man documentation in DIR [PREFIX/man]
+ --srcdir=DIR find the sources in DIR [configure dir or ..]
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM
+ run sed PROGRAM on installed program names
+EOF
+ cat << EOF
+Host type:
+ --build=BUILD configure for building on BUILD [BUILD=HOST]
+ --host=HOST configure for HOST [guessed]
+ --target=TARGET configure for TARGET [TARGET=HOST]
+Features and packages:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --x-includes=DIR X include files are in DIR
+ --x-libraries=DIR X library files are in DIR
+EOF
+ if test -n "$ac_help"; then
+ echo "--enable and --with options recognized:$ac_help"
+ fi
+ exit 0 ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host="$ac_optarg" ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir="$ac_optarg" ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir="$ac_optarg" ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir="$ac_optarg" ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir="$ac_optarg" ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+ | --locals | --local | --loca | --loc | --lo)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ localstatedir="$ac_optarg" ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir="$ac_optarg" ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir="$ac_optarg" ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix="$ac_optarg" ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix="$ac_optarg" ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix="$ac_optarg" ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name="$ac_optarg" ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir="$ac_optarg" ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir="$ac_optarg" ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site="$ac_optarg" ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir="$ac_optarg" ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir="$ac_optarg" ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target="$ac_optarg" ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers)
+ echo "configure generated by autoconf version 2.13"
+ exit 0 ;;
+
+ -with-* | --with-*)
+ ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+ fi
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case "$ac_option" in
+ *=*) ;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_${ac_package}='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+ ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+ fi
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ eval "with_${ac_package}=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes="$ac_optarg" ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries="$ac_optarg" ;;
+
+ -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+ ;;
+
+ *)
+ if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+ echo "configure: warning: $ac_option: invalid host type" 1>&2
+ fi
+ if test "x$nonopt" != xNONE; then
+ { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+ fi
+ nonopt="$ac_option"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+ exec 6>/dev/null
+else
+ exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+ case "$ac_arg" in
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c) ;;
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+ ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+ esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set. These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=acinclude.m4
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_prog=$0
+ ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+ test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+ else
+ { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+ fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+ echo "loading site script $ac_site_file"
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+ # Stardent Vistra SVR4 grep lacks -e, says ghazi at caip.rutgers.edu.
+ if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+ ac_n= ac_c='
+' ac_t=' '
+ else
+ ac_n=-n ac_c= ac_t=
+ fi
+else
+ ac_n= ac_c='\c' ac_t=
+fi
+
+
+ac_aux_dir=
+for ac_dir in admin $srcdir/admin; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in admin $srcdir/admin" 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+# configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+# same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+# as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:617: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:638: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:656: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+if test "$program_transform_name" = s,x,x,; then
+ program_transform_name=
+else
+ # Double any \ or $. echo might interpret backslashes.
+ cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+ program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+ rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+
+
+
+ test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL
+ test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM
+ test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT
+ # Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:715: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+ if test -z "$kde_save_INSTALL_given" ; then
+ # OK, user hasn't given any INSTALL, autoconf found one for us
+ # now we test, if it supports the -p flag
+ echo $ac_n "checking for -p flag to install""... $ac_c" 1>&6
+echo "configure:772: checking for -p flag to install" >&5
+ rm -f confinst.$$.* > /dev/null 2>&1
+ echo "Testtest" > confinst.$$.orig
+ ac_res=no
+ if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then
+ if test -f confinst.$$.new ; then
+ # OK, -p seems to do no harm to install
+ INSTALL="${INSTALL} -p"
+ ac_res=yes
+ fi
+ fi
+ rm -f confinst.$$.*
+ echo "$ac_t""$ac_res" 1>&6
+ fi
+
+ if test -z "$kde_save_INSTALL_PROGRAM_given" ; then
+ INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)'
+ fi
+ if test -z "$kde_save_INSTALL_SCRIPT_given" ; then
+ INSTALL_SCRIPT='${INSTALL}'
+ fi
+
+echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+echo "configure:795: checking whether build environment is sane" >&5
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftestfile`
+ fi
+ if test "$*" != "X $srcdir/configure conftestfile" \
+ && test "$*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" 1>&2; exit 1; }
+ fi
+
+ test "$2" = conftestfile
+ )
+then
+ # Ok.
+ :
+else
+ { echo "configure: error: newly created file is older than distributed files!
+Check your system clock" 1>&2; exit 1; }
+fi
+rm -f conftest*
+echo "$ac_t""yes" 1>&6
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:833: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftestmake <<\EOF
+all:
+ @echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SET_MAKE=
+else
+ echo "$ac_t""no" 1>&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+PACKAGE=kfocus
+
+VERSION=1.0.2
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
+cat >> confdefs.h <<EOF
+#define PACKAGE "$PACKAGE"
+EOF
+
+cat >> confdefs.h <<EOF
+#define VERSION "$VERSION"
+EOF
+
+
+
+missing_dir=`cd $ac_aux_dir && pwd`
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:879: checking for working aclocal" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+ ACLOCAL=aclocal
+ echo "$ac_t""found" 1>&6
+else
+ ACLOCAL="$missing_dir/missing aclocal"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+echo "configure:892: checking for working autoconf" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+ AUTOCONF=autoconf
+ echo "$ac_t""found" 1>&6
+else
+ AUTOCONF="$missing_dir/missing autoconf"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:905: checking for working automake" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+ AUTOMAKE=automake
+ echo "$ac_t""found" 1>&6
+else
+ AUTOMAKE="$missing_dir/missing automake"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+echo "configure:918: checking for working autoheader" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+ AUTOHEADER=autoheader
+ echo "$ac_t""found" 1>&6
+else
+ AUTOHEADER="$missing_dir/missing autoheader"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+echo "configure:931: checking for working makeinfo" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+ MAKEINFO=makeinfo
+ echo "$ac_t""found" 1>&6
+else
+ MAKEINFO="$missing_dir/missing makeinfo"
+ echo "$ac_t""missing" 1>&6
+fi
+
+
+
+ unset CDPATH
+
+
+ if test "x$prefix" = "xNONE"; then
+ prefix=$ac_default_prefix
+ ac_configure_args="$ac_configure_args --prefix $prefix"
+ fi
+
+ # Check whether --enable-fast-perl or --disable-fast-perl was given.
+if test "${enable_fast_perl+set}" = set; then
+ enableval="$enable_fast_perl"
+ with_fast_perl=$enableval
+else
+ with_fast_perl=yes
+fi
+
+
+
+ val=
+ if test -f $srcdir/configure.files ; then
+ val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files`
+ fi
+ CONF_FILES=
+ if test -n "$val" ; then
+ for i in $val ; do
+ CONF_FILES="$CONF_FILES $i"
+ done
+ fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+ # Check whether --enable-debug or --disable-debug was given.
+if test "${enable_debug+set}" = set; then
+ enableval="$enable_debug"
+
+ if test $enableval = "no"; then
+ kde_use_debug_code="no"
+ kde_use_debug_define=yes
+ else
+ kde_use_debug_code="yes"
+ kde_use_debug_define=no
+ fi
+
+else
+ kde_use_debug_code="no"
+ kde_use_debug_define=no
+
+fi
+
+ # Check whether --enable-dummyoption or --disable-dummyoption was given.
+if test "${enable_dummyoption+set}" = set; then
+ enableval="$enable_dummyoption"
+ :
+fi
+
+
+ # Check whether --enable-strict or --disable-strict was given.
+if test "${enable_strict+set}" = set; then
+ enableval="$enable_strict"
+
+ if test $enableval = "no"; then
+ kde_use_strict_options="no"
+ else
+ kde_use_strict_options="yes"
+ fi
+
+else
+ kde_use_strict_options="no"
+fi
+
+
+ # Check whether --enable-profile or --disable-profile was given.
+if test "${enable_profile+set}" = set; then
+ enableval="$enable_profile"
+ kde_use_profiling=$enableval
+else
+ kde_use_profiling="no"
+
+fi
+
+
+ echo $ac_n "checking for a C-Compiler""... $ac_c" 1>&6
+echo "configure:1037: checking for a C-Compiler" >&5
+ echo "$ac_t""$CC" 1>&6
+
+ if test -z "$CC"; then # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1043: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ fi
+ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1072: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ fi
+ if test -z "$CC"; then # Extract the first word of "xlc", so it can be a program name with args.
+set dummy xlc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1120: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="xlc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ fi
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+
+ echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1149: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 1160 "configure"
+#include "confdefs.h"
+
+main(){return(0);}
+EOF
+if { (eval echo configure:1165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
+ else
+ ac_cv_prog_cc_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1191: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+ echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:1196: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1205: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+ if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+ else
+ GCC=
+ fi
+
+ USER_CFLAGS=$CFLAGS
+ CFLAGS=
+
+ if test -z "$CFLAGS"; then
+ if test "$kde_use_debug_code" = "yes"; then
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1226: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+ if test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g"
+ case $host in
+ *-*-linux-gnu)
+ CFLAGS="$CFLAGS -ansi -W -Wall -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE -D_BSD_SOURCE"
+ ;;
+ esac
+ fi
+ else
+ if test "$GCC" = "yes"; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=""
+ fi
+ if test "$kde_use_debug_define" = "yes"; then
+ CFLAGS="$CFLAGS -DNDEBUG"
+ fi
+ fi
+
+ if test "$kde_use_profiling" = yes; then
+ echo $ac_n "checking whether ${CC-cc} accepts -pg""... $ac_c" 1>&6
+echo "configure:1262: checking whether ${CC-cc} accepts -pg" >&5
+if eval "test \"`echo '$''{'kde_cv_prog_cc_pg'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+ if test -z "`${CC-cc} -pg -c conftest.c 2>&1`"; then
+ kde_cv_prog_cc_pg=yes
+ else
+ kde_cv_prog_cc_pg=no
+ fi
+ rm -f conftest*
+
+fi
+
+echo "$ac_t""$kde_cv_prog_cc_pg" 1>&6
+ if test "$kde_cv_prog_cc_pg" = yes; then
+ CFLAGS="$CFLAGS -pg"
+ fi
+ fi
+
+ if test "$GCC" = "yes"; then
+ CFLAGS="$CFLAGS"
+
+ if test "$kde_use_strict_options" = "yes"; then
+ CFLAGS="$CFLAGS -W -Wall -ansi -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings"
+ fi
+ fi
+
+ fi
+
+ case "$host" in
+ *-*-sysv4.2uw*) CFLAGS="$CFLAGS -D_UNIXWARE";;
+ *-*-sysv5uw7*) CFLAGS="$CFLAGS -D_UNIXWARE7";;
+ esac
+
+ if test -n "$USER_CFLAGS"; then
+ CFLAGS="$CFLAGS $USER_CFLAGS"
+ fi
+
+ if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then
+ LDFLAGS=""
+ fi
+
+
+
+ echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:1308: checking how to run the C preprocessor" >&5
+ # On Suns, sometimes $CPP names a directory.
+ if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+ fi
+ if test -z "$CPP"; then
+ if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 1323 "configure"
+#include "confdefs.h"
+#include <assert.h>
+ Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1329: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 1340 "configure"
+#include "confdefs.h"
+#include <assert.h>
+ Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1346: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+ else
+ ac_cv_prog_CPP="$CPP"
+ fi
+ echo "$ac_t""$CPP" 1>&6
+
+
+ echo $ac_n "checking for a C++-Compiler""... $ac_c" 1>&6
+echo "configure:1370: checking for a C++-Compiler" >&5
+ echo "$ac_t""$CXX" 1>&6
+
+ if test -z "$CXX"; then # Extract the first word of "g++", so it can be a program name with args.
+set dummy g++; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1376: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CXX="g++"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CXX="$ac_cv_prog_CXX"
+if test -n "$CXX"; then
+ echo "$ac_t""$CXX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ fi
+ if test -z "$CXX"; then # Extract the first word of "CC", so it can be a program name with args.
+set dummy CC; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1405: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CXX="CC"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CXX="$ac_cv_prog_CXX"
+if test -n "$CXX"; then
+ echo "$ac_t""$CXX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ fi
+ if test -z "$CXX"; then # Extract the first word of "xlC", so it can be a program name with args.
+set dummy xlC; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1434: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CXX="xlC"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CXX="$ac_cv_prog_CXX"
+if test -n "$CXX"; then
+ echo "$ac_t""$CXX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ fi
+ if test -z "$CXX"; then # Extract the first word of "DCC", so it can be a program name with args.
+set dummy DCC; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1463: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CXX="DCC"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CXX="$ac_cv_prog_CXX"
+if test -n "$CXX"; then
+ echo "$ac_t""$CXX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ fi
+ test -z "$CXX" && { echo "configure: error: no acceptable C++-compiler found in \$PATH" 1>&2; exit 1; }
+
+ echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1492: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+
+
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+
+
+
+cat > conftest.$ac_ext << EOF
+
+#line 1508 "configure"
+#include "confdefs.h"
+
+int main(){return(0);}
+EOF
+if { (eval echo configure:1513: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cxx_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cxx_cross=no
+ else
+ ac_cv_prog_cxx_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cxx_works=no
+fi
+rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
+if test $ac_cv_prog_cxx_works = no; then
+ { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1539: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
+cross_compiling=$ac_cv_prog_cxx_cross
+
+ echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
+echo "configure:1544: checking whether we are using GNU C++" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.C <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1553: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gxx=yes
+else
+ ac_cv_prog_gxx=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gxx" 1>&6
+
+ if test $ac_cv_prog_gxx = yes; then
+ GXX=yes
+ fi
+
+ USER_CXXFLAGS=$CXXFLAGS
+ CXXFLAGS=""
+
+ if test -z "$CXXFLAGS"; then
+ if test "$kde_use_debug_code" = "yes"; then
+ echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
+echo "configure:1572: checking whether ${CXX-g++} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.cc
+if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
+ ac_cv_prog_cxx_g=yes
+else
+ ac_cv_prog_cxx_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
+ if test $ac_cv_prog_cxx_g = yes; then
+ CXXFLAGS="-g"
+ case $host in *-*-linux-gnu)
+ CXXFLAGS="$CXXFLAGS -ansi -D_XOPEN_SOURCE -D_BSD_SOURCE -Wbad-function-cast -Wcast-align -Wundef -Wconversion"
+ ;;
+ esac
+ fi
+ else
+ if test "$GXX" = "yes"; then
+ CXXFLAGS="-O2"
+ fi
+ if test "$kde_use_debug_define" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -DNDEBUG"
+ fi
+ fi
+
+ if test "$kde_use_profiling" = yes; then
+ echo $ac_n "checking whether ${CXX-g++} accepts -pg""... $ac_c" 1>&6
+echo "configure:1605: checking whether ${CXX-g++} accepts -pg" >&5
+if eval "test \"`echo '$''{'kde_cv_prog_cxx_pg'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.cc
+ if test -z "`${CXX-g++} -pg -c conftest.cc 2>&1`"; then
+ kde_cv_prog_cxx_pg=yes
+ else
+ kde_cv_prog_cxx_pg=no
+ fi
+ rm -f conftest*
+
+fi
+
+echo "$ac_t""$kde_cv_prog_cxx_pg" 1>&6
+ if test "$kde_cv_prog_cxx_pg" = yes; then
+ CXXFLAGS="$CXXFLAGS -pg"
+ fi
+ fi
+
+
+
+echo $ac_n "checking whether $CXX supports -fno-exceptions""... $ac_c" 1>&6
+echo "configure:1628: checking whether $CXX supports -fno-exceptions" >&5
+kde_cache=`echo fno-exceptions | sed 'y%.=/+-%___p_%'`
+if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+echo 'int main() { return 0; }' >conftest.cc
+eval "kde_cv_prog_cxx_$kde_cache=no"
+if test -z "`$CXX -fno-exceptions -c conftest.cc 2>&1`"; then
+ if test -z "`$CXX -fno-exceptions -o conftest conftest.o 2>&1`"; then
+ eval "kde_cv_prog_cxx_$kde_cache=yes"
+ fi
+fi
+rm -f conftest*
+
+fi
+
+if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+
+ CXXFLAGS="$CXXFLAGS -fno-exceptions"
+
+else
+ echo "$ac_t""no" 1>&6
+ :
+
+fi
+
+
+
+
+
+echo $ac_n "checking whether $CXX supports -fno-check-new""... $ac_c" 1>&6
+echo "configure:1662: checking whether $CXX supports -fno-check-new" >&5
+kde_cache=`echo fno-check-new | sed 'y%.=/+-%___p_%'`
+if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+echo 'int main() { return 0; }' >conftest.cc
+eval "kde_cv_prog_cxx_$kde_cache=no"
+if test -z "`$CXX -fno-check-new -c conftest.cc 2>&1`"; then
+ if test -z "`$CXX -fno-check-new -o conftest conftest.o 2>&1`"; then
+ eval "kde_cv_prog_cxx_$kde_cache=yes"
+ fi
+fi
+rm -f conftest*
+
+fi
+
+if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+
+ CXXFLAGS="$CXXFLAGS -fno-check-new"
+
+else
+ echo "$ac_t""no" 1>&6
+ :
+
+fi
+
+
+ if test "$GXX" = "yes"; then
+ CXXFLAGS="$CXXFLAGS"
+
+ if test true || test "$kde_use_debug_code" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings"
+
+
+
+echo $ac_n "checking whether $CXX supports -Wno-long-long""... $ac_c" 1>&6
+echo "configure:1701: checking whether $CXX supports -Wno-long-long" >&5
+kde_cache=`echo Wno-long-long | sed 'y%.=/+-%___p_%'`
+if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+echo 'int main() { return 0; }' >conftest.cc
+eval "kde_cv_prog_cxx_$kde_cache=no"
+if test -z "`$CXX -Wno-long-long -c conftest.cc 2>&1`"; then
+ if test -z "`$CXX -Wno-long-long -o conftest conftest.o 2>&1`"; then
+ eval "kde_cv_prog_cxx_$kde_cache=yes"
+ fi
+fi
+rm -f conftest*
+
+fi
+
+if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+
+ CXXFLAGS="$CXXFLAGS -Wno-long-long"
+
+else
+ echo "$ac_t""no" 1>&6
+ :
+
+fi
+
+
+
+echo $ac_n "checking whether $CXX supports -Wnon-virtual-dtor""... $ac_c" 1>&6
+echo "configure:1733: checking whether $CXX supports -Wnon-virtual-dtor" >&5
+kde_cache=`echo Wnon-virtual-dtor | sed 'y%.=/+-%___p_%'`
+if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+echo 'int main() { return 0; }' >conftest.cc
+eval "kde_cv_prog_cxx_$kde_cache=no"
+if test -z "`$CXX -Wnon-virtual-dtor -c conftest.cc 2>&1`"; then
+ if test -z "`$CXX -Wnon-virtual-dtor -o conftest conftest.o 2>&1`"; then
+ eval "kde_cv_prog_cxx_$kde_cache=yes"
+ fi
+fi
+rm -f conftest*
+
+fi
+
+if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+
+ CXXFLAGS="$CXXFLAGS -Wnon-virtual-dtor"
+
+else
+ echo "$ac_t""no" 1>&6
+ :
+
+fi
+
+
+
+echo $ac_n "checking whether $CXX supports -fno-builtin""... $ac_c" 1>&6
+echo "configure:1765: checking whether $CXX supports -fno-builtin" >&5
+kde_cache=`echo fno-builtin | sed 'y%.=/+-%___p_%'`
+if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+echo 'int main() { return 0; }' >conftest.cc
+eval "kde_cv_prog_cxx_$kde_cache=no"
+if test -z "`$CXX -fno-builtin -c conftest.cc 2>&1`"; then
+ if test -z "`$CXX -fno-builtin -o conftest conftest.o 2>&1`"; then
+ eval "kde_cv_prog_cxx_$kde_cache=yes"
+ fi
+fi
+rm -f conftest*
+
+fi
+
+if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+
+ CXXFLAGS="$CXXFLAGS -fno-builtin"
+
+else
+ echo "$ac_t""no" 1>&6
+ :
+
+fi
+
+
+ fi
+
+ if test "$kde_use_strict_options" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -Wcast-qual -Wbad-function-cast -Wshadow -Wcast-align"
+ fi
+
+ if test "$kde_very_strict" = "yes"; then
+ CXXFLAGS="$CXXFLAGS -Wold-style-cast -Wredundant-decls -Wconversion"
+ fi
+ fi
+ fi
+
+
+
+echo $ac_n "checking whether $CXX supports -fexceptions""... $ac_c" 1>&6
+echo "configure:1810: checking whether $CXX supports -fexceptions" >&5
+kde_cache=`echo fexceptions | sed 'y%.=/+-%___p_%'`
+if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+echo 'int main() { return 0; }' >conftest.cc
+eval "kde_cv_prog_cxx_$kde_cache=no"
+if test -z "`$CXX -fexceptions -c conftest.cc 2>&1`"; then
+ if test -z "`$CXX -fexceptions -o conftest conftest.o 2>&1`"; then
+ eval "kde_cv_prog_cxx_$kde_cache=yes"
+ fi
+fi
+rm -f conftest*
+
+fi
+
+if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+
+ USE_EXCEPTIONS="-fexceptions"
+
+else
+ echo "$ac_t""no" 1>&6
+ :
+ USE_EXCEPTIONS=
+
+fi
+
+
+
+
+
+echo $ac_n "checking whether $CXX supports -frtti""... $ac_c" 1>&6
+echo "configure:1845: checking whether $CXX supports -frtti" >&5
+kde_cache=`echo frtti | sed 'y%.=/+-%___p_%'`
+if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+echo 'int main() { return 0; }' >conftest.cc
+eval "kde_cv_prog_cxx_$kde_cache=no"
+if test -z "`$CXX -frtti -c conftest.cc 2>&1`"; then
+ if test -z "`$CXX -frtti -o conftest conftest.o 2>&1`"; then
+ eval "kde_cv_prog_cxx_$kde_cache=yes"
+ fi
+fi
+rm -f conftest*
+
+fi
+
+if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+
+ USE_RTTI="-frtti"
+
+else
+ echo "$ac_t""no" 1>&6
+ :
+ USE_RTTI=
+
+fi
+
+
+
+ case "$host" in
+ *-*-irix*) test "$GXX" = yes && CXXFLAGS="$CXXFLAGS -D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS" ;;
+ *-*-sysv4.2uw*) CXXFLAGS="$CXXFLAGS -D_UNIXWARE";;
+ *-*-sysv5uw7*) CXXFLAGS="$CXXFLAGS -D_UNIXWARE7";;
+ *-*-solaris*)
+ if test "$GXX" = yes; then
+ libstdcpp=`gcc -print-file-name=libstdc++.so`
+ if test ! -f $libstdcpp; then
+ { echo "configure: error: You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so" 1>&2; exit 1; }
+ fi
+ fi
+ ;;
+ esac
+
+ if test -n "$USER_CXXFLAGS"; then
+ CXXFLAGS="$CXXFLAGS $USER_CXXFLAGS"
+ fi
+
+ __val=$CXX
+ __forbid=" -fno-rtti -rpath "
+ if test -n "$__val"; then
+ __new=""
+ ac_save_IFS=$IFS
+ IFS=" "
+ for i in $__val; do
+ case "$__forbid" in
+ *" $i "*) echo "configure: warning: found forbidden $i in CXX, removing it" 1>&2 ;;
+ *) # Careful to not add spaces, where there were none, because otherwise
+ # libtool gets confused, if we change e.g. CXX
+ if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
+ esac
+ done
+ IFS=$ac_save_IFS
+ CXX=$__new
+ fi
+
+ __val=$CXXFLAGS
+ __forbid=" -fno-rtti -rpath "
+ if test -n "$__val"; then
+ __new=""
+ ac_save_IFS=$IFS
+ IFS=" "
+ for i in $__val; do
+ case "$__forbid" in
+ *" $i "*) echo "configure: warning: found forbidden $i in CXXFLAGS, removing it" 1>&2 ;;
+ *) # Careful to not add spaces, where there were none, because otherwise
+ # libtool gets confused, if we change e.g. CXX
+ if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
+ esac
+ done
+ IFS=$ac_save_IFS
+ CXXFLAGS=$__new
+ fi
+
+
+
+ echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
+echo "configure:1934: checking how to run the C++ preprocessor" >&5
+ if test -z "$CXXCPP"; then
+ if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+
+ CXXCPP="${CXX-g++} -E"
+ cat > conftest.$ac_ext <<EOF
+#line 1951 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CXXCPP=/lib/cpp
+fi
+rm -f conftest*
+ ac_cv_prog_CXXCPP="$CXXCPP"
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+fi
+ CXXCPP="$ac_cv_prog_CXXCPP"
+ fi
+ echo "$ac_t""$CXXCPP" 1>&6
+
+ # the following is to allow programs, that are known to
+ # have problems when compiled with -O2
+ if test -n "$CXXFLAGS"; then
+ kde_safe_IFS=$IFS
+ IFS=" "
+ NOOPT_CXXFLAGS=""
+ for i in $CXXFLAGS; do
+ case $i in
+ -O*)
+ ;;
+ *)
+ NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS $i"
+ ;;
+ esac
+ done
+ IFS=$kde_safe_IFS
+ fi
+
+
+
+ # Check whether --enable-final or --disable-final was given.
+if test "${enable_final+set}" = set; then
+ enableval="$enable_final"
+ kde_use_final=$enableval
+else
+ kde_use_final=no
+fi
+
+
+
+ REPO=""
+ NOREPO=""
+
+
+
+echo $ac_n "checking whether $CXX supports -frepo""... $ac_c" 1>&6
+echo "configure:2017: checking whether $CXX supports -frepo" >&5
+kde_cache=`echo frepo | sed 'y%.=/+-%___p_%'`
+if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+echo 'int main() { return 0; }' >conftest.cc
+eval "kde_cv_prog_cxx_$kde_cache=no"
+if test -z "`$CXX -frepo -c conftest.cc 2>&1`"; then
+ if test -z "`$CXX -frepo -o conftest conftest.o 2>&1`"; then
+ eval "kde_cv_prog_cxx_$kde_cache=yes"
+ fi
+fi
+rm -f conftest*
+
+fi
+
+if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+
+ REPO="-frepo"
+ NOREPO="-fno-repo"
+
+else
+ echo "$ac_t""no" 1>&6
+ :
+
+fi
+
+
+ if test -z "$REPO"; then
+
+
+echo $ac_n "checking whether $CXX supports -instances=explicit""... $ac_c" 1>&6
+echo "configure:2052: checking whether $CXX supports -instances=explicit" >&5
+kde_cache=`echo instances=explicit | sed 'y%.=/+-%___p_%'`
+if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+echo 'int main() { return 0; }' >conftest.cc
+eval "kde_cv_prog_cxx_$kde_cache=no"
+if test -z "`$CXX -instances=explicit -c conftest.cc 2>&1`"; then
+ if test -z "`$CXX -instances=explicit -o conftest conftest.o 2>&1`"; then
+ eval "kde_cv_prog_cxx_$kde_cache=yes"
+ fi
+fi
+rm -f conftest*
+
+fi
+
+if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+
+ REPO="-instances=explicit"
+ NOREPO="-instances=extern"
+
+else
+ echo "$ac_t""no" 1>&6
+ :
+
+fi
+
+ fi
+
+ if test -n "$REPO"; then
+ cat >> confdefs.h <<EOF
+#define HAVE_TEMPLATE_REPOSITORY 1
+EOF
+
+
+ fi
+
+
+
+
+ if test "x$kde_use_final" = "xyes"; then
+ KDE_USE_FINAL_TRUE=""
+ KDE_USE_FINAL_FALSE="#"
+ else
+ KDE_USE_FINAL_TRUE="#"
+ KDE_USE_FINAL_FALSE=""
+ fi
+
+
+
+ # Check whether --enable-closure or --disable-closure was given.
+if test "${enable_closure+set}" = set; then
+ enableval="$enable_closure"
+ kde_use_closure=$enableval
+else
+ kde_use_closure=yes
+fi
+
+
+ if test "x$kde_use_closure" = "xyes"; then
+ KDE_USE_CLOSURE_TRUE=""
+ KDE_USE_CLOSURE_FALSE="#"
+# CXXFLAGS="$CXXFLAGS $REPO"
+ else
+ KDE_USE_CLOSURE_TRUE="#"
+ KDE_USE_CLOSURE_FALSE=""
+ fi
+
+
+
+
+
+
+ KDE_CXXFLAGS=
+
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_shared=yes
+fi
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+ p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_static=no
+fi
+
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+ p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_fast_install=yes
+fi
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
+echo "configure:2212: checking for ld used by GCC" >&5
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case "$ac_prog" in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
+echo "configure:2242: checking for GNU ld" >&5
+else
+ echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+echo "configure:2245: checking for non-GNU ld" >&5
+fi
+if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
+echo "configure:2280: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ lt_cv_prog_gnu_ld=yes
+else
+ lt_cv_prog_gnu_ld=no
+fi
+fi
+
+echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+echo "configure:2297: checking for $LD option to reload object files" >&5
+if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+
+echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
+echo "configure:2309: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ else
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi
+fi
+
+NM="$lt_cv_path_NM"
+echo "$ac_t""$NM" 1>&6
+
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:2347: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+echo "configure:2368: checking how to recognise dependant libraries" >&5
+if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case "$host_os" in
+aix4*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi4*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin* | mingw* |pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
+ ;;
+
+freebsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case "$host_cpu" in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20*|hpux11*)
+ # TODO: Does this work for hpux-11 too?
