[Pkg-net-snmp-devel] Bug#649120: lmsensors module makes snmpd choke and eventually die
Jean Robertson
jean.robertson at mcgill.ca
Thu Nov 17 20:32:32 UTC 2011
Package: snmpd
Version: 5.4.3~dfsg-2
Severity: normal
the only way to keep the snmpd daemon responding is to turn off lmsensors module with a "snmpd -I -lmsensors" configuration change.
By default lmsensors is turned on.
When it starts up, it responds, but then slows down and eventually dies.
-- System Information:
Debian Release: 6.0.3
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_CA.utf8)
Shell: /bin/sh linked to /bin/dash
Versions of packages snmpd depends on:
ii adduser 3.112+nmu2 add and remove users and groups
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib
ii libsnmp15 5.4.3~dfsg-2 SNMP (Simple Network Management Pr
ii libwrap0 7.6.q-19 Wietse Venema's TCP wrappers libra
ii lsb-base 3.2-23.2squeeze1 Linux Standard Base 3.2 init scrip
snmpd recommends no packages.
snmpd suggests no packages.
-- Configuration Files:
/etc/default/snmpd changed:
export MIBS=/usr/share/mibs
SNMPDRUN=yes
SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -g snmp -I -lmSensors -p /var/run/snmpd.pid netnode8.ece.mcgill.ca'
TRAPDRUN=no
TRAPDOPTS='-Lsd -p /var/run/snmptrapd.pid'
SNMPDCOMPAT=yes
/etc/snmp/snmpd.conf changed:
# system + hrSystem groups only
view systemonly included .1.3.6.1.2.1.1
view systemonly included .1.3.6.1.2.1.25.1
# Full access from the local host
# Default access to basic system info
rocommunity public default -V systemonly
# Full access from an example network
# Adjust this network address to match your local
# settings, change the community string,
# and check the 'agentAddress' setting above
# Full read-only access for SNMPv3
rouser authOnlyUser
# Full write access for encrypted requests
# Remember to activate the 'createUser' lines above
sysLocation Sitting on the Dock of the Bay
sysContact Me <me at example.org>
# Application + End-to-End layers
sysServices 72
# At least one 'mountd' process
proc mountd
# No more than 4 'ntalkd' processes - 0 is OK
proc ntalkd 4
# At least one 'sendmail' process, but no more than 10
proc sendmail 10 1
# 10MBs required on root disk, 5% free on /var, 10% free on all other disks
disk / 10000
disk /var 5%
includeAllDisks 10%
# Unacceptable 1-, 5-, and 15-minute load averages
load 12 10 5
# send SNMPv1 traps
trapsink localhost public
# send SNMPv2c traps
# send SNMPv2c INFORMs
# Remember to activate the 'createUser' lines above
iquerySecName internalUser
rouser internalUser
# generate traps on UCD error conditions
defaultMonitors yes
# generate traps on linkUp/Down
linkUpDownNotifications yes
extend test1 /bin/echo Hello, world!
extend-sh test2 echo Hello, world! ; echo Hi there ; exit 35
# Run as an AgentX master agent
master agentx
# Listen for network connections (from localhost)
# rather than the default named socket /var/agentx/master
-- debconf information:
snmpd/upgradefrom521:
More information about the Pkg-net-snmp-devel
mailing list