[Pkg-virtualbox-devel] Bug#541155: virtualbox-ose-guest-x11: VT switch kills X
Sam Morris
sam at robots.org.uk
Wed Aug 12 00:12:10 UTC 2009
Package: virtualbox-ose-guest-x11
Version: 3.0.4-dfsg-1
Severity: grave
Justification: renders package unusable
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Since upgrading the guest utils to version 3.0.4, pressing Ctrl+Alt+F1 to
switch to tty1 results in a blank screen. After entering this state, it is
no longer possible to switch back to tty7 or to any other VTs.
I can still SSH in to restart X, which works fine until I switch to another
tty again...
I also tried running 'startx /usr/bin/xterm' and found that the same thing
happened when I closed the xterm, leaving the server with no clients.
Attached is the X server log.
- -- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (430, 'testing'), (420, 'unstable'), (410, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages virtualbox-ose-guest-x11 depends on:
ii libc6 2.9-23 GNU C Library: Shared libraries
ii libx11-6 2:1.2.2-1 X11 client-side library
ii libxcomposite1 1:0.4.0-4 X11 Composite extension library
ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar
ii libxmu6 2:1.0.4-1 X11 miscellaneous utility library
ii libxt6 1:1.0.5-3 X11 toolkit intrinsics library
ii pciutils 1:3.1.3-1 Linux PCI Utilities
ii virtualbox-ose-guest-utils 3.0.4-dfsg-1 x86 virtualization solution - non-
ii xserver-xorg-core 2:1.6.3-1 Xorg X server - core server
virtualbox-ose-guest-x11 recommends no packages.
virtualbox-ose-guest-x11 suggests no packages.
- -- no debconf information
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iEYEARECAAYFAkqCCNUACgkQshl/216gEHhP6gCgktTVw2WKMPH1tkdOAW+IKqNK
BRIAoJd6jiO7Bt9S6TNxwANS9LEubRfE
=c6GM
-----END PGP SIGNATURE-----
-------------- next part --------------
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.2-dsa-amd64 x86_64 Debian
Current Operating System: Linux wintermute 2.6.30-1-amd64 #1 SMP Mon Aug 3 12:28:22 UTC 2009 x86_64
Build Date: 01 August 2009 07:44:36AM
xorg-server 2:1.6.3-1 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 12 01:07:19 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Some Device"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3740
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 InnoTek Systemberatung GmbH VirtualBox Graphics Adapter rev 0, Mem @ 0xe0000000/16777216
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "vboxvideo"
(II) Loading /usr/lib/xorg/modules/drivers//vboxvideo_drv.so
(II) Module vboxvideo: vendor="Sun Microsystems, Inc."
compiled for 1.6.3, module version = 1.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(**) Load address of symbol "VBOXVIDEO" is 0x7ffa923a9660
(II) VBoxVideo: guest driver for VirtualBox: vbox
(II) Primary Device is: PCI 00 at 00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) VBoxVideo(0): VirtualBox guest additions video driver version 3.0.4_OSE
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) VBoxVideo(0): initializing int10
(II) VBoxVideo(0): Primary V_BIOS segment is: 0xc000
(II) VBoxVideo(0): VESA BIOS detected
(II) VBoxVideo(0): VESA VBE Version 2.0
(II) VBoxVideo(0): VESA VBE Total Mem: 12288 kB
(II) VBoxVideo(0): VESA VBE OEM: VirtualBox VBE BIOS http://www.virtualbox.org/
(II) VBoxVideo(0): VESA VBE OEM Software Rev: 0.2
(II) VBoxVideo(0): VESA VBE OEM Vendor: Sun Microsystems, Inc.
