rev 3138 - kde-extras/rsibreak/trunk/debian/patches
Tom Albers
tomalbers-guest at costa.debian.org
Sat Feb 18 17:01:54 UTC 2006
Author: tomalbers-guest
Date: 2006-02-18 17:01:52 +0000 (Sat, 18 Feb 2006)
New Revision: 3138
Modified:
kde-extras/rsibreak/trunk/debian/patches/98_buildprep.diff
Log:
Updated for 0.5.0-rc
Modified: kde-extras/rsibreak/trunk/debian/patches/98_buildprep.diff
===================================================================
--- kde-extras/rsibreak/trunk/debian/patches/98_buildprep.diff 2006-02-18 12:20:43 UTC (rev 3137)
+++ kde-extras/rsibreak/trunk/debian/patches/98_buildprep.diff 2006-02-18 17:01:52 UTC (rev 3138)
@@ -1,59 +1,5 @@
#DPATCHLEVEL=0
# vi: ft=diff
---- Makefile.in
-+++ Makefile.in
-@@ -210,6 +210,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -354,7 +357,7 @@
- .SUFFIXES:
- am--refresh:
- @:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/admin/deps.am $(srcdir)/admin/Doxyfile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/admin/deps.am $(srcdir)/admin/Doxyfile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -396,12 +399,12 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- #>- cd $(srcdir) && $(AUTOCONF)
- #>+ 2
- cd $(srcdir) && rm -f configure
- cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
- config.h: stamp-h1
-@@ -413,7 +416,7 @@
- stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
--$(srcdir)/config.h.in: $(am__configure_deps)
-+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_srcdir) && $(AUTOHEADER)
- rm -f stamp-h1
- touch $@
-@@ -922,7 +925,7 @@
- .NOEXPORT:
-
- #>+ 2
--KDE_DIST=Mainpage.dox subdirs Makefile.in configure.files config.h.in configure.in rsibreak.lsm Makefile.cvs aclocal.m4 configure.in.in configure Makefile.am acinclude.m4 Makefile.am.in
-+KDE_DIST=stamp-h.in Mainpage.dox subdirs Makefile.in configure.files config.h.in configure.in rsibreak.lsm Makefile.cvs aclocal.m4 configure.in.in configure Makefile.am acinclude.m4 Makefile.am.in
-
- #>+ 2
- docs-am:
--- acinclude.m4
+++ acinclude.m4
@@ -2144,9 +2144,6 @@
@@ -66,7 +12,7 @@
AC_TRY_COMPILE([
$2
],
-@@ -5917,30 +5914,15 @@
+@@ -5970,30 +5967,15 @@
fi
])
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
@@ -102,7 +48,7 @@
# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-@@ -6000,7 +5982,7 @@
+@@ -6053,7 +6035,7 @@
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
# Always use our own libtool.
@@ -111,7 +57,7 @@
AC_SUBST(LIBTOOL)dnl
# Prevent multiple expansion
-@@ -6050,7 +6032,7 @@
+@@ -6103,7 +6085,7 @@
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
@@ -120,7 +66,7 @@
[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
# Same as above, but do not quote variable references.
-@@ -6070,7 +6052,7 @@
+@@ -6123,7 +6105,7 @@
default_ofile=libtool
can_build_shared=yes
@@ -129,7 +75,7 @@
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
-@@ -6118,6 +6100,8 @@
+@@ -6171,6 +6153,8 @@
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
@@ -138,7 +84,7 @@
# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
-@@ -6163,6 +6147,48 @@
+@@ -6216,6 +6200,48 @@
])# _LT_AC_SYS_COMPILER
@@ -187,7 +133,7 @@
# _LT_AC_SYS_LIBPATH_AIX
# ----------------------
# Links a minimal program and checks the executable
-@@ -6235,15 +6261,15 @@
+@@ -6288,15 +6314,15 @@
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
@@ -206,7 +152,7 @@
(test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
then
break
-@@ -6412,14 +6438,13 @@
+@@ -6465,14 +6491,13 @@
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
@@ -223,7 +169,7 @@
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
-@@ -6431,7 +6456,6 @@
+@@ -6484,7 +6509,6 @@
esac
;;
*64-bit*)
@@ -231,7 +177,7 @@
case $host in
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
-@@ -6496,7 +6520,7 @@
+@@ -6549,7 +6573,7 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
@@ -240,7 +186,7 @@
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-@@ -6506,8 +6530,10 @@
+@@ -6559,8 +6583,10 @@
echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
@@ -253,7 +199,7 @@
$2=yes
fi
fi
-@@ -6533,11 +6559,16 @@
+@@ -6586,11 +6612,16 @@
LDFLAGS="$LDFLAGS $3"
printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -271,7 +217,7 @@
else
$2=yes
fi
-@@ -6561,7 +6592,7 @@
+@@ -6614,7 +6645,7 @@
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
@@ -280,7 +226,7 @@
case $build_os in
msdosdjgpp*)
-@@ -6590,20 +6621,53 @@
+@@ -6643,20 +6674,53 @@
lt_cv_sys_max_cmd_len=8192;
;;
@@ -340,7 +286,7 @@
# Add a significant safety factor because C++ compilers can tack on massive
# amounts of additional arguments before passing them to the linker.
# It appears as though 1/2 is a usable value.
-@@ -6699,7 +6763,7 @@
+@@ -6752,7 +6816,7 @@
}]
EOF
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -349,7 +295,7 @@
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) $1 ;;
-@@ -6753,7 +6817,7 @@
+@@ -6806,7 +6870,7 @@
lt_cv_dlopen_self=yes
])
;;
@@ -358,7 +304,7 @@
*)
AC_CHECK_FUNC([shl_load],
[lt_cv_dlopen="shl_load"],
-@@ -6842,20 +6906,13 @@
+@@ -6895,20 +6959,13 @@
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
@@ -380,7 +326,7 @@
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-@@ -6867,13 +6924,18 @@
+@@ -6920,13 +6977,18 @@
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
@@ -403,7 +349,7 @@
cd ..
rmdir conftest
$rm conftest*
-@@ -6932,8 +6994,8 @@
+@@ -6985,8 +7047,8 @@
[AC_MSG_CHECKING([how to hardcode library paths into programs])
_LT_AC_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
@@ -414,7 +360,7 @@
# We can hardcode non-existant directories.
if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-@@ -6990,7 +7052,7 @@
+@@ -7043,7 +7105,7 @@
*)
AC_MSG_RESULT([no])
;;
@@ -423,7 +369,7 @@
fi
])# AC_LIBTOOL_SYS_LIB_STRIP
-@@ -7003,7 +7065,7 @@
+@@ -7056,7 +7118,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -432,7 +378,7 @@
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
-@@ -7013,7 +7075,20 @@
+@@ -7066,7 +7128,20 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
@@ -454,7 +400,7 @@
need_lib_prefix=unknown
hardcode_into_libs=no
-@@ -7078,7 +7153,7 @@
+@@ -7131,7 +7206,7 @@
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
@@ -463,7 +409,7 @@
;;
beos*)
-@@ -7087,7 +7162,7 @@
+@@ -7140,7 +7215,7 @@
shlibpath_var=LIBRARY_PATH
;;
@@ -472,7 +418,7 @@
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-@@ -7103,7 +7178,7 @@
+@@ -7156,7 +7231,7 @@
cygwin* | mingw* | pw32*)
version_type=windows
@@ -481,7 +427,7 @@
need_version=no
need_lib_prefix=no
-@@ -7115,7 +7190,8 @@
+@@ -7168,7 +7243,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
@@ -491,7 +437,7 @@
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
-@@ -7145,7 +7221,7 @@
+@@ -7198,7 +7274,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -500,7 +446,7 @@
;;
esac
;;
-@@ -7168,7 +7244,7 @@
+@@ -7221,7 +7297,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
@@ -509,7 +455,7 @@
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-@@ -7191,7 +7267,7 @@
+@@ -7244,7 +7320,7 @@
dynamic_linker=no
;;
@@ -518,7 +464,7 @@
version_type=linux
need_lib_prefix=no
need_version=no
-@@ -7203,8 +7279,17 @@
+@@ -7256,8 +7332,17 @@
dynamic_linker='GNU ld.so'
;;
@@ -538,7 +484,7 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
-@@ -7222,7 +7307,7 @@
+@@ -7275,7 +7360,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
@@ -547,7 +493,7 @@
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
-@@ -7249,9 +7334,9 @@
+@@ -7302,9 +7387,9 @@
version_type=sunos
need_lib_prefix=no
need_version=no
@@ -559,7 +505,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
-@@ -7266,7 +7351,7 @@
+@@ -7319,7 +7404,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
@@ -568,7 +514,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-@@ -7277,7 +7362,7 @@
+@@ -7330,7 +7415,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
@@ -577,7 +523,7 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-@@ -7339,22 +7424,19 @@
+@@ -7392,22 +7477,19 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
@@ -606,7 +552,7 @@
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
-@@ -7364,6 +7446,30 @@
+@@ -7417,6 +7499,30 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -637,7 +583,7 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -7373,7 +7479,7 @@
+@@ -7426,7 +7532,7 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
@@ -646,7 +592,7 @@
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
-@@ -7402,7 +7508,11 @@
+@@ -7455,7 +7561,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
@@ -659,7 +605,7 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
-@@ -7422,7 +7532,7 @@
+@@ -7475,7 +7585,7 @@
os2*)
libname_spec='$name'
@@ -668,7 +614,7 @@
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
-@@ -7568,7 +7678,9 @@
+@@ -7621,7 +7731,9 @@
case $tagname in
CXX)
@@ -679,7 +625,7 @@
AC_LIBTOOL_LANG_CXX_CONFIG
else
tagname=""
-@@ -7630,7 +7742,7 @@
+@@ -7683,7 +7795,7 @@
# AC_LIBTOOL_WIN32_DLL
# --------------------
@@ -688,7 +634,7 @@
AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
])# AC_LIBTOOL_WIN32_DLL
-@@ -7804,7 +7916,7 @@
+@@ -7857,7 +7969,7 @@
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
@@ -697,7 +643,7 @@
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
-@@ -7914,7 +8026,7 @@
+@@ -7967,7 +8079,7 @@
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
@@ -706,7 +652,7 @@
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
-@@ -7946,7 +8058,7 @@
+@@ -7999,7 +8111,7 @@
AC_DEFUN([AC_PROG_LD_GNU],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
@@ -715,7 +661,7 @@
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
-@@ -7973,6 +8085,15 @@
+@@ -8026,6 +8138,15 @@
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
@@ -731,7 +677,7 @@
])# AC_PROG_LD_RELOAD_FLAG
-@@ -8006,44 +8127,36 @@
+@@ -8059,44 +8180,36 @@
lt_cv_deplibs_check_method=pass_all
;;
@@ -787,7 +733,7 @@
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
-@@ -8059,7 +8172,7 @@
+@@ -8112,7 +8225,7 @@
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
@@ -796,7 +742,7 @@
ia64*)
lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-@@ -8076,42 +8189,21 @@
+@@ -8129,42 +8242,21 @@
;;
irix5* | irix6* | nonstopux*)
@@ -846,7 +792,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
-@@ -8130,19 +8222,14 @@
+@@ -8183,19 +8275,14 @@
;;
openbsd*)
@@ -868,7 +814,7 @@
lt_cv_deplibs_check_method=pass_all
;;
-@@ -8152,7 +8239,6 @@
+@@ -8205,7 +8292,6 @@
solaris*)
lt_cv_deplibs_check_method=pass_all
@@ -876,7 +822,7 @@
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-@@ -8260,13 +8346,13 @@
+@@ -8313,13 +8399,13 @@
# -----------------------------------
# sets LIBLTDL to the link flags for the libltdl convenience library and
# LTDLINCL to the include flags for the libltdl header and adds
@@ -897,7 +843,7 @@
AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case $enable_ltdl_convenience in
-@@ -8285,13 +8371,13 @@
+@@ -8338,13 +8424,13 @@
# -----------------------------------
# sets LIBLTDL to the link flags for the libltdl installable library and
# LTDLINCL to the include flags for the libltdl header and adds
@@ -918,7 +864,7 @@
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-@@ -8329,10 +8415,21 @@
+@@ -8382,10 +8468,21 @@
# ---------------
AC_DEFUN([_LT_AC_LANG_CXX],
[AC_REQUIRE([AC_PROG_CXX])
@@ -941,7 +887,7 @@
# AC_LIBTOOL_F77
# --------------
-@@ -8405,6 +8502,10 @@
+@@ -8458,6 +8555,10 @@
_LT_AC_SYS_COMPILER
@@ -952,7 +898,7 @@
#
# Check for any special shared library compilation flags.
#
-@@ -8418,7 +8519,7 @@
+@@ -8471,7 +8572,7 @@
fi
if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
@@ -961,7 +907,7 @@
else
AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
_LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-@@ -8459,7 +8560,7 @@
+@@ -8512,7 +8613,7 @@
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
@@ -970,7 +916,7 @@
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
-@@ -8468,48 +8569,11 @@
+@@ -8521,48 +8622,11 @@
fi
;;
@@ -1021,7 +967,7 @@
esac
AC_MSG_RESULT([$enable_shared])
-@@ -8534,7 +8598,7 @@
+@@ -8587,7 +8651,7 @@
AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
[AC_LANG_PUSH(C++)
AC_REQUIRE([AC_PROG_CXX])
@@ -1030,7 +976,7 @@
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-@@ -8563,7 +8627,7 @@
+@@ -8616,7 +8680,7 @@
_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
# Source file extension for C++ test sources.
@@ -1039,7 +985,7 @@
# Object file extension for compiled C++ test sources.
objext=o
-@@ -8578,6 +8642,10 @@
+@@ -8631,6 +8695,10 @@
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER
@@ -1050,7 +996,7 @@
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_LD=$LD
-@@ -8599,7 +8667,7 @@
+@@ -8652,7 +8720,7 @@
CC=${CXX-"c++"}
compiler=$CC
_LT_AC_TAGVAR(compiler, $1)=$CC
@@ -1059,7 +1005,7 @@
# We don't want -fno-exception wen compiling C++ code, so set the
# no_builtin_flag separately
-@@ -8617,8 +8685,8 @@
+@@ -8670,8 +8738,8 @@
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
if test "$with_gnu_ld" = yes; then
@@ -1070,7 +1016,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-@@ -8644,7 +8712,7 @@
+@@ -8697,7 +8765,7 @@
# linker, instead of GNU ld. If possible, this setting should
# overridden to take advantage of the native linker features on
# the platform it is being used on.
@@ -1079,7 +1025,7 @@
fi
# Commands to make compiler produce verbose output that lists
-@@ -8674,8 +8742,22 @@
+@@ -8727,8 +8795,22 @@
exp_sym_flag='-Bexport'
no_entry_flag=""
else
@@ -1104,7 +1050,7 @@
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
-@@ -8692,7 +8774,7 @@
+@@ -8745,7 +8827,7 @@
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
if test "$GXX" = yes; then
@@ -1113,7 +1059,7 @@
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
-@@ -8713,6 +8795,9 @@
+@@ -8766,6 +8848,9 @@
fi
esac
shared_flag='-shared'
@@ -1123,7 +1069,7 @@
else
# not using gcc
if test "$host_cpu" = ia64; then
-@@ -8721,15 +8806,16 @@
+@@ -8774,15 +8859,16 @@
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -1144,7 +1090,7 @@
if test "$aix_use_runtimelinking" = yes; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
-@@ -8738,13 +8824,12 @@
+@@ -8791,13 +8877,12 @@
_LT_AC_SYS_LIBPATH_AIX
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
@@ -1160,7 +1106,7 @@
else
# Determine the default libpath from the value encoded in an empty executable.
_LT_AC_SYS_LIBPATH_AIX
-@@ -8758,8 +8843,8 @@
+@@ -8811,8 +8896,8 @@
# Exported symbols can be pulled into shared objects from archives
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
@@ -1171,7 +1117,7 @@
fi
fi
;;
-@@ -8772,16 +8857,17 @@
+@@ -8825,16 +8910,17 @@
esac
;;
@@ -1191,7 +1137,7 @@
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-@@ -8790,70 +8876,81 @@
+@@ -8843,70 +8929,81 @@
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
@@ -1325,7 +1271,7 @@
# Green Hills C++ Compiler
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
-@@ -8864,14 +8961,14 @@
+@@ -8917,14 +9014,14 @@
;;
esac
;;
@@ -1342,7 +1288,7 @@
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-@@ -8888,12 +8985,12 @@
+@@ -8941,12 +9038,12 @@
# location of the library.
case $cc_basename in
@@ -1358,7 +1304,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
-@@ -8902,11 +8999,11 @@
+@@ -8955,11 +9052,11 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
@@ -1372,7 +1318,7 @@
else
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
-@@ -8916,7 +9013,7 @@
+@@ -8969,7 +9066,7 @@
;;
hpux10*|hpux11*)
if test $with_gnu_ld = no; then
@@ -1381,7 +1327,7 @@
hppa*64*)
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-@@ -8932,7 +9029,7 @@
+@@ -8985,7 +9082,7 @@
;;
esac
fi
@@ -1390,7 +1336,7 @@
hppa*64*)
_LT_AC_TAGVAR(hardcode_direct, $1)=no
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-@@ -8953,17 +9050,17 @@
+@@ -9006,17 +9103,17 @@
esac
case $cc_basename in
@@ -1412,7 +1358,7 @@
;;
esac
# Commands to make compiler produce verbose output that lists
-@@ -8979,12 +9076,12 @@
+@@ -9032,12 +9129,12 @@
*)
if test "$GXX" = yes; then
if test $with_gnu_ld = no; then
@@ -1427,7 +1373,7 @@
;;
esac
fi
-@@ -8997,9 +9094,9 @@
+@@ -9050,9 +9147,9 @@
;;
irix5* | irix6*)
case $cc_basename in
@@ -1439,7 +1385,7 @@
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
-@@ -9010,9 +9107,9 @@
+@@ -9063,9 +9160,9 @@
*)
if test "$GXX" = yes; then
if test "$with_gnu_ld" = no; then
@@ -1451,7 +1397,7 @@
fi
fi
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-@@ -9023,14 +9120,14 @@
+@@ -9076,14 +9173,14 @@
;;
linux*)
case $cc_basename in
@@ -1469,7 +1415,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
-@@ -9048,20 +9145,44 @@
+@@ -9101,20 +9198,44 @@
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
;;
@@ -1520,7 +1466,7 @@
runpath_var=LD_RUN_PATH
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-@@ -9089,7 +9210,7 @@
+@@ -9142,7 +9263,7 @@
;;
mvs*)
case $cc_basename in
@@ -1529,7 +1475,7 @@
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
-@@ -9099,7 +9220,7 @@
+@@ -9152,7 +9273,7 @@
;;
esac
;;
@@ -1538,7 +1484,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
-@@ -9110,15 +9231,31 @@
+@@ -9163,15 +9284,31 @@
# Workaround some broken pre-1.5 toolchains
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
;;
@@ -1572,7 +1518,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-@@ -9128,14 +9265,14 @@
+@@ -9181,14 +9318,14 @@
_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
;;
@@ -1590,7 +1536,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-@@ -9153,7 +9290,7 @@
+@@ -9206,7 +9343,7 @@
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
@@ -1599,7 +1545,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-@@ -9172,13 +9309,13 @@
+@@ -9225,13 +9362,13 @@
;;
osf4* | osf5*)
case $cc_basename in
@@ -1615,7 +1561,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-@@ -9187,17 +9324,17 @@
+@@ -9240,17 +9377,17 @@
# the KAI C++ compiler.
_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
;;
@@ -1637,7 +1583,7 @@
$rm $lib.exp'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-@@ -9216,7 +9353,7 @@
+@@ -9269,7 +9406,7 @@
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
@@ -1646,7 +1592,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-@@ -9240,7 +9377,7 @@
+@@ -9293,7 +9430,7 @@
sco*)
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
case $cc_basename in
@@ -1655,7 +1601,7 @@
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
-@@ -9252,12 +9389,12 @@
+@@ -9305,12 +9442,12 @@
;;
sunos4*)
case $cc_basename in
@@ -1670,7 +1616,7 @@
# Lucid
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
-@@ -9270,36 +9407,33 @@
+@@ -9323,36 +9460,33 @@
;;
solaris*)
case $cc_basename in
@@ -1719,7 +1665,7 @@
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
-@@ -9307,9 +9441,9 @@
+@@ -9360,9 +9494,9 @@
# in the archive.
_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
;;
@@ -1731,7 +1677,7 @@
# The C++ compiler must be used to create the archive.
_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-@@ -9319,9 +9453,9 @@
+@@ -9372,9 +9506,9 @@
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
if $CC --version | grep -v '^2\.7' > /dev/null; then
@@ -1743,7 +1689,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
-@@ -9330,9 +9464,9 @@
+@@ -9383,9 +9517,9 @@
else
# g++ 2.7 appears to require `-G' NOT `-shared' on this
# platform.
@@ -1755,7 +1701,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
-@@ -9350,7 +9484,7 @@
+@@ -9403,7 +9537,7 @@
;;
tandem*)
case $cc_basename in
@@ -1764,7 +1710,7 @@
# NonStop-UX NCC 3.20
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
-@@ -9460,7 +9594,7 @@
+@@ -9513,7 +9647,7 @@
# The `*' in the case matches for architectures that use `case' in
# $output_verbose_cmd can trigger glob expansion during the loop
# eval without this substitution.
@@ -1773,7 +1719,7 @@
for p in `eval $output_verbose_link_cmd`; do
case $p in
-@@ -9500,7 +9634,7 @@
+@@ -9553,7 +9687,7 @@
fi
;;
@@ -1782,7 +1728,7 @@
# This assumes that the test object file only shows up
# once in the compiler output.
if test "$p" = "conftest.$objext"; then
-@@ -9536,6 +9670,21 @@
+@@ -9589,6 +9723,21 @@
$rm -f confest.$objext
@@ -1804,7 +1750,7 @@
case " $_LT_AC_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
esac
-@@ -9586,12 +9735,16 @@
+@@ -9639,12 +9788,16 @@
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER
@@ -1822,7 +1768,7 @@
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
-@@ -9601,7 +9754,7 @@
+@@ -9654,7 +9807,7 @@
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
@@ -1831,7 +1777,7 @@
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
-@@ -9609,8 +9762,10 @@
+@@ -9662,8 +9815,10 @@
postinstall_cmds='$RANLIB $lib'
fi
;;
@@ -1844,7 +1790,7 @@
;;
esac
AC_MSG_RESULT([$enable_shared])
-@@ -9661,20 +9816,27 @@
+@@ -9714,20 +9869,27 @@
lt_simple_compile_test_code="class foo {}\n"
# Code to be used in simple link tests
@@ -1873,7 +1819,7 @@
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
-@@ -9721,11 +9883,16 @@
+@@ -9774,11 +9936,16 @@
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER
@@ -1890,7 +1836,7 @@
_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
AC_LIBTOOL_CONFIG($1)
-@@ -9751,11 +9918,12 @@
+@@ -9804,11 +9971,12 @@
# without removal of \ escapes.
if test -n "${ZSH_VERSION+set}" ; then
setopt NO_GLOB_SUBST
@@ -1905,7 +1851,7 @@
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
-@@ -9805,7 +9973,7 @@
+@@ -9858,7 +10026,7 @@
_LT_AC_TAGVAR(archive_cmds, $1) | \
_LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
_LT_AC_TAGVAR(module_cmds, $1) | \
@@ -1914,7 +1860,7 @@
_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
_LT_AC_TAGVAR(export_symbols_cmds, $1) | \
extract_expsyms_cmds | reload_cmds | finish_cmds | \
-@@ -9871,11 +10039,11 @@
+@@ -9924,11 +10092,11 @@
SED=$lt_SED
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
@@ -1928,7 +1874,7 @@
# The names of the tagged configurations supported by this script.
available_tags=
-@@ -9906,6 +10074,12 @@
+@@ -9959,6 +10127,12 @@
# The host system.
host_alias=$host_alias
host=$host
@@ -1941,7 +1887,7 @@
# An echo program that does not interpret backslashes.
echo=$lt_echo
-@@ -9936,7 +10110,7 @@
+@@ -9989,7 +10163,7 @@
NM=$lt_NM
# A symbol stripping program
@@ -1950,7 +1896,7 @@
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
-@@ -9967,7 +10141,7 @@
+@@ -10020,7 +10194,7 @@
libext="$libext"
# Shared library suffix (normally ".so").
@@ -1959,7 +1905,7 @@
# Executable file suffix (normally "").
exeext="$exeext"
-@@ -9982,7 +10156,7 @@
+@@ -10035,7 +10209,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
@@ -1968,7 +1914,7 @@
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
-@@ -10211,7 +10385,10 @@
+@@ -10264,7 +10438,10 @@
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
@@ -1980,7 +1926,7 @@
fi
])# AC_LIBTOOL_CONFIG
-@@ -10253,9 +10430,6 @@
+@@ -10306,9 +10483,6 @@
# Regexp to match symbols that can be accessed directly from C.
sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
@@ -1990,7 +1936,7 @@
# Transform an extracted symbol line into a proper C declaration
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-@@ -10277,6 +10451,13 @@
+@@ -10330,6 +10504,13 @@
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
;;
@@ -2004,7 +1950,7 @@
irix* | nonstopux*)
symcode='[[BCDEGRST]]'
;;
-@@ -10284,7 +10465,7 @@
+@@ -10337,7 +10518,7 @@
symcode='[[BCDEGQRST]]'
;;
solaris* | sysv5*)
@@ -2013,7 +1959,7 @@
;;
sysv4)
symcode='[[DFNSTU]]'
-@@ -10302,14 +10483,17 @@
+@@ -10355,14 +10536,17 @@
# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
@@ -2033,7 +1979,7 @@
# Check to see that the pipe works correctly.
pipe_works=no
-@@ -10473,7 +10657,7 @@
+@@ -10526,7 +10710,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -2042,7 +1988,7 @@
hppa*64*|ia64*)
;;
*)
-@@ -10498,18 +10682,28 @@
+@@ -10551,18 +10735,28 @@
;;
chorus*)
case $cc_basename in
@@ -2074,7 +2020,7 @@
# Green Hills C++ Compiler
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
-@@ -10517,22 +10711,22 @@
+@@ -10570,22 +10764,22 @@
;;
esac
;;
@@ -2101,7 +2047,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -10547,7 +10741,7 @@
+@@ -10600,7 +10794,7 @@
;;
irix5* | irix6* | nonstopux*)
case $cc_basename in
@@ -2110,7 +2056,7 @@
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
# CC pic flag -KPIC is the default.
-@@ -10558,18 +10752,24 @@
+@@ -10611,18 +10805,24 @@
;;
linux*)
case $cc_basename in
@@ -2139,7 +2085,7 @@
# Compaq C++
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
-@@ -10586,25 +10786,25 @@
+@@ -10639,25 +10839,25 @@
;;
mvs*)
case $cc_basename in
@@ -2170,7 +2116,7 @@
# Digital/Compaq C++
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# Make sure the PIC flag is empty. It appears that all Alpha
-@@ -10620,7 +10820,7 @@
+@@ -10673,7 +10873,7 @@
;;
sco*)
case $cc_basename in
@@ -2179,7 +2125,7 @@
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
*)
-@@ -10629,13 +10829,13 @@
+@@ -10682,13 +10882,13 @@
;;
solaris*)
case $cc_basename in
@@ -2195,7 +2141,7 @@
# Green Hills C++ Compiler
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
;;
-@@ -10645,12 +10845,12 @@
+@@ -10698,12 +10898,12 @@
;;
sunos4*)
case $cc_basename in
@@ -2210,7 +2156,7 @@
# Lucid
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
-@@ -10660,7 +10860,7 @@
+@@ -10713,7 +10913,7 @@
;;
tandem*)
case $cc_basename in
@@ -2219,7 +2165,7 @@
# NonStop-UX NCC 3.20
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
;;
-@@ -10731,7 +10931,7 @@
+@@ -10784,7 +10984,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -2228,7 +2174,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -10757,6 +10957,16 @@
+@@ -10810,6 +11010,16 @@
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
@@ -2245,7 +2191,7 @@
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
-@@ -10768,7 +10978,7 @@
+@@ -10821,7 +11031,7 @@
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -2254,7 +2200,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -10792,12 +11002,19 @@
+@@ -10845,12 +11055,19 @@
;;
linux*)
@@ -2275,7 +2221,7 @@
ccc*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# All Alpha code is PIC.
