Bug#458327: closed by martin f krafft <madduck at debian.org> (Re: Bug#458327: on reboot mdadm fails to mount all drives in a raid5 array)
richard
richard at mail.sheugh.com
Mon Dec 31 10:14:24 UTC 2007
On Sun, Dec 30, 2007 at 05:33:05PM +0000, Debian Bug Tracking System wrote:
> This is an automatic notification regarding your Bug report
> which was filed against the mdadm package:
>
> #458327: on reboot mdadm fails to mount all drives in a raid5 array
>
> It has been closed by martin f krafft <madduck at debian.org>.
>
SNIP
> No, this is what software RAID does. It provides run-time
> redundancy, not a guard against data loss. Use backups for that.
>
Good point. I may have to report two bugs instead of one. However,
I should have provided more information in my report on #458327,
and I will think about data loss. For #458327 please find below:
A) The state of one raid5 array before reboot
B) The state of the same raid5 array after reboot
C) A part copy of dmesg
I this is insufficient, please ask.
regards
Richard A Lough
#-----------------------------------------------------------------
# mdadm --misc --detail /dev/md3
/dev/md3:
Version : 00.90.03
Creation Time : Wed Aug 15 21:00:14 2007
Raid Level : raid5
Array Size : 293266432 (279.68 GiB 300.30 GB)
Used Dev Size : 146633216 (139.84 GiB 150.15 GB)
Raid Devices : 3
Total Devices : 3
Preferred Minor : 3
Persistence : Superblock is persistent
Update Time : Mon Dec 31 09:34:15 2007
State : clean
Active Devices : 3
Working Devices : 3
Failed Devices : 0
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 64K
UUID : 52db6426:52314f0e:3cde2480:e3073515
Events : 0.106492
Number Major Minor RaidDevice State
0 8 34 0 active sync /dev/sdc2
1 8 66 1 active sync /dev/sde2
2 8 50 2 active sync /dev/sdd2
#------------------------------------------------------------------
# mdadm --misc --detail /dev/md3
/dev/md3:
Version : 00.90.03
Creation Time : Wed Aug 15 21:00:14 2007
Raid Level : raid5
Array Size : 293266432 (279.68 GiB 300.30 GB)
Used Dev Size : 146633216 (139.84 GiB 150.15 GB)
Raid Devices : 3
Total Devices : 2
Preferred Minor : 3
Persistence : Superblock is persistent
Update Time : Mon Dec 31 09:46:33 2007
State : clean, degraded
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 64K
UUID : 52db6426:52314f0e:3cde2480:e3073515
Events : 0.106558
Number Major Minor RaidDevice State
0 8 34 0 active sync /dev/sdc2
1 8 66 1 active sync /dev/sde2
2 0 0 2 removed
#----------------------------------------------------------------------------
# part of dmesg
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x000000000001d480 ctl 0x000000000001d402 bmdma 0x000000000001cc00 irq 23
ata2: SATA max UDMA/133 cmd 0x000000000001d080 ctl 0x000000000001d002 bmdma 0x000000000001cc08 irq 23
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-6: WDC WD360GD-00FNA0, 35.06K35, max UDMA/133
ata1.00: 72303840 sectors, multi 16: LBA48
ata1.00: applying bridge limits
ata1.00: configured for UDMA/100
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-6: WDC WD360GD-00FNA0, 35.06K35, max UDMA/133
ata2.00: 72303840 sectors, multi 16: LBA48
ata2.00: applying bridge limits
ata2.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD360GD-00FN 35.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA WDC WD360GD-00FN 35.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 72303840 512-byte hardware sectors (37020 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 72303840 512-byte hardware sectors (37020 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg1 type 0
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:05.1 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x000000000001c880 ctl 0x000000000001c802 bmdma 0x000000000001c080 irq 22
ata4: SATA max UDMA/133 cmd 0x000000000001c480 ctl 0x000000000001c402 bmdma 0x000000000001c088 irq 22
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133
ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133
ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 3:0:0:0: Direct-Access ATA WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg3 type 0
ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:05.2 to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x000000000001c000 ctl 0x000000000001bc02 bmdma 0x000000000001b480 irq 21
ata6: SATA max UDMA/133 cmd 0x000000000001b880 ctl 0x000000000001b802 bmdma 0x000000000001b488 irq 21
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133
ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.00: configured for UDMA/133
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: Optiarc DVD RW AD-7170S, 1.00, max UDMA/66
ata6.00: configured for UDMA/66
scsi 4:0:0:0: Direct-Access ATA WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2
sd 4:0:0:0: [sde] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg4 type 0
scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7170S 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg5 type 5
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
INFTL: inftlcore.c $Revision: 1.19 $, inftlmount.c $Revision: 1.18 $
SSFDC read-only Flash Translation layer
pd: pd version 1.05, major 45, cluster 64, nice 0
pda: Autoprobe failed
pd: no valid drive found
pcd: pcd version 1.07, major 46, nice 0
pcd0: Autoprobe failed
pcd: No CD-ROM drive found
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:0b' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:0c' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: ImPS/2 Logitech Wheel Mouse as /class/input/input0
input: PC Speaker as /class/input/input1
Driver for 1-wire Dallas network protocol.
