Dumping 90 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
  info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
  info.bus = 'unknown'  (string)
  info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list)
  info.product = 'Computer'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
  power_management.acpi.linux.version = '20070126'  (string)
  power_management.can_hibernate = true  (bool)
  power_management.can_suspend = true  (bool)
  power_management.can_suspend_hybrid = false  (bool)
  power_management.can_suspend_to_disk = true  (bool)
  power_management.can_suspend_to_ram = true  (bool)
  power_management.is_powersave_set = false  (bool)
  power_management.quirk.vbestate_restore = true  (bool)
  power_management.type = 'acpi'  (string)
  smbios.bios.release_date = '12/18/2006'  (string)
  smbios.bios.vendor = 'Phoenix Technologies LTD'  (string)
  smbios.bios.version = '07YA'  (string)
  smbios.chassis.manufacturer = 'SAMSUNG ELECTRONICS CO., LTD.'  (string)
  smbios.chassis.type = 'Other'  (string)
  smbios.system.manufacturer = 'SAMSUNG ELECTRONICS CO., LTD.'  (string)
  smbios.system.product = 'R40/R41'  (string)
  smbios.system.serial = '379L93CP100120'  (string)
  smbios.system.uuid = '60242F21-D21D-B211-8000-83E4A8AD71BF'  (string)
  smbios.system.version = '07YA'  (string)
  system.chassis.manufacturer = 'SAMSUNG ELECTRONICS CO., LTD.'  (string)
  system.chassis.type = 'Other'  (string)
  system.firmware.release_date = '12/18/2006'  (string)
  system.firmware.vendor = 'Phoenix Technologies LTD'  (string)
  system.firmware.version = '07YA'  (string)
  system.formfactor = 'laptop'  (string)
  system.hardware.primary_video.product = 23138  (0x5a62)  (int)
  system.hardware.primary_video.vendor = 4098  (0x1002)  (int)
  system.hardware.product = 'R40/R41'  (string)
  system.hardware.serial = '379L93CP100120'  (string)
  system.hardware.uuid = '60242F21-D21D-B211-8000-83E4A8AD71BF'  (string)
  system.hardware.vendor = 'SAMSUNG ELECTRONICS CO., LTD.'  (string)
  system.hardware.version = '07YA'  (string)
  system.kernel.machine = 'x86_64'  (string)
  system.kernel.name = 'Linux'  (string)
  system.kernel.version = '2.6.24-1-amd64'  (string)
  system.product = 'R40/R41 07YA'  (string)
  system.vendor = 'SAMSUNG ELECTRONICS CO., LTD.'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_ADP1'
  ac_adapter.present = true  (bool)
  info.capabilities = {'ac_adapter'} (string list)
  info.category = 'ac_adapter'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AC Adapter'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_ADP1'  (string)
  linux.acpi_path = '/proc/acpi/ac_adapter/ADP1'  (string)
  linux.acpi_type = 3  (0x3)  (int)
  linux.hotplug_type = 4  (0x4)  (int)

udi = '/org/freedesktop/Hal/devices/acpi_FAN0'
  fan.enabled = false  (bool)
  info.capabilities = {'fan'} (string list)
  info.category = 'fan'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Fan'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_FAN0'  (string)
  linux.acpi_path = '/proc/acpi/fan/FAN0'  (string)
  linux.acpi_type = 2  (0x2)  (int)
  linux.hotplug_type = 4  (0x4)  (int)

udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0'  (string)
  linux.acpi_path = '/proc/acpi/processor/CPU0'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = true  (bool)
  processor.number = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1'  (string)
  linux.acpi_path = '/proc/acpi/processor/CPU1'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = true  (bool)
  processor.number = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/acpi_BAT1'
  battery.charge_level.capacity_state = 'ok'  (string)
  battery.charge_level.current = 45510  (0xb1c6)  (int)
  battery.charge_level.design = 44400  (0xad70)  (int)
  battery.charge_level.granularity_1 = 11  (0xb)  (int)
  battery.charge_level.granularity_2 = 11  (0xb)  (int)
  battery.charge_level.last_full = 45510  (0xb1c6)  (int)
  battery.charge_level.low = 1365  (0x555)  (int)
  battery.charge_level.percentage = 100  (0x64)  (int)
  battery.charge_level.rate = 0  (0x0)  (int)
  battery.charge_level.unit = 'mWh'  (string)
  battery.charge_level.warning = 0  (0x0)  (int)
  battery.is_rechargeable = true  (bool)
  battery.model = ''  (string)
  battery.present = true  (bool)
  battery.rechargeable.is_charging = false  (bool)
  battery.rechargeable.is_discharging = false  (bool)
  battery.reporting.current = 4100  (0x1004)  (int)
  battery.reporting.design = 4000  (0xfa0)  (int)
  battery.reporting.granularity_1 = 1  (0x1)  (int)
  battery.reporting.granularity_2 = 1  (0x1)  (int)
  battery.reporting.last_full = 4100  (0x1004)  (int)
  battery.reporting.low = 123  (0x7b)  (int)
  battery.reporting.rate = 0  (0x0)  (int)
  battery.reporting.technology = 'LION'  (string)
  battery.reporting.unit = 'mAh'  (string)
  battery.reporting.warning = 0  (0x0)  (int)
  battery.technology = 'lithium-ion'  (string)
  battery.type = 'primary'  (string)
  battery.vendor = 'SAMSUNG'  (string)
  battery.voltage.current = 12528  (0x30f0)  (int)
  battery.voltage.design = 11100  (0x2b5c)  (int)
  battery.voltage.unit = 'mV'  (string)
  info.capabilities = {'battery'} (string list)
  info.category = 'battery'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Battery Bay'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_BAT1'  (string)
  linux.acpi_path = '/proc/acpi/battery/BAT1'  (string)
  linux.acpi_type = 0  (0x0)  (int)
  linux.hotplug_type = 4  (0x4)  (int)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
  alsa.device_file = '/dev/snd/timer'  (string)
  alsa.type = 'timer'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Timer Device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'  (string)
  linux.device_file = '/dev/snd/timer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/class/sound/timer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
  info.capabilities = {'oss'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'OSS Sequencer Device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'  (string)
  linux.device_file = '/dev/sequencer2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/class/sound/sequencer2'  (string)
  oss.device_file = '/dev/sequencer2'  (string)
  oss.type = 'sequencer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
  info.capabilities = {'oss'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'OSS Sequencer Device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'  (string)
