From andrewsh at debian.org Mon Mar 2 09:15:22 2015 From: andrewsh at debian.org (Andrew Shadura) Date: Mon, 02 Mar 2015 10:15:22 +0100 Subject: Bug#779556: pulseaudio creates .config/pulse in a root directory Message-ID: <20150302091522.9994.13219.reportbug@localhost.localdomain> Package: pulseaudio Version: 5.0-4 Severity: normal I haven't notices when exactly does this happen, but after a while, I see a /.config directory with pulseaudio config inside. Happens on at least two different machines with slightly different versions and different configurations. -- Package-specific info: File '/etc/default/pulseaudio' does not exist -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.12-1-686-pae (SMP w/4 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8) Shell: /bin/sh linked to /bin/mksh Versions of packages pulseaudio depends on: ii adduser 3.112+nmu1 ii libasound2 1.0.27.2-3 ii libasound2-plugins 1.0.24-2 ii libc6 2.19-13 ii libcap2 1:2.24-6 ii libdbus-1-3 1.6.18-1 ii libfftw3-single3 3.3.3-5 ii libgcc1 1:4.9.2-7 ii libice6 2:1.0.5-1 ii libltdl7 2.4.2-1 ii liborc-0.4-0 1:0.4.21-1 ii libpulse0 5.0-4 ii libsamplerate0 0.1.7-2 ii libsm6 2:1.1.0-2 ii libsndfile1 1.0.25-9 ii libspeexdsp1 1.2~rc1-1 ii libstdc++6 4.9.2-7 ii libsystemd-login0 208-6 ii libtdb1 1.2.12-1 ii libudev1 215-10 ii libwebrtc-audio-processing-0 0.1-2 ii libx11-6 2:1.6.2-3 ii libx11-xcb1 2:1.4.1-4 ii libxcb1 1.10-3+b1 ii libxtst6 2:1.1.0-3 ii lsb-base 4.1+Debian13 ii pulseaudio-utils 5.0-4 ii udev 215-10 Versions of packages pulseaudio recommends: ii pulseaudio-module-x11 5.0-4 pn rtkit Versions of packages pulseaudio suggests: ii paman 0.9.4-1 pn paprefs ii pavucontrol 2.0-3 ii pavumeter 0.9.3-4 -- Configuration Files: /etc/pulse/default.pa changed: ..nofail ..fail load-module module-device-restore load-module module-stream-restore load-module module-card-restore load-module module-augment-properties load-module module-switch-on-port-available load-module module-alsa-sink device=dmix load-module module-alsa-source device=dsnoop ..ifexists module-udev-detect.so ..else load-module module-detect ..endif ..ifexists module-jackdbus-detect.so ..nofail load-module module-jackdbus-detect channels=2 ..fail ..endif ..ifexists module-bluetooth-policy.so load-module module-bluetooth-policy ..endif ..ifexists module-bluetooth-discover.so load-module module-bluetooth-discover ..endif ..ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix ..endif load-module module-native-protocol-unix ..ifexists module-gconf.so ..nofail load-module module-gconf ..fail ..endif load-module module-default-device-restore load-module module-rescue-streams load-module module-always-sink load-module module-intended-roles load-module module-suspend-on-idle load-module module-position-event-sounds load-module module-role-cork load-module module-filter-heuristics load-module module-filter-apply ..ifexists module-x11-publish.so load-module module-x11-publish ..endif -- no debconf information -------------- next part -------------- # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for PulseAudio clients. See pulse-client.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; default-sink = ; default-source = ; default-server = ; default-dbus-server = ; autospawn = yes ; daemon-binary = /usr/bin/pulseaudio ; extra-arguments = --log-target=syslog ; cookie-file = ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; auto-connect-localhost = no ; auto-connect-display = no -------------- next part -------------- # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 # resample-method defaults to speex-float-1 on most architectures, # speex-fixed-1 on ARM ; resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no ; flat-volumes = yes ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; alternate-sample-rate = 48000 ; default-sample-channels = 2 ; default-channel-map = front-left,front-right ; default-fragments = 4 ; default-fragment-size-msec = 25 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0 -------------- next part -------------- #!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software Foundation, # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) ..nofail ### Load something into the sample cache #load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav #load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav #load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav #load-sample-lazy pulse-access /usr/share/sounds/generic.wav ..fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Should be after module-*-restore but before module-*-detect load-module module-switch-on-port-available ### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) load-module module-alsa-sink device=dmix load-module module-alsa-source device=dsnoop #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available ..ifexists module-udev-detect.so #load-module module-udev-detect ..else ### Use the static hardware detection module (for systems that lack udev support) load-module module-detect ..endif ### Automatically connect sink and source if JACK server is present ..ifexists module-jackdbus-detect.so ..nofail load-module module-jackdbus-detect channels=2 ..fail ..endif ### Automatically load driver modules for Bluetooth hardware ..ifexists module-bluetooth-policy.so load-module module-bluetooth-policy ..endif ..ifexists module-bluetooth-discover.so load-module module-bluetooth-discover ..endif ### Load several protocols ..ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix ..endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp #load-module module-zeroconf-publish ### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. ..ifexists module-gconf.so ..nofail load-module module-gconf ..fail ..endif ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. #.ifexists module-console-kit.so #load-module module-console-kit #.endif #.ifexists module-systemd-login.so #load-module module-systemd-login #.endif ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music/video streams when a phone stream is active load-module module-role-cork ### Modules to allow autoloading of filters (such as echo cancellation) ### on demand. module-filter-heuristics tries to determine what filters ### make sense, and module-filter-apply does the heavy-lifting of ### loading modules and rerouting streams. load-module module-filter-heuristics load-module module-filter-apply # X11 modules should not be started from default.pa so that one daemon # can be shared by multiple sessions. ### Load X11 bell module #load-module module-x11-bell sample=bell-windowing-system ### Register ourselves in the X11 session manager #load-module module-x11-xsmp ### Publish connection data in the X11 root window ..ifexists module-x11-publish.so #.nofail load-module module-x11-publish #.fail ..endif ### Make some devices default #set-default-sink output #set-default-source input -------------- next part -------------- #!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software Foundation, # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. # This startup script is used only if PulseAudio is started in system # mode. ### Automatically load driver modules depending on the hardware available ..ifexists module-udev-detect.so load-module module-udev-detect ..else ### Use the static hardware detection module (for systems that lack udev/hal support) load-module module-detect ..endif ### Load several protocols ..ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix ..endif load-module module-native-protocol-unix ### Automatically restore the volume of streams and devices load-module module-stream-restore load-module module-device-restore ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### Enable positioned event sounds load-module module-position-event-sounds -------------- next part -------------- null Discard all samples (playback) or generate zero samples (capture) default:CARD=Intel HDA Intel, 92HD81B1X5 Analog Default Audio Device sysdefault:CARD=Intel HDA Intel, 92HD81B1X5 Analog Default Audio Device front:CARD=Intel,DEV=0 HDA Intel, 92HD81B1X5 Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, 92HD81B1X5 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, 92HD81B1X5 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, 92HD81B1X5 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, 92HD81B1X5 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, 92HD81B1X5 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers hdmi:CARD=Intel,DEV=0 HDA Intel, HDMI 0 HDMI Audio Output hdmi:CARD=Intel,DEV=1 HDA Intel, HDMI 1 HDMI Audio Output hdmi:CARD=Intel,DEV=2 HDA Intel, HDMI 2 HDMI Audio Output default:CARD=pcsp pcsp, pcsp Default Audio Device sysdefault:CARD=pcsp pcsp, pcsp Default Audio Device front:CARD=pcsp,DEV=0 pcsp, pcsp Front speakers -------------- next part -------------- Sink #0 State: SUSPENDED Name: alsa_output.dmix Description: Built-in Audio Driver: module-alsa-sink.c Sample Specification: s32le 2ch 48000Hz Channel Map: front-left,front-right Owner Module: 5 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor Source: alsa_output.dmix.monitor Latency: 0 usec, configured 0 usec Flags: HARDWARE DECIBEL_VOLUME LATENCY Properties: alsa.resolution_bits = "32" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "92HD81B1X5 Analog" alsa.id = "92HD81B1X5 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0xf5460000 irq 44" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "3b57" device.product.name = "5 Series/3400 Series Chipset High Definition Audio" device.form_factor = "internal" device.string = "dmix" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "8192" device.access_mode = "mmap+timer" device.description = "Built-in Audio" device.icon_name = "audio-card-pci" Formats: pcm -------------- next part -------------- Source #0 State: SUSPENDED Name: alsa_output.dmix.monitor