[Pkg-net-snmp-commits] r107 - in trunk/debian: manpages patches
Jochen Friedrich
jochen at alioth.debian.org
Fri Nov 24 13:24:11 CET 2006
Author: jochen
Date: 2006-11-24 13:24:11 +0100 (Fri, 24 Nov 2006)
New Revision: 107
Removed:
trunk/debian/manpages/encode_keychange.1
trunk/debian/manpages/fixproc.1
trunk/debian/manpages/mib2c-update.1
trunk/debian/manpages/snmpnetstat53.1
trunk/debian/manpages/snmpvacm.1
trunk/debian/manpages/tkmib.1
trunk/debian/manpages/traptoemail.1
Modified:
trunk/debian/patches/07_docfiles.patch
Log:
Remove manpages and patches included in upstream source.
Deleted: trunk/debian/manpages/encode_keychange.1
===================================================================
--- trunk/debian/manpages/encode_keychange.1 2006-11-24 12:23:26 UTC (rev 106)
+++ trunk/debian/manpages/encode_keychange.1 2006-11-24 12:24:11 UTC (rev 107)
@@ -1,72 +0,0 @@
-.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.33.
-.TH encode_keychange "1" "September 2003" "encode_keychange"
-.SH NAME
-encode_keychange - produce the KeyChange string for SNMPv3
-.SH SYNOPSIS
-.B encode_keychange
--t md5|sha1
-[\fIOPTIONS\fR]
-.SH DESCRIPTION
-.B encode_keychange
-produces a KeyChange string using the old and new passphrases
-as described in Section 5 of RFC 2274 "User-based Security Model (USM) for
-version 3 of the Simple Network Management Protocol (SNMPv3)". \fB-t\fR
-option is mandatory and specifies the hash transform type to use.
-
-The transform is used to convert passphrase to master key for a given
-user (Ku), convert master key to the localized key (Kul), and to hash the
-old Kul with the random bits.
-
-Passphrases are obtained by examining a number of sources until success
-(in order listed):
-.IP
-command line options (see
-.B -N
-and
-.B -O
-options below);
-.IP
-the file
-.B $HOME/.snmp/passphrase.ek
-which should only contain two lines with old and new passphrase;
-.IP
-standard input \fB\-or\-\fR user input from the terminal.
-.PP
-
-.SH OPTIONS
-.TP
-\fB\-E\fR [0x]<\fIengineID\fR> EngineID used for Kul generation.
-<\fIengineID\fR> is intepreted as a hex string when preceeded by 0x,
-otherwise it is treated as a text string. If no <\fIengineID\fR> is
-specified, it is constructed from the first IP address for the local
-host.
-.TP
-\fB\-f\fR
-Force passphrases to be read from standard input.
-.TP
-\fB\-h\fR
-Display the help message.
-.TP
-\fB\-N\fR "<\fInew_passphrase\fR>"
-Passphrase used to generate the new Ku.
-.TP
-\fB\-O\fR "<\fIold_passphrase\fR>"
-Passphrase used to generate the old Ku.
-.TP
-\fB\-P\fR
-Turn off the prompt for passphrases when getting data from standard input.
-.TP
-\fB\-v\fR
-Be verbose.
-.TP
-\fB\-V\fR
-Echo passphrases to terminal.
-.PP
-
-.SH "SEE ALSO"
-The localized key method is defined in RFC 2274, Sections 2.6 and A.2, and
-originally documented in
-.IP
-U. Blumenthal, N. C. Hien, B. Wijnen,
-"Key Derivation for Network Management Applications",
-IEEE Network Magazine, April/May issue, 1997.
Deleted: trunk/debian/manpages/fixproc.1
===================================================================
--- trunk/debian/manpages/fixproc.1 2006-11-24 12:23:26 UTC (rev 106)
+++ trunk/debian/manpages/fixproc.1 2006-11-24 12:24:11 UTC (rev 107)
@@ -1,40 +0,0 @@
-.TH fixproc "1" "July 2005" "fixproc" "User Commands"
-.SH NAME
-fixproc - Fixes a process by performing the specified action.
-.SH SYNOPSIS
-.PP
-.B fixproc
-[\fI\-min n\fR]
-[\fI\-max n\fR]
-[\fI\-check | \-kill | \-restart | \-exist | \-fix\fR]
-proc \.\.\.