  linux.device_file = '/dev/sequencer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/class/sound/sequencer'  (string)
  oss.device_file = '/dev/sequencer'  (string)
  oss.type = 'sequencer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
  alsa.device_file = '/dev/snd/seq'  (string)
  alsa.type = 'sequencer'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Sequencer Device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'  (string)
  linux.device_file = '/dev/snd/seq'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/class/sound/seq'  (string)

udi = '/org/freedesktop/Hal/devices/computer_power_supply_0'
  battery.charge_level.current = 4100  (0x1004)  (int)
  battery.charge_level.last_full = 4100  (0x1004)  (int)
  battery.charge_level.percentage = 100  (0x64)  (int)
  battery.charge_level.rate = 0  (0x0)  (int)
  battery.current = 0  (0x0)  (int)
  battery.present = true  (bool)
  battery.rechargeable.is_charging = false  (bool)
  battery.rechargeable.is_discharging = false  (bool)
  battery.reporting.current = 4100  (0x1004)  (int)
  battery.reporting.design = 4000  (0xfa0)  (int)
  battery.reporting.last_full = 4100  (0x1004)  (int)
  battery.reporting.technology = 'Li-ion'  (string)
  battery.reporting.unit = 'mAh'  (string)
  battery.technology = 'lithium-ion'  (string)
  battery.type = 'primary'  (string)
  battery.vendor = 'SAMSUNG Electronics'  (string)
  battery.voltage.current = 12520  (0x30e8)  (int)
  info.capabilities = {'battery'} (string list)
  info.category = 'battery'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Li-ion'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'power_supply'  (string)
  linux.sysfs_path = '/sys/class/power_supply/BAT1'  (string)

udi = '/org/freedesktop/Hal/devices/computer_power_supply'
  ac_adapter.present = true  (bool)
  info.capabilities = {'ac_adapter'} (string list)
  info.category = 'ac_adapter'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Generic AC Adapter Device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_power_supply'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'power_supply'  (string)
  linux.sysfs_path = '/sys/class/power_supply/ADP1'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Video Bus'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4'  (string)
  input.device = '/dev/input/event7'  (string)
  input.product = 'Video Bus'  (string)
  input.xkb.layout = 'us'  (string)
  input.xkb.model = 'evdev'  (string)
  input.xkb.rules = 'base'  (string)
  input.xkb.variant = ''  (string)
  linux.device_file = '/dev/input/event7'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input7/event7'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'
  button.has_state = false  (bool)
  button.type = 'sleep'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Sleep Button (CM)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'  (string)
  input.device = '/dev/input/event6'  (string)
  input.product = 'Sleep Button (CM)'  (string)
  linux.device_file = '/dev/input/event6'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input6/event6'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
  button.has_state = true  (bool)
  button.state.value = false  (bool)
  button.type = 'lid'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'input.switch', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Lid Switch'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'  (string)
  input.device = '/dev/input/event5'  (string)
  input.product = 'Lid Switch'  (string)
  linux.device_file = '/dev/input/event5'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input5/event5'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (CM)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'  (string)
  input.device = '/dev/input/event4'  (string)
  input.product = 'Power Button (CM)'  (string)
  linux.device_file = '/dev/input/event4'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input4/event4'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (FF)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'  (string)
  input.device = '/dev/input/event3'  (string)
  input.product = 'Power Button (FF)'  (string)
  linux.device_file = '/dev/input/event3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input3/event3'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
  info.capabilities = {'input', 'input.mouse'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Macintosh mouse button emulation'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'  (string)
  input.device = '/dev/input/event0'  (string)
  input.product = 'Macintosh mouse button emulation'  (string)
  linux.device_file = '/dev/input/event0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input0/event0'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
  info.bus = 'pnp'  (string)
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'System Board'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:09'  (string)
  pnp.description = 'System Board'  (string)
  pnp.id = 'PNP0c01'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
  info.bus = 'pnp'  (string)
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:08'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
  info.bus = 'pnp'  (string)
  info.linux.driver = 'i8042 aux'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PS/2 Port for PS/2-style Mice'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:07'  (string)
  pnp.description = 'PS/2 Port for PS/2-style Mice'  (string)
  pnp.id = 'PNP0f13'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
  info.bus = 'pnp'  (string)
  info.linux.driver = 'i8042 kbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:06'  (string)
  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  pnp.id = 'PNP0303'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
  info.bus = 'pnp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT-style speaker sound'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:05'  (string)
  pnp.description = 'AT-style speaker sound'  (string)
  pnp.id = 'PNP0800'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
  info.bus = 'pnp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT Real-Time Clock'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:04'  (string)
  pnp.description = 'AT Real-Time Clock'  (string)
  pnp.id = 'PNP0b00'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
