[Pkg-utopia-maintainers] Bug#465471: Bug#465471: network-manager: fails to execute my firewall script
Mark Hedges
hedges at scriptdolphin.org
Fri Apr 4 01:55:36 UTC 2008
On Thu, 3 Apr 2008, Michael Biebl wrote:
> hedges wrote:
> > Package: network-manager
> > Followup-For: Bug #465471
> >
> > I have to run my firewall script manually after the interface
> > wlan0_rename comes up and the applet tells me it's connected.
>
> Do you rename your interface by udev? wlan0_rename should only be a
> temporary name. Maybe this is the problem.
That seems to be the default behavior of udev. How do I figure
that out or change it?
eth2 is the actual device. This used to work with ipw3945 but
does not work with iwl3945. With iwl3945 (finally) it does work
as wlan but when it boots it tries to send DHCP out on eth2 but
it says 'no such device' or something or stalls until I hit
ctl-C or let it time out.
Let me know what more info I can provide... `dmesg` output is
below `ifconfig`.
eth1 Link encap:Ethernet HWaddr 00:16:d3:c8:63:07
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Base address:0x1840 Memory:fe000000-fe020000
eth2 Link encap:UNSPEC HWaddr 00-1B-77-7C-9A-A5-77-6C-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:17 errors:0 dropped:0 overruns:0 frame:0
TX packets:17 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1004 (1004.0 B) TX bytes:1004 (1004.0 B)
wlan0_rename Link encap:Ethernet HWaddr 00:1b:77:7c:9a:a5
inet addr:192.168.182.29 Bcast:192.168.182.255 Mask:255.255.255.0
inet6 addr: fe80::21b:77ff:fe7c:9aa5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:858 errors:0 dropped:0 overruns:0 frame:0
TX packets:788 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:469851 (458.8 KiB) TX bytes:92629 (90.4 KiB)
Initializing cgroup subsys cpuset
Linux version 2.6.24+maggie-2.6.24-1.7-iwl (2.6.24-4) (root at maggie) (gcc version 4.2.3 (Debian 4.2.3-1)) #1 SMP PREEMPT Thu Feb 28 20:37:51 PST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007d6b0000 (usable)
BIOS-e820: 000000007d6b0000 - 000000007d6cc000 (ACPI data)
BIOS-e820: 000000007d6cc000 - 000000007d700000 (ACPI NVS)
BIOS-e820: 000000007d700000 - 000000007e000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1110MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6980
Entering add_active_range(0, 0, 513712) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 513712
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 513712
On node 0 totalpages: 513712
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2221 pages used for memmap
HighMem zone: 282115 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F6950, 0024 (r2 LENOVO)
ACPI: XSDT 7D6BD728, 0094 (r1 LENOVO TP-7N 1060 LTP 0)
ACPI: FACP 7D6BD800, 00F4 (r3 LENOVO TP-7N 1060 LNVO 1)
ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
ACPI: DSDT 7D6BDBDB, DF6A (r1 LENOVO TP-7N 1060 MSFT 3000000)
ACPI: FACS 7D6E4000, 0040
ACPI: SSDT 7D6BD9B4, 0227 (r1 LENOVO TP-7N 1060 MSFT 3000000)
ACPI: ECDT 7D6CBB45, 0052 (r1 LENOVO TP-7N 1060 LNVO 1)
ACPI: TCPA 7D6CBB97, 0032 (r2 LENOVO TP-7N 1060 LNVO 1)
ACPI: APIC 7D6CBBC9, 0068 (r1 LENOVO TP-7N 1060 LNVO 1)
ACPI: MCFG 7D6CBC31, 003C (r1 LENOVO TP-7N 1060 LNVO 1)
ACPI: HPET 7D6CBC6D, 0038 (r1 LENOVO TP-7N 1060 LNVO 1)
ACPI: SLIC 7D6CBDF0, 0176 (r1 LENOVO TP-7N 1060 LTP 0)
ACPI: BOOT 7D6CBF66, 0028 (r1 LENOVO TP-7N 1060 LTP 1)
ACPI: ASF! 7D6CBF8E, 0072 (r16 LENOVO TP-7N 1060 PTL 1)
ACPI: SSDT 7D6E26D9, 025F (r1 LENOVO TP-7N 1060 INTL 20050513)
ACPI: SSDT 7D6E2938, 00A6 (r1 LENOVO TP-7N 1060 INTL 20050513)
ACPI: SSDT 7D6E29DE, 04F7 (r1 LENOVO TP-7N 1060 INTL 20050513)
ACPI: SSDT 7D6E2ED5, 01D8 (r1 LENOVO TP-7N 1060 INTL 20050513)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000)
swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 509699
Kernel command line: root=/dev/mapper/sda7_crypt ro
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1995.080 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2027512k/2054848k available (1821k kernel code, 26188k reserved, 714k data, 252k init, 1137344k highmem)
virtual kernel memory layout:
fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0381000 - 0xc03c0000 ( 252 kB)
.data : 0xc02c767f - 0xc037a0b8 ( 714 kB)
.text : 0xc0100000 - 0xc02c767f (1821 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet clockevent registered
Calibrating delay using timer specific routine.. 3993.88 BogoMIPS (lpj=1996942)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3989.99 BogoMIPS (lpj=1994995)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
Total of 2 processors activated (7983.87 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 1112050 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to: check_tsc_sync_source failed.