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+
+irix5* | irix6*)
+ case "$host_os" in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case "$LD" in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ case "$host_cpu" in
+ alpha* | i*86 | powerpc* | sparc* | ia64* | s390* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library'
+ else
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+ fi
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+
+openbsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case "$host_cpu" in
+ i*86 )
+ lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+newsos6)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case "$host_vendor" in
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
+fi
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# Only perform the check for file, if the check method requires it
+case "$deplibs_check_method" in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+echo "configure:2550: checking for ${ac_tool_prefix}file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$MAGIC_CMD" in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case "$deplibs_check_method" in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool at gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ echo $ac_n "checking for file""... $ac_c" 1>&6
+echo "configure:2612: checking for file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$MAGIC_CMD" in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case "$deplibs_check_method" in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool at gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2683: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2715: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ RANLIB=":"
+fi
+fi
+
+# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2750: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_STRIP"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2782: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ STRIP=":"
+fi
+fi
+
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+libtool_flags="$libtool_flags --enable-dlopen"
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+ withval="$with_pic"
+ pic_mode="$withval"
+else
+ pic_mode=default
+fi
+
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$host" in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 2849 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2850: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.$ac_objext`" in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+echo "configure:2871: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ cat > conftest.$ac_ext <<EOF
+#line 2884 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:2891: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=no
+fi
+rm -f conftest*
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+fi
+
+echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+
+esac
+
+
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:2922: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2927 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:2938: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_cygwin=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:2955: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2960 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:2967: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_mingw32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
+
+# Save cache, so that ltconfig can load it
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
+|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+
+# Reload cache, that may have been modified by ltconfig
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
+fi
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+
+
+
+LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
+lt_save_CC="$CC"
+lt_save_CFLAGS="$CFLAGS"
+AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" \
+file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
+--build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
+|| { echo "configure: error: libtool tag configuration failed" 1>&2; exit 1; }
+CC="$lt_save_CC"
+CFLAGS="$lt_save_CFLAGS"
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+
+
+
+
+
+
+
+
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+echo "configure:3102: checking for object suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftest*
+echo 'int i = 1;' > conftest.$ac_ext
+if { (eval echo configure:3108: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ for ac_file in conftest.*; do
+ case $ac_file in
+ *.c) ;;
+ *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+ esac
+ done
+else
+ { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_objext" 1>&6
+OBJEXT=$ac_cv_objext
+ac_objext=$ac_cv_objext
+
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:3128: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:3138: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+
+
+
+
+
+
+
+
+LIBTOOL_SHELL="/bin/sh ./libtool"
+# LIBTOOL="$LIBTOOL --silent"
+KDE_PLUGIN="-avoid-version -module -no-undefined"
+
+
+
+
+
+ # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3184: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$MSGFMT" in
+ /*)
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"; then
+ ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt"
+ ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test -n "$MSGFMT"; then
+ echo "$ac_t""$MSGFMT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3218: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$GMSGFMT" in
+ /*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
+esac
+fi
+GMSGFMT="$ac_cv_path_GMSGFMT"
+if test -n "$GMSGFMT"; then
+ echo "$ac_t""$GMSGFMT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+ if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then
+ echo "$ac_t""found msgfmt program is not GNU msgfmt; ignore it" 1>&6
+ GMSGFMT=":"
+ fi
+ MSGFMT=$GMSGFMT
+
+
+
+ # Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3263: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$XGETTEXT" in
+ /*)
+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+ ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test -n "$XGETTEXT"; then
+ echo "$ac_t""$XGETTEXT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+ if test "$XGETTEXT" != ":"; then
+ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+ : ;
+ else
+ echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6
+ XGETTEXT=":"
+ fi
+ fi
+
+
+
+
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ echo $ac_n "checking for main in -lcompat""... $ac_c" 1>&6
+echo "configure:3316: checking for main in -lcompat" >&5
+ac_lib_var=`echo compat'_'main | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lcompat $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3324 "configure"
+#include "confdefs.h"
+
+int main() {
+main()
+; return 0; }
+EOF
+if { (eval echo configure:3331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBCOMPAT="-lcompat"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ kde_have_crypt=
+ echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
+echo "configure:3353: checking for crypt in -lcrypt" >&5
+ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lcrypt $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3361 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char crypt();
+
+int main() {
+crypt()
+; return 0; }
+EOF
+if { (eval echo configure:3372: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBCRYPT="-lcrypt"; kde_have_crypt=yes
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for crypt in -lc""... $ac_c" 1>&6
+echo "configure:3391: checking for crypt in -lc" >&5
+ac_lib_var=`echo c'_'crypt | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lc $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3399 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char crypt();
+
+int main() {
+crypt()
+; return 0; }
+EOF
+if { (eval echo configure:3410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ kde_have_crypt=yes
+else
+ echo "$ac_t""no" 1>&6
+
+ echo "configure: warning: you have no crypt in either libcrypt or libc.
+You should install libcrypt from another source or configure with PAM
+support" 1>&2
+ kde_have_crypt=no
+
+fi
+
+fi
+
+
+ if test $kde_have_crypt = yes; then
+ cat >> confdefs.h <<EOF
+#define HAVE_CRYPT 1
+EOF
+
+ fi
+ echo $ac_n "checking for the third argument of getsockname""... $ac_c" 1>&6
+echo "configure:3446: checking for the third argument of getsockname" >&5
+if eval "test \"`echo '$''{'ac_cv_ksize_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+
+
+cat > conftest.$ac_ext <<EOF
+#line 3462 "configure"
+#include "confdefs.h"
+
+#include <sys/types.h>
+#include <sys/socket.h>
+
+int main() {
+
+socklen_t a=0;
+getsockname(0,(struct sockaddr*)0, &a);
+
+; return 0; }
+EOF
+if { (eval echo configure:3475: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_ksize_t=socklen_t
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_ksize_t=
+fi
+rm -f conftest*
+if test -z "$ac_cv_ksize_t"; then
+ac_safe_cxxflags="$CXXFLAGS"
+if test "$GCC" = "yes"; then
+ CXXFLAGS="-Werror $CXXFLAGS"
+fi
+cat > conftest.$ac_ext <<EOF
+#line 3491 "configure"
+#include "confdefs.h"
+
+#include <sys/types.h>
+#include <sys/socket.h>
+
+int main() {
+
+int a=0;
+getsockname(0,(struct sockaddr*)0, &a);
+
+; return 0; }
+EOF
+if { (eval echo configure:3504: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_ksize_t=int
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_ksize_t=size_t
+fi
+rm -f conftest*
+CXXFLAGS="$ac_safe_cxxflags"
+fi
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+
+fi
+
+
+if test -z "$ac_cv_ksize_t"; then
+ ac_cv_ksize_t=int
+fi
+
+echo "$ac_t""$ac_cv_ksize_t" 1>&6
+cat >> confdefs.h <<EOF
+#define ksize_t $ac_cv_ksize_t
+EOF
+
+
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
+echo "configure:3546: checking for dnet_ntoa in -ldnet" >&5
+ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldnet $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3554 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dnet_ntoa();
+
+int main() {
+dnet_ntoa()
+; return 0; }
+EOF
+if { (eval echo configure:3565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_lib_dnet_dnet_ntoa = no; then
+ echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
+echo "configure:3587: checking for dnet_ntoa in -ldnet_stub" >&5
+ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldnet_stub $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3595 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dnet_ntoa();
+
+int main() {
+dnet_ntoa()
+; return 0; }
+EOF
+if { (eval echo configure:3606: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ echo $ac_n "checking for inet_ntoa""... $ac_c" 1>&6
+echo "configure:3628: checking for inet_ntoa" >&5
+if eval "test \"`echo '$''{'ac_cv_func_inet_ntoa'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3633 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char inet_ntoa(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char inet_ntoa();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_inet_ntoa) || defined (__stub___inet_ntoa)
+choke me
+#else
+inet_ntoa();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3656: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_inet_ntoa=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_inet_ntoa=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'inet_ntoa`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_func_inet_ntoa = no; then
+ echo $ac_n "checking for inet_ntoa in -lnsl""... $ac_c" 1>&6
+echo "configure:3677: checking for inet_ntoa in -lnsl" >&5
+ac_lib_var=`echo nsl'_'inet_ntoa | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lnsl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3685 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char inet_ntoa();
+
+int main() {
+inet_ntoa()
+; return 0; }
+EOF
+if { (eval echo configure:3696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ echo $ac_n "checking for connect""... $ac_c" 1>&6
+echo "configure:3718: checking for connect" >&5
+if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3723 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char connect(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char connect();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_connect) || defined (__stub___connect)
+choke me
+#else
+connect();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_connect=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_connect=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_func_connect = no; then
+ echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
+echo "configure:3767: checking for connect in -lsocket" >&5
+ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3775 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char connect();
+
+int main() {
+connect()
+; return 0; }
+EOF
+if { (eval echo configure:3786: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ echo $ac_n "checking for remove""... $ac_c" 1>&6
+echo "configure:3809: checking for remove" >&5
+if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3814 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char remove(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char remove();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_remove) || defined (__stub___remove)
+choke me
+#else
+remove();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3837: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_remove=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_remove=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_func_remove = no; then
+ echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
+echo "configure:3858: checking for remove in -lposix" >&5
+ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lposix $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3866 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char remove();
+
+int main() {
+remove()
+; return 0; }
+EOF
+if { (eval echo configure:3877: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
+ echo $ac_n "checking for shmat""... $ac_c" 1>&6
+echo "configure:3901: checking for shmat" >&5
+if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3906 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char shmat(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shmat();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_shmat) || defined (__stub___shmat)
+choke me
+#else
+shmat();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3929: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_shmat=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_shmat=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
+echo "configure:3947: checking for shmat in -lipc" >&5
+ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lipc $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3955 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shmat();
+
+int main() {
+shmat()
+; return 0; }
+EOF
+if { (eval echo configure:3966: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+
+ # Solaris 2.6 needs -lresolv for res_init
+ echo $ac_n "checking for res_init""... $ac_c" 1>&6
+echo "configure:3991: checking for res_init" >&5
+if eval "test \"`echo '$''{'ac_cv_func_res_init'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3996 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char res_init(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char res_init();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_res_init) || defined (__stub___res_init)
+choke me
+#else
+res_init();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:4019: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_res_init=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_res_init=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'res_init`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for res_init in -lresolv""... $ac_c" 1>&6
+echo "configure:4037: checking for res_init in -lresolv" >&5
+ac_lib_var=`echo resolv'_'res_init | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lresolv $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4045 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char res_init();
+
+int main() {
+res_init()
+; return 0; }
+EOF
+if { (eval echo configure:4056: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lresolv"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+
+ LIBSOCKET="$X_EXTRA_LIBS"
+
+
+ echo $ac_n "checking for killpg in -lucb""... $ac_c" 1>&6
+echo "configure:4083: checking for killpg in -lucb" >&5
+ac_lib_var=`echo ucb'_'killpg | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lucb $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4091 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char killpg();
+
+int main() {
+killpg()
+; return 0; }
+EOF
+if { (eval echo configure:4102: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBUCB="-lucb"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+ case $host in *-*-lynxos* )
+ echo $ac_n "checking LynxOS header file wrappers""... $ac_c" 1>&6
+echo "configure:4125: checking LynxOS header file wrappers" >&5
+ CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"
+ echo "$ac_t""disabled" 1>&6
+ echo $ac_n "checking for gethostbyname in -lbsd""... $ac_c" 1>&6
+echo "configure:4129: checking for gethostbyname in -lbsd" >&5
+ac_lib_var=`echo bsd'_'gethostbyname | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lbsd $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4137 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname();
+
+int main() {
+gethostbyname()
+; return 0; }
+EOF
+if { (eval echo configure:4148: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBSOCKET="-lbsd"
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+
+ echo $ac_n "checking size of int""... $ac_c" 1>&6
+echo "configure:4171: checking size of int" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_sizeof_int=4
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4179 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+main()
+{
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d\n", sizeof(int));
+ exit(0);
+}
+EOF
+if { (eval echo configure:4190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_sizeof_int=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_sizeof_int=0
+fi
+rm -fr conftest*
+fi
+
+fi
+echo "$ac_t""$ac_cv_sizeof_int" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_INT $ac_cv_sizeof_int
+EOF
+
+ echo $ac_n "checking size of long""... $ac_c" 1>&6
+echo "configure:4209: checking size of long" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_sizeof_long=4
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4217 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+main()
+{
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d\n", sizeof(long));
+ exit(0);
+}
+EOF
+if { (eval echo configure:4228: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_sizeof_long=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_sizeof_long=0
+fi
+rm -fr conftest*
+fi
+
+fi
+echo "$ac_t""$ac_cv_sizeof_long" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_LONG $ac_cv_sizeof_long
+EOF
+
+ echo $ac_n "checking size of char *""... $ac_c" 1>&6
+echo "configure:4247: checking size of char *" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_char_p'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_sizeof_char_p=4
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4255 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+main()
+{
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d\n", sizeof(char *));
+ exit(0);
+}
+EOF
+if { (eval echo configure:4266: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_sizeof_char_p=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_sizeof_char_p=0
+fi
+rm -fr conftest*
+fi
+
+fi
+echo "$ac_t""$ac_cv_sizeof_char_p" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_CHAR_P $ac_cv_sizeof_char_p
+EOF
+
+
+
+echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+echo "configure:4287: checking for dlopen in -ldl" >&5
+ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4295 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo configure:4306: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+
+LIBDL="-ldl"
+ac_cv_have_dlfcn=yes
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+echo $ac_n "checking for shl_unload in -ldld""... $ac_c" 1>&6
+echo "configure:4331: checking for shl_unload in -ldld" >&5
+ac_lib_var=`echo dld'_'shl_unload | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldld $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4339 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shl_unload();
+
+int main() {
+shl_unload()
+; return 0; }
+EOF
+if { (eval echo configure:4350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+
+LIBDL="-ldld"
+ac_cv_have_shload=yes
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+
+
+
+
+echo $ac_n "checking for extra includes""... $ac_c" 1>&6
+echo "configure:4379: checking for extra includes" >&5
+# Check whether --with-extra-includes or --without-extra-includes was given.
+if test "${with_extra_includes+set}" = set; then
+ withval="$with_extra_includes"
+ kde_use_extra_includes="$withval"
+else
+ kde_use_extra_includes=NONE
+
+fi
+
+kde_extra_includes=
+if test -n "$kde_use_extra_includes" && \
+ test "$kde_use_extra_includes" != "NONE"; then
+
+ ac_save_ifs=$IFS
+ IFS=':'
+ for dir in $kde_use_extra_includes; do
+ kde_extra_includes="$kde_extra_includes $dir"
+ USER_INCLUDES="$USER_INCLUDES -I$dir"
+ done
+ IFS=$ac_save_ifs
+ kde_use_extra_includes="added"
+else
+ kde_use_extra_includes="no"
+fi
+
+
+echo "$ac_t""$kde_use_extra_includes" 1>&6
+
+kde_extra_libs=
+echo $ac_n "checking for extra libs""... $ac_c" 1>&6
+echo "configure:4410: checking for extra libs" >&5
+# Check whether --with-extra-libs or --without-extra-libs was given.
+if test "${with_extra_libs+set}" = set; then
+ withval="$with_extra_libs"
+ kde_use_extra_libs=$withval
+else
+ kde_use_extra_libs=NONE
+
+fi
+
+if test -n "$kde_use_extra_libs" && \
+ test "$kde_use_extra_libs" != "NONE"; then
+
+ ac_save_ifs=$IFS
+ IFS=':'
+ for dir in $kde_use_extra_libs; do
+ kde_extra_libs="$kde_extra_libs $dir"
+ KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir"
+ USER_LDFLAGS="$USER_LDFLAGS -L$dir"
+ done
+ IFS=$ac_save_ifs
+ kde_use_extra_libs="added"
+else
+ kde_use_extra_libs="no"
+fi
+
+
+
+echo "$ac_t""$kde_use_extra_libs" 1>&6
+
+
+
+
+echo $ac_n "checking for libz""... $ac_c" 1>&6
+echo "configure:4444: checking for libz" >&5
+if eval "test \"`echo '$''{'ac_cv_lib_z'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+kde_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET"
+kde_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+cat > conftest.$ac_ext <<EOF
+#line 4461 "configure"
+#include "confdefs.h"
+
+#include<zlib.h>
+
+int main() {
+return (zlibVersion() == ZLIB_VERSION);
+; return 0; }
+EOF
+if { (eval echo configure:4470: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_z='-lz'"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_z=no"
+fi
+rm -f conftest*
+LIBS="$kde_save_LIBS"
+CFLAGS="$kde_save_CFLAGS"
+
+fi
+if test ! "$ac_cv_lib_z" = no; then
+ cat >> confdefs.h <<EOF
+#define HAVE_LIBZ 1
+EOF
+
+ LIBZ="$ac_cv_lib_z"
+
+ echo "$ac_t""$ac_cv_lib_z" 1>&6
+else
+ { echo "configure: error: not found. Check your installation and look into config.log" 1>&2; exit 1; }
+ LIBZ=""
+
+fi
+
+
+echo $ac_n "checking for X""... $ac_c" 1>&6
+echo "configure:4500: checking for X" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+if eval "test \"`echo '$''{'kde_cv_have_x'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # One or both of the vars are not set, and there is no cached value.
+if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then
+ kde_x_includes=NO
+else
+ kde_x_includes=$x_includes
+fi
+if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then
+ kde_x_libraries=NO
+else
+ kde_x_libraries=$x_libraries
+fi
+
+# below we use the standard autoconf calls
+ac_x_libraries=$kde_x_libraries
+ac_x_includes=$kde_x_includes
+
+if test "$ac_x_includes" = NO; then
+ # Guess where to find include files, by looking for this one X11 .h file.
+ test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
+
+ # First, try using that file with no special directory specified.
+cat > conftest.$ac_ext <<EOF
+#line 4534 "configure"
+#include "confdefs.h"
+#include <$x_direct_test_include>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:4539: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ # We can compile using X headers with no special include directory.
+ac_x_includes=
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ # Look for the header file in a standard set of common directories.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+ for ac_dir in \
+ /usr/X11/include \
+ /usr/X11R6/include \
+ /usr/X11R5/include \
+ /usr/X11R4/include \
+ \
+ /usr/include/X11 \
+ /usr/include/X11R6 \
+ /usr/include/X11R5 \
+ /usr/include/X11R4 \
+ \
+ /usr/local/X11/include \
+ /usr/local/X11R6/include \
+ /usr/local/X11R5/include \
+ /usr/local/X11R4/include \
+ \
+ /usr/local/include/X11 \
+ /usr/local/include/X11R6 \
+ /usr/local/include/X11R5 \
+ /usr/local/include/X11R4 \
+ \
+ /usr/X386/include \
+ /usr/x386/include \
+ /usr/XFree86/include/X11 \
+ \
+ /usr/include \
+ /usr/local/include \
+ /usr/unsupported/include \
+ /usr/athena/include \
+ /usr/local/x11r5/include \
+ /usr/lpp/Xamples/include \
+ \
+ /usr/openwin/include \
+ /usr/openwin/share/include \
+ ; \
+ do
+ if test -r "$ac_dir/$x_direct_test_include"; then
+ ac_x_includes=$ac_dir
+ break
+ fi
+ done
+fi
+rm -f conftest*
+fi # $ac_x_includes = NO
+
+if test "$ac_x_libraries" = NO; then
+ # Check for the libraries.
+
+ test -z "$x_direct_test_library" && x_direct_test_library=Xt
+ test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
+
+ # See if we find them without any special options.
+ # Don't add to $LIBS permanently.
+ ac_save_LIBS="$LIBS"
+ LIBS="-l$x_direct_test_library $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4608 "configure"
+#include "confdefs.h"
+
+int main() {
+${x_direct_test_function}()
+; return 0; }
+EOF
+if { (eval echo configure:4615: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ LIBS="$ac_save_LIBS"
+# We can link X programs with no special library path.
+ac_x_libraries=
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ LIBS="$ac_save_LIBS"
+# First see if replacing the include by lib works.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
+ /usr/X11/lib \
+ /usr/X11R6/lib \
+ /usr/X11R5/lib \
+ /usr/X11R4/lib \
+ \
+ /usr/lib/X11 \
+ /usr/lib/X11R6 \
+ /usr/lib/X11R5 \
+ /usr/lib/X11R4 \
+ \
+ /usr/local/X11/lib \
+ /usr/local/X11R6/lib \
+ /usr/local/X11R5/lib \
+ /usr/local/X11R4/lib \
+ \
+ /usr/local/lib/X11 \
+ /usr/local/lib/X11R6 \
+ /usr/local/lib/X11R5 \
+ /usr/local/lib/X11R4 \
+ \
+ /usr/X386/lib \
+ /usr/x386/lib \
+ /usr/XFree86/lib/X11 \
+ \
+ /usr/lib \
+ /usr/local/lib \
+ /usr/unsupported/lib \
+ /usr/athena/lib \
+ /usr/local/x11r5/lib \
+ /usr/lpp/Xamples/lib \
+ /lib/usr/lib/X11 \
+ \
+ /usr/openwin/lib \
+ /usr/openwin/share/lib \
+ ; \
+do
+ for ac_extension in a so sl; do
+ if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
+ ac_x_libraries=$ac_dir
+ break 2
+ fi
+ done
+done
+fi
+rm -f conftest*
+fi # $ac_x_libraries = NO
+
+case "$host" in
+mips-sgi-irix6*)
+ ;;
+*)
+ rm -fr conftestdir
+if mkdir conftestdir; then
+ cd conftestdir
+ # Make sure to not put "make" in the Imakefile rules, since we grep it out.
+ cat > Imakefile <<'EOF'
+acfindx:
+ @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
+EOF
+ if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+ eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
+ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
+ for ac_extension in a so sl; do
+ if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
+ test -f $ac_im_libdir/libX11.$ac_extension; then
+ ac_im_usrlibdir=$ac_im_libdir; break
+ fi
+ done
+ # Screen out bogus values from the imake configuration. They are
+ # bogus both because they are the default anyway, and because
+ # using them would break gcc on systems where it needs fixed includes.
+ case "$ac_im_incroot" in
+ /usr/include) ;;
+ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
+ esac
+ case "$ac_im_usrlibdir" in
+ /usr/lib | /lib) ;;
+ *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
+ esac
+ fi
+ cd ..
+ rm -fr conftestdir
+fi
+
+ if test -z "$ac_x_includes"; then
+ ac_x_includes="."
+ fi
+ if test -z "$ac_x_libraries"; then
+ ac_x_libraries="/usr/lib"
+ fi
+esac
+#from now on we use our own again
+
+# when the user already gave --x-includes, we ignore
+# what the standard autoconf macros told us.
+if test "$kde_x_includes" = NO; then
+ kde_x_includes=$ac_x_includes
+fi
+
+# for --x-libraries too
+if test "$kde_x_libraries" = NO; then
+ kde_x_libraries=$ac_x_libraries
+fi
+
+if test "$kde_x_includes" = NO; then
+ { echo "configure: error: Can't find X includes. Please check your installation and add the correct paths!" 1>&2; exit 1; }
+fi
+
+if test "$kde_x_libraries" = NO; then
+ { echo "configure: error: Can't find X libraries. Please check your installation and add the correct paths!" 1>&2; exit 1; }
+fi
+
+# Record where we found X for the cache.
+kde_cv_have_x="have_x=yes \
+ kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries"
+
+fi
+eval "$kde_cv_have_x"
+
+if test "$have_x" != yes; then
+ echo "$ac_t""$have_x" 1>&6
+ no_x=yes
+else
+ echo "$ac_t""libraries $kde_x_libraries, headers $kde_x_includes" 1>&6
+fi
+
+if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then
+ X_INCLUDES=""
+ x_includes="."; else
+ x_includes=$kde_x_includes
+ X_INCLUDES="-I$x_includes"
+fi
+
+if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then
+ X_LDFLAGS=""
+ x_libraries="/usr/lib"; else
+ x_libraries=$kde_x_libraries
+ X_LDFLAGS="-L$x_libraries"
+fi
+all_includes="$X_INCLUDES"
+all_libraries="$X_LDFLAGS"
+
+
+
+
+
+
+# Check for libraries that X11R6 Xt/Xaw programs need.
+ac_save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS $X_LDFLAGS"
+# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
+# check for ICE first), but we must link in the order -lSM -lICE or
+# we get undefined symbols. So assume we have SM if we have ICE.
+# These have to be linked with before -lX11, unlike the other
+# libraries we check for below, so use a different variable.
+# --interran at uluru.Stanford.EDU, kb at cs.umb.edu.
+echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
+echo "configure:4786: checking for IceConnectionNumber in -lICE" >&5
+ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lICE $X_EXTRA_LIBS $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4794 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char IceConnectionNumber();
+
+int main() {
+IceConnectionNumber()
+; return 0; }
+EOF
+if { (eval echo configure:4805: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBSM="-lSM -lICE"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+LDFLAGS="$ac_save_LDFLAGS"
+
+
+
+LIB_X11='-lX11 $(LIBSOCKET)'
+
+
+echo $ac_n "checking for libXext""... $ac_c" 1>&6
+echo "configure:4834: checking for libXext" >&5
+if eval "test \"`echo '$''{'kde_cv_have_libXext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+kde_ldflags_safe="$LDFLAGS"
+kde_libs_safe="$LIBS"
+
+LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS"
+LIBS="-lXext -lX11 $LIBSOCKET"
+
+cat > conftest.$ac_ext <<EOF
+#line 4846 "configure"
+#include "confdefs.h"
+
+#include <stdio.h>
+
+int main() {
+
+printf("hello Xext\n");
+
+; return 0; }
+EOF
+if { (eval echo configure:4857: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ kde_cv_have_libXext=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ kde_cv_have_libXext=no
+
+fi
+rm -f conftest*
+
+LDFLAGS=$kde_ldflags_safe
+LIBS=$kde_libs_safe
+
+fi
+
+
+echo "$ac_t""$kde_cv_have_libXext" 1>&6
+
+if test "$kde_cv_have_libXext" = "no"; then
+ { echo "configure: error: We need a working libXext to proceed. Since configure
+can't find it itself, we stop here assuming that make wouldn't find
+them either." 1>&2; exit 1; }
+fi
+
+
+
+
+if test -z ""; then
+ kde_qtver=2
+ kde_qtsubver=1
+else
+ kde_qtsubver=`echo "" | sed -e 's#[0-9]\+\.\([0-9]\+\).*#\1#'`
+ # following is the check if subversion isn´t found in passed argument
+ if test "$kde_qtsubver" = ""; then
+ kde_qtsubver=1
+ fi
+ kde_qtver=`echo "" | sed -e 's#^\([0-9]\+\)\..*#\1#'`
+ if test "$kde_qtver" = "1"; then
+ kde_qtsubver=42
+ else
+ # this is the version number fallback to 2.1, unless major version is 1 or 2
+ if test "$kde_qtver" != "2"; then
+ kde_qtver=2
+ kde_qtsubver=1
+ fi
+ fi
+fi
+
+if test -z ""; then
+ if test $kde_qtver = 2; then
+ if test $kde_qtsubver -gt 0; then
+ kde_qt_minversion=">= Qt 2.2.2"
+ else
+ kde_qt_minversion=">= Qt 2.0.2"
+ fi
+ else
+ kde_qt_minversion=">= 1.42 and < 2.0"
+ fi
+else
+ kde_qt_minversion=
+fi
+
+if test -z ""; then
+ if test $kde_qtver = 2; then
+ if test $kde_qtsubver -gt 0; then
+ kde_qt_verstring="QT_VERSION >= 222"
+ else
+ kde_qt_verstring="QT_VERSION >= 200"
+ fi
+ else
+ kde_qt_verstring="QT_VERSION >= 142 && QT_VERSION < 200"
+ fi
+else
+ kde_qt_verstring=
+fi
+
+if test $kde_qtver = 2; then
+ kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt"
+else
+ kde_qt_dirs="$QTDIR /usr/lib/qt"
+fi
+
+
+
+
+echo $ac_n "checking for libpng""... $ac_c" 1>&6
+echo "configure:4945: checking for libpng" >&5
+if eval "test \"`echo '$''{'ac_cv_lib_png'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+kde_save_LIBS="$LIBS"
+LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET"
+kde_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext <<EOF
+#line 4962 "configure"
+#include "confdefs.h"
+
+ #include<png.h>
+
+int main() {
+
+ png_structp png_ptr = png_create_read_struct( /* image ptr */
+ PNG_LIBPNG_VER_STRING, 0, 0, 0 );
+ return( png_ptr != 0 );
+
+; return 0; }
+EOF
+if { (eval echo configure:4975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_png='-lpng $LIBZ -lm'"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_png=no"
+
+fi
+rm -f conftest*
+LIBS="$kde_save_LIBS"
+CFLAGS="$kde_save_CFLAGS"
+
+fi
+if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then
+ cat >> confdefs.h <<EOF
+#define HAVE_LIBPNG 1
+EOF
+
+ LIBPNG="$ac_cv_lib_png"
+
+ echo "$ac_t""$ac_cv_lib_png" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+ LIBPNG=""
+
+fi
+
+
+
+echo $ac_n "checking for libjpeg6b""... $ac_c" 1>&6
+echo "configure:5007: checking for libjpeg6b" >&5
+if eval "test \"`echo '$''{'ac_cv_lib_jpeg_6b'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -ljpeg6b -lm"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+cat > conftest.$ac_ext <<EOF
+#line 5024 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+struct jpeg_decompress_struct;
+typedef struct jpeg_decompress_struct * j_decompress_ptr;
+typedef int size_t;
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void jpeg_CreateDecompress(j_decompress_ptr cinfo,
+ int version, size_t structsize);
+#ifdef __cplusplus
+}
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+
+int main() {
+jpeg_CreateDecompress(0L, 0, 0);
+; return 0; }
+EOF
+if { (eval echo configure:5045: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_jpeg_6b=-ljpeg6b"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_jpeg_6b=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+CFLAGS="$ac_save_CFLAGS"
+
+fi
+
+
+if eval "test ! \"`echo $ac_cv_lib_jpeg_6b`\" = no"; then
+ LIBJPEG="$ac_cv_lib_jpeg_6b"
+ echo "$ac_t""$ac_cv_lib_jpeg_6b" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+
+echo $ac_n "checking for libjpeg""... $ac_c" 1>&6
+echo "configure:5068: checking for libjpeg" >&5
+if eval "test \"`echo '$''{'ac_cv_lib_jpeg_normal'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -ljpeg -lm"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+cat > conftest.$ac_ext <<EOF
+#line 5085 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+struct jpeg_decompress_struct;
+typedef struct jpeg_decompress_struct * j_decompress_ptr;
+typedef int size_t;
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void jpeg_CreateDecompress(j_decompress_ptr cinfo,
+ int version, size_t structsize);
+#ifdef __cplusplus
+}
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+
+int main() {
+jpeg_CreateDecompress(0L, 0, 0);
+; return 0; }
+EOF
+if { (eval echo configure:5106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_jpeg_normal=-ljpeg"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_jpeg_normal=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+CFLAGS="$ac_save_CFLAGS"
+
+fi
+
+
+if eval "test ! \"`echo $ac_cv_lib_jpeg_normal`\" = no"; then
+ LIBJPEG="$ac_cv_lib_jpeg_normal"
+ echo "$ac_t""$ac_cv_lib_jpeg_normal" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+
+ if test -f "$kde_libraries/libjpeg.so"; then
+ test -f ./libjpegkde.so || $LN_S $kde_libraries/libjpeg.so ./libjpegkde.so
+ ac_cv_lib_jpeg="-L\${topdir} -ljpegkde"
+ else if test -f "$kde_libraries/libjpeg.sl"; then
+ test -f ./libjpegkde.sl ||$LN_S $kde_libraries/libjpeg.sl ./libjpegkde.sl
+ ac_cv_lib_jpeg="-L\${topdir} -ljpegkde"
+ else if test -f "$kde_libraries/libjpeg.a"; then
+ test -f ./libjpegkde.a || $LN_S $kde_libraries/libjpeg.a ./libjpegkde.a
+ ac_cv_lib_jpeg="-L\${topdir} -ljpegkde"
+ else
+ ac_cv_lib_jpeg=
+ fi
+ fi
+ fi
+
+ LIBJPEG=$ac_cv_lib_jpeg
+
+fi
+
+
+fi
+
+
+
+jpeg_incdirs="/usr/include /usr/local/include $kde_extra_includes"
+
+jpeg_incdir=NO
+for i in $jpeg_incdirs;
+do
+ for j in jpeglib.h;
+ do
+ if test -r "$i/$j"; then
+ jpeg_incdir=$i
+ break 2
+ fi
+ done
+done
+
+test "x$jpeg_incdir" = xNO && jpeg_incdir=
+
+if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then
+ cat >> confdefs.h <<EOF
+#define HAVE_LIBJPEG 1
+EOF
+
+else
+ if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then
+ echo "configure: warning:
+There is an installation error in jpeg support. You seem to have only one
+of either the headers _or_ the libraries installed. You may need to either
+provide correct --with-extra-... options, or the development package of
+libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
+Disabling JPEG support.