  info.bus = 'pnp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Math Coprocessor'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:03'  (string)
  pnp.description = 'Math Coprocessor'  (string)
  pnp.id = 'PNP0c04'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
  info.bus = 'pnp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT DMA Controller'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:02'  (string)
  pnp.description = 'AT DMA Controller'  (string)
  pnp.id = 'PNP0200'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
  info.bus = 'pnp'  (string)
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:01'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
  info.bus = 'pnp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PCI Bus'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:00'  (string)
  pnp.description = 'PCI Bus'  (string)
  pnp.id = 'PNP0a03'  (string)

udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
  info.bus = 'platform'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (vesafb.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/vesafb.0'  (string)
  platform.id = 'vesafb.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
  info.bus = 'platform'  (string)
  info.linux.driver = 'serial8250'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (serial8250)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/serial8250'  (string)
  platform.id = 'serial8250'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
  info.bus = 'platform'  (string)
  info.linux.driver = 'pcspkr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (pcspkr)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/pcspkr'  (string)
  platform.id = 'pcspkr'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
  info.capabilities = {'input'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  info.product = 'PC Speaker'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'  (string)
  input.device = '/dev/input/event2'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  input.physical_device = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  input.product = 'PC Speaker'  (string)
  linux.device_file = '/dev/input/event2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input2/event2'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042'
  info.bus = 'platform'  (string)
  info.linux.driver = 'i8042'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (i8042)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042'  (string)
  platform.id = 'i8042'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'
  info.bus = 'serio'  (string)
  info.linux.driver = 'psmouse'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 AUX3 port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio4'  (string)
  serio.description = 'i8042 AUX3 port'  (string)
  serio.id = 'serio4'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input'
  info.capabilities = {'input', 'input.touchpad'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'  (string)
  info.product = 'SynPS/2 Synaptics TouchPad'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input'  (string)
  input.device = '/dev/input/event8'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'  (string)
  input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'  (string)
  input.product = 'SynPS/2 Synaptics TouchPad'  (string)
  linux.device_file = '/dev/input/event8'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input8/event8'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port'
  info.bus = 'serio'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 AUX2 port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio3'  (string)
  serio.description = 'i8042 AUX2 port'  (string)
  serio.id = 'serio3'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port'
  info.bus = 'serio'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 AUX1 port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio2'  (string)
  serio.description = 'i8042 AUX1 port'  (string)
  serio.id = 'serio2'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port'
  info.bus = 'serio'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 AUX0 port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'  (string)
  serio.description = 'i8042 AUX0 port'  (string)
  serio.id = 'serio1'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
  info.bus = 'serio'  (string)
  info.linux.driver = 'atkbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 KBD port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'  (string)
  serio.description = 'i8042 KBD port'  (string)
  serio.id = 'serio0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  info.product = 'AT Translated Set 2 keyboard'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'  (string)
  input.device = '/dev/input/event1'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  input.product = 'AT Translated Set 2 keyboard'  (string)
  input.xkb.layout = 'us'  (string)
  input.xkb.model = 'evdev'  (string)
  input.xkb.rules = 'base'  (string)
  input.xkb.variant = ''  (string)
  linux.device_file = '/dev/input/event1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input1/event1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4371'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'IXP SB400 PCI-PCI Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4371'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 1  (0x1)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4'  (string)
  pci.product = 'IXP SB400 PCI-PCI Bridge'  (string)
  pci.product_id = 17265  (0x4371)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_852'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4371'  (string)
  info.product = 'xD-Picture Card Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_852'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:09.4'  (string)
  pci.device_class = 8  (0x8)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:09.4'  (string)
  pci.product = 'xD-Picture Card Controller'  (string)
  pci.product_id = 2130  (0x852)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_592'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4371'  (string)
  info.product = 'R5C592 Memory Stick Bus Host Adapter'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_592'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:09.3'  (string)
  pci.device_class = 8  (0x8)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:09.3'  (string)