Brought up 2 CPUs
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Power Resource [PUBS] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnpacpi: exceeded the max number of mem resources: 12
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Time: hpet clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff has been reserved
system 00:00: iomem range 0xe4000-0xe7fff has been reserved
system 00:00: iomem range 0xe8000-0xebfff has been reserved
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x165f could not be reserved
system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: fc000000-fdffffff
PREFETCH window: f8000000-f80fffff
PCI: Bridge: 0000:00:1c.1
IO window: 3000-3fff
MEM window: dc100000-dfcfffff
PREFETCH window: dfe00000-dfefffff
PCI: Bus 6, cardbus bridge: 0000:05:00.0
IO window: 00004000-000040ff
IO window: 00004400-000044ff
PREFETCH window: f4000000-f7ffffff
MEM window: 80000000-83ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 4000-7fff
MEM window: f8300000-fbffffff
PREFETCH window: f4000000-f7ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:05:00.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6074k freed
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
audit(1207273467.730:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 252k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: SSDT 7D6E1D72, 02C4 (r1 PmRef Cpu0Ist 100 INTL 20050513)
ACPI: SSDT 7D6E20BB, 061E (r1 PmRef Cpu0Cst 100 INTL 20050513)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7D6E1CAA, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513)
ACPI: SSDT 7D6E2036, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (45 C)
ACPI: Thermal Zone [THM1] (48 C)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:19.0 to 64
e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:d3:c8:63:07
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfe226c00
usb 1-2: new full speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfe227000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 17 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:05:00.1 to 64
firewire_ohci: Added fw-ohci device 0000:05:00.1, OHCI version 1.10
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 18
ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match, using nr_ports
ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
firewire_core: created new fw device fw0 (0 config rom retries, S400)
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048 at 0xfe226000 port 0xfe226100 irq 221
ata2: SATA max UDMA/133 abar m2048 at 0xfe226000 port 0xfe226180 irq 221
ata3: SATA max UDMA/133 abar m2048 at 0xfe226000 port 0xfe226200 irq 221
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: HTS721010G9SA00, MCZIC14V, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 0)
scsi 0:0:0:0: Direct-Access ATA HTS721010G9SA00 MCZI PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 18, io base 0x000018a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 21, io base 0x000018c0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
udev: renamed network interface eth0 to eth1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 18
ICH8M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x18e0-0x18e7, BIOS settings: hda:pio, hdb:pio
ICH8M: IDE port disabled
Probing IDE interface ide0...
sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel at redhat.com
Attempting manual resume
swsusp: Marking nosave pages: 000000000009d000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
JFS: nTxBlock = 8192, nTxLock = 65536
Non-volatile memory driver v1.2
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SLPB]
Linux agpgart interface v0.102
agpgart: Detected an Intel 965GM Chipset.