+" 1>&2
+ else
+ echo "configure: warning: libjpeg not found. disable JPEG support." 1>&2
+ fi
+ jpeg_incdir=
+ LIBJPEG=
+fi
+
+
+
+
+
+
+
+
+
+# Check whether --enable-mt or --disable-mt was given.
+if test "${enable_mt+set}" = set; then
+ enableval="$enable_mt"
+ kde_use_qt_mt=$enableval
+else
+ kde_use_qt_mt=no
+
+fi
+
+
+USING_QT_MT=""
+
+
+if test "x$kde_use_qt_mt" = "xyes"; then
+
+ case $host in
+ *-*-linux-*)
+ if test "x$GCC" = "xyes"; then
+ CPPFLAGS="$CPPFLAGS -DQT_THREAD_SUPPORT -pthread"
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -pthread"
+ else
+ echo "configure: warning: Compiler is not gcc. MT support disabled." 1>&2
+ fi
+ ;;
+ *)
+ echo "configure: warning: MT not yet supported on $host - disabled." 1>&2
+ ;;
+ esac
+
+fi
+
+kde_qt_was_given=yes
+
+
+if test -z "$LIBQT_GLOB"; then
+
+ LIBQT_GLOB="libqt.*"
+
+fi
+
+if test -z "$LIBQT"; then
+
+ LIBQT="-lqt"
+ kde_int_qt="-lqt"
+
+
+ if test "x$kde_use_qt_mt" = "xyes"; then
+
+ case $host in
+ *-*-linux-*)
+ if test "x$GCC" = "xyes"; then
+ LIBQT="-lqt-mt"
+ kde_int_qt="-lqt-mt"
+ LIBQT_GLOB="libqt-mt.*"
+ USING_QT_MT="using -mt"
+ fi
+ ;;
+ esac
+ fi
+
+ kde_qt_was_given=no
+
+else
+ kde_int_qt="$LIBQT"
+fi
+
+if test $kde_qtver = 2; then
+
+
+
+ LIBQT="$LIBQT $LIBPNG $LIBJPEG"
+fi
+
+echo $ac_n "checking for Qt""... $ac_c" 1>&6
+echo "configure:5271: checking for Qt" >&5
+
+LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET"
+ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO
+qt_libraries=""
+qt_includes=""
+# Check whether --with-qt-dir or --without-qt-dir was given.
+if test "${with_qt_dir+set}" = set; then
+ withval="$with_qt_dir"
+ ac_qt_includes="$withval"/include
+ ac_qt_libraries="$withval"/lib
+ ac_qt_bindir="$withval"/bin
+
+fi
+
+
+# Check whether --with-qt-includes or --without-qt-includes was given.
+if test "${with_qt_includes+set}" = set; then
+ withval="$with_qt_includes"
+
+ ac_qt_includes="$withval"
+
+fi
+
+
+kde_qt_libs_given=no
+
+# Check whether --with-qt-libraries or --without-qt-libraries was given.
+if test "${with_qt_libraries+set}" = set; then
+ withval="$with_qt_libraries"
+ ac_qt_libraries="$withval"
+ kde_qt_libs_given=yes
+
+fi
+
+
+if eval "test \"`echo '$''{'ac_cv_have_qt'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ #try to guess Qt locations
+
+qt_incdirs=""
+for dir in $kde_qt_dirs; do
+ qt_incdirs="$qt_incdirs $dir/include $dir"
+done
+qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt $x_includes"
+if test ! "$ac_qt_includes" = "NO"; then
+ qt_incdirs="$ac_qt_includes $qt_incdirs"
+fi
+
+if test "$kde_qtver" = "2"; then
+ kde_qt_header=qstyle.h
+else
+ kde_qt_header=qglobal.h
+fi
+
+
+qt_incdir=NO
+for i in $qt_incdirs;
+do
+ for j in $kde_qt_header;
+ do
+ if test -r "$i/$j"; then
+ qt_incdir=$i
+ break 2
+ fi
+ done
+done
+
+ac_qt_includes="$qt_incdir"
+
+qt_libdirs=""
+for dir in $kde_qt_dirs; do
+ qt_libdirs="$qt_libdirs $dir/lib $dir"
+done
+qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries"
+if test ! "$ac_qt_libraries" = "NO"; then
+ qt_libdir=$ac_qt_libraries
+else
+ qt_libdirs="$ac_qt_libraries $qt_libdirs"
+ # if the Qt was given, the chance is too big that libqt.* doesn't exist
+ qt_libdir=NONE
+ for dir in $qt_libdirs; do
+ try="ls -1 $dir/${LIBQT_GLOB}"
+ if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&5 ; fi
+ done
+fi
+
+ac_qt_libraries="$qt_libdir"
+
+
+ ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+
+
+
+ac_cxxflags_safe="$CXXFLAGS"
+ac_ldflags_safe="$LDFLAGS"
+ac_libs_safe="$LIBS"
+
+CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
+LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS"
+LIBS="$LIBS $LIBQT"
+
+
+
+cat > conftest.$ac_ext <<EOF
+#include "confdefs.h"
+#include <qglobal.h>
+#include <qapplication.h>
+#include <qapp.h>
+#include <qobjcoll.h>
+EOF
+if test "$kde_qtver" = "2"; then
+cat >> conftest.$ac_ext <<EOF
+#include <qevent.h>
+#include <qstring.h>
+#include <qstyle.h>
+EOF
+
+if test $kde_qtsubver -gt 0; then
+cat >> conftest.$ac_ext <<EOF
+#include <qiconview.h>
+EOF
+fi
+
+fi
+
+echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
+cat >> conftest.$ac_ext <<EOF
+#error 1
+#endif
+
+int main() {
+EOF
+if test "$kde_qtver" = "2"; then
+cat >> conftest.$ac_ext <<EOF
+ QStringList *t = new QStringList();
+EOF
+if test $kde_qtsubver -gt 0; then
+cat >> conftest.$ac_ext <<EOF
+ QIconView iv(0);
+ iv.setWordWrapIconText(false);
+ QString s;
+ s.setLatin1("Elvis is alive", 14);
+ int magnolia = QEvent::Speech; /* new in 2.2 beta2 */
+EOF
+fi
+fi
+cat >> conftest.$ac_ext <<EOF
+ return 0;
+}
+EOF
+
+
+if { (eval echo configure:5432: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -f conftest*
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_qt_libraries="NO"
+fi
+rm -f conftest*
+CXXFLAGS="$ac_cxxflags_safe"
+LDFLAGS="$ac_ldflags_safe"
+LIBS="$ac_libs_safe"
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then
+ ac_cv_have_qt="have_qt=no"
+ ac_qt_notfound=""
+ if test "$ac_qt_includes" = NO; then
+ if test "$ac_qt_libraries" = NO; then
+ ac_qt_notfound="(headers and libraries)";
+ else
+ ac_qt_notfound="(headers)";
+ fi
+ else
+ ac_qt_notfound="(libraries)";
+ fi
+
+ { echo "configure: error: Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation!
+For more details about this problem, look at the end of config.log." 1>&2; exit 1; }
+else
+ have_qt="yes"
+fi
+
+fi
+
+
+eval "$ac_cv_have_qt"
+
+if test "$have_qt" != yes; then
+ echo "$ac_t""$have_qt" 1>&6;
+else
+ ac_cv_have_qt="have_qt=yes \
+ ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries"
+ echo "$ac_t""libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT" 1>&6
+
+ qt_libraries="$ac_qt_libraries"
+ qt_includes="$ac_qt_includes"
+fi
+
+if test ! "$kde_qt_libs_given" = "yes"; then
+
+
+echo $ac_n "checking if Qt compiles without flags""... $ac_c" 1>&6
+echo "configure:5490: checking if Qt compiles without flags" >&5
+if eval "test \"`echo '$''{'kde_cv_qt_direct'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+
+ ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+
+
+ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH
+ac_LIBRARY_PATH="$LIBRARY_PATH"
+ac_cxxflags_safe="$CXXFLAGS"
+ac_ldflags_safe="$LDFLAGS"
+ac_libs_safe="$LIBS"
+
+CXXFLAGS="$CXXFLAGS -I$qt_includes"
+LDFLAGS="$LDFLAGS $X_LDFLAGS"
+LIBS="$LIBQT -lXext -lX11 $LIBSOCKET"
+LD_LIBRARY_PATH=
+export LD_LIBRARY_PATH
+LIBRARY_PATH=
+export LIBRARY_PATH
+
+
+
+cat > conftest.$ac_ext <<EOF
+#include "confdefs.h"
+#include <qglobal.h>
+#include <qapplication.h>
+#include <qapp.h>
+#include <qobjcoll.h>
+EOF
+if test "$kde_qtver" = "2"; then
+cat >> conftest.$ac_ext <<EOF
+#include <qevent.h>
+#include <qstring.h>
+#include <qstyle.h>
+EOF
+
+if test $kde_qtsubver -gt 0; then
+cat >> conftest.$ac_ext <<EOF
+#include <qiconview.h>
+EOF
+fi
+
+fi
+
+echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
+cat >> conftest.$ac_ext <<EOF
+#error 1
+#endif
+
+int main() {
+EOF
+if test "$kde_qtver" = "2"; then
+cat >> conftest.$ac_ext <<EOF
+ QStringList *t = new QStringList();
+EOF
+if test $kde_qtsubver -gt 0; then
+cat >> conftest.$ac_ext <<EOF
+ QIconView iv(0);
+ iv.setWordWrapIconText(false);
+ QString s;
+ s.setLatin1("Elvis is alive", 14);
+ int magnolia = QEvent::Speech; /* new in 2.2 beta2 */
+EOF
+fi
+fi
+cat >> conftest.$ac_ext <<EOF
+ return 0;
+}
+EOF
+
+
+if { (eval echo configure:5571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ kde_cv_qt_direct="yes"
+else
+ kde_cv_qt_direct="no"
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+
+rm -f conftest*
+CXXFLAGS="$ac_cxxflags_safe"
+LDFLAGS="$ac_ldflags_safe"
+LIBS="$ac_libs_safe"
+
+LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe"
+export LD_LIBRARY_PATH
+LIBRARY_PATH="$ac_LIBRARY_PATH"
+export LIBRARY_PATH
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+
+fi
+
+
+if test "$kde_cv_qt_direct" = "yes"; then
+ echo "$ac_t""yes" 1>&6
+ qt_libraries=
+else
+ echo "$ac_t""no" 1>&6
+
+fi
+
+fi
+
+
+
+
+if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then
+ QT_INCLUDES="";
+else
+ QT_INCLUDES="-I$qt_includes"
+ all_includes="$QT_INCLUDES $all_includes"
+fi
+
+if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then
+ QT_LDFLAGS=""
+else
+ QT_LDFLAGS="-L$qt_libraries"
+ all_libraries="$all_libraries $QT_LDFLAGS"
+fi
+
+
+
+
+ qt_bindirs=""
+ for dir in $kde_qt_dirs; do
+ qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc"
+ done
+ qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin"
+ if test ! "$ac_qt_bindir" = "NO"; then
+ qt_bindirs="$ac_qt_bindir $qt_bindirs"
+ fi
+
+
+ echo $ac_n "checking for moc""... $ac_c" 1>&6
+echo "configure:5640: checking for moc" >&5
+ if test -n "$MOC"; then
+ kde_cv_path="$MOC";
+ else
+ kde_cache=`echo moc | sed 'y%./+-%__p_%'`
+
+ if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ kde_cv_path="NONE"
+ dirs="$qt_bindirs"
+ kde_save_IFS=$IFS
+ IFS=':'
+ for dir in $PATH; do
+ dirs="$dirs $dir"
+ done
+ IFS=$kde_save_IFS
+
+ for dir in $dirs; do
+ if test -x "$dir/moc"; then
+ if test -n ""
+ then
+ evalstr="$dir/moc 2>&1 "
+ if eval $evalstr; then
+ kde_cv_path="$dir/moc"
+ break
+ fi
+ else
+ kde_cv_path="$dir/moc"
+ break
+ fi
+ fi
+ done
+
+ eval "kde_cv_path_$kde_cache=$kde_cv_path"
+
+
+fi
+
+
+ eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
+
+ fi
+
+ if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
+ echo "$ac_t""not found" 1>&6
+
+ { echo "configure: error: No Qt meta object compiler (moc) found!
+Please check whether you installed Qt correctly.
+You need to have a running moc binary.
+configure tried to run $ac_cv_path_moc and the test didn't
+succeed. If configure shouldn't have tried this one, set
+the environment variable MOC to the right one before running
+configure.
+" 1>&2; exit 1; }
+
+ else
+ echo "$ac_t""$kde_cv_path" 1>&6
+ MOC=$kde_cv_path
+
+ fi
+
+
+ echo $ac_n "checking for uic""... $ac_c" 1>&6
+echo "configure:5705: checking for uic" >&5
+ if test -n "$UIC"; then
+ kde_cv_path="$UIC";
+ else
+ kde_cache=`echo uic | sed 'y%./+-%__p_%'`
+
+ if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ kde_cv_path="NONE"
+ dirs="$qt_bindirs"
+ kde_save_IFS=$IFS
+ IFS=':'
+ for dir in $PATH; do
+ dirs="$dirs $dir"
+ done
+ IFS=$kde_save_IFS
+
+ for dir in $dirs; do
+ if test -x "$dir/uic"; then
+ if test -n ""
+ then
+ evalstr="$dir/uic 2>&1 "
+ if eval $evalstr; then
+ kde_cv_path="$dir/uic"
+ break
+ fi
+ else
+ kde_cv_path="$dir/uic"
+ break
+ fi
+ fi
+ done
+
+ eval "kde_cv_path_$kde_cache=$kde_cv_path"
+
+
+fi
+
+
+ eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
+
+ fi
+
+ if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
+ echo "$ac_t""not found" 1>&6
+ UIC="" ;
+ echo "configure: warning: No Qt ui compiler (uic) found!
+Please check whether you installed Qt correctly.
+You need to have a running uic binary.
+configure tried to run $ac_cv_path_uic and the test didn't
+succeed. If configure shouldn't have tried this one, set
+the environment variable UIC to the right one before running
+configure.
+" 1>&2
+
+ else
+ echo "$ac_t""$kde_cv_path" 1>&6
+ UIC=$kde_cv_path
+
+ fi
+
+ if test -z "$UIC" ; then
+ if test -z "$UIC_NOT_NEEDED" ; then
+ exit 1
+ else
+ UIC="echo uic not available: "
+ fi
+ fi
+
+
+
+
+LIB_QT="$kde_int_qt "'$(LIBPNG) $(LIBJPEG) -lXext $(LIB_X11) $(LIBSM)'
+
+
+
+
+
+
+
+
+echo $ac_n "checking for rpath""... $ac_c" 1>&6
+echo "configure:5789: checking for rpath" >&5
+# Check whether --enable-rpath or --disable-rpath was given.
+if test "${enable_rpath+set}" = set; then
+ enableval="$enable_rpath"
+ USE_RPATH=$enableval
+else
+ USE_RPATH=yes
+fi
+
+
+if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then
+
+ KDE_RPATH="-R \$(kde_libraries)"
+
+ if test -n "$qt_libraries"; then
+ KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)"
+ fi
+ if test -n "$X_LDFLAGS"; then
+ KDE_RPATH="$KDE_RPATH -R \$(x_libraries)"
+ fi
+ if test -n "$KDE_EXTRA_RPATH"; then
+ KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)"
+ fi
+fi
+
+
+echo "$ac_t""$USE_RPATH" 1>&6
+
+echo $ac_n "checking for KDE""... $ac_c" 1>&6
+echo "configure:5818: checking for KDE" >&5
+
+if test "${prefix}" != NONE; then
+ kde_includes=${prefix}/include
+ ac_kde_includes=$prefix/include
+
+ if test "${exec_prefix}" != NONE; then
+ kde_libraries=${exec_prefix}/lib
+ ac_kde_libraries=$exec_prefix/lib
+ else
+ kde_libraries=${prefix}/lib
+ ac_kde_libraries=$prefix/lib
+ fi
+else
+ ac_kde_includes=
+ ac_kde_libraries=
+ kde_libraries=""
+ kde_includes=""
+fi
+
+if eval "test \"`echo '$''{'ac_cv_have_kde'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ #try to guess kde locations
+
+if test "$kde_qtver" = 1; then
+ kde_check_header="ksock.h"
+ kde_check_lib="libkdecore.la"
+else
+ kde_check_header="ksharedptr.h"
+ kde_check_lib="libkio.la"
+fi
+
+if test -z ""; then
+
+kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/kde/include /usr/include/kde /usr/include /opt/kde2/include /opt/kde/include $x_includes $qt_includes"
+test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs"
+kde_incdirs="$ac_kde_includes $kde_incdirs"
+
+kde_incdir=NO
+for i in $kde_incdirs;
+do
+ for j in $kde_check_header;
+ do
+ if test -r "$i/$j"; then
+ kde_incdir=$i
+ break 2
+ fi
+ done
+done
+
+ac_kde_includes="$kde_incdir"
+
+if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then
+ { echo "configure: error:
+in the prefix, you've chosen, are no KDE headers installed. This will fail.
+So, check this please and use another prefix!" 1>&2; exit 1; }
+fi
+
+kde_libdirs="/usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib /usr/X11R6/lib /opt/kde2/lib /opt/kde/lib /usr/X11R6/kde/lib"
+test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib $KDEDIR $kde_libdirs"
+kde_libdirs="$ac_kde_libraries $kde_libdirs"
+
+kde_libdir=NO
+for i in $kde_libdirs;
+do
+ for j in $kde_check_lib;
+ do
+ if test -r "$i/$j"; then
+ kde_libdir=$i
+ break 2
+ fi
+ done
+done
+
+ac_kde_libraries="$kde_libdir"
+
+if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then
+{ echo "configure: error:
+in the prefix, you've chosen, are no KDE libraries installed. This will fail.
+So, check this please and use another prefix!" 1>&2; exit 1; }
+fi
+ac_kde_libraries="$kde_libdir"
+
+if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO; then
+ ac_cv_have_kde="have_kde=no"
+else
+ ac_cv_have_kde="have_kde=yes \
+ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
+fi
+
+else
+ ac_cv_have_kde="have_kde=no"
+
+fi
+
+fi
+
+eval "$ac_cv_have_kde"
+
+if test "$have_kde" != "yes"; then
+ if test "${prefix}" = NONE; then
+ ac_kde_prefix="$ac_default_prefix"
+ else
+ ac_kde_prefix="$prefix"
+ fi
+ if test "$exec_prefix" = NONE; then
+ ac_kde_exec_prefix="$ac_kde_prefix"
+ echo "$ac_t""will be installed in $ac_kde_prefix" 1>&6
+ else
+ ac_kde_exec_prefix="$exec_prefix"
+ echo "$ac_t""will be installed in $ac_kde_prefix and $ac_kde_exec_prefix" 1>&6
+ fi
+
+ kde_libraries="${ac_kde_exec_prefix}/lib"
+ kde_includes=${ac_kde_prefix}/include
+
+else
+ ac_cv_have_kde="have_kde=yes \
+ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
+ echo "$ac_t""libraries $ac_kde_libraries, headers $ac_kde_includes" 1>&6
+
+ kde_libraries="$ac_kde_libraries"
+ kde_includes="$ac_kde_includes"
+fi
+
+
+
+if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" ; then
+ KDE_INCLUDES=""
+else
+ KDE_INCLUDES="-I$kde_includes"
+ all_includes="$KDE_INCLUDES $all_includes"
+fi
+
+KDE_LDFLAGS="-L$kde_libraries"
+if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then
+ all_libraries="$all_libraries $KDE_LDFLAGS"
+fi
+
+
+
+
+
+
+all_libraries="$all_libraries $USER_LDFLAGS"
+all_includes="$all_includes $USER_INCLUDES"
+
+
+
+
+
+ # Check whether --enable-path-check or --disable-path-check was given.
+if test "${enable_path_check+set}" = set; then
+ enableval="$enable_path_check"
+
+ if test "$enableval" = "no";
+ then ac_use_path_checking="default"
+ else ac_use_path_checking=""
+ fi
+
+else
+
+ if test "$kde_qtver" = 1;
+ then ac_use_path_checking=""
+ else ac_use_path_checking="default"
+ fi
+
+
+fi
+
+
+
+
+
+echo $ac_n "checking for KDE paths""... $ac_c" 1>&6
+echo "configure:5994: checking for KDE paths" >&5
+kde_result=""
+kde_cached_paths=yes
+if eval "test \"`echo '$''{'kde_cv_all_paths'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+
+if test "$ac_use_path_checking" = "default"; then
+
+ if test -z "$kde_htmldir"; then
+ kde_htmldir='\${prefix}/share/doc/HTML'
+ fi
+ if test -z "$kde_appsdir"; then
+ kde_appsdir='\${prefix}/share/applnk'
+ fi
+ if test -z "$kde_icondir"; then
+ kde_icondir='\${prefix}/share/icons'
+ fi
+ if test -z "$kde_sounddir"; then
+ kde_sounddir='\${prefix}/share/sounds'
+ fi
+ if test -z "$kde_datadir"; then
+ kde_datadir='\${prefix}/share/apps'
+ fi
+ if test -z "$kde_locale"; then
+ kde_locale='\${prefix}/share/locale'
+ fi
+ if test -z "$kde_cgidir"; then
+ kde_cgidir='\${exec_prefix}/cgi-bin'
+ fi
+ if test -z "$kde_confdir"; then
+ kde_confdir='\${prefix}/share/config'
+ fi
+ if test -z "$kde_mimedir"; then
+ kde_mimedir='\${prefix}/share/mimelnk'
+ fi
+ if test -z "$kde_toolbardir"; then
+ kde_toolbardir='\${prefix}/share/toolbar'
+ fi
+ if test -z "$kde_wallpaperdir"; then
+ kde_wallpaperdir='\${prefix}/share/wallpapers'
+ fi
+ if test -z "$kde_templatesdir"; then
+ kde_templatesdir='\${prefix}/share/templates'
+ fi
+ if test -z "$kde_bindir"; then
+ kde_bindir='\${exec_prefix}/bin'
+ fi
+ if test -z "$kde_servicesdir"; then
+ kde_servicesdir='\${prefix}/share/services'
+ fi
+ if test -z "$kde_servicetypesdir"; then
+ kde_servicetypesdir='\${prefix}/share/servicetypes'
+ fi
+ if test -z "$kde_moduledir"; then
+ kde_moduledir='\${prefix}/lib/kde2'
+ fi
+
+
+ kde_cv_all_paths="kde_have_all_paths=\"yes\" \
+ kde_htmldir=\"$kde_htmldir\" \
+ kde_appsdir=\"$kde_appsdir\" \
+ kde_icondir=\"$kde_icondir\" \
+ kde_sounddir=\"$kde_sounddir\" \
+ kde_datadir=\"$kde_datadir\" \
+ kde_locale=\"$kde_locale\" \
+ kde_cgidir=\"$kde_cgidir\" \
+ kde_confdir=\"$kde_confdir\" \
+ kde_mimedir=\"$kde_mimedir\" \
+ kde_toolbardir=\"$kde_toolbardir\" \
+ kde_wallpaperdir=\"$kde_wallpaperdir\" \
+ kde_templatesdir=\"$kde_templatesdir\" \
+ kde_bindir=\"$kde_bindir\" \
+ kde_servicesdir=\"$kde_servicesdir\" \
+ kde_servicetypesdir=\"$kde_servicetypesdir\" \
+ kde_moduledir=\"$kde_moduledir\" \
+ kde_result=defaults"
+
+
+else
+
+ if test $kde_qtver = 1; then
+ echo "$ac_t""compiling" 1>&6
+
+
+ echo $ac_n "checking for KDE headers installed""... $ac_c" 1>&6
+echo "configure:6081: checking for KDE headers installed" >&5
+
+ ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+
+
+cat > conftest.$ac_ext <<EOF
+#include <stdio.h>
+#include "confdefs.h"
+#include <kapp.h>
+
+int main() {
+ printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data());
+ printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data());
+ printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data());
+ printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data());
+ printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data());
+ printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data());
+ printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data());
+ printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data());
+ printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data());
+ printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data());
+ printf("kde_wallpaperdir=\\"%s\\"\n",
+ KApplication::kde_wallpaperdir().data());
+ printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data());
+ printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data());
+ printf("kde_servicesdir=\\"/tmp/dummy\\"\n");
+ printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n");
+ printf("kde_moduledir=\\"/tmp/dummy\\"\n");
+ return 0;
+ }
+EOF
+
+ ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext'
+ if { (eval echo configure:6121: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo "$ac_t""yes" 1>&6
+ else
+ { echo "configure: error: your system is not able to compile a small KDE application!
+Check, if you installed the KDE header files correctly.
+For more details about this problem, look at the end of config.log." 1>&2; exit 1; }
+ fi
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+
+
+ KDE_TEST_RPATH=
+
+ if test -n "$USE_RPATH"; then
+
+ if test -n "$kde_libraries"; then
+ KDE_TEST_RPATH="-R $kde_libraries"
+ fi
+
+ if test -n "$qt_libraries"; then
+ KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries"
+ fi
+
+ if test -n "$x_libraries"; then
+ KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries"
+ fi
+
+ KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH"
+ fi
+
+echo $ac_n "checking for KDE libraries installed""... $ac_c" 1>&6
+echo "configure:6158: checking for KDE libraries installed" >&5
+ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5'
+
+if { (eval echo configure:6161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ echo "$ac_t""yes" 1>&6
+else
+ { echo "configure: error: your system fails at linking a small KDE application!
+Check, if your compiler is installed correctly and if you have used the
+same compiler to compile Qt and kdelibs as you did use now.