-.SH DESCRIPTION
-.PP
-Fixes a process named "proc" by performing the specified action. The
-actions can be check, kill, restart, exist, or fix. The action is specified
-on the command line or is read from a default database, which describes
-the default action to take for each process. The database format and
-the meaning of each action are described below.
-.SH OPTIONS
-.TP
-.B \-min n
-minimum number of processes that should be running, defaults to 1
-.TP
-.B \-max n
-maximum number of processes that should be running, defaults to 1
-.TP
-.B \-check
-check process against database /local/etc/fixproc.conf.
-.TP
-.B \-kill
-kill process, wait 5 seconds, kill -9 if still exist
-.TP
-.B \-restart
-kill process, wait 5 seconds, kill -9 if still exist, then start again
-.TP
-.B \-exist
-checks if proc exists in ps && (min <= num. of processes <= max)
-.TP
-.B \-fix
-check process against database /local/etc/fixproc.conf. Perform defined
-action, if check fails.
Deleted: trunk/debian/manpages/mib2c-update.1
===================================================================
--- trunk/debian/manpages/mib2c-update.1 2006-11-24 12:23:26 UTC (rev 106)
+++ trunk/debian/manpages/mib2c-update.1 2006-11-24 12:24:11 UTC (rev 107)
@@ -1,9 +0,0 @@
-.TH mib2c-update "1" "July 2005" "mib2c-update" "User Commands"
-.SH NAME
-mib2c-update - script to merge custom code into updated mib2c code
-.SH SYNOPSIS
-.PP
-.B mib2c-update
-.SH DESCRIPTION
-.PP
-merges custom code into updated mib2c code
Deleted: trunk/debian/manpages/snmpnetstat53.1
===================================================================
--- trunk/debian/manpages/snmpnetstat53.1 2006-11-24 12:23:26 UTC (rev 106)
+++ trunk/debian/manpages/snmpnetstat53.1 2006-11-24 12:24:11 UTC (rev 107)
@@ -1,304 +0,0 @@
-.\" Portions of this file are subject to the following copyright. See
-.\" the Net-SNMP's COPYING file for more details and other copyrights
-.\" that may apply:
-.\" /***********************************************************
-.\" Copyright 1989 by Carnegie Mellon University
-.\"
-.\" All Rights Reserved
-.\"
-.\" Permission to use, copy, modify, and distribute this software and its
-.\" documentation for any purpose and without fee is hereby granted,
-.\" provided that the above copyright notice appear in all copies and that
-.\" both that copyright notice and this permission notice appear in
-.\" supporting documentation, and that the name of CMU not be
-.\" used in advertising or publicity pertaining to distribution of the
-.\" software without specific, written prior permission.
-.\"
-.\" CMU DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
-.\" ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
-.\" CMU BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
-.\" ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-.\" WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
-.\" ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-.\" SOFTWARE.
-.\" ******************************************************************/
-.\"
-.\" Copyright (c) 1983, 1988, 1993
-.\" The Regents of the University of California. All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. Neither the name of the University nor the names of its contributors
-.\" may be used to endorse or promote products derived from this software
-.\" without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" @(#)netstat.1 6.8 (Berkeley) 9/20/88
-.\"
-.\" /***********************************************************
-.\" Portions of this file are copyrighted by:
-.\" Copyright Copyright 2003 Sun Microsystems, Inc. All rights reserved.
-.\" Use is subject to license terms specified in the COPYING file
-.\" distributed with the Net-SNMP package.
-.\" ******************************************************************/
-.TH SNMPNETSTAT 1 "25 Oct 2003" V5.2.2 "Net-SNMP"
-.UC 5
-.SH NAME
-snmpnetstat53 \- display networking status and configuration information from a network entity via SNMP
-.SH SYNOPSIS
-.B snmpnetstat53
-[common options] [-Ca] [-Cn] AGENT
-.br
-.B snmpnetstat53
-[common options] [-Ci] [-Co] [-Cr] [-Cn] [-Cs] AGENT
-.br
-.B snmpnetstat53
-[common options] [-Ci] [-Cn] [-CI interface] AGENT [interval]
-.br
-.B snmpnetstat53
-[common options] [-Ca] [-Cn] [-Cs] [-CP protocol] AGENT
-.SH DESCRIPTION
-The
-.B snmpnetstat53
-command symbolically displays the values of various network-related
-information retrieved from a remote system using the SNMP protocol.
-There are a number of output formats,
-depending on the options for the information presented.