Description: Monitor of Built-in Audio Driver: module-alsa-sink.c Sample Specification: s32le 2ch 48000Hz Channel Map: front-left,front-right Owner Module: 5 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: alsa_output.dmix Latency: 0 usec, configured 0 usec Flags: DECIBEL_VOLUME LATENCY Properties: device.description = "Monitor of Built-in Audio" device.class = "monitor" device.icon_name = "audio-input-microphone" Formats: pcm Source #1 State: SUSPENDED Name: alsa_input.dsnoop Description: Built-in Audio Driver: module-alsa-source.c Sample Specification: s32le 2ch 48000Hz Channel Map: front-left,front-right Owner Module: 6 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: n/a Latency: 0 usec, configured 0 usec Flags: HARDWARE DECIBEL_VOLUME LATENCY Properties: alsa.resolution_bits = "32" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "92HD81B1X5 Analog" alsa.id = "92HD81B1X5 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0xf5460000 irq 44" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "3b57" device.product.name = "5 Series/3400 Series Chipset High Definition Audio" device.form_factor = "internal" device.string = "dsnoop" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "8192" device.access_mode = "mmap+timer" device.description = "Built-in Audio" device.icon_name = "audio-input-microphone-pci" Formats: pcm -------------- next part -------------- Module #0 Name: module-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute state of devices" module.version = "5.0" Module #1 Name: module-stream-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute/device state of streams" module.version = "5.0" Module #2 Name: module-card-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore profile of cards" module.version = "5.0" Module #3 Name: module-augment-properties Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Augment the property sets of streams with additional static information" module.version = "5.0" Module #4 Name: module-switch-on-port-available Argument: Usage counter: n/a Properties: Module #5 Name: module-alsa-sink Argument: device=dmix Usage counter: 0 Properties: module.author = "Lennart Poettering" module.description = "ALSA Sink" module.version = "5.0" Module #6 Name: module-alsa-source Argument: device=dsnoop Usage counter: 0 Properties: module.author = "Lennart Poettering" module.description = "ALSA Source" module.version = "5.0" Module #7 Name: module-native-protocol-unix Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Native protocol (UNIX sockets)" module.version = "5.0" Module #8 Name: module-default-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the default sink and source" module.version = "5.0" Module #9 Name: module-rescue-streams Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "When a sink/source is removed, try to move its streams to the default sink/source" module.version = "5.0" Module #10 Name: module-always-sink Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Always keeps at least one sink loaded even if it's a null one" module.version = "5.0" Module #11 Name: module-intended-roles Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically set device of streams based on intended roles of devices" module.version = "5.0" Module #12 Name: module-suspend-on-idle Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "When a sink/source is idle for too long, suspend it" module.version = "5.0" Module #13 Name: module-position-event-sounds Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them." module.version = "5.0" Module #14 Name: module-role-cork Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Mute & cork streams with certain roles while others exist" module.version = "5.0" Module #15 Name: module-filter-heuristics Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Detect when various filters are desirable" module.version = "5.0" Module #16 Name: module-filter-apply Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Load filter sinks automatically when needed" module.version = "5.0" Module #17 Name: module-x11-publish Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "X11 credential publisher" module.version = "5.0" -------------- next part -------------- Server String: unix:/tmp/pulse-2L9K88eMlGn7/native Library Protocol Version: 29 Server Protocol Version: 29 Is Local: yes Client Index: 29 Tile Size: 65496 User Name: andrew Host Name: ileemo Server Name: pulseaudio Server Version: 5.0 Default Sample Specification: s16le 2ch 44100Hz Default Channel Map: front-left,front-right Default Sink: alsa_output.dmix Default Source: alsa_input.dsnoop Cookie: 989d:c5a8 From owner at bugs.debian.org Mon Mar 2 10:54:04 2015 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Mon, 02 Mar 2015 10:54:04 +0000 Subject: Processed (with 1 errors): forcibly merging 684691 779556 References: <1425293469-962-bts-andrewsh@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > forcemerge 684691 779556 Bug #684691 {Done: Felipe Sateler } [alsa-utils] PulseAudio-related hidden config files & folders created in the root directory Bug #675857 {Done: Felipe Sateler } [alsa-utils] PulseAudio-related hidden config files & folders created in the root directory Bug #712980 {Done: Jordi Mallach } [alsa-utils] alsa-utils startup script creates /.pulse files ("Failed to create secure directory") when pulseaudio is installed Bug #720678 {Done: Jordi Mallach } [alsa-utils] [alsa-utils] create unwanted pulse files on boot Bug #742388 {Done: Felipe Sateler } [alsa-utils] libpulse0: spurious files .pulse and .pulse-cookie in /root directory Unable to merge bugs because: package of #779556 is 'pulseaudio' not 'alsa-utils' Failed to forcibly merge 684691: Did not alter merged bugs > thanks Stopping processing here. Please contact me if you need assistance. -- 675857: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675857 684691: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=684691 712980: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=712980 720678: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=720678 742388: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=742388 779556: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=779556 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Mon Mar 2 11:15:16 2015 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Mon, 02 Mar 2015 11:15:16 +0000 Subject: Processed: reassign 779556 to alsa-utils, forcibly merging 684691 779556 References: <1425294756-3650-bts-andrewsh@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > reassign 779556 alsa-utils Bug #779556 [pulseaudio] pulseaudio creates .config/pulse in a root directory Bug reassigned from package 'pulseaudio' to 'alsa-utils'. No longer marked as found in versions pulseaudio/5.0-4. Ignoring request to alter fixed versions of bug #779556 to the same values previously set > forcemerge 684691 779556 Bug #684691 {Done: Felipe Sateler } [alsa-utils] PulseAudio-related hidden config files & folders created in the root directory Bug #675857 {Done: Felipe Sateler } [alsa-utils] PulseAudio-related hidden config files & folders created in the root directory Bug #712980 {Done: Jordi Mallach } [alsa-utils] alsa-utils startup script creates /.pulse files ("Failed to create secure directory") when pulseaudio is installed Bug #720678 {Done: Jordi Mallach } [alsa-utils] [alsa-utils] create unwanted pulse files on boot Bug #742388 {Done: Felipe Sateler } [alsa-utils] libpulse0: spurious files .pulse and .pulse-cookie in /root directory Bug #779556 [alsa-utils] pulseaudio creates .config/pulse in a root directory Severity set to 'serious' from 'normal' Marked Bug as done Added indication that 779556 affects pulseaudio Marked as fixed in versions alsa-utils/1.0.27.2-1. Marked as found in versions alsa-utils/1.0.25-3, alsa-utils/1.0.25-4, and alsa-utils/1.0.27.1-1. Added tag(s) patch. Bug #675857 {Done: Felipe Sateler } [alsa-utils] PulseAudio-related hidden config files & folders created in the root directory Bug #712980 {Done: Jordi Mallach } [alsa-utils] alsa-utils startup script creates /.pulse files ("Failed to create secure directory") when pulseaudio is installed Bug #720678 {Done: Jordi Mallach } [alsa-utils] [alsa-utils] create unwanted pulse files on boot Bug #742388 {Done: Felipe Sateler } [alsa-utils] libpulse0: spurious files .pulse and .pulse-cookie in /root directory Merged 675857 684691 712980 720678 742388 779556 > thanks Stopping processing here. Please contact me if you need assistance. -- 675857: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675857 684691: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=684691 712980: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=712980 720678: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=720678 742388: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=742388 779556: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=779556 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From biebl at debian.org Wed Mar 4 17:31:01 2015 From: biebl at debian.org (biebl at debian.org) Date: Wed, 04 Mar 2015 18:31:01 +0100 Subject: Bug#779747: pulseaudio: Transition to libsystemd Message-ID: Source: pulseaudio Version: 5.0-13 Severity: normal User: pkg-systemd-maintainers at lists.alioth.debian.org Usertags: libsystemd Hi! In systemd v209, released over a year ago, the various libsystemd-* libraries (libsystemd-journal.so, libsystemd-login.so, libsystem-daemon.so, libsystemd-id128.so) were merged into a single libsystemd.so library to reduce code duplication and avoid cyclic dependencies [1]. Your package declares a build-dependency on either libsystemd-daemon-dev, libsystemd-login-dev or libsystemd-journal-dev. Please update your package so it can be built against libsystemd. Updating the configure check / build system =========================================== If your package use