[vdr-plugin-satip] 01/01: Updated documentation

Mon Feb 16 16:53:59 UTC 2015

This is an automated email from the git hooks/post-receive script.

fnu-guest pushed a commit to branch master
in repository vdr-plugin-satip.

commit cb7755604b7f4dd9c09b3bf44cfb72b272f99b88
Author: Frank Neumann <fnu at yavdr.org>
Date:   Mon Feb 16 17:48:23 2015 +0100

    Updated documentation
    
    * Updated documentation
    * corrected spelling errors
    * cleaning up changelog
---
 debian/README.Debian     | 27 ++++++++++++++++++++++-----
 debian/changelog         | 36 ------------------------------------
 debian/copyright         |  4 ++--
 debian/plugin.satip.conf |  2 +-
 4 files changed, 25 insertions(+), 44 deletions(-)

diff --git a/debian/README.Debian b/debian/README.Debian
index 4ac962e..f4c2841 100644
--- a/debian/README.Debian
+++ b/debian/README.Debian
@@ -13,6 +13,17 @@ The plugin accepts a "devices" (-d) command-line parameter defaulting
 to one. This parameter defines how many simultaneous transponders can
 be received if there are available SAT>IP tuners.
 
+The plugin accepts also a "--server" (-s) command-line parameter, that
+can be used to manually configure static SAT>IP servers if autodetection
+via UPnP somehow can't be used. The parameter string is a semicolon
+separated list of "||" entries. The model
+consists of a DVB system (DVBS2,DVBT2,DVBT,DVBC) and number of available
+frontends separated by a hyphen:
+
+vdr -P 'satip -s ||;...'
+vdr -P 'satip -s 192.168.0.1|DVBS2-2,DVBT2-2|Octo1'
+vdr -P 'satip -s 192.168.0.1|DVBS2-4|Octo1;192.168.0.2|DVBT2-4|Octo2'
+
 Satellite positions shall be defined via sources.conf. If the source
 description begins with a number, it's used as SAT>IP signal source
 selection parameter. Otherwise, the default parameter is one:
@@ -31,13 +42,19 @@ Notes:
 - The stream id "-1" states about unsuccessful tuning. This might be a
   result of invalid channel parameters or lack of free SAT>IP tuners.
 
-- SAT>IP specification 1.2 doesn't support DVB-C/DVB-C2 receivers yet.
-
 - If the plugin doesn't detect your SAT>IP network device, make sure
   your setup doesn't have firewalled the UDP port 1900.
 
 - Stream decryption requires a separate CAM plugin that works without
-  direct access to any DVB card devices.
+  direct access to any DVB card devices. Also the integrated CAM slots
+  in Octopus Net devices are supported.
+
+- Tracing can be set on/off dynamically via command-line switch or
+  SVDRP command.
+
+- OctopusNet firmware 1.0.40 or greater recommended.
 
-- The 100% compliance against SAT>IP specification 1.2 requires a
-  patched VDR.
+- Inverto OEM firmware 1.17.0.120 or greater recommended.
+  The firmware 1.16.0.120 can be downloaded and installed
+  from their webpage: http://www.inverto.tv/support/
+  An update to a newer firmware should be offered afterwards.
diff --git a/debian/changelog b/debian/changelog
index 585d16d..fbf1d3b 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -5,36 +5,12 @@ vdr-plugin-satip (1.0.2-2) experimental; urgency=medium
 
  -- Tobias Grimm <etobi at debian.org>  Sat, 14 Feb 2015 18:24:51 +0100
 
-vdr-plugin-satip (1.0.2-1fnu1~trusty) trusty; urgency=medium
-
-  * automatic rebuild for ppa:fnu/testing-vdr-fnu
-
- -- Frank Neumann <fnu at yavdr.org>  Thu, 12 Feb 2015 01:31:08 +0100
-
 vdr-plugin-satip (1.0.2-1fnu0~trusty) trusty; urgency=high
 