  pci.product = 'R5C592 Memory Stick Bus Host Adapter'  (string)
  pci.product_id = 1426  (0x592)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_843'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4371'  (string)
  info.product = 'R5C843 MMC Host Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_843'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:09.2'  (string)
  pci.device_class = 8  (0x8)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:09.2'  (string)
  pci.product = 'R5C843 MMC Host Controller'  (string)
  pci.product_id = 2115  (0x843)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_822'
  info.bus = 'pci'  (string)
  info.linux.driver = 'sdhci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4371'  (string)
  info.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_822'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:09.1'  (string)
  pci.device_class = 8  (0x8)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 5  (0x5)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:09.1'  (string)
  pci.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter'  (string)
  pci.product_id = 2082  (0x822)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host'
  info.capabilities = {'mmc_host'} (string list)
  info.category = 'mmc_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1180_822'  (string)
  info.product = 'MMC/SD Host Adapter'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'mmc_host'  (string)
  linux.sysfs_path = '/sys/class/mmc_host/mmc0'  (string)
  mmc_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_476'
  info.bus = 'pci'  (string)
  info.linux.driver = 'yenta_cardbus'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4371'  (string)
  info.product = 'RL5c476 II'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_476'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:09.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 7  (0x7)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:09.0'  (string)
  pci.product = 'RL5c476 II'  (string)
  pci.product_id = 1142  (0x476)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_168c_1a'
  info.bus = 'pci'  (string)
  info.linux.driver = 'ath5k_pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4371'  (string)
  info.product = 'AR2413 802.11bg NIC'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_168c_1a'  (string)
  info.vendor = 'Atheros Communications, Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:07.0'  (string)
  pci.device_class = 2  (0x2)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:07.0'  (string)
  pci.product = 'AR2413 802.11bg NIC'  (string)
  pci.product_id = 26  (0x1a)  (int)
  pci.subsys_product_id = 28929  (0x7101)  (int)
  pci.subsys_vendor = 'Askey Computer Corp.'  (string)
  pci.subsys_vendor_id = 5199  (0x144f)  (int)
  pci.vendor = 'Atheros Communications, Inc.'  (string)
  pci.vendor_id = 5772  (0x168c)  (int)

udi = '/org/freedesktop/Hal/devices/net_00_16_e3_aa_ce_32_0'
  info.capabilities = {'net', 'net.80211control'} (string list)
  info.category = 'net.80211control'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_168c_1a'  (string)
  info.product = 'Networking Wireless Control Interface'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_16_e3_aa_ce_32_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/class/net/wmaster0'  (string)
  net.address = '00:16:e3:aa:ce:32'  (string)
  net.arp_proto_hw_id = 801  (0x321)  (int)
  net.interface = 'wmaster0'  (string)
  net.linux.ifindex = 3  (0x3)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_168c_1a'  (string)
  net.physical_device = '/org/freedesktop/Hal/devices/pci_168c_1a'  (string)

udi = '/org/freedesktop/Hal/devices/net_00_16_e3_aa_ce_32'
  info.capabilities = {'net', 'net.80211'} (string list)
  info.category = 'net.80211'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_168c_1a'  (string)
  info.product = 'WLAN Interface'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_16_e3_aa_ce_32'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/class/net/wlan0'  (string)
  net.80211.mac_address = 98308902450  (0x16e3aace32)  (uint64)
  net.address = '00:16:e3:aa:ce:32'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'wlan0'  (string)
  net.linux.ifindex = 4  (0x4)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_168c_1a'  (string)
  net.physical_device = '/org/freedesktop/Hal/devices/pci_168c_1a'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10ec_8139'
  info.bus = 'pci'  (string)
  info.linux.driver = '8139too'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4371'  (string)
  info.product = 'RTL-8139/8139C/8139C+'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8139'  (string)
  info.vendor = 'Realtek Semiconductor Co., Ltd.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:05.0'  (string)
  pci.device_class = 2  (0x2)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:05.0'  (string)
  pci.product = 'RTL-8139/8139C/8139C+'  (string)
  pci.product_id = 33081  (0x8139)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'Realtek Semiconductor Co., Ltd.'  (string)
  pci.vendor_id = 4332  (0x10ec)  (int)

udi = '/org/freedesktop/Hal/devices/net_00_13_77_33_e3_46'
  info.capabilities = {'net', 'net.80203'} (string list)
  info.category = 'net.80203'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8139'  (string)
  info.product = 'Networking Interface'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_13_77_33_e3_46'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/class/net/eth0'  (string)
  net.80203.mac_address = 83604267846  (0x137733e346)  (uint64)
  net.address = '00:13:77:33:e3:46'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'eth0'  (string)
  net.linux.ifindex = 2  (0x2)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_10ec_8139'  (string)
  net.physical_device = '/org/freedesktop/Hal/devices/pci_10ec_8139'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4377'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'IXP SB400 PCI-ISA Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4377'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.3'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.3'  (string)
  pci.product = 'IXP SB400 PCI-ISA Bridge'  (string)
  pci.product_id = 17271  (0x4377)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_437b'
  info.bus = 'pci'  (string)
  info.linux.driver = 'HDA Intel'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'SB450 HDA Audio'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2'  (string)