pkg-config and autotools, a typical configure check looks like: PKG_CHECK_MODULES(FOO, libsystemd-login) All you need to do, is change that to PKG_CHECK_MODULES(FOO, libsystemd) If there are checks for libsystemd-journal, libsystemd-login and libsystemd-journal, you can merge that into a single check: PKG_CHECK_MODULES(FOO, libsystemd-login) PKG_CHECK_MODULES(BAR, libsystemd-daemon) PKG_CHECK_MODULES(BAZ, libsystemd-journal) => PKG_CHECK_MODULES(FOO, libsystemd) BAR_{CFLAGS,LIBS} and BAZ_{CFLAGS,LIBS} need to be updated accordingly. If you/upstream wants to support building against older versions of systemd, you can update the configure check as follows: PKG_CHECK_MODULES(FOO, libsystemd-login) => PKG_CHECK_MODULES(FOO, libsystemd,, [PKG_CHECK_MODULES(FOO, libsystemd-login)]) See [2] as an example how to do that. Updating Build-Depends ====================== Please replace the Build-Depends on libsystemd-*-dev with libsystemd-dev [3]. I would recommend against adding alternative Build-Depends against the old dev packages. This is not necessary, since libsystemd-dev is already provided in jessie. Backports ========= Debian jessie already ships with libsystemd-dev, so this change is safe regarding backports. Upstream ======== Please consider forwarding this upstream. In some cases upstream might already have a fix for that Thanks for considering. Michael, on behalf of the pkg-systemd team. [1] http://lists.freedesktop.org/archives/systemd-devel/2014-February/017146.html [2] http://cgit.freedesktop.org/NetworkManager/NetworkManager/commit/?id=8f6317f88a3ca3f42cf72137bb033b4a020b7b82 [3] http://anonscm.debian.org/cgit/pkg-utopia/network-manager.git/commit/?id=69b95405b07fc2a5833dfcbe18c9229706c2104e From starry_1001 at hotmail.com Thu Mar 5 16:14:38 2015 From: starry_1001 at hotmail.com (SDR/SZX Starry Shi) Date: Fri, 6 Mar 2015 00:14:38 +0800 Subject: 238 14.102.194.142 Global Supply Chain Solutions Message-ID: <201503060014382380481@yahoogo.cc> An HTML attachment was scrubbed... URL: From owner at bugs.debian.org Sun Mar 8 14:18:07 2015 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sun, 08 Mar 2015 14:18:07 +0000 Subject: Bug#779747: marked as done (pulseaudio: Transition to libsystemd) References: Message-ID: Your message dated Sun, 8 Mar 2015 11:14:09 -0300 with message-id and subject line Re: Bug#779747: pulseaudio: Transition to libsystemd has caused the Debian Bug report #779747, regarding pulseaudio: Transition to libsystemd to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 779747: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=779747 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: biebl at debian.org Subject: pulseaudio: Transition to libsystemd Date: Wed, 04 Mar 2015 18:31:01 +0100 Size: 4107 URL: -------------- next part -------------- An embedded message was scrubbed... From: Felipe Sateler Subject: Re: Bug#779747: pulseaudio: Transition to libsystemd Date: Sun, 8 Mar 2015 11:14:09 -0300 Size: 3369 URL: From pm.debian at googlemail.com Sun Mar 8 23:02:23 2015 From: pm.debian at googlemail.com (Paul Menzel) Date: Mon, 09 Mar 2015 00:02:23 +0100 Subject: gnome-core: Audio muted Message-ID: <1425855743.8419.12.camel@googlemail.com> Package: gnome-core Version: 1:3.14+3 Severity: important Dear Maintainer, I am sorry for assigning the report to the package `gnome-core`, but I am unsure about the correct package. Each start the volume is muted, denoted by a cross at the speaker symbol in GDM and, after login, in GNOME Shell. Increasing the volume works and sound can be heard, but after shutting the system down and starting it again, the volume is muted again. On the system, no ALSA packages are installed. Are these needed for `/lib/systemd/system/alsa-restore.service` or should some other component handle that? Looking through PulseAudio bug reports, it might be related to bug #773086 (pulseaudio: Volume resets to mute everytime I login with Gnome (Gnome on Wayland) version 3.14.1 (gnome-shell) on Debian Sid). Thanks, Paul [1] https://bugs.debian.org/773086 -- System Information: Debian Release: 8.0 APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.16.0-4-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Init: systemd (via /run/systemd/system) Versions of packages gnome-core depends on: ii adwaita-icon-theme 3.14.0-2 ii at-spi2-core 2.14.0-1 ii baobab 3.14.1-1 ii caribou 0.4.15-1 ii caribou-antler 0.4.15-1 ii dconf-gsettings-backend 0.22.0-1 ii dconf-tools 0.22.0-1 ii empathy 3.12.7-1 ii eog 3.14.1-1 ii evince 3.14.1-2 ii evolution-data-server 3.12.10~pre-1 ii fonts-cantarell 0.0.16-1 ii gdm3 3.14.1-4 ii gkbd-capplet 3.6.0-1 ii glib-networking 2.42.0-2 ii gnome-backgrounds 3.14.1-1 ii gnome-bluetooth 3.14.0-2 ii gnome-calculator 3.14.1-1 ii gnome-contacts 3.14.1-1 ii gnome-control-center 1:3.14.2-3 ii gnome-dictionary 3.14.1-1 ii gnome-disk-utility 3.12.1-1+b1 ii gnome-font-viewer 3.14.0-1 ii gnome-keyring 3.14.0-1+b1 ii gnome-menus 3.13.3-5 ii gnome-online-accounts 3.14.2-1 ii gnome-online-miners 3.14.0-2 ii gnome-packagekit 3.14.0-1 ii gnome-screenshot 3.14.0-1 ii gnome-session 3.14.0-2 ii gnome-settings-daemon 3.14.2-2 ii gnome-shell 3.14.2-3+b1 ii gnome-shell-extensions 3.14.2-1 ii gnome-sushi 3.12.0-2+b1 ii gnome-system-log 3.9.90-2 ii gnome-system-monitor 3.14.1-1 ii gnome-terminal 3.14.1-1 ii gnome-themes-standard 3.14.2.2-1 ii gnome-user-guide 3.14.1-1 ii gnome-user-share 3.14.0-2 ii gsettings-desktop-schemas 3.14.1-1 ii gstreamer1.0-plugins-base 1.4.4-2 ii gstreamer1.0-plugins-good 1.4.4-2 ii gstreamer1.0-pulseaudio 1.4.4-2 ii gtk2-engines 1:2.20.2-3 ii gucharmap 1:3.14.1-1 ii gvfs-backends 1.22.2-1 ii gvfs-bin 1.22.2-1 ii gvfs-fuse 1.22.2-1 ii iceweasel 31.5.0esr-1 ii libatk-adaptor 2.14.0-2 ii libcanberra-pulse 0.30-2.1 ii libcaribou-gtk-module 0.4.15-1 ii libcaribou-gtk3-module 0.4.15-1 ii libgtk-3-common 3.14.5-1 ii libpam-gnome-keyring 3.14.0-1+b1 ii metacity 1:3.14.3-1 ii mousetweaks 3.12.0-1 ii nautilus 3.14.1-2 ii policykit-1-gnome 0.105-2 ii pulseaudio 5.0-13 ii sound-theme-freedesktop 0.8-1 ii totem 3.14.0-2 ii tracker-gui 1.2.4-2 ii vino 3.14.0-2+b1 ii yelp 3.14.1-1 ii zenity 3.14.0-1 Versions of packages gnome-core recommends: ii anacron 2.3-23 ii network-manager-gnome 0.9.10.0-2 Versions of packages gnome-core suggests: ii gnome 1:3.14+3 -- no debconf information -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: This is a digitally signed message part URL: From zanuzzo at sifranutricao.com.br Mon Mar 9 17:04:09 2015 From: zanuzzo at sifranutricao.com.br (ALEXANDRA HAMPEL BAER) Date: Mon, 09 Mar 2015 14:04:09 -0300 Subject: GOTT SEGNE EUCH Message-ID: <20150309140409.5092812naorggjgp@www.arena.twc.com.br> Geliebte Heutzutage sind Gebete Wert als Gold und Diamanten. Sie sind derzeit in der Prozess Durststrecken ?berwinden w?rde, aber wissen, dass der Herr segne euch auf einem Weg, das hei?t, in Situationen, wo nur er kann Ihnen helfen zu glauben, bereit ist. Lassen Sie mich vorstellen, mein Name ist Mrs. Baer Hampel Alexandra, 15. Juli 1954 geboren. Ich leide an Plattenepithelkarzinom die unheilbar krank ist, ich war verheiratet, das hei?t, mein verstorbenen Mann Robert Joseph Edsall US-amerikanische Nationalit?t, herrlich und Seliger Speicher, beratender Ingenieur in der Republik von Benin neun Jahre lang war. Nach sechs Jahren Ehe starb er nach einer kurzen und einfachen 4 Tage der Krankheit. Mein Arzt teilte mir nur, dass meine Tage, weil mein Gesundheitszustand verschlechterte sich gez?hlt sind. Mein Wunsch ist es, eine wohlt?tige Spenden, alles, was ich von meinen verstorbenen Mann geerbt. Aus Angst vor Menschen der guten Sitten zu suchen, die dieses Geld f?r gute Zwecke einsetzen k?nnen, ich w?hlte Sie unter denen, dass Gott segnen wollte und dass hat warum ich mich entschieden, mein Erbe zu verlassen. Deshalb m?chte ich gn?dig, und um den Armen zu helfen, hinterlassen Sie mein Erbe in H?he mit einem Wert von 2.250.000 (Dollars US), sodass Sie es verwenden k?nnen, um den Armen, Obdachlosen, die Armen zu helfen. Ich z?hle auf Ihre Gesch?fts-oder Firmenwert und vor allem die ordnungsgem??e Verwendung der Gelder. Gott besch?tze dich. Frau ALEXANDRA HAMPEL BAER Pers?nliche E-mail: baer.hampel58 at msn.com ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. From vav at ou.edu Mon Mar 9 23:26:43 2015 From: vav at ou.edu (Vaughn, Victoria A.) Date: Mon, 9 Mar 2015 23:26:43 +0000 Subject: No subject Message-ID: <34A3C4A692C3C84BAA9118775941AB5D01C0A0EA42@it-monad.sooner.net.ou.edu> WE CAN GET YOU CASH TODAY! We've helped countless of individuals, families and businesses world wide deal with their financial needs by providing them with great rates on a loan without collateral. To speak with a customer service agent today or get a loan today, email us at paydaycredits at gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From contato at ieptbpa.com.br Thu Mar 12 14:45:06 2015 From: contato at ieptbpa.com.br (Irasch Finance) Date: Thu, 12 Mar 2015 14:45:06 +0000 Subject: Oferta de =?iso-8859-1?b?ZmluYW5jaWFjafNuLg==?