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
thinkpad_acpi: ThinkPad ACPI Extras v0.17
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7NET25WW (1.06 ), EC 7MHT24WW-1.02
thinkpad_acpi: Lenovo ThinkPad X61
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
input: ThinkPad Extra Buttons as /class/input/input4
ACPI: Battery Slot [BAT0] (battery present)
input: Video Bus as /class/input/input5
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /class/input/input6
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
ACPI: AC Adapter [AC] (off-line)
Yenta: CardBus bridge found at 0000:05:00.0 [17aa:20c6]
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff
cs: IO port probe 0x4000-0x7fff: clean.
pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
Real Time Clock Driver v1.12ac
ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 22
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:05:00.2 [1180:0822] (rev 21)
ACPI: PCI Interrupt 0000:05:00.2[C] -> GSI 18 (level, low) -> IRQ 23
sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
PCI: Setting latency timer of device 0000:05:00.2 to 64
mmc0: SDHCI at 0xf8301800 irq 23 DMA
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:03:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
phy0: Selected rate control algorithm 'iwl-3945-rs'
ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
PCI: Setting latency timer of device 0000:00:1b.0 to 64
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
udev: renamed network interface wmaster0 to eth2
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input7
thinkpad_ec: thinkpad_ec 0.36 loaded.
hdaps: LENOVO ThinkPad X61 detected, setting orientation 6
hdaps: initial mode latch is 0x05
hdaps: setting ec_rate=250, filter_order=2
hdaps: fake_data_mode set to 0
hdaps: device successfully initialized.
input: ThinkPad HDAPS joystick emulation as /class/input/input8
input: ThinkPad HDAPS accelerometer data as /class/input/input9
hdaps: driver successfully loaded.
tp_smapi 0.36 loading...
tp_smapi successfully loaded (smapi_port=0xb2).
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1004412k swap on /dev/mapper/sda6_crypt. Priority:-1 extents:1 across:1004412k
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
wlan0_rename: Initial auth_alg=0
wlan0_rename: authenticate with AP 00:14:bf:c3:fc:ea
wlan0_rename: RX authentication from 00:14:bf:c3:fc:ea (alg=0 transaction=2 status=0)
wlan0_rename: authenticated
wlan0_rename: associate with AP 00:14:bf:c3:fc:ea
wlan0_rename: RX AssocResp from 00:14:bf:c3:fc:ea (capab=0x401 status=0 aid=2)
wlan0_rename: associated
ADDRCONF(NETDEV_CHANGE): wlan0_rename: link becomes ready
martian source 255.255.255.255 from 192.168.182.1, on dev wlan0_rename
ll header: 00:1b:77:7c:9a:a5:00:14:bf:c3:fc:ea:08:00
martian source 255.255.255.255 from 192.168.182.1, on dev wlan0_rename
ll header: 00:1b:77:7c:9a:a5:00:14:bf:c3:fc:ea:08:00
Clocksource tsc unstable (delta = -108385641 ns)
wlan0_rename: no IPv6 routers present
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=391 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=392 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=393 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=395 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=405 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=406 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=409 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=410 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=412 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=416 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=418 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=420 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=422 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=425 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=427 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=428 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=430 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=432 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:bf:4d:8f:fb:08:00 SRC=192.168.182.31 DST=192.168.182.255 LEN=96 TOS=0x00 PREC=0x00 TTL=128 ID=433 PROTO=UDP SPT=137 DPT=137 LEN=76
IN=wlan0_rename OUT= MAC=ff:ff:ff:ff:ff:ff:00:11:f5:1a:90:04:08:00 SRC=192.168.182.30 DST=192.168.182.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=7531 PROTO=UDP SPT=137 DPT=137 LEN=58
IN=wlan0_rename OUT= MAC=01:00:5e:00:00:01:00:14:bf:c3:fc:e8:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
IN=wlan0_rename OUT= MAC=00:1b:77:7c:9a:a5:00:14:bf:c3:fc:ea:08:00 SRC=192.168.182.1 DST=255.255.255.255 LEN=326 TOS=0x00 PREC=0x00 TTL=16 ID=0 PROTO=UDP SPT=67 DPT=68 LEN=306
IN=wlan0_rename OUT= MAC=01:00:5e:00:00:01:00:14:bf:c3:fc:e8:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
More information about the Pkg-utopia-maintainers
mailing list