+For more details about this problem, look at the end of config.log." 1>&2; exit 1; }
+fi
+
+if eval `KDEDIR= ./conftest 2>&5`; then
+ kde_result=done
+else
+ kde_result=problems
+fi
+
+KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
+kde_have_all_paths=yes
+
+
+ kde_cv_all_paths="kde_have_all_paths=\"yes\" \
+ kde_htmldir=\"$kde_htmldir\" \
+ kde_appsdir=\"$kde_appsdir\" \
+ kde_icondir=\"$kde_icondir\" \
+ kde_sounddir=\"$kde_sounddir\" \
+ kde_datadir=\"$kde_datadir\" \
+ kde_locale=\"$kde_locale\" \
+ kde_cgidir=\"$kde_cgidir\" \
+ kde_confdir=\"$kde_confdir\" \
+ kde_mimedir=\"$kde_mimedir\" \
+ kde_toolbardir=\"$kde_toolbardir\" \
+ kde_wallpaperdir=\"$kde_wallpaperdir\" \
+ kde_templatesdir=\"$kde_templatesdir\" \
+ kde_bindir=\"$kde_bindir\" \
+ kde_servicesdir=\"$kde_servicesdir\" \
+ kde_servicetypesdir=\"$kde_servicetypesdir\" \
+ kde_moduledir=\"$kde_moduledir\" \
+ kde_result=$kde_result"
+
+
+
+ else
+ { echo "configure: error: path checking not yet supported for KDE 2" 1>&2; exit 1; }
+ fi
+
+fi
+
+ kde_cached_paths=no
+
+fi
+
+eval "$kde_cv_all_paths"
+ if test -z "$kde_htmldir" || test -z "$kde_appsdir" ||
+ test -z "$kde_icondir" || test -z "$kde_sounddir" ||
+ test -z "$kde_datadir" || test -z "$kde_locale" ||
+ test -z "$kde_cgidir" || test -z "$kde_confdir" ||
+ test -z "$kde_mimedir" || test -z "$kde_toolbardir" ||
+ test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" ||
+ test -z "$kde_bindir" || test -z "$kde_servicesdir" ||
+ test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" ||
+ test "$kde_have_all_paths" != "yes"; then
+ kde_have_all_paths=no
+ fi
+
+if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then
+ # wrong values were cached, may be, we can set better ones
+ kde_result=
+ kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir=
+ kde_datadir= kde_locale= kde_cgidir= kde_confdir=
+ kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir=
+ kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir=
+ kde_have_all_paths=
+
+if test "$ac_use_path_checking" = "default"; then
+
+ if test -z "$kde_htmldir"; then
+ kde_htmldir='\${prefix}/share/doc/HTML'
+ fi
+ if test -z "$kde_appsdir"; then
+ kde_appsdir='\${prefix}/share/applnk'
+ fi
+ if test -z "$kde_icondir"; then
+ kde_icondir='\${prefix}/share/icons'
+ fi
+ if test -z "$kde_sounddir"; then
+ kde_sounddir='\${prefix}/share/sounds'
+ fi
+ if test -z "$kde_datadir"; then
+ kde_datadir='\${prefix}/share/apps'
+ fi
+ if test -z "$kde_locale"; then
+ kde_locale='\${prefix}/share/locale'
+ fi
+ if test -z "$kde_cgidir"; then
+ kde_cgidir='\${exec_prefix}/cgi-bin'
+ fi
+ if test -z "$kde_confdir"; then
+ kde_confdir='\${prefix}/share/config'
+ fi
+ if test -z "$kde_mimedir"; then
+ kde_mimedir='\${prefix}/share/mimelnk'
+ fi
+ if test -z "$kde_toolbardir"; then
+ kde_toolbardir='\${prefix}/share/toolbar'
+ fi
+ if test -z "$kde_wallpaperdir"; then
+ kde_wallpaperdir='\${prefix}/share/wallpapers'
+ fi
+ if test -z "$kde_templatesdir"; then
+ kde_templatesdir='\${prefix}/share/templates'
+ fi
+ if test -z "$kde_bindir"; then
+ kde_bindir='\${exec_prefix}/bin'
+ fi
+ if test -z "$kde_servicesdir"; then
+ kde_servicesdir='\${prefix}/share/services'
+ fi
+ if test -z "$kde_servicetypesdir"; then
+ kde_servicetypesdir='\${prefix}/share/servicetypes'
+ fi
+ if test -z "$kde_moduledir"; then
+ kde_moduledir='\${prefix}/lib/kde2'
+ fi
+
+
+ kde_cv_all_paths="kde_have_all_paths=\"yes\" \
+ kde_htmldir=\"$kde_htmldir\" \
+ kde_appsdir=\"$kde_appsdir\" \
+ kde_icondir=\"$kde_icondir\" \
+ kde_sounddir=\"$kde_sounddir\" \
+ kde_datadir=\"$kde_datadir\" \
+ kde_locale=\"$kde_locale\" \
+ kde_cgidir=\"$kde_cgidir\" \
+ kde_confdir=\"$kde_confdir\" \
+ kde_mimedir=\"$kde_mimedir\" \
+ kde_toolbardir=\"$kde_toolbardir\" \
+ kde_wallpaperdir=\"$kde_wallpaperdir\" \
+ kde_templatesdir=\"$kde_templatesdir\" \
+ kde_bindir=\"$kde_bindir\" \
+ kde_servicesdir=\"$kde_servicesdir\" \
+ kde_servicetypesdir=\"$kde_servicetypesdir\" \
+ kde_moduledir=\"$kde_moduledir\" \
+ kde_result=defaults"
+
+
+else
+
+ if test $kde_qtver = 1; then
+ echo "$ac_t""compiling" 1>&6
+
+
+ echo $ac_n "checking for KDE headers installed""... $ac_c" 1>&6
+echo "configure:6312: checking for KDE headers installed" >&5
+
+ ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+
+
+cat > conftest.$ac_ext <<EOF
+#include <stdio.h>
+#include "confdefs.h"
+#include <kapp.h>
+
+int main() {
+ printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data());
+ printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data());
+ printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data());
+ printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data());
+ printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data());
+ printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data());
+ printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data());
+ printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data());
+ printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data());
+ printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data());
+ printf("kde_wallpaperdir=\\"%s\\"\n",
+ KApplication::kde_wallpaperdir().data());
+ printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data());
+ printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data());
+ printf("kde_servicesdir=\\"/tmp/dummy\\"\n");
+ printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n");
+ printf("kde_moduledir=\\"/tmp/dummy\\"\n");
+ return 0;
+ }
+EOF
+
+ ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext'
+ if { (eval echo configure:6352: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo "$ac_t""yes" 1>&6
+ else
+ { echo "configure: error: your system is not able to compile a small KDE application!
+Check, if you installed the KDE header files correctly.
+For more details about this problem, look at the end of config.log." 1>&2; exit 1; }
+ fi
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+
+
+ KDE_TEST_RPATH=
+
+ if test -n "$USE_RPATH"; then
+
+ if test -n "$kde_libraries"; then
+ KDE_TEST_RPATH="-R $kde_libraries"
+ fi
+
+ if test -n "$qt_libraries"; then
+ KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries"
+ fi
+
+ if test -n "$x_libraries"; then
+ KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries"
+ fi
+
+ KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH"
+ fi
+
+echo $ac_n "checking for KDE libraries installed""... $ac_c" 1>&6
+echo "configure:6389: checking for KDE libraries installed" >&5
+ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5'
+
+if { (eval echo configure:6392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ echo "$ac_t""yes" 1>&6
+else
+ { echo "configure: error: your system fails at linking a small KDE application!
+Check, if your compiler is installed correctly and if you have used the
+same compiler to compile Qt and kdelibs as you did use now.
+For more details about this problem, look at the end of config.log." 1>&2; exit 1; }
+fi
+
+if eval `KDEDIR= ./conftest 2>&5`; then
+ kde_result=done
+else
+ kde_result=problems
+fi
+
+KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
+kde_have_all_paths=yes
+
+
+ kde_cv_all_paths="kde_have_all_paths=\"yes\" \
+ kde_htmldir=\"$kde_htmldir\" \
+ kde_appsdir=\"$kde_appsdir\" \
+ kde_icondir=\"$kde_icondir\" \
+ kde_sounddir=\"$kde_sounddir\" \
+ kde_datadir=\"$kde_datadir\" \
+ kde_locale=\"$kde_locale\" \
+ kde_cgidir=\"$kde_cgidir\" \
+ kde_confdir=\"$kde_confdir\" \
+ kde_mimedir=\"$kde_mimedir\" \
+ kde_toolbardir=\"$kde_toolbardir\" \
+ kde_wallpaperdir=\"$kde_wallpaperdir\" \
+ kde_templatesdir=\"$kde_templatesdir\" \
+ kde_bindir=\"$kde_bindir\" \
+ kde_servicesdir=\"$kde_servicesdir\" \
+ kde_servicetypesdir=\"$kde_servicetypesdir\" \
+ kde_moduledir=\"$kde_moduledir\" \
+ kde_result=$kde_result"
+
+
+
+ else
+ { echo "configure: error: path checking not yet supported for KDE 2" 1>&2; exit 1; }
+ fi
+
+fi
+
+ eval "$kde_cv_all_paths"
+ if test -z "$kde_htmldir" || test -z "$kde_appsdir" ||
+ test -z "$kde_icondir" || test -z "$kde_sounddir" ||
+ test -z "$kde_datadir" || test -z "$kde_locale" ||
+ test -z "$kde_cgidir" || test -z "$kde_confdir" ||
+ test -z "$kde_mimedir" || test -z "$kde_toolbardir" ||
+ test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" ||
+ test -z "$kde_bindir" || test -z "$kde_servicesdir" ||
+ test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" ||
+ test "$kde_have_all_paths" != "yes"; then
+ kde_have_all_paths=no
+ fi
+
+ kde_result="$kde_result (cache overridden)"
+fi
+if test "$kde_have_all_paths" = "no"; then
+ { echo "configure: error: configure could not run a little KDE program to test the environment.
+Since it had compiled and linked before, it must be a strange problem on your system.
+Look at config.log for details. If you are not able to fix this, look at
+http://www.kde.org/faq/installation.html or any www.kde.org mirror.
+(If you're using an egcs version on Linux, you may update binutils!)
+" 1>&2; exit 1; }
+else
+ rm -f conftest*
+ echo "$ac_t""$kde_result" 1>&6
+fi
+
+bindir=$kde_bindir
+
+
+ kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde2/bin /usr/kde/bin /usr/local/kde/bin"
+ if test -n "$KDEDIRS"; then
+ kde_save_IFS=$IFS
+ IFS=:
+ for dir in $KDEDIRS; do
+ kde_default_bindirs="$dir/bin $kde_default_bindirs "
+ done
+ IFS=$kde_save_IFS
+ fi
+ kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs"
+
+ echo $ac_n "checking for dcopidl""... $ac_c" 1>&6
+echo "configure:6480: checking for dcopidl" >&5
+ if test -n "$DCOPIDL"; then
+ kde_cv_path="$DCOPIDL";
+ else
+ kde_cache=`echo dcopidl | sed 'y%./+-%__p_%'`
+
+ if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ kde_cv_path="NONE"
+ dirs="$kde_default_bindirs"
+ kde_save_IFS=$IFS
+ IFS=':'
+ for dir in $PATH; do
+ dirs="$dirs $dir"
+ done
+ IFS=$kde_save_IFS
+
+ for dir in $dirs; do
+ if test -x "$dir/dcopidl"; then
+ if test -n ""
+ then
+ evalstr="$dir/dcopidl 2>&1 "
+ if eval $evalstr; then
+ kde_cv_path="$dir/dcopidl"
+ break
+ fi
+ else
+ kde_cv_path="$dir/dcopidl"
+ break
+ fi
+ fi
+ done
+
+ eval "kde_cv_path_$kde_cache=$kde_cv_path"
+
+
+fi
+
+
+ eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
+
+ fi
+
+ if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
+ echo "$ac_t""not found" 1>&6
+
+ { echo "configure: error: The important program dcopidl was not found!
+Please check whether you installed KDE correctly.
+" 1>&2; exit 1; }
+
+ else
+ echo "$ac_t""$kde_cv_path" 1>&6
+ DCOPIDL=$kde_cv_path
+
+ fi
+
+
+ echo $ac_n "checking for dcopidl2cpp""... $ac_c" 1>&6
+echo "configure:6540: checking for dcopidl2cpp" >&5
+ if test -n "$DCOPIDL2CPP"; then
+ kde_cv_path="$DCOPIDL2CPP";
+ else
+ kde_cache=`echo dcopidl2cpp | sed 'y%./+-%__p_%'`
+
+ if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ kde_cv_path="NONE"
+ dirs="$kde_default_bindirs"
+ kde_save_IFS=$IFS
+ IFS=':'
+ for dir in $PATH; do
+ dirs="$dirs $dir"
+ done
+ IFS=$kde_save_IFS
+
+ for dir in $dirs; do
+ if test -x "$dir/dcopidl2cpp"; then
+ if test -n ""
+ then
+ evalstr="$dir/dcopidl2cpp 2>&1 "
+ if eval $evalstr; then
+ kde_cv_path="$dir/dcopidl2cpp"
+ break
+ fi
+ else
+ kde_cv_path="$dir/dcopidl2cpp"
+ break
+ fi
+ fi
+ done
+
+ eval "kde_cv_path_$kde_cache=$kde_cv_path"
+
+
+fi
+
+
+ eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
+
+ fi
+
+ if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
+ echo "$ac_t""not found" 1>&6
+
+ { echo "configure: error: The important program dcopidl2cpp was not found!
+Please check whether you installed KDE correctly.
+" 1>&2; exit 1; }
+
+ else
+ echo "$ac_t""$kde_cv_path" 1>&6
+ DCOPIDL2CPP=$kde_cv_path
+
+ fi
+
+
+ echo $ac_n "checking for mcopidl""... $ac_c" 1>&6
+echo "configure:6600: checking for mcopidl" >&5
+ if test -n "$MCOPIDL"; then
+ kde_cv_path="$MCOPIDL";
+ else
+ kde_cache=`echo mcopidl | sed 'y%./+-%__p_%'`
+
+ if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ kde_cv_path="NONE"
+ dirs="$kde_default_bindirs"
+ kde_save_IFS=$IFS
+ IFS=':'
+ for dir in $PATH; do
+ dirs="$dirs $dir"
+ done
+ IFS=$kde_save_IFS
+
+ for dir in $dirs; do
+ if test -x "$dir/mcopidl"; then
+ if test -n ""
+ then
+ evalstr="$dir/mcopidl 2>&1 "
+ if eval $evalstr; then
+ kde_cv_path="$dir/mcopidl"
+ break
+ fi
+ else
+ kde_cv_path="$dir/mcopidl"
+ break
+ fi
+ fi
+ done
+
+ eval "kde_cv_path_$kde_cache=$kde_cv_path"
+
+
+fi
+
+
+ eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
+
+ fi
+
+ if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
+ echo "$ac_t""not found" 1>&6
+
+ { echo "configure: error: The important program mcopidl was not found!
+Please check whether you installed KDE correctly.
+" 1>&2; exit 1; }
+
+ else
+ echo "$ac_t""$kde_cv_path" 1>&6
+ MCOPIDL=$kde_cv_path
+
+ fi
+
+
+ echo $ac_n "checking for kdb2html""... $ac_c" 1>&6
+echo "configure:6660: checking for kdb2html" >&5
+ if test -n "$KDB2HTML"; then
+ kde_cv_path="$KDB2HTML";
+ else
+ kde_cache=`echo kdb2html | sed 'y%./+-%__p_%'`
+
+ if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ kde_cv_path="NONE"
+ dirs="$kde_default_bindirs"
+ kde_save_IFS=$IFS
+ IFS=':'
+ for dir in $PATH; do
+ dirs="$dirs $dir"
+ done
+ IFS=$kde_save_IFS
+
+ for dir in $dirs; do
+ if test -x "$dir/kdb2html"; then
+ if test -n ""
+ then
+ evalstr="$dir/kdb2html 2>&1 "
+ if eval $evalstr; then
+ kde_cv_path="$dir/kdb2html"
+ break
+ fi
+ else
+ kde_cv_path="$dir/kdb2html"
+ break
+ fi
+ fi
+ done
+
+ eval "kde_cv_path_$kde_cache=$kde_cv_path"
+
+
+fi
+
+
+ eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
+
+ fi
+
+ if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
+ echo "$ac_t""not found" 1>&6
+
+ { echo "configure: error: The important program kdb2html was not found!
+Please check whether you installed KDE correctly.
+" 1>&2; exit 1; }
+
+ else
+ echo "$ac_t""$kde_cv_path" 1>&6
+ KDB2HTML=$kde_cv_path
+
+ fi
+
+
+ echo $ac_n "checking for artsc-config""... $ac_c" 1>&6
+echo "configure:6720: checking for artsc-config" >&5
+ if test -n "$ARTSCCONFIG"; then
+ kde_cv_path="$ARTSCCONFIG";
+ else
+ kde_cache=`echo artsc-config | sed 'y%./+-%__p_%'`
+
+ if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ kde_cv_path="NONE"
+ dirs="$kde_default_bindirs"
+ kde_save_IFS=$IFS
+ IFS=':'
+ for dir in $PATH; do
+ dirs="$dirs $dir"
+ done
+ IFS=$kde_save_IFS
+
+ for dir in $dirs; do
+ if test -x "$dir/artsc-config"; then
+ if test -n ""
+ then
+ evalstr="$dir/artsc-config 2>&1 "
+ if eval $evalstr; then
+ kde_cv_path="$dir/artsc-config"
+ break
+ fi
+ else
+ kde_cv_path="$dir/artsc-config"
+ break
+ fi
+ fi
+ done
+
+ eval "kde_cv_path_$kde_cache=$kde_cv_path"
+
+
+fi
+
+
+ eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
+
+ fi
+
+ if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
+ echo "$ac_t""not found" 1>&6
+
+ { echo "configure: error: The important program artsc-config was not found!
+Please check whether you installed KDE correctly.
+" 1>&2; exit 1; }
+
+ else
+ echo "$ac_t""$kde_cv_path" 1>&6
+ ARTSCCONFIG=$kde_cv_path
+
+ fi
+
+
+ echo $ac_n "checking for kde-config""... $ac_c" 1>&6
+echo "configure:6780: checking for kde-config" >&5
+ if test -n "$KDECONFIG"; then
+ kde_cv_path="$KDECONFIG";
+ else
+ kde_cache=`echo kde-config | sed 'y%./+-%__p_%'`
+
+ if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ kde_cv_path="NONE"
+ dirs="$kde_default_bindirs"
+ kde_save_IFS=$IFS
+ IFS=':'
+ for dir in $PATH; do
+ dirs="$dirs $dir"
+ done
+ IFS=$kde_save_IFS
+
+ for dir in $dirs; do
+ if test -x "$dir/kde-config"; then
+ if test -n ""
+ then
+ evalstr="$dir/kde-config 2>&1 "
+ if eval $evalstr; then
+ kde_cv_path="$dir/kde-config"
+ break
+ fi
+ else
+ kde_cv_path="$dir/kde-config"
+ break
+ fi
+ fi
+ done
+
+ eval "kde_cv_path_$kde_cache=$kde_cv_path"
+
+
+fi
+
+
+ eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
+
+ fi
+
+ if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
+ echo "$ac_t""not found" 1>&6
+
+ { echo "configure: error: The important program kde-config was not found!
+Please check whether you installed KDE correctly.
+" 1>&2; exit 1; }
+
+ else
+ echo "$ac_t""$kde_cv_path" 1>&6
+ KDECONFIG=$kde_cv_path
+
+ fi
+
+
+ DCOP_DEPENDENCIES='$(DCOPIDL)'
+
+
+
+
+
+
+
+
+ if test -x "$KDECONFIG"; then # it can be "compiled"
+ kde_libs_prefix=`$KDECONFIG --prefix`
+ if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then
+ { echo "configure: error: $KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs.
+ This means it has been moved since you installed it.
+ This won't work. Please recompile kdelibs for the new prefix.
+ " 1>&2; exit 1; }
+ fi
+ kde_libs_htmldir=`$KDECONFIG --install html --expandvars`
+ else
+ kde_libs_prefix='$(prefix)'
+ kde_libs_htmldir='$(kde_htmldir)'
+ fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test "$kde_qtver" = 1; then
+ kde_minidir="$kde_icondir/mini"
+else
+# for KDE 1 - this breaks KDE2 apps using minidir, but
+# that's the plan ;-/
+ kde_minidir="/dev/null"
+fi
+
+
+
+
+
+
+if test $kde_qtver = 2; then
+ LIB_KDECORE='-lkdecore'
+
+ LIB_KDEUI='-lkdeui'
+
+ LIB_KFORMULA='-lkformula'
+
+ LIB_KIO='-lkio'
+
+ LIB_KSYCOCA='-lksycoca'
+
+ LIB_SMB='-lsmb'
+
+ LIB_KFILE='-lkfile'
+
+ LIB_KAB='-lkab'
+
+ LIB_KHTML='-lkhtml'
+
+ LIB_KSPELL='-lkspell'
+
+ LIB_KPARTS='-lkparts'
+
+ LIB_KWRITE='-lkwrite'
+
+else
+ LIB_KDECORE='-lkdecore -lXext $(LIB_QT)'
+
+ LIB_KDEUI='-lkdeui $(LIB_KDECORE)'
+
+ LIB_KFM='-lkfm $(LIB_KDECORE)'
+
+ LIB_KFILE='-lkfile $(LIB_KFM) $(LIB_KDEUI)'
+
+ LIB_KAB='-lkab $(LIB_KIMGIO) $(LIB_KDECORE)'
+
+fi
+
+
+
+if test "$program_transform_name" = s,x,x,; then
+ program_transform_name=
+else
+ # Double any \ or $. echo might interpret backslashes.
+ cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+ program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+ rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+
+#MIN_CONFIG
+
+
+
+
+DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin"
+
+if test ! -s $srcdir/subdirs; then
+ TOPSUBDIRS=""
+ files=`cd $srcdir && ls -1`
+ dirs=`for i in $files; do if test -d $i; then echo $i; fi; done`
+ for i in $dirs; do
+ echo $i >> $srcdir/subdirs
+ done
+fi
+
+if test -s $srcdir/inst-apps; then
+ ac_topsubdirs="`cat $srcdir/inst-apps`"
+else
+ ac_topsubdirs="`cat $srcdir/subdirs`"
+fi
+
+for i in $ac_topsubdirs; do
+ echo $ac_n "checking if $i should be compiled""... $ac_c" 1>&6
+echo "configure:6979: checking if $i should be compiled" >&5
+ if test -d $srcdir/$i; then
+ install_it="yes"
+ for j in $DO_NOT_COMPILE; do
+ if test $i = $j; then
+ install_it="no"
+ fi
+ done
+ else
+ install_it="no"
+ fi
+ echo "$ac_t""$install_it" 1>&6
+ if test $install_it = "yes"; then
+ TOPSUBDIRS="$TOPSUBDIRS $i"
+ fi
+done
+
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+DEFS=-DHAVE_CONFIG_H
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+ case "\$ac_option" in
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+ exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+ -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
+ exit 0 ;;
+ -help | --help | --hel | --he | --h)
+ echo "\$ac_cs_usage"; exit 0 ;;
+ *) echo "\$ac_cs_usage"; exit 1 ;;
+ esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "\
+./Makefile \
+doc/Makefile \
+doc/en/Makefile \
+kfocus/Makefile \
+po/Makefile \
+ config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@PACKAGE@%$PACKAGE%g
+s%@VERSION@%$VERSION%g
+s%@ACLOCAL@%$ACLOCAL%g
+s%@AUTOCONF@%$AUTOCONF%g
+s%@AUTOMAKE@%$AUTOMAKE%g
+s%@AUTOHEADER@%$AUTOHEADER%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@SET_MAKE@%$SET_MAKE%g
+s%@CONF_FILES@%$CONF_FILES%g
+s%@CC@%$CC%g
+s%@CPP@%$CPP%g
+s%@CXX@%$CXX%g
+s%@USE_EXCEPTIONS@%$USE_EXCEPTIONS%g
+s%@USE_RTTI@%$USE_RTTI%g
+s%@CXXCPP@%$CXXCPP%g
+s%@NOOPT_CXXFLAGS@%$NOOPT_CXXFLAGS%g
+s%@REPO@%$REPO%g
+s%@NOREPO@%$NOREPO%g
+s%@KDE_USE_FINAL_TRUE@%$KDE_USE_FINAL_TRUE%g
+s%@KDE_USE_FINAL_FALSE@%$KDE_USE_FINAL_FALSE%g
+s%@KDE_USE_CLOSURE_TRUE@%$KDE_USE_CLOSURE_TRUE%g
+s%@KDE_USE_CLOSURE_FALSE@%$KDE_USE_CLOSURE_FALSE%g
+s%@KDE_CXXFLAGS@%$KDE_CXXFLAGS%g
+s%@OBJEXT@%$OBJEXT%g
+s%@EXEEXT@%$EXEEXT%g
+s%@LN_S@%$LN_S%g
+s%@RANLIB@%$RANLIB%g
+s%@STRIP@%$STRIP%g
+s%@LIBTOOL@%$LIBTOOL%g
+s%@KDE_PLUGIN@%$KDE_PLUGIN%g
+s%@MSGFMT@%$MSGFMT%g
+s%@GMSGFMT@%$GMSGFMT%g
+s%@XGETTEXT@%$XGETTEXT%g
+s%@LIBCOMPAT@%$LIBCOMPAT%g
+s%@LIBCRYPT@%$LIBCRYPT%g
+s%@LIBSOCKET@%$LIBSOCKET%g
+s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g
+s%@LIBUCB@%$LIBUCB%g
+s%@LIBDL@%$LIBDL%g
+s%@X_INCLUDES@%$X_INCLUDES%g
+s%@X_LDFLAGS@%$X_LDFLAGS%g
+s%@x_libraries@%$x_libraries%g
+s%@x_includes@%$x_includes%g
+s%@LIBSM@%$LIBSM%g
+s%@X_PRE_LIBS@%$X_PRE_LIBS%g
+s%@LIB_X11@%$LIB_X11%g
+s%@USER_INCLUDES@%$USER_INCLUDES%g
+s%@USER_LDFLAGS@%$USER_LDFLAGS%g
+s%@LIBZ@%$LIBZ%g
+s%@LIBPNG@%$LIBPNG%g
+s%@LIBJPEG@%$LIBJPEG%g
+s%@qt_libraries@%$qt_libraries%g
+s%@qt_includes@%$qt_includes%g
+s%@QT_INCLUDES@%$QT_INCLUDES%g
+s%@QT_LDFLAGS@%$QT_LDFLAGS%g
+s%@MOC@%$MOC%g
+s%@UIC@%$UIC%g
+s%@LIB_QT@%$LIB_QT%g
+s%@KDE_EXTRA_RPATH@%$KDE_EXTRA_RPATH%g
+s%@KDE_RPATH@%$KDE_RPATH%g
+s%@kde_libraries@%$kde_libraries%g
+s%@kde_includes@%$kde_includes%g
+s%@KDE_LDFLAGS@%$KDE_LDFLAGS%g
+s%@KDE_INCLUDES@%$KDE_INCLUDES%g
+s%@all_includes@%$all_includes%g
+s%@all_libraries@%$all_libraries%g
+s%@AUTODIRS@%$AUTODIRS%g
+s%@DCOPIDL@%$DCOPIDL%g
+s%@DCOPIDL2CPP@%$DCOPIDL2CPP%g
+s%@DCOP_DEPENDENCIES@%$DCOP_DEPENDENCIES%g
+s%@MCOPIDL@%$MCOPIDL%g
+s%@KDB2HTML@%$KDB2HTML%g
+s%@ARTSCCONFIG@%$ARTSCCONFIG%g
+s%@KDECONFIG@%$KDECONFIG%g
+s%@kde_libs_prefix@%$kde_libs_prefix%g
+s%@kde_libs_htmldir@%$kde_libs_htmldir%g
+s%@kde_htmldir@%$kde_htmldir%g
+s%@kde_appsdir@%$kde_appsdir%g
+s%@kde_icondir@%$kde_icondir%g
+s%@kde_sounddir@%$kde_sounddir%g
+s%@kde_datadir@%$kde_datadir%g
+s%@kde_locale@%$kde_locale%g
+s%@kde_confdir@%$kde_confdir%g
+s%@kde_mimedir@%$kde_mimedir%g
+s%@kde_wallpaperdir@%$kde_wallpaperdir%g
+s%@kde_bindir@%$kde_bindir%g
+s%@kde_templatesdir@%$kde_templatesdir%g
+s%@kde_servicesdir@%$kde_servicesdir%g
+s%@kde_servicetypesdir@%$kde_servicetypesdir%g
+s%@kde_moduledir@%$kde_moduledir%g
+s%@LIB_KDECORE@%$LIB_KDECORE%g
+s%@LIB_KDEUI@%$LIB_KDEUI%g
+s%@LIB_KFORMULA@%$LIB_KFORMULA%g
+s%@LIB_KIO@%$LIB_KIO%g
+s%@LIB_KSYCOCA@%$LIB_KSYCOCA%g
+s%@LIB_SMB@%$LIB_SMB%g
+s%@LIB_KFILE@%$LIB_KFILE%g
+s%@LIB_KAB@%$LIB_KAB%g
+s%@LIB_KHTML@%$LIB_KHTML%g
+s%@LIB_KSPELL@%$LIB_KSPELL%g
+s%@LIB_KPARTS@%$LIB_KPARTS%g
+s%@LIB_KWRITE@%$LIB_KWRITE%g
+s%@LIB_KFM@%$LIB_KFM%g
+s%@TOPSUBDIRS@%$TOPSUBDIRS%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+ else
+ sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+ fi
+ if test ! -s conftest.s$ac_file; then
+ ac_more_lines=false
+ rm -f conftest.s$ac_file
+ else
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f conftest.s$ac_file"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+ fi
+ ac_file=`expr $ac_file + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_cmds`
+ fi
+done
+if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"\
+./Makefile \
+doc/Makefile \
+doc/en/Makefile \
+kfocus/Makefile \
+po/Makefile \
+"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case "$ac_file" in
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ *) ac_file_in="${ac_file}.in" ;;
+ esac
+
+ # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+ # The file is in a subdirectory.