= Message-ID: <20150312144506.98942xxd2phqq7i8@webmail.ieptbpa.com.br> Hola, Usted est? buscando dinero. Concedo pr?stamos financieros. Para obtener m?s informaci?n, p?ngase en contacto conmigo: institutiraschfinance at gmail.com Gracias ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. From owner at bugs.debian.org Sat Mar 14 02:00:07 2015 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sat, 14 Mar 2015 02:00:07 +0000 Subject: Processed: Re: Bug#778981: pulseaudio-module-bluetooth: module-bluetooth-discover not working if loaded in /etc/pulse/default.pa References: <20150222134540.1702.38542.reportbug@debian> Message-ID: Processing control commands: > tags -1 moreinfo Bug #778981 [pulseaudio-module-bluetooth] pulseaudio-module-bluetooth: module-bluetooth-discover not working if loaded in /etc/pulse/default.pa Added tag(s) moreinfo. > severity -1 important Bug #778981 [pulseaudio-module-bluetooth] pulseaudio-module-bluetooth: module-bluetooth-discover not working if loaded in /etc/pulse/default.pa Severity set to 'important' from 'grave' -- 778981: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=778981 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From fsateler at debian.org Sat Mar 14 01:55:16 2015 From: fsateler at debian.org (Felipe Sateler) Date: Fri, 13 Mar 2015 22:55:16 -0300 Subject: Bug#778981: pulseaudio-module-bluetooth: module-bluetooth-discover not working if loaded in /etc/pulse/default.pa In-Reply-To: <20150222134540.1702.38542.reportbug@debian> References: <20150222134540.1702.38542.reportbug@debian> Message-ID: Control: tags -1 moreinfo Control: severity -1 important Hi Alessandro, On 22 February 2015 at 10:45, Alessandro Bresci wrote: > > Package: pulseaudio-module-bluetooth > Version: 5.99.2-2 > Severity: grave > Justification: renders package unusable I downgraded to important, as it is only a part of pulseaudio that is broken, and there is a known workaround. > > Dear Maintainer, > > * What led up to the situation? > I turn on the bluetooth headset > * What exactly did you do (or not do) that was effective (or > ineffective)? > The bluetooth device(speaker headset) pair and connect correctly > * What was the outcome of this action? > Nothing happen in pulse audio > * What outcome did you expect instead? > I expected to play sound in the bluetooth device via pulse audio > > I upgraded to the last experimental version of the package but I have the same result. > > a description and a workaround is here: > > https://g751jy.wordpress.com/about/parrot-zik-bluetooth-headset/ > > thank you, Please attach a verbose log of pulseaudio[2] when the problem arises (ie, without the workaround). You can set the verbosity in the configuration file (/etc/puslse/daemon.conf) so that it logs verbosely when autostarted on login. [1] http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss [2] https://wiki.ubuntu.com/PulseAudio/Log -- Saludos, Felipe Sateler From owner at bugs.debian.org Sat Mar 14 02:03:11 2015 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sat, 14 Mar 2015 02:03:11 +0000 Subject: Processed: severity of 778981 is important References: <1426297622-2575-bts-fsateler@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > severity 778981 important Bug #778981 [pulseaudio-module-bluetooth] pulseaudio-module-bluetooth: module-bluetooth-discover not working if loaded in /etc/pulse/default.pa Ignoring request to change severity of Bug 778981 to the same value. > thanks Stopping processing here. Please contact me if you need assistance. -- 778981: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=778981 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Sat Mar 14 02:03:15 2015 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sat, 14 Mar 2015 02:03:15 +0000 Subject: Bug#768824: marked as done (pulseaudio: DISALLOW_MODULE_LOADING which is set in /etc/default/pulseaudio is overriden in /etc/init.d/pulseaudio) References: <20141109142253.20183.4330.reportbug@debian> Message-ID: Your message dated Fri, 13 Mar 2015 23:00:19 -0300 with message-id and subject line Re: Bug#768824: pulseaudio: DISALLOW_MODULE_LOADING which is set in /etc/default/pulseaudio is overriden in /etc/init.d/pulseaudio has caused the Debian Bug report #768824, regarding pulseaudio: DISALLOW_MODULE_LOADING which is set in /etc/default/pulseaudio is overriden in /etc/init.d/pulseaudio to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 768824: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=768824 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?q?Juan_D=C3=ADaz_Porras?= Subject: pulseaudio: DISALLOW_MODULE_LOADING which is set in /etc/default/pulseaudio is overriden in /etc/init.d/pulseaudio Date: Sun, 09 Nov 2014 15:22:53 +0100 Size: 9527 URL: -------------- next part -------------- An embedded message was scrubbed... From: Felipe Sateler Subject: Re: Bug#768824: pulseaudio: DISALLOW_MODULE_LOADING which is set in /etc/default/pulseaudio is overriden in /etc/init.d/pulseaudio Date: Fri, 13 Mar 2015 23:00:19 -0300 Size: 5120 URL: From ftpmaster at ftp-master.debian.org Sat Mar 14 02:11:01 2015 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sat, 14 Mar 2015 02:11:01 +0000 Subject: Processing of pulseaudio_6.0-1_amd64.changes Message-ID: pulseaudio_6.0-1_amd64.changes uploaded successfully to localhost along with the files: pulseaudio_6.0-1.dsc pulseaudio_6.0.orig.tar.xz pulseaudio_6.0-1.debian.tar.xz pulseaudio_6.0-1_amd64.deb pulseaudio-dbg_6.0-1_amd64.deb pulseaudio-utils_6.0-1_amd64.deb pulseaudio-utils-dbg_6.0-1_amd64.deb pulseaudio-esound-compat_6.0-1_amd64.deb pulseaudio-esound-compat-dbg_6.0-1_amd64.deb pulseaudio-module-zeroconf_6.0-1_amd64.deb pulseaudio-module-zeroconf-dbg_6.0-1_amd64.deb pulseaudio-module-jack_6.0-1_amd64.deb pulseaudio-module-jack-dbg_6.0-1_amd64.deb pulseaudio-module-lirc_6.0-1_amd64.deb pulseaudio-module-lirc-dbg_6.0-1_amd64.deb pulseaudio-module-gconf_6.0-1_amd64.deb pulseaudio-module-gconf-dbg_6.0-1_amd64.deb pulseaudio-module-raop_6.0-1_amd64.deb pulseaudio-module-raop-dbg_6.0-1_amd64.deb pulseaudio-module-bluetooth_6.0-1_amd64.deb pulseaudio-module-bluetooth-dbg_6.0-1_amd64.deb pulseaudio-module-x11_6.0-1_amd64.deb pulseaudio-module-x11-dbg_6.0-1_amd64.deb libpulse0_6.0-1_amd64.deb libpulse0-dbg_6.0-1_amd64.deb libpulse-mainloop-glib0_6.0-1_amd64.deb libpulse-mainloop-glib0-dbg_6.0-1_amd64.deb libpulse-dev_6.0-1_amd64.deb libpulsedsp_6.0-1_amd64.deb libpulsedsp-dbg_6.0-1_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Sat Mar 14 03:34:53 2015 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sat, 14 Mar 2015 03:34:53 +0000 Subject: pulseaudio_6.0-1_amd64.changes ACCEPTED into experimental Message-ID: Accepted: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 1.8 Date: Fri, 13 Mar 2015 22:45:13 -0300 Source: pulseaudio Binary: pulseaudio pulseaudio-dbg pulseaudio-utils pulseaudio-utils-dbg pulseaudio-esound-compat pulseaudio-esound-compat-dbg pulseaudio-module-zeroconf pulseaudio-module-zeroconf-dbg pulseaudio-module-jack pulseaudio-module-jack-dbg pulseaudio-module-lirc pulseaudio-module-lirc-dbg pulseaudio-module-gconf pulseaudio-module-gconf-dbg pulseaudio-module-raop pulseaudio-module-raop-dbg pulseaudio-module-bluetooth pulseaudio-module-bluetooth-dbg pulseaudio-module-x11 pulseaudio-module-x11-dbg libpulse0 libpulse0-dbg libpulse-mainloop-glib0 libpulse-mainloop-glib0-dbg libpulse-dev libpulsedsp libpulsedsp-dbg Architecture: source amd64 Version: 6.0-1 Distribution: experimental Urgency: medium Maintainer: Pulseaudio maintenance team Changed-By: Felipe Sateler Description: libpulse-dev - PulseAudio client development headers and libraries libpulse-mainloop-glib0 - PulseAudio client libraries (glib support) libpulse-mainloop-glib0-dbg - PulseAudio client libraries (glib support) (debugging symbols) libpulse0 - PulseAudio client libraries libpulse0-dbg - PulseAudio client libraries (debugging symbols) libpulsedsp - PulseAudio OSS pre-load library libpulsedsp-dbg - PulseAudio OSS pre-load library detached debugging symbols pulseaudio - PulseAudio sound server pulseaudio-dbg - PulseAudio sound server (debugging symbols) pulseaudio-esound-compat - PulseAudio ESD compatibility layer pulseaudio-esound-compat-dbg - PulseAudio ESD compatibility layer (debugging symbols) pulseaudio-module-bluetooth - Bluetooth module for PulseAudio sound server pulseaudio-module-bluetooth-dbg - Bluetooth module for PulseAudio sound server (debugging symbols) pulseaudio-module-gconf - GConf module for PulseAudio sound server pulseaudio-module-gconf-dbg - GConf module for PulseAudio sound server (debugging symbols) pulseaudio-module-jack - jackd modules for PulseAudio sound server pulseaudio-module-jack-dbg - jackd modules for PulseAudio sound server (debugging symbols) pulseaudio-module-lirc - lirc module for PulseAudio sound server pulseaudio-module-lirc-dbg - lirc module for PulseAudio sound server (debugging symbols) pulseaudio-module-raop - RAOP module for PulseAudio sound server pulseaudio-module-raop-dbg - RAOP module for PulseAudio sound server (debugging symbols) pulseaudio-module-x11 - X11 module for PulseAudio sound server pulseaudio-module-x11-dbg - X11 module for PulseAudio sound server (debugging symbols) pulseaudio-module-zeroconf - Zeroconf module for PulseAudio sound server pulseaudio-module-zeroconf-dbg - Zeroconf module for PulseAudio sound server (debugging symbols) pulseaudio-utils - Command line tools for the PulseAudio sound server pulseaudio-utils-dbg - PulseAudio command line tools (debugging symbols) Closes: 776331 Changes: pulseaudio (6.0-1) experimental; urgency=medium . [ Luke Yelavich ] * New upstream release * Remove pulseaudio-kde autostart file on upgrade (Closes: #776331) . [ Felipe Sateler ] * Upload to experimental Checksums-Sha1: 0f6300774e5be51dccc64a1eb439748513266f25 4648 pulseaudio_6.0-1.dsc 3607d523fb270d9b68463de30f5d9e17957f1088 1469248 pulseaudio_6.0.orig.tar.xz aabe73511195ba2f75af4a1e700dad1d5e707567 29772 pulseaudio_6.0-1.debian.tar.xz d35efd51268575c09cf5de7349fcbf497317e56c 1013202 pulseaudio_6.0-1_amd64.deb a9877316605e21084f108e8a832f678168e36718 2732436 pulseaudio-dbg_6.0-1_amd64.deb e13e458f8b946f2942ea19b79c40e15c5b8d60fa 69760 pulseaudio-utils_6.0-1_amd64.deb c73d4ef79ae416968575ceac567501aedd0aed14 106868 pulseaudio-utils-dbg_6.0-1_amd64.deb 115d74841648a547dac3814abb11c4f91591d632 49178 pulseaudio-esound-compat_6.0-1_amd64.deb f418373120124f7e2cd3184ee055b035f276c797 127040 pulseaudio-esound-compat-dbg_6.0-1_amd64.deb 3315bf6f606d0afa9cf43baeb9f491790b075bdf 38926 pulseaudio-module-zeroconf_6.0-1_amd64.deb a3af14e288d95eb98436f5ec77ce574618ea28e9 79820 pulseaudio-module-zeroconf-dbg_6.0-1_amd64.deb