-@@ -10818,9 +11035,14 @@
+@@ -10871,9 +11088,14 @@
;;
solaris*)
@@ -2291,7 +2237,7 @@
;;
sunos4*)
-@@ -10842,6 +11064,11 @@
+@@ -10895,6 +11117,11 @@
fi
;;
@@ -2303,7 +2249,7 @@
uts4*)
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-@@ -10869,7 +11096,7 @@
+@@ -10922,7 +11149,7 @@
[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
fi
@@ -2312,7 +2258,7 @@
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-@@ -10902,7 +11129,10 @@
+@@ -10955,7 +11182,10 @@
_LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
;;
cygwin* | mingw*)
@@ -2324,7 +2270,7 @@
;;
*)
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-@@ -10928,7 +11158,7 @@
+@@ -10981,7 +11211,7 @@
_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
_LT_AC_TAGVAR(hardcode_automatic, $1)=no
_LT_AC_TAGVAR(module_cmds, $1)=
@@ -2333,7 +2279,7 @@
_LT_AC_TAGVAR(always_export_symbols, $1)=no
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
# include_expsyms should be a list of space-separated symbols to be *always*
-@@ -10945,7 +11175,8 @@
+@@ -10998,7 +11228,8 @@
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
@@ -2343,7 +2289,7 @@
case $host_os in
cygwin* | mingw* | pw32*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
-@@ -10965,6 +11196,27 @@
+@@ -11018,6 +11249,27 @@
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
@@ -2371,7 +2317,7 @@
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
-@@ -11002,7 +11254,7 @@
+@@ -11055,7 +11307,7 @@
_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
@@ -2380,7 +2326,7 @@
else
_LT_AC_TAGVAR(ld_shlibs, $1)=no
fi
-@@ -11012,13 +11264,13 @@
+@@ -11065,13 +11317,13 @@
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
@@ -2397,7 +2343,7 @@
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-@@ -11027,19 +11279,51 @@
+@@ -11080,19 +11332,51 @@
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
@@ -2454,7 +2400,7 @@
fi
;;
-@@ -11057,8 +11341,8 @@
+@@ -11110,8 +11394,8 @@
EOF
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -2465,7 +2411,7 @@
else
_LT_AC_TAGVAR(ld_shlibs, $1)=no
fi
-@@ -11073,24 +11357,19 @@
+@@ -11126,24 +11410,19 @@
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -2497,7 +2443,7 @@
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
-@@ -11124,9 +11403,20 @@
+@@ -11177,9 +11456,20 @@
else
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
fi
@@ -2520,7 +2466,7 @@
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
-@@ -11143,7 +11433,7 @@
+@@ -11196,7 +11486,7 @@
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
if test "$GCC" = yes; then
@@ -2529,7 +2475,7 @@
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
-@@ -11164,6 +11454,9 @@
+@@ -11217,6 +11507,9 @@
fi
esac
shared_flag='-shared'
@@ -2539,7 +2485,7 @@
else
# not using gcc
if test "$host_cpu" = ia64; then
-@@ -11172,29 +11465,29 @@
+@@ -11225,29 +11518,29 @@
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -2578,7 +2524,7 @@
else
# Determine the default libpath from the value encoded in an empty executable.
_LT_AC_SYS_LIBPATH_AIX
-@@ -11208,8 +11501,8 @@
+@@ -11261,8 +11554,8 @@
# Exported symbols can be pulled into shared objects from archives
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
@@ -2589,7 +2535,7 @@
fi
fi
;;
-@@ -11222,7 +11515,7 @@
+@@ -11275,7 +11568,7 @@
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
@@ -2598,7 +2544,7 @@
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
;;
-@@ -11232,69 +11525,69 @@
+@@ -11285,69 +11578,69 @@
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
@@ -2714,7 +2660,7 @@
;;
dgux*)
-@@ -11327,8 +11620,8 @@
+@@ -11380,8 +11673,8 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
@@ -2725,7 +2671,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_AC_TAGVAR(hardcode_direct, $1)=yes
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-@@ -11336,7 +11629,7 @@
+@@ -11389,7 +11682,7 @@
hpux9*)
if test "$GCC" = yes; then
@@ -2734,7 +2680,7 @@
else
_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
-@@ -11352,16 +11645,16 @@
+@@ -11405,16 +11698,16 @@
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
@@ -2755,7 +2701,7 @@
hppa*64*|ia64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
;;
-@@ -11371,7 +11664,7 @@
+@@ -11424,7 +11717,7 @@
esac
fi
if test "$with_gnu_ld" = no; then
@@ -2764,7 +2710,7 @@
hppa*64*)
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-@@ -11404,7 +11697,7 @@
+@@ -11457,7 +11750,7 @@
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
@@ -2773,7 +2719,7 @@
else
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-@@ -11414,7 +11707,7 @@
+@@ -11467,7 +11760,7 @@
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
;;
@@ -2782,7 +2728,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
-@@ -11437,7 +11730,8 @@
+@@ -11490,7 +11783,8 @@
_LT_AC_TAGVAR(hardcode_direct, $1)=yes
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
@@ -2792,7 +2738,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
else
-@@ -11447,7 +11741,7 @@
+@@ -11500,7 +11794,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
;;
*)
@@ -2801,7 +2747,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
;;
esac
-@@ -11458,14 +11752,14 @@
+@@ -11511,14 +11805,14 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
@@ -2818,7 +2764,7 @@
else
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-@@ -11477,13 +11771,13 @@
+@@ -11530,13 +11824,13 @@
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
@@ -2834,7 +2780,7 @@
# Both c and cxx compiler support -rpath directly
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-@@ -11502,10 +11796,12 @@
+@@ -11555,10 +11849,12 @@
solaris*)
_LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
if test "$GCC" = yes; then
@@ -2849,7 +2795,7 @@
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-@@ -11514,8 +11810,18 @@
+@@ -11567,8 +11863,18 @@
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
@@ -2870,7 +2816,7 @@
esac
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
;;
-@@ -11524,7 +11830,7 @@
+@@ -11577,7 +11883,7 @@
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
@@ -2879,7 +2825,7 @@
else
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
-@@ -11584,9 +11890,9 @@
+@@ -11637,9 +11943,9 @@
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
_LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
if test "$GCC" = yes; then
@@ -2891,7 +2837,7 @@
fi
runpath_var='LD_RUN_PATH'
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-@@ -11644,7 +11950,7 @@
+@@ -11697,7 +12003,7 @@
AC_MSG_CHECKING([whether -lc should be explicitly linked in])
$rm conftest*
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
@@ -2900,7 +2846,7 @@
if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
soname=conftest
lib=conftest
-@@ -11778,7 +12084,7 @@
+@@ -11831,7 +12137,7 @@
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
@@ -2980,7 +2926,7 @@
unset CDPATH
-@@ -6983,7 +7010,7 @@
+@@ -7164,7 +7191,7 @@
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
@@ -2989,7 +2935,7 @@
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-@@ -7088,7 +7115,7 @@
+@@ -7269,7 +7296,7 @@
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
@@ -2998,7 +2944,7 @@
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
-@@ -7122,7 +7149,7 @@
+@@ -7303,7 +7330,7 @@
if test "${lt_cv_prog_gnu_ld+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3007,7 +2953,7 @@
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
-@@ -7152,6 +7179,15 @@
+@@ -7333,6 +7360,15 @@
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
@@ -3023,7 +2969,7 @@
echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
-@@ -7238,44 +7274,36 @@
+@@ -7419,44 +7455,36 @@
lt_cv_deplibs_check_method=pass_all
;;
@@ -3078,7 +3024,7 @@
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
-@@ -7291,7 +7319,7 @@
+@@ -7472,7 +7500,7 @@
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
@@ -3087,7 +3033,7 @@
ia64*)
lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-@@ -7308,42 +7336,21 @@
+@@ -7489,42 +7517,21 @@
;;
irix5* | irix6* | nonstopux*)
@@ -3137,7 +3083,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
else
-@@ -7362,19 +7369,14 @@
+@@ -7543,19 +7550,14 @@
;;
openbsd*)
@@ -3159,7 +3105,7 @@
lt_cv_deplibs_check_method=pass_all
;;
-@@ -7384,7 +7386,6 @@
+@@ -7565,7 +7567,6 @@
solaris*)
lt_cv_deplibs_check_method=pass_all
@@ -3167,16 +3113,16 @@
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-@@ -7461,7 +7462,7 @@
+@@ -7642,7 +7643,7 @@
;;
*-*-irix6*)
# Find out which ABI we are using.
-- echo '#line 7464 "configure"' > conftest.$ac_ext
-+ echo '#line 7465 "configure"' > conftest.$ac_ext
+- echo '#line 7645 "configure"' > conftest.$ac_ext
++ echo '#line 7646 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
-@@ -7504,14 +7505,13 @@
+@@ -7685,14 +7686,13 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
@@ -3193,7 +3139,7 @@
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
-@@ -7523,7 +7523,6 @@
+@@ -7704,7 +7704,6 @@
esac
;;
*64-bit*)
@@ -3201,7 +3147,7 @@
case $host in
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
-@@ -8010,6 +8009,243 @@
+@@ -8191,6 +8190,243 @@
done
@@ -3445,16 +3391,16 @@
ac_ext=f
ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-@@ -8102,7 +8338,7 @@
+@@ -8283,7 +8519,7 @@
# Provide some information about the compiler.
--echo "$as_me:8105:" \
-+echo "$as_me:8341:" \
+-echo "$as_me:8286:" \
++echo "$as_me:8522:" \
"checking for Fortran 77 compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-@@ -8255,7 +8491,7 @@
+@@ -8436,7 +8672,7 @@
echo $ECHO_N "(cached) $ECHO_C" >&6
else
i=0
@@ -3463,7 +3409,7 @@
case $build_os in
msdosdjgpp*)
-@@ -8284,20 +8520,53 @@
+@@ -8465,20 +8701,53 @@
lt_cv_sys_max_cmd_len=8192;
;;
@@ -3523,7 +3469,7 @@
# Add a significant safety factor because C++ compilers can tack on massive
# amounts of additional arguments before passing them to the linker.
# It appears as though 1/2 is a usable value.
-@@ -8334,9 +8603,6 @@
+@@ -8515,9 +8784,6 @@
# Regexp to match symbols that can be accessed directly from C.
sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
@@ -3533,7 +3479,7 @@
# Transform an extracted symbol line into a proper C declaration
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-@@ -8358,6 +8624,13 @@
+@@ -8539,6 +8805,13 @@
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
;;
@@ -3547,7 +3493,7 @@
irix* | nonstopux*)
symcode='[BCDEGRST]'
;;
-@@ -8365,7 +8638,7 @@
+@@ -8546,7 +8819,7 @@
symcode='[BCDEGQRST]'
;;
solaris* | sysv5*)
@@ -3556,7 +3502,7 @@
;;
sysv4)
symcode='[DFNSTU]'
-@@ -8383,14 +8656,17 @@
+@@ -8564,14 +8837,17 @@
# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
@@ -3576,7 +3522,7 @@
# Check to see that the pipe works correctly.
pipe_works=no
-@@ -8552,7 +8828,7 @@
+@@ -8733,7 +9009,7 @@
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
@@ -3585,7 +3531,7 @@
sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
# Same as above, but do not quote variable references.
-@@ -8572,7 +8848,7 @@
+@@ -8753,7 +9029,7 @@
default_ofile=libtool
can_build_shared=yes
@@ -3594,7 +3540,7 @@
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
-@@ -8857,6 +9133,17 @@
+@@ -9038,6 +9314,17 @@
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
@@ -3612,7 +3558,7 @@
# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
-@@ -8882,7 +9169,7 @@
+@@ -9063,7 +9350,7 @@
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
@@ -3621,7 +3567,7 @@
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
-@@ -8944,7 +9231,7 @@
+@@ -9125,7 +9412,7 @@
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
@@ -3630,7 +3576,7 @@
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
-@@ -9043,6 +9330,20 @@
+@@ -9224,6 +9511,20 @@
compiler=$CC
@@ -3651,7 +3597,7 @@
#
# Check for any special shared library compilation flags.
#
-@@ -9079,11 +9380,16 @@
+@@ -9260,11 +9561,16 @@
LDFLAGS="$LDFLAGS $lt_prog_compiler_static"
printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -3669,7 +3615,7 @@
else
lt_prog_compiler_static_works=yes
fi
-@@ -9129,18 +9435,20 @@
+@@ -9310,18 +9616,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
@@ -3677,13 +3623,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:9135: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:9441: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:9316: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:9622: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
-- echo "$as_me:9139: \$? = $ac_status" >&5
-+ echo "$as_me:9445: \$? = $ac_status" >&5
+- echo "$as_me:9320: \$? = $ac_status" >&5
++ echo "$as_me:9626: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
@@ -3695,7 +3641,7 @@
lt_cv_prog_compiler_rtti_exceptions=yes
fi
fi
-@@ -9217,7 +9525,7 @@
+@@ -9398,7 +9706,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -3704,7 +3650,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -9243,6 +9551,16 @@
+@@ -9424,6 +9732,16 @@
lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
fi
;;
@@ -3721,7 +3667,7 @@
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
-@@ -9254,7 +9572,7 @@
+@@ -9435,7 +9753,7 @@
lt_prog_compiler_wl='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -3730,7 +3676,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -9278,12 +9596,19 @@
+@@ -9459,12 +9777,19 @@
;;
linux*)
@@ -3751,7 +3697,7 @@
ccc*)
lt_prog_compiler_wl='-Wl,'
# All Alpha code is PIC.
-@@ -9304,9 +9629,14 @@
+@@ -9485,9 +9810,14 @@
;;
solaris*)
@@ -3767,7 +3713,7 @@
;;
sunos4*)
-@@ -9328,6 +9658,11 @@
+@@ -9509,6 +9839,11 @@
fi
;;
@@ -3779,7 +3725,7 @@
uts4*)
lt_prog_compiler_pic='-pic'
lt_prog_compiler_static='-Bstatic'
-@@ -9362,18 +9697,20 @@
+@@ -9543,18 +9878,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
@@ -3787,13 +3733,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:9368: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:9703: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:9549: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:9884: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
-- echo "$as_me:9372: \$? = $ac_status" >&5
-+ echo "$as_me:9707: \$? = $ac_status" >&5
+- echo "$as_me:9553: \$? = $ac_status" >&5
++ echo "$as_me:9888: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
@@ -3805,7 +3751,7 @@
lt_prog_compiler_pic_works=yes
fi
fi
-@@ -9394,7 +9731,7 @@
+@@ -9575,7 +9912,7 @@
fi
fi
@@ -3814,7 +3760,7 @@
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic=
-@@ -9416,38 +9753,36 @@
+@@ -9597,38 +9934,36 @@
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
@@ -3835,13 +3781,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:9435: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:9765: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:9616: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:9946: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
-- echo "$as_me:9439: \$? = $ac_status" >&5
-+ echo "$as_me:9769: \$? = $ac_status" >&5
+- echo "$as_me:9620: \$? = $ac_status" >&5
++ echo "$as_me:9950: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -3865,7 +3811,7 @@
cd ..
rmdir conftest
$rm conftest*
-@@ -9518,6 +9853,16 @@
+@@ -9699,6 +10034,16 @@
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
@@ -3882,7 +3828,7 @@
case $host_os in
cygwin* | mingw* | pw32*)
-@@ -9538,6 +9883,27 @@
+@@ -9719,6 +10064,27 @@
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
@@ -3910,7 +3856,7 @@
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
-@@ -9575,7 +9941,7 @@
+@@ -9756,7 +10122,7 @@
allow_undefined_flag=unsupported
# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
@@ -3919,7 +3865,7 @@
else
ld_shlibs=no
fi
-@@ -9585,13 +9951,13 @@
+@@ -9766,13 +10132,13 @@
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
@@ -3936,7 +3882,7 @@
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-@@ -9600,19 +9966,51 @@
+@@ -9781,19 +10147,51 @@
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
@@ -3992,7 +3938,7 @@
fi
;;
-@@ -9630,8 +10028,8 @@
+@@ -9811,8 +10209,8 @@
EOF
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -4003,7 +3949,7 @@
else
ld_shlibs=no
fi
-@@ -9646,24 +10044,19 @@
+@@ -9827,24 +10225,19 @@
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -4035,7 +3981,7 @@
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
-@@ -9697,9 +10090,20 @@
+@@ -9878,9 +10271,20 @@
else
export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
fi
@@ -4058,7 +4004,7 @@
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
-@@ -9716,7 +10120,7 @@
+@@ -9897,7 +10301,7 @@
link_all_deplibs=yes
if test "$GCC" = yes; then
@@ -4067,7 +4013,7 @@
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
-@@ -9737,6 +10141,9 @@
+@@ -9918,6 +10322,9 @@
fi
esac
shared_flag='-shared'
@@ -4077,7 +4023,7 @@
else
# not using gcc
if test "$host_cpu" = ia64; then
-@@ -9745,21 +10152,22 @@
+@@ -9926,21 +10333,22 @@
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -4105,7 +4051,7 @@
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
-@@ -9810,14 +10218,13 @@
+@@ -9991,14 +10399,13 @@
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
@@ -4123,7 +4069,7 @@
else
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
-@@ -9881,8 +10288,8 @@
+@@ -10062,8 +10469,8 @@
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec=' '
archive_cmds_need_lc=yes
@@ -4134,7 +4080,7 @@
fi
fi
;;
-@@ -9895,7 +10302,7 @@
+@@ -10076,7 +10483,7 @@
ld_shlibs=no
;;
@@ -4143,7 +4089,7 @@
export_dynamic_flag_spec=-rdynamic
;;
-@@ -9905,13 +10312,13 @@
+@@ -10086,13 +10493,13 @@
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec=' '
@@ -4160,7 +4106,7 @@
# The linker will automatically build a .lib file if we build a DLL.
old_archive_From_new_cmds='true'
# FIXME: Should let the user specify the lib program.
-@@ -9921,52 +10328,52 @@
+@@ -10102,52 +10509,52 @@
;;
darwin* | rhapsody*)
@@ -4253,7 +4199,7 @@
fi
;;
-@@ -10000,8 +10407,8 @@
+@@ -10181,8 +10588,8 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
@@ -4264,7 +4210,7 @@
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
-@@ -10009,7 +10416,7 @@
+@@ -10190,7 +10597,7 @@
hpux9*)
if test "$GCC" = yes; then
@@ -4273,7 +4219,7 @@
else
archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
-@@ -10025,16 +10432,16 @@
+@@ -10206,16 +10613,16 @@
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
@@ -4294,7 +4240,7 @@
hppa*64*|ia64*)
archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
;;
-@@ -10044,7 +10451,7 @@
+@@ -10225,7 +10632,7 @@
esac
fi
if test "$with_gnu_ld" = no; then
@@ -4303,7 +4249,7 @@
hppa*64*)
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld='+b $libdir'
-@@ -10077,7 +10484,7 @@
+@@ -10258,7 +10665,7 @@
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
@@ -4312,7 +4258,7 @@
else
archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_ld='-rpath $libdir'
-@@ -10087,7 +10494,7 @@
+@@ -10268,7 +10675,7 @@
link_all_deplibs=yes
;;
@@ -4321,7 +4267,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
-@@ -10110,7 +10517,8 @@
+@@ -10291,7 +10698,8 @@
hardcode_direct=yes
hardcode_shlibpath_var=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
@@ -4331,7 +4277,7 @@
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
export_dynamic_flag_spec='${wl}-E'
else
-@@ -10120,7 +10528,7 @@
+@@ -10301,7 +10709,7 @@
hardcode_libdir_flag_spec='-R$libdir'
;;
*)
@@ -4340,7 +4286,7 @@
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
;;
esac
-@@ -10131,14 +10539,14 @@
+@@ -10312,14 +10720,14 @@
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
@@ -4357,7 +4303,7 @@
else
allow_undefined_flag=' -expect_unresolved \*'
archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-@@ -10150,13 +10558,13 @@
+@@ -10331,13 +10739,13 @@
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
@@ -4373,7 +4319,7 @@
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
-@@ -10175,10 +10583,12 @@
+@@ -10356,10 +10764,12 @@
solaris*)
no_undefined_flag=' -z text'
if test "$GCC" = yes; then
@@ -4388,7 +4334,7 @@
archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-@@ -10187,8 +10597,18 @@
+@@ -10368,8 +10778,18 @@
hardcode_shlibpath_var=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
@@ -4409,7 +4355,7 @@
esac
link_all_deplibs=yes
;;
-@@ -10197,7 +10617,7 @@
+@@ -10378,7 +10798,7 @@
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
@@ -4418,7 +4364,7 @@
else
archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
-@@ -10257,9 +10677,9 @@
+@@ -10438,9 +10858,9 @@
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
no_undefined_flag='${wl}-z ${wl}text'
if test "$GCC" = yes; then
@@ -4430,7 +4376,7 @@
fi
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var=no
-@@ -10365,7 +10785,7 @@
+@@ -10546,7 +10966,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -4439,7 +4385,7 @@
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
-@@ -10375,7 +10795,20 @@
+@@ -10556,7 +10976,20 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
@@ -4461,7 +4407,7 @@
need_lib_prefix=unknown
hardcode_into_libs=no
-@@ -10440,7 +10873,7 @@
+@@ -10621,7 +11054,7 @@
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
@@ -4470,7 +4416,7 @@
;;
beos*)
-@@ -10449,7 +10882,7 @@
+@@ -10630,7 +11063,7 @@
shlibpath_var=LIBRARY_PATH
;;
@@ -4479,7 +4425,7 @@
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-@@ -10465,7 +10898,7 @@
+@@ -10646,7 +11079,7 @@
cygwin* | mingw* | pw32*)
version_type=windows
@@ -4488,7 +4434,7 @@
need_version=no
need_lib_prefix=no
-@@ -10477,7 +10910,8 @@
+@@ -10658,7 +11091,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
@@ -4498,7 +4444,7 @@
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
-@@ -10507,7 +10941,7 @@
+@@ -10688,7 +11122,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -4507,7 +4453,7 @@
;;
esac
;;
-@@ -10530,7 +10964,7 @@
+@@ -10711,7 +11145,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
@@ -4516,7 +4462,7 @@
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-@@ -10553,7 +10987,7 @@
+@@ -10734,7 +11168,7 @@
dynamic_linker=no
;;
@@ -4525,7 +4471,7 @@
version_type=linux
need_lib_prefix=no
need_version=no
-@@ -10565,8 +10999,17 @@
+@@ -10746,8 +11180,17 @@
dynamic_linker='GNU ld.so'
;;
@@ -4545,7 +4491,7 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
-@@ -10584,7 +11027,7 @@
+@@ -10765,7 +11208,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
@@ -4554,7 +4500,7 @@
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
-@@ -10611,9 +11054,9 @@
+@@ -10792,9 +11235,9 @@
version_type=sunos
need_lib_prefix=no
need_version=no
@@ -4566,7 +4512,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
-@@ -10628,7 +11071,7 @@
+@@ -10809,7 +11252,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
@@ -4575,7 +4521,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-@@ -10639,7 +11082,7 @@
+@@ -10820,7 +11263,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
@@ -4584,7 +4530,7 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-@@ -10701,22 +11144,19 @@
+@@ -10882,22 +11325,19 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
@@ -4613,7 +4559,7 @@
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
-@@ -10726,6 +11166,30 @@
+@@ -10907,6 +11347,30 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -4644,7 +4590,7 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -10735,7 +11199,7 @@
+@@ -10916,7 +11380,7 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
@@ -4653,7 +4599,7 @@
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
-@@ -10764,7 +11228,11 @@
+@@ -10945,7 +11409,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
@@ -4666,7 +4612,7 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
-@@ -10784,7 +11252,7 @@
+@@ -10965,7 +11433,7 @@
os2*)
libname_spec='$name'
@@ -4675,7 +4621,7 @@
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
-@@ -10886,8 +11354,8 @@
+@@ -11067,8 +11535,8 @@
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" || \
@@ -4686,16 +4632,16 @@
# We can hardcode non-existant directories.
if test "$hardcode_direct" != no &&
-@@ -11546,7 +12014,7 @@
+@@ -11727,7 +12195,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
--#line 11549 "configure"
-+#line 12017 "configure"
+-#line 11730 "configure"
++#line 12198 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-@@ -11612,7 +12080,7 @@
+@@ -11793,7 +12261,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -4704,16 +4650,16 @@
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-@@ -11644,7 +12112,7 @@
+@@ -11825,7 +12293,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
--#line 11647 "configure"
-+#line 12115 "configure"
+-#line 11828 "configure"
++#line 12296 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-@@ -11710,7 +12178,7 @@
+@@ -11891,7 +12359,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -4722,7 +4668,7 @@
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-@@ -11760,7 +12228,7 @@
+@@ -11941,7 +12409,7 @@
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
@@ -4731,7 +4677,7 @@
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
-@@ -11769,47 +12237,10 @@
+@@ -11950,47 +12418,10 @@
fi
;;
@@ -4780,7 +4726,7 @@
;;
esac
echo "$as_me:$LINENO: result: $enable_shared" >&5
-@@ -11835,7 +12266,8 @@
+@@ -12016,7 +12447,8 @@
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
@@ -4790,7 +4736,7 @@
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
-@@ -11949,11 +12381,11 @@
+@@ -12130,11 +12562,11 @@
SED=$lt_SED
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
@@ -4804,7 +4750,7 @@
# The names of the tagged configurations supported by this script.
available_tags=
-@@ -11983,6 +12415,12 @@
+@@ -12164,6 +12596,12 @@
# The host system.
host_alias=$host_alias
host=$host
@@ -4817,7 +4763,7 @@
# An echo program that does not interpret backslashes.
echo=$lt_echo
-@@ -12013,7 +12451,7 @@
+@@ -12194,7 +12632,7 @@
NM=$lt_NM
# A symbol stripping program
@@ -4826,7 +4772,7 @@
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
-@@ -12044,7 +12482,7 @@
+@@ -12225,7 +12663,7 @@
libext="$libext"