  pci.device_class = 4  (0x4)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2'  (string)
  pci.product = 'SB450 HDA Audio'  (string)
  pci.product_id = 17275  (0x437b)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_437b_alsa_playback_6'
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA ATI SB'  (string)
  alsa.device = 6  (0x6)  (int)
  alsa.device_file = '/dev/snd/pcmC0D6p'  (string)
  alsa.device_id = 'Si3054 Modem'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  alsa.pcm_class = 'modem'  (string)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  alsa.type = 'playback'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  info.product = 'Si3054 Modem ALSA Playback Device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_437b_alsa_playback_6'  (string)
  linux.device_file = '/dev/snd/pcmC0D6p'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D6p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_437b_alsa_capture_6'
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA ATI SB'  (string)
  alsa.device = 6  (0x6)  (int)
  alsa.device_file = '/dev/snd/pcmC0D6c'  (string)
  alsa.device_id = 'Si3054 Modem'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  alsa.pcm_class = 'modem'  (string)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  alsa.type = 'capture'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  info.product = 'Si3054 Modem ALSA Capture Device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_437b_alsa_capture_6'  (string)
  linux.device_file = '/dev/snd/pcmC0D6c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D6c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_437b_alsa_capture_2'
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA ATI SB'  (string)
  alsa.device = 2  (0x2)  (int)
  alsa.device_file = '/dev/snd/pcmC0D2c'  (string)
  alsa.device_id = 'ALC262 Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  alsa.type = 'capture'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  info.product = 'ALC262 Analog ALSA Capture Device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_437b_alsa_capture_2'  (string)
  linux.device_file = '/dev/snd/pcmC0D2c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D2c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_437b_alsa_playback_0'
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA ATI SB'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC0D0p'  (string)
  alsa.device_id = 'ALC262 Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  alsa.type = 'playback'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  info.product = 'ALC262 Analog ALSA Playback Device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_437b_alsa_playback_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0p'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D0p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_437b_alsa_capture_0'
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA ATI SB'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC0D0c'  (string)
  alsa.device_id = 'ALC262 Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  alsa.type = 'capture'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  info.product = 'ALC262 Analog ALSA Capture Device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_437b_alsa_capture_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D0c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_437b_oss_mixer__1'
  info.capabilities = {'oss'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  info.product = 'ALC262 Analog OSS Control Device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_437b_oss_mixer__1'  (string)
  linux.device_file = '/dev/mixer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/class/sound/mixer'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA ATI SB'  (string)
  oss.device_file = '/dev/mixer'  (string)
  oss.device_id = 'ALC262 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  oss.type = 'mixer'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_437b_oss_pcm_0_0'
  info.capabilities = {'oss'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  info.product = 'ALC262 Analog OSS PCM Device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_437b_oss_pcm_0_0'  (string)
  linux.device_file = '/dev/dsp'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/class/sound/dsp'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA ATI SB'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/dsp'  (string)
  oss.device_id = 'ALC262 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_437b_alsa_control__1'
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA ATI SB'  (string)
  alsa.device_file = '/dev/snd/controlC0'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  alsa.type = 'control'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  info.product = 'HDA ATI SB ALSA Control Device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_437b_alsa_control__1'  (string)
  linux.device_file = '/dev/snd/controlC0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/class/sound/controlC0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_437b_oss_pcm_0'
  info.capabilities = {'oss'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  info.product = 'ALC262 Analog OSS PCM Device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_437b_oss_pcm_0'  (string)
  linux.device_file = '/dev/audio'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/class/sound/audio'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA ATI SB'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/audio'  (string)
  oss.device_id = 'ALC262 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1002_437b'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4376'
  info.bus = 'pci'  (string)
  info.linux.driver = 'ATIIXP_IDE'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Standard Dual Channel PCI IDE Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4376'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 138  (0x8a)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1'  (string)
  pci.product = 'Standard Dual Channel PCI IDE Controller'  (string)
  pci.product_id = 17270  (0x4376)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4376_ide_1_0'
  ide.channel = 0  (0x0)  (int)
  ide.host = 1  (0x1)  (int)
  info.bus = 'ide'  (string)
  info.linux.driver = 'ide-cdrom'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4376'  (string)