-The first form of the command displays a list of active sockets.
-The second form presents the values of other network-related
-information according to the option selected.
-Using the third form, with an
-.I interval
-specified,
-.I snmpnetstat53
-will continuously display the information regarding packet
-traffic on the configured network interfaces.
-The fourth form displays statistics about the named protocol.
-.PP
-AGENT identifies a target SNMP agent, which is
-instrumented to monitor the given objects.
-At its simplest, the AGENT specification will
-consist of a hostname or an IPv4 address. In this
-situation, the command will attempt communication
-with the agent, using UDP/IPv4 to port 161 of the
-given target host. See snmpcmd(1) for a full list of
-the possible formats for AGENT.
-.PP
-.SH OPTIONS
-The options have the following meaning:
-.PP
-.B common options
- Please see
-.I snmpcmd(1)
-for a list of possible values for common options
-as well as their descriptions.
-.PP
-.B \-Ca
-With the default display,
-show the state of all sockets; normally sockets used by
-server processes are not shown.
-.PP
-.B \-Ci
-Show the state of all of the network interfaces.
-The interface display provides a table of cumulative
-statistics regarding packets transferred, errors, and collisions.
-The network addresses of the interface and the maximum transmission
-unit (``mtu'') are also displayed.
-.PP
-.B \-Co
-Show an abbreviated interface status, giving octets in place of packets.
-This is useful when enquiring virtual interfaces (such as Frame-Relay circuits)
-on a router.
-.PP
-.BI \-CI " interface"
-Show information only about this interface;
-used with an
-.I interval
-as described below.
-.PP
-.B \-Cn
-Show network addresses as numbers (normally
-.I snmpnetstat53
-interprets addresses and attempts to display them
-symbolically).
-This option may be used with any of the display formats.
-.PP
-.BI \-CP " protocol"
-Show statistics about
-.IR protocol,
-which is either a well-known name for a protocol or an alias for it. Some
-protocol names and aliases are listed in the file
-.IR /etc/protocols .
-A null response typically means that there are no interesting numbers to
-report.
-The program will complain if
-.I protocol
-is unknown or if there is no statistics routine for it.
-.PP
-.B \-Cs
-Show per-protocol statistics. When used with the
-.B \-Cr
-option, show routing statistics instead.
-.PP
-.B \-Cr
-Show the routing tables.
-When
-.B \-Cs
-is also present, show per-protocol routing statistics instead of
-the routing tables.
-.PP
-When snmpnetstat53 is invoked with an interval argument, it
-displays a running count of statistics related to network
-interfaces.
-.I interval
-is the number of seconds between
-reporting of statistics.
-.PP
-.I The Active Sockets Display (default)
-.PP
-The default display, for active sockets, shows the local
-and remote addresses, protocol, and the internal state of
-the protocol. Address formats are of the form
-``host.port'' or ``network.port'' if a socket's address
-specifies a network but no specific host address. When
-known, the host and network addresses are displayed symbolically
-according to the data bases
-.I /etc/hosts and
-.IR /etc/networks,
-respectively. If a symbolic name for an
-address is unknown, or if the
-.B \-Cn
-option is specified, the
-address is printed numerically, according to the address
-family. For more information regarding the Internet ``dot
-format,'' refer to
-.IR inet(3N).
-Unspecified, or ``wildcard'', addresses and ports appear as ``*''.
-.PP
-.I The Interface Display
-.PP
-The interface display provides a table of cumulative
-statistics regarding packets transferred, errors, and col-
-lisions. The network addresses of the interface and the
-maximum transmission unit (``mtu'') are also displayed.
-.PP
-.I The Routing Table Display
-.PP
-The routing table display indicates the available routes
-and their status. Each route consists of a destination
-host or network and a gateway to use in forwarding pack-
-ets. The flags field shows the state of the route (``U''
-if ``up''), whether the route is to a gateway (``G''),
-whether the route was created dynamically by a redirect
-(``D''), and whether the route has been modified by a
-redirect (``M''). Direct routes are created for each
-interface attached to the local host; the gateway field
-for such entries shows the address of the outgoing inter-
-face. The interface entry indicates the network interface
-utilized for the route.
-.PP
-.I The Interface Display with an Interval
-.PP
-When
-.I snmpnetstat53
-is invoked with an
-.I interval
-argument, it
-displays a running count of statistics related to network
-interfaces. This display consists of a column for the
-primary interface and a column summarizing information for
-all interfaces. The primary interface may be replaced
-with another interface with the
-.B \-CI
-option. The first line
-of each screen of information contains a summary since the
-system was last rebooted. Subsequent lines of output show
-values accumulated over the preceding interval.