# Shared library suffix (normally ".so").
@@ -4835,7 +4781,7 @@
# Executable file suffix (normally "").
exeext="$exeext"
-@@ -12059,7 +12497,7 @@
+@@ -12240,7 +12678,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o
@@ -4844,7 +4790,7 @@
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
-@@ -12286,7 +12724,10 @@
+@@ -12467,7 +12905,10 @@
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
@@ -4856,7 +4802,7 @@
fi
-@@ -12351,7 +12792,9 @@
+@@ -12532,7 +12973,9 @@
case $tagname in
CXX)
@@ -4867,7 +4813,7 @@
ac_ext=cc
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-@@ -12388,7 +12831,7 @@
+@@ -12569,7 +13012,7 @@
compiler_lib_search_path_CXX=
# Source file extension for C++ test sources.
@@ -4876,7 +4822,7 @@
# Object file extension for compiled C++ test sources.
objext=o
-@@ -12409,6 +12852,20 @@
+@@ -12590,6 +13033,20 @@
compiler=$CC
@@ -4897,7 +4843,7 @@
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_LD=$LD
-@@ -12430,7 +12887,16 @@
+@@ -12611,7 +13068,16 @@
CC=${CXX-"c++"}
compiler=$CC
compiler_CXX=$CC
@@ -4915,7 +4861,7 @@
# We don't want -fno-exception wen compiling C++ code, so set the
# no_builtin_flag separately
-@@ -12501,7 +12967,7 @@
+@@ -12682,7 +13148,7 @@
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
@@ -4924,7 +4870,7 @@
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
-@@ -12535,7 +13001,7 @@
+@@ -12716,7 +13182,7 @@
if test "${lt_cv_prog_gnu_ld+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -4933,7 +4879,7 @@
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
-@@ -12554,8 +13020,8 @@
+@@ -12735,8 +13201,8 @@
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
if test "$with_gnu_ld" = yes; then
@@ -4944,7 +4890,7 @@
hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-@@ -12581,7 +13047,7 @@
+@@ -12762,7 +13228,7 @@
# linker, instead of GNU ld. If possible, this setting should
# overridden to take advantage of the native linker features on
# the platform it is being used on.
@@ -4953,7 +4899,7 @@
fi
# Commands to make compiler produce verbose output that lists
-@@ -12612,8 +13078,22 @@
+@@ -12793,8 +13259,22 @@
exp_sym_flag='-Bexport'
no_entry_flag=""
else
@@ -4978,7 +4924,7 @@
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
-@@ -12630,7 +13110,7 @@
+@@ -12811,7 +13291,7 @@
link_all_deplibs_CXX=yes
if test "$GXX" = yes; then
@@ -4987,7 +4933,7 @@
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
-@@ -12651,6 +13131,9 @@
+@@ -12832,6 +13312,9 @@
fi
esac
shared_flag='-shared'
@@ -4997,7 +4943,7 @@
else
# not using gcc
if test "$host_cpu" = ia64; then
-@@ -12659,15 +13142,16 @@
+@@ -12840,15 +13323,16 @@
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -5018,7 +4964,7 @@
if test "$aix_use_runtimelinking" = yes; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
-@@ -12726,13 +13210,12 @@
+@@ -12907,13 +13391,12 @@
hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
@@ -5034,7 +4980,7 @@
else
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
-@@ -12796,8 +13279,8 @@
+@@ -12977,8 +13460,8 @@
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec_CXX=' '
archive_cmds_need_lc_CXX=yes
@@ -5045,7 +4991,7 @@
fi
fi
;;
-@@ -12810,16 +13293,17 @@
+@@ -12991,16 +13474,17 @@
esac
;;
@@ -5065,7 +5011,7 @@
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-@@ -12828,70 +13312,81 @@
+@@ -13009,70 +13493,81 @@
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
@@ -5199,7 +5145,7 @@
# Green Hills C++ Compiler
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
-@@ -12902,14 +13397,14 @@
+@@ -13083,14 +13578,14 @@
;;
esac
;;
@@ -5216,7 +5162,7 @@
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
ld_shlibs_CXX=yes
-@@ -12926,12 +13421,12 @@
+@@ -13107,12 +13602,12 @@
# location of the library.
case $cc_basename in
@@ -5232,7 +5178,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
-@@ -12940,11 +13435,11 @@
+@@ -13121,11 +13616,11 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
@@ -5246,7 +5192,7 @@
else
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
-@@ -12954,7 +13449,7 @@
+@@ -13135,7 +13630,7 @@
;;
hpux10*|hpux11*)
if test $with_gnu_ld = no; then
@@ -5255,7 +5201,7 @@
hppa*64*)
hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
-@@ -12970,7 +13465,7 @@
+@@ -13151,7 +13646,7 @@
;;
esac
fi
@@ -5264,7 +5210,7 @@
hppa*64*)
hardcode_direct_CXX=no
hardcode_shlibpath_var_CXX=no
-@@ -12991,17 +13486,17 @@
+@@ -13172,17 +13667,17 @@
esac
case $cc_basename in
@@ -5286,7 +5232,7 @@
;;
esac
# Commands to make compiler produce verbose output that lists
-@@ -13017,12 +13512,12 @@
+@@ -13198,12 +13693,12 @@
*)
if test "$GXX" = yes; then
if test $with_gnu_ld = no; then
@@ -5301,7 +5247,7 @@
;;
esac
fi
-@@ -13035,9 +13530,9 @@
+@@ -13216,9 +13711,9 @@
;;
irix5* | irix6*)
case $cc_basename in
@@ -5313,7 +5259,7 @@
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
-@@ -13048,9 +13543,9 @@
+@@ -13229,9 +13724,9 @@
*)
if test "$GXX" = yes; then
if test "$with_gnu_ld" = no; then
@@ -5325,7 +5271,7 @@
fi
fi
link_all_deplibs_CXX=yes
-@@ -13061,14 +13556,14 @@
+@@ -13242,14 +13737,14 @@
;;
linux*)
case $cc_basename in
@@ -5343,7 +5289,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
-@@ -13086,20 +13581,44 @@
+@@ -13267,20 +13762,44 @@
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
;;
@@ -5394,7 +5340,7 @@
runpath_var=LD_RUN_PATH
hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-@@ -13127,7 +13646,7 @@
+@@ -13308,7 +13827,7 @@
;;
mvs*)
case $cc_basename in
@@ -5403,7 +5349,7 @@
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
-@@ -13137,7 +13656,7 @@
+@@ -13318,7 +13837,7 @@
;;
esac
;;
@@ -5412,7 +5358,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
-@@ -13148,15 +13667,31 @@
+@@ -13329,15 +13848,31 @@
# Workaround some broken pre-1.5 toolchains
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
;;
@@ -5446,7 +5392,7 @@
hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
hardcode_libdir_separator_CXX=:
-@@ -13166,14 +13701,14 @@
+@@ -13347,14 +13882,14 @@
old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
;;
@@ -5464,7 +5410,7 @@
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_CXX=:
-@@ -13191,7 +13726,7 @@
+@@ -13372,7 +13907,7 @@
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
@@ -5473,7 +5419,7 @@
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_CXX=:
-@@ -13210,13 +13745,13 @@
+@@ -13391,13 +13926,13 @@
;;
osf4* | osf5*)
case $cc_basename in
@@ -5489,7 +5435,7 @@
hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
hardcode_libdir_separator_CXX=:
-@@ -13225,17 +13760,17 @@
+@@ -13406,17 +13941,17 @@
# the KAI C++ compiler.
old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
;;
@@ -5511,7 +5457,7 @@
$rm $lib.exp'
hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-@@ -13254,7 +13789,7 @@
+@@ -13435,7 +13970,7 @@
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
@@ -5520,7 +5466,7 @@
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_CXX=:
-@@ -13278,7 +13813,7 @@
+@@ -13459,7 +13994,7 @@
sco*)
archive_cmds_need_lc_CXX=no
case $cc_basename in
@@ -5529,7 +5475,7 @@
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
-@@ -13290,12 +13825,12 @@
+@@ -13471,12 +14006,12 @@
;;
sunos4*)
case $cc_basename in
@@ -5544,7 +5490,7 @@
# Lucid
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
-@@ -13308,36 +13843,33 @@
+@@ -13489,36 +14024,33 @@
;;
solaris*)
case $cc_basename in
@@ -5593,7 +5539,7 @@
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
-@@ -13345,9 +13877,9 @@
+@@ -13526,9 +14058,9 @@
# in the archive.
old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
;;
@@ -5605,7 +5551,7 @@
# The C++ compiler must be used to create the archive.
old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-@@ -13357,9 +13889,9 @@
+@@ -13538,9 +14070,9 @@
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
if $CC --version | grep -v '^2\.7' > /dev/null; then
@@ -5617,7 +5563,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
-@@ -13368,9 +13900,9 @@
+@@ -13549,9 +14081,9 @@
else
# g++ 2.7 appears to require `-G' NOT `-shared' on this
# platform.
@@ -5629,7 +5575,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
-@@ -13388,7 +13920,7 @@
+@@ -13569,7 +14101,7 @@
;;
tandem*)
case $cc_basename in
@@ -5638,7 +5584,7 @@
# NonStop-UX NCC 3.20
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
-@@ -13445,7 +13977,7 @@
+@@ -13626,7 +14158,7 @@
# The `*' in the case matches for architectures that use `case' in
# $output_verbose_cmd can trigger glob expansion during the loop
# eval without this substitution.
@@ -5647,7 +5593,7 @@
for p in `eval $output_verbose_link_cmd`; do
case $p in
-@@ -13485,7 +14017,7 @@
+@@ -13666,7 +14198,7 @@
fi
;;
@@ -5656,7 +5602,7 @@
# This assumes that the test object file only shows up
# once in the compiler output.
if test "$p" = "conftest.$objext"; then
-@@ -13521,6 +14053,20 @@
+@@ -13702,6 +14234,20 @@
$rm -f confest.$objext
@@ -5677,7 +5623,7 @@
case " $postdeps_CXX " in
*" -lc "*) archive_cmds_need_lc_CXX=no ;;
esac
-@@ -13576,7 +14122,7 @@
+@@ -13757,7 +14303,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -5686,7 +5632,7 @@
hppa*64*|ia64*)
;;
*)
-@@ -13601,18 +14147,28 @@
+@@ -13782,18 +14328,28 @@
;;
chorus*)
case $cc_basename in
@@ -5718,7 +5664,7 @@
# Green Hills C++ Compiler
lt_prog_compiler_pic_CXX='-pic'
;;
-@@ -13620,22 +14176,22 @@
+@@ -13801,22 +14357,22 @@
;;
esac
;;
@@ -5745,7 +5691,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -13650,7 +14206,7 @@
+@@ -13831,7 +14387,7 @@
;;
irix5* | irix6* | nonstopux*)
case $cc_basename in
@@ -5754,7 +5700,7 @@
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_static_CXX='-non_shared'
# CC pic flag -KPIC is the default.
-@@ -13661,18 +14217,24 @@
+@@ -13842,18 +14398,24 @@
;;
linux*)
case $cc_basename in
@@ -5782,7 +5728,7 @@
# Compaq C++
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
-@@ -13689,25 +14251,25 @@
+@@ -13870,25 +14432,25 @@
;;
mvs*)
case $cc_basename in
@@ -5813,7 +5759,7 @@
# Digital/Compaq C++
lt_prog_compiler_wl_CXX='-Wl,'
# Make sure the PIC flag is empty. It appears that all Alpha
-@@ -13723,7 +14285,7 @@
+@@ -13904,7 +14466,7 @@
;;
sco*)
case $cc_basename in
@@ -5822,7 +5768,7 @@
lt_prog_compiler_pic_CXX='-fPIC'
;;
*)
-@@ -13732,13 +14294,13 @@
+@@ -13913,13 +14475,13 @@
;;
solaris*)
case $cc_basename in
@@ -5838,7 +5784,7 @@
# Green Hills C++ Compiler
lt_prog_compiler_pic_CXX='-PIC'
;;
-@@ -13748,12 +14310,12 @@
+@@ -13929,12 +14491,12 @@
;;
sunos4*)
case $cc_basename in
@@ -5853,7 +5799,7 @@
# Lucid
lt_prog_compiler_pic_CXX='-pic'
;;
-@@ -13763,7 +14325,7 @@
+@@ -13944,7 +14506,7 @@
;;
tandem*)
case $cc_basename in
@@ -5862,7 +5808,7 @@
# NonStop-UX NCC 3.20
lt_prog_compiler_pic_CXX='-KPIC'
;;
-@@ -13804,18 +14366,20 @@
+@@ -13985,18 +14547,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
@@ -5870,13 +5816,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:13810: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:14372: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:13991: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:14553: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
-- echo "$as_me:13814: \$? = $ac_status" >&5
-+ echo "$as_me:14376: \$? = $ac_status" >&5
+- echo "$as_me:13995: \$? = $ac_status" >&5
++ echo "$as_me:14557: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
@@ -5888,7 +5834,7 @@
lt_prog_compiler_pic_works_CXX=yes
fi
fi
-@@ -13836,7 +14400,7 @@
+@@ -14017,7 +14581,7 @@
fi
fi
@@ -5897,7 +5843,7 @@
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic_CXX=
-@@ -13858,38 +14422,36 @@
+@@ -14039,38 +14603,36 @@
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
@@ -5918,13 +5864,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:13877: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:14434: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:14058: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:14615: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
-- echo "$as_me:13881: \$? = $ac_status" >&5
-+ echo "$as_me:14438: \$? = $ac_status" >&5
+- echo "$as_me:14062: \$? = $ac_status" >&5
++ echo "$as_me:14619: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -5948,7 +5894,7 @@
cd ..
rmdir conftest
$rm conftest*
-@@ -13939,7 +14501,10 @@
+@@ -14120,7 +14682,10 @@
export_symbols_cmds_CXX="$ltdll_cmds"
;;
cygwin* | mingw*)
@@ -5960,7 +5906,7 @@
;;
*)
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-@@ -14022,7 +14587,7 @@
+@@ -14203,7 +14768,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -5969,7 +5915,7 @@
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
-@@ -14032,7 +14597,20 @@
+@@ -14213,7 +14778,20 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
@@ -5991,7 +5937,7 @@
need_lib_prefix=unknown
hardcode_into_libs=no
-@@ -14097,7 +14675,7 @@
+@@ -14278,7 +14856,7 @@
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
@@ -6000,7 +5946,7 @@
;;
beos*)
-@@ -14106,7 +14684,7 @@
+@@ -14287,7 +14865,7 @@
shlibpath_var=LIBRARY_PATH
;;
@@ -6009,7 +5955,7 @@
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-@@ -14122,7 +14700,7 @@
+@@ -14303,7 +14881,7 @@
cygwin* | mingw* | pw32*)
version_type=windows
@@ -6018,7 +5964,7 @@
need_version=no
need_lib_prefix=no
-@@ -14134,7 +14712,8 @@
+@@ -14315,7 +14893,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
@@ -6028,7 +5974,7 @@
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
-@@ -14164,7 +14743,7 @@
+@@ -14345,7 +14924,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -6037,7 +5983,7 @@
;;
esac
;;
-@@ -14187,7 +14766,7 @@
+@@ -14368,7 +14947,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
@@ -6046,7 +5992,7 @@
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-@@ -14210,7 +14789,7 @@
+@@ -14391,7 +14970,7 @@
dynamic_linker=no
;;
@@ -6055,7 +6001,7 @@
version_type=linux
need_lib_prefix=no
need_version=no
-@@ -14222,8 +14801,17 @@
+@@ -14403,8 +14982,17 @@
dynamic_linker='GNU ld.so'
;;
@@ -6075,7 +6021,7 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
-@@ -14241,7 +14829,7 @@
+@@ -14422,7 +15010,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
@@ -6084,7 +6030,7 @@
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
-@@ -14268,9 +14856,9 @@
+@@ -14449,9 +15037,9 @@
version_type=sunos
need_lib_prefix=no
need_version=no
@@ -6096,7 +6042,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
-@@ -14285,7 +14873,7 @@
+@@ -14466,7 +15054,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
@@ -6105,7 +6051,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-@@ -14296,7 +14884,7 @@
+@@ -14477,7 +15065,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
@@ -6114,7 +6060,7 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-@@ -14358,22 +14946,19 @@
+@@ -14539,22 +15127,19 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
@@ -6143,7 +6089,7 @@
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
-@@ -14383,6 +14968,30 @@
+@@ -14564,6 +15149,30 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -6174,7 +6120,7 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -14392,7 +15001,7 @@
+@@ -14573,7 +15182,7 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
@@ -6183,7 +6129,7 @@
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
-@@ -14421,7 +15030,11 @@
+@@ -14602,7 +15211,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
@@ -6196,7 +6142,7 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
-@@ -14441,7 +15054,7 @@
+@@ -14622,7 +15235,7 @@
os2*)
libname_spec='$name'
@@ -6205,7 +6151,7 @@
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
-@@ -14543,8 +15156,8 @@
+@@ -14724,8 +15337,8 @@
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
hardcode_action_CXX=
if test -n "$hardcode_libdir_flag_spec_CXX" || \
@@ -6216,16 +6162,16 @@
# We can hardcode non-existant directories.
if test "$hardcode_direct_CXX" != no &&
-@@ -15203,7 +15816,7 @@
+@@ -15384,7 +15997,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
--#line 15206 "configure"
-+#line 15819 "configure"
+-#line 15387 "configure"
++#line 16000 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-@@ -15269,7 +15882,7 @@
+@@ -15450,7 +16063,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -6234,16 +6180,16 @@
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-@@ -15301,7 +15914,7 @@
+@@ -15482,7 +16095,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
--#line 15304 "configure"
-+#line 15917 "configure"
+-#line 15485 "configure"
++#line 16098 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-@@ -15367,7 +15980,7 @@
+@@ -15548,7 +16161,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -6252,7 +6198,7 @@
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-@@ -15418,7 +16031,8 @@
+@@ -15599,7 +16212,8 @@
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
@@ -6262,7 +6208,7 @@
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
-@@ -15518,6 +16132,12 @@
+@@ -15699,6 +16313,12 @@
# The host system.
host_alias=$host_alias
host=$host
@@ -6275,7 +6221,7 @@
# An echo program that does not interpret backslashes.
echo=$lt_echo
-@@ -15548,7 +16168,7 @@
+@@ -15729,7 +16349,7 @@
NM=$lt_NM
# A symbol stripping program
@@ -6284,7 +6230,7 @@
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
-@@ -15579,7 +16199,7 @@
+@@ -15760,7 +16380,7 @@
libext="$libext"
# Shared library suffix (normally ".so").
@@ -6293,7 +6239,7 @@
# Executable file suffix (normally "").
exeext="$exeext"
-@@ -15594,7 +16214,7 @@
+@@ -15775,7 +16395,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
@@ -6302,7 +6248,7 @@
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
-@@ -15796,7 +16416,10 @@
+@@ -15977,7 +16597,10 @@
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
@@ -6314,7 +6260,7 @@
fi
-@@ -15872,12 +16495,35 @@
+@@ -16053,12 +16676,35 @@
compiler=$CC
@@ -6351,7 +6297,7 @@
echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
-@@ -15890,7 +16536,7 @@
+@@ -16071,7 +16717,7 @@
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
@@ -6360,7 +6306,7 @@
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
-@@ -15898,8 +16544,10 @@
+@@ -16079,8 +16725,10 @@
postinstall_cmds='$RANLIB $lib'
fi
;;
@@ -6373,7 +6319,7 @@
;;
esac
echo "$as_me:$LINENO: result: $enable_shared" >&5
-@@ -15976,7 +16624,7 @@
+@@ -16157,7 +16805,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -6382,7 +6328,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -16002,6 +16650,16 @@
+@@ -16183,6 +16831,16 @@
lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
fi
;;
@@ -6399,7 +6345,7 @@
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
-@@ -16013,7 +16671,7 @@
+@@ -16194,7 +16852,7 @@
lt_prog_compiler_wl_F77='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -6408,7 +6354,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -16037,12 +16695,19 @@
+@@ -16218,12 +16876,19 @@
;;
linux*)
@@ -6429,7 +6375,7 @@
ccc*)
lt_prog_compiler_wl_F77='-Wl,'
# All Alpha code is PIC.
-@@ -16063,9 +16728,14 @@
+@@ -16244,9 +16909,14 @@
;;
solaris*)
@@ -6445,7 +6391,7 @@
;;
sunos4*)
-@@ -16087,6 +16757,11 @@
+@@ -16268,6 +16938,11 @@
fi
;;
@@ -6457,7 +6403,7 @@
uts4*)
lt_prog_compiler_pic_F77='-pic'
lt_prog_compiler_static_F77='-Bstatic'
-@@ -16121,18 +16796,20 @@
+@@ -16302,18 +16977,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
@@ -6465,13 +6411,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:16127: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:16802: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:16308: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:16983: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
-- echo "$as_me:16131: \$? = $ac_status" >&5
-+ echo "$as_me:16806: \$? = $ac_status" >&5
+- echo "$as_me:16312: \$? = $ac_status" >&5
++ echo "$as_me:16987: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
@@ -6483,7 +6429,7 @@
lt_prog_compiler_pic_works_F77=yes
fi
fi
-@@ -16153,7 +16830,7 @@
+@@ -16334,7 +17011,7 @@
fi
fi
@@ -6492,7 +6438,7 @@
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic_F77=
-@@ -16175,38 +16852,36 @@
+@@ -16356,38 +17033,36 @@
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
@@ -6513,13 +6459,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:16194: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:16864: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:16375: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:17045: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
-- echo "$as_me:16198: \$? = $ac_status" >&5
-+ echo "$as_me:16868: \$? = $ac_status" >&5
+- echo "$as_me:16379: \$? = $ac_status" >&5
++ echo "$as_me:17049: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -6543,7 +6489,7 @@
cd ..