   * add /etc/vdr/plugin/plugin.satip.conf for plugin parameters
 
  -- Frank Neumann <fnu at yavdr.org>  Mon, 09 Feb 2015 01:03:26 +0100
 
-vdr-plugin-satip (1.0.2-0fnu3~trusty) trusty; urgency=medium
-
-  * automatic rebuild for ppa:fnu/testing-vdr-fnu
-
- -- Frank Neumann <fnu at yavdr.org>  Sun, 08 Feb 2015 23:34:48 +0100
-
-vdr-plugin-satip (1.0.2-0fnu2~trusty) trusty; urgency=medium
-
-  * automatic rebuild for ppa:fnu/testing-vdr-fnu
-
- -- Frank Neumann <fnu at yavdr.org>  Sun, 01 Feb 2015 23:15:51 +0100
-
-vdr-plugin-satip (1.0.2-0fnu1~trusty) trusty; urgency=medium
-
-  * automatic rebuild for ppa:fnu/testing-vdr-fnu
-
- -- Frank Neumann <fnu at yavdr.org>  Fri, 30 Jan 2015 01:25:01 +0100
-
 vdr-plugin-satip (1.0.2-0fnu0~trusty) trusty; urgency=high
 
   * new upstream version 
@@ -47,12 +23,6 @@ vdr-plugin-satip (1.0.2-0fnu0~trusty) trusty; urgency=high
 
  -- Frank Neumann <fnu at yavdr.org>  Sun, 18 Jan 2015 20:11:17 +0100
 
-vdr-plugin-satip (1.0.1-0fnu1~trusty) trusty; urgency=medium
-
-  * automatic rebuild for ppa:fnu/testing-vdr-fnu
-
- -- Frank Neumann <fnu at yavdr.org>  Sun, 18 Jan 2015 14:28:46 +0100
-
 vdr-plugin-satip (1.0.1-0fnu0~trusty) trusty; urgency=high
 
   * new upstream version
@@ -124,12 +94,6 @@ vdr-plugin-satip (0.3.1-0fnu0~trusty) trusty; urgency=high
 
  -- Frank Neumann <fnu at yavdr.org>  Mon, 28 Apr 2014 17:23:34 +0200
 
-vdr-plugin-satip (0.3.0-0fnu1~trusty) trusty; urgency=high
-
-  * rebuild due to libcurl version change 7.36.0
-
- -- Frank Neumann <fnu at yavdr.org>  Tue, 22 Apr 2014 14:34:28 +0200
-
 vdr-plugin-satip (0.3.0-0fnu0~trusty) trusty; urgency=high
 
   * new upstream version
diff --git a/debian/copyright b/debian/copyright
index 156bf68..1bf198d 100644
--- a/debian/copyright
+++ b/debian/copyright
@@ -9,10 +9,10 @@ Debian Maintainers:
     Frank Neumann <fnu at yavdr.org>
 
 Copyright:
-    (C) 2014 Rolf Ahrenberg
+    (C) 2015 Rolf Ahrenberg
 
 Copyright (Debian packaging):
-    (C) 2014 Tobias Grimm, Frank Neumann
+    (C) 2015 Tobias Grimm, Frank Neumann
 
 License:
     This program is free software; you can redistribute it and/or modify
diff --git a/debian/plugin.satip.conf b/debian/plugin.satip.conf
index d9bdfd8..78aabd4 100644
--- a/debian/plugin.satip.conf
+++ b/debian/plugin.satip.conf
@@ -3,7 +3,7 @@
 #
 # For more details see:
 #   - /usr/share/doc/vdr-plugin-satip/README.gz
-#   - `vdr -Psatip --help
+#   - vdr -Psatip --help
 #
 #  -d <num>, --devices=<number>  set number of devices to be created
 #  -t <mode>, --trace=<mode>     set the tracing mode

-- 
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/pkg-vdr-dvb/vdr-plugin-satip.git