+ test ! -d "$ac_dir" && mkdir "$ac_dir"
+ ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+ else
+ ac_dir_suffix= ac_dots=
+ fi
+
+ case "$ac_given_srcdir" in
+ .) srcdir=.
+ if test -z "$ac_dots"; then top_srcdir=.
+ else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+ /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+ *) # Relative path.
+ srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+ top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+
+ case "$ac_given_INSTALL" in
+ [/$]*) INSTALL="$ac_given_INSTALL" ;;
+"") ;;
+ *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+ esac
+
+ echo creating "$ac_file"
+ rm -f "$ac_file"
+ configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+ case "$ac_file" in
+ *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+ *) ac_comsub= ;;
+ esac
+
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+ sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
+ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
+ac_dC='\3'
+ac_dD='%g'
+# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
+ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+ac_uB='\([ ]\)%\1#\2define\3'
+ac_uC=' '
+ac_uD='\4%g'
+# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+ac_eB='$%\1#\2define\3'
+ac_eC=' '
+ac_eD='%g'
+
+if test "${CONFIG_HEADERS+set}" != set; then
+EOF
+cat >> $CONFIG_STATUS <<EOF
+ CONFIG_HEADERS="config.h"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
+for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case "$ac_file" in
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ *) ac_file_in="${ac_file}.in" ;;
+ esac
+
+ echo creating $ac_file
+
+ rm -f conftest.frag conftest.in conftest.out
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+ cat $ac_file_inputs > conftest.in
+
+EOF
+
+# Transform confdefs.h into a sed script conftest.vals that substitutes
+# the proper values into config.h.in to produce config.h. And first:
+# Protect against being on the right side of a sed subst in config.status.
+# Protect against being in an unquoted here document in config.status.
+rm -f conftest.vals
+cat > conftest.hdr <<\EOF
+s/[\\&%]/\\&/g
+s%[\\$`]%\\&%g
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+s%ac_d%ac_u%gp
+s%ac_u%ac_e%gp
+EOF
+sed -n -f conftest.hdr confdefs.h > conftest.vals
+rm -f conftest.hdr
+
+# This sed command replaces #undef with comments. This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >> conftest.vals <<\EOF
+s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
+EOF
+
+# Break up conftest.vals because some shells have a limit on
+# the size of here documents, and old seds have small limits too.
+
+rm -f conftest.tail
+while :
+do
+ ac_lines=`grep -c . conftest.vals`
+ # grep -c gives empty output for an empty file on some AIX systems.
+ if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
+ # Write a limited-size here document to conftest.frag.
+ echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
+ echo 'CEOF
+ sed -f conftest.frag conftest.in > conftest.out
+ rm -f conftest.in
+ mv conftest.out conftest.in
+' >> $CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
+ rm -f conftest.vals
+ mv conftest.tail conftest.vals
+done
+rm -f conftest.vals
+
+cat >> $CONFIG_STATUS <<\EOF
+ rm -f conftest.frag conftest.h
+ echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
+ cat conftest.in >> conftest.h
+ rm -f conftest.in
+ if cmp -s $ac_file conftest.h 2>/dev/null; then
+ echo "$ac_file is unchanged"
+ rm -f conftest.h
+ else
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+ # The file is in a subdirectory.
+ test ! -d "$ac_dir" && mkdir "$ac_dir"
+ fi
+ rm -f $ac_file
+ mv conftest.h $ac_file
+ fi
+fi; done
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
+
+exit 0
+EOF
+if test "x$with_fast_perl" = "xyes" ; then
+ perl -i.bak $ac_aux_dir/conf.change.pl $CONFIG_STATUS || mv $CONFIG_STATUS.bak $CONFIG_STATUS;
+ rm -f $CONFIG_STATUS.bak;
+fi
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
Property changes on: kde-extras/kfocus/branches/upstream/current/configure
___________________________________________________________________
Name: svn:executable
+
Added: kde-extras/kfocus/branches/upstream/current/configure.in
===================================================================
--- kde-extras/kfocus/branches/upstream/current/configure.in 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/configure.in 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,49 @@
+# Original Author was Kalle at kde.org
+# I lifted it in some mater. (Stephan Kulow)
+# I used much code from Janos Farkas
+
+dnl Process this file with autoconf to produce a configure script.
+
+AC_INIT(acinclude.m4) dnl a source file from your sub dir
+
+dnl This is so we can use kde-common
+AC_CONFIG_AUX_DIR(admin)
+
+AC_CANONICAL_SYSTEM
+AC_ARG_PROGRAM
+
+dnl Automake doc recommends to do this only here. (Janos)
+AM_INIT_AUTOMAKE(kfocus, 1.0.2) dnl searches for some needed programs
+
+KDE_SET_PREFIX
+
+dnl generate the config header
+AM_CONFIG_HEADER(config.h) dnl at the distribution this done
+
+dnl Checks for programs.
+AC_CHECK_COMPILERS
+AC_ENABLE_SHARED(yes)
+AC_ENABLE_STATIC(no)
+KDE_PROG_LIBTOOL
+
+dnl for NLS support. Call them in this order!
+dnl WITH_NLS is for the po files
+AM_KDE_WITH_NLS
+
+AC_PATH_KDE
+
+dnl Perform program name transformation
+AC_ARG_PROGRAM
+
+#MIN_CONFIG
+
+dnl PACKAGE set before
+
+KDE_CREATE_SUBDIRSLIST
+AC_OUTPUT( \
+./Makefile \
+doc/Makefile \
+doc/en/Makefile \
+kfocus/Makefile \
+po/Makefile \
+)
Added: kde-extras/kfocus/branches/upstream/current/doc/Makefile.in
===================================================================
--- kde-extras/kfocus/branches/upstream/current/doc/Makefile.in 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/doc/Makefile.in 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,454 @@
+# KDE tags expanded automatically by am_edit - $Revision: 1.1.1.1 $
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+####### kdevelop will overwrite this part!!! (begin)##########
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+#>-
+bindir = @bindir@
+#>+ 3
+DEPDIR = .deps
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+ARTSCCONFIG = @ARTSCCONFIG@
+AS = @AS@
+AUTODIRS = @AUTODIRS@
+CC = @CC@
+CONF_FILES = @CONF_FILES@
+CPP = @CPP@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DCOPIDL = @DCOPIDL@
+DCOPIDL2CPP = @DCOPIDL2CPP@
+DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
+DLLTOOL = @DLLTOOL@
+DPMSINC = @DPMSINC@
+DPMSLIB = @DPMSLIB@
+EXEEXT = @EXEEXT@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+GLINC = @GLINC@
+GLLIB = @GLLIB@
+GMSGFMT = @GMSGFMT@
+IDL = @IDL@
+IDL_DEPENDENCIES = @IDL_DEPENDENCIES@
+KDB2HTML = @KDB2HTML@
+KDECONFIG = @KDECONFIG@
+KDE_CXXFLAGS = @KDE_CXXFLAGS@
+KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
+KDE_INCLUDES = @KDE_INCLUDES@
+KDE_LDFLAGS = @KDE_LDFLAGS@
+KDE_PLUGIN = @KDE_PLUGIN@
+KDE_RPATH = @KDE_RPATH@
+KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
+KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
+KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
+KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
+LIBCOMPAT = @LIBCOMPAT@
+LIBCRYPT = @LIBCRYPT@
+LIBDL = @LIBDL@
+LIBJPEG = @LIBJPEG@
+LIBMICO = @LIBMICO@
+LIBOBJS = @LIBOBJS@
+LIBPNG = @LIBPNG@
+LIBPTHREAD = @LIBPTHREAD@
+LIBPYTHON = @LIBPYTHON@
+LIBQIMGIO = @LIBQIMGIO@
+LIBSM = @LIBSM@
+LIBSOCKET = @LIBSOCKET@
+LIBTIFF = @LIBTIFF@
+LIBTOOL = @LIBTOOL@
+LIBUCB = @LIBUCB@
+LIBZ = @LIBZ@
+LIB_KAB = @LIB_KAB@
+LIB_KDECORE = @LIB_KDECORE@
+LIB_KDEUI = @LIB_KDEUI@
+LIB_KFILE = @LIB_KFILE@
+LIB_KFM = @LIB_KFM@
+LIB_KFORMULA = @LIB_KFORMULA@
+LIB_KHTML = @LIB_KHTML@
+LIB_KIMGIO = @LIB_KIMGIO@
+LIB_KIO = @LIB_KIO@
+LIB_KPARTS = @LIB_KPARTS@
+LIB_KSPELL = @LIB_KSPELL@
+LIB_KSYCOCA = @LIB_KSYCOCA@
+LIB_KWRITE = @LIB_KWRITE@
+LIB_QT = @LIB_QT@
+LIB_SMB = @LIB_SMB@
+LIB_X11 = @LIB_X11@
+LN_S = @LN_S@
+MAKEINFO = @MAKEINFO@
+MCOPIDL = @MCOPIDL@
+MICO_INCLUDES = @MICO_INCLUDES@
+MICO_LDFLAGS = @MICO_LDFLAGS@
+MOC = @MOC@
+MSGFMT = @MSGFMT@
+NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
+NOREPO = @NOREPO@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PAMINC = @PAMINC@
+PAMLIBPATHS = @PAMLIBPATHS@
+PAMLIBS = @PAMLIBS@
+PYTHONINC = @PYTHONINC@
+PYTHONLIB = @PYTHONLIB@
+PYTHONMODDIR = @PYTHONMODDIR@
+QT_INCLUDES = @QT_INCLUDES@
+QT_LDFLAGS = @QT_LDFLAGS@
+RANLIB = @RANLIB@
+REPO = @REPO@
+STRIP = @STRIP@
+TOPSUBDIRS = @TOPSUBDIRS@
+UIC = @UIC@
+USER_INCLUDES = @USER_INCLUDES@
+USER_LDFLAGS = @USER_LDFLAGS@
+USE_EXCEPTIONS = @USE_EXCEPTIONS@
+USE_RTTI = @USE_RTTI@
+USE_THREADS = @USE_THREADS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XPMINC = @XPMINC@
+XPMLIB = @XPMLIB@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_INCLUDES = @X_INCLUDES@
+X_LDFLAGS = @X_LDFLAGS@
+X_PRE_LIBS = @X_PRE_LIBS@
+all_includes = @all_includes@
+all_libraries = @all_libraries@
+idldir = @idldir@
+kde_appsdir = @kde_appsdir@
+kde_bindir = @kde_bindir@
+kde_confdir = @kde_confdir@
+kde_datadir = @kde_datadir@
+kde_htmldir = @kde_htmldir@
+kde_icondir = @kde_icondir@
+kde_includes = @kde_includes@
+kde_libraries = @kde_libraries@
+kde_libs_htmldir = @kde_libs_htmldir@
+kde_libs_prefix = @kde_libs_prefix@
+kde_locale = @kde_locale@
+kde_mimedir = @kde_mimedir@
+kde_moduledir = @kde_moduledir@
+kde_servicesdir = @kde_servicesdir@
+kde_servicetypesdir = @kde_servicetypesdir@
+kde_sounddir = @kde_sounddir@
+kde_templatesdir = @kde_templatesdir@
+kde_wallpaperdir = @kde_wallpaperdir@
+micodir = @micodir@
+qt_includes = @qt_includes@
+qt_libraries = @qt_libraries@
+x_includes = @x_includes@
+x_libraries = @x_libraries@
+
+SUBDIRS = en
+mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES =
+DIST_COMMON = Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+#>- all: all-redirect
+#>+ 1
+all: docs-am all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+#>- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps doc/Makefile
+#>+ 2
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps doc/Makefile
+ cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+ at SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+ rev="$$subdir $$rev"; \
+ test "$$subdir" = "." && dot_seen=yes; \
+ done; \
+ test "$$dot_seen" = "no" && rev=". $$rev"; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ here=`pwd` && cd $(srcdir) \
+ && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+ -rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = doc
+
+distdir: $(DISTFILES)
+#>- @for file in $(DISTFILES); do \
+#>- d=$(srcdir); \
+#>- if test -d $$d/$$file; then \
+#>- cp -pr $$/$$file $(distdir)/$$file; \
+#>- else \
+#>- test -f $(distdir)/$$file \
+#>- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+#>- || cp -p $$d/$$file $(distdir)/$$file || :; \
+#>- fi; \
+#>- done
+#>+ 10
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+ for subdir in $(SUBDIRS); do \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ chmod 777 $(distdir)/$$subdir; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
+ || exit 1; \
+ fi; \
+ done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am:
+uninstall: uninstall-recursive
+all-am: Makefile
+all-redirect: all-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am: mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am: clean-tags clean-generic mostlyclean-am
+
+#>- clean: clean-recursive
+#>+ 1
+clean: kde-rpo-clean clean-recursive
+
+distclean-am: distclean-tags distclean-generic clean-am
+ -rm -f libtool
+
+distclean: distclean-recursive
+
+maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
+ distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+
+.PHONY: install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+####### kdevelop will overwrite this part!!! (end)############
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
+
+#>+ 2
+docs-am:
+
+#>+ 5
+force-reedit:
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps doc/Makefile
+ cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in
+
+
+#>+ 2
+final:
+ $(MAKE) all-am
+#>+ 2
+no-final:
+ $(MAKE) all-am
+#>+ 3
+cvs-clean:
+ $(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean
+
+#>+ 3
+kde-rpo-clean:
+ -rm -f *.rpo
Added: kde-extras/kfocus/branches/upstream/current/doc/en/Makefile.in
===================================================================
--- kde-extras/kfocus/branches/upstream/current/doc/en/Makefile.in 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/doc/en/Makefile.in 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,465 @@
+# KDE tags expanded automatically by am_edit - $Revision: 1.1.1.1 $
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+####### kdevelop will overwrite this part!!! (begin)##########
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+#>-
+bindir = @bindir@
+#>+ 3
+DEPDIR = .deps
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+ARTSCCONFIG = @ARTSCCONFIG@
+AS = @AS@
+AUTODIRS = @AUTODIRS@
+CC = @CC@
+CONF_FILES = @CONF_FILES@
+CPP = @CPP@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DCOPIDL = @DCOPIDL@
+DCOPIDL2CPP = @DCOPIDL2CPP@
+DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
+DLLTOOL = @DLLTOOL@
+DPMSINC = @DPMSINC@
+DPMSLIB = @DPMSLIB@
+EXEEXT = @EXEEXT@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+GLINC = @GLINC@
+GLLIB = @GLLIB@
+GMSGFMT = @GMSGFMT@
+IDL = @IDL@
+IDL_DEPENDENCIES = @IDL_DEPENDENCIES@
+KDB2HTML = @KDB2HTML@
+KDECONFIG = @KDECONFIG@
+KDE_CXXFLAGS = @KDE_CXXFLAGS@
+KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
+KDE_INCLUDES = @KDE_INCLUDES@
+KDE_LDFLAGS = @KDE_LDFLAGS@
+KDE_PLUGIN = @KDE_PLUGIN@
+KDE_RPATH = @KDE_RPATH@
+KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
+KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
+KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
+KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
+LIBCOMPAT = @LIBCOMPAT@
+LIBCRYPT = @LIBCRYPT@
+LIBDL = @LIBDL@
+LIBJPEG = @LIBJPEG@
+LIBMICO = @LIBMICO@
+LIBOBJS = @LIBOBJS@
+LIBPNG = @LIBPNG@
+LIBPTHREAD = @LIBPTHREAD@
+LIBPYTHON = @LIBPYTHON@
+LIBQIMGIO = @LIBQIMGIO@
+LIBSM = @LIBSM@
+LIBSOCKET = @LIBSOCKET@
+LIBTIFF = @LIBTIFF@
+LIBTOOL = @LIBTOOL@
+LIBUCB = @LIBUCB@
+LIBZ = @LIBZ@
+LIB_KAB = @LIB_KAB@
+LIB_KDECORE = @LIB_KDECORE@
+LIB_KDEUI = @LIB_KDEUI@
+LIB_KFILE = @LIB_KFILE@
+LIB_KFM = @LIB_KFM@
+LIB_KFORMULA = @LIB_KFORMULA@
+LIB_KHTML = @LIB_KHTML@
+LIB_KIMGIO = @LIB_KIMGIO@
+LIB_KIO = @LIB_KIO@
+LIB_KPARTS = @LIB_KPARTS@
+LIB_KSPELL = @LIB_KSPELL@
+LIB_KSYCOCA = @LIB_KSYCOCA@
+LIB_KWRITE = @LIB_KWRITE@
+LIB_QT = @LIB_QT@
+LIB_SMB = @LIB_SMB@
+LIB_X11 = @LIB_X11@
+LN_S = @LN_S@
+MAKEINFO = @MAKEINFO@
+MCOPIDL = @MCOPIDL@
+MICO_INCLUDES = @MICO_INCLUDES@
+MICO_LDFLAGS = @MICO_LDFLAGS@
+MOC = @MOC@
+MSGFMT = @MSGFMT@
+NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
+NOREPO = @NOREPO@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PAMINC = @PAMINC@
+PAMLIBPATHS = @PAMLIBPATHS@
+PAMLIBS = @PAMLIBS@
+PYTHONINC = @PYTHONINC@
+PYTHONLIB = @PYTHONLIB@
+PYTHONMODDIR = @PYTHONMODDIR@
+QT_INCLUDES = @QT_INCLUDES@
+QT_LDFLAGS = @QT_LDFLAGS@
+RANLIB = @RANLIB@
+REPO = @REPO@
+STRIP = @STRIP@
+TOPSUBDIRS = @TOPSUBDIRS@
+UIC = @UIC@
+USER_INCLUDES = @USER_INCLUDES@
+USER_LDFLAGS = @USER_LDFLAGS@
+USE_EXCEPTIONS = @USE_EXCEPTIONS@
+USE_RTTI = @USE_RTTI@
+USE_THREADS = @USE_THREADS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XPMINC = @XPMINC@
+XPMLIB = @XPMLIB@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_INCLUDES = @X_INCLUDES@
+X_LDFLAGS = @X_LDFLAGS@
+X_PRE_LIBS = @X_PRE_LIBS@
+all_includes = @all_includes@
+all_libraries = @all_libraries@
+idldir = @idldir@
+kde_appsdir = @kde_appsdir@
+kde_bindir = @kde_bindir@
+kde_confdir = @kde_confdir@
+kde_datadir = @kde_datadir@
+kde_htmldir = @kde_htmldir@
+kde_icondir = @kde_icondir@
+kde_includes = @kde_includes@
+kde_libraries = @kde_libraries@
+kde_libs_htmldir = @kde_libs_htmldir@
+kde_libs_prefix = @kde_libs_prefix@
+kde_locale = @kde_locale@
+kde_mimedir = @kde_mimedir@
+kde_moduledir = @kde_moduledir@
+kde_servicesdir = @kde_servicesdir@
+kde_servicetypesdir = @kde_servicetypesdir@
+kde_sounddir = @kde_sounddir@
+kde_templatesdir = @kde_templatesdir@
+kde_wallpaperdir = @kde_wallpaperdir@
+micodir = @micodir@
+qt_includes = @qt_includes@
+qt_libraries = @qt_libraries@
+x_includes = @x_includes@
+x_libraries = @x_libraries@
+
+EXTRA_DIST = index.docbook about.png completetask.png newproject.png tasklist.png loglist.png screenshot.png
+
+####### kdevelop will overwrite this part!!! (end)############
+
+KDE_LANG = en
+KDE_DOCS = kfocus
+mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
+CONFIG_HEADER = ../../config.h
+CONFIG_CLEAN_FILES =
+DIST_COMMON = Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+#>- all: all-redirect
+#>+ 1
+all: docs-am all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+#>- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps doc/en/Makefile
+#>+ 2
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps doc/en/Makefile
+ cd $(top_srcdir) && perl admin/am_edit doc/en/Makefile.in
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = doc/en
+
+#>- distdir: $(DISTFILES)
+#>+ 1
+distdir: distdir-nls $(DISTFILES)
+#>- @for file in $(DISTFILES); do \
+#>- d=$(srcdir); \
+#>- if test -d $$d/$$file; then \
+#>- cp -pr $$/$$file $(distdir)/$$file; \
+#>- else \
+#>- test -f $(distdir)/$$file \
+#>- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+#>- || cp -p $$d/$$file $(distdir)/$$file || :; \
+#>- fi; \
+#>- done
+#>+ 10
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+#>- install-data-am: install-data-local
+#>+ 1
+install-data-am: install-docs install-nls install-data-local
+install-data: install-data-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am: uninstall-local
+#>- uninstall: uninstall-am
+#>+ 1
+uninstall: uninstall-docs uninstall-nls uninstall-am
+all-am: Makefile
+all-redirect: all-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am: mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am: clean-generic mostlyclean-am
+
+#>- clean: clean-am
+#>+ 1
+clean: kde-rpo-clean clean-am
+
+distclean-am: distclean-generic clean-am
+ -rm -f libtool
+
+distclean: distclean-am
+
+maintainer-clean-am: maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-local install-data-am install-data install-am install \
+uninstall-local uninstall-am uninstall all-redirect all-am all \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+install-data-local:
+#>- $(mkinstalldirs) $(kde_htmldir)/en/kfocus/
+#>+ 1
+ $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/kfocus/
+#>- $(INSTALL_DATA) $(srcdir)/about.png $(kde_htmldir)/en/kfocus/about.png
+#>+ 1
+ $(INSTALL_DATA) $(srcdir)/about.png $(DESTDIR)$(kde_htmldir)/en/kfocus/about.png
+#>- $(mkinstalldirs) $(kde_htmldir)/en/kfocus/
+#>+ 1
+ $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/kfocus/
+#>- $(INSTALL_DATA) $(srcdir)/completetask.png $(kde_htmldir)/en/kfocus/completetask.png
+#>+ 1
+ $(INSTALL_DATA) $(srcdir)/completetask.png $(DESTDIR)$(kde_htmldir)/en/kfocus/completetask.png
+#>- $(mkinstalldirs) $(kde_htmldir)/en/kfocus/
+#>+ 1
+ $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/kfocus/
+#>- $(INSTALL_DATA) $(srcdir)/newproject.png $(kde_htmldir)/en/kfocus/newproject.png
+#>+ 1
+ $(INSTALL_DATA) $(srcdir)/newproject.png $(DESTDIR)$(kde_htmldir)/en/kfocus/newproject.png
+#>- $(mkinstalldirs) $(kde_htmldir)/en/kfocus/
+#>+ 1
+ $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/kfocus/
+#>- $(INSTALL_DATA) $(srcdir)/tasklist.png $(kde_htmldir)/en/kfocus/tasklist.png
+#>+ 1
+ $(INSTALL_DATA) $(srcdir)/tasklist.png $(DESTDIR)$(kde_htmldir)/en/kfocus/tasklist.png
+#>- $(mkinstalldirs) $(kde_htmldir)/en/kfocus/
+#>+ 1
+ $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/kfocus/
+#>- $(INSTALL_DATA) $(srcdir)/loglist.png $(kde_htmldir)/en/kfocus/loglist.png
+#>+ 1
+ $(INSTALL_DATA) $(srcdir)/loglist.png $(DESTDIR)$(kde_htmldir)/en/kfocus/loglist.png
+#>- $(mkinstalldirs) $(kde_htmldir)/en/kfocus/
+#>+ 1
+ $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/kfocus/
+#>- $(INSTALL_DATA) $(srcdir)/screenshot.png $(kde_htmldir)/en/kfocus/screenshot.png
+#>+ 1
+ $(INSTALL_DATA) $(srcdir)/screenshot.png $(DESTDIR)$(kde_htmldir)/en/kfocus/screenshot.png
+
+uninstall-local:
+#>- -rm -f $(kde_htmldir)/en/kfocus/about.png
+#>+ 1
+ -rm -f $(DESTDIR)$(kde_htmldir)/en/kfocus/about.png
+#>- -rm -f $(kde_htmldir)/en/kfocus/completetask.png
+#>+ 1
+ -rm -f $(DESTDIR)$(kde_htmldir)/en/kfocus/completetask.png
+#>- -rm -f $(kde_htmldir)/en/kfocus/newproject.png
+#>+ 1
+ -rm -f $(DESTDIR)$(kde_htmldir)/en/kfocus/newproject.png
+#>- -rm -f $(kde_htmldir)/en/kfocus/tasklist.png
+#>+ 1
+ -rm -f $(DESTDIR)$(kde_htmldir)/en/kfocus/tasklist.png
+#>- -rm -f $(kde_htmldir)/en/kfocus/loglist.png
+#>+ 1
+ -rm -f $(DESTDIR)$(kde_htmldir)/en/kfocus/loglist.png
+#>- -rm -f $(kde_htmldir)/en/kfocus/screenshot.png
+#>+ 1
+ -rm -f $(DESTDIR)$(kde_htmldir)/en/kfocus/screenshot.png
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
+
+#>+ 30
+docs-am: HTML HTML/index.html
+
+HTML:
+ test -d HTML || mkdir HTML
+
+HTML/index.html: HTML index.docbook
+ @test -d HTML && rm -r HTML
+ $(KDB2HTML) $(srcdir)/index.docbook
+
+install-docs:
+ $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kfocus
+ - at filelist="" ;\
+ if test -d HTML; then \
+ filelist=`(cd HTML && ls -1 * .anchors 2> /dev/null)`; \
+ dir=HTML; \
+ else if test -d $(srcdir)/HTML; then \
+ filelist=`(cd $(srcdir)/HTML && ls -1 * .anchors 2> /dev/null)`; \
+ dir="$(srcdir)/HTML" ;\
+ fi ; fi ;\
+ for file in $$filelist; do if test -f $$dir/$$file; then \
+ echo $(INSTALL_DATA) $$dir/$$file $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kfocus/$$file ;\
+ $(INSTALL_DATA) $$dir/$$file $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kfocus/$$file; \
+ fi; done
+ -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kfocus/common
+ $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kfocus/common
+
+uninstall-docs:
+ -rm -rf $(kde_htmldir)/$(KDE_LANG)/kfocus
+
+
+#>+ 13
+install-nls:
+ $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kfocus
+ @for base in screenshot.png index.docbook completetask.png about.png newproject.png tasklist.png loglist.png ; do \
+ echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kfocus/$$base ;\
+ $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kfocus/$$base ;\
+ done
+
+uninstall-nls:
+ for base in screenshot.png index.docbook completetask.png about.png newproject.png tasklist.png loglist.png ; do \
+ rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kfocus/$$base ;\
+ done
+
+
+#>+ 5
+distdir-nls:
+ for file in screenshot.png index.docbook completetask.png about.png newproject.png tasklist.png loglist.png ; do \
+ cp $(srcdir)/$$file $(distdir); \
+ done
+
+#>+ 5
+force-reedit:
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps doc/en/Makefile
+ cd $(top_srcdir) && perl admin/am_edit doc/en/Makefile.in
+
+
+#>+ 2
+final:
+ $(MAKE) all-am
+#>+ 2
+no-final:
+ $(MAKE) all-am
+#>+ 3
+cvs-clean:
+ $(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean
+
+#>+ 3
+kde-rpo-clean:
+ -rm -f *.rpo
Added: kde-extras/kfocus/branches/upstream/current/kfocus/Makefile.am
===================================================================
--- kde-extras/kfocus/branches/upstream/current/kfocus/Makefile.am 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/kfocus/Makefile.am 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,52 @@
+####### kdevelop will overwrite this part!!! (begin)##########
+bin_PROGRAMS = kfocus
+kfocus_SOURCES = kfvdate.cpp kfxenddate.cpp kfmenddate.cpp kfmprojectlist.cpp kfvprojectlist.cpp kfvlog.cpp kfvproject.cpp kfocuslogbook.cpp kfmproject.cpp kfocusdialogcompletetask.cpp kdatedialog.cpp kfocuslogentriesview.cpp kfocuslogentry.cpp kfocustasklist.cpp kfocustasksview.cpp kfocustaskpropsview.cpp kfocustask.cpp kfocusview.cpp kfocusdoc.cpp kfocus.cpp main.cpp
+kfocus_LDADD = -lkfile -lkdeui -lkdecore $(LIB_QT) $(LIBSOCKET)
+
+
+EXTRA_DIST = main.cpp kfocus.cpp kfocus.h kfocusdoc.cpp kfocusdoc.h kfocusview.cpp kfocusview.h kfocus.desktop lo32-app-kfocus.png lo16-app-kfocus.png kfocustask.cpp kfocustask.h kfocustaskpropsview.cpp kfocustaskpropsview.h kfocustasksview.cpp kfocustasksview.h kfocustasklist.cpp kfocustasklist.h kfocuslogentry.cpp kfocuslogentry.h kfocuslogentriesview.cpp kfocuslogentriesview.h kdatedialog.cpp kdatedialog.h kfocusdialogcompletetask.cpp kfocusdialogcompletetask.h kfmproject.cpp kfmproject.h kfocuslogbook.cpp kfocuslogbook.h kfvproject.h kfvproject.cpp kfvlog.cpp kfvlog.h kfvprojectlist.cpp kfvprojectlist.h kfmprojectlist.cpp kfmprojectlist.h kfocusui.rc kfmenddate.cpp kfmenddate.h kfxenddate.cpp kfxenddate.h kfvdate.cpp kfvdate.h
+
+install-data-local:
+ $(mkinstalldirs) $(kde_appsdir)/Applications/
+ $(INSTALL_DATA) $(srcdir)/kfocus.desktop $(kde_appsdir)/Applications/kfocus.desktop
+ $(mkinstalldirs) $(kde_icondir)/locolor/32x32/apps/
+ $(INSTALL_DATA) $(srcdir)/lo32-app-kfocus.png $(kde_icondir)/locolor/32x32/apps/kfocus.png
+ $(mkinstalldirs) $(kde_icondir)/locolor/16x16/apps/
+ $(INSTALL_DATA) $(srcdir)/lo16-app-kfocus.png $(kde_icondir)/locolor/16x16/apps/kfocus.png
+
+uninstall-local:
+ -rm -f $(kde_appsdir)/Applications/kfocus.desktop
+ -rm -f $(kde_icondir)/locolor/32x32/apps/kfocus.png
+ -rm -f $(kde_icondir)/locolor/16x16/apps/kfocus.png
+
+####### kdevelop will overwrite this part!!! (end)############
+# this 10 paths are KDE specific. Use them:
+# kde_htmldir Where your docs should go to. (contains lang subdirs)
+# kde_appsdir Where your application file (.kdelnk) should go to.