rmdir conftest
$rm conftest*
-@@ -16277,6 +16952,16 @@
+@@ -16458,6 +17133,16 @@
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
@@ -6560,7 +6506,7 @@
case $host_os in
cygwin* | mingw* | pw32*)
-@@ -16297,6 +16982,27 @@
+@@ -16478,6 +17163,27 @@
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
@@ -6588,7 +6534,7 @@
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
-@@ -16334,7 +17040,7 @@
+@@ -16515,7 +17221,7 @@
allow_undefined_flag_F77=unsupported
# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
@@ -6597,7 +6543,7 @@
else
ld_shlibs_F77=no
fi
-@@ -16344,13 +17050,13 @@
+@@ -16525,13 +17231,13 @@
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec_F77='-L$libdir'
@@ -6614,7 +6560,7 @@
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-@@ -16359,19 +17065,51 @@
+@@ -16540,19 +17246,51 @@
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
@@ -6671,7 +6617,7 @@
fi
;;
-@@ -16389,8 +17127,8 @@
+@@ -16570,8 +17308,8 @@
EOF
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -6682,7 +6628,7 @@
else
ld_shlibs_F77=no
fi
-@@ -16405,24 +17143,19 @@
+@@ -16586,24 +17324,19 @@
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -6714,7 +6660,7 @@
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
-@@ -16456,9 +17189,20 @@
+@@ -16637,9 +17370,20 @@
else
export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
fi
@@ -6737,7 +6683,7 @@
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
-@@ -16475,7 +17219,7 @@
+@@ -16656,7 +17400,7 @@
link_all_deplibs_F77=yes
if test "$GCC" = yes; then
@@ -6746,7 +6692,7 @@
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
-@@ -16496,6 +17240,9 @@
+@@ -16677,6 +17421,9 @@
fi
esac
shared_flag='-shared'
@@ -6756,7 +6702,7 @@
else
# not using gcc
if test "$host_cpu" = ia64; then
-@@ -16504,21 +17251,22 @@
+@@ -16685,21 +17432,22 @@
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -6784,7 +6730,7 @@
program main
end
-@@ -16559,14 +17307,13 @@
+@@ -16740,14 +17488,13 @@
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
@@ -6802,7 +6748,7 @@
else
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
-@@ -16620,8 +17367,8 @@
+@@ -16801,8 +17548,8 @@
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec_F77=' '
archive_cmds_need_lc_F77=yes
@@ -6813,7 +6759,7 @@
fi
fi
;;
-@@ -16634,7 +17381,7 @@
+@@ -16815,7 +17562,7 @@
ld_shlibs_F77=no
;;
@@ -6822,7 +6768,7 @@
export_dynamic_flag_spec_F77=-rdynamic
;;
-@@ -16644,68 +17391,68 @@
+@@ -16825,68 +17572,68 @@
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec_F77=' '
@@ -6935,7 +6881,7 @@
fi
;;
-@@ -16739,8 +17486,8 @@
+@@ -16920,8 +17667,8 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
@@ -6946,7 +6892,7 @@
hardcode_libdir_flag_spec_F77='-R$libdir'
hardcode_direct_F77=yes
hardcode_shlibpath_var_F77=no
-@@ -16748,7 +17495,7 @@
+@@ -16929,7 +17676,7 @@
hpux9*)
if test "$GCC" = yes; then
@@ -6955,7 +6901,7 @@
else
archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
-@@ -16764,16 +17511,16 @@
+@@ -16945,16 +17692,16 @@
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
@@ -6976,7 +6922,7 @@
hppa*64*|ia64*)
archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
;;
-@@ -16783,7 +17530,7 @@
+@@ -16964,7 +17711,7 @@
esac
fi
if test "$with_gnu_ld" = no; then
@@ -6985,7 +6931,7 @@
hppa*64*)
hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld_F77='+b $libdir'
-@@ -16816,7 +17563,7 @@
+@@ -16997,7 +17744,7 @@
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
@@ -6994,7 +6940,7 @@
else
archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
-@@ -16826,7 +17573,7 @@
+@@ -17007,7 +17754,7 @@
link_all_deplibs_F77=yes
;;
@@ -7003,7 +6949,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
-@@ -16849,7 +17596,8 @@
+@@ -17030,7 +17777,8 @@
hardcode_direct_F77=yes
hardcode_shlibpath_var_F77=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
@@ -7013,7 +6959,7 @@
hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
export_dynamic_flag_spec_F77='${wl}-E'
else
-@@ -16859,7 +17607,7 @@
+@@ -17040,7 +17788,7 @@
hardcode_libdir_flag_spec_F77='-R$libdir'
;;
*)
@@ -7022,7 +6968,7 @@
hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
;;
esac
-@@ -16870,14 +17618,14 @@
+@@ -17051,14 +17799,14 @@
hardcode_libdir_flag_spec_F77='-L$libdir'
hardcode_minus_L_F77=yes
allow_undefined_flag_F77=unsupported
@@ -7039,7 +6985,7 @@
else
allow_undefined_flag_F77=' -expect_unresolved \*'
archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-@@ -16889,13 +17637,13 @@
+@@ -17070,13 +17818,13 @@
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
@@ -7055,7 +7001,7 @@
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec_F77='-rpath $libdir'
-@@ -16914,10 +17662,12 @@
+@@ -17095,10 +17843,12 @@
solaris*)
no_undefined_flag_F77=' -z text'
if test "$GCC" = yes; then
@@ -7070,7 +7016,7 @@
archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-@@ -16926,8 +17676,18 @@
+@@ -17107,8 +17857,18 @@
hardcode_shlibpath_var_F77=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
@@ -7091,7 +7037,7 @@
esac
link_all_deplibs_F77=yes
;;
-@@ -16936,7 +17696,7 @@
+@@ -17117,7 +17877,7 @@
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
@@ -7100,7 +7046,7 @@
else
archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
-@@ -16996,9 +17756,9 @@
+@@ -17177,9 +17937,9 @@
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
no_undefined_flag_F77='${wl}-z ${wl}text'
if test "$GCC" = yes; then
@@ -7112,7 +7058,7 @@
fi
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var_F77=no
-@@ -17104,7 +17864,7 @@
+@@ -17285,7 +18045,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -7121,7 +7067,7 @@
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
-@@ -17114,7 +17874,20 @@
+@@ -17295,7 +18055,20 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
@@ -7143,7 +7089,7 @@
need_lib_prefix=unknown
hardcode_into_libs=no
-@@ -17179,7 +17952,7 @@
+@@ -17360,7 +18133,7 @@
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
@@ -7152,7 +7098,7 @@
;;
beos*)
-@@ -17188,7 +17961,7 @@
+@@ -17369,7 +18142,7 @@
shlibpath_var=LIBRARY_PATH
;;
@@ -7161,7 +7107,7 @@
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-@@ -17204,7 +17977,7 @@
+@@ -17385,7 +18158,7 @@
cygwin* | mingw* | pw32*)
version_type=windows
@@ -7170,7 +7116,7 @@
need_version=no
need_lib_prefix=no
-@@ -17216,7 +17989,8 @@
+@@ -17397,7 +18170,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
@@ -7180,7 +7126,7 @@
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
-@@ -17246,7 +18020,7 @@
+@@ -17427,7 +18201,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -7189,7 +7135,7 @@
;;
esac
;;
-@@ -17269,7 +18043,7 @@
+@@ -17450,7 +18224,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
@@ -7198,7 +7144,7 @@
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-@@ -17292,7 +18066,7 @@
+@@ -17473,7 +18247,7 @@
dynamic_linker=no
;;
@@ -7207,7 +7153,7 @@
version_type=linux
need_lib_prefix=no
need_version=no
-@@ -17304,8 +18078,17 @@
+@@ -17485,8 +18259,17 @@
dynamic_linker='GNU ld.so'
;;
@@ -7227,7 +7173,7 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
-@@ -17323,7 +18106,7 @@
+@@ -17504,7 +18287,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
@@ -7236,7 +7182,7 @@
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
-@@ -17350,9 +18133,9 @@
+@@ -17531,9 +18314,9 @@
version_type=sunos
need_lib_prefix=no
need_version=no
@@ -7248,7 +7194,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
-@@ -17367,7 +18150,7 @@
+@@ -17548,7 +18331,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
@@ -7257,7 +7203,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-@@ -17378,7 +18161,7 @@
+@@ -17559,7 +18342,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
@@ -7266,7 +7212,7 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-@@ -17440,22 +18223,19 @@
+@@ -17621,22 +18404,19 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
@@ -7295,7 +7241,7 @@
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
-@@ -17465,6 +18245,30 @@
+@@ -17646,6 +18426,30 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -7326,7 +7272,7 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -17474,7 +18278,7 @@
+@@ -17655,7 +18459,7 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
@@ -7335,7 +7281,7 @@
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
-@@ -17503,7 +18307,11 @@
+@@ -17684,7 +18488,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
@@ -7348,7 +7294,7 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
-@@ -17523,7 +18331,7 @@
+@@ -17704,7 +18512,7 @@
os2*)
libname_spec='$name'
@@ -7357,7 +7303,7 @@
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
-@@ -17625,8 +18433,8 @@
+@@ -17806,8 +18614,8 @@
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
hardcode_action_F77=
if test -n "$hardcode_libdir_flag_spec_F77" || \
@@ -7368,7 +7314,7 @@
# We can hardcode non-existant directories.
if test "$hardcode_direct_F77" != no &&
-@@ -17702,7 +18510,8 @@
+@@ -17883,7 +18691,8 @@
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
@@ -7378,7 +7324,7 @@
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
-@@ -17802,6 +18611,12 @@
+@@ -17983,6 +18792,12 @@
# The host system.
host_alias=$host_alias
host=$host
@@ -7391,7 +7337,7 @@
# An echo program that does not interpret backslashes.
echo=$lt_echo
-@@ -17832,7 +18647,7 @@
+@@ -18013,7 +18828,7 @@
NM=$lt_NM
# A symbol stripping program
@@ -7400,7 +7346,7 @@
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
-@@ -17863,7 +18678,7 @@
+@@ -18044,7 +18859,7 @@
libext="$libext"
# Shared library suffix (normally ".so").
@@ -7409,7 +7355,7 @@
# Executable file suffix (normally "").
exeext="$exeext"
-@@ -17878,7 +18693,7 @@
+@@ -18059,7 +18874,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
@@ -7418,7 +7364,7 @@
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
-@@ -18080,7 +18895,10 @@
+@@ -18261,7 +19076,10 @@
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
@@ -7430,7 +7376,7 @@
fi
-@@ -18113,7 +18931,7 @@
+@@ -18294,7 +19112,7 @@
lt_simple_compile_test_code="class foo {}\n"
# Code to be used in simple link tests
@@ -7439,7 +7385,7 @@
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-@@ -18124,15 +18942,41 @@
+@@ -18305,15 +19123,41 @@
compiler=$CC
@@ -7481,7 +7427,7 @@
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
-@@ -18159,18 +19003,20 @@
+@@ -18340,18 +19184,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
@@ -7489,13 +7435,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:18165: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:19009: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:18346: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:19190: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
-- echo "$as_me:18169: \$? = $ac_status" >&5
-+ echo "$as_me:19013: \$? = $ac_status" >&5
+- echo "$as_me:18350: \$? = $ac_status" >&5
++ echo "$as_me:19194: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
@@ -7507,7 +7453,7 @@
lt_cv_prog_compiler_rtti_exceptions=yes
fi
fi
-@@ -18247,7 +19093,7 @@
+@@ -18428,7 +19274,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -7516,7 +7462,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -18273,6 +19119,16 @@
+@@ -18454,6 +19300,16 @@
lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
fi
;;
@@ -7533,7 +7479,7 @@
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
-@@ -18284,7 +19140,7 @@
+@@ -18465,7 +19321,7 @@
lt_prog_compiler_wl_GCJ='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -7542,7 +7488,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -18308,12 +19164,19 @@
+@@ -18489,12 +19345,19 @@
;;
linux*)
@@ -7563,7 +7509,7 @@
ccc*)
lt_prog_compiler_wl_GCJ='-Wl,'
# All Alpha code is PIC.
-@@ -18334,9 +19197,14 @@
+@@ -18515,9 +19378,14 @@
;;
solaris*)
@@ -7579,7 +7525,7 @@
;;
sunos4*)
-@@ -18358,6 +19226,11 @@
+@@ -18539,6 +19407,11 @@
fi
;;
@@ -7591,7 +7537,7 @@
uts4*)
lt_prog_compiler_pic_GCJ='-pic'
lt_prog_compiler_static_GCJ='-Bstatic'
-@@ -18392,18 +19265,20 @@
+@@ -18573,18 +19446,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
@@ -7599,13 +7545,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:18398: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:19271: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:18579: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:19452: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
-- echo "$as_me:18402: \$? = $ac_status" >&5
-+ echo "$as_me:19275: \$? = $ac_status" >&5
+- echo "$as_me:18583: \$? = $ac_status" >&5
++ echo "$as_me:19456: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
@@ -7617,7 +7563,7 @@
lt_prog_compiler_pic_works_GCJ=yes
fi
fi
-@@ -18424,7 +19299,7 @@
+@@ -18605,7 +19480,7 @@
fi
fi
@@ -7626,7 +7572,7 @@
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic_GCJ=
-@@ -18446,38 +19321,36 @@
+@@ -18627,38 +19502,36 @@
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
@@ -7647,13 +7593,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:18465: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:19333: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:18646: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:19514: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
-- echo "$as_me:18469: \$? = $ac_status" >&5
-+ echo "$as_me:19337: \$? = $ac_status" >&5
+- echo "$as_me:18650: \$? = $ac_status" >&5
++ echo "$as_me:19518: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -7677,7 +7623,7 @@
cd ..
rmdir conftest
$rm conftest*
-@@ -18548,6 +19421,16 @@
+@@ -18729,6 +19602,16 @@
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
@@ -7694,7 +7640,7 @@
case $host_os in
cygwin* | mingw* | pw32*)
-@@ -18568,6 +19451,27 @@
+@@ -18749,6 +19632,27 @@
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
@@ -7722,7 +7668,7 @@
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
-@@ -18605,7 +19509,7 @@
+@@ -18786,7 +19690,7 @@
allow_undefined_flag_GCJ=unsupported
# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
@@ -7731,7 +7677,7 @@
else
ld_shlibs_GCJ=no
fi
-@@ -18615,13 +19519,13 @@
+@@ -18796,13 +19700,13 @@
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec_GCJ='-L$libdir'
@@ -7748,7 +7694,7 @@
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-@@ -18630,19 +19534,51 @@
+@@ -18811,19 +19715,51 @@
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
@@ -7805,7 +7751,7 @@
fi
;;
-@@ -18660,8 +19596,8 @@
+@@ -18841,8 +19777,8 @@
EOF
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -7816,7 +7762,7 @@
else
ld_shlibs_GCJ=no
fi
-@@ -18676,24 +19612,19 @@
+@@ -18857,24 +19793,19 @@
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -7848,7 +7794,7 @@
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
-@@ -18727,9 +19658,20 @@
+@@ -18908,9 +19839,20 @@
else
export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
fi
@@ -7871,7 +7817,7 @@
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
-@@ -18746,7 +19688,7 @@
+@@ -18927,7 +19869,7 @@
link_all_deplibs_GCJ=yes
if test "$GCC" = yes; then
@@ -7880,7 +7826,7 @@
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
-@@ -18767,6 +19709,9 @@
+@@ -18948,6 +19890,9 @@
fi
esac
shared_flag='-shared'
@@ -7890,7 +7836,7 @@
else
# not using gcc
if test "$host_cpu" = ia64; then
-@@ -18775,21 +19720,22 @@
+@@ -18956,21 +19901,22 @@
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -7918,7 +7864,7 @@
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
-@@ -18840,14 +19786,13 @@
+@@ -19021,14 +19967,13 @@
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
@@ -7936,7 +7882,7 @@
else
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
-@@ -18911,8 +19856,8 @@
+@@ -19092,8 +20037,8 @@
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec_GCJ=' '
archive_cmds_need_lc_GCJ=yes
@@ -7947,7 +7893,7 @@
fi
fi
;;
-@@ -18925,7 +19870,7 @@
+@@ -19106,7 +20051,7 @@
ld_shlibs_GCJ=no
;;
@@ -7956,7 +7902,7 @@
export_dynamic_flag_spec_GCJ=-rdynamic
;;
-@@ -18935,68 +19880,68 @@
+@@ -19116,68 +20061,68 @@
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec_GCJ=' '
@@ -8069,7 +8015,7 @@
fi
;;
-@@ -19030,8 +19975,8 @@
+@@ -19211,8 +20156,8 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
@@ -8080,7 +8026,7 @@
hardcode_libdir_flag_spec_GCJ='-R$libdir'
hardcode_direct_GCJ=yes
hardcode_shlibpath_var_GCJ=no
-@@ -19039,7 +19984,7 @@
+@@ -19220,7 +20165,7 @@
hpux9*)
if test "$GCC" = yes; then
@@ -8089,7 +8035,7 @@
else
archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
-@@ -19055,16 +20000,16 @@
+@@ -19236,16 +20181,16 @@
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
@@ -8110,7 +8056,7 @@
hppa*64*|ia64*)
archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
;;
-@@ -19074,7 +20019,7 @@
+@@ -19255,7 +20200,7 @@
esac
fi
if test "$with_gnu_ld" = no; then
@@ -8119,7 +8065,7 @@
hppa*64*)
hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
-@@ -19107,7 +20052,7 @@
+@@ -19288,7 +20233,7 @@
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
@@ -8128,7 +8074,7 @@
else
archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
-@@ -19117,7 +20062,7 @@
+@@ -19298,7 +20243,7 @@
link_all_deplibs_GCJ=yes
;;
@@ -8137,7 +8083,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
-@@ -19140,7 +20085,8 @@
+@@ -19321,7 +20266,8 @@
hardcode_direct_GCJ=yes
hardcode_shlibpath_var_GCJ=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
@@ -8147,7 +8093,7 @@
hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
export_dynamic_flag_spec_GCJ='${wl}-E'
else
-@@ -19150,7 +20096,7 @@
+@@ -19331,7 +20277,7 @@
hardcode_libdir_flag_spec_GCJ='-R$libdir'
;;
*)
@@ -8156,7 +8102,7 @@
hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
;;
esac
-@@ -19161,14 +20107,14 @@
+@@ -19342,14 +20288,14 @@
hardcode_libdir_flag_spec_GCJ='-L$libdir'
hardcode_minus_L_GCJ=yes
allow_undefined_flag_GCJ=unsupported
@@ -8173,7 +8119,7 @@
else
allow_undefined_flag_GCJ=' -expect_unresolved \*'
archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-@@ -19180,13 +20126,13 @@
+@@ -19361,13 +20307,13 @@
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
@@ -8189,7 +8135,7 @@
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
-@@ -19205,10 +20151,12 @@
+@@ -19386,10 +20332,12 @@
solaris*)
no_undefined_flag_GCJ=' -z text'
if test "$GCC" = yes; then
@@ -8204,7 +8150,7 @@
archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-@@ -19217,8 +20165,18 @@
+@@ -19398,8 +20346,18 @@
hardcode_shlibpath_var_GCJ=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
@@ -8225,7 +8171,7 @@
esac
link_all_deplibs_GCJ=yes
;;
-@@ -19227,7 +20185,7 @@
+@@ -19408,7 +20366,7 @@
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
@@ -8234,7 +8180,7 @@
else
archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
-@@ -19287,9 +20245,9 @@
+@@ -19468,9 +20426,9 @@
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
no_undefined_flag_GCJ='${wl}-z ${wl}text'
if test "$GCC" = yes; then
@@ -8246,7 +8192,7 @@
fi
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var_GCJ=no
-@@ -19395,7 +20353,7 @@
+@@ -19576,7 +20534,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -8255,7 +8201,7 @@
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
-@@ -19405,7 +20363,20 @@
+@@ -19586,7 +20544,20 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
@@ -8277,7 +8223,7 @@
need_lib_prefix=unknown
hardcode_into_libs=no
-@@ -19470,7 +20441,7 @@
+@@ -19651,7 +20622,7 @@
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
@@ -8286,7 +8232,7 @@
;;
beos*)
-@@ -19479,7 +20450,7 @@
+@@ -19660,7 +20631,7 @@
shlibpath_var=LIBRARY_PATH
;;
@@ -8295,7 +8241,7 @@
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-@@ -19495,7 +20466,7 @@
+@@ -19676,7 +20647,7 @@
cygwin* | mingw* | pw32*)
version_type=windows
@@ -8304,7 +8250,7 @@
need_version=no
need_lib_prefix=no
-@@ -19507,7 +20478,8 @@
+@@ -19688,7 +20659,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
@@ -8314,7 +8260,7 @@
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
-@@ -19537,7 +20509,7 @@
+@@ -19718,7 +20690,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -8323,7 +8269,7 @@
;;
esac
;;
-@@ -19560,7 +20532,7 @@
+@@ -19741,7 +20713,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
@@ -8332,7 +8278,7 @@
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-@@ -19583,7 +20555,7 @@
+@@ -19764,7 +20736,7 @@
dynamic_linker=no
;;
@@ -8341,7 +8287,7 @@
version_type=linux
need_lib_prefix=no
need_version=no
-@@ -19595,8 +20567,17 @@
+@@ -19776,8 +20748,17 @@
dynamic_linker='GNU ld.so'
;;
@@ -8361,7 +8307,7 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
-@@ -19614,7 +20595,7 @@
+@@ -19795,7 +20776,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
@@ -8370,7 +8316,7 @@
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
-@@ -19641,9 +20622,9 @@
+@@ -19822,9 +20803,9 @@
version_type=sunos
need_lib_prefix=no
need_version=no
@@ -8382,7 +8328,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
-@@ -19658,7 +20639,7 @@
+@@ -19839,7 +20820,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
@@ -8391,7 +8337,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-@@ -19669,7 +20650,7 @@
+@@ -19850,7 +20831,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
@@ -8400,7 +8346,7 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-@@ -19731,22 +20712,19 @@
+@@ -19912,22 +20893,19 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
@@ -8429,7 +8375,7 @@
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
-@@ -19756,6 +20734,30 @@
+@@ -19937,6 +20915,30 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -8460,7 +8406,7 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -19765,7 +20767,7 @@
+@@ -19946,7 +20948,7 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
@@ -8469,7 +8415,7 @@
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
-@@ -19794,7 +20796,11 @@
+@@ -19975,7 +20977,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
@@ -8482,7 +8428,7 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
-@@ -19814,7 +20820,7 @@
+@@ -19995,7 +21001,7 @@
os2*)
libname_spec='$name'
@@ -8491,7 +8437,7 @@
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
-@@ -19916,8 +20922,8 @@
+@@ -20097,8 +21103,8 @@
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
hardcode_action_GCJ=
if test -n "$hardcode_libdir_flag_spec_GCJ" || \
@@ -8502,16 +8448,16 @@
# We can hardcode non-existant directories.
if test "$hardcode_direct_GCJ" != no &&
-@@ -20576,7 +21582,7 @@
+@@ -20757,7 +21763,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
--#line 20579 "configure"
-+#line 21585 "configure"
+-#line 20760 "configure"
++#line 21766 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-@@ -20642,7 +21648,7 @@
+@@ -20823,7 +21829,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -8520,16 +8466,16 @@
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-@@ -20674,7 +21680,7 @@
+@@ -20855,7 +21861,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
--#line 20677 "configure"
-+#line 21683 "configure"
+-#line 20858 "configure"
++#line 21864 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-@@ -20740,7 +21746,7 @@
+@@ -20921,7 +21927,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -8538,7 +8484,7 @@
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-@@ -20791,7 +21797,8 @@
+@@ -20972,7 +21978,8 @@
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
@@ -8548,7 +8494,7 @@
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
-@@ -20891,6 +21898,12 @@
+@@ -21072,6 +22079,12 @@
# The host system.
host_alias=$host_alias
host=$host
@@ -8561,7 +8507,7 @@
# An echo program that does not interpret backslashes.
echo=$lt_echo
-@@ -20921,7 +21934,7 @@
+@@ -21102,7 +22115,7 @@
NM=$lt_NM
# A symbol stripping program
@@ -8570,7 +8516,7 @@
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
-@@ -20952,7 +21965,7 @@
+@@ -21133,7 +22146,7 @@
libext="$libext"
# Shared library suffix (normally ".so").
@@ -8579,7 +8525,7 @@
# Executable file suffix (normally "").
exeext="$exeext"
-@@ -20967,7 +21980,7 @@
+@@ -21148,7 +22161,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
@@ -8588,7 +8534,7 @@
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
-@@ -21169,7 +22182,10 @@
+@@ -21350,7 +22363,10 @@
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
@@ -8600,7 +8546,7 @@
fi
-@@ -21212,11 +22228,35 @@
+@@ -21393,11 +22409,35 @@
compiler=$CC
@@ -8636,7 +8582,7 @@
lt_cv_prog_compiler_c_o_RC=yes
# The else clause should only fire when bootstrapping the
-@@ -21232,7 +22272,8 @@
+@@ -21413,7 +22453,8 @@
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
@@ -8646,7 +8592,7 @@
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
-@@ -21332,6 +22373,12 @@
+@@ -21513,6 +22554,12 @@
# The host system.
host_alias=$host_alias
host=$host
@@ -8659,7 +8605,7 @@
# An echo program that does not interpret backslashes.
echo=$lt_echo
-@@ -21362,7 +22409,7 @@
+@@ -21543,7 +22590,7 @@
NM=$lt_NM
# A symbol stripping program
@@ -8668,7 +8614,7 @@
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
-@@ -21393,7 +22440,7 @@
+@@ -21574,7 +22621,7 @@
libext="$libext"
# Shared library suffix (normally ".so").
@@ -8677,7 +8623,7 @@
# Executable file suffix (normally "").
exeext="$exeext"
-@@ -21408,7 +22455,7 @@
+@@ -21589,7 +22636,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
@@ -8686,7 +8632,7 @@
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
-@@ -21610,7 +22657,10 @@
+@@ -21791,7 +22838,10 @@
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
@@ -8698,7 +8644,7 @@
fi
-@@ -21657,7 +22707,7 @@
+@@ -21838,7 +22888,7 @@
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
# Always use our own libtool.
@@ -8707,7 +8653,7 @@
# Prevent multiple expansion
-@@ -22056,9 +23106,6 @@
+@@ -22237,9 +23287,6 @@
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
@@ -8717,7 +8663,7 @@
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
-@@ -22275,9 +23322,6 @@
+@@ -22456,9 +23503,6 @@
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
@@ -8727,7 +8673,7 @@
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
-@@ -24458,9 +25502,6 @@
+@@ -24639,9 +25683,6 @@
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
@@ -8737,70 +8683,70 @@
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
-@@ -29350,7 +30391,7 @@
+@@ -29531,7 +30572,7 @@
do
for j in jpeglib.h;
do
-- echo "configure: 29353: $i/$j" >&5
-+ echo "configure: 30394: $i/$j" >&5
+- echo "configure: 29534: $i/$j" >&5
++ echo "configure: 30575: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
jpeg_incdir=$i
-@@ -29648,7 +30689,7 @@
+@@ -29829,7 +30870,7 @@
do
for j in $kde_qt_header;
do
-- echo "configure: 29651: $i/$j" >&5
-+ echo "configure: 30692: $i/$j" >&5
+- echo "configure: 29832: $i/$j" >&5
++ echo "configure: 30873: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
qt_incdir=$i
-@@ -30484,7 +31525,7 @@
+@@ -30665,7 +31706,7 @@
do
for j in $kde_check_header;
do
-- echo "configure: 30487: $i/$j" >&5
-+ echo "configure: 31528: $i/$j" >&5
+- echo "configure: 30668: $i/$j" >&5
++ echo "configure: 31709: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
kde_incdir=$i
-@@ -30514,7 +31555,7 @@
+@@ -30695,7 +31736,7 @@
do
for j in $kde_check_lib;
do
-- echo "configure: 30517: $i/$j" >&5
-+ echo "configure: 31558: $i/$j" >&5
+- echo "configure: 30698: $i/$j" >&5
++ echo "configure: 31739: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
kde_libdir=$i
-@@ -30532,7 +31573,7 @@
+@@ -30713,7 +31754,7 @@
do
for j in "kde3/plugins/designer/kdewidgets.la";
do
-- echo "configure: 30535: $i/$j" >&5
-+ echo "configure: 31576: $i/$j" >&5
+- echo "configure: 30716: $i/$j" >&5
++ echo "configure: 31757: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
kde_widgetdir=$i
-@@ -32055,7 +33096,7 @@
+@@ -32236,7 +33277,7 @@
do
for j in apps/ksgmltools2/customization/kde-chunk.xsl;
do
-- echo "configure: 32058: $i/$j" >&5
-+ echo "configure: 33099: $i/$j" >&5
+- echo "configure: 32239: $i/$j" >&5
++ echo "configure: 33280: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
KDE_XSL_STYLESHEET=$i
-@@ -32239,7 +33280,7 @@
+@@ -32420,7 +33461,7 @@
do
for j in qsql.html;
do
-- echo "configure: 32242: $i/$j" >&5
-+ echo "configure: 33283: $i/$j" >&5
+- echo "configure: 32423: $i/$j" >&5
++ echo "configure: 33464: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
QTDOCDIR=$i
-@@ -33943,9 +34984,6 @@
+@@ -34124,9 +35165,6 @@
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
@@ -8810,7 +8756,7 @@
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
-@@ -34156,9 +35194,6 @@
+@@ -34337,9 +35375,6 @@
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
@@ -8820,7 +8766,7 @@
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
-@@ -34369,9 +35404,6 @@
+@@ -34550,9 +35585,6 @@
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
@@ -8830,7 +8776,7 @@
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
-@@ -34593,9 +35625,6 @@
+@@ -34774,9 +35806,6 @@
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
@@ -8840,7 +8786,7 @@
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
-@@ -35633,6 +36662,13 @@
+@@ -35818,6 +36847,13 @@
LTLIBOBJS=$ac_ltlibobjs
@@ -8854,7 +8800,7 @@
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
{ { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
-@@ -36286,6 +37322,9 @@
+@@ -36473,6 +37509,9 @@
s, at AMTAR@,$AMTAR,;t t
s, at am__tar@,$am__tar,;t t
s, at am__untar@,$am__untar,;t t
@@ -8868,407 +8814,158 @@
+++ configure.in
@@ -42,6 +42,8 @@
dnl Automake doc recommends to do this only here. (Janos)
- AM_INIT_AUTOMAKE(rsibreak-0.4.0, "3.5.0") dnl searches for some needed programs
+ AM_INIT_AUTOMAKE(rsibreak-0.5.0-rc1, "3.5.1") dnl searches for some needed programs
+AM_MAINTAINER_MODE
+
KDE_SET_PREFIX
dnl generate the config header
---- doc/Makefile.in
-+++ doc/Makefile.in
-@@ -192,6 +192,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -335,7 +338,7 @@
- all: docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -344,9 +347,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu doc/Makefile
-+#>- $(AUTOMAKE) --foreign doc/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -356,9 +359,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu doc/Makefile
-+ $(AUTOMAKE) --foreign doc/Makefile
- cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -373,9 +376,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -703,9 +706,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu doc/Makefile
-+ $(AUTOMAKE) --foreign doc/Makefile
- cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in
-
-
---- po/Makefile.in
-+++ po/Makefile.in
-@@ -192,6 +192,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -333,7 +336,7 @@
- all: docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -342,9 +345,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/Makefile
-+#>- $(AUTOMAKE) --foreign po/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -354,9 +357,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/Makefile
-+ $(AUTOMAKE) --foreign po/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -371,9 +374,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -675,9 +678,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/Makefile
-+ $(AUTOMAKE) --foreign po/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/Makefile.in
-
-
---- po/br/Makefile.in
-+++ po/br/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/br/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/br/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/br/Makefile
-+#>- $(AUTOMAKE) --foreign po/br/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/br/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/br/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/br/Makefile
-+ $(AUTOMAKE) --foreign po/br/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/br/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/br/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/br/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/br/Makefile
-+ $(AUTOMAKE) --foreign po/br/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/br/Makefile.in
-
-
+--- po/bg/rsibreak.gmo
++++ po/bg/rsibreak.gmo
+@@ -0,0 +1,55 @@
++Þ• < ü S Ü ( ( ) R
++ f q y Œ
++ “ ž
» Å
++ Ô ß ç ü - 5 F L ^ k z & „ « ±
º È Ø ë , Œ 7 ¹ – ñ ˆ ’ £ ! Ï × D ã ( ý 0 Ù .