-.PP
-.I The Active Sockets Display for a
-.I Single Protocol
-.PP
-When a protocol is specified with the
-.B \-CP
-option, the
-information displayed is similar to that in the
-default display for active sockets, except the
-display is limited to the given protocol.
-.SH EXAMPLES
-Example of using snmpnetstat53 to displaly active sockets (default):
-.PP
-% snmpnetstat53 -v 2c -c public -Ca testhost
-.PP
-.nf
-Active Internet (tcp) Connections (including servers)
-Proto Local Address Foreign Address (state)
-tcp *.echo *.* LISTEN
-tcp *.discard *.* LISTEN
-tcp *.daytime *.* LISTEN
-tcp *.chargen *.* LISTEN
-tcp *.ftp *.* LISTEN
-tcp *.telnet *.* LISTEN
-tcp *.smtp *.* LISTEN
-\&...
-
-Active Internet (udp) Connections
-Proto Local Address
-udp *.echo
-udp *.discard
-udp *.daytime
-udp *.chargen
-udp *.time
-\&...
-.fi
-.PP
-% snmpnetstat53 -v 2c -c public -Ci testhost
-.PP
-.nf
-Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Queue
-eri0 1500 10.6.9/24 testhost 170548881 245601 687976 0 0
-lo0 8232 127 localhost 7530982 0 7530982 0 0
-.fi
-.PP
-Example of using snmpnetstat53 to show statistics about a specific protocol:
-.PP
-.nf
-% snmpnetstat53 -v 2c -c public -CP tcp testhost
-
-Active Internet (tcp) Connections
-Proto Local Address Foreign Address (state)
-tcp *.echo *.* LISTEN
-tcp *.discard *.* LISTEN
-tcp *.daytime *.* LISTEN
-tcp *.chargen *.* LISTEN
-tcp *.ftp *.* LISTEN
-tcp *.telnet *.* LISTEN
-tcp *.smtp *.* LISTEN
-\&...
-.fi
-.SH SEE ALSO
-snmpcmd(1),
-iostat(1),
-vmstat(1),
-hosts(5),
-networks(5),
-protocols(5),
-services(5).
-.SH BUGS
-The notion of errors is ill-defined.
Deleted: trunk/debian/manpages/snmpvacm.1
===================================================================
--- trunk/debian/manpages/snmpvacm.1 2006-11-24 12:23:26 UTC (rev 106)
+++ trunk/debian/manpages/snmpvacm.1 2006-11-24 12:24:11 UTC (rev 107)
@@ -1,34 +0,0 @@
-.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.33.
-.TH snmpvacm "1" "September 2003" "snmpvacm" "User Commands"
-.SH NAME
-snmpvacm - send SNMP requests to a network entity to change VACM database
-.SH SYNOPSIS
-.PP
-.B snmpvacm
-[\fICOMMON OPTIONS\fR] \fIAGENT\fR \fICOMMAND\fR
-.SH DESCRIPTION
-.PP
-\fBsnmpvacm\fR is the Simple Network Management Protocol (SNMP)
-application for sending SNMP requests to the network entity with the
-intention of modifying the information stored in the View-based Access
-Control Model (VACM) database. VACM is desribed in detail in RFC 2275
-"View-based Access Control Model (VACM) for the Simple Network
-Management Protocol (SNMP)". For the common options supported by
-\fBsnmpvacm\fR see the snmpcmd(1) man page.