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int64x1 2014 MB/s
raid6: int64x2 2748 MB/s
raid6: int64x4 2643 MB/s
raid6: int64x8 1810 MB/s
raid6: sse2x1 3044 MB/s
raid6: sse2x2 3870 MB/s
raid6: sse2x4 4166 MB/s
raid6: using algorithm sse2x4 (4166 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: generic_sse
generic_sse: 6784.000 MB/sec
raid5: using function: generic_sse (6784.000 MB/sec)
md: multipath personality registered for level -4
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel at redhat.com
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
BIOS EDD facility v0.16 2004-Jun-25, 5 devices found
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sde2 ...
md: adding sde2 ...
md: sde1 has different UUID to sde2
md: adding sdc2 ...
md: sdc1 has different UUID to sde2
md: sdb3 has different UUID to sde2
md: sdb1 has different UUID to sde2
md: sda3 has different UUID to sde2
md: sda1 has different UUID to sde2
md: created md3
md: bind<sdc2>
md: bind<sde2>
md: running: <sde2><sdc2>
raid5: device sde2 operational as raid disk 1
raid5: device sdc2 operational as raid disk 0
raid5: allocated 3212kB for md3
raid5: raid level 5 set md3 active with 2 out of 3 devices, algorithm 2
RAID5 conf printout:
--- rd:3 wd:2
disk 0, o:1, dev:sdc2
disk 1, o:1, dev:sde2
md: considering sde1 ...
md: adding sde1 ...
md: adding sdc1 ...
md: sdb3 has different UUID to sde1
md: sdb1 has different UUID to sde1
md: sda3 has different UUID to sde1
md: sda1 has different UUID to sde1
md: created md2
md: bind<sdc1>
md: bind<sde1>
md: running: <sde1><sdc1>
raid5: device sde1 operational as raid disk 1
raid5: device sdc1 operational as raid disk 0
raid5: allocated 3212kB for md2
raid5: raid level 5 set md2 active with 2 out of 3 devices, algorithm 2
RAID5 conf printout:
--- rd:3 wd:2
disk 0, o:1, dev:sdc1
disk 1, o:1, dev:sde1
md: considering sdb3 ...
md: adding sdb3 ...
md: sdb1 has different UUID to sdb3
md: adding sda3 ...
md: sda1 has different UUID to sdb3
md: created md1
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 360k freed
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 20, io mem 0xf6ffac00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
Linux video capture interface: v2.00
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:08.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:08.0
ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:09.0 to 64
forcedeth: using HIGHDMA
cx2388x v4l2 driver version 0.0.6 loaded
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
eth1: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:09.0
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 21, io mem 0xf6ffb000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 19 (level, low) -> IRQ 19
CORE cx88[0]: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40,autodetected]
TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
tveeprom 2-0050: Hauppauge model 94009, rev C2A0, serial# 214269
tveeprom 2-0050: MAC address is 00-0D-FE-03-44-FD
tveeprom 2-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
tveeprom 2-0050: audio processor is CX882 (idx 33)
tveeprom 2-0050: decoder processor is CX882 (idx 25)
tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=94009
input: cx88 IR (Hauppauge WinTV-HVR110 as /class/input/input2
cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 19, latency: 64, mmio: 0xfa000000
tuner 2-0061: chip found @ 0xc2 (cx88[0])
tuner 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
tuner 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
usb 1-6: new high speed USB device using ehci_hcd and address 4
tuner 2-0063: chip found @ 0xc6 (cx88[0])
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 18
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fbfff800-fbffffff] Max Packet=[2048] IR/IT contexts=[4/8]
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNKC] -> GSI 19 (level, low) -> IRQ 19
cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 19, latency: 64, mmio: 0xf8000000
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:06.1 to 64
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
CORE cx88[0]: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40]
cx88[0]/2: cx2388x based dvb card
udev: renamed network interface eth1 to eth2
udev: renamed network interface eth0_rename to eth1
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
usb 1-6: configuration #1 chosen from 1 choice
hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
usb 2-3: new low speed USB device using ohci_hcd and address 2
cx2388x alsa driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:01:09.1[A] -> Link [LNKC] -> GSI 19 (level, low) -> IRQ 19
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
usb 2-3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: USB-compliant keyboard as /class/input/input3
input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:02.0-3
input: USB-compliant keyboard as /class/input/input4
input,hiddev96: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:02.0-3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0810000276b72]
Adding 891596k swap on /dev/sda2. Priority:-1 extents:1 across:891596k
Adding 891596k swap on /dev/sdb2. Priority:-2 extents:1 across:891596k
EXT3 FS on md0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on md2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tunl0: Disabled Privacy Extensions
# end of dmesg
#----------------------------------------------------------------
More information about the pkg-mdadm-devel
mailing list