+# kde_icondir Where your icon should go to.
+# kde_minidir Where your mini icon should go to.
+# kde_datadir Where you install application data. (Use a subdir)
+# kde_locale Where translation files should go to.(contains lang subdirs)
+# kde_cgidir Where cgi-bin executables should go to.
+# kde_confdir Where config files should go to.
+# kde_mimedir Where mimetypes should go to.
+# kde_toolbardir Where general toolbar icons should go to.
+# kde_wallpaperdir Where general wallpapers should go to.
+
+# set the include path for X, qt and KDE
+INCLUDES= $(all_includes)
+
+METASOURCES = AUTO
+
+# the library search path.
+kfocus_LDFLAGS = $(all_libraries) $(KDE_RPATH)
+
+rcdir = $(kde_datadir)/kfocus
+rc_DATA = kfocusui.rc
+
+messages: rc.cpp
+ LIST=`find . -name \*.h -o -name \*.hh -o -name \*.H -o -name \*.hxx -o -name \*.hpp -o -name \*.cpp -o -name \*.cc -o -name \*.cxx -o -name \*.ecpp -o -name \*.C`; \
+ if test -n "$$LIST"; then \
+ $(XGETTEXT) $$LIST -o $(podir)/kfocus.pot; \
+ fi
+
Added: kde-extras/kfocus/branches/upstream/current/kfocus/Makefile.in
===================================================================
--- kde-extras/kfocus/branches/upstream/current/kfocus/Makefile.in 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/kfocus/Makefile.in 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,717 @@
+# KDE tags expanded automatically by am_edit - $Revision: 1.1.1.1 $
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+####### kdevelop will overwrite this part!!! (begin)##########
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+#>-
+bindir = @bindir@
+#>+ 3
+DEPDIR = .deps
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+ARTSCCONFIG = @ARTSCCONFIG@
+AS = @AS@
+AUTODIRS = @AUTODIRS@
+CC = @CC@
+CONF_FILES = @CONF_FILES@
+CPP = @CPP@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DCOPIDL = @DCOPIDL@
+DCOPIDL2CPP = @DCOPIDL2CPP@
+DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
+DLLTOOL = @DLLTOOL@
+DPMSINC = @DPMSINC@
+DPMSLIB = @DPMSLIB@
+EXEEXT = @EXEEXT@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+GLINC = @GLINC@
+GLLIB = @GLLIB@
+GMSGFMT = @GMSGFMT@
+IDL = @IDL@
+IDL_DEPENDENCIES = @IDL_DEPENDENCIES@
+KDB2HTML = @KDB2HTML@
+KDECONFIG = @KDECONFIG@
+KDE_CXXFLAGS = @KDE_CXXFLAGS@
+KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
+KDE_INCLUDES = @KDE_INCLUDES@
+KDE_LDFLAGS = @KDE_LDFLAGS@
+KDE_PLUGIN = @KDE_PLUGIN@
+KDE_RPATH = @KDE_RPATH@
+KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
+KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
+KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
+KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
+LIBCOMPAT = @LIBCOMPAT@
+LIBCRYPT = @LIBCRYPT@
+LIBDL = @LIBDL@
+LIBJPEG = @LIBJPEG@
+LIBMICO = @LIBMICO@
+LIBOBJS = @LIBOBJS@
+LIBPNG = @LIBPNG@
+LIBPTHREAD = @LIBPTHREAD@
+LIBPYTHON = @LIBPYTHON@
+LIBQIMGIO = @LIBQIMGIO@
+LIBSM = @LIBSM@
+LIBSOCKET = @LIBSOCKET@
+LIBTIFF = @LIBTIFF@
+LIBTOOL = @LIBTOOL@
+LIBUCB = @LIBUCB@
+LIBZ = @LIBZ@
+LIB_KAB = @LIB_KAB@
+LIB_KDECORE = @LIB_KDECORE@
+LIB_KDEUI = @LIB_KDEUI@
+LIB_KFILE = @LIB_KFILE@
+LIB_KFM = @LIB_KFM@
+LIB_KFORMULA = @LIB_KFORMULA@
+LIB_KHTML = @LIB_KHTML@
+LIB_KIMGIO = @LIB_KIMGIO@
+LIB_KIO = @LIB_KIO@
+LIB_KPARTS = @LIB_KPARTS@
+LIB_KSPELL = @LIB_KSPELL@
+LIB_KSYCOCA = @LIB_KSYCOCA@
+LIB_KWRITE = @LIB_KWRITE@
+LIB_QT = @LIB_QT@
+LIB_SMB = @LIB_SMB@
+LIB_X11 = @LIB_X11@
+LN_S = @LN_S@
+MAKEINFO = @MAKEINFO@
+MCOPIDL = @MCOPIDL@
+MICO_INCLUDES = @MICO_INCLUDES@
+MICO_LDFLAGS = @MICO_LDFLAGS@
+MOC = @MOC@
+MSGFMT = @MSGFMT@
+NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
+NOREPO = @NOREPO@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PAMINC = @PAMINC@
+PAMLIBPATHS = @PAMLIBPATHS@
+PAMLIBS = @PAMLIBS@
+PYTHONINC = @PYTHONINC@
+PYTHONLIB = @PYTHONLIB@
+PYTHONMODDIR = @PYTHONMODDIR@
+QT_INCLUDES = @QT_INCLUDES@
+QT_LDFLAGS = @QT_LDFLAGS@
+RANLIB = @RANLIB@
+REPO = @REPO@
+STRIP = @STRIP@
+TOPSUBDIRS = @TOPSUBDIRS@
+UIC = @UIC@
+USER_INCLUDES = @USER_INCLUDES@
+USER_LDFLAGS = @USER_LDFLAGS@
+USE_EXCEPTIONS = @USE_EXCEPTIONS@
+USE_RTTI = @USE_RTTI@
+USE_THREADS = @USE_THREADS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XPMINC = @XPMINC@
+XPMLIB = @XPMLIB@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_INCLUDES = @X_INCLUDES@
+X_LDFLAGS = @X_LDFLAGS@
+X_PRE_LIBS = @X_PRE_LIBS@
+all_includes = @all_includes@
+all_libraries = @all_libraries@
+idldir = @idldir@
+kde_appsdir = @kde_appsdir@
+kde_bindir = @kde_bindir@
+kde_confdir = @kde_confdir@
+kde_datadir = @kde_datadir@
+kde_htmldir = @kde_htmldir@
+kde_icondir = @kde_icondir@
+kde_includes = @kde_includes@
+kde_libraries = @kde_libraries@
+kde_libs_htmldir = @kde_libs_htmldir@
+kde_libs_prefix = @kde_libs_prefix@
+kde_locale = @kde_locale@
+kde_mimedir = @kde_mimedir@
+kde_moduledir = @kde_moduledir@
+kde_servicesdir = @kde_servicesdir@
+kde_servicetypesdir = @kde_servicetypesdir@
+kde_sounddir = @kde_sounddir@
+kde_templatesdir = @kde_templatesdir@
+kde_wallpaperdir = @kde_wallpaperdir@
+micodir = @micodir@
+qt_includes = @qt_includes@
+qt_libraries = @qt_libraries@
+x_includes = @x_includes@
+x_libraries = @x_libraries@
+
+bin_PROGRAMS = kfocus
+kfocus_SOURCES = kfvdate.cpp kfxenddate.cpp kfmenddate.cpp kfmprojectlist.cpp kfvprojectlist.cpp kfvlog.cpp kfvproject.cpp kfocuslogbook.cpp kfmproject.cpp kfocusdialogcompletetask.cpp kdatedialog.cpp kfocuslogentriesview.cpp kfocuslogentry.cpp kfocustasklist.cpp kfocustasksview.cpp kfocustaskpropsview.cpp kfocustask.cpp kfocusview.cpp kfocusdoc.cpp kfocus.cpp main.cpp
+kfocus_LDADD = -lkfile -lkdeui -lkdecore $(LIB_QT) $(LIBSOCKET)
+
+EXTRA_DIST = main.cpp kfocus.cpp kfocus.h kfocusdoc.cpp kfocusdoc.h kfocusview.cpp kfocusview.h kfocus.desktop lo32-app-kfocus.png lo16-app-kfocus.png kfocustask.cpp kfocustask.h kfocustaskpropsview.cpp kfocustaskpropsview.h kfocustasksview.cpp kfocustasksview.h kfocustasklist.cpp kfocustasklist.h kfocuslogentry.cpp kfocuslogentry.h kfocuslogentriesview.cpp kfocuslogentriesview.h kdatedialog.cpp kdatedialog.h kfocusdialogcompletetask.cpp kfocusdialogcompletetask.h kfmproject.cpp kfmproject.h kfocuslogbook.cpp kfocuslogbook.h kfvproject.h kfvproject.cpp kfvlog.cpp kfvlog.h kfvprojectlist.cpp kfvprojectlist.h kfmprojectlist.cpp kfmprojectlist.h kfocusui.rc kfmenddate.cpp kfmenddate.h kfxenddate.cpp kfxenddate.h kfvdate.cpp kfvdate.h
+
+####### kdevelop will overwrite this part!!! (end)############
+# this 10 paths are KDE specific. Use them:
+# kde_htmldir Where your docs should go to. (contains lang subdirs)
+# kde_appsdir Where your application file (.kdelnk) should go to.
+# kde_icondir Where your icon should go to.
+# kde_minidir Where your mini icon should go to.
+# kde_datadir Where you install application data. (Use a subdir)
+# kde_locale Where translation files should go to.(contains lang subdirs)
+# kde_cgidir Where cgi-bin executables should go to.
+# kde_confdir Where config files should go to.
+# kde_mimedir Where mimetypes should go to.
+# kde_toolbardir Where general toolbar icons should go to.
+# kde_wallpaperdir Where general wallpapers should go to.
+
+# set the include path for X, qt and KDE
+INCLUDES = $(all_includes)
+
+#>- METASOURCES = AUTO
+
+# the library search path.
+kfocus_LDFLAGS = $(all_libraries) $(KDE_RPATH)
+
+rcdir = $(kde_datadir)/kfocus
+rc_DATA = kfocusui.rc
+mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES =
+bin_PROGRAMS = kfocus$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir) -I..
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+#>- kfocus_OBJECTS = kfvdate.$(OBJEXT) kfxenddate.$(OBJEXT) \
+#>- kfmenddate.$(OBJEXT) kfmprojectlist.$(OBJEXT) kfvprojectlist.$(OBJEXT) \
+#>- kfvlog.$(OBJEXT) kfvproject.$(OBJEXT) kfocuslogbook.$(OBJEXT) \
+#>- kfmproject.$(OBJEXT) kfocusdialogcompletetask.$(OBJEXT) \
+#>- kdatedialog.$(OBJEXT) kfocuslogentriesview.$(OBJEXT) \
+#>- kfocuslogentry.$(OBJEXT) kfocustasklist.$(OBJEXT) \
+#>- kfocustasksview.$(OBJEXT) kfocustaskpropsview.$(OBJEXT) \
+#>- kfocustask.$(OBJEXT) kfocusview.$(OBJEXT) kfocusdoc.$(OBJEXT) \
+#>- kfocus.$(OBJEXT) main.$(OBJEXT)
+#>+ 14
+kfocus_final_OBJECTS = kfocus.all_cpp.o
+kfocus_nofinal_OBJECTS = kfvdate.$(OBJEXT) kfxenddate.$(OBJEXT) \
+kfmenddate.$(OBJEXT) kfmprojectlist.$(OBJEXT) kfvprojectlist.$(OBJEXT) \
+kfvlog.$(OBJEXT) kfvproject.$(OBJEXT) kfocuslogbook.$(OBJEXT) \
+kfmproject.$(OBJEXT) kfocusdialogcompletetask.$(OBJEXT) \
+kdatedialog.$(OBJEXT) kfocuslogentriesview.$(OBJEXT) \
+kfocuslogentry.$(OBJEXT) kfocustasklist.$(OBJEXT) \
+kfocustasksview.$(OBJEXT) kfocustaskpropsview.$(OBJEXT) \
+kfocustask.$(OBJEXT) kfocusview.$(OBJEXT) kfocusdoc.$(OBJEXT) \
+kfocus.$(OBJEXT) main.$(OBJEXT)\
+kdatedialog.moc.o kfocusview.moc.o kfmproject.moc.o kfocuslogentry.moc.o kfocuslogbook.moc.o kfmprojectlist.moc.o kfvproject.moc.o kfocustasksview.moc.o kfocusdoc.moc.o kfocustask.moc.o kfvlog.moc.o kfocus.moc.o kfocuslogentriesview.moc.o kfvdate.moc.o kfmenddate.moc.o kfvprojectlist.moc.o kfocusdialogcompletetask.moc.o kfocustaskpropsview.moc.o kfocustasklist.moc.o \
+kfocus_meta_unload.o
+ at KDE_USE_FINAL_FALSE@kfocus_OBJECTS = $(kfocus_nofinal_OBJECTS)
+ at KDE_USE_FINAL_TRUE@kfocus_OBJECTS = $(kfocus_final_OBJECTS)
+kfocus_DEPENDENCIES =
+CXXFLAGS = @CXXFLAGS@
+#>- CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+#>+ 1
+CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS)
+#>- LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+#>+ 1
+LTCXXCOMPILE = $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS)
+CXXLD = $(CXX)
+#>- CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@
+#>+ 1
+CXXLINK = $(LIBTOOL) --mode=link --tag=CXX $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) $(LDFLAGS) -o $@
+DATA = $(rc_DATA)
+
+DIST_COMMON = Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+SOURCES = $(kfocus_SOURCES)
+OBJECTS = $(kfocus_OBJECTS)
+
+#>- all: all-redirect
+#>+ 1
+all: docs-am all-redirect
+.SUFFIXES:
+.SUFFIXES: .S .c .cpp .lo .o .obj .s
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+#>- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps kfocus/Makefile
+#>+ 2
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps kfocus/Makefile
+ cd $(top_srcdir) && perl admin/am_edit kfocus/Makefile.in
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+mostlyclean-binPROGRAMS:
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+distclean-binPROGRAMS:
+
+maintainer-clean-binPROGRAMS:
+
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(bindir)
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+ if test -f $$p; then \
+ echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
+ $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+ else :; fi; \
+ done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ list='$(bin_PROGRAMS)'; for p in $$list; do \
+ rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+ done
+
+.c.o:
+ $(COMPILE) -c $<
+
+# FIXME: We should only use cygpath when building on Windows,
+# and only if it is available.
+.c.obj:
+ $(COMPILE) -c `cygpath -w $<`
+
+.s.o:
+ $(COMPILE) -c $<
+
+.S.o:
+ $(COMPILE) -c $<
+
+mostlyclean-compile:
+ -rm -f *.o core *.core
+ -rm -f *.$(OBJEXT)
+
+clean-compile:
+
+distclean-compile:
+ -rm -f *.tab.c
+
+maintainer-clean-compile:
+
+.c.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+.s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+.S.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+
+maintainer-clean-libtool:
+
+kfocus$(EXEEXT): $(kfocus_OBJECTS) $(kfocus_DEPENDENCIES)
+ @rm -f kfocus$(EXEEXT)
+ $(CXXLINK) $(kfocus_LDFLAGS) $(kfocus_OBJECTS) $(kfocus_LDADD) $(LIBS)
+.cpp.o:
+ $(CXXCOMPILE) -c $<
+.cpp.obj:
+ $(CXXCOMPILE) -c `cygpath -w $<`
+.cpp.lo:
+ $(LTCXXCOMPILE) -c $<
+
+install-rcDATA: $(rc_DATA)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(rcdir)
+ @list='$(rc_DATA)'; for p in $$list; do \
+ if test -f $(srcdir)/$$p; then \
+ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(rcdir)/$$p"; \
+ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(rcdir)/$$p; \
+ else if test -f $$p; then \
+ echo " $(INSTALL_DATA) $$p $(DESTDIR)$(rcdir)/$$p"; \
+ $(INSTALL_DATA) $$p $(DESTDIR)$(rcdir)/$$p; \
+ fi; fi; \
+ done
+
+uninstall-rcDATA:
+ @$(NORMAL_UNINSTALL)
+ list='$(rc_DATA)'; for p in $$list; do \
+ rm -f $(DESTDIR)$(rcdir)/$$p; \
+ done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ here=`pwd` && cd $(srcdir) \
+ && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+ -rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = kfocus
+
+distdir: $(DISTFILES)
+#>- @for file in $(DISTFILES); do \
+#>- d=$(srcdir); \
+#>- if test -d $$d/$$file; then \
+#>- cp -pr $$/$$file $(distdir)/$$file; \
+#>- else \
+#>- test -f $(distdir)/$$file \
+#>- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+#>- || cp -p $$d/$$file $(distdir)/$$file || :; \
+#>- fi; \
+#>- done
+#>+ 10
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am: install-binPROGRAMS
+install-exec: install-exec-am
+
+install-data-am: install-rcDATA install-data-local
+install-data: install-data-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am: uninstall-binPROGRAMS uninstall-rcDATA uninstall-local
+uninstall: uninstall-am
+all-am: Makefile $(PROGRAMS) $(DATA)
+all-redirect: all-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+ $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(rcdir)
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \
+ mostlyclean-libtool mostlyclean-tags \
+ mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+#>- clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \
+#>- clean-generic mostlyclean-am
+#>+ 2
+clean-am: clean-metasources clean-moc-classes clean-final clean-binPROGRAMS clean-compile clean-libtool clean-tags \
+ clean-generic mostlyclean-am
+
+#>- clean: clean-am
+#>+ 1
+clean: kde-rpo-clean clean-am
+
+distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \
+ distclean-tags distclean-generic clean-am
+ -rm -f libtool
+
+distclean: distclean-am
+
+maintainer-clean-am: maintainer-clean-binPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+ maintainer-clean-tags maintainer-clean-generic \
+ distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
+maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+clean-libtool maintainer-clean-libtool uninstall-rcDATA install-rcDATA \
+tags mostlyclean-tags distclean-tags clean-tags maintainer-clean-tags \
+distdir info-am info dvi-am dvi check check-am installcheck-am \
+installcheck install-exec-am install-exec install-data-local \
+install-data-am install-data install-am install uninstall-local \
+uninstall-am uninstall all-redirect all-am all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+install-data-local:
+#>- $(mkinstalldirs) $(kde_appsdir)/Applications/
+#>+ 1
+ $(mkinstalldirs) $(DESTDIR)$(kde_appsdir)/Applications/
+#>- $(INSTALL_DATA) $(srcdir)/kfocus.desktop $(kde_appsdir)/Applications/kfocus.desktop
+#>+ 1
+ $(INSTALL_DATA) $(srcdir)/kfocus.desktop $(DESTDIR)$(kde_appsdir)/Applications/kfocus.desktop
+#>- $(mkinstalldirs) $(kde_icondir)/locolor/32x32/apps/
+#>+ 1
+ $(mkinstalldirs) $(DESTDIR)$(kde_icondir)/locolor/32x32/apps/
+#>- $(INSTALL_DATA) $(srcdir)/lo32-app-kfocus.png $(kde_icondir)/locolor/32x32/apps/kfocus.png
+#>+ 1
+ $(INSTALL_DATA) $(srcdir)/lo32-app-kfocus.png $(DESTDIR)$(kde_icondir)/locolor/32x32/apps/kfocus.png
+#>- $(mkinstalldirs) $(kde_icondir)/locolor/16x16/apps/
+#>+ 1
+ $(mkinstalldirs) $(DESTDIR)$(kde_icondir)/locolor/16x16/apps/
+#>- $(INSTALL_DATA) $(srcdir)/lo16-app-kfocus.png $(kde_icondir)/locolor/16x16/apps/kfocus.png
+#>+ 1
+ $(INSTALL_DATA) $(srcdir)/lo16-app-kfocus.png $(DESTDIR)$(kde_icondir)/locolor/16x16/apps/kfocus.png
+
+uninstall-local:
+#>- -rm -f $(kde_appsdir)/Applications/kfocus.desktop
+#>+ 1
+ -rm -f $(DESTDIR)$(kde_appsdir)/Applications/kfocus.desktop
+#>- -rm -f $(kde_icondir)/locolor/32x32/apps/kfocus.png
+#>+ 1
+ -rm -f $(DESTDIR)$(kde_icondir)/locolor/32x32/apps/kfocus.png
+#>- -rm -f $(kde_icondir)/locolor/16x16/apps/kfocus.png
+#>+ 1
+ -rm -f $(DESTDIR)$(kde_icondir)/locolor/16x16/apps/kfocus.png
+
+messages: rc.cpp
+ LIST=`find . -name \*.h -o -name \*.hh -o -name \*.H -o -name \*.hxx -o -name \*.hpp -o -name \*.cpp -o -name \*.cc -o -name \*.cxx -o -name \*.ecpp -o -name \*.C`; \
+ if test -n "$$LIST"; then \
+ $(XGETTEXT) $$LIST -o $(podir)/kfocus.pot; \
+ fi
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
+
+#>+ 3
+kdatedialog.moc.cpp: $(srcdir)/kdatedialog.h
+ $(MOC) $(srcdir)/kdatedialog.h -o kdatedialog.moc.cpp
+
+#>+ 3
+kfocusview.moc.cpp: $(srcdir)/kfocusview.h
+ $(MOC) $(srcdir)/kfocusview.h -o kfocusview.moc.cpp
+
+#>+ 3
+kfmproject.moc.cpp: $(srcdir)/kfmproject.h
+ $(MOC) $(srcdir)/kfmproject.h -o kfmproject.moc.cpp
+
+#>+ 3
+kfocuslogentry.moc.cpp: $(srcdir)/kfocuslogentry.h
+ $(MOC) $(srcdir)/kfocuslogentry.h -o kfocuslogentry.moc.cpp
+
+#>+ 3
+kfocuslogbook.moc.cpp: $(srcdir)/kfocuslogbook.h
+ $(MOC) $(srcdir)/kfocuslogbook.h -o kfocuslogbook.moc.cpp
+
+#>+ 3
+kfmprojectlist.moc.cpp: $(srcdir)/kfmprojectlist.h
+ $(MOC) $(srcdir)/kfmprojectlist.h -o kfmprojectlist.moc.cpp
+
+#>+ 3
+kfvproject.moc.cpp: $(srcdir)/kfvproject.h
+ $(MOC) $(srcdir)/kfvproject.h -o kfvproject.moc.cpp
+
+#>+ 3
+kfocustasksview.moc.cpp: $(srcdir)/kfocustasksview.h
+ $(MOC) $(srcdir)/kfocustasksview.h -o kfocustasksview.moc.cpp
+
+#>+ 3
+kfocusdoc.moc.cpp: $(srcdir)/kfocusdoc.h
+ $(MOC) $(srcdir)/kfocusdoc.h -o kfocusdoc.moc.cpp
+
+#>+ 3
+kfocustask.moc.cpp: $(srcdir)/kfocustask.h
+ $(MOC) $(srcdir)/kfocustask.h -o kfocustask.moc.cpp
+
+#>+ 3
+kfvlog.moc.cpp: $(srcdir)/kfvlog.h
+ $(MOC) $(srcdir)/kfvlog.h -o kfvlog.moc.cpp
+
+#>+ 3
+kfocus.moc.cpp: $(srcdir)/kfocus.h
+ $(MOC) $(srcdir)/kfocus.h -o kfocus.moc.cpp
+
+#>+ 3
+kfocuslogentriesview.moc.cpp: $(srcdir)/kfocuslogentriesview.h
+ $(MOC) $(srcdir)/kfocuslogentriesview.h -o kfocuslogentriesview.moc.cpp
+
+#>+ 3
+kfvdate.moc.cpp: $(srcdir)/kfvdate.h
+ $(MOC) $(srcdir)/kfvdate.h -o kfvdate.moc.cpp
+
+#>+ 3
+kfmenddate.moc.cpp: $(srcdir)/kfmenddate.h
+ $(MOC) $(srcdir)/kfmenddate.h -o kfmenddate.moc.cpp
+
+#>+ 3
+kfvprojectlist.moc.cpp: $(srcdir)/kfvprojectlist.h
+ $(MOC) $(srcdir)/kfvprojectlist.h -o kfvprojectlist.moc.cpp
+
+#>+ 3
+kfocusdialogcompletetask.moc.cpp: $(srcdir)/kfocusdialogcompletetask.h
+ $(MOC) $(srcdir)/kfocusdialogcompletetask.h -o kfocusdialogcompletetask.moc.cpp
+
+#>+ 3
+kfocustaskpropsview.moc.cpp: $(srcdir)/kfocustaskpropsview.h
+ $(MOC) $(srcdir)/kfocustaskpropsview.h -o kfocustaskpropsview.moc.cpp
+
+#>+ 3
+kfocustasklist.moc.cpp: $(srcdir)/kfocustasklist.h
+ $(MOC) $(srcdir)/kfocustasklist.h -o kfocustasklist.moc.cpp
+
+#>+ 3
+clean-metasources:
+ -rm -f kdatedialog.moc.cpp kfocusview.moc.cpp kfmproject.moc.cpp kfocuslogentry.moc.cpp kfocuslogbook.moc.cpp kfmprojectlist.moc.cpp kfvproject.moc.cpp kfocustasksview.moc.cpp kfocusdoc.moc.cpp kfocustask.moc.cpp kfvlog.moc.cpp kfocus.moc.cpp kfocuslogentriesview.moc.cpp kfvdate.moc.cpp kfmenddate.moc.cpp kfvprojectlist.moc.cpp kfocusdialogcompletetask.moc.cpp kfocustaskpropsview.moc.cpp kfocustasklist.moc.cpp
+
+#>+ 2
+docs-am:
+
+#>+ 5
+force-reedit:
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps kfocus/Makefile
+ cd $(top_srcdir) && perl admin/am_edit kfocus/Makefile.in
+
+
+#>+ 10
+kfocus_meta_unload.cpp: kdatedialog.moc.cpp kfocusview.moc.cpp kfmproject.moc.cpp kfocuslogentry.moc.cpp kfocuslogbook.moc.cpp kfmprojectlist.moc.cpp kfvproject.moc.cpp kfocustasksview.moc.cpp kfocusdoc.moc.cpp kfocustask.moc.cpp kfvlog.moc.cpp kfocus.moc.cpp kfocuslogentriesview.moc.cpp kfvdate.moc.cpp kfmenddate.moc.cpp kfvprojectlist.moc.cpp kfocustaskpropsview.moc.cpp kfocusdialogcompletetask.moc.cpp kfocustasklist.moc.cpp
+ @echo 'creating kfocus_meta_unload.cpp'
+ -rm -f kfocus_meta_unload.cpp
+ @echo 'static const char * _metalist_kfocus[] = {' > kfocus_meta_unload.cpp
+ cat kdatedialog.moc.cpp kfocusview.moc.cpp kfmproject.moc.cpp kfocuslogentry.moc.cpp kfocuslogbook.moc.cpp kfmprojectlist.moc.cpp kfvproject.moc.cpp kfocustasksview.moc.cpp kfocusdoc.moc.cpp kfocustask.moc.cpp kfvlog.moc.cpp kfocus.moc.cpp kfocuslogentriesview.moc.cpp kfvdate.moc.cpp kfmenddate.moc.cpp kfvprojectlist.moc.cpp kfocustaskpropsview.moc.cpp kfocusdialogcompletetask.moc.cpp kfocustasklist.moc.cpp | grep 'char.*className' | sed -e 's/.*[^A-Za-z0-9_:]\([A-Za-z0-9_:]*\)::className.*$$/\"\1\",/' | sort | uniq >> kfocus_meta_unload.cpp
+ @echo '0};' >> kfocus_meta_unload.cpp
+ @echo '#include <kunload.h>' >> kfocus_meta_unload.cpp
+ @echo '_UNLOAD(kfocus)' >> kfocus_meta_unload.cpp
+
+
+#>+ 3
+clean-moc-classes:
+ -rm -f kfocus_meta_unload.cpp
+
+#>+ 11
+kfocus.all_cpp.cpp: $(srcdir)/Makefile.in $(srcdir)/kfvdate.cpp $(srcdir)/kfxenddate.cpp $(srcdir)/kfmenddate.cpp $(srcdir)/kfmprojectlist.cpp $(srcdir)/kfvprojectlist.cpp $(srcdir)/kfvlog.cpp $(srcdir)/kfvproject.cpp $(srcdir)/kfocuslogbook.cpp $(srcdir)/kfmproject.cpp $(srcdir)/kfocusdialogcompletetask.cpp $(srcdir)/kdatedialog.cpp $(srcdir)/kfocuslogentriesview.cpp $(srcdir)/kfocuslogentry.cpp $(srcdir)/kfocustasklist.cpp $(srcdir)/kfocustasksview.cpp $(srcdir)/kfocustaskpropsview.cpp $(srcdir)/kfocustask.cpp $(srcdir)/kfocusview.cpp $(srcdir)/kfocusdoc.cpp $(srcdir)/kfocus.cpp $(srcdir)/main.cpp kfocus_meta_unload.cpp kdatedialog.moc.cpp kfocusview.moc.cpp kfmproject.moc.cpp kfocuslogentry.moc.cpp kfocuslogbook.moc.cpp kfmprojectlist.moc.cpp kfvproject.moc.cpp kfocustasksview.moc.cpp kfocusdoc.moc.cpp kfocustask.moc.cpp kfvlog.moc.cpp kfocus.moc.cpp kfocuslogentriesview.moc.cpp kfvdate.moc.cpp kfmenddate.moc.cpp kfvprojectlist.moc.cpp kfocusdialogcompletetask.moc.cpp kfocustaskpropsview.moc.cpp kfocustasklist.moc.cpp
+ @echo 'creating kfocus.all_cpp.cpp ...'; \
+ rm -f kfocus.all_cpp.files kfocus.all_cpp.final; \
+ echo "#define KDE_USE_FINAL 1" >> kfocus.all_cpp.final; \
+ for file in kfvdate.cpp kfxenddate.cpp kfmenddate.cpp kfmprojectlist.cpp kfvprojectlist.cpp kfvlog.cpp kfvproject.cpp kfocuslogbook.cpp kfmproject.cpp kfocusdialogcompletetask.cpp kdatedialog.cpp kfocuslogentriesview.cpp kfocuslogentry.cpp kfocustasklist.cpp kfocustasksview.cpp kfocustaskpropsview.cpp kfocustask.cpp kfocusview.cpp kfocusdoc.cpp kfocus.cpp main.cpp kfocus_meta_unload.cpp kdatedialog.moc.cpp kfocusview.moc.cpp kfmproject.moc.cpp kfocuslogentry.moc.cpp kfocuslogbook.moc.cpp kfmprojectlist.moc.cpp kfvproject.moc.cpp kfocustasksview.moc.cpp kfocusdoc.moc.cpp kfocustask.moc.cpp kfvlog.moc.cpp kfocus.moc.cpp kfocuslogentriesview.moc.cpp kfvdate.moc.cpp kfmenddate.moc.cpp kfvprojectlist.moc.cpp kfocusdialogcompletetask.moc.cpp kfocustaskpropsview.moc.cpp kfocustasklist.moc.cpp; do \
+ echo "#include \"$$file\"" >> kfocus.all_cpp.files; \
+ test ! -f $(srcdir)/$$file || egrep '^#pragma +implementation' $(srcdir)/$$file >> kfocus.all_cpp.final; \
+ done; \
+ cat kfocus.all_cpp.final kfocus.all_cpp.files > kfocus.all_cpp.cpp; \
+ rm -f kfocus.all_cpp.final kfocus.all_cpp.files
+
+#>+ 3
+clean-final:
+ -rm -f kfocus.all_cpp.cpp
+
+#>+ 2
+final:
+ $(MAKE) kfocus_OBJECTS="$(kfocus_final_OBJECTS)" all-am
+#>+ 2
+no-final:
+ $(MAKE) kfocus_OBJECTS="$(kfocus_nofinal_OBJECTS)" all-am
+#>+ 3
+cvs-clean:
+ $(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean
+
+#>+ 3
+kde-rpo-clean:
+ -rm -f *.rpo
Added: kde-extras/kfocus/branches/upstream/current/kfocus/kfmproject.cpp
===================================================================
--- kde-extras/kfocus/branches/upstream/current/kfocus/kfmproject.cpp 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/kfocus/kfmproject.cpp 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,159 @@
+/***************************************************************************
+ kfmproject.cpp - description
+ -------------------
+ begin : Thu Aug 30 2001
+ copyright : (C) 2001 by Jeffrey Yu
+ email : wehjin at yahoo.com
+ ***************************************************************************/
+
+/***************************************************************************
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ ***************************************************************************/
+#include "kfmproject.h"
+
+#include "kfocustasklist.h"
+#include "kfocuslogbook.h"
+
+KFMProject::KFMProject()