  info.product = 'IDE device (master)'  (string)
  info.subsystem = 'ide'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4376_ide_1_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'ide'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/ide1/1.0'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_TSSTcorpCD/DVDW_TS_L632D'
  block.device = '/dev/hdc'  (string)
  block.is_volume = false  (bool)
  block.major = 22  (0x16)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_TSSTcorpCD/DVDW_TS_L632D'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4376_ide_1_0'  (string)
  info.product = 'TSSTcorpCD/DVDW TS-L632D'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_model_TSSTcorpCD/DVDW_TS_L632D'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/hdc'  (string)
  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'ide'  (string)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.cdr = true  (bool)
  storage.cdrom.cdrw = true  (bool)
  storage.cdrom.dvd = true  (bool)
  storage.cdrom.dvdplusr = true  (bool)
  storage.cdrom.dvdplusrdl = true  (bool)
  storage.cdrom.dvdplusrw = true  (bool)
  storage.cdrom.dvdplusrwdl = false  (bool)
  storage.cdrom.dvdr = true  (bool)
  storage.cdrom.dvdram = true  (bool)
  storage.cdrom.dvdrw = true  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.mo = false  (bool)
  storage.cdrom.mrw = true  (bool)
  storage.cdrom.mrw_w = true  (bool)
  storage.cdrom.read_speed = 11080  (0x2b48)  (int)
  storage.cdrom.support_media_changed = true  (bool)
  storage.cdrom.support_multisession = true  (bool)
  storage.cdrom.write_speed = 5540  (0x15a4)  (int)
  storage.cdrom.write_speeds = {'5540', '2770', '1385'} (string list)
  storage.drive_type = 'cdrom'  (string)
  storage.firmware_version = 'SC02'  (string)
  storage.hotpluggable = false  (bool)
  storage.media_check_enabled = true  (bool)
  storage.model = 'TSSTcorpCD/DVDW TS-L632D'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.partitioning_scheme = ''  (string)
  storage.physical_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 727040  (0xb1800)  (uint64)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = true  (bool)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_label_Personal_Data__Feb_14__2008'
  block.device = '/dev/hdc'  (string)
  block.is_volume = true  (bool)
  block.major = 22  (0x16)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_TSSTcorpCD/DVDW_TS_L632D'  (string)
  info.capabilities = {'volume.disc', 'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_model_TSSTcorpCD/DVDW_TS_L632D'  (string)
  info.product = 'Personal Data, Feb 14, 2008'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_label_Personal_Data__Feb_14__2008'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/hdc/fakevolume'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.model = ''  (string)
  volume.block_size = 2048  (0x800)  (int)
  volume.disc.capacity = 4706074624  (0x118810000)  (uint64)
  volume.disc.has_audio = false  (bool)
  volume.disc.has_data = true  (bool)
  volume.disc.is_appendable = false  (bool)
  volume.disc.is_blank = false  (bool)
  volume.disc.is_blurayvideo = false  (bool)
  volume.disc.is_rewritable = true  (bool)
  volume.disc.is_svcd = false  (bool)
  volume.disc.is_vcd = false  (bool)
  volume.disc.is_videodvd = false  (bool)
  volume.disc.type = 'dvd_rw'  (string)
  volume.fstype = 'iso9660'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = ''  (string)
  volume.ignore = false  (bool)
  volume.is_disc = true  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = true  (bool)
  volume.is_partition = false  (bool)
  volume.label = 'Personal Data, Feb 14, 2008'  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'uid=', 'mode=', 'iocharset='} (string list)
  volume.mount_point = '/media/cdrom0'  (string)
  volume.num_blocks = 1420  (0x58c)  (int)
  volume.size = 727040  (0xb1800)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4376_ide_0_0'
  ide.channel = 0  (0x0)  (int)
  ide.host = 0  (0x0)  (int)
  info.bus = 'ide'  (string)
  info.linux.driver = 'ide-disk'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4376'  (string)
  info.product = 'IDE device (master)'  (string)
  info.subsystem = 'ide'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4376_ide_0_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'ide'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/ide0/0.0'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_NT9PT6C28J6V'
  block.device = '/dev/hda'  (string)
  block.is_volume = false  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_NT9PT6C28J6V'  (string)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4376_ide_0_0'  (string)
  info.product = 'FUJITSU MHV2080AH PL'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_NT9PT6C28J6V'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/hda'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'ide'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = '004200A0'  (string)
  storage.hotpluggable = false  (bool)
  storage.media_check_enabled = false  (bool)
  storage.model = 'FUJITSU MHV2080AH PL'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.partitioning_scheme = 'mbr'  (string)
  storage.physical_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.removable = false  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 72395833344  (0x10db20c000)  (uint64)
  storage.requires_eject = false  (bool)
  storage.serial = 'NT9PT6C28J6V'  (string)
  storage.size = 72395833344  (0x10db20c000)  (uint64)
  storage.vendor = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_c5a58aaa_06e7_4382_a7d8_1e30073ce813'
  block.device = '/dev/hda6'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 6  (0x6)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_NT9PT6C28J6V'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_NT9PT6C28J6V'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_c5a58aaa_06e7_4382_a7d8_1e30073ce813'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/hda/hda6'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/home'  (string)
  volume.num_blocks = 74959164  (0x477c93c)  (int)
  volume.partition.flags = {} (string list)
  volume.partition.label = ''  (string)
  volume.partition.media_size = 72395833344  (0x10db20c000)  (uint64)
  volume.partition.number = 6  (0x6)  (int)
  volume.partition.scheme = 'embr'  (string)
  volume.partition.start = 32999887872  (0x7aef25400)  (uint64)