b9fec0373bb42aec76b265942ed0f81dc8d6b4d1 37826 pulseaudio-module-jack_6.0-1_amd64.deb 02dcfb71e75712731eafa0b370d648bcb87b09b4 81386 pulseaudio-module-jack-dbg_6.0-1_amd64.deb e2cf934c42278c732883489fc563f4106e310ff6 27918 pulseaudio-module-lirc_6.0-1_amd64.deb ce1b1cc5119993aa9730023de2333a77e2b3d340 42282 pulseaudio-module-lirc-dbg_6.0-1_amd64.deb 5d53d0bf9632dfd700d37fef41c7cfaca6b3cd04 30544 pulseaudio-module-gconf_6.0-1_amd64.deb 0cbdbbf83cbb7d100bb5efc36bdefc12ba87531d 48258 pulseaudio-module-gconf-dbg_6.0-1_amd64.deb a7f107c9afaa5be09ba3c2d90d93c339a5452d7f 41106 pulseaudio-module-raop_6.0-1_amd64.deb 43e7b447297215c33da91ed94ff19f5859eea8d9 89134 pulseaudio-module-raop-dbg_6.0-1_amd64.deb 0c5054149ff148f552dae5e6b9ebb43f5f10aff6 100258 pulseaudio-module-bluetooth_6.0-1_amd64.deb 8ebc6d4aee4ad83404e2658d035ea91c0f67d5a1 267742 pulseaudio-module-bluetooth-dbg_6.0-1_amd64.deb 34fa4837872c6e0949d332cd2e2c7b3c3909ebb5 34634 pulseaudio-module-x11_6.0-1_amd64.deb 2445ba03b434d02b5fbabc55f5801105adc347be 99412 pulseaudio-module-x11-dbg_6.0-1_amd64.deb 97312d88e45eae41971a464550fb193affa80053 263008 libpulse0_6.0-1_amd64.deb 4c0369f98bbf4b8f8a6d5c44cfb5713e949c3cfe 675582 libpulse0-dbg_6.0-1_amd64.deb 64d2b7044e210abf5c2109442e4c5950b02f3823 29982 libpulse-mainloop-glib0_6.0-1_amd64.deb 030a83b50d728d6c21e8a6e280e641a19a5d5d37 38720 libpulse-mainloop-glib0-dbg_6.0-1_amd64.deb b8d53f94c088c23713a1a6aa67ece9d088bb31cc 88838 libpulse-dev_6.0-1_amd64.deb c703c7479080a6608bb30610a841fd74b7ecb877 39560 libpulsedsp_6.0-1_amd64.deb cc1e18c269ef7d6e2274069c5871484643f546cb 60670 libpulsedsp-dbg_6.0-1_amd64.deb Checksums-Sha256: 21043d71a23b41b8ed47f6f236bdc5e126d14be508cc3aa27d2b3d209773bbe6 4648 pulseaudio_6.0-1.dsc b50640e0b80b1607600accfad2e45aabb79d379bf6354c9671efa2065477f6f6 1469248 pulseaudio_6.0.orig.tar.xz 35482c0cc1f551b7559bb9e4a62af7288f03c809c71b1a65cc5abdc0de88cf1d 29772 pulseaudio_6.0-1.debian.tar.xz d92a3facd16ef3a9481f2300cfd078f78ed5e95057ca62215127744e881b84b8 1013202 pulseaudio_6.0-1_amd64.deb b1e7f63fac6a9f42402a5b2cb34d7151d18a4471be0e5754eb1c69c1aae018aa 2732436 pulseaudio-dbg_6.0-1_amd64.deb 70f76e2fb1b30c55f603a6f3a57b7144e8bc76d5c6ea0d8d79c964e74cfb8df4 69760 pulseaudio-utils_6.0-1_amd64.deb 6c60b0ebd2a838f5730b647eb47b5f54d5d8c235e437ee707014e4f110a302ab 106868 pulseaudio-utils-dbg_6.0-1_amd64.deb b976c9a1e5c7e4394a3c58f65dedf6798ee45b14cdc637c93819fe9643555937 49178 pulseaudio-esound-compat_6.0-1_amd64.deb b41bde724411d05a4b26611a961ab7d143c5dd3c74b33d7ce6b4dc612faeca6c 127040 pulseaudio-esound-compat-dbg_6.0-1_amd64.deb ff22d77dad8747191459860c32e27f265e48d56adababa057e263810cdcfe8c5 38926 pulseaudio-module-zeroconf_6.0-1_amd64.deb e1756a635e1323aea77c7458b59c21e1f515b44cfcc317a193841c335827db49 79820 pulseaudio-module-zeroconf-dbg_6.0-1_amd64.deb e780ab20cf62693f95bbca8186e1a91bbf8d4b022d3766ad9e4fea6d7f665996 37826 pulseaudio-module-jack_6.0-1_amd64.deb ea54d721bceefc6cf281c168e7de157fce56a070701843177800417a2aa19e75 81386 pulseaudio-module-jack-dbg_6.0-1_amd64.deb b0045bf55923ad947ec9f5d13136179f23c950c1568bdc9b50cb37a7e8129ed6 27918 pulseaudio-module-lirc_6.0-1_amd64.deb eab810e5106fd0d7da25301bc4a206980bf0266016b74dab1606ae9203afd911 42282 pulseaudio-module-lirc-dbg_6.0-1_amd64.deb 5b28b69635d4752fd42f2788eb044f78b7a32e68fadd3c9995f58ebc12c6e509 30544 pulseaudio-module-gconf_6.0-1_amd64.deb 967fc51916cc877b2aab8e2a8b7ee0e1bb2949040ebbe09c5a9bc1dfb9358127 48258 pulseaudio-module-gconf-dbg_6.0-1_amd64.deb ec2b6fc7abbaed7495c59ad880a3c9c43bb4f09c111f8ac9d4de95582024f12a 41106 pulseaudio-module-raop_6.0-1_amd64.deb 2b45574b078d371661fae009c8e09e64b7cb532771b6289a9c1ba8abbfa57c51 89134 pulseaudio-module-raop-dbg_6.0-1_amd64.deb cd21e96cbcd2e7d75794d6c1503e2eda83007addd3c8873d61ac55869b3909bb 100258 pulseaudio-module-bluetooth_6.0-1_amd64.deb 26e2ab1cf43cd8d86a32aac3fa51d227289b70376f814fa88e94e83d27b54a01 267742 pulseaudio-module-bluetooth-dbg_6.0-1_amd64.deb 4f9704ef86c7fa62f49e2329dc63192bb9b2c32d8f368b85de98bcdbf311d877 34634 pulseaudio-module-x11_6.0-1_amd64.deb 92eec3e9486b7f054d7e9d261b833493e896c8ddb7f02b542fc89b6e1299b3dc 99412 pulseaudio-module-x11-dbg_6.0-1_amd64.deb cafe55e0075159fdc98844d3b7b41ba7d1541229f854b3bf15519b3cc97ba3b0 263008 libpulse0_6.0-1_amd64.deb 68c8edb69faa5acdbe30157b918925eecd5491d9b7878b38e02923f4862b55c6 675582 libpulse0-dbg_6.0-1_amd64.deb 06e2330bdf61fdf2455c312b8997fb0fdce838aecc4e76c7ed6189c57b358be4 29982 libpulse-mainloop-glib0_6.0-1_amd64.deb 0befe31c34c9fb0a692a1b43cabdadae81ee9611fa7a9dd55c8d19b18fd054f1 38720 libpulse-mainloop-glib0-dbg_6.0-1_amd64.deb 5d4a331559430d1ddf13198825c25054910c726696fbe18cb51c7c5516854375 88838 libpulse-dev_6.0-1_amd64.deb b3552a0ed0e335a12f49a4139db7c980385ed25774c8c97470181077aef6148d 39560 libpulsedsp_6.0-1_amd64.deb ba3faac119ae03c2be7d56b7309a191a6f27d92678c883d78298a26e90b9f26b 60670 libpulsedsp-dbg_6.0-1_amd64.deb Files: c5e19bc79459a604f5b9facd288d3daa 4648 sound optional pulseaudio_6.0-1.dsc b691e83b7434c678dffacfa3a027750e 1469248 sound optional pulseaudio_6.0.orig.tar.xz f4ae8377c546e5cc1b0ac63d4b6228c5 29772 sound optional pulseaudio_6.0-1.debian.tar.xz 86e1deddcd5dae5fd62c4d18c2a7a7ce 1013202 sound optional pulseaudio_6.0-1_amd64.deb 6d00f78848f6b9a4d11d8f59206e4874 2732436 debug extra pulseaudio-dbg_6.0-1_amd64.deb a5a30e67b9a2eb964b0889b894886b3a 69760 sound optional pulseaudio-utils_6.0-1_amd64.deb cdf96133d942e9a6229fb4f1a87b1ce2 106868 debug extra pulseaudio-utils-dbg_6.0-1_amd64.deb 48713d1085a52aac0f01137a75108a77 49178 sound optional pulseaudio-esound-compat_6.0-1_amd64.deb 6cd8d0caa0fa6dd91ad5f8ed380e9094 127040 debug extra pulseaudio-esound-compat-dbg_6.0-1_amd64.deb 2e19bd772886179989c8b9ab09bfdfb8 38926 sound optional pulseaudio-module-zeroconf_6.0-1_amd64.deb b173a37ef36c320fe030cb8f110b4e88 79820 debug extra pulseaudio-module-zeroconf-dbg_6.0-1_amd64.deb d7764a46d98a419ec8d0915da3c9a986 37826 sound optional pulseaudio-module-jack_6.0-1_amd64.deb 5db36edbeb8490e6aaa4435bfb6f6967 81386 debug extra pulseaudio-module-jack-dbg_6.0-1_amd64.deb 686bd000bf197743def8843be4b1dbed 27918 sound optional pulseaudio-module-lirc_6.0-1_amd64.deb 2893e5bb74ec0fa905a81b48ca783b7f 42282 debug extra pulseaudio-module-lirc-dbg_6.0-1_amd64.deb 5979611ad82c49b3723e7c4bd393de0e 30544 sound optional pulseaudio-module-gconf_6.0-1_amd64.deb e5e5778eab91e9f9c4721ecffe56b1af 48258 debug extra pulseaudio-module-gconf-dbg_6.0-1_amd64.deb e8937c4f3fb8606384ee1cd4cae20ee2 41106 sound optional pulseaudio-module-raop_6.0-1_amd64.deb d8dfacf88f86a76b625db1fdd93baca0 89134 debug extra pulseaudio-module-raop-dbg_6.0-1_amd64.deb c1ba995aa82dee8b14dafd6fde20c2bf 100258 sound extra pulseaudio-module-bluetooth_6.0-1_amd64.deb f6464cee4442991ced40f1022ed39ced 267742 debug extra pulseaudio-module-bluetooth-dbg_6.0-1_amd64.deb 8a88e3384f6b01db8e28a9a7a6811b6f 34634 sound optional pulseaudio-module-x11_6.0-1_amd64.deb bb5b20d524a4206b17899171b20aab5d 99412 debug extra pulseaudio-module-x11-dbg_6.0-1_amd64.deb 400b7cd2ca3c8c7e527aba9e40356d46 263008 libs optional libpulse0_6.0-1_amd64.deb aafe4ec200df413fada7e0ca8800b618 675582 debug extra libpulse0-dbg_6.0-1_amd64.deb d59e99271a070fd876b149725f28c73c 29982 sound optional libpulse-mainloop-glib0_6.0-1_amd64.deb f05da30abd1e018d887be28fa53a2250 38720 debug extra libpulse-mainloop-glib0-dbg_6.0-1_amd64.deb 88bf190312d65412ce6af742eeded3dd 88838 libdevel optional libpulse-dev_6.0-1_amd64.deb 628dfa75c124af0468e2ad56259e5c3e 39560 sound optional libpulsedsp_6.0-1_amd64.deb a43e4f21cccc5fa6e0d8b6cf80533d56 60670 debug extra libpulsedsp-dbg_6.0-1_amd64.deb -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAEBCAAGBQJVA5cyAAoJEKO6uuJAjdbPbwMP/RPFvFdrpixs2/LQkBVtmb1k LewXRLDlTzt71hct4943A7Yie0czcKl9ndzs1pB00yhNchpXewmcJl+YYEAEfjt7 Ek9WFNLYTs7nwe6f/ckFzsiCVz/n7BiRHNQPXWa2Vfc7rqpCIFM3WxqnJodLFuPB e+Le/pvkZRsGkVNP4soJ1yooHwh66T1KyiNO4NWAPxOdsjQhRG8wJEoyJw9FBaNs dFqhPEm5oUxW+Hf9FC6l4s32kQWSoN9l+dF0B2KeRgRyGnu9HHqJvcShtFmEcVyW dYHylp4LXVowzzOnldrR0tqORn1gecVw0bVZyNcZwQcock8VXR1Yxvkbb0VebilD zgGrZTCkQBzQZVkii53sURryd7AqjPB0AR5xWZtmFJi7yEJXaq7wkZDPxqx/sX8d nKHpL9x9G1Bw2o4qM5Q0S0pfR3/9xtzE6LyrJQxBF6xVenbYgG+eaehftD5OJXHw 0wrzfWZ/acX6Q+F5diyVKVbq3Msq+ZOJajPh3VI1jVqZvZ5mtLmxPYwXurskeCUP 6ZZT9sXAeIrQ0rVEN4F16oHtroxEeLLvoL0URT9zlLLZZJcv/uBrZvyYfeWtHe9L xTPMiIr9tCOJaSxFVhTUQexiRCE+YuEfodeltyuhM0xd+d7bMdbXpzDnC4b8WQzw g2HbmL4SzWIivUQ1rMRU =ktVJ -----END PGP SIGNATURE----- Thank you for your contribution to Debian. From owner at bugs.debian.org Sat Mar 14 03:39:12 2015 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sat, 14 Mar 2015 03:39:12 +0000 Subject: Bug#776331: marked as done (pulseaudio: conffiles not removed) References: <1422318721.15546.132.camel@debian.org> Message-ID: Your message dated Sat, 14 Mar 2015 03:34:53 +0000 with message-id and subject line Bug#776331: fixed in pulseaudio 6.0-1 has caused the Debian Bug report #776331, regarding pulseaudio: conffiles not removed to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 776331: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=776331 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Paul Wise Subject: pulseaudio: conffiles not removed Date: Tue, 27 Jan 2015 08:32:01 +0800 Size: 5718 URL: -------------- next part -------------- An embedded message was scrubbed... From: Felipe Sateler Subject: Bug#776331: fixed in pulseaudio 6.0-1 Date: Sat, 14 Mar 2015 03:34:53 +0000 Size: 15542 URL: From ozfm at baidu.com Sun Mar 15 22:04:31 2015 From: ozfm at baidu.com (OA-admin) Date: Mon, 16 Mar 2015 06:04:31 +0800 Subject: =?utf-8?B?MjAxNS0zLTE25YWz5LqO5LyB5Lia5YaF6YOo57O757uf6YeN6KaB6YCa?= =?utf-8?B?55+l77yB?= Message-ID: <20150316060442252666@baidu.com> An HTML attachment was scrubbed... URL: From fdelcentro at speedy.com.ar Mon Mar 16 08:52:17 2015 From: fdelcentro at speedy.com.ar (=?UTF-8?B?IlNJRUdFIEFDREgi?