++ { Õ „ ^ Z Ÿ ¹ T Y
# ®
! Ò
> ô
3 L e 9 ™ Ó Û K ã T / ' „ ¬
++ ¿ / Ê ú 6 ( P y
‚ ¬ ; È +
++ 0 ; S \ x > Š & É ð ÿ & ! = _ ) h $ ’ # · ö Û . Ò b E d ª ¼ Ù Q æ 8 O « i Ò + ³ þ ð ² ‡ £ ¨ + , Ô ¨ ª Ã ß õ û % ! ) '! e Q! ·! Ä! 2 3 5 7 0 # $ 8 / ' ) . ( + 1 * 6 :
++ ; 9 < ! " % & , - 4 &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter For a duration of: General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
++
++In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
++When you want to know when the next break is, hover over the icon.
++
++Use RSIBreak wisely. When it is time to break, RSIBreak can
++show a popup near the systemtray, then
++you can take a break without the screen
++being replaced by a picture. If you
++want to see pictures and not the popup,
++turn this function off. When the popup is shown, it can flash
++when there is activity detected. You
++can turn it off when you find it too
++intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: EMAIL OF TRANSLATORS
++Your emails _: NAME OF TRANSLATORS
++Your names _: This is where the user can request a break
++Take a break now _: minutes:seconds
++%1:%2 _: minutes:seconds
++%1:00 _n: One minute
++%n minutes _n: One second
++%n seconds _n: Please relax for 1 second
++Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-02-18 10:51+0100
++PO-Revision-Date: 2006-01-24 15:00+0200
++Last-Translator: Zlatko Popov <zlatkopopov at fsa-bg.org>
++Language-Team: Bulgarian <dict at linux.zonebg.com>
++MIME-Version: 1.0
++Content-Type: text/plain; charset=UTF-8
++Content-Transfer-Encoding: 8bit
++X-Generator: KBabel 1.10.2
++ &Ðвтоматично зареждане на RSIBreak при Ñтартиране &ПромÑна на прÑк път... &ПромÑна... &ЦвÑÑ‚: &Примигване при активноÑÑ‚ &Шрифт: &ПрÑк път: &Използване на изÑкачащ екран ПрекъÑване на почивка За KDE За RSIBreak Големи почивки П&отребителÑки СмÑна на изображениÑта на вÑеки: Конфигуриране на RSIBreak... БроÑч За период от: Общи Общи наÑтройки Скр&иване Път до директориÑта Ñ Ð¸Ð·Ð¾Ð±Ñ€Ð°Ð¶ÐµÐ½Ð¸Ñ Ð—Ð°ÐºÐ»ÑŽÑ‡Ð²Ð°Ð½Ðµ на екрана Logo and Icons Минимизиран Packaging and help with related issues ИзÑкачащ прозорец RSIBreak Съобщаване за грешка... Продължение на RSIBreak РекурÑивно Ñ‚ÑŠÑ€Ñене Избор на цвÑÑ‚ на броÑча. Тъй като ще Ñе поÑвÑва над изображениÑта, може би ще предпочетете цвÑÑ‚, който е видим при повечето изображениÑ. Изберете шрифт за броÑча. Изберете на прекиÑÑ‚ път за прекратÑване на почивката. Изберете Ð´Ð¸Ñ€ÐµÐºÑ‚Ð¾Ñ€Ð¸Ñ Ð¾Ñ‚ коÑто иÑкате да виждате изображениÑ. ИзображениÑта ще бъдат показвани в Ñлучаен ред по време на почивките. Ðко иÑкате, Ñ‚ÑŠÑ€Ñенето може да бъде рекурÑивно... Слайд шоу Спиране на RSIBreak СпрÑна По този начин ще можете да направите почивка ОтброÑÐ²Ð°Ð½Ð¸Ñ ÐœÐ°Ð»ÐºÐ¸ почивки Опит за предотвратÑване на хронична умора поÑредÑтвом напомнÑне на Ð¿Ð¾Ñ‚Ñ€ÐµÐ±Ð¸Ñ‚ÐµÐ»Ñ Ð´Ð° Ñи почива. Добре дошли Добре дошли в RSIBreak
++
++Ð’ лентата можете да видите чаÑовник. При щракване Ñ Ð´ÐµÑен бутон върху него Ñе поÑвÑва меню от което Ñе влиза в конфигурациÑта.
++Ðко иÑкате да знаете кога ще бъде Ñледващата почивка, задръжте мишката върху иконата.
++
++Ползвайте RSIBreak разумно. Когато Ñтане време за почивка
++RSIBreak може да покаже изÑкачащ прозорец
++до ÑиÑÑ‚ÐµÐ¼Ð½Ð¸Ñ Ð¿Ð°Ð½ÐµÐ». Тогава можете да Ñи
++починете, а екранът нÑма да бъде запълнен
++Ñ ÐºÐ°Ñ€Ñ‚Ð¸Ð½Ð°. Ðко иÑкате да виждате картини,
++а не изÑкачащ прозорец,
++изключете тази функциÑ. Когато Ñе показва изÑÐºÐ°Ñ‡Ð°Ñ‰Ð¸Ñ Ð¿Ñ€Ð¾Ð·Ð¾Ñ€ÐµÑ†,
++той може да примигва ако има активноÑÑ‚.
++Можете да го изключите, ако го намирате
++за натрапчив. ПоÑредÑтвом тази отметка указвате дали броÑчът да Ñе вижда по време на почивките. Той ще отброÑва обратно до нула, така че ще знаете продължителноÑтта на почивката. БроÑчът ще Ñтои над изображениÑта при поÑвата им. ПоÑредÑтвом тази отметка указвате, че иÑкате прозореца да изкача при отчитане на активноÑÑ‚. ПоÑредÑтвом тази отметка указвате дали по време на почивките броÑчът да Ñе вижда. Той ще отброÑва обратно до нула, така че ще знаете продължителноÑтта на почивката. ПоÑредÑтвом тази отметка указвате, че иÑкате RSIBreak да бъде Ñтартирана при Ñтартирането на KDE. iglika_gardeva at yahoo.com Иглика Гърдева Починете Ñи %1:%2 %1:00 Една минута
++%n минути Една Ñекунда
++%n Ñекунди МолÑ, починете Ñи за Ñекунда
++МолÑ, починете Ñи %n Ñекунди минути Ñекунди
+\ No newline at end of file
--- po/br/rsibreak.gmo
+++ po/br/rsibreak.gmo
-@@ -0,0 +1,15 @@
-+Þ• Ü % œ 0 1
-+ E P X
-+ _ j t ƒ ‹ “ ¤ ª
-+ ¼ Ç Ñ Ú
ã ñ û # ! ' I Q U Y ¯
Ê Ø à
ì ú ) 1 C K a i q y ! ‚ ¤ ½ 0 Å ! ö !
-+
&Change Shortcut... &Change... &Color: &Font: &Shortcut: About KDE About RSIBreak C&ustom General General Settings H&ide Image Folder Path Maintainer Maximized Minimize RSIBreak Report Bug... Slideshow Welcome _: EMAIL OF TRANSLATORS
+@@ -0,0 +1,14 @@
++Þ• Ô Œ
++ ( 0
++ 7 B L [ c k | ‚ ” ž
§ µ º Ä # Ì ! ð U " x
“ ¡ ©
µ Ã Ò æ ò ú * 2 ! ;
] k „ 0 Œ ! ½ ß è
++ &Change Shortcut... &Change... &Color: &Font: &Shortcut: About KDE About RSIBreak C&ustom General General Settings H&ide Image Folder Path Maximized RSIBreak Report Bug... Skip Slideshow Welcome _: EMAIL OF TRANSLATORS
+Your emails _: NAME OF TRANSLATORS
+Your names minutes seconds Project-Id-Version: ../../br/messages//playground-utils/rsibreak.po
-+POT-Creation-Date: 2005-12-14 08:32+0100
++POT-Creation-Date: 2006-02-18 10:51+0100
+PO-Revision-Date: 2004-09-20 15:44+0200
+Last-Translator: Thierry Vignaud <tvignaud at mandrakesoft.com>
+Language-Team: br <kde-i18n-doc at kde.org>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
-+ &Kemmañ ar berradenn ... &Kemmañ ... &Liv : &Nodrezh : &Berradenn : Diwar-benn KDE Diwar-benn RSIBreak &Diouzhoc'h Pennañ Dibarzhoù hollek K&uzhat Hent renkell skeudenn Ratreer Uhelaet Izelaat RSIBreak Reiñ da c'houzout ur gudenn ... Diskouezadur skeudennoù Degemer tvignaud at mandriva.com, jdrapier at club-internet.fr Thierry Vignaud, Jañ-Mai Drapier munutoù eilennoù
-\ Kein Zeilenumbruch am Dateiende.
---- po/da/Makefile.in
-+++ po/da/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/da/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/da/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/da/Makefile
-+#>- $(AUTOMAKE) --foreign po/da/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/da/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/da/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/da/Makefile
-+ $(AUTOMAKE) --foreign po/da/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/da/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/da/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/da/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/da/Makefile
-+ $(AUTOMAKE) --foreign po/da/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/da/Makefile.in
-
-
++ &Kemmañ ar berradenn ... &Kemmañ ... &Liv : &Nodrezh : &Berradenn : Diwar-benn KDE Diwar-benn RSIBreak &Diouzhoc'h Pennañ Dibarzhoù hollek K&uzhat Hent renkell skeudenn Uhelaet RSIBreak Reiñ da c'houzout ur gudenn ... Tremen e-biou Diskouezadur skeudennoù Degemer tvignaud at mandriva.com, jdrapier at club-internet.fr Thierry Vignaud, Jañ-Mai Drapier munutoù eilennoù
+\ No newline at end of file
--- po/da/rsibreak.gmo
+++ po/da/rsibreak.gmo
-@@ -0,0 +1,15 @@
-+Þ• ¬ < ° ±
-+ Å Ð Ø ß ç ï ÷
-+
" 0 # 8 ! \ ~ † B Ž Ñ â ì ô # ;
B P Y o y ¡ ª
-+ &Change Shortcut... &Change... &Color: &Font: C&ustom Counter General General Settings H&ide Maintainer Minimize Report Bug... Welcome _: EMAIL OF TRANSLATORS
+@@ -0,0 +1,54 @@
++Þ• < ü S Ü ( ( ) R
++ f q y Œ
++ “ ž
» Å
++ Ô ß ç ü - 5 F L ^ k z & „ « ±
º È Ø ë , Œ 7 ¹ – ñ ˆ ’ £ ! Ï × D ã ( ý 0 Ù .
++ { Õ „ ^ Z Ÿ ¹ T Y
# ®
! Ò
> ô
3 L e 9 ™ Ó Û B ã # & J [ e m ‚ œ ´ Ä Ë × ä õ
++ & 6 ? W ^ w „
++ — & ¢ É Û ä ú Ÿ ( » 5 ä w
’ ´ ( À é ï H ü E ö O ð F ‹ 7 À Ã s „ ø ` † ç û & , A ( W € ‰ 2 3 5 7 0 # $ 8 / ' ) . ( + 1 * 6 :
++ ; 9 < ! " % & , - 4 &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter For a duration of: General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
++
++In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
++When you want to know when the next break is, hover over the icon.
++
++Use RSIBreak wisely. When it is time to break, RSIBreak can
++show a popup near the systemtray, then
++you can take a break without the screen
++being replaced by a picture. If you
++want to see pictures and not the popup,
++turn this function off. When the popup is shown, it can flash
++when there is activity detected. You
++can turn it off when you find it too
++intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: EMAIL OF TRANSLATORS
+Your emails _: NAME OF TRANSLATORS
-+Your names minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2005-12-14 08:32+0100
-+PO-Revision-Date: 2005-12-12 08:16-0500
++Your names _: This is where the user can request a break
++Take a break now _: minutes:seconds
++%1:%2 _: minutes:seconds
++%1:00 _n: One minute
++%n minutes _n: One second
++%n seconds _n: Please relax for 1 second
++Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-02-18 10:51+0100
++PO-Revision-Date: 2006-01-24 21:40-0500
+Last-Translator: Erik Kjær Pedersen <erik at binghamton.edu>
+Language-Team: Danish <dansk at klid.dk>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: KBabel 1.11
-+ Æ&ndr genvej... Æ&ndr... &Farve: &Skrifttype: &Brugerdefineret Tæller Generelt Generelle indstillinger S&kjul Vedligeholder Minimér Rapportér problem... Velkommen erik at binghamton.edu Erik Kjær Pedersen minutter sekunder
-\ Kein Zeilenumbruch am Dateiende.
---- po/el/Makefile.in
-+++ po/el/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/el/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/el/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/el/Makefile
-+#>- $(AUTOMAKE) --foreign po/el/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/el/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/el/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/el/Makefile
-+ $(AUTOMAKE) --foreign po/el/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/el/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/el/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/el/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/el/Makefile
-+ $(AUTOMAKE) --foreign po/el/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/el/Makefile.in
-
-
++ Kør &automatisk RSIbreak ved start Æ&ndr genvej... Æ&ndr... &Farve: &Blink ved aktivitet &Skrifttype: &Hurtigtast: &Brug meddelelsesvindue Afbryd en pause Om KDE Om RSIbreak Lange pauser &Brugerdefineret Ændr billeder hver: Indstil RSIbreak... Tæller I så lang tid: Generelt Generelle indstillinger S&kjul Søgesti til billedmappe Lås desktop Logotype og ikoner Maksimeret Pakning og hjælp med beslægtede ting Meddelelsesvindue RSIbreak Rapportér problem... Genoptag RSIbreak Søg rekursivt Vælg farven at bruge for tælleren. Eftersom den bruges ovenpå billederne, kan du villa indstille den til en farve som er synlig med de fleste af billederne. Vælg skrifttype at bruge for tælleren. Vælg genvejstasten at bruge for at afbryde pauserne. Vælg mappen du vil se billeder fra. Billederne vises tilfældigt i pauserne. Den gennemsøges rekursivt hvis du vil... Lysbilledshow Suspendér RSIbreak Suspenderet På denne måde kan du holde en pause nu Tider Korte pauser Forsøg at forhindre belastningsskader ved at minde brugere om at hvile. Velkommen Velkommen til RSIbreak
++
++Du ser nu et ur i statusfeltet. Når du højreklikker på det ser du en menu hvor du for eksempel kan vise indstillingerne.
++Hvis du vil vide hvornår næste pause er, så hold musen over ikonen.
++
++Brug RSIbreak forstandigt. NÃ¥r det er tid til en pause kan RSIbreak vise
++et meddelelsevindue tæt ved statusfeltet,
++derefter kan du holde en pause uden at skærmen
++erstattes af et billede. Hvis du vil se billeder og
++ikke meddelelsevinduet, luk af for denne
++funktion. NÃ¥r meddelelsevinduet vises kan det
++blinke når aktivitet detekteres. Du kan
++lukke af for dette hvis du synes at det er
++for påtrængende. Du kan angive om du vil se en tæller i pauserne med dette afkrydsningsfelt. Den tæller ned til nul, så du véd hvor lang pausen vil være. Den vises ovenpå billederne, når billeder vises. Du kan angive om du ønsker at meddelelsevinduet skal blinke når aktivitet indtræffer med dette afkrydsningsfelt. Du kan angive om du vil se et meddelelsevindue når det er tid til en pause. Den tæller ned til nul, så du véd hvor lang pausen vil blive. Du kan angive at du ønsker at RSIbreak skal køres når KDE startes med dette afkrydsningsfelt. erik at binghamton.edu Erik Kjær Pedersen Hold en pause nu %1:%2 %1:00 Et minut
++%n minutter Et sekund
++%n sekunder Slap af i 1 sekund
++Slap af i %n sekunder minutter sekunder
+\ No newline at end of file
--- po/el/rsibreak.gmo
+++ po/el/rsibreak.gmo
-@@ -0,0 +1,16 @@
-+Þ• ¤ , ˆ
-+ ‰ ” œ £ « ³ » Ì
-+ Ò Ý
æ ô # ü ! B J K R ž ¯ ¼ Ù õ ! 5 G \ $ y ž ¶ Ì
-+ ì ÷
-+ &Change... &Color: &Font: C&ustom Counter General General Settings H&ide Maintainer Minimize Report Bug... Welcome _: EMAIL OF TRANSLATORS
+@@ -0,0 +1,15 @@
++Þ• ” h
++ i t | ƒ ‹ “ › ¬
² À # È ! ì K j { ˆ ¥ Á Ò ! ß $ 8 P f
++ † ‘
++ &Change... &Color: &Font: C&ustom Counter General General Settings H&ide Report Bug... Welcome _: EMAIL OF TRANSLATORS
+Your emails _: NAME OF TRANSLATORS
+Your names minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2005-12-14 08:32+0100
++POT-Creation-Date: 2006-02-18 10:51+0100
+PO-Revision-Date: 2005-10-03 13:16+0300
+Last-Translator: Spiros Georgaras <sngeorgaras at otenet.gr>
+Language-Team: Greek <i18ngr at lists.hellug.gr>
@@ -9276,94 +8973,21 @@
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: KBabel 1.10.2
-+ Αλλα&γή... &ΧÏώμα: Γ&ÏαμματοσειÏά: &Î ÏοσαÏμοσμÎνο ΜετÏητής Γενικά ΓενικÎÏ‚ Ïυθμίσεις Α&πόκÏυψη ΣυντηÏητής Ελαχιστοποίηση ΑναφοÏά σφάλματος... Καλώς ήλθατε sngeorgaras at otenet.gr ΣπÏÏος ΓεωÏγαÏάς λεπτά δευτεÏόλεπτα
-\ Kein Zeilenumbruch am Dateiende.
---- po/en_GB/Makefile.in
-+++ po/en_GB/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/en_GB/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/en_GB/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/en_GB/Makefile
-+#>- $(AUTOMAKE) --foreign po/en_GB/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/en_GB/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/en_GB/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/en_GB/Makefile
-+ $(AUTOMAKE) --foreign po/en_GB/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/en_GB/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/en_GB/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/en_GB/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/en_GB/Makefile
-+ $(AUTOMAKE) --foreign po/en_GB/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/en_GB/Makefile.in
-
-
++ Αλλα&γή... &ΧÏώμα: Γ&ÏαμματοσειÏά: &Î ÏοσαÏμοσμÎνο ΜετÏητής Γενικά ΓενικÎÏ‚ Ïυθμίσεις Α&πόκÏυψη ΑναφοÏά σφάλματος... Καλώς ήλθατε sngeorgaras at otenet.gr ΣπÏÏος ΓεωÏγαÏάς λεπτά δευτεÏόλεπτα
+\ No newline at end of file
--- po/en_GB/rsibreak.gmo
+++ po/en_GB/rsibreak.gmo
-@@ -0,0 +1,54 @@
-+Þ• ? Y p ( q š
-+ ® ¹ Á ß ò
-+ ù
! +
-+ : E W _ g t g Ü D Z b j { — © ¶
-+ Å Ð Ú & ã
-+
' 7 J , ë 7 P Z k ! u — Ÿ D « ð %
-+ ,
-+ ý 4
-+ Ù 2 { Õ ˆ ^ ^
Ÿ ½
T ] # ² ! Ö > ø 9 7 q y S ( Õ þ
-+ & D W
-+ ^ i
x †
-+ Ÿ ª ¼ Ä f Ù f @ § ½ Å Í Þ ä ú
-+ ( 3 = & F m s
| Š š ¢ , P 7 } µ ¿ Ð ! Ú ü D U % k ‘ ý ™ Ù — { q Ô í ] Â ž S ¿ , ; 5 L ‚ Š > ' * = ?
$ ! 2 ) / ; 8 ( # 6
-+ 0 + - % 7 4 , 5 1 : . 9 " & 3 < &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to minimize &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks Bother you every: C&ustom Change images every: Check this option to disable and hide the minimize button. This way you can prevent skipping the break. Check this option to disable the minimize shortcut button. This way you can prevent skipping the break. Configure RSIBreak... Counter General General Settings H&ide H&ide minimize button Image Folder Path Lock desktop Logo and Icons Maintainer Maximized Minimize Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Various contributions Waiting for the right moment to break Welcome Welcome to RSIBreak
+@@ -0,0 +1,50 @@
++Þ• 6 Ì I | ( ¡ Ê
++ Þ é ñ
++
% 3 =
++ L W _ t Š ’ š « ± Ã Ð ß & é
- = P , ñ 7 V ` q ! { ¥ D ± ö ý þ Ù ü { Ö Õ R
++ ^ ( Ÿ ‡ T ' # | ! > Â 9
;
C
S K
( Ÿ È
++ Ü ç ð
++
++
$ 2 <
++ K V ^ s ‰ ‘ ™ ª ° Â Ï Þ & è
, < ¢ O , ò 7 W a r ! | ž ¦ D ² ÷ ý ÿ Ù ý { × Ô S ] ( ž † S % y ’ ¡ 5 ² è ð ( $ / ' & 2 4 + % - 1
# 6 5 . "
++ * 3 ! , 0 ) &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
@@ -9381,7 +9005,7 @@
+Your names _: This is where the user can request a break
+Take a break now _n: Please relax for 1 second
+Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2005-12-14 08:32+0100
++POT-Creation-Date: 2006-02-18 10:51+0100
+PO-Revision-Date: 2005-12-11 22:48+0000
+Last-Translator: Malcolm Hunter <malcolm.hunter at gmx.co.uk>
+Language-Team: British English <kde-en-gb at kde.me.uk>
@@ -9389,7 +9013,7 @@
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: KBabel 1.10.2
-+ &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Colour: &Disable shortcut to minimise &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks Bother you every: C&ustom Change images every: Tick this option to disable and hide the minimise button. This way you can prevent skipping the break. Tick this option to disable the minimise shortcut button. This way you can prevent skipping the break. Configure RSIBreak... Counter General General Settings H&ide H&ide minimise button Image Folder Path Lock desktop Logo and Icons Maintainer Maximised Minimise Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the colour to use for the counter. As this is used on top of the images, you might want to set it to a colour which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Various contributions Waiting for the right moment to break Welcome Welcome to RSIBreak
++ &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Colour: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximised Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the colour to use for the counter. As this is used on top of the images, you might want to set it to a colour which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
@@ -9404,207 +9028,87 @@
+can turn it off when you find it too
+intrusive. With this tickbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this tickbox you can indicate if you want to see the popup flash when there is activity. With this tickbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this tickbox you can indicate that you want RSIBreak to start when KDE starts. malcolm.hunter at gmx.co.uk Malcolm Hunter Take a break now Please relax for 1 second
+Please relax for %n seconds minutes seconds
-\ Kein Zeilenumbruch am Dateiende.
