[Pkg-utopia-maintainers] Bug#693151: libatasmart4: Reports (incorrectly) that Western Digital My Book 1140 doesn't support SMART

[Dominique Brazziel]

Package: libatasmart4
Version: 0.19-1
Severity: normal

Dear Maintainer,
*** Please consider answering these questions, where appropriate ***

   * What led up to the situation?
	Trying to get SMART data refreshed at regular intervals
   * What exactly did you do (or not do) that was effective (or
     ineffective)?
        udisks --ata-smart-refresh /dev/sdb
   * What was the outcome of this action?
	 udisks --ata-smart-refresh /dev/sdb
	 Refreshing ATA SMART data failed: Device does not support ATA SMART
   * What outcome did you expect instead?
	Showing information for /org/freedesktop/UDisks/devices/sdb
	etc.

    smartctl -a /dev/sdb reports SMART data just fine.  Here is the
output of 'hdparm -I /dev/sdb | grep SMART':

	SMART feature set
	SMART error logging
	SMART self-test
	SMART Command Transport (SCT) feature set
	
Attached is the full hdparm output.

-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 3.2.32-interatom (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages libatasmart4 depends on:
ii  libc6              2.13-35
ii  libudev0           175-7
ii  multiarch-support  2.13-35

libatasmart4 recommends no packages.

libatasmart4 suggests no packages.

-- no debconf information
-------------- next part --------------

/dev/sdb:

ATA device, with non-removable media
	Model Number:       WDC WD20EARS-00MVWB0                    
	Serial Number:      WD-WCAZA8642245
	Firmware Revision:  51.0AB51
	Transport:          Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
Standards:
	Supported: 8 7 6 5 
	Likely used: 8
Configuration:
	Logical		max	current
	cylinders	16383	16383
	heads		16	16
	sectors/track	63	63
	--
	CHS current addressable sectors:   16514064
	LBA    user addressable sectors:  268435455
	LBA48  user addressable sectors: 3907029168
	Logical  Sector size:                   512 bytes
	Physical Sector size:                  4096 bytes
	Logical Sector-0 offset:                  0 bytes
	device size with M = 1024*1024:     1907729 MBytes
	device size with M = 1000*1000:     2000398 MBytes (2000 GB)
	cache/buffer size  = unknown
Capabilities:
	LBA, IORDY(can be disabled)
	Queue depth: 32
	Standby timer values: spec'd by Standard, with device specific minimum
	R/W multiple sector transfer: Max = 16	Current = 0
	DMA: *mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 udma6 
	     Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	     Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
	Enabled	Supported:
	   *	SMART feature set
	    	Security Mode feature set
	   *	Power Management feature set
	   *	Write cache
	   *	Look-ahead
	   *	Host Protected Area feature set
	   *	WRITE_BUFFER command
	   *	READ_BUFFER command
	   *	NOP cmd
	   *	DOWNLOAD_MICROCODE
	    	Power-Up In Standby feature set
	   *	SET_FEATURES required to spinup after power up
	    	SET_MAX security extension
	   *	48-bit Address feature set
	   *	Device Configuration Overlay feature set
	   *	Mandatory FLUSH_CACHE
	   *	FLUSH_CACHE_EXT
	   *	SMART error logging
	   *	SMART self-test
	   *	General Purpose Logging feature set
	   *	64-bit World wide name
	   *	WRITE_UNCORRECTABLE_EXT command
	   *	{READ,WRITE}_DMA_EXT_GPL commands
	   *	Segmented DOWNLOAD_MICROCODE
	   *	Gen1 signaling speed (1.5Gb/s)
	   *	Gen2 signaling speed (3.0Gb/s)
	   *	Native Command Queueing (NCQ)
	   *	Host-initiated interface power management
	   *	Phy event counters
	   *	NCQ priority information
	    	DMA Setup Auto-Activate optimization
	   *	Software settings preservation
	   *	SMART Command Transport (SCT) feature set
	   *	SCT LBA Segment Access (AC2)
	   *	SCT Features Control (AC4)
	   *	SCT Data Tables (AC5)
	    	unknown 206[12] (vendor specific)
	    	unknown 206[13] (vendor specific)
Security: 
	Master password revision code = 65534
		supported
	not	enabled
	not	locked
	not	frozen
	not	expired: security count
		supported: enhanced erase
	388min for SECURITY ERASE UNIT. 388min for ENHANCED SECURITY ERASE UNIT. 
Logical Unit WWN Device Identifier: 50014ee2061774f7
	NAA		: 5
	IEEE OUI	: 0014ee
	Unique ID	: 2061774f7
Checksum: correct