=) Date: Mon, 16 Mar 15 08:52:17 +0000 Subject: =?UTF-8?B?SU5WSVRBVElPTiBBIExBIENPTkZFUkVOQ0UgQUNESA==?= Message-ID: An HTML attachment was scrubbed... URL: From test01 at mail.com Mon Mar 16 07:56:15 2015 From: test01 at mail.com (test01 at mail.com) Date: Mon, 16 Mar 2015 13:26:15 +0530 Subject: Dear User Message-ID: Dear User This mail is to inform all our valued customers that we are currently upgrading our Admin database, e-mail Center and expanding e-mail quota limit from 500 MB to 2.6 GB. You need to Upgrade and expand your e-mail quota limit to 2.6 GB before you can continue to use your e-mail.you are required to complete your details below and send it to us.This information would be required to verify and upgrade e-mail account to avoid being closed. Please clicking on the reply button; Full Name: User Name: Email: Password: Your account will remain active after you have successfully confirmed your account to the monitoring Center. Thanks for using our Email Services. ?FD2015 Administrator All Rights Reserved -------------- next part -------------- An HTML attachment was scrubbed... URL: From marieahmedm at yahoo.co.jp Tue Mar 17 10:31:29 2015 From: marieahmedm at yahoo.co.jp (heidi_najjark) Date: Tue, 17 Mar 2015 19:31:29 +0900 (JST) Subject: =?iso-8859-1?Q?Don_pour_la_charit=E9_Salutations_=E0_vous_et_d=E9sol=E9_s?= =?iso-8859-1?Q?i_esta_de_viande_message_pour_vous_comme_une_surprise=2E_M?= =?iso-8859-1?Q?on_nom_est_Mme__heidi_najjark__une_veuve=2C_je_ai_trouv=E9?= =?iso-8859-1?Q?_votre_adresse_email_de_mon_mari_par-fin_internet_dater_fe?= =?iso-8859-1?Q?u_M=2E_Ron_najjark__Actuellement=2C_je_suis_admis_=E0_l=27?= =?iso-8859-1?Q?h=F4pital_souffrant_d=27un_cancer_du_sang_et_des_maladies_?= =?iso-8859-1?Q?de_Parkinson=2E_Je_ne_ai_que_acerca_quelques_mois_=E0_vivr?= =?iso-8859-1?Q?e_et_je_veux_que_vous_transf=E9rer_la_somme_de_=28=24_5=2E?= =?iso-8859-1?Q?400=2C000=2E00=29_=E9tats-unis_dollars_=E0_votre_compte_af?= =?iso-8859-1?Q?in_que_vous_puissiez_me_aider_mes_distribuer_des_fonds_aux?= =?iso-8859-1?Q?_maisons_de_charit=E9_dans_votre_pays=2C_Je_ai_Septembre_c?= =?iso-8859-1?Q?=F4t=E9_20=25_pour_vous_et_votre_famille_que_vous_gardez_u?= =?iso-8859-1?Q?n_don_de_80=25_de_moins_privilage_au_peuple=2C_Je_vais_vou?= =?iso-8859-1?Q?s_donner_plus_de_d=E9tails_ou_compl=E8te_Storry_d=E8s_que_?= =?iso-8859-1?Q?je_recevrai_votre_r=E9ponse_que_le_fonds_a_=E9t=E9_d=E9pos?= =?iso-8859-1?Q?=E9_aupr=E8s_d=27une_banque=2C_Que_Dieu_b=E9nisse_votre_tr?= =?iso-8859-1?Q?avail_gr=E2ce_allmight_main_Restez_b=E9ni__Mrs__heidi_najj?= =?iso-8859-1?Q?ark?= Message-ID: <17599.97217.qm@web101614.mail.kks.yahoo.co.jp> -------------- next part -------------- An HTML attachment was scrubbed... URL: From virgil.langley at apache2-moon.ivan.dreamhost.com Wed Mar 18 02:38:52 2015 From: virgil.langley at apache2-moon.ivan.dreamhost.com (FedEx 2Day A.M.) Date: Tue, 17 Mar 2015 19:38:52 -0700 Subject: Problem with parcel shipping, ID:000823440 Message-ID: <1e4f377ea93dbab7134ddc617d18cfbb@apache2-moon.ivan.dreamhost.com> Dear Customer, Your parcel has arrived at March 14. Courier was unable to deliver the parcel to you. Delivery Label is attached to this email. Thanks and best regards, Virgil Langley, FedEx Station Manager. -------------- next part -------------- A non-text attachment was scrubbed... Name: Label_000823440.zip Type: application/zip Size: 3864 bytes Desc: not available URL: From bcdn04 at cox.net Wed Mar 18 13:24:11 2015 From: bcdn04 at cox.net (bcdn04 at cox.net) Date: Wed, 18 Mar 2015 6:24:11 -0700 Subject: Job Advert...... Our Company which is based in China is in search of a competent ''Representative Manager'' Let me know if you are interested Message-ID: <20150318092411.5A8ZQ.398691.root@eastrmwml105> From fsateler at debian.org Tue Mar 24 15:18:47 2015 From: fsateler at debian.org (Felipe Sateler) Date: Tue, 24 Mar 2015 12:18:47 -0300 Subject: Bug#781104: Fwd: [pulseaudio-discuss] [ANNOUNCE] PAVUControl 3.0 released! In-Reply-To: <55117DE1.2060206@canonical.com> References: <55117DE1.2060206@canonical.com> Message-ID: Package: pavucontrol Severity: wishlist There is a new upstream release. Filing this so we don't forget. I believe the current patches are all applied, but would need to review that. Saludos ---------- Forwarded message ---------- From: David Henningsson Date: 24 March 2015 at 12:08 Subject: [pulseaudio-discuss] [ANNOUNCE] PAVUControl 3.0 released! To: General PulseAudio Discussion Despite being just PulseAudio's sidekick, Pavucontrol has attracted 14 contributors since last release, saving Pavucontrol from falling into the pit of bitrotting software. Thanks to all of you! Here it is: http://freedesktop.org/software/pulseaudio/pavucontrol/pavucontrol-3.0.tar.xz MD5: 176308d2c03f8f3a7b2bd4f4d284fe71 SHA1: df427f09dbb14ca3200a6eb5e53f9d4138648b5b Shortlog attached - but we have a few new errors handled in better ways, some window sizing management, device visibility is remembered, among other things. Enjoy! -- David Henningsson, Canonical Ltd. https://launchpad.net/~diwic _______________________________________________ pulseaudio-discuss mailing list pulseaudio-discuss at lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss -- Saludos, Felipe Sateler -------------- next part -------------- Akihiro Tsukada (1): sinkwidget: add support for AAC pass-through Alam Arias (1): added back support for gtkmm-2.4 builds Alexander E. Patrakov (2): pavucontrol: ellipsize labels to fix window resizing doc: Adapt the sed expression for cleaning up links Arun Raghavan (2): build-sys: Fix README building build-sys: Don't dist m4/ChangeLog Christer Stenbrenden (1): Don't crash if pa_stream_peek returns NULL David Henningsson (1): build-sys: Release pavucontrol 3.0 Felipe Sateler (1): Handle IO errors in icon setting code Hans de Goede (2): Reference the widget before returning it from ::create methods Do not instantiate cardwidget, devicewidget and rolewidget with a type of EventBox Ivan Ivanov (1): devicewidget, streamwidget: Show only one volume slider when channels are locked Martin Stegh?fer (1): mainwindow: Catch Gdk::PixbufError Pierre Zurek (1): Add a --maximize command line option Simon Johansson (1): Add horizontal scrollbars automatically Steven Dwy (1): mainwindow: Remember device visibility selections Tanu Kaskinen (2): build-sys: Use autoreconf in bootstrap.sh Add TRANSLATORS_README.txt From WilliamsJu at mustangps.org Fri Mar 27 09:56:03 2015 From: WilliamsJu at mustangps.org (Williams, Julie A) Date: Fri, 27 Mar 2015 09:56:03 +0000 Subject: Gesture In-Reply-To: References: Message-ID: ________________________________ From: Williams, Julie A Sent: Friday, March 27, 2015 4:42 AM To: Williams, Julie A Subject: Gesture $ 8,000,000 US Dollars WAS donated to you. Please contact, Name: Mrs Kim George Email: kgeorge25 at qq.com The information contained in this e-mail message, and any files transmitted with it, is confidential and may be legally privileged. It is intended only for the use of the individuals or entities named above. If the reader of this message is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any dissemination, distribution or forwarding of this e-mail message is strictly prohibited. If you have received this e-mail message in error, please notify the sender from Mustang Public Schools and delete the material from any computer. Thank you for your cooperation. -------------- next part -------------- An HTML attachment was scrubbed... URL: From ricardo.enjuto at dip-valladolid.es Sat Mar 28 08:43:22 2015 From: ricardo.enjuto at dip-valladolid.es (Quick Loan) Date: Sat, 28 Mar 2015 09:43:22 +0100 (CET) Subject: 3% Interest Rate Loan Offer!!! Message-ID: <1361757590.541130.1427532202090.JavaMail.zimbra@dip-valladolid.es> We can help you with a genuine loan to meet your needs. Do you need a personal or business loan without stress and quick approval? Do you need an urgent loan today? No Credit Checks * LOAN APPROVAL IN 60MINS !! * GUARANTEED SAME DAY TRANSFER !! * 100% APPROVAL RATE !! * LOW INTEREST RATE !! Contact US for more information about loan offer and we will solve your financial problem. contact us via email: loa101 at foxmail.com -------------------------------- Este mensaje y los ficheros que puedan ser adjuntados son confidenciales. Los mismos contienen informacion reservada que no puede ser difundida. Si usted ha recibido este correo por error, tenga la amabilidad de eliminarlo de su sistema y avisar al remitente mediante reenvio a su direccion electronica; no debera copiar el mensaje ni divulgar su contenido a ninguna persona. Su direccion de correo electronico junto a sus datos personales constan en un fichero titularidad de la Diputacion Provincial de Valladolid cuya finalidad es mantener el contacto con usted. Si quiere saber de que informacion disponemos de Usted, modificarla y en su caso, cancelarla, puede hacerlo presentando o enviando una solicitud por escrito, acompanada de una fotocopia de su DNI, ante la Diputacion Provincial de Valladolid (Registro de entrada). Calle Angustias 44. CP 47003 de Valladolid. Asimismo, es su responsabilidad comprobar que este mensaje o sus archivos adjuntos no contengan virus y, en su caso, eliminarlos. From johnathan.falk at gmail.com Sat Mar 28 22:57:01 2015 From: johnathan.falk at gmail.com (Johnathan Falk) Date: Sat, 28 Mar 2015 15:57:01 -0700 Subject: Bug#781422: pulseaudio: Failed to open module "module-x11-publish". Message-ID: <20150328225701.7408.20153.reportbug@theark.jf.local> Package: pulseaudio Version: 5.0-13 Severity: normal Dear Maintainer, * What led up to the situation? pulseaudio only suggests pulseaudio-module-x11 * What exactly did you do (or not do) that was effective (or ineffective)? installed pulseaudio-module-x11 to get rid of errors * What was the outcome of this action? errors stopped * What outcome did you expect instead? not to have errors when I dont install recomends -- Package-specific info: File '/etc/default/pulseaudio' does not exist -- System Information: Debian Release: 8.