(II) VBoxVideo(0): VESA VBE OEM Product: VirtualBox VBE Adapter
(II) VBoxVideo(0): VESA VBE OEM Product Rev: Sun VirtualBox Version 3.0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) VBoxVideo(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
(II) VBoxVideo(0): Output VBOX1 has no monitor section
(II) VBoxVideo(0): Output VBOX1 has no monitor section
(II) VBoxVideo(0): Not using default mode "640x350" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "640x400" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "720x400" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "640x480" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "640x480" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "640x480" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "800x600" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "800x600" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "800x600" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "800x600" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1024x768" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1024x768" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1024x768" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1152x864" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1280x960" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1600x1200" (hsync out of range)
(II) VBoxVideo(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1792x1344" (hsync out of range)
(II) VBoxVideo(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1856x1392" (hsync out of range)
(II) VBoxVideo(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1920x1440" (hsync out of range)
(II) VBoxVideo(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "832x624" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1152x864" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1152x864" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1152x864" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1152x864" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1152x864" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) VBoxVideo(0): Not using default mode "1400x1050" (hsync out of range)
(II) VBoxVideo(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1680x1050" (hsync out of range)
(II) VBoxVideo(0): Not using default mode "1680x1050" (hsync out of range)
(II) VBoxVideo(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "1920x1080" (hsync out of range)
(II) VBoxVideo(0): Not using default mode "1920x1200" (hsync out of range)
(II) VBoxVideo(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "2048x1536" (hsync out of range)
(II) VBoxVideo(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) VBoxVideo(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) VBoxVideo(0): Printing probed modes for output VBOX1
(II) VBoxVideo(0): Modeline "1400x1050"x60.0 89.08 1400 1402 1404 1406 1050 1052 1054 1056 (63.4 kHz)
(II) VBoxVideo(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz)
(II) VBoxVideo(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) VBoxVideo(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) VBoxVideo(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) VBoxVideo(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) VBoxVideo(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
(II) VBoxVideo(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) VBoxVideo(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) VBoxVideo(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) VBoxVideo(0): Output VBOX1 connected
(II) VBoxVideo(0): Using exact sizes for initial modes
(II) VBoxVideo(0): Output VBOX1 using initial mode 1400x1050
(==) VBoxVideo(0): RGB weight 888
(==) VBoxVideo(0): Default visual is TrueColor
(==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
(==) VBoxVideo(0): DPI set to (96, 96)
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) VBoxVideo(0): Default visual is TrueColor
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
(II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
(II) VBoxVideo(0): [drm] added 1 reserved context for kernel
(II) VBoxVideo(0): X context handle = 0x1
(II) VBoxVideo(0): [drm] installed DRM signal handler
(II) VBoxVideo(0): visual configurations initialized
(==) VBoxVideo(0): Backing store disabled
(II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) VBoxVideo(0): DPMS enabled
(II) VBoxVideo(0): The VBox video extensions are now enabled.
(II) VBoxVideo(0): [DRI] installation complete
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
(II) The file referenced, is *NOT* loaded
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(EE) AIGLX error: vboxvideo does not export required DRI extension
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) VBoxVideo(0): Setting screen physical size to 370 x 277
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.4
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImExPS/2 Generic Explorer Mouse
(**) ImExPS/2 Generic Explorer Mouse: always reports core events
(**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event5"
(II) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
(II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Generic Explorer Mouse: (accel) set acceleration profile 0
(II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device VirtualBox Guest Service
(II) LoadModule: "vboxmouse"
(II) Loading /usr/lib/xorg/modules/input//vboxmouse_drv.so
(II) Module vboxmouse: vendor="Sun Microsystems Inc."
compiled for 0.0.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Load address of symbol "VBOXMOUSE" is 0x7ffa8fe03540
(**) VirtualBox Guest Service: always reports core events
(**) VirtualBox Guest Service: Device: "/dev/vboxadd"
(II) XINPUT: Adding extended input device "VirtualBox Guest Service" (type: MOUSE)
(**) VirtualBox Guest Service: (accel) keeping acceleration scheme 1
(**) VirtualBox Guest Service: (accel) filter chain progression: 2.00
(**) VirtualBox Guest Service: (accel) filter stage 0: 20.00 ms
(**) VirtualBox Guest Service: (accel) set acceleration profile 0
(**) VirtualBox Guest Service: Mouse Integration associated with screen 0
(II) VirtualBox Guest Service: On.
Backtrace:
More information about the Pkg-virtualbox-devel
mailing list