-
-.SH COMMANDS
-.TP
-createAccess \fIGROUPNAME\fR [\fICONTEXTPREFIX\fR] \fISECURITYMODEL\fR \fISECURITYLEVEL\fR \fICONTEXTMATCH\fR \fIREADVIEWNAME\fR \fIWRITEVIEWNAME\fR \fINOTIFYVIEWNAME\fR
-.TP
-deleteAccess \fIGROUPNAME\fR [\fICONTEXTPREFIX\fR] \fISECURITYMODEL\fR \fISECURITYLEVEL\fR
-.TP
-createSec2Group \fIMODEL\fR \fISECURITYNAME\fR \fIGROUPNAME\fR
-.TP
-deleteSec2Group \fIMODEL\fR \fISECURITYNAME\fR
-.TP
-[-Ce] createView \fINAME\fR \fISUBTREE\fR \fIMASK\fR
-.TP
-deleteView \fINAME\fR \fISUBTREE\fR
-
-.SH SEE ALSO
-snmpcmd(1), \fBACCESS CONTROL\fR section of snmpd.conf(5)
Deleted: trunk/debian/manpages/tkmib.1
===================================================================
--- trunk/debian/manpages/tkmib.1 2006-11-24 12:23:26 UTC (rev 106)
+++ trunk/debian/manpages/tkmib.1 2006-11-24 12:24:11 UTC (rev 107)
@@ -1,15 +0,0 @@
-.TH tkmib "1" "September 2003" "tkmib" "User Commands"
-.SH NAME
-tkmib - an interactive graphical MIB browser for SNMP
-.SH SYNOPSIS
-.PP
-.B tkmib
-.SH DESCRIPTION
-.PP
-Simple Network Management Protocol (SNMP) provides a framework for
-exchange of the management information between the agents (servers)
-and clients. The Management Information Bases (MIBs) contain a formal
-description of a set of network objects that can be managed using the
-SNMP for a particular agent. \fBtkmib\fR is a graphical user interface
-for browsing the MIBs. It is also capable of sending or retrieving the
-SNMP management information to/from the remote agents interactively.
Deleted: trunk/debian/manpages/traptoemail.1
===================================================================
--- trunk/debian/manpages/traptoemail.1 2006-11-24 12:23:26 UTC (rev 106)
+++ trunk/debian/manpages/traptoemail.1 2006-11-24 12:24:11 UTC (rev 107)
@@ -1,22 +0,0 @@
-.TH traptoemail "1" "July 2005" "traptoemail" "User Commands"
-.SH NAME
-traptoemail - snmptrapd handler script to convert snmp traps into emails
-.SH SYNOPSIS
-.PP
-.B traptoemail
-[\fI\-f FROM\fR]
-[\fI\-s SMTPSERVER\fR]
-ADDRESSES
-.SH DESCRIPTION
-.PP
-converts snmp traps into email messages.
-.SH OPTIONS
-.TP
-.B \-f FROM
-sender address, defaults to "root"
-.TP
-.B \-s SMTPSERVER
-SMTP server, defaults to "localhost"
-.TP
-.B ADDRESSES
-recipient addresses
Modified: trunk/debian/patches/07_docfiles.patch
===================================================================
--- trunk/debian/patches/07_docfiles.patch 2006-11-24 12:23:26 UTC (rev 106)
+++ trunk/debian/patches/07_docfiles.patch 2006-11-24 12:24:11 UTC (rev 107)
@@ -12,29 +12,6 @@
Running mib2c without the -c CONFIGFILE option will display
a description of the valid values for CONFIGFILE, that is,
the available config files, including new ones that you might
---- net-snmp-5.1.2.orig/man/snmpset.1.def
-+++ net-snmp-5.1.2/man/snmpset.1.def
-@@ -73,7 +73,7 @@
- .PD
- .RE
- Most of these will use the obvious corresponding ASN.1 type.
--'s', 'x', 'd' and 'b' are all different ways of specifying an OCTET STRING
-+\&'s', 'x', 'd' and 'b' are all different ways of specifying an OCTET STRING
- value, and the 'u' unsigned type is also used for handling Gauge32 values.
- .PP
- If you have the proper MIB file loaded, you can, in most cases, replace the
---- net-snmp-5.1.2.orig/man/snmp_trap_api.3.def
-+++ net-snmp-5.1.2/man/snmp_trap_api.3.def
-@@ -1,8 +1,7 @@
- .TH SNMP_TRAP_API 3 "7 Mar 2002" VVERSIONINFO "Net-SNMP"
- .UC 5
- .SH NAME
--send_easy_trap, send_trap_vars, send_v2trap - send TRAPs or INFORMs
--from a Net-SNMP MIB module
-+send_easy_trap, send_trap_vars, send_v2trap - send TRAPs or INFORMs from a Net-SNMP MIB module
- .SH SYNOPSIS
- .B #include <net-snmp/agent/agent_trap.h>
- .PP
--- net-snmp-5.1.2.orig/man/snmp_config.5.def
+++ net-snmp-5.1.2/man/snmp_config.5.def
@@ -11,7 +11,7 @@
More information about the Pkg-net-snmp-commits
mailing list