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages pulseaudio depends on: ii adduser 3.113+nmu3 ii libasound2 1.0.28-1 ii libasound2-plugins 1.0.28-1+b1 ii libc6 2.19-17 ii libcap2 1:2.24-7 ii libdbus-1-3 1.8.16-1 ii libfftw3-single3 3.3.4-2 ii libgcc1 1:4.9.2-10 ii libice6 2:1.0.9-1+b1 ii libltdl7 2.4.2-1.11 ii liborc-0.4-0 1:0.4.22-1 ii libpulse0 5.0-13 ii libsamplerate0 0.1.8-8 ii libsm6 2:1.2.2-1+b1 ii libsndfile1 1.0.25-9.1 ii libspeexdsp1 1.2~rc1.2-1 ii libstdc++6 4.9.2-10 ii libsystemd0 215-13 ii libtdb1 1.3.4-1 ii libudev1 215-13 ii libwebrtc-audio-processing-0 0.1-3 ii libx11-6 2:1.6.2-3 ii libx11-xcb1 2:1.6.2-3 ii libxcb1 1.10-3+b1 ii libxtst6 2:1.2.2-1+b1 ii lsb-base 4.1+Debian13+nmu1 ii pulseaudio-utils 5.0-13 ii udev 215-13 Versions of packages pulseaudio recommends: ii pulseaudio-module-x11 5.0-13 pn rtkit Versions of packages pulseaudio suggests: pn paman pn paprefs pn pavucontrol pn pavumeter -- no debconf information -------------- next part -------------- # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for PulseAudio clients. See pulse-client.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; default-sink = ; default-source = ; default-server = ; default-dbus-server = ; autospawn = yes ; daemon-binary = /usr/bin/pulseaudio ; extra-arguments = --log-target=syslog ; cookie-file = ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; auto-connect-localhost = no ; auto-connect-display = no -------------- next part -------------- # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 # resample-method defaults to speex-float-1 on most architectures, # speex-fixed-1 on ARM ; resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no ; flat-volumes = yes ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; alternate-sample-rate = 48000 ; default-sample-channels = 2 ; default-channel-map = front-left,front-right ; default-fragments = 4 ; default-fragment-size-msec = 25 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0 -------------- next part -------------- #!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software Foundation, # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) .nofail ### Load something into the sample cache #load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav #load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav #load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav #load-sample-lazy pulse-access /usr/share/sounds/generic.wav .fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Should be after module-*-restore but before module-*-detect load-module module-switch-on-port-available ### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev support) load-module module-detect .endif ### Automatically connect sink and source if JACK server is present .ifexists module-jackdbus-detect.so .nofail load-module module-jackdbus-detect channels=2 .fail .endif ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-policy.so load-module module-bluetooth-policy .endif .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp #load-module module-zeroconf-publish ### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. .ifexists module-gconf.so .nofail load-module module-gconf .fail .endif ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. .ifexists module-console-kit.so load-module module-console-kit .endif .ifexists module-systemd-login.so load-module module-systemd-login .endif ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music/video streams when a phone stream is active load-module module-role-cork ### Modules to allow autoloading of filters (such as echo cancellation) ### on demand. module-filter-heuristics tries to determine what filters ### make sense, and module-filter-apply does the heavy-lifting of ### loading modules and rerouting streams. load-module module-filter-heuristics load-module module-filter-apply # X11 modules should not be started from default.pa so that one daemon # can be shared by multiple sessions. ### Load X11 bell module #load-module module-x11-bell sample=bell-windowing-system ### Register ourselves in the X11 session manager #load-module module-x11-xsmp ### Publish connection data in the X11 root window #.ifexists module-x11-publish.so #.nofail #load-module module-x11-publish #.fail #.endif ### Make some devices default #set-default-sink output #set-default-source input -------------- next part -------------- #!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software Foundation, # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. # This startup script is used only if PulseAudio is started in system # mode. ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev/hal support) load-module module-detect .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Automatically restore the volume of streams and devices load-module module-stream-restore load-module module-device-restore ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### Enable positioned event sounds load-module module-position-event-sounds -------------- next part -------------- default Playback/recording through the PulseAudio sound server null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server sysdefault:CARD=PCH HDA Intel PCH, VT2020 Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, VT2020 Analog Front speakers surround21:CARD=PCH,DEV=0 HDA Intel PCH, VT2020 Analog 2.1 Surround output to Front and Subwoofer speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, VT2020 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, VT2020 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, VT2020 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, VT2020 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, VT2020 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=PCH,DEV=0 HDA Intel PCH, VT2020 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=PCH,DEV=0 HDA Intel PCH, HDMI 0 HDMI Audio Output dmix:CARD=PCH,DEV=0 HDA Intel PCH, VT2020 Analog Direct sample mixing device dmix:CARD=PCH,DEV=1 HDA Intel PCH, VT2020 Digital Direct sample mixing device dmix:CARD=PCH,DEV=2 HDA Intel PCH, VT2020 Alt Analog Direct sample mixing device dmix:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, VT2020 Analog Direct sample snooping device dsnoop:CARD=PCH,DEV=1 HDA Intel PCH, VT2020 Digital Direct sample snooping device dsnoop:CARD=PCH,DEV=2 HDA Intel PCH, VT2020 Alt Analog Direct sample snooping device dsnoop:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, VT2020 Analog Direct hardware device without any conversions hw:CARD=PCH,DEV=1 HDA Intel PCH, VT2020 Digital Direct hardware device without any conversions hw:CARD=PCH,DEV=2 HDA Intel PCH, VT2020 Alt Analog Direct hardware device without any conversions hw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, VT2020 Analog Hardware device with all software conversions plughw:CARD=PCH,DEV=1 HDA Intel PCH, VT2020 Digital Hardware device with all software conversions plughw:CARD=PCH,DEV=2 HDA Intel PCH, VT2020 Alt Analog Hardware device with all software conversions plughw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Hardware device with all software conversions -------------- next part -------------- Card #0 Name: alsa_card.pci-0000_00_1b.0 Driver: module-alsa-card.c Owner Module: 6 Properties: alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xf7d10000 irq 49" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "1e20" device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller" device.form_factor = "internal" device.string = "0" device.description = "Built-in Audio" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Profiles: input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 60, available: yes) output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6000, available: yes) output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6060, available: yes) output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 700, available: yes) output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760, available: yes) output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 800, available: yes) output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860, available: yes) output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 700, available: yes) output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760, available: yes) output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 800, available: yes) output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860, available: yes) output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes) output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5560, available: yes) output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5400, available: yes) output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5460, available: yes) off: Off (sinks: 0, sources: 0, priority: 0, available: yes) Active Profile: output:hdmi-stereo+input:analog-stereo Ports: analog-input-front-mic: Front Microphone (priority: 8500, latency offset: 0 usec, not available) Properties: device.icon_name = "audio-input-microphone" Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo analog-input-rear-mic: Rear Microphone (priority: 8200, latency offset: 0 usec, not available) Properties: device.icon_name = "audio-input-microphone" Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo analog-input-linein: Line In (priority: 8100, latency offset: 0 usec, not available) Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo analog-output-lineout: Line Out (priority: 9900, latency offset: 0 usec, not available) Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo analog-output-headphones: Headphones (priority: 9000, latency offset: 0 usec, not available) Properties: device.icon_name = "audio-headphones" Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo iec958-stereo-output: Digital Output (S/PDIF) (priority: 0, latency offset: 0 usec) Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, available) Properties: device.icon_name = "video-display" device.product.name = "SHARP HDMI" Part of profile(s): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo -------------- next part -------------- Sink #0 State: IDLE Name: alsa_output.pci-0000_00_1b.0.hdmi-stereo Description: Built-in Audio Digital Stereo (HDMI) Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 6 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor Source: alsa_output.pci-0000_00_1b.0.hdmi-stereo.monitor Latency: 331009 usec, configured 371519 usec Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS Properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "HDMI 0" alsa.id = "HDMI 0" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "3" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xf7d10000 irq 49" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "1e20" device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller" device.form_factor = "internal" device.string = "hdmi:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "hdmi-stereo" device.profile.description = "Digital Stereo (HDMI)" device.description = "Built-in Audio Digital Stereo (HDMI)" alsa.mixer_name = "Intel PantherPoint HDMI" alsa.components = "HDA:11060441,1458a014,00100100 HDA:80862806,80860101,00100000" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Ports: hdmi-output-0: HDMI / DisplayPort (priority: 5900, available) Active Port: hdmi-output-0 Formats: pcm -------------- next part -------------- Source #0 State: IDLE Name: alsa_output.pci-0000_00_1b.0.hdmi-stereo.monitor Description: Monitor of Built-in Audio Digital Stereo (HDMI) Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 6 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: alsa_output.pci-0000_00_1b.0.hdmi-stereo Latency: 0 usec, configured 371519 usec Flags: DECIBEL_VOLUME LATENCY Properties: device.description = "Monitor of Built-in Audio Digital Stereo (HDMI)" device.class = "monitor" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xf7d10000 irq 49" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "1e20" device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller" device.form_factor = "internal" device.string = "0" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Formats: pcm Source #1 State: IDLE Name: alsa_input.pci-0000_00_1b.0.analog-stereo Description: Built-in Audio Analog Stereo Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 6 Mute: yes Volume: front-left: 11002 / 17% / -46.50 dB, front-right: 11002 / 17% / -46.50 dB balance 0.00 Base Volume: 20724 / 32% / -30.00 dB Monitor of Sink: n/a Latency: 37595 usec, configured 371519 usec Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY Properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "VT2020 Analog" alsa.id = "VT2020 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xf7d10000 irq 49" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "1e20" device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Built-in Audio Analog Stereo" alsa.mixer_name = "Intel PantherPoint HDMI" alsa.components = "HDA:11060441,1458a014,00100100 HDA:80862806,80860101,00100000" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Ports: analog-input-front-mic: Front Microphone (priority: 8500, not available) analog-input-rear-mic: Rear Microphone (priority: 8200, not available) analog-input-linein: Line In (priority: 8100, not available) Active Port: analog-input-linein Formats: pcm -------------- next part -------------- Module #0 Name: module-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute state of devices" module.version = "5.0" Module #1 Name: module-stream-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute/device state of streams" module.version = "5.0" Module #2 Name: module-card-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore profile of cards" module.version = "5.0" Module #3 Name: module-augment-properties Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Augment the property sets of streams with additional static information" module.version = "5.0" Module #4 Name: module-switch-on-port-available Argument: Usage counter: n/a Properties: Module #5 Name: module-udev-detect Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Detect available audio hardware and load matching drivers" module.version = "5.0" Module #6 Name: module-alsa-card Argument: device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1" Usage counter: 0 Properties: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "5.0" Module #7 Name: module-native-protocol-unix Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Native protocol (UNIX sockets)" module.version = "5.0" Module #8 Name: module-default-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the default sink and source" module.version = "5.0" Module #9 Name: module-rescue-streams Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "When a sink/source is removed, try to move its streams to the default sink/source" module.version = "5.0" Module #10 Name: module-always-sink Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Always keeps at least one sink loaded even if it's a null one" module.version = "5.0" Module #11 Name: module-intended-roles Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically set device of streams based on intended roles of devices" module.version = "5.0" Module #12 Name: module-suspend-on-idle Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "When a sink/source is idle for too long, suspend it" module.version = "5.0" Module #13 Name: module-console-kit Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Create a client for each ConsoleKit session of this user" module.version = "5.0" Module #14 Name: module-systemd-login Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Create a client for each login session of this user" module.version = "5.0" Module #15 Name: module-position-event-sounds Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them." module.version = "5.0" Module #16 Name: module-role-cork Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Mute & cork streams with certain roles while others exist" module.version = "5.0" Module #17 Name: module-filter-heuristics Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Detect when various filters are desirable" module.version = "5.0" Module #18 Name: module-filter-apply Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Load filter sinks automatically when needed" module.version = "5.0" -------------- next part -------------- Server String: /run/user/1000/pulse/native Library Protocol Version: 29 Server Protocol Version: 29 Is Local: yes Client Index: 8 Tile Size: 65472 User Name: jdfalk Host Name: theark Server Name: pulseaudio Server Version: 5.0 Default Sample Specification: s16le 2ch 44100Hz Default Channel Map: front-left,front-right Default Sink: alsa_output.pci-0000_00_1b.0.hdmi-stereo Default Source: alsa_input.pci-0000_00_1b.0.analog-stereo Cookie: 5545:e205 From mrufatto at pederneiras.sp.gov.br Sun Mar 29 13:10:25 2015 From: mrufatto at pederneiras.sp.gov.br (Record@Home) Date: Sun, 29 Mar 2015 10:10:25 -0300 (BRT) Subject: Dringende Aandacht Message-ID: <1585849153.1268148.1427634625978.JavaMail.zimbra@pederneiras.sp.gov.br> Beste Record Bank-klant, De Record Bank spendeert veel aandacht en zorg aan de beveiliging en integriteit van al onze bankrekeningen. Graag vragen wij u dan ook aandacht voor het volgende. Afgelopen jaar is de Record Bank, samen met vele andere Belgische banken, doelwit geworden van grootschalige internetfraude. Daarom zijn wij de afgelopen maanden een project gestart om dit te bestrijden. Alle online bankrekeningen dienen te worden gekoppeld aan een nieuw ontwikkeld beveiligingssysteem, waarmee verdachte bewegingen en ontwikkelingen op uw online bankrekening sneller worden getraceerd en opgelost. Er is geconstateerd dat uw online Record Bank rekening nog niet voorzien is van het nieuwe beveiligingssysteem. Om de beveiliging van uw account te voltooien dient u de update compleet te maken met de onderstaande link. Klik hier(Let op: ondervindt u problemen met het klikken van de link, verplaats dan de mail van uw SPAM naar uw PostvakIn) Na de uitvoering van de update zal er door een van onze medewerkers nog contact met u worden opgenomen om het gehele proces te volbrengen. Zodra het gehele proces gereed is zal u weer als van ouds gebruik kunnen maken van het online bankieren via Record at Home. Onze dienstverlening draait om vertrouwen en het dienen van uw belang. Daarop kunt u als klant vertrouwen. Wij danken u alvast voor uw medewerking. Met vriendelijke groet, Klantcontact Record Bank Belgi? ? 2015 Record Bank NV, alle rechten voorbehouden -------------- next part -------------- An HTML attachment was scrubbed... URL: From owner at bugs.debian.org Sun Mar 29 22:48:07 2015 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sun, 29 Mar 2015 22:48:07 +0000 Subject: Processed: your mail References: <551880AE.70702@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > reassign 781198 libpulse0 5.0-13 Bug #781198 [pidgin] pidgin: Pidgin crashes after some time Bug reassigned from package 'pidgin' to 'libpulse0'. No longer marked as found in versions pidgin/2.10.11-1. Ignoring request to alter fixed versions of bug #781198 to the same values previously set Bug #781198 [libpulse0] pidgin: Pidgin crashes after some time Marked as found in versions pulseaudio/5.0-13. > End of message, stopping processing here. Please contact me if you need assistance. -- 781198: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=781198 Debian Bug Tracking System Contact owner at bugs.debian.org with problems