  volume.partition.type = '0x83'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 38379091968  (0x8ef927800)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = 'c5a58aaa-06e7-4382-a7d8-1e30073ce813'  (string)

udi = '/org/freedesktop/Hal/devices/volume_part5_size_1003484160'
  block.device = '/dev/hda5'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 5  (0x5)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_NT9PT6C28J6V'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_NT9PT6C28J6V'  (string)
  info.product = 'Volume (swap)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part5_size_1003484160'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/hda/hda5'  (string)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'swap'  (string)
  volume.fsusage = 'other'  (string)
  volume.fsversion = '2'  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 1959930  (0x1de7fa)  (int)
  volume.partition.flags = {} (string list)
  volume.partition.label = ''  (string)
  volume.partition.media_size = 72395833344  (0x10db20c000)  (uint64)
  volume.partition.number = 5  (0x5)  (int)
  volume.partition.scheme = 'embr'  (string)
  volume.partition.start = 71387205120  (0x109f024e00)  (uint64)
  volume.partition.type = '0x82'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 1003484160  (0x3bcff400)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_part3_size_1024'
  block.device = '/dev/hda3'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 3  (0x3)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_NT9PT6C28J6V'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_NT9PT6C28J6V'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part3_size_1024'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/hda/hda3'  (string)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = 'partitiontable'  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 2  (0x2)  (int)
  volume.partition.flags = {} (string list)
  volume.partition.label = ''  (string)
  volume.partition.media_size = 72395833344  (0x10db20c000)  (uint64)
  volume.partition.number = 3  (0x3)  (int)
  volume.partition.scheme = 'mbr'  (string)
  volume.partition.start = 32999823360  (0x7aef15800)  (uint64)
  volume.partition.type = '0x05'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 1024  (0x400)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_1ff5dc07_2263_4d50_b334_4e1f0378da45'
  block.device = '/dev/hda2'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 2  (0x2)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_NT9PT6C28J6V'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_NT9PT6C28J6V'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_1ff5dc07_2263_4d50_b334_4e1f0378da45'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/hda/hda2'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/'  (string)
  volume.num_blocks = 48821535  (0x2e8f51f)  (int)
  volume.partition.flags = {} (string list)
  volume.partition.label = ''  (string)
  volume.partition.media_size = 72395833344  (0x10db20c000)  (uint64)
  volume.partition.number = 2  (0x2)  (int)
  volume.partition.scheme = 'mbr'  (string)
  volume.partition.start = 8003197440  (0x1dd071a00)  (uint64)
  volume.partition.type = '0x83'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 24996625920  (0x5d1ea3e00)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '1ff5dc07-2263-4d50-b334-4e1f0378da45'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_f723c30e_42b0_4409_b805_cf1e89b50557'
  block.device = '/dev/hda1'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 1  (0x1)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_NT9PT6C28J6V'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_NT9PT6C28J6V'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_f723c30e_42b0_4409_b805_cf1e89b50557'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/hda/hda1'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/boot'  (string)
  volume.num_blocks = 15631182  (0xee834e)  (int)
  volume.partition.flags = {'boot'} (string list)
  volume.partition.label = ''  (string)
  volume.partition.media_size = 72395833344  (0x10db20c000)  (uint64)
  volume.partition.number = 1  (0x1)  (int)
  volume.partition.scheme = 'mbr'  (string)
  volume.partition.start = 32256  (0x7e00)  (uint64)
  volume.partition.type = '0x83'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 8003165184  (0x1dd069c00)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = 'f723c30e-42b0-4409-b805-cf1e89b50557'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4372'
  info.bus = 'pci'  (string)
  info.linux.driver = 'piix4_smbus'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'IXP SB400 SMBus Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4372'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 5  (0x5)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0'  (string)
  pci.product = 'IXP SB400 SMBus Controller'  (string)
  pci.product_id = 17266  (0x4372)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4373'
  info.bus = 'pci'  (string)
  info.linux.driver = 'ehci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'IXP SB400 USB2 Host Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4373'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 32  (0x20)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2'  (string)
  pci.product = 'IXP SB400 USB2 Host Controller'  (string)
  pci.product_id = 17267  (0x4373)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2'
  info.bus = 'usb_device'  (string)
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4373'  (string)
  info.product = 'EHCI Host Controller'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2'  (string)
  info.vendor = 'Linux 2.6.24-1-amd64 ehci_hcd'  (string)
  linux.device_file = '/dev/bus/usb/003/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 1  (0x1)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 8  (0x8)  (int)
  usb_device.product = 'EHCI Host Controller'  (string)
  usb_device.product_id = 0  (0x0)  (int)
  usb_device.serial = '0000:00:13.2'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.speed_bcd = 294912  (0x48000)  (int)
  usb_device.vendor = 'Linux 2.6.24-1-amd64 ehci_hcd'  (string)
  usb_device.vendor_id = 0  (0x0)  (int)
  usb_device.version = 2.0 (2) (double)
  usb_device.version_bcd = 512  (0x200)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2_usbraw'