+ : QObject(0,"KFMProject"), taskList_(NULL), logBook_(NULL)
+{
+ id_ = -1;
+ name_ = "Project";
+ taskList(new KFMTaskList());
+ logBook(new KFMLogBook());
+}
+
+KFMProject::~KFMProject(){
+ delete logBook_;
+ delete taskList_;
+}
+
+/////////////////////////////////////////////////////////////////
+// Private methods and slots
+
+void KFMProject::taskList(KFMTaskList* taskList){
+ if (taskList_ != taskList) {
+ if (taskList_ != NULL) {
+ disconnect(taskList_, 0, this, 0);
+ }
+
+ taskList_ = taskList;
+
+ if (taskList != NULL) {
+ connect(taskList_, SIGNAL( contentsChanged() ), this, SLOT( onTaskListContentsChanged() ));
+ }
+
+ emit contentsChanged();
+ }
+}
+
+
+void KFMProject::logBook(KFMLogBook* logBook){
+ if (logBook_ != logBook) {
+ if (logBook_ != NULL) {
+ disconnect(logBook_, 0, this, 0);
+ }
+
+ logBook_ = logBook;
+
+ if (logBook != NULL) {
+ connect(logBook_, SIGNAL( contentsChanged() ), this, SLOT( onLogBookContentsChanged() ));
+ }
+
+ emit contentsChanged();
+ }
+}
+
+void KFMProject::onTaskListContentsChanged(){
+ emit contentsChanged();
+}
+
+void KFMProject::onLogBookContentsChanged(){
+ emit contentsChanged();
+}
+
+
+///////////////////////////////////////////////////////////////////
+// Public methods and slots
+
+QString KFMProject::name() const{
+ return name_;
+}
+
+void KFMProject::name(QString name){
+ if (name_ != name) {
+ name_ = name;
+
+ emit nameChanged();
+ emit contentsChanged();
+ }
+}
+
+
+KFMTaskList* KFMProject::taskList() const{
+ return taskList_;
+}
+
+KFMLogBook* KFMProject::logBook() const{
+ return logBook_;
+}
+
+
+void KFMProject::clear(){
+ taskList_->clearTasks();
+ logBook_->clearEntries();
+ name("");
+}
+
+
+QString KFMProject::xmlTag(){
+ return QString("project");
+}
+
+QDomElement KFMProject::domElement(QDomDocument* doc){
+ QDomElement eProject = doc->createElement(xmlTag());
+
+ // Save the project id
+ eProject.setAttribute("id", id());
+
+ // Save project components
+ QDomElement eName = doc->createElement("name");
+ eName.appendChild(doc->createTextNode(name()));
+ eProject.appendChild(eName);
+
+ eProject.appendChild(taskList_->domElement(doc));
+ eProject.appendChild(logBook_->domElement(doc));
+
+ return eProject;
+}
+
+void KFMProject::domElement(QDomElement eProject){
+
+ // Load project id
+ id(eProject.attribute("id",QString::number(-1)).toInt());
+
+ // Load project components
+ QDomNode n = eProject.firstChild();
+ while (!n.isNull()) {
+ QDomElement e = n.toElement();
+ if (!e.isNull()) {
+ if (e.tagName() == "name") {
+ QDomText t = e.firstChild().toText();
+ name(t.data());
+ }
+ else if (e.tagName() == KFMTaskList::xmlTag()) {
+ taskList_->domElement(e);
+ }
+ else if (e.tagName() == KFMLogBook::xmlTag()) {
+ logBook_->domElement(e);
+ }
+ }
+
+ n = n.nextSibling();
+ }
+}
Added: kde-extras/kfocus/branches/upstream/current/kfocus/kfmproject.h
===================================================================
--- kde-extras/kfocus/branches/upstream/current/kfocus/kfmproject.h 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/kfocus/kfmproject.h 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,79 @@
+/***************************************************************************
+ kfmproject.h - description
+ -------------------
+ begin : Thu Aug 30 2001
+ copyright : (C) 2001 by Jeffrey Yu
+ email : wehjin at yahoo.com
+ ***************************************************************************/
+
+/***************************************************************************
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ ***************************************************************************/
+
+#ifndef KFMPROJECT_H
+#define KFMPROJECT_H
+
+#include <qobject.h>
+#include <qstring.h>
+#include <qdom.h>
+
+class KFMTaskList;
+class KFMLogBook;
+
+/**Project model class
+ *@author Jeffrey Yu
+ */
+
+class KFMProject : public QObject {
+Q_OBJECT
+public:
+ KFMProject();
+ ~KFMProject();
+
+ QString name() const;
+ void name(QString name);
+
+ KFMTaskList* taskList() const;
+ KFMLogBook* logBook() const;
+
+ void clear();
+
+ static QString xmlTag();
+ QDomElement domElement(QDomDocument* d);
+ void domElement(QDomElement eProject);
+
+ /** Get the project id */
+ int id() const {return id_;};
+ /** Set the project id. The id is normally set from the
+ projectlist. */
+ void id(const int id) {id_ = id;};
+
+signals:
+ void nameChanged();
+ void contentsChanged();
+
+private /* attributes */:
+ QString name_;
+ KFMTaskList* taskList_;
+ KFMLogBook* logBook_;
+
+ /** Project id */
+ int id_;
+
+private /* methods */:
+ void taskList(KFMTaskList* taskList);
+ void logBook(KFMLogBook* logBook);
+
+ void createWidgets();
+
+private slots:
+ void onTaskListContentsChanged();
+ void onLogBookContentsChanged();
+};
+
+#endif
Added: kde-extras/kfocus/branches/upstream/current/kfocus/kfmprojectlist.cpp
===================================================================
--- kde-extras/kfocus/branches/upstream/current/kfocus/kfmprojectlist.cpp 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/kfocus/kfmprojectlist.cpp 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,199 @@
+/***************************************************************************
+ kfmprojectlist.cpp - description
+ -------------------
+ begin : Sat Sep 1 2001
+ copyright : (C) 2001 by Jeffrey Yu
+ email : wehjin at yahoo.com
+ ***************************************************************************/
+
+/***************************************************************************
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ ***************************************************************************/
+
+#include "kfmprojectlist.h"
+
+#include "kfmproject.h"
+
+KFMProjectList::KFMProjectList()
+: QObject(), currentProject_(NULL)
+{
+ nextProjectId_ = 0;
+
+ projectList_.setAutoDelete(true);
+}
+
+KFMProjectList::~KFMProjectList(){
+ clear();
+}
+
+
+///////////////////////////////////////////////////////////////////
+// Public methods
+
+KFMProjectList::Iterator KFMProjectList::iterator() const{
+ return Iterator(projectList_);
+}
+
+void KFMProjectList::addProject(KFMProject* project){
+ if (project != NULL && (projectList_.findRef(project) < 0)) {
+ // Assign an id to projects that don't have one
+ if (project->id() < 0) {
+ project->id(nextProjectId());
+ }
+
+ // Note the ids that are in use
+ existingProjectId(project->id());
+
+ projectList_.append(project);
+ emit projectAdded(project);
+ emit contentsChanged();
+
+ currentProject(project);
+ }
+}
+
+void KFMProjectList::removeProject(KFMProject* project){
+ if (projectList_.findRef(project) >= 0) {
+ if (currentProject() == project) {
+ currentProject(NULL);
+ }
+
+ int pos = projectList_.findRef(project);
+ projectList_.removeRef(project);
+ emit projectRemoved(project, pos);
+ emit contentsChanged();
+ }
+}
+
+void KFMProjectList::clear(){
+ currentProject(NULL);
+
+ projectList_.clear();
+ nextProjectId_ = 0;
+ emit projectRemoved(NULL, -1);
+ emit contentsChanged();
+}
+
+//////////////////////////////////////////////
+
+int KFMProjectList::projectPosition(KFMProject* project) const{
+ if (project != NULL) {
+ return projectList_.findRef(project);
+ }
+ else {
+ return -1;
+ }
+}
+
+KFMProject* KFMProjectList::projectAt(int pos) const{
+ if (pos >= 0 && pos < (int)projectList_.count()) {
+ return projectList_.at(pos);
+ }
+ else {
+ return NULL;
+ }
+}
+
+KFMProject* KFMProjectList::firstProject() const{
+ return projectList_.first();
+}
+
+//////////////////////////////////////////////
+
+KFMProject* KFMProjectList::currentProject() const{
+ return currentProject_;
+}
+
+
+void KFMProjectList::currentProject(KFMProject* project){
+ if (project != currentProject_) {
+
+ if (currentProject_ != NULL) {
+ disconnect(currentProject_, 0, this, 0);
+ }
+
+ currentProject_ = project;
+
+ if (currentProject_ != NULL) {
+ connect(currentProject_, SIGNAL(contentsChanged()), this,
+ SLOT(onComponentContentsChanged()));
+ }
+
+ emit currentProjectChanged(currentProject_);
+ }
+}
+
+int KFMProjectList::currentPosition() const{
+ return projectPosition(currentProject());
+}
+
+//////////////////////////////////////////////
+
+QString KFMProjectList::xmlTag(){
+ return QString("projectlist");
+}
+
+QDomElement KFMProjectList::domElement(QDomDocument* doc){
+ QDomElement eProjectList = doc->createElement(xmlTag());
+
+ // Write down the id of the current project
+ if (currentProject() != NULL)
+ eProjectList.setAttribute("currentid", currentProject()->id());
+
+ Iterator it = iterator();
+ for (;it.current() != NULL; ++it) {
+ eProjectList.appendChild(it.current()->domElement(doc));
+ }
+
+ return eProjectList;
+}
+
+void KFMProjectList::domElement(QDomElement eProjectList){
+ // Read in the id of the current project
+ int currentid = eProjectList.attribute("currentid", QString("-1")).toInt();
+ KFMProject* currentProject = NULL;
+
+ QDomNode n = eProjectList.firstChild();
+ while (!n.isNull()) {
+ QDomElement e = n.toElement();
+ if (!e.isNull()) {
+ if (e.tagName() == KFMProject::xmlTag()) {
+
+ KFMProject* project = new KFMProject();
+ project->domElement(e);
+
+ addProject(project);
+ if (project->id() == currentid)
+ currentProject = project;
+ }
+ }
+ n = n.nextSibling();
+ }
+
+ if (currentProject != NULL) {
+ this->currentProject(currentProject);
+ }
+}
+
+
+///////////////////////////////////////////////////////
+// Private Methods
+
+/** Notify the projectlist of an existing project id. This method may
+ or may not alter the value of nextProjectId() */
+void KFMProjectList::existingProjectId(const int existingProjectId){
+
+ // Make sure we never assign an existing project id to
+ // another project.
+ if (nextProjectId_ <= existingProjectId)
+ nextProjectId_ = existingProjectId + 1;
+}
+
+void KFMProjectList::onComponentContentsChanged(){
+ emit contentsChanged();
+}
Added: kde-extras/kfocus/branches/upstream/current/kfocus/kfmprojectlist.h
===================================================================
--- kde-extras/kfocus/branches/upstream/current/kfocus/kfmprojectlist.h 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/kfocus/kfmprojectlist.h 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,124 @@
+/***************************************************************************
+ kfmprojectlist.h - description
+ -------------------
+ begin : Sat Sep 1 2001
+ copyright : (C) 2001 by Jeffrey Yu
+ email : wehjin at yahoo.com
+ ***************************************************************************/
+
+/***************************************************************************
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ ***************************************************************************/
+
+#ifndef KFMPROJECTLIST_H
+#define KFMPROJECTLIST_H
+
+#include <qobject.h>
+#include <qdom.h>
+#include <qstring.h>
+#include <qlist.h>
+
+class KFMProject;
+
+/**Model class containing a list of projects
+ *@author Jeffrey Yu
+ */
+
+class KFMProjectList : public QObject {
+ Q_OBJECT
+public:
+ KFMProjectList();
+ ~KFMProjectList();
+
+ ///////////////////////////////////////////////
+
+ typedef QListIterator<KFMProject> Iterator;
+
+ /** Retrieve an iterator over the projectList */
+ Iterator iterator() const;
+
+ /** Place a project into the projectList.
+ @param project The project to add
+ */
+ void addProject(KFMProject* project);
+
+ /** Remove a project from the projectList. The project is deleted.
+ @param project The project to delete */
+ void removeProject(KFMProject* project);
+
+ /** Clear the projectList of all projects. Projects are deleted. */
+ void clear();
+
+ ///////////////////////////////////////////////
+
+ /** Retrieve the position of a project in the projectList.
+ @param project The project to locate
+ */
+ int projectPosition(KFMProject* project) const;
+
+ /** Retrieve the project at a position in the projectList.
+ @param pos A position in the projectList
+ */
+ KFMProject* projectAt(int pos) const;
+
+ /** Retrieve the first project in the projectList. */
+ KFMProject* firstProject() const;
+
+ ///////////////////////////////////////////////
+
+ /** Retrieve the position of the current project. */
+ int currentPosition() const;
+
+ /** Select the current project. */
+ void currentProject(KFMProject* project);
+
+ /** Retrieve the current project. */
+ KFMProject* currentProject() const;
+
+ ///////////////////////////////////////////////
+
+ /** Retrieve the xml element tag for this class. */
+ static QString xmlTag();
+
+ /** Retrieve an xml element in DOM format that describes the projectList.
+ @param doc DOM document for generating DOM nodes
+ */
+ QDomElement domElement(QDomDocument* doc);
+
+ /** Initialize the projectList with data from an xml element in DOM format.
+ @param eProjectList DOM element containing projectList data
+ */
+ void domElement(QDomElement eProjectList);
+
+signals:
+ void projectAdded(KFMProject* project);
+ void projectRemoved(KFMProject* project, int pos);
+ void currentProjectChanged(KFMProject* project);
+ void contentsChanged();
+
+private: // Private Attributes
+ mutable QList<KFMProject> projectList_;
+ KFMProject* currentProject_;
+
+ /** Id to assign to the next project added to the projectlist */
+ int nextProjectId_;
+
+private: // Private Methods
+ /** Get the next project id */
+ int nextProjectId() {return nextProjectId_;};
+ /** Notify the projectlist of an existing project id. This method may
+ or may not alter the value of nextProjectId() */
+ void existingProjectId(const int existingProjectId);
+
+
+private slots:
+ void onComponentContentsChanged();
+
+};
+
+#endif
Added: kde-extras/kfocus/branches/upstream/current/kfocus/kfocus.cpp
===================================================================
--- kde-extras/kfocus/branches/upstream/current/kfocus/kfocus.cpp 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/kfocus/kfocus.cpp 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,496 @@
+/***************************************************************************
+ kfocus.cpp - description
+ -------------------
+ begin : Sun Aug 12 08:36:08 PDT 2001
+ copyright : (C) 2001 by Jeffrey Yu
+ email : jeffyu at cs.stanford.edu
+ ***************************************************************************/
+
+/***************************************************************************
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ ***************************************************************************/
+
+// include files for QT
+#include <qdir.h>
+#include <qprinter.h>
+#include <qpainter.h>
+
+// include files for KDE
+#include <kiconloader.h>
+#include <kmessagebox.h>
+#include <kfiledialog.h>
+#include <kmenubar.h>
+#include <klocale.h>
+#include <kconfig.h>
+#include <kstdaction.h>
+
+// application specific includes
+#include "kfocus.h"
+#include "kfocusview.h"
+#include "kfocusdoc.h"
+
+#define ID_STATUS_MSG 1
+
+KFocusApp::KFocusApp(QWidget* , const char* name):KMainWindow(0, name)
+{
+ config=kapp->config();
+
+ ///////////////////////////////////////////////////////////////////
+ // call inits to invoke all other construction parts
+ initStatusBar();
+ initActions();
+ initDocument();
+ initView();
+
+ readOptions();
+
+ ///////////////////////////////////////////////////////////////////
+ // disable actions at startup
+ fileSave->setEnabled(false);
+ fileSaveAs->setEnabled(false);
+ filePrint->setEnabled(false);
+ editCut->setEnabled(false);
+ editCopy->setEnabled(false);
+ editPaste->setEnabled(false);
+}
+
+KFocusApp::~KFocusApp()
+{
+
+}
+
+void KFocusApp::initActions()
+{
+ fileNewWindow = new KAction(i18n("New &Window"), 0, 0, this, SLOT(slotFileNewWindow()), actionCollection(),"file_new_window");
+ fileNew = KStdAction::openNew(this, SLOT(slotFileNew()), actionCollection());
+ fileOpen = KStdAction::open(this, SLOT(slotFileOpen()), actionCollection());
+ fileOpenRecent = KStdAction::openRecent(this, SLOT(slotFileOpenRecent(const KURL&)), actionCollection());
+ fileSave = KStdAction::save(this, SLOT(slotFileSave()), actionCollection());
+ fileSaveAs = KStdAction::saveAs(this, SLOT(slotFileSaveAs()), actionCollection());
+ fileClose = KStdAction::close(this, SLOT(slotFileClose()), actionCollection());
+ filePrint = KStdAction::print(this, SLOT(slotFilePrint()), actionCollection());
+ fileQuit = KStdAction::quit(this, SLOT(slotFileQuit()), actionCollection());
+ editCut = KStdAction::cut(this, SLOT(slotEditCut()), actionCollection());
+ editCopy = KStdAction::copy(this, SLOT(slotEditCopy()), actionCollection());
+ editPaste = KStdAction::paste(this, SLOT(slotEditPaste()), actionCollection());
+ viewToolBar = KStdAction::showToolbar(this, SLOT(slotViewToolBar()), actionCollection());
+ viewStatusBar = KStdAction::showStatusbar(this, SLOT(slotViewStatusBar()), actionCollection());
+
+ fileNewWindow->setStatusText(i18n("Opens a new application window"));
+ fileNew->setStatusText(i18n("Creates a new document"));
+ fileOpen->setStatusText(i18n("Opens an existing document"));
+ fileOpenRecent->setStatusText(i18n("Opens a recently used file"));
+ fileSave->setStatusText(i18n("Saves the actual document"));
+ fileSaveAs->setStatusText(i18n("Saves the actual document as..."));
+ fileClose->setStatusText(i18n("Closes the actual document"));
+ filePrint ->setStatusText(i18n("Prints out the actual document"));
+ fileQuit->setStatusText(i18n("Quits the application"));
+ editCut->setStatusText(i18n("Cuts the selected section and puts it to the clipboard"));
+ editCopy->setStatusText(i18n("Copies the selected section to the clipboard"));
+ editPaste->setStatusText(i18n("Pastes the clipboard contents to actual position"));
+ viewToolBar->setStatusText(i18n("Enables/disables the toolbar"));
+ viewStatusBar->setStatusText(i18n("Enables/disables the statusbar"));
+
+ // use the absolute path to your kfocusui.rc file for testing purpose in createGUI();
+ createGUI();
+
+}
+
+
+void KFocusApp::initStatusBar()
+{
+ ///////////////////////////////////////////////////////////////////
+ // STATUSBAR
+ // TODO: add your own items you need for displaying current application status.
+ statusBar()->insertItem(i18n("Ready."), ID_STATUS_MSG);
+}
+
+void KFocusApp::initDocument()
+{
+ doc = new KFocusDoc(this);
+ doc->newDocument();
+
+
+ connect(doc, SIGNAL(fileLoaded()), this, SLOT(onDocumentLoaded()));
+ connect(doc, SIGNAL(modifiedSet(bool)), this, SLOT(onDocumentModified(bool)));
+ connect(doc, SIGNAL(documentEmpty()), this, SLOT(onDocumentDeleted()));
+
+}
+
+void KFocusApp::initView()
+{
+ ////////////////////////////////////////////////////////////////////
+ // create the main widget here that is managed by KTMainWindow's view-region and
+ // connect the widget to your document to display document contents.
+
+ view = new KFocusView(this);
+ doc->addView(view);
+ setCentralWidget(view);
+ setCaption(doc->URL().fileName(),false);
+
+}
+
+void KFocusApp::openDocumentFile(const KURL& url)
+{
+ slotStatusMsg(i18n("Opening file..."));
+
+ doc->openDocument( url);
+ setCaption(url.fileName(), false);
+ fileOpenRecent->addURL( url );
+ slotStatusMsg(i18n("Ready."));
+}
+
+
+KFocusDoc *KFocusApp::getDocument() const
+{
+ return doc;
+}
+
+void KFocusApp::saveOptions()
+{
+ config->setGroup("General Options");
+ config->writeEntry("Geometry", size());
+ config->writeEntry("Show Toolbar", viewToolBar->isChecked());
+ config->writeEntry("Show Statusbar",viewStatusBar->isChecked());
+ config->writeEntry("ToolBarPos", (int) toolBar("mainToolBar")->barPos());
+ fileOpenRecent->saveEntries(config,"Recent Files");
+}
+
+
+void KFocusApp::readOptions()
+{
+
+ config->setGroup("General Options");
+
+ // bar status settings
+ bool bViewToolbar = config->readBoolEntry("Show Toolbar", true);
+ viewToolBar->setChecked(bViewToolbar);
+ slotViewToolBar();
+
+ bool bViewStatusbar = config->readBoolEntry("Show Statusbar", true);
+ viewStatusBar->setChecked(bViewStatusbar);
+ slotViewStatusBar();
+
+
+ // bar position settings
+ KToolBar::BarPosition toolBarPos;
+ toolBarPos=(KToolBar::BarPosition) config->readNumEntry("ToolBarPos", KToolBar::Top);
+ toolBar("mainToolBar")->setBarPos(toolBarPos);
+
+ // initialize the recent file list
+ fileOpenRecent->loadEntries(config,"Recent Files");
+
+ QSize size=config->readSizeEntry("Geometry");
+ if(!size.isEmpty())
+ {
+ resize(size);
+ }
+}
+
+void KFocusApp::saveProperties(KConfig *_cfg)
+{
+ if(doc->URL().fileName()!=i18n("Untitled") && !doc->isModified())
+ {
+ // saving to tempfile not necessary
+
+ }
+ else
+ {
+ KURL url=doc->URL();
+ _cfg->writeEntry("filename", url.url());
+ _cfg->writeEntry("modified", doc->isModified());
+ QString tempname = kapp->tempSaveName(url.url());
+ QString tempurl= KURL::encode_string(tempname);
+ KURL _url(tempurl);
+ doc->saveDocument(_url);
+ }
+}
+
+
+void KFocusApp::readProperties(KConfig* _cfg)
+{
+ QString filename = _cfg->readEntry("filename", "");
+ KURL url(filename);
+ bool modified = _cfg->readBoolEntry("modified", false);
+ if(modified)
+ {
+ bool canRecover;
+ QString tempname = kapp->checkRecoverFile(filename, canRecover);
+ KURL _url(tempname);
+
+ if(canRecover)
+ {
+ doc->openDocument(_url);
+ doc->setModified();
+ setCaption(_url.fileName(),true);
+ QFile::remove(tempname);
+ }
+ }
+ else
+ {
+ if(!filename.isEmpty())
+ {
+ doc->openDocument(url);
+ setCaption(url.fileName(),false);
+ }
+ }
+}
+
+bool KFocusApp::queryClose()
+{
+ /* This isn't very elegant, but we need to empty out the document
+ before continuing with a close. */
+ if (doc->saveModified()) {
+ doc->closeDocument();
+ return true;
+ }
+ else
+ return false;
+}
+
+bool KFocusApp::queryExit()
+{
+ saveOptions();
+ return true;
+}
+
+/////////////////////////////////////////////////////////////////////
+// SLOT IMPLEMENTATION
+/////////////////////////////////////////////////////////////////////
+
+void KFocusApp::slotFileNewWindow()
+{
+ slotStatusMsg(i18n("Opening a new application window..."));
+
+ KFocusApp *new_window= new KFocusApp();
+ new_window->show();
+
+ slotStatusMsg(i18n("Ready."));
+}
+
+void KFocusApp::slotFileNew()
+{
+ slotStatusMsg(i18n("Creating new document..."));
+
+ if(!doc->saveModified())
+ {
+ // here saving wasn't successful
+
+ }
+ else
+ {
+ doc->newDocument();
+ setCaption(doc->URL().fileName(), false);
+ }
+
+ slotStatusMsg(i18n("Ready."));
+
+}
+
+void KFocusApp::slotFileOpen()
+{
+ slotStatusMsg(i18n("Opening file..."));
+
+ if(!doc->saveModified())
+ {
+ // here saving wasn't successful
+
+ }
+ else
+ {
+ KURL url=KFileDialog::getOpenURL(QString::null,
+ i18n("*|All files"), this, i18n("Open File..."));
+ if(!url.isEmpty())
+ {
+ doc->openDocument(url);
+ setCaption(url.fileName(), false);
+ fileOpenRecent->addURL( url );
+ }
+ }
+ slotStatusMsg(i18n("Ready."));
+}
+
+void KFocusApp::slotFileOpenRecent(const KURL& url)
+{
+ slotStatusMsg(i18n("Opening file..."));
+
+ if(!doc->saveModified())
+ {
+ // here saving wasn't successful
+ }
+ else
+ {
+ doc->openDocument(url);
+ setCaption(url.fileName(), false);
+ }
+
+ slotStatusMsg(i18n("Ready."));
+}
+
+void KFocusApp::slotFileSave()
+{
+ if (doc->isUntitled()) {
+ slotFileSaveAs();
+ return;
+ }
+
+ slotStatusMsg(i18n("Saving file..."));
+
+ doc->saveDocument(doc->URL());
+
+ slotStatusMsg(i18n("Ready."));
+}
+
+void KFocusApp::slotFileSaveAs()
+{
+ slotStatusMsg(i18n("Saving file with a new filename..."));
+
+ KURL url=KFileDialog::getSaveURL(QDir::currentDirPath(),
+ i18n("*|All files"), this, i18n("Save as..."));
+ if(!url.isEmpty())
+ {
+ doc->saveDocument(url);
+ setCaption(url.fileName(), false);
+ fileOpenRecent->addURL(url);
+ }
+
+ slotStatusMsg(i18n("Ready."));
+}
+
+void KFocusApp::slotFileClose()
+{
+ slotStatusMsg(i18n("Closing file..."));
+
+ close();
+
+ /* The close may have destroys the window, so do NOT
+ attempt to update the status message */
+ // BAD CODE: slotStatusMsg(i18n("Ready."));
+}
+
+void KFocusApp::slotFilePrint()
+{
+ slotStatusMsg(i18n("Printing..."));
+
+ QPrinter printer;
+ if (printer.setup(this))
+ {
+ view->print(&printer);
+ }
+
+ slotStatusMsg(i18n("Ready."));
+}
+
+void KFocusApp::slotFileQuit()
+{
+ slotStatusMsg(i18n("Exiting..."));
+ saveOptions();
+ // close the first window, the list makes the next one the first again.
