Bug#675426: error on eth1

[Petr Grigoriev]

error on eth1

#mii-tool
eth0: negotiated 1000baseT-FD flow-control, link ok
SIOCGMIIPHY on 'eth1' failed: Operation not supported

#ethtool eth1
Settings for eth1:
        Supported ports: [ MII ]
        Supported link modes:   10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
        Advertised pause frame use: No
        Advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 1
        Transceiver: external
        Auto-negotiation: on
        Supports Wake-on: g
        Wake-on: d
        Link detected: yes

#dmesg | grep -i eth
[    1.422100] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.422323] forcedeth 0000:00:05.0: PCI INT A -> Link[APCH] -> GSI 20 (level, high) -> IRQ 20
[    1.422334] forcedeth 0000:00:05.0: setting latency timer to 64
[    1.650879] skge 0000:02:07.0: eth0: addr 00:17:9a:b3:95:8e
[    1.945047] forcedeth 0000:00:05.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:04:61:0c:be:91
[    1.945062] forcedeth 0000:00:05.0: csum timirq lnktim desc-v2
[   39.932676] skge 0000:02:07.0: eth0: enabling interface
[   42.277567] skge 0000:02:07.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
[   50.088007] eth1: no IPv6 routers present
[   50.144007] eth0: no IPv6 routers present
[   73.128816] forcedeth 0000:00:05.0: eth1: link down
[   80.203622] forcedeth 0000:00:05.0: eth1: link up

# lspci
00:00.0 Host bridge: NVIDIA Corporation nForce3 250Gb Host Bridge (rev a1)
00:01.0 ISA bridge: NVIDIA Corporation nForce3 250Gb LPC Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation nForce 250Gb PCI System Management (rev a1)
00:02.0 USB controller: NVIDIA Corporation CK8S USB Controller (rev a1)
00:02.1 USB controller: NVIDIA Corporation CK8S USB Controller (rev a1)
00:02.2 USB controller: NVIDIA Corporation nForce3 EHCI USB 2.0 Controller (rev a2)
00:05.0 Bridge: NVIDIA Corporation CK8S Ethernet Controller (rev a2)
00:06.0 Multimedia audio controller: NVIDIA Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
00:08.0 IDE interface: NVIDIA Corporation CK8S Parallel ATA Controller (v2.5) (rev a2)
00:0a.0 IDE interface: NVIDIA Corporation nForce3 Serial ATA Controller (rev a2)
00:0b.0 PCI bridge: NVIDIA Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2)
00:0e.0 PCI bridge: NVIDIA Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
02:07.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11)



-- 
Ñ óâà æåíèåì,
 Petr                          mailto:unicorp99 at hotbox.ru