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/003/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb_device'  (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev3.1'  (string)
  usbraw.device = '/dev/bus/usb/003/001'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2_if0'
  info.bus = 'usb'  (string)
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-0:1.0'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 8  (0x8)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 0  (0x0)  (int)
  usb.serial = '0000:00:13.2'  (string)
  usb.speed = 480.0 (480) (double)
  usb.speed_bcd = 294912  (0x48000)  (int)
  usb.vendor = 'Linux 2.6.24-1-amd64 ehci_hcd'  (string)
  usb.vendor_id = 0  (0x0)  (int)
  usb.version = 2.0 (2) (double)
  usb.version_bcd = 512  (0x200)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4375'
  info.bus = 'pci'  (string)
  info.linux.driver = 'ohci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'IXP SB400 USB Host Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4375'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1'  (string)
  pci.product = 'IXP SB400 USB Host Controller'  (string)
  pci.product_id = 17269  (0x4375)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1'
  info.bus = 'usb_device'  (string)
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4375'  (string)
  info.product = 'OHCI Host Controller'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1'  (string)
  info.vendor = 'Linux 2.6.24-1-amd64 ohci_hcd'  (string)
  linux.device_file = '/dev/bus/usb/002/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2'  (string)
  usb_device.bus_number = 2  (0x2)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 4  (0x4)  (int)
  usb_device.product = 'OHCI Host Controller'  (string)
  usb_device.product_id = 0  (0x0)  (int)
  usb_device.serial = '0000:00:13.1'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.speed_bcd = 4608  (0x1200)  (int)
  usb_device.vendor = 'Linux 2.6.24-1-amd64 ohci_hcd'  (string)
  usb_device.vendor_id = 0  (0x0)  (int)
  usb_device.version = 1.1 (1.1) (double)
  usb_device.version_bcd = 272  (0x110)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1_usbraw'
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/002/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb_device'  (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev2.1'  (string)
  usbraw.device = '/dev/bus/usb/002/001'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1_if0'
  info.bus = 'usb'  (string)
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-0:1.0'  (string)
  usb.bus_number = 2  (0x2)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 4  (0x4)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 0  (0x0)  (int)
  usb.serial = '0000:00:13.1'  (string)
  usb.speed = 12.0 (12) (double)
  usb.speed_bcd = 4608  (0x1200)  (int)
  usb.vendor = 'Linux 2.6.24-1-amd64 ohci_hcd'  (string)
  usb.vendor_id = 0  (0x0)  (int)
  usb.version = 1.1 (1.1) (double)
  usb.version_bcd = 272  (0x110)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4374'
  info.bus = 'pci'  (string)
  info.linux.driver = 'ohci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'IXP SB400 USB Host Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4374'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0'  (string)
  pci.product = 'IXP SB400 USB Host Controller'  (string)
  pci.product_id = 17268  (0x4374)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0'
  info.bus = 'usb_device'  (string)
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4374'  (string)
  info.product = 'OHCI Host Controller'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0'  (string)
  info.vendor = 'Linux 2.6.24-1-amd64 ohci_hcd'  (string)
  linux.device_file = '/dev/bus/usb/001/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 4  (0x4)  (int)
  usb_device.product = 'OHCI Host Controller'  (string)
  usb_device.product_id = 0  (0x0)  (int)
  usb_device.serial = '0000:00:13.0'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.speed_bcd = 4608  (0x1200)  (int)
  usb_device.vendor = 'Linux 2.6.24-1-amd64 ohci_hcd'  (string)
  usb_device.vendor_id = 0  (0x0)  (int)
  usb_device.version = 1.1 (1.1) (double)
  usb_device.version_bcd = 272  (0x110)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0_usbraw'
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/001/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb_device'  (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev1.1'  (string)
  usbraw.device = '/dev/bus/usb/001/001'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0_if0'
  info.bus = 'usb'  (string)
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-0:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 4  (0x4)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 0  (0x0)  (int)
  usb.serial = '0000:00:13.0'  (string)
  usb.speed = 12.0 (12) (double)
  usb.speed_bcd = 4608  (0x1200)  (int)
  usb.vendor = 'Linux 2.6.24-1-amd64 ohci_hcd'  (string)
  usb.vendor_id = 0  (0x0)  (int)
  usb.version = 1.1 (1.1) (double)
  usb.version_bcd = 272  (0x110)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_5a3f'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'RS480 PCI Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_5a3f'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'  (string)
  pci.product = 'RS480 PCI Bridge'  (string)
  pci.product_id = 23103  (0x5a3f)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_5a62'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_5a3f'  (string)
  info.product = 'RC410 [Radeon Xpress 200M]'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_5a62'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:05.0'  (string)
  pci.device_class = 3  (0x3)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:05.0'  (string)
  pci.product = 'RC410 [Radeon Xpress 200M]'  (string)
  pci.product_id = 23138  (0x5a62)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_5a31'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Unknown (0x5a31)'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_5a31'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.product_id = 23089  (0x5a31)  (int)
  pci.subsys_product_id = 49195  (0xc02b)  (int)
  pci.subsys_vendor = 'Samsung Electronics Co Ltd'  (string)
  pci.subsys_vendor_id = 5197  (0x144d)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)


Dumped 90 device(s) from the Global Device List.
------------------------------------------------