---- po/es/Makefile.in
-+++ po/es/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/es/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/es/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/es/Makefile
-+#>- $(AUTOMAKE) --foreign po/es/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/es/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/es/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/es/Makefile
-+ $(AUTOMAKE) --foreign po/es/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/es/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/es/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/es/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/es/Makefile
-+ $(AUTOMAKE) --foreign po/es/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/es/Makefile.in
-
-
+\ No newline at end of file
--- po/es/rsibreak.gmo
+++ po/es/rsibreak.gmo
-@@ -0,0 +1,35 @@
-+Þ• 3 ´ G L h ( i ’
-+ ¦ ± ¹ ×
-+ Þ
é ÷
-+ , > F g [ g à + A I Q b h ~
-+ Ÿ ª ³
¼ Ê Ý , ~ 7 « ã ! í D # h % ~ ¤ ý ¬ Õ ª T €
-+ # Õ
-+ ! ù
-+ 9 U ] e : q . ¬ Û ö
,
-+
7
?
P
k
y
Œ
ž
½
Ì
Ú
s ò
n f Õ ì õ ý : Z
-+ l w Š Ÿ « µ 7 a G ™ á / ð - [ A . ³
-+ â ' í õ O [ p O ‹ Û ã ì . $ % 3 1 * ' - +
2
-+ ( 0 ) & # , ! " / &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to minimize &Font: &Shortcut: Abort a break About KDE About RSIBreak Big Breaks Big break after: Bother you every: C&ustom Change images every: Check this option to disable and hide the minimize button. This way you can prevent skipping the break. Check this option to disable the minimize shortcut button. This way you can prevent skipping the break. Configure RSIBreak... Counter General General Settings H&ide H&ide minimize button Image Folder Path Logo and Icons Maintainer Minimize RSIBreak Report Bug... Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Slideshow This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Various contributions Waiting for the right moment to break Welcome Welcome to RSIBreak
+@@ -0,0 +1,54 @@
++Þ• < ü S Ü ( ( ) R
++ f q y Œ
++ “ ž
» Å
++ Ô ß ç ü - 5 F L ^ k z & „ « ±
º È Ø ë , Œ 7 ¹ – ñ ˆ ’ £ ! Ï × D ã ( ý 0 Ù .
++ { Õ „ ^ Z Ÿ ¹ T Y
# ®
! Ò
> ô
3 L e 9 ™ Ó Û 8 ã . K f r z – ž ¯ Ã
Þ ì ÿ
7 N W n v – ¶ Ê
++ Ü . ç ) > Q « g 7 G K ² “ F U
++ h / s £ ° [ Ä
++ ' + S ƒ b õ æ l Ü ¦ I í ð Þ ó ( . 4 I O ` ° ¸ 2 3 5 7 0 # $ 8 / ' ) . ( + 1 * 6 :
++ ; 9 < ! " % & , - 4 &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter For a duration of: General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
+
-+Use RSIBreak wisely. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: EMAIL OF TRANSLATORS
++Use RSIBreak wisely. When it is time to break, RSIBreak can
++show a popup near the systemtray, then
++you can take a break without the screen
++being replaced by a picture. If you
++want to see pictures and not the popup,
++turn this function off. When the popup is shown, it can flash
++when there is activity detected. You
++can turn it off when you find it too
++intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: EMAIL OF TRANSLATORS
+Your emails _: NAME OF TRANSLATORS
-+Your names _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds tiny breaks Project-Id-Version: rsibreak
-+POT-Creation-Date: 2005-12-14 08:32+0100
-+PO-Revision-Date: 2005-11-21 21:24+0100
++Your names _: This is where the user can request a break
++Take a break now _: minutes:seconds
++%1:%2 _: minutes:seconds
++%1:00 _n: One minute
++%n minutes _n: One second
++%n seconds _n: Please relax for 1 second
++Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-02-18 10:51+0100
++PO-Revision-Date: 2005-12-26 00:42+0100
+Last-Translator: santi <santi at est.unileon.es>
+Language-Team: Español <kde-es at kybs.de>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
-+X-Generator: KBabel 1.10.2
-+ &Arrancar RSIBreak automáticamente al iniciar &Cambiar acceso rápido... &Cambiar... &Color: &Desactivar el acceso rápido para minimizar &Letra: Acce&so rápido: Cancelar una interrupción Acerca de KDE Acerca de RSIBreak Descansos grandes Descansos grandes después de: Molestar cada: &Personalizar Cambiar imágenes cada: Marque esta opción para desactivar y ocultar el botón minimizar. De esta forma puede evitar saltarse el descanso. Marque esta opción para desactivar el botón para minimizar. De esta forma puede evitar saltarse el descanso. Configurar RSIBreak... Contador General Preferencias generales O&cultar Ocultar el botón m&inimizar Ruta de la carpeta de imágenes Logotipo e iconos Mantenedor Minimizar RSIBreak Informar de fallo... Buscar recursivamente Seleccione el color a utilizar en el contador. Como se usa en la parte superior de las imágenes, querrá seleccionar un color visible para la mayor parte de las imágenes Seleccione el tipo de letra a utilizar con el contador. Seleccione el acceso rápido a utilizar para cancelar la interrupción. Presentaciones De esta forma se podrá tomar un descanso ahora Cronometrado Descansos pequeños Intenta evitar las lesiones por movimientos repetitivos recordando al usuario que descanse. Varias contribuciones Esperando el momento oportuno para interrumpir Bienvenido Bienvenido a RSIBreak
++X-Generator: KBabel 1.11
++ &Arrancar RSIBreak automáticamente al iniciar &Cambiar acceso rápido... &Cambiar... &Color: &Parpadear si hay actividad &Letra: Acce&so rápido: &Utilizar emergente Cancelar una interrupción Acerca de KDE Acerca de RSIBreak Descansos grandes &Personalizar Cambiar imágenes cada: Configurar RSIBreak... Contador Para una duración de: General Preferencias generales O&cultar Ruta de la carpeta de imágenes Bloquear escritorio Logotipo e iconos Maximizado Empaquetado y ayuda con los temas relacionados Emergente RSIBreak Informar de fallo... Reiniciar RSIBreak Buscar recursivamente Seleccione el color a utilizar en el contador. Como se usa en la parte superior de las imágenes, querrá seleccionar un color visible para la mayor parte de las imágenes Seleccione el tipo de letra a utilizar con el contador. Seleccione el acceso rápido a utilizar para cancelar la interrupción. Seleccione la carpeta de la que desee ver las imágenes. Estas imágenes se muestran de forma aleatoria durante el descanso. Realizará la búsqueda recursiva si asà lo desea... Presentaciones Suspender RSIBreak Suspendido De esta forma se podrá tomar un descanso ahora Cronometrado Descansos pequeños Intenta evitar las lesiones por movimientos repetitivos recordando al usuario que descanse. Bienvenido Bienvenido a RSIBreak
+
+En su bandeja del sistema puede ver un reloj. Cuando pulse con el botón derecho podrá ver un menú, desde el que podrá ir a la configuración, por ejemplo.
+Cuando quiera saber cuándo toca el siguiente descanso, sitúese sobre el icono.
+
-+Utilice RSIBreak con prudencia. Con esta casilla puede indicar si desea ver un contador durante las interrupciones. Contará hacia atrás hasta cero, de forma que sepa cuánto tiempo durará la pausa. Se mostrará en la parte superior de la imagen, cuando se muestran imágenes Con esta casilla puede indicar que desea que RSIBreak se inicie al iniciar KDE. santi at est.unileon.es Santiago Fernández Sancho Por favor, relájese durante 1 segundo
-+Por favor, relájese durante %n segundos minutos segundos descansos pequeños
-\ Kein Zeilenumbruch am Dateiende.
---- po/ga/Makefile.in
-+++ po/ga/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/ga/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/ga/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/ga/Makefile
-+#>- $(AUTOMAKE) --foreign po/ga/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/ga/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/ga/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/ga/Makefile
-+ $(AUTOMAKE) --foreign po/ga/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/ga/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/ga/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/ga/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/ga/Makefile
-+ $(AUTOMAKE) --foreign po/ga/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/ga/Makefile.in
-
-
++Utilice RSIBreak con prudencia. Cuando es tiempo de descanso, RSIBreak puede
++mostrar un mensaje emergente en la bandeja del
++sistema, de forma que pueda tomarse un descanso
++sin que la pantalla se pueda reemplazar por una imagen.
++Si desea ver imágenes y no un mensaje emergente,
++desactive esta función. Cuando se muestre el mensaje, parapadeará
++cuando se detecte actividad. Puede desactivarla
++cuando la encuentre demasiado intrusiva. Con esta casilla puede indicar si desea ver un contador durante las interrupciones. Contará hacia atrás hasta cero, de forma que sepa cuánto tiempo durará la pausa. Se mostrará en la parte superior de la imagen, cuando se muestran imágenes Con esta casilla puede indicar si desea que RSIBreak muestre un mensaje parpadeante cuando exista actividad. Con esta casilla puede indicar si desea ver un mensaje emergente durante los descansos. Comenzará a contar hasta cero, de forma que sabrá la duración del descanso. Con esta casilla puede indicar que desea que RSIBreak se inicie al iniciar KDE.Con esta casilla puede indicar que desea que RSIBreak se inicie al iniciar KDE.Con esta casilla puede indicar que desea que RSIBreak se inicie al iniciar KDE. santi at est.unileon.es Santiago Fernández Sancho Tomarse un descanso ahora %1:%2 %1:00 un minuto
++%n minutos un segundo
++%n segundos Por favor, relájese durante 1 segundo
++Por favor, relájese durante %n segundos minutos segundos
+\ No newline at end of file
--- po/ga/rsibreak.gmo
+++ po/ga/rsibreak.gmo
-@@ -0,0 +1,28 @@
+@@ -0,0 +1,27 @@
+Þ• + È É
+ Ý è ð
-+ ÷ # 9 A I Z `
-+ v ‹ ” š
£ ± Á Ô Þ # æ !
-+ , E _ y U ‰ ß ù
-+
-
@ N c o { ’ › ¹
Æ
Ô â ñ ú ) ? W * _ % Š ° @ ¶ 8 ÷ 0 :
-+ &Change Shortcut... &Change... &Color: &Font: &Shortcut: About KDE About RSIBreak C&ustom Configure RSIBreak... Counter General General Settings H&ide H&ide minimize button Maintainer Maximized Minimize Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Slideshow Welcome _: EMAIL OF TRANSLATORS
++ ÷ # 9 A I Z ` r | ‚
‹ ™ © ¼ Æ Ð # Ø ! ü 7 P j „ Œ U ” ê
++
* 8
K Y n z † ¦
Ã Ñ à é . F N * V % § @ ³ 8 ô - 7
++ &Change Shortcut... &Change... &Color: &Font: &Shortcut: About KDE About RSIBreak C&ustom Configure RSIBreak... Counter General General Settings H&ide H&ide skip button Maximized Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Slideshow Suspended Welcome _: EMAIL OF TRANSLATORS
+Your emails _: NAME OF TRANSLATORS
+Your names _: minutes:seconds
-+%1:%2 _n: one minute
-+%n minutes _n: one second
++%1:%2 _: minutes:seconds
++%1:00 _n: One minute
++%n minutes _n: One second
+%n seconds minutes seconds Project-Id-Version: playground-utils/rsibreak.po
-+POT-Creation-Date: 2005-12-14 08:32+0100
++POT-Creation-Date: 2006-02-18 10:51+0100
+PO-Revision-Date: 2005-10-01 03:02-0500
+Last-Translator: Kevin Patrick Scannell <scannell at SLU.EDU>
+Language-Team: Irish <gaeilge-gnulinux at lists.sourceforge.net>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
-+ &Athraigh an tAicearra... &Athraigh... &Dath: &Cló: &Aicearra: Maidir le KDE Maidir le RSIBreak Sain&cheaptha Cumraigh RSIBreak... Ãiritheoir Ginearálta Socruithe Ghinearálta Fola&igh Fola&igh an cnaipe laghdaithe Cothaitheoir Uaslaghdaithe Ãoslaghdaigh Preabfhuinneog RSIBreak Seol tuairisc faoi fhabht... Atosaigh RSIBreak Cuardach athchúrsach Taispeántas Sleamhnán Fáilte seoc at iolfree.ie,scannell at slu dot edu Séamus Ó Ciardhuáin,Kevin Scannell %1:%2 %n nóiméad
++ &Athraigh an tAicearra... &Athraigh... &Dath: &Cló: &Aicearra: Maidir le KDE Maidir le RSIBreak Sain&cheaptha Cumraigh RSIBreak... Ãiritheoir Ginearálta Socruithe Ghinearálta Fola&igh Fola&igh an cnaipe scipeála Uaslaghdaithe Preabfhuinneog RSIBreak Seol tuairisc faoi fhabht... Atosaigh RSIBreak Cuardach athchúrsach Taispeántas Sleamhnán Crochta Fáilte seoc at iolfree.ie,scannell at slu dot edu Séamus Ó Ciardhuáin,Kevin Scannell %1:%2 %1:00 %n nóiméad
+%n nóiméad
+%n nóiméad
+%n nóiméad
@@ -9613,90 +9117,73 @@
+%n shoicind
+%n soicind
+%n soicind nóiméad soicind
-\ Kein Zeilenumbruch am Dateiende.
---- po/it/Makefile.in
-+++ po/it/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/it/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/it/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/it/Makefile
-+#>- $(AUTOMAKE) --foreign po/it/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/it/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/it/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/it/Makefile
-+ $(AUTOMAKE) --foreign po/it/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/it/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/it/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/it/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/it/Makefile
-+ $(AUTOMAKE) --foreign po/it/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/it/Makefile.in
-
-
+\ No newline at end of file
+--- po/gl/rsibreak.gmo
++++ po/gl/rsibreak.gmo
+@@ -0,0 +1,51 @@
++Þ• ; ô O Ì ( 2
++ F Q Y l
++ s ~
› ¥
++ ´ ¿ Ç Ü ò ú
& , > K
++ Z e & o – œ
¥ ³ Ã Ö , w 7 ¤ – Ü s } Ž ! ˜ º Â D Î ) ý 1 Ù /
++ { Õ … ^ [ Ÿ º T Z
# ¯
! Ó
> õ
4 M f n O v , Æ ó
; K T e
| Š ® ½ Ò é ò û ; O
++ b
++ m . x § ± º Ï â ™ ú 4 ” . É — ø
ž
++ ± + ¼ è ï X [ r 1 z è ¬ v • Ê W × / M Ð
++ ? J Z ` f n 9
! : ( & 5 3 % + 7 , 0 8 # - / '
++ . 6 1 * ) 2 4 " $ ; &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter For a duration of: General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maintainer Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Various contributions Welcome Welcome to RSIBreak
++
++In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
++When you want to know when the next break is, hover over the icon.
++
++Use RSIBreak wisely. When it is time to break, RSIBreak can
++show a popup near the systemtray, then
++you can take a break without the screen
++being replaced by a picture. If you
++want to see pictures and not the popup,
++turn this function off. When the popup is shown, it can flash
++when there is activity detected. You
++can turn it off when you find it too
++intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: EMAIL OF TRANSLATORS
++Your emails _: NAME OF TRANSLATORS
++Your names _: This is where the user can request a break
++Take a break now _: minutes:seconds
++%1:%2 _: minutes:seconds
++%1:00 minutes seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-02-16 11:06+0100
++PO-Revision-Date: 2006-01-15 11:22+0100
++Last-Translator: mvillarino <mvillarino at users.sourceforge.net>
++Language-Team: Galician <trasno at ceu.fi.udc.es>
++MIME-Version: 1.0
++Content-Type: text/plain; charset=UTF-8
++Content-Transfer-Encoding: 8bit
++X-Generator: KBabel 1.10
++ Iniciar &automaticamente RSIBreak no inÃcio &Cambiar atallo... Modifi&car... &Cor: &Destellar se detecta actividade T&ipo de letra: A&tallo: &Usar o diálogo Interromper unha pausa Acerca de KDE Acerca de RSIBreak Descansos Longos Personali&zado Cambiar imaxes cada: Configurar RSIBreak... Contador Durante: Xeral Configurazón xeral &Agochar Rota ao Cartafol coas Imaxes Trancar Escritório Logotivo e Ãcones Mantimento Maximizado Empacotamento e axuda con asuntos relacionados Emerxente RSIBreak Comunicar un Erro... Continuar RSIBreak Procurar recursivamente Escolla aqui a cor a usar para o contador. Dado que se usa por riba de imaxes, pode querer axustá-lo a unha cor que sexa visÃbel na maioria das imaxes. Escolla aqui o tipo de letra a usar para o contador. Escolla aqui o atallo para abortar o descanso. Escolla o cartafol do cal quere ver as imaxes. Esta imaxes son mostradas aleatoriamente durante os descansos. Buscará-se recursivamente se o desexa... Apresentazón Suspender RSIBreak Suspendido Deste xeito pode tomar-se un descanso agora Tempos Descansos pequenos Tenta evitar a Lesión por Tensión Repetitiva, recordando-lle ao usuário que descanse. Várias contribuizóns Benvido Benvido a RSIBreak
++
++Na sua bandexa do sistema, poderá ver un relóxio. cando prema co botón direito do rato nel, poderá ver un menu, no cal poderá ir á configurazón, por exemplo.
++Cando queira saber cando é a próxima pausa, pase o cursor do rato sobre o Ãcone.
++
++Use RSIBreak de xeito responsábel. Cando chegue o descanso, RSIBreak pode
++mostrar un diálogo perto da bandexa do sistema,
++entón poderá tomar o descanso sen que o
++escritório sexa remprazado cunha imaxe. Se
++quer ver imaxes e non o diálogo,
++desabilite esta opzón. Cando se mostra o diálogo, pode destellar
++cando detecte actividade. Pode
++desabilitar esta opzón se a atopa
++molesta. Con esta opzón pode indicar se quere ver un contador durante os descansos. Mostrará unha conta atrás, para que saiba canto durará o descanso. Mostrará-se por riba da imaxe, cando se mostren imaxes. Con esta opzón pode indicar se quer ver o diálogo destellar cando detecte actividade. Con esta opzón pode indicar se quer ver o diálogo cando chegue o descanso. Fará unha contra atrás até cero, polo que saberá canto tempo queda de descanso. Con esta caixa pode indicar que quere que RSIBreak se arrinque xunto con KDE. mvillarino at users.sourceforge.net mvillarino Descansar agora %1:%2 %1:00 minutos segundos
+\ No newline at end of file
--- po/it/rsibreak.gmo
+++ po/it/rsibreak.gmo
-@@ -0,0 +1,61 @@
-+Þ• L | e Ü p ( q š
-+ ® ¹ Á ß ò
-+ ù
! +
-+ : E V h p g … g í U k s † Ž Ÿ ¥ » Í Ú
-+ é ô þ & ! H N W
w … • ¨ , I
-+ 7 v
-+ – ®
-+ E O ` ! j Œ ” D å % û ! ý ) Ù '
{ Õ } ^ S Ÿ ² T R I § # ñ [ ! q > “ Ò ë 8 9 = w ‘ « ³ » J Ç ) <
-+ S ^ % g " °
¼ Ê
ã ñ + = L \ z r t í b x ‚ • ž ´ ¾ Û ö
-+ * $ 4 ' Y “ œ ¼ Î â § ÷ 5 Ÿ > Õ ¨ ½ Ð â % ê t " — - § Õ b ß ô B 7 È o Í Ï = S
a o ‡ š © ¾ Ä H Ê D ! X! l! ‚! ‰! ‘! B I ( & D ? 2 A E @ L - 1 < ; 9 H / *
-+ # G + 0 J C > ' 6 . 7 3
8 5 $ = ! % 4 K " , : ) F &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to minimize &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks Big break after: Bother you every: C&ustom Change images every: Check this option to disable and hide the minimize button. This way you can prevent skipping the break. Check this option to disable the minimize shortcut button. This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide minimize button Image Folder Path Lock desktop Logo and Icons Maintainer Maximized Minimize Next break is a big break Packaging and help with related issues Popup RSIBreak RSIBreak is currently suspended Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Various contributions Waiting for the right moment to break Welcome Welcome to RSIBreak
+@@ -0,0 +1,54 @@
++Þ• < ü S Ü ( ( ) R
++ f q y Œ
++ “ ž
» Å
++ Ô ß ç ü - 5 F L ^ k z & „ « ±
º È Ø ë , Œ 7 ¹ – ñ ˆ ’ £ ! Ï × D ã ( ý 0 Ù .
++ { Õ „ ^ Z Ÿ ¹ T Y
# ®
! Ò
> ô
3 L e 9 ™ Ó Û J ã ) . X
++ o z " ƒ ¦
² À
Ù ç û ! 1 G ] g z ƒ ™ £ ¾ Í
++ Ú ' å
( : N § c 5 > A ¨ € ) < N % V | ‚ t Ž b
ô p e ö o û Ï k S ; § ¶ Ë Ñ × ë D F M 2 3 5 7 0 # $ 8 / ' ) . ( + 1 * 6 :
++ ; 9 < ! " % & , - 4 &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter For a duration of: General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
@@ -9709,27 +9196,24 @@
+turn this function off. When the popup is shown, it can flash
+when there is activity detected. You
+can turn it off when you find it too
-+intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining _: EMAIL OF TRANSLATORS
-+Your emails _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining _: NAME OF TRANSLATORS
++intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: EMAIL OF TRANSLATORS
++Your emails _: NAME OF TRANSLATORS
+Your names _: This is where the user can request a break
+Take a break now _: minutes:seconds
+%1:%2 _: minutes:seconds
-+%1:00 _n: Big break after next break
-+Big break after %n breaks _n: Please relax for 1 second
-+Please relax for %n seconds _n: one minute
-+%n minutes _n: one second
-+%n seconds minutes seconds tiny breaks Project-Id-Version: rsibreak
-+POT-Creation-Date: 2005-12-14 08:32+0100
-+PO-Revision-Date: 2005-12-13 20:31+0100
++%1:00 _n: One minute
++%n minutes _n: One second
++%n seconds _n: Please relax for 1 second
++Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-02-18 10:51+0100
++PO-Revision-Date: 2005-12-28 14:18+0100
+Last-Translator: Nicola Ruggero <nixprog.adsl at tiscali.it>
+Language-Team: Italian <kde-i18n-it at kde.org>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: KBabel 1.10.2
-+ Avvia &automaticamente RSIBreak all'avvio &Cambia scorciatoia... &Cambia... &Colore: &Disabilita scorciatoia per minimizza &Lampeggia quando rileva attività &Carattere: &Scorciatoia: &Usa l'avviso a comparsa Annulla pausa Informazioni su KDE Informazioni su RSIBreak Pause lunghe Pausa lunga dopo: Annoiami ogni: Pe&rsonalizzato Cambia immagini ogni: Marca questa opzione per disabilitare e nascondere il pulsante minimizza. In questo modo puoi evitare di saltare le pause. Marca questa opzione per disabilitare la scorciatoia per minimizza. In questo modo puoi evitare di saltare le pause. Configura RSIBreak... Contatore Per una durata di: Generale Impostazioni generali Nascond&i Nascond&i pulsante minimizza Percorso cartella immagine Blocca desktop Logo e icone Responsabile Massimizza Minimizza La prossima pausa è una pausa lunga Creazione pacchetti e relativi problemi Avviso a comparsa RSIBreak RSIBreak è attualmente sospeso Segnala un bug... Ripristina RSIBreak Cerca ricorsivamente Seleziona qui il colore da usare per il contatore. Dato che è utilizzato sopra alle immagini, seleziona un colore che sia visibile nella maggior parte delle immagini. Seleziona qui il carattere da usare per il contatore. Seleziona qui la scorciatoia da usare per annullare una pausa. Seleziona la cartella dalla quale vuoi vedere le immagini. Queste immagini sono mostrate casualmente durante le pause. Se vuoi, puoi effettuare una ricerca ricorsiva... Mostra diapositive Sospendi RSIBreak Sospeso Con questo puoi fare una pausa adesso Tempi Pause brevi Prova a prevenire la sindrome da sforzo ripetuto (Repetitive Strain Injury) ricordando all'utente di fare una pausa. Contributi vari Sto aspettando il momento giusto per la pausa Benvenuto Benvenuto in RSIBreak
++ Avvia &automaticamente RSIBreak all'avvio &Cambia scorciatoia... &Cambia... &Colore: &Lampeggia quando rileva attività &Carattere: &Scorciatoia: &Usa l'avviso a comparsa Annulla pausa Informazioni su KDE Informazioni su RSIBreak Pause lunghe Pe&rsonalizzato Cambia immagini ogni: Configura RSIBreak... Contatore Per una durata di: Generale Impostazioni generali Nascond&i Percorso cartella immagine Blocca desktop Logo e icone Massimizza Creazione pacchetti e relativi problemi Avviso a comparsa RSIBreak Segnala un bug... Ripristina RSIBreak Cerca ricorsivamente Seleziona qui il colore da usare per il contatore. Dato che è utilizzato sopra alle immagini, seleziona un colore che sia visibile nella maggior parte delle immagini. Seleziona qui il carattere da usare per il contatore. Seleziona qui la scorciatoia da usare per annullare una pausa. Seleziona la cartella dalla quale vuoi vedere le immagini. Queste immagini sono mostrate casualmente durante le pause. Se vuoi, puoi effettuare una ricerca ricorsiva... Mostra diapositive Sospendi RSIBreak Sospeso Con questo puoi fare una pausa adesso Tempi Pause brevi Prova a prevenire la sindrome da sforzo ripetuto (Repetitive Strain Injury) ricordando all'utente di fare una pausa. Benvenuto Benvenuto in RSIBreak
+
+Nel vassoio di sistema puoi vedere che è apparso un orologio. Quando fai clic con il pulsante destro sopra di esso ti comparirà un menu dal quale, ad esempio, puoi andare nella finestra di configurazione.
+Per sapere quando avverrà la prossima pausa resta fermo con il cursore del mouse sopra l'icona.
@@ -9742,95 +9226,22 @@
+disabilita questa funzione. L'avviso può lampeggiare se viene rilevata
+dell'attività quando viene mostrato. Puoi
+disattivare quest'opzione se la ritieni troppo
-+invadente. Con questa casellina puoi decidere se vuoi vedere un contatore durante le pause. Questo contatore fa un conto alla rovescia fino a zero per indicarti quanto lunga è la pausa. Quando vengono mostrate le immagini il contatore verrà mostrato sopra all'immagine. Con questa casellina puoi decidere se vuoi vedere l'avviso a comparsa lampeggiare quando rileva dell'attività . Con questa casellina puoi decidere se vuoi vedere l'avviso a comparsa quando è ora di fare una pausa. Verrà mostrato anche un conto alla rovescia fino a zero, così puoi sapere quanto sarà lunga la pausa. Con questa casellina puoi decidere che RSIBreak venga eseguito quando si avvia KDE. %1 al termine nixprog.adsl at tiscali.it %1 e %2 al termine Nicola Ruggero Fai una pausa adesso %1:%2 %1:00 Pausa lunga dopo la prossima pausa
-+Pausa lunga dopo le prossime %n pause Per favore riposati per 1 secondo
-+Per favore riposati per %n secondi un minuto
-+%n minuti un secondo
-+%n secondi minuti secondi pause brevi
-\ Kein Zeilenumbruch am Dateiende.