+ // This ensures that queryClose() is called on each window to ask for closing
+ KMainWindow* w;
+ if(memberList)
+ {
+ for(w=memberList->first(); w!=0; w=memberList->first())
+ {
+ // only close the window if the closeEvent is accepted. If the user presses
+ // Cancel on the saveModified() dialog, the window and the application stay open.
+ if(!w->close())
+ break;
+ }
+ }
+
+ /* The close may have destroys the window, so do NOT
+ attempt to update the status message */
+ // BAD CODE: slotStatusMsg(i18n("Ready."));
+}
+
+void KFocusApp::slotEditCut()
+{
+ slotStatusMsg(i18n("Cutting selection..."));
+
+ slotStatusMsg(i18n("Ready."));
+}
+
+void KFocusApp::slotEditCopy()
+{
+ slotStatusMsg(i18n("Copying selection to clipboard..."));
+
+ slotStatusMsg(i18n("Ready."));
+}
+
+void KFocusApp::slotEditPaste()
+{
+ slotStatusMsg(i18n("Inserting clipboard contents..."));
+
+ slotStatusMsg(i18n("Ready."));
+}
+
+void KFocusApp::slotViewToolBar()
+{
+ slotStatusMsg(i18n("Toggling toolbar..."));
+ ///////////////////////////////////////////////////////////////////
+ // turn Toolbar on or off
+ if(!viewToolBar->isChecked())
+ {
+ toolBar("mainToolBar")->hide();
+ }
+ else
+ {
+ toolBar("mainToolBar")->show();
+ }
+
+ slotStatusMsg(i18n("Ready."));
+}
+
+void KFocusApp::slotViewStatusBar()
+{
+ slotStatusMsg(i18n("Toggle the statusbar..."));
+ ///////////////////////////////////////////////////////////////////
+ //turn Statusbar on or off
+ if(!viewStatusBar->isChecked())
+ {
+ statusBar()->hide();
+ }
+ else
+ {
+ statusBar()->show();
+ }
+
+ slotStatusMsg(i18n("Ready."));
+
+}
+
+
+void KFocusApp::slotStatusMsg(const QString &text)
+{
+ ///////////////////////////////////////////////////////////////////
+ // change status message permanently
+ statusBar()->clear();
+ statusBar()->changeItem(text, ID_STATUS_MSG);
+}
+
+/** Slot for when the document is loaded */
+void KFocusApp::onDocumentLoaded(){
+ fileSaveAs->setEnabled(true);
+}
+
+/** Slot for when the document is modified */
+void KFocusApp::onDocumentModified(bool modified){
+ if (modified) {
+ fileSave->setEnabled(true);
+ }
+ else {
+ fileSave->setEnabled(false);
+ }
+}
+
+/** Slot for when the document is deleted */
+void KFocusApp::onDocumentDeleted(){
+ fileSave->setEnabled(false);
+ fileSaveAs->setEnabled(false);
+}
Added: kde-extras/kfocus/branches/upstream/current/kfocus/kfocus.h
===================================================================
--- kde-extras/kfocus/branches/upstream/current/kfocus/kfocus.h 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/kfocus/kfocus.h 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,196 @@
+/***************************************************************************
+ kfocus.h - description
+ -------------------
+ begin : Sun Aug 12 08:36:08 PDT 2001
+ copyright : (C) 2001 by Jeffrey Yu
+ email : jeffyu at cs.stanford.edu
+ ***************************************************************************/
+
+/***************************************************************************
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ ***************************************************************************/
+
+#ifndef KFOCUS_H
+#define KFOCUS_H
+
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+// include files for Qt
+
+// include files for KDE
+#include <kapp.h>
+#include <kmainwindow.h>
+#include <kaccel.h>
+#include <kaction.h>
+
+// forward declaration of the KFocus classes
+class KFocusDoc;
+class KFocusView;
+
+/**
+ * The base class for KFocus application windows. It sets up the main
+ * window and reads the config file as well as providing a menubar, toolbar
+ * and statusbar. An instance of KFocusView creates your center view, which is connected
+ * to the window's Doc object.
+ * KFocusApp reimplements the methods that KMainWindow provides for main window handling and supports
+ * full session management as well as using KActions.
+ * @see KMainWindow
+ * @see KApplication
+ * @see KConfig
+ *
+ * @author Source Framework Automatically Generated by KDevelop, (c) The KDevelop Team.
+ * @version KDevelop version 1.2 code generation
+ */
+class KFocusApp : public KMainWindow
+{
+ Q_OBJECT
+
+ friend class KFocusView;
+
+ public:
+ /** construtor of KFocusApp, calls all init functions to create the application.
+ */
+ KFocusApp(QWidget* parent=0, const char* name=0);
+ ~KFocusApp();
+ /** opens a file specified by commandline option
+ */
+ void openDocumentFile(const KURL& url=0);
+ /** returns a pointer to the current document connected to the KTMainWindow instance and is used by
+ * the View class to access the document object's methods
+ */
+ KFocusDoc *getDocument() const;
+
+ protected:
+ /** save general Options like all bar positions and status as well as the geometry and the recent file list to the configuration
+ * file
+ */
+ void saveOptions();
+ /** read general Options again and initialize all variables like the recent file list
+ */
+ void readOptions();
+ /** initializes the KActions of the application */
+ void initActions();
+ /** sets up the statusbar for the main window by initialzing a statuslabel.
+ */
+ void initStatusBar();
+ /** initializes the document object of the main window that is connected to the view in initView().
+ * @see initView();
+ */
+ void initDocument();
+ /** creates the centerwidget of the KTMainWindow instance and sets it as the view
+ */
+ void initView();
+ /** queryClose is called by KTMainWindow on each closeEvent of a window. Against the
+ * default implementation (only returns true), this calles saveModified() on the document object to ask if the document shall
+ * be saved if Modified; on cancel the closeEvent is rejected.
+ * @see KTMainWindow#queryClose
+ * @see KTMainWindow#closeEvent
+ */
+ virtual bool queryClose();
+ /** queryExit is called by KTMainWindow when the last window of the application is going to be closed during the closeEvent().
+ * Against the default implementation that just returns true, this calls saveOptions() to save the settings of the last window's
+ * properties.
+ * @see KTMainWindow#queryExit
+ * @see KTMainWindow#closeEvent
+ */
+ virtual bool queryExit();
+ /** saves the window properties for each open window during session end to the session config file, including saving the currently
+ * opened file by a temporary filename provided by KApplication.
+ * @see KTMainWindow#saveProperties
+ */
+ virtual void saveProperties(KConfig *_cfg);
+ /** reads the session config file and restores the application's state including the last opened files and documents by reading the
+ * temporary files saved by saveProperties()
+ * @see KTMainWindow#readProperties
+ */
+ virtual void readProperties(KConfig *_cfg);
+
+ public slots:
+ /** open a new application window by creating a new instance of KFocusApp */
+ void slotFileNewWindow();
+ /** clears the document in the actual view to reuse it as the new document */
+ void slotFileNew();
+ /** open a file and load it into the document*/
+ void slotFileOpen();
+ /** opens a file from the recent files menu */
+ void slotFileOpenRecent(const KURL& url);
+ /** save a document */
+ void slotFileSave();
+ /** save a document by a new filename*/
+ void slotFileSaveAs();
+ /** asks for saving if the file is modified, then closes the actual file and window*/
+ void slotFileClose();
+ /** print the actual file */
+ void slotFilePrint();
+ /** closes all open windows by calling close() on each memberList item until the list is empty, then quits the application.
+ * If queryClose() returns false because the user canceled the saveModified() dialog, the closing breaks.
+ */
+ void slotFileQuit();
+ /** put the marked text/object into the clipboard and remove
+ * it from the document
+ */
+ void slotEditCut();
+ /** put the marked text/object into the clipboard
+ */
+ void slotEditCopy();
+ /** paste the clipboard into the document
+ */
+ void slotEditPaste();
+ /** toggles the toolbar
+ */
+ void slotViewToolBar();
+ /** toggles the statusbar
+ */
+ void slotViewStatusBar();
+ /** changes the statusbar contents for the standard label permanently, used to indicate current actions.
+ * @param text the text that is displayed in the statusbar
+ */
+ void slotStatusMsg(const QString &text);
+
+ /** Slot for when the document is loaded */
+ void onDocumentLoaded();
+ /** Slot for when the document is modified */
+ void onDocumentModified(bool modified);
+ /** Slot for when the document is deleted */
+ void onDocumentDeleted();
+
+ private:
+ /** the configuration object of the application */
+ KConfig *config;
+ /** view is the main widget which represents your working area. The View
+ * class should handle all events of the view widget. It is kept empty so
+ * you can create your view according to your application's needs by
+ * changing the view class.
+ */
+ KFocusView *view;
+ /** doc represents your actual document and is created only once. It keeps
+ * information such as filename and does the serialization of your files.
+ */
+ KFocusDoc *doc;
+
+ // KAction pointers to enable/disable actions
+ KAction* fileNewWindow;
+ KAction* fileNew;
+ KAction* fileOpen;
+ KRecentFilesAction* fileOpenRecent;
+ KAction* fileSave;
+ KAction* fileSaveAs;
+ KAction* fileClose;
+ KAction* filePrint;
+ KAction* fileQuit;
+ KAction* editCut;
+ KAction* editCopy;
+ KAction* editPaste;
+ KToggleAction* viewToolBar;
+ KToggleAction* viewStatusBar;
+};
+
+#endif // KFOCUS_H
Added: kde-extras/kfocus/branches/upstream/current/kfocus/kfvprojectlist.cpp
===================================================================
--- kde-extras/kfocus/branches/upstream/current/kfocus/kfvprojectlist.cpp 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/kfocus/kfvprojectlist.cpp 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,230 @@
+/***************************************************************************
+ kfvprojectlist.cpp - description
+ -------------------
+ begin : Sat Sep 1 2001
+ copyright : (C) 2001 by Jeffrey Yu
+ email : wehjin at yahoo.com
+ ***************************************************************************/
+
+/***************************************************************************
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ ***************************************************************************/
+
+#include "kfvprojectlist.h"
+
+#include <qlayout.h>
+#include <qlabel.h>
+#include <qlistbox.h>
+#include <qframe.h>
+#include <qpushbutton.h>
+
+#include "kfmprojectlist.h"
+#include "kfmproject.h"
+
+#include "kfvproject.h"
+
+KFVProjectList::KFVProjectList(QWidget *parent, const char *name )
+ : QWidget(parent,name)
+{
+ projectList_ = NULL;
+ currentPosition_ = -1;
+
+ createWidgets();
+}
+
+KFVProjectList::~KFVProjectList(){
+}
+
+
+////////////////////////////////////////////////////////////
+// Private methods
+
+void KFVProjectList::createWidgets(){
+ setEnabled(false);
+
+ QHBoxLayout* hbl = new QHBoxLayout(this);
+ hbl->setSpacing(5);
+ hbl->setMargin(5);
+
+ createListWidgets(hbl);
+
+ QHBoxLayout* hblDivider = new QHBoxLayout(hbl);
+ hblDivider->setSpacing(0);
+ QFrame* frame = new QFrame(this);
+ frame->setFrameStyle(QFrame::VLine | QFrame::Raised);
+ hblDivider->addWidget(frame);
+ frame = new QFrame(this);
+ frame->setFrameStyle(QFrame::VLine | QFrame::Raised);
+ hblDivider->addWidget(frame);
+
+ vProject_ = new KFVProject(this);
+ hbl->addWidget(vProject_);
+}
+
+void KFVProjectList::createListWidgets(QLayout* lParent){
+ QVBoxLayout* vbl = new QVBoxLayout(lParent);
+ vbl->setSpacing(5);
+ vbl->setMargin(5);
+
+ QLabel* lProject = new QLabel("Project", this);
+ vbl->addWidget(lProject);
+
+ lbNames_ = new QListBox(this);
+ lbNames_->setMinimumWidth(120);
+ lbNames_->setSizePolicy(QSizePolicy(QSizePolicy::Preferred, QSizePolicy::Expanding));
+ connect(lbNames_, SIGNAL(currentChanged(QListBoxItem*)), this,
+ SLOT(onLbNamesCurrentChanged(QListBoxItem*)));
+ vbl->addWidget(lbNames_);
+
+ createButtonWidgets(vbl);
+
+}
+
+
+void KFVProjectList::createButtonWidgets(QLayout* lParent){
+ QHBoxLayout* hbl = new QHBoxLayout(lParent);
+ hbl->setSpacing(5);
+
+ pbNew_ = new QPushButton("New", this);
+ connect(pbNew_, SIGNAL(clicked()), this, SLOT(onPbNewClicked()));
+ hbl->addWidget(pbNew_);
+
+ pbDelete_ = new QPushButton("Delete", this);
+ pbDelete_->setEnabled(false);
+ connect(pbDelete_, SIGNAL(clicked()), this, SLOT(onPbDeleteClicked()));
+ hbl->addWidget(pbDelete_);
+}
+
+
+void KFVProjectList::currentPosition(int position, bool prevDeleted){
+ if (position != currentPosition_) {
+ if (currentPosition_ >= 0) {
+ if (!prevDeleted) {
+ disconnect(projectList_->projectAt(currentPosition_), 0, this, 0);
+ }
+ pbDelete_->setEnabled(false);
+ vProject_->project(NULL);
+ lbNames_->setSelected(currentPosition_, false);
+ lbNames_->setCurrentItem(-1);
+ }
+
+ currentPosition_ = position;
+
+ if (currentPosition_ >= 0) {
+ lbNames_->setCurrentItem(currentPosition_);
+ lbNames_->setSelected(currentPosition_, true);
+ vProject_->project(projectList_->projectAt(currentPosition_));
+ pbDelete_->setEnabled(true);
+ connect(projectList_->projectAt(currentPosition_), SIGNAL(nameChanged()), this,
+ SLOT(onCurrentProjectNameChanged()));
+ }
+ }
+}
+
+void KFVProjectList::onProjectListCurrentProjectChanged(KFMProject* project){
+ currentPosition(projectList_->projectPosition(project));
+}
+
+void KFVProjectList::onProjectListProjectAdded(KFMProject* project){
+ lbNames_->insertItem(project->name(), projectList_->projectPosition(project));
+}
+
+void KFVProjectList::onProjectListProjectRemoved(KFMProject* project, int pos){
+ if (project == NULL) {
+ currentPosition(-1, true);
+ lbNames_->clear();
+ }
+ else {
+ if (currentPosition_ == pos) {
+ currentPosition(-1, true);
+ }
+ lbNames_->removeItem(pos);
+ }
+}
+
+void KFVProjectList::onCurrentProjectNameChanged(){
+ lbNames_->changeItem(projectList_->currentProject()->name(),
+ projectList_->currentPosition());
+}
+
+void KFVProjectList::onLbNamesCurrentChanged(QListBoxItem* /*item*/){
+ if (projectList_ != NULL) {
+ projectList_->currentProject(projectList_->projectAt(lbNames_->currentItem()));
+ }
+}
+
+void KFVProjectList::onPbNewClicked(){
+ if (projectList_ != NULL) {
+ KFMProject* project = new KFMProject();
+ projectList_->addProject(project);
+
+ /* Let the user alter the name of the project. However, projectList_
+ may have changed due to signals emitted from addProject, so check
+ it first */
+ if (projectList_ != NULL && projectList_->currentProject() == project) {
+ vProject_->changeName();
+ }
+ }
+}
+
+void KFVProjectList::onPbDeleteClicked(){
+ if (projectList_ != NULL) {
+ projectList_->removeProject(projectList_->currentProject());
+ }
+}
+
+////////////////////////////////////////////////////////////////
+// Public methods
+
+KFMProjectList* KFVProjectList::projectList() const{
+ return projectList_;
+}
+
+void KFVProjectList::projectList(KFMProjectList* projectList, bool prevDeleted){
+ if (projectList != projectList_) {
+ if (projectList_ != NULL) {
+ // Do stuff to clear the projectList
+
+ // Disable self
+ setEnabled(false);
+
+ // Stop listening to projectList signals
+ if (!prevDeleted) {
+ disconnect(projectList_, 0, this, 0);
+ }
+
+ // Empty widget contents
+ currentPosition(-1, prevDeleted);
+ lbNames_->clear();
+ }
+
+ projectList_ = projectList;
+
+ if (projectList_ != NULL) {
+ // Do stuff to setup the projectList
+
+ // Update widget contents
+ KFMProjectList::Iterator it = projectList_->iterator();
+ for (; it.current() != NULL; ++it) {
+ lbNames_->insertItem(it.current()->name());
+ }
+ currentPosition(projectList_->currentPosition());
+
+ // Listen to projectList signals
+ connect(projectList_, SIGNAL(currentProjectChanged(KFMProject*)), this,
+ SLOT(onProjectListCurrentProjectChanged(KFMProject*)));
+ connect(projectList_, SIGNAL(projectAdded(KFMProject*)), this,
+ SLOT(onProjectListProjectAdded(KFMProject*)));
+ connect(projectList_, SIGNAL(projectRemoved(KFMProject*,int)), this,
+ SLOT(onProjectListProjectRemoved(KFMProject*,int)));
+
+ // Enable self
+ setEnabled(true);
+ }
+ }
+}
Added: kde-extras/kfocus/branches/upstream/current/kfocus/kfvprojectlist.h
===================================================================
--- kde-extras/kfocus/branches/upstream/current/kfocus/kfvprojectlist.h 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/kfocus/kfvprojectlist.h 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,81 @@
+/***************************************************************************
+ kfvprojectlist.h - description
+ -------------------
+ begin : Sat Sep 1 2001
+ copyright : (C) 2001 by Jeffrey Yu
+ email : wehjin at yahoo.com
+ ***************************************************************************/
+
+/***************************************************************************
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ ***************************************************************************/
+
+#ifndef KFVPROJECTLIST_H
+#define KFVPROJECTLIST_H
+
+#include <qwidget.h>
+
+class QLayout;
+class QListBox;
+class QListBoxItem;
+class QPushButton;
+
+class KFMProjectList;
+class KFMProject;
+
+class KFVProject;
+
+/**View of a projectList
+ *@author Jeffrey Yu
+ */
+
+class KFVProjectList : public QWidget {
+ Q_OBJECT
+public:
+ KFVProjectList(QWidget *parent=0, const char *name=0);
+ ~KFVProjectList();
+
+ ////////////////////////////////////////////////
+
+ /** Retrieve the projectList for this view. */
+ KFMProjectList* projectList() const;
+
+ /** Select the projectList for this view.
+ @param projectList The projectList to select
+ */
+ void projectList(KFMProjectList* projectList, bool prevDeleted = false);
+
+private:
+ KFVProject* vProject_;
+ QListBox* lbNames_;
+ QPushButton* pbNew_;
+ QPushButton* pbDelete_;
+ int currentPosition_;
+
+ KFMProjectList* projectList_;
+
+private: // Private methods
+ void createWidgets();
+ void createListWidgets(QLayout* lParent);
+ void createButtonWidgets(QLayout* lParent);
+
+ /** Change the current position
+ @param pos Position to select */
+ void currentPosition(int pos, bool prevDeleted = false);
+
+private slots: // Private slots
+ void onProjectListCurrentProjectChanged(KFMProject* project);
+ void onProjectListProjectAdded(KFMProject* project);
+ void onProjectListProjectRemoved(KFMProject* project, int pos);
+ void onCurrentProjectNameChanged();
+ void onLbNamesCurrentChanged(QListBoxItem* item);
+ void onPbNewClicked();
+ void onPbDeleteClicked();
+};
+
+#endif
Added: kde-extras/kfocus/branches/upstream/current/po/Makefile.in
===================================================================
--- kde-extras/kfocus/branches/upstream/current/po/Makefile.in 2005-10-02 12:26:03 UTC (rev 1889)
+++ kde-extras/kfocus/branches/upstream/current/po/Makefile.in 2005-10-02 13:45:49 UTC (rev 1890)
@@ -0,0 +1,350 @@
+# KDE tags expanded automatically by am_edit - $Revision: 1.1.1.1 $
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+####### kdevelop will overwrite this part!!! (begin)##########
+
+####### kdevelop will overwrite this part!!! (end)############
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+#>-
+bindir = @bindir@
+#>+ 3
+DEPDIR = .deps
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+ARTSCCONFIG = @ARTSCCONFIG@
+AS = @AS@
+AUTODIRS = @AUTODIRS@
+CC = @CC@
+CONF_FILES = @CONF_FILES@
+CPP = @CPP@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DCOPIDL = @DCOPIDL@
+DCOPIDL2CPP = @DCOPIDL2CPP@
+DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
+DLLTOOL = @DLLTOOL@
+DPMSINC = @DPMSINC@
+DPMSLIB = @DPMSLIB@
+EXEEXT = @EXEEXT@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+GLINC = @GLINC@
+GLLIB = @GLLIB@
+GMSGFMT = @GMSGFMT@
+IDL = @IDL@
+IDL_DEPENDENCIES = @IDL_DEPENDENCIES@
+KDB2HTML = @KDB2HTML@
+KDECONFIG = @KDECONFIG@
+KDE_CXXFLAGS = @KDE_CXXFLAGS@
+KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
+KDE_INCLUDES = @KDE_INCLUDES@
+KDE_LDFLAGS = @KDE_LDFLAGS@
+KDE_PLUGIN = @KDE_PLUGIN@
+KDE_RPATH = @KDE_RPATH@
+KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
+KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
+KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
+KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
+LIBCOMPAT = @LIBCOMPAT@
+LIBCRYPT = @LIBCRYPT@
+LIBDL = @LIBDL@
+LIBJPEG = @LIBJPEG@
+LIBMICO = @LIBMICO@
+LIBOBJS = @LIBOBJS@
+LIBPNG = @LIBPNG@
+LIBPTHREAD = @LIBPTHREAD@
+LIBPYTHON = @LIBPYTHON@
+LIBQIMGIO = @LIBQIMGIO@
+LIBSM = @LIBSM@
+LIBSOCKET = @LIBSOCKET@
+LIBTIFF = @LIBTIFF@
+LIBTOOL = @LIBTOOL@
+LIBUCB = @LIBUCB@
+LIBZ = @LIBZ@
+LIB_KAB = @LIB_KAB@
+LIB_KDECORE = @LIB_KDECORE@
+LIB_KDEUI = @LIB_KDEUI@
+LIB_KFILE = @LIB_KFILE@
+LIB_KFM = @LIB_KFM@
+LIB_KFORMULA = @LIB_KFORMULA@
+LIB_KHTML = @LIB_KHTML@
+LIB_KIMGIO = @LIB_KIMGIO@
+LIB_KIO = @LIB_KIO@
+LIB_KPARTS = @LIB_KPARTS@
+LIB_KSPELL = @LIB_KSPELL@
+LIB_KSYCOCA = @LIB_KSYCOCA@
+LIB_KWRITE = @LIB_KWRITE@
+LIB_QT = @LIB_QT@
+LIB_SMB = @LIB_SMB@
+LIB_X11 = @LIB_X11@
+LN_S = @LN_S@
+MAKEINFO = @MAKEINFO@
+MCOPIDL = @MCOPIDL@
+MICO_INCLUDES = @MICO_INCLUDES@
+MICO_LDFLAGS = @MICO_LDFLAGS@
+MOC = @MOC@
+MSGFMT = @MSGFMT@
+NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
+NOREPO = @NOREPO@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PAMINC = @PAMINC@
+PAMLIBPATHS = @PAMLIBPATHS@
+PAMLIBS = @PAMLIBS@
+PYTHONINC = @PYTHONINC@
+PYTHONLIB = @PYTHONLIB@
+PYTHONMODDIR = @PYTHONMODDIR@
+QT_INCLUDES = @QT_INCLUDES@
+QT_LDFLAGS = @QT_LDFLAGS@
+RANLIB = @RANLIB@
+REPO = @REPO@
+STRIP = @STRIP@
+TOPSUBDIRS = @TOPSUBDIRS@
+UIC = @UIC@
+USER_INCLUDES = @USER_INCLUDES@
+USER_LDFLAGS = @USER_LDFLAGS@
+USE_EXCEPTIONS = @USE_EXCEPTIONS@
+USE_RTTI = @USE_RTTI@
+USE_THREADS = @USE_THREADS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XPMINC = @XPMINC@
+XPMLIB = @XPMLIB@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_INCLUDES = @X_INCLUDES@
+X_LDFLAGS = @X_LDFLAGS@
+X_PRE_LIBS = @X_PRE_LIBS@
+all_includes = @all_includes@
+all_libraries = @all_libraries@
+idldir = @idldir@
+kde_appsdir = @kde_appsdir@
+kde_bindir = @kde_bindir@
+kde_confdir = @kde_confdir@
+kde_datadir = @kde_datadir@
+kde_htmldir = @kde_htmldir@
+kde_icondir = @kde_icondir@
+kde_includes = @kde_includes@
+kde_libraries = @kde_libraries@
+kde_libs_htmldir = @kde_libs_htmldir@
+kde_libs_prefix = @kde_libs_prefix@
+kde_locale = @kde_locale@
+kde_mimedir = @kde_mimedir@
+kde_moduledir = @kde_moduledir@
+kde_servicesdir = @kde_servicesdir@
+kde_servicetypesdir = @kde_servicetypesdir@
+kde_sounddir = @kde_sounddir@
+kde_templatesdir = @kde_templatesdir@
+kde_wallpaperdir = @kde_wallpaperdir@
+micodir = @micodir@
+qt_includes = @qt_includes@
+qt_libraries = @qt_libraries@
+x_includes = @x_includes@
+x_libraries = @x_libraries@
+
+POFILES = AUTO
+mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES =
+DIST_COMMON = Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+#>- all: all-redirect
+#>+ 1
+all: docs-am all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+#>- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps po/Makefile
+#>+ 2
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps po/Makefile
+ cd $(top_srcdir) && perl admin/am_edit po/Makefile.in
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = po
+
+distdir: $(DISTFILES)
+#>- @for file in $(DISTFILES); do \
+#>- d=$(srcdir); \
+#>- if test -d $$d/$$file; then \
+#>- cp -pr $$/$$file $(distdir)/$$file; \
+#>- else \
+#>- test -f $(distdir)/$$file \
+#>- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+#>- || cp -p $$d/$$file $(distdir)/$$file || :; \
+#>- fi; \
+#>- done
+#>+ 10
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile
+all-redirect: all-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am: mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am: clean-generic mostlyclean-am
+
+#>- clean: clean-am
+#>+ 1
+clean: kde-rpo-clean clean-am
+
+distclean-am: distclean-generic clean-am
+ -rm -f libtool
+
+distclean: distclean-am
+
+maintainer-clean-am: maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
+
+#>+ 2
+docs-am:
+
+#>+ 5
+force-reedit:
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps po/Makefile
+ cd $(top_srcdir) && perl admin/am_edit po/Makefile.in
+
+
+#>+ 2
+final:
+ $(MAKE) all-am
+#>+ 2
+no-final:
+ $(MAKE) all-am
+#>+ 3
+cvs-clean:
+ $(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean
+
+#>+ 3
+kde-rpo-clean:
+ -rm -f *.rpo
Added: kde-extras/kfocus/branches/upstream/current/stamp-h.in
===================================================================
More information about the pkg-kde-commits
mailing list