---- po/nl/Makefile.in
-+++ po/nl/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/nl/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/nl/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/nl/Makefile
-+#>- $(AUTOMAKE) --foreign po/nl/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/nl/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/nl/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/nl/Makefile
-+ $(AUTOMAKE) --foreign po/nl/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/nl/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/nl/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/nl/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/nl/Makefile
-+ $(AUTOMAKE) --foreign po/nl/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/nl/Makefile.in
-
-
++invadente. Con questa casellina puoi decidere se vuoi vedere un contatore durante le pause. Questo contatore fa un conto alla rovescia fino a zero per indicarti quanto lunga è la pausa. Quando vengono mostrate le immagini il contatore verrà mostrato sopra all'immagine. Con questa casellina puoi decidere se vuoi vedere l'avviso a comparsa lampeggiare quando rileva dell'attività . Con questa casellina puoi decidere se vuoi vedere l'avviso a comparsa quando è ora di fare una pausa. Verrà mostrato anche un conto alla rovescia fino a zero, così puoi sapere quanto sarà lunga la pausa. Con questa casellina puoi decidere che RSIBreak venga eseguito quando si avvia KDE. nixprog.adsl at tiscali.it Nicola Ruggero Fai una pausa adesso %1:%2 %1:00 Un minuto
++%n minuti Un secondo
++%n secondi Per favore riposati per 1 secondo
++Per favore riposati per %n secondi minuti secondi
+\ No newline at end of file
--- po/nl/rsibreak.gmo
+++ po/nl/rsibreak.gmo
-@@ -0,0 +1,65 @@
-+Þ• L | e Ü p ( q š
-+ ® ¹ Á ß ò
-+ ù
! +
-+ : E V h p g … g í U k s † Ž Ÿ ¥ » Í Ú
-+ é ô þ & ! H N W
w … • ¨ , I
-+ 7 v
-+ – ®
-+ E O ` ! j Œ ” D å % û ! ý ) Ù '
{ Õ } ^ S Ÿ ² T R I § # ñ [ ! q > “ Ò ë 8 9 = w ‘ « ³ » d Ç + , X o | * „ ¯ É Ö â ó
' 4 D T ^ ‡ v ‡ þ † œ
-+ £ ® ·
-+ Í Ø ø
" 7 C
S ! a 2 ƒ ¶ ¼ % Å ë þ ª ' ( Ò 9 û € 5 ¶ Æ Û ' ç H # l , ~ « 2 ² ÿ å ˜ å Ì ~ I K – • I , v $ ƒ ¨ » Õ ë ñ a ÷ 9 Y “ ª Ã Ë Ô B I ( & D ? 2 A E @ L - 1 < ; 9 H / *
-+ # G + 0 J C > ' 6 . 7 3
8 5 $ = ! % 4 K " , : ) F &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to minimize &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks Big break after: Bother you every: C&ustom Change images every: Check this option to disable and hide the minimize button. This way you can prevent skipping the break. Check this option to disable the minimize shortcut button. This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide minimize button Image Folder Path Lock desktop Logo and Icons Maintainer Maximized Minimize Next break is a big break Packaging and help with related issues Popup RSIBreak RSIBreak is currently suspended Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Various contributions Waiting for the right moment to break Welcome Welcome to RSIBreak
+@@ -0,0 +1,54 @@
++Þ• : ì O ¼ ø ( ù "
++ 6 A I \
++ c n
} ‹ •
++ ¤ ¯ · Ì â ê ý . ; J & T {
Š ˜ ¨ » , \ 7 ‰ – Á X b s ! } Ÿ § D ³ ø ý Ù þ { Ø
++ Õ T ^ * Ÿ ‰ T )
# ~
! ¢
> Ä
9 5 o w d + ä ' 4 < V c o €
“ ¡ ´ Á Ë ã ù
++
++ * 5 J _ t 2 „ · ½ Æ Ù î ª ( 9 Ö € ‘ ¡ ¶ ' Â ê ñ H þ G 2 N ÿ ˜ Ì I ç – 1 I È $ 7 Q g m 9 s µ 7 8
9 ' % 3 1 $ * 5 2 . 6 " - &
++ , 4 / ) ( 0 ! # : + &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter For a duration of: General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
@@ -9843,19 +9254,14 @@
+turn this function off. When the popup is shown, it can flash
+when there is activity detected. You
+can turn it off when you find it too
-+intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining _: EMAIL OF TRANSLATORS
-+Your emails _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining _: NAME OF TRANSLATORS
++intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: EMAIL OF TRANSLATORS
++Your emails _: NAME OF TRANSLATORS
+Your names _: This is where the user can request a break
+Take a break now _: minutes:seconds
+%1:%2 _: minutes:seconds
-+%1:00 _n: Big break after next break
-+Big break after %n breaks _n: Please relax for 1 second
-+Please relax for %n seconds _n: one minute
-+%n minutes _n: one second
-+%n seconds minutes seconds tiny breaks Project-Id-Version: rsibreak
-+POT-Creation-Date: 2005-12-14 08:32+0100
++%1:00 _n: Please relax for 1 second
++Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-02-18 10:51+0100
+PO-Revision-Date: 2005-12-14 20:27+0100
+Last-Translator: Tom Albers <tomalbers at kde.nl>
+Language-Team: <kde-i18n-nl at kde.org>
@@ -9864,7 +9270,7 @@
+Content-Transfer-Encoding: 8bit
+X-Generator: KBabel 1.11.1
+Plural-Forms: nplurals=2; plural=(n != 1);
-+ RSIBreak &automatisch starten bij start KDE Sneltoets &wijzigen... &Wijzigen... &Kleur: Sneltoets voor minimaliseren uits&chakelen &Knipperen bij activiteit &Lettertype: &Sneltoets: &Popup gebruiken Een pauze afbreken Info over KDE Info over RSIBreak Lange pauzes Lange pauze na: Korte pauze na: Aangepast Wissel afbeelding elke: Selecteer deze optie om de minimaliseerknop uit te schakelen en te verbergen. Zo kunt u voorkomen dat de pauze kan worden overgeslagen. Selecteer deze optie om de minimaliseerknop uit te schakelen en te verbergen. Zo kunt u voorkomen dat de pauze kan worden overgeslagen. RSIBreak instellen... Teller Gedurende: Algemeen Algemene instellingen &Verbergen Knop '&Minimaliseren' verbergen Map met afbeeldingen Desktop vergrendelen Logo en pictogrammen Onderhouder Gemaximaliseerd Minimaliseren Volgende pauze is een lange pauze Hulp bij het maken van een pakket voor distributie Popup RSIBreak RSIBreak is op dit moment onderbroken Bug rapporteren... RSIBreak voortzetten Inclusief submappen Selecteer de kleur die gebruikt moet worden voor de teller. De teller wordt geplaatst over een foto heen, dus kies een kleur die leesbaar is voor de meeste van uw foto's. Selecteer het lettertype voor de teller. Selecteer de sneltoets voor het onderbreken van de pauze. Selecteer de map die afbeeldingen bevat die u wilt zien tijdens de pauze. Deze kan recursief doorzocht worden, indien gewenst... Diavoorstelling RSIBreak onderbreken Onderbroken Op deze manier is een pauze te forceren Tijden Korte pauzes Probeert RSI te voorkomen door de gebruiker te herinneren aan een pauze. Diverse bijdragen Wachten op het juiste moment voor een pauze. Welkom Welkom bij RSIBreak
++ RSIBreak &automatisch starten bij start KDE Sneltoets &wijzigen... &Wijzigen... &Kleur: &Knipperen bij activiteit &Lettertype: &Sneltoets: &Popup gebruiken Een pauze afbreken Info over KDE Info over RSIBreak Lange pauzes Aangepast Wissel afbeelding elke: RSIBreak instellen... Teller Gedurende: Algemeen Algemene instellingen &Verbergen Map met afbeeldingen Desktop vergrendelen Logo en pictogrammen Gemaximaliseerd Hulp bij het maken van een pakket voor distributie Popup RSIBreak Bug rapporteren... RSIBreak voortzetten Inclusief submappen Selecteer de kleur die gebruikt moet worden voor de teller. De teller wordt geplaatst over een foto heen, dus kies een kleur die leesbaar is voor de meeste van uw foto's. Selecteer het lettertype voor de teller. Selecteer de sneltoets voor het onderbreken van de pauze. Selecteer de map die afbeeldingen bevat die u wilt zien tijdens de pauze. Deze kan recursief doorzocht worden, indien gewenst... Diavoorstelling RSIBreak onderbreken Onderbroken Op deze manier is een pauze te forceren Tijden Korte pauzes Probeert RSI te voorkomen door de gebruiker te herinneren aan een pauze. Welkom Welkom bij RSIBreak
+
+In uw systeemvak ziet u nu een klok. Als u daar met de rechter muisknop op klikt, dan wordt er een contextmenu geopend waarin u onder andere het programma kunt instellen.
+Als u wilt weten wanneer de volgende pauze is, beweeg de muisaanwijzer over de klok.
@@ -9880,95 +9286,27 @@
+kan het knipperen wanneer er activiteit
+gedetecteerd wordt. U kunt het
+uitschakelen wanneer u dit te
-+overheersend vindt. Hier kunt u aangeven of u de teller wilt zien gedurende de pauzes. Het zal aftellen naar nul, zodat u kunt zien hoe lang de pauze duurt. De teller wordt bovenop de foto getoond, als foto's worden getoond. Hier kunt u aangeven of de popup moet knipperen wanneer er activiteit is. Hier kunt u aangeven of u de popup wilt zien wanneer het tijd is voor een pauze. Het zal aftellen naar nul, zodat u kunt zien hoe lang de pauze duurt. Hier kunt u aangeven of RSIBreak gestart moet worden wanneer u KDE start. %1 resterend tomalbers at kde.nl,rinsedevries at kde.nl %1 en %2 resterend Tom Albers,Rinse de Vries Nu een pauze inlassen %1:%2 %1:00 Na de volgende pauze zal een lange pauze volgen
-+Nog %n pauzes voordat er een lange pauze zal zijn Pauzeer gedurende 1 seconde
-+Pauzeer gedurende %n seconden Eén minuut
-+%n minuten Eén seconde
-+%n seconden minuten seconden korte pauzes
-\ Kein Zeilenumbruch am Dateiende.
---- po/pt/Makefile.in
-+++ po/pt/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/pt/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/pt/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/pt/Makefile
-+#>- $(AUTOMAKE) --foreign po/pt/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/pt/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/pt/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/pt/Makefile
-+ $(AUTOMAKE) --foreign po/pt/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/pt/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/pt/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/pt/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/pt/Makefile
-+ $(AUTOMAKE) --foreign po/pt/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/pt/Makefile.in
-
-
++overheersend vindt. Hier kunt u aangeven of u de teller wilt zien gedurende de pauzes. Het zal aftellen naar nul, zodat u kunt zien hoe lang de pauze duurt. De teller wordt bovenop de foto getoond, als foto's worden getoond. Hier kunt u aangeven of de popup moet knipperen wanneer er activiteit is. Hier kunt u aangeven of u de popup wilt zien wanneer het tijd is voor een pauze. Het zal aftellen naar nul, zodat u kunt zien hoe lang de pauze duurt. Hier kunt u aangeven of RSIBreak gestart moet worden wanneer u KDE start. tomalbers at kde.nl,rinsedevries at kde.nl Tom Albers,Rinse de Vries Nu een pauze inlassen %1:%2 %1:00 Pauzeer gedurende 1 seconde
++Pauzeer gedurende %n seconden minuten seconden
+\ No newline at end of file
--- po/pt/rsibreak.gmo
+++ po/pt/rsibreak.gmo
-@@ -0,0 +1,60 @@
-+Þ• L | e Ü p ( q š
-+ ® ¹ Á ß ò
-+ ù
! +
-+ : E V h p g … g í U k s † Ž Ÿ ¥ » Í Ú
-+ é ô þ & ! H N W
w … • ¨ , I
-+ 7 v
-+ – ®
-+ E O ` ! j Œ ” D å % û ! ý ) Ù '
{ Õ } ^ S Ÿ ² T R I § # ñ [ ! q > “ Ò ë 8 9 = w ‘ « ³ » N Ç / F
] k # q • ³ Ã Ì Ý
ó # 7 L [ w t l ì Y r { „ Š Ÿ ! © Ë å ö
-+
-+ " , 5 G } † $ ´ É Þ µ ö 7 ¬ D ä ¦ ) Ð ß ô * ý ( / V ? – % ® Ô ; Þ ô ’ Þ ¢ c ó å U Ù / 9 X g … › ¡ : § M â 0! E! \! d! m! B I ( & D ? 2 A E @ L - 1 < ; 9 H / *
-+ # G + 0 J C > ' 6 . 7 3
8 5 $ = ! % 4 K " , : ) F &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to minimize &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks Big break after: Bother you every: C&ustom Change images every: Check this option to disable and hide the minimize button. This way you can prevent skipping the break. Check this option to disable the minimize shortcut button. This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide minimize button Image Folder Path Lock desktop Logo and Icons Maintainer Maximized Minimize Next break is a big break Packaging and help with related issues Popup RSIBreak RSIBreak is currently suspended Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Various contributions Waiting for the right moment to break Welcome Welcome to RSIBreak
+@@ -0,0 +1,64 @@
++Þ• G T a Œ ( :
++ N Y a { Ž
++ •
¯ ½ Ç
++ Ö á ò ú c c s × í õ ! ' 9 K X g & q ˜ ž
§ µ Å Ø , y 7 ¦ – Þ u
++ z
++ „
++ •
++ ! Ÿ
++ Á
++ É
++ Õ
++ D ç
++ , ý 4 Ù 2 {
Õ ˆ
^ ^ Ÿ ½ T ] ^ ² _ # q p • q ! x > š Ù ò % 9 ? y N ‰ / Ø
- ! 3 U s ƒ Œ
³ Á Ô ã ø s h ” ý ( . C M m ‡ ˜
++ ¬ 5 · í ö ÿ ) µ A 7 ÷ D / ¦ t # 2 G * P { ‚ ’ V ¨ ÿ ; ô E ’ : Þ Í c ¬ ó U ' Z ( ‚ « , Ê - ÷ % C Y _ e z M ‘ ß ç 2 * / @ ; 3 = 1 G $ F < , ! A - )
++ % E " # + :
D ? 6 ( 5 C 9 8 . 0 > B ' 4 7 & &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks Big break every: C&ustom Change images every: Check this option to disable and hide the skip button. This way you can prevent skipping the break. Check this option to disable the skip shortcut button. This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Tiny break every: Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
@@ -9982,26 +9320,27 @@
+when there is activity detected. You
+can turn it off when you find it too
+intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining _: EMAIL OF TRANSLATORS
++%1 remaining until next big break _: Argument: seconds part or minutes part as defined earlier
++%1 remaining until next tiny break _: EMAIL OF TRANSLATORS
+Your emails _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining _: NAME OF TRANSLATORS
++%1 and %2 remaining until next big break _: First argument: minutes, second: seconds both as you defined earlier
++%1 and %2 remaining until next tiny break _: NAME OF TRANSLATORS
+Your names _: This is where the user can request a break
+Take a break now _: minutes:seconds
+%1:%2 _: minutes:seconds
-+%1:00 _n: Big break after next break
-+Big break after %n breaks _n: Please relax for 1 second
-+Please relax for %n seconds _n: one minute
-+%n minutes _n: one second
-+%n seconds minutes seconds tiny breaks Project-Id-Version: rsibreak
-+POT-Creation-Date: 2005-12-14 08:32+0100
-+PO-Revision-Date: 2005-12-13 18:42+0000
++%1:00 _n: One minute
++%n minutes _n: One second
++%n seconds _n: Please relax for 1 second
++Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-02-18 10:51+0100
++PO-Revision-Date: 2006-02-16 16:37+0000
+Last-Translator: José Nuno Coelho Pires <jncp at netcabo.pt>
+Language-Team: pt <kde-i18n-doc at kde.org>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-POFile-SpellExtra: RSIBreak ESC
-+ Iniciar &automaticamente o RSIBreak no arranque Modifi&car o Atalho... Modifi&car... &Cor: &Desactivar o atalho para minimizar Piscar em caso de acti&vidade T&ipo de letra: A&talho: &Usar a mensagem Interromper uma pausa Acerca do KDE Acerca do RSIBreak Grandes Pausas Grande pausa após: Incomodá-lo a cada: Personali&zado Mudar as imagens a cada: Assinale esta opção para desactivar e esconder o botão de minimização. Desta forma, poderá evitar saltar a pausa. Assinale esta opção para desactivar o botão de minimização. Desta forma, poderá evitar saltar a pausa. Configurar o RSIBreak... Contador Durante: Geral Configuração Geral &Esconder Esconder o botão para m&inimizar Local da Pasta de Imagens Bloquear o ecrã Logótipo e Ãcones Manutenção Maximizada Minimizar A próxima pausa é grande Gestão de pacotes e ajuda com problemas relacionados Mensagem RSIBreak O RSIBreak está suspenso de momento Comunicar um Erro... Continuar o RSIBreak Procurar recursivamente Seleccione aqui a cor a usar para o contador. Dado que este será apresentado no cimo das imagens, poderá querer configurá-lo com uma cor que seja visÃvel na maioria das imagens. Seleccione aqui o tipo de letra a usar para o contador. Seleccione aqui o atalho de teclado a usar para interromper a pausa. Seleccione a pasta onde deseja ver as imagens. Estas serão mostradas de forma aleatória durante as pausas. Será percorrida de forma recursiva se você o desejar... Apresentação Suspender o RSIBreak Suspenso Desta forma, poderá fazer agora uma pausa Tempos Pequenas Pausas Tenta evitar a Lesão por Tensão Repetitiva, recordando um utilizador para descansar. Várias contribuições À espera do momento certo para parar Bem-vindo Bem-vindo ao RSIBreak
++ Iniciar &automaticamente o RSIBreak no arranque Modifi&car o Atalho... Modifi&car... &Cor: &Desactivar o atalho para ignorar Piscar em caso de acti&vidade T&ipo de letra: A&talho: &Usar a mensagem Interromper uma pausa Acerca do KDE Acerca do RSIBreak Grandes Pausas Pausa grande a cada: Personali&zado Mudar as imagens a cada: Assinale esta opção para desactivar e esconder o botão para ignorar. Desta forma, poderá evitar saltar a pausa. Assinale esta opção para desactivar o botão para ignorar. Desta forma, poderá evitar saltar a pausa. Configurar o RSIBreak... Contador Durante: Geral Configuração Geral &Esconder Esconder o botão para &ignorar Local da Pasta de Imagens Bloquear o ecrã Logótipo e Ãcones Maximizada Gestão de pacotes e ajuda com problemas relacionados Mensagem RSIBreak Comunicar um Erro... Continuar o RSIBreak Procurar recursivamente Seleccione aqui a cor a usar para o contador. Dado que este será apresentado no cimo das imagens, poderá querer configurá-lo com uma cor que seja visÃvel na maioria das imagens. Seleccione aqui o tipo de letra a usar para o contador. Seleccione aqui o atalho de teclado a usar para interromper a pausa. Seleccione a pasta onde deseja ver as imagens. Estas serão mostradas de forma aleatória durante as pausas. Será percorrida de forma recursiva se você o desejar... Ignorar Apresentação Suspender o RSIBreak Suspenso Desta forma, poderá fazer agora uma pausa Tempos Pequenas Pausas Pausa pequena a cada: Tenta evitar a Lesão por Tensão Repetitiva, recordando um utilizador para descansar. Bem-vindo Bem-vindo ao RSIBreak
+
+Na sua bandeja do sistema, poderá ver um relógio. Quando carregar com o botão direito do rato nele, poderá ver um menu, no qual poderá ir à configuração, por exemplo.
+Quando quiser saber quando é a próxima pausa, passe o cursor do rato sobre o Ãcone.
@@ -10013,100 +9352,25 @@
+e não a janela, desligue esta função. Quando for mostrada a mensagem, esta
+poderá piscar quando for detectada actividade.
+Podê-la-á desligar quando achar que é
-+demasiado incómoda. Com esta opção, poderá indicar se deseja ver um contador durante as pausas. Irá contar até zero, para que possa saber quanto irá durar esta pausa. Será apresentada no cimo da imagem, quando estas forem apresentadas. Com esta opção, poderá indicar se quer ver a mensagem a piscar quando ocorrer alguma actividade. Com esta opção, poderá indicar se deseja ver a mensagem, quando for a altura de fazer uma pausa. Irá contar até zero, para que possa saber quanto irá durar esta pausa. Será apresentada no cimo da imagem, quando estas forem apresentadas. Com esta opção, poderá indicar se quer o RSIBreak a iniciar quando o KDE arrancar. Faltam %1 jncp at netcabo.pt,morais at kde.org Faltam %1 e %2 José Nuno Pires,Pedro Morais Fazer uma pausa agora %1:%2 %1:00 Pausa grande após a próxima
-+Pausa grande após %n pausas Por favor, descanse durante 1 segundo
-+Por favor, descanse durante %n segundos um minuto
-+%n minutos um segundo
-+%n segundos minutos segundos pausas pequenas
-\ Kein Zeilenumbruch am Dateiende.
---- po/sr/Makefile.in
-+++ po/sr/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sr/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sr/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/sr/Makefile
-+#>- $(AUTOMAKE) --foreign po/sr/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sr/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sr/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/sr/Makefile
-+ $(AUTOMAKE) --foreign po/sr/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/sr/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sr/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sr/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/sr/Makefile
-+ $(AUTOMAKE) --foreign po/sr/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/sr/Makefile.in
-
-
++demasiado incómoda. Com esta opção, poderá indicar se deseja ver um contador durante as pausas. Irá contar até zero, para que possa saber quanto irá durar esta pausa. Será apresentada no cimo da imagem, quando estas forem apresentadas. Com esta opção, poderá indicar se quer ver a mensagem a piscar quando ocorrer alguma actividade. Com esta opção, poderá indicar se deseja ver a mensagem, quando for a altura de fazer uma pausa. Irá contar até zero, para que possa saber quanto irá durar esta pausa. Será apresentada no cimo da imagem, quando estas forem apresentadas. Com esta opção, poderá indicar se quer o RSIBreak a iniciar quando o KDE arrancar. Faltam %1 até à próxima pausa grande Faltam %1 até à próxima pausa pequena jncp at netcabo.pt,morais at kde.org Faltam %1 e %2 até à próxima pausa grande Faltam %1 e %2 até à próxima pausa pequena José Nuno Pires,Pedro Morais Fazer uma pausa agora %1:%2 %1:00 Um minuto
++%n minutos Um segundo
++%n segundos Por favor, descanse durante 1 segundo
++Por favor, descanse durante %n segundos minutos segundos
+\ No newline at end of file
--- po/sr/rsibreak.gmo
+++ po/sr/rsibreak.gmo
-@@ -0,0 +1,26 @@
-+Þ• " , / < ø
-+ ù *
-+ 1
< J [ m u Š ¨ ° Á Ç Ý
-+ ï ú
- 7 D ? % „ ª # ² ! Ö 9 ø 2 : B B N ‘
-+ ¤ < ¯
-+ ì ÷ # " F f % | ¢ »
-+ È Ó
ï 6 ý ( 4 ] r … " Ž ± Ñ ã Ÿ ö 6 – Í â ô
-+ ¾
-+ Ë
-+ Ú
-+ !
-+ " &Change... &Color: &Disable shortcut to minimize &Font: &Shortcut: Abort a break Big break after: Bother you every: C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide H&ide minimize button Image Folder Path Maintainer Minimize RSIBreak Report Bug... Search recursively Slideshow Timings Try to prevent Repetitive Strain Injury by reminding a user to rest. Waiting for the right moment to break Welcome _: EMAIL OF TRANSLATORS
+@@ -0,0 +1,21 @@
++Þ• ì % ¼ P
++ Q \ d
++ k
v „ Œ ¡ · ¿ Ç Ø Þ ð
ù $ D , q # y ! 9 ¿ ù B L
++ _
++ j u † % ¶ Ü õ
++
) ( 7 ` " i Œ ¬ ¾ Ÿ Ñ q † ˜ ´ b o
++
&Change... &Color: &Font: &Shortcut: Abort a break C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide Image Folder Path RSIBreak Report Bug... Search recursively Slideshow Timings Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome _: EMAIL OF TRANSLATORS
+Your emails _: NAME OF TRANSLATORS
+Your names _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds tiny breaks Project-Id-Version: rsibreak
-+POT-Creation-Date: 2005-12-14 08:32+0100
++Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-02-18 10:51+0100
+PO-Revision-Date: 2005-11-17 15:27+0100
+Last-Translator: Slobodan Simic <simicsl at verat.net>
+Language-Team: Serbian <kde-yu at kde-yu.org>
@@ -10114,94 +9378,24 @@
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: KBabel 1.10.2
-+ &Промени... &Боја: &ИÑкључи пречицу за минимизирање &Фонт: &Пречица: Прекини паузу Велике паузе поÑле: Гњави Ð²Ð°Ñ Ñваких: Произ&вољно Измени Ñлике Ñваких: ПодеÑи RSIBreak... Бројач Опште Опште поÑтавке &Сакриј &Сакриј дугме за минимизирање Путања фаÑцикле Ñлике Одржавалац Минимизуј RSIBreak Пријавите грешку... Тражи рекурзивно Слајд-шоу Темпирања Покушај превенције повреда од понављајућих покрета подÑећањем кориÑника да Ñе одмори. Чекам прави тренутак за паузу Добродошли simicsl at verat.net Слободан Симић Молим Ð²Ð°Ñ Ð´Ð° одморите %n Ñекунду
++ &Промени... &Боја: &Фонт: &Пречица: Прекини паузу Произ&вољно Измени Ñлике Ñваких: ПодеÑи RSIBreak... Бројач Опште Опште поÑтавке &Сакриј Путања фаÑцикле Ñлике RSIBreak Пријавите грешку... Тражи рекурзивно Слајд-шоу Темпирања Покушај превенције повреда од понављајућих покрета подÑећањем кориÑника да Ñе одмори. Добродошли simicsl at verat.net Слободан Симић Молим Ð²Ð°Ñ Ð´Ð° одморите %n Ñекунду
+Молим Ð²Ð°Ñ Ð´Ð° одморите %n Ñекунде
-+Молим Ð²Ð°Ñ Ð´Ð° одморите %n Ñекунди минута Ñекунди кратке паузе
-\ Kein Zeilenumbruch am Dateiende.
---- po/sr at Latn/Makefile.in
-+++ po/sr at Latn/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sr at Latn/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sr at Latn/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/sr at Latn/Makefile
-+#>- $(AUTOMAKE) --foreign po/sr at Latn/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sr at Latn/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sr at Latn/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/sr at Latn/Makefile
-+ $(AUTOMAKE) --foreign po/sr at Latn/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/sr at Latn/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sr at Latn/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sr at Latn/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/sr at Latn/Makefile
-+ $(AUTOMAKE) --foreign po/sr at Latn/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/sr at Latn/Makefile.in
-
-
++Молим Ð²Ð°Ñ Ð´Ð° одморите %n Ñекунди минута Ñекунди
+\ No newline at end of file
--- po/sr at Latn/rsibreak.gmo
+++ po/sr at Latn/rsibreak.gmo
-@@ -0,0 +1,22 @@
-+Þ• " , / < ø
-+ ù *
-+ 1
< J [ m u Š ¨ ° Á Ç Ý
-+ ï ú
- 7 D ? % „ ª # ² ! Ö 9 ø 2 : B B N ‘ $ ¤ É
-+ Ð
Û é ý 2 E M T d l ‹ ¢ ® ¸ Á Ö
-+ è
-+ ó Z þ Y x „ – b ¦ !
-+ " &Change... &Color: &Disable shortcut to minimize &Font: &Shortcut: Abort a break Big break after: Bother you every: C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide H&ide minimize button Image Folder Path Maintainer Minimize RSIBreak Report Bug... Search recursively Slideshow Timings Try to prevent Repetitive Strain Injury by reminding a user to rest. Waiting for the right moment to break Welcome _: EMAIL OF TRANSLATORS
+@@ -0,0 +1,21 @@
++Þ• ì % ¼ P
++ Q \ d
++ k
v „ Œ ¡ · ¿ Ç Ø Þ ð
ù $ D , q # y ! 9 ¿ ù B L X _
++ f
q Œ ¡ ´ ¼ Ã Ó Û ò û
++ "
++ - Z 8 “ Ÿ ± b Á $ +
++
&Change... &Color: &Font: &Shortcut: Abort a break C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide Image Folder Path RSIBreak Report Bug... Search recursively Slideshow Timings Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome _: EMAIL OF TRANSLATORS
+Your emails _: NAME OF TRANSLATORS
+Your names _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds tiny breaks Project-Id-Version: rsibreak
-+POT-Creation-Date: 2005-12-14 08:32+0100
++Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-02-18 10:51+0100
+PO-Revision-Date: 2005-11-17 15:27+0100
+Last-Translator: Slobodan Simic <simicsl at verat.net>
+Language-Team: Serbian <kde-yu at kde-yu.org>
@@ -10209,94 +9403,29 @@
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: KBabel 1.10.2
-+ &Promeni... &Boja: &IskljuÄi preÄicu za minimiziranje &Font: &PreÄica: Prekini pauzu Velike pauze posle: Gnjavi vas svakih: Proiz&voljno Izmeni slike svakih: Podesi RSIBreak... BrojaÄ OpÅ¡te OpÅ¡te postavke &Sakrij &Sakrij dugme za minimiziranje Putanja fascikle slike Održavalac Minimizuj RSIBreak Prijavite greÅ¡ku... Traži rekurzivno Slajd-Å¡ou Tempiranja PokuÅ¡aj prevencije povreda od ponavljajućih pokreta podsećanjem korisnika da se odmori. ÄŒekam pravi trenutak za pauzu DobrodoÅ¡li simicsl at verat.net Slobodan Simić Molim vas da odmorite %n sekundu
++ &Promeni... &Boja: &Font: &PreÄica: Prekini pauzu Proiz&voljno Izmeni slike svakih: Podesi RSIBreak... BrojaÄ OpÅ¡te OpÅ¡te postavke &Sakrij Putanja fascikle slike RSIBreak Prijavite greÅ¡ku... Traži rekurzivno Slajd-Å¡ou Tempiranja PokuÅ¡aj prevencije povreda od ponavljajućih pokreta podsećanjem korisnika da se odmori. DobrodoÅ¡li simicsl at verat.net Slobodan Simić Molim vas da odmorite %n sekundu
+Molim vas da odmorite %n sekunde
-+Molim vas da odmorite %n sekundi minuta sekundi kratke pauze
-\ Kein Zeilenumbruch am Dateiende.
---- po/sv/Makefile.in
-+++ po/sv/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sv/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sv/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/sv/Makefile
-+#>- $(AUTOMAKE) --foreign po/sv/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sv/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sv/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/sv/Makefile
-+ $(AUTOMAKE) --foreign po/sv/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/sv/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sv/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sv/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/sv/Makefile
-+ $(AUTOMAKE) --foreign po/sv/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/sv/Makefile.in
-
-
++Molim vas da odmorite %n sekundi minuta sekundi
+\ No newline at end of file
--- po/sv/rsibreak.gmo
+++ po/sv/rsibreak.gmo
-@@ -0,0 +1,62 @@
-+Þ• L | e Ü p ( q š
-+ ® ¹ Á ß ò
-+ ù
! +
-+ : E V h p g … g í U k s † Ž Ÿ ¥ » Í Ú
-+ é ô þ & ! H N W
w … • ¨ , I
-+ 7 v
-+ – ®
-+ E O ` ! j Œ ” D å % û ! ý ) Ù '
{ Õ } ^ S Ÿ ² T R I § # ñ [ ! q > “ Ò ë 8 9 = w ‘ « ³ » F Ç $ 3
-+ K V & ^ …
› © ¸ Ô ã ê
ö % + > u À 6 J S ` i ‚ ‰ ¡ » Ê
-+ Ý è ò û + E X ' a ‰ › ¯ ¯ ¾ 3 n ? ¢ ~ â a j } $ ‡ ¬ ² P ¿ (
-+ H ý S ñ Q ‹ C Ç Ï l — › Y
ú # 8
I W ] 7 c 4 › Ð ä ú B I ( & D ? 2 A E @ L - 1 < ; 9 H / *
-+ # G + 0 J C > ' 6 . 7 3
8 5 $ = ! % 4 K " , : ) F &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to minimize &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks Big break after: Bother you every: C&ustom Change images every: Check this option to disable and hide the minimize button. This way you can prevent skipping the break. Check this option to disable the minimize shortcut button. This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide minimize button Image Folder Path Lock desktop Logo and Icons Maintainer Maximized Minimize Next break is a big break Packaging and help with related issues Popup RSIBreak RSIBreak is currently suspended Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Various contributions Waiting for the right moment to break Welcome Welcome to RSIBreak
+@@ -0,0 +1,66 @@
++Þ• G T a Œ ( :
++ N Y a { Ž
++ •
¯ ½ Ç
++ Ö á ò ú c c s × í õ ! ' 9 K X g & q ˜ ž
§ µ Å Ø , y 7 ¦ – Þ u
++ z
++ „
++ •
++ ! Ÿ
++ Á
++ É
++ Õ
++ D ç
++ , ý 4 Ù 2 {
Õ ˆ
^ ^ Ÿ ½ T ] ^ ² _ # q p • q ! x > š Ù ò % 9 ? y F ‰ $ Ð õ
++
+ L
b p › ª ±
½ Ë Ý ã „ ö ‚ { þ ( 1 J Q l † • ¨ + ² Þ ñ ú ¯ / 3 ß ? ~ S Ò Þ ç ú $ ) / < P M
++ ž ý © ñ § ‹ ™ Ç % l í › Z Y ö & P % w - ¸ , æ
$ 2 8 > R 4 h ¥ 2 * / @ ; 3 = 1 G $ F < , ! A - )
++ % E " # + :
D ? 6 ( 5 C 9 8 . 0 > B ' 4 7 & &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks Big break every: C&ustom Change images every: Check this option to disable and hide the skip button. This way you can prevent skipping the break. Check this option to disable the skip shortcut button. This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Tiny break every: Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
@@ -10310,26 +9439,27 @@
+when there is activity detected. You
+can turn it off when you find it too
+intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining _: EMAIL OF TRANSLATORS
++%1 remaining until next big break _: Argument: seconds part or minutes part as defined earlier
++%1 remaining until next tiny break _: EMAIL OF TRANSLATORS
+Your emails _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining _: NAME OF TRANSLATORS
++%1 and %2 remaining until next big break _: First argument: minutes, second: seconds both as you defined earlier
++%1 and %2 remaining until next tiny break _: NAME OF TRANSLATORS
+Your names _: This is where the user can request a break
+Take a break now _: minutes:seconds
+%1:%2 _: minutes:seconds
-+%1:00 _n: Big break after next break
-+Big break after %n breaks _n: Please relax for 1 second
-+Please relax for %n seconds _n: one minute
-+%n minutes _n: one second
-+%n seconds minutes seconds tiny breaks Project-Id-Version: rsibreak
-+POT-Creation-Date: 2005-12-14 08:32+0100
-+PO-Revision-Date: 2005-12-14 18:41+0100
++%1:00 _n: One minute
++%n minutes _n: One second
++%n seconds _n: Please relax for 1 second
++Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-02-18 10:51+0100
++PO-Revision-Date: 2006-02-16 18:38+0100
+Last-Translator: Stefan Asserhäll <stefan.asserhall at comhem.se>
+Language-Team: Swedish <sv at li.org>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
-+X-Generator: KBabel 1.11.1
-+ Kör &automatiskt RSIbreak vid start Ä&ndra snabbtangent... Ä&ndra... &Färg: &Inaktivera snabbtangent för minimera &Blinka vid aktivitet &Teckensnitt: &Snabbtangent: An&vänd meddelandefönster Avbryt en rast Om KDE Om RSIbreak Långa raster Lång rast efter: Stör dig var: E&gen Ändra bilder var: Markera alternativet för att inaktivera och dölja minimeringsknappen. På så sätt kan du förhindra att en rast hoppas över. Markera alternativet för att inaktivera minimeringsknappen. På så sätt kan du förhindra att rasten hoppas över. Anpassa RSIbreak... Räknare Under tiden: Allmänt Allmänna inställningar &Dölj Dölj &minimeringsknapp Sökväg till bildkatalog Lås skrivbord Logotyp och ikoner Utvecklare Maximerad Minimera Nästa rast är en lång rast Paketering och hjälp med besläktade saker Meddelandefönster RSIbreak RSIbreak är för närvarande avstängt Rapportera fel... Återuppta RSIbreak Sök rekursivt Välj färgen att använda för räknaren här. Eftersom den används ovanpå bilderna, kan du nog vilja ställa in den till en färg som är synlig med de flesta av bilderna. Välj teckensnitt att använda för räknaren här. Välj snabbtangenten att använda för att avbryta rasten här. Välj katalogen du vill se bilder från. Bilderna visas slumpmässigt under rasterna. Den söks igenom rekursivt om du vill... Bildspel Stäng av RSIbreak Avstängt På detta sätt kan du ta en rast nu Tider Korta raster Försök förhindra belastningsskador genom att påminna användare om att vila. Diverse bidrag Väntar på rätt ögonblick att ta rast Välkommen Välkommen till RSIbreak
++X-Generator: KBabel 1.11.2
++ Kör &automatiskt RSIbreak vid start Ä&ndra snabbtangent... Ä&ndra... &Färg: &Inaktivera snabbtangent för överhoppning &Blinka vid aktivitet &Teckensnitt: &Snabbtangent: An&vänd meddelandefönster Avbryt en rast Om KDE Om RSIbreak Långa raster Lång rast efter: E&gen Ändra bilder var: Markera alternativet för att inaktivera och dölja överhoppningsknappen. På så sätt kan du förhindra att en rast hoppas över. Markera alternativet för att inaktivera snabbknappen för överhoppning. På så sätt kan du förhindra att rasten hoppas över. Anpassa RSIbreak... Räknare Under tiden: Allmänt Allmänna inställningar &Dölj Dölj över&hoppningsknapp Sökväg till bildkatalog Lås skrivbord Logotyp och ikoner Maximerad Paketering och hjälp med besläktade saker Meddelandefönster RSIbreak Rapportera fel... Återuppta RSIbreak Sök rekursivt Välj färgen att använda för räknaren här. Eftersom den används ovanpå bilderna, kan du nog vilja ställa in den till en färg som är synlig med de flesta av bilderna. Välj teckensnitt att använda för räknaren här. Välj snabbtangenten att använda för att avbryta rasten här. Välj katalogen du vill se bilder från. Bilderna visas slumpmässigt under rasterna. Den söks igenom rekursivt om du vill... Hoppa över Bildspel Stäng av RSIbreak Avstängt På detta sätt kan du ta en rast nu Tider Korta raster Kort rast efter: Försök förhindra belastningsskador genom att påminna användare om att vila. Välkommen Välkommen till RSIbreak
+
+Du ser nu en klocka i systembrickan. När du högerklickar på den ser du en meny där du till exempel kan visa inställningarna.
+Om du vill veta när nästa rast är, håll musen över ikonen.
@@ -10342,277 +9472,52 @@
+funktionen. När meddelandefönstret visas kan det
+blinka när aktivitet detekteras. Du kan
+stänga av det om du tycker att det är
-+för påträngande. Du kan ange om du vill se en räknare under rasterna med den här kryssrutan. Den räknar ner till noll, så att du vet hur lång rasten kommer att bli. Den visas ovanpå bilderna, när bilder visas. Du kan ange om du vill att meddelandefönstret ska blinka när aktivitet inträffar med den här kryssrutan. Du kan ange om du vill se ett meddelandefönster när det är dags för en rast. Den räknar ner till noll, så att du vet hur lång rasten kommer att bli. Du kan ange att du vill att RSIbreak ska köras när KDE startas med den här kryssrutan. %1 återstår stefan.asserhall at comhem.se %1 och %2 återstår Stefan Asserhall Ta en rast nu %1:%2 %1:00 Lång rast efter nästa rast
-+LÃ¥ng rast efter %n raster Koppla av under 1 sekund
-+Koppla av under %n sekunder en minut
-+%n minuter en sekund
-+%n sekunder minuter sekunder korta raster
-\ Kein Zeilenumbruch am Dateiende.
---- po/tr/Makefile.in
-+++ po/tr/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/tr/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/tr/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/tr/Makefile
-+#>- $(AUTOMAKE) --foreign po/tr/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/tr/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/tr/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/tr/Makefile
-+ $(AUTOMAKE) --foreign po/tr/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/tr/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/tr/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/tr/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/tr/Makefile
-+ $(AUTOMAKE) --foreign po/tr/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/tr/Makefile.in
-
-
++för påträngande. Du kan ange om du vill se en räknare under rasterna med den här kryssrutan. Den räknar ner till noll, så att du vet hur lång rasten kommer att bli. Den visas ovanpå bilderna, när bilder visas. Du kan ange om du vill att meddelandefönstret ska blinka när aktivitet inträffar med den här kryssrutan. Du kan ange om du vill se ett meddelandefönster när det är dags för en rast. Den räknar ner till noll, så att du vet hur lång rasten kommer att bli. Du kan ange att du vill att RSIbreak ska köras när KDE startas med den här kryssrutan. %1 återstår innan nästa långa rast %1 återstår innan nästa korta rast stefan.asserhall at comhem.se %1 och %2 återstår innan nästa långa rast %1 och %2 återstår innan nästa korta rast Stefan Asserhall Ta en rast nu %1:%2 %1:00 En minut
++%n minuter En sekund
++%n sekunder Koppla av under 1 sekund
++Koppla av under %n sekunder minuter sekunder
+\ No newline at end of file
--- po/tr/rsibreak.gmo
+++ po/tr/rsibreak.gmo
-@@ -0,0 +1,38 @@
-+Þ• & L 5 | P
-+ Q \ d ‚
-+ ‰
” ¢ ³ Å g Í g 5 ³ » Ã Ô Ú ð
-+
- @ , á 7 F % N t ý | Õ z # P ! t 9 – Ð Ø à [ ì H
-+ W
-+ * ^
-+ ‰
-+
-+ –
-+ ¡
-+ µ
-+ Ï
-+ Þ
-+ † å
-+ ‚ l ï
& - L _ g q z Š ¯ Ÿ 6 O
E †
Ì
, Ù
Í â ë ü # / 9
C
$
-+ & # " % ! &Change... &Color: &Disable shortcut to minimize &Font: &Shortcut: Abort a break Big break after: Bother you every: C&ustom Check this option to disable and hide the minimize button. This way you can prevent skipping the break. Check this option to disable the minimize shortcut button. This way you can prevent skipping the break. Configure RSIBreak... Counter General General Settings H&ide H&ide minimize button Image Folder Path Maintainer Minimize RSIBreak Report Bug... Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Timings Waiting for the right moment to break Welcome Welcome to RSIBreak
+@@ -0,0 +1,40 @@
++Þ• 1 ¤ C , 8 ( 9 b
++ v ‰
++
› © ³
++ Â Í Õ ê ! ' 9 F U & _ †
À , a 7 Ž – Æ ] g x ‚ Š – ý ž Õ œ Ÿ r #
++ ! 6
++ X
++ q
++ Š
++ ¤
++ 9 ¾
++ ø
++ A 0 J { ” £ ª
++ · Â
Ö ä ÷
.
J
Q
W
e
l
•
¦
% ¶
Ü
å
õ
¯ ! 6 Ñ E ¦ N õ -
:
H Í V $ - 6 G V \ b l # v š ¡ " # - 0 ( ' $ 1 % ! & / , ) *
++
. + &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Font: &Shortcut: Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended Timings Tiny Breaks Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
+
-+Use RSIBreak wisely. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. _: EMAIL OF TRANSLATORS
++Use RSIBreak wisely. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. _: EMAIL OF TRANSLATORS
+Your emails _: NAME OF TRANSLATORS
-+Your names _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds tiny breaks Project-Id-Version: rsibreak
-+POT-Creation-Date: 2005-12-14 08:32+0100
-+PO-Revision-Date: 2005-11-03 14:42+0200
-+Last-Translator: Aydın Demirel <aydin at kde.org.tr>
-+Language-Team: KDE Türkçe Yerelleştirme <yerellestirme at kde.org.tr>
++Your names _: minutes:seconds
++%1:%2 _: minutes:seconds
++%1:00 _n: One minute
++%n minutes _n: One second
++%n seconds _n: Please relax for 1 second
++Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-02-18 10:51+0100
++PO-Revision-Date: 2006-02-03 21:31+0200
++Last-Translator: Engin Çağatay <engincagatay at yahoo.com>
++Language-Team: Türkçe <tr at li.org>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
-+X-Generator: KBabel 1.9.1
-+ &Değiştir... &Renk: Küçültülecek kısayolu &etkisizleştir &Yazı Tipi: Kı&sayol: Bir kesme hakkında -den sonra büyük kesme: Can sıkıcı: &Özel Küçültme düğmesini gizlemek ve etkisizleştirmek için bu seçeneği kontrol edin. Bu yolla kesme atlamasını önleyebilirsiniz. Küçültme kısayolu düğmesini etkisiz kılmak için bu seçeneği kontrol edin. Bu yolla kesme atlamasını önleyebilirsiniz. RSIBreak'ı yapılandır... Sayaç Genel Genel Ayarlar G&izle Küçültme düğmesini g&izle Resim Klasör Yolu Sorumlu Küçült RSIBreak Hata Raporla... Tekrarlı olarak ara Burada sayaç için kullanılacak rengi seçin. Bunun gibi resimlerin üstünde kullanılır, resimlerin pek çoğu için görünmez olan bir rengi ayarlamak isteyebilirsiniz. Burada sayaç için kullanılacak yazı tipini seçin. Burada kesmayi yarıda bırakmak için kullanılacak kısayolu seçin Zamanlamalar Kesmeyi doğru zamanda yapmak için bekleyin Hoş geldiniz RSIBreak'e hoşgeldiniz
++X-Generator: KBabel 1.10.2
++ RSIBreak'i &açılışta otomatik olarak başlat &Kısayolu Değiştir... &Değiştir... &Renk: &Yazı Tipi: Kı&sayol: Bir kesme hakkında KDE Hakkında RSIBreak Hakkında Büyük Kesmeler &Özel Resim değiştirme aralığı: RSIBreak'ı yapılandır... Sayaç Genel Genel Ayarlar G&izle Resim Klasör Yolu Masaüstünü kilitle Logo ve Simgeler Büyütülmüş Paketleme ve ilgili konularda yardım RSIBreak Hata Raporla... RSIBreak'i Devam Ettir Tekrarlı olarak ara Burada sayaç için kullanılacak rengi seçin. Bunun gibi resimlerin üstünde kullanılır, resimlerin pek çoğu için görünmez olan bir rengi ayarlamak isteyebilirsiniz. Burada sayaç için kullanılacak yazı tipini seçin. Burada kesmayi yarıda bırakmak için kullanılacak kısayolu seçin Görmek istediğiniz resimlerin klasörünü seçin. Bu resimler rastgele olarak kesmeler boyunca gösterilir. Bu eğer isterseniz tekrarlı olarak arayabilecektir... Slayt gösterisi RSIBreak'i Askıya Al Askıya Alındı Zamanlamalar Ufak Kesmeler Hoş geldiniz RSIBreak'e hoşgeldiniz
+
+Şimdi tepsiniz içinde bir saat görebilirsiniz.
+Sonraki kesmenin ne zaman olacağını bilmek istediğiniz zaman, hover simgeyi bitirir.
+
-+Her ihtimale karşı RSIBreak kullanın. Kesmeler boyunca eğer bir sayaç görmek istiyorsanız bu onay kutusu ile imleyebilirsiniz. Bu sıfıra doğru geriye sayacaktır, bu yüzden kesmenin ne kadar uzunlukta olacağını bilirsiniz. Resimler gösterildiği zaman, bu resmin üzerinde gösterilecektir. aydin at kde.org.tr Aydın Demirel Lütfen %n saniye için rahatlayın dakikalar saniyeler ufak kesmeler
-\ Kein Zeilenumbruch am Dateiende.
---- rsibreak/Makefile.in
-+++ rsibreak/Makefile.in
-@@ -193,6 +193,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -332,7 +335,7 @@
- all: docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/../admin/Doxyfile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/../admin/Doxyfile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -341,9 +344,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu rsibreak/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign rsibreak/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu rsibreak/Makefile
-+#>- $(AUTOMAKE) --foreign rsibreak/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -353,9 +356,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu rsibreak/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign rsibreak/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu rsibreak/Makefile
-+ $(AUTOMAKE) --foreign rsibreak/Makefile
- cd $(top_srcdir) && perl admin/am_edit rsibreak/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -370,9 +373,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -768,9 +771,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu rsibreak/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign rsibreak/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu rsibreak/Makefile
-+ $(AUTOMAKE) --foreign rsibreak/Makefile
- cd $(top_srcdir) && perl admin/am_edit rsibreak/Makefile.in
-
-
---- rsibreak/src/Makefile.in
-+++ rsibreak/src/Makefile.in
-@@ -70,8 +70,7 @@
- @KDE_USE_FINAL_FALSE at rsibreak_OBJECTS = $(rsibreak_nofinal_OBJECTS)
- @KDE_USE_FINAL_TRUE at rsibreak_OBJECTS = $(rsibreak_final_OBJECTS)
- am__DEPENDENCIES_1 =
--rsibreak_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
-- $(am__DEPENDENCIES_1)
-+rsibreak_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
- DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
- depcomp = $(SHELL) $(top_srcdir)/admin/depcomp
- am__depfiles_maybe = depfiles
-@@ -234,6 +233,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -386,7 +388,7 @@
- setupmaximized.cpp
-
- rsibreak_LDFLAGS = $(KDE_RPATH) $(all_libraries)
--rsibreak_LDADD = $(LIB_KDEUI) $(LIB_KIO) $(LIBXSS)
-+rsibreak_LDADD = $(LIB_KDEUI) $(LIB_KIO) -lXss
-
- # this is where the desktop file will go
- xdg_apps_DATA = rsibreak.desktop
-@@ -398,7 +400,7 @@
-
- .SUFFIXES:
- .SUFFIXES: .cpp .lo .o .obj
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/../../admin/Doxyfile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/../../admin/Doxyfile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -407,9 +409,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu rsibreak/src/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign rsibreak/src/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu rsibreak/src/Makefile
-+#>- $(AUTOMAKE) --foreign rsibreak/src/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -419,9 +421,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu rsibreak/src/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign rsibreak/src/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu rsibreak/src/Makefile
-+ $(AUTOMAKE) --foreign rsibreak/src/Makefile
- cd $(top_srcdir) && perl admin/am_edit rsibreak/src/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -436,9 +438,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
- install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
-@@ -958,9 +960,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu rsibreak/src/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign rsibreak/src/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu rsibreak/src/Makefile
-+ $(AUTOMAKE) --foreign rsibreak/src/Makefile
- cd $(top_srcdir) && perl admin/am_edit rsibreak/src/Makefile.in
-
-
++Her ihtimale karşı RSIBreak kullanın. Kesmeler boyunca eğer bir sayaç görmek istiyorsanız bu onay kutusu ile imleyebilirsiniz. Bu sıfıra doğru geriye sayacaktır, bu yüzden kesmenin ne kadar uzunlukta olacağını bilirsiniz. Resimler gösterildiği zaman, bu resmin üzerinde gösterilecektir. Kesmeler boyunca eğer bir sayaç görmek istiyorsanız bu onay kutusu ile imleyebilirsiniz. Bu sıfıra doğru geriye sayacaktır, bu yüzden kesmenin ne kadar uzunlukta olacağını bilirsiniz. Resimler gösterildiği zaman, bu resmin üzerinde gösterilecektir. aydin at kde.org.tr Aydın Demirel %1:%2 %1:00 %n dakika %n saniye Lütfen %n saniye için rahatlayın dakika saniye
+\ No newline at end of file
More information about the pkg-kde-commits
mailing list