asterisk_1.2.4.dfsg-1_i386.changes is NEW

[Debian Installer]

(new) asterisk-bristuff_1.2.4.dfsg-1_i386.deb optional comm
Open Source Private Branch Exchange (PBX) - BRIstuff-enabled version
 Asterisk is an Open Source PBX and telephony toolkit.  It is, in a
 sense, middleware between Internet and telephony channels on the bottom,
 and Internet and telephony applications at the top.
 .
 The BRIstuff patch from www.junghanns.net enables support from certain
 hardware like HFC ISDN cards which are mainly consumer hardware.
 .
 Asterisk can be used with Voice over IP (SIP, H.323, IAX) standards, or the
 Public Switched Telephone Network (PSTN) through Supported Hardware.
 .
 Supported hardware:
 .
  * All Wildcard (tm) products from Digium (http://www.digium.com)
  * QuickNet Internet PhoneJack and LineJack (http://www.quicknet.net)
  * Full Duplex Sound Card supported by Linux
  * Adtran Atlas 800 Plus
  * ISDN4Linux compatible ISDN card
  * Tormenta Dual T1 card (http://www.bsdtelephony.com.mx)
  * CAPI compatible ISDN cards can be run using the add-on package chan-capi
 .
 This Debian package includes the sample configuration, with demonstration
 extensions, etc
 .
 Website: http://www.asterisk.org.
(new) asterisk-classic_1.2.4.dfsg-1_i386.deb optional comm
Open Source Private Branch Exchange (PBX) - original Digium version
 Asterisk is an Open Source PBX and telephony toolkit.  It is, in a
 sense, middleware between Internet and telephony channels on the bottom,
 and Internet and telephony applications at the top.
 .
 Asterisk can be used with Voice over IP (SIP, H.323, IAX) standards, or the
 Public Switched Telephone Network (PSTN) through Supported Hardware.
 .
 Supported hardware:
 .
  * All Wildcard (tm) products from Digium (http://www.digium.com)
  * QuickNet Internet PhoneJack and LineJack (http://www.quicknet.net)
  * Full Duplex Sound Card supported by Linux
  * Adtran Atlas 800 Plus
  * ISDN4Linux compatible ISDN card
  * Tormenta Dual T1 card (http://www.bsdtelephony.com.mx)
  * CAPI compatible ISDN cards can be run using the add-on package chan-capi
 .
 This Debian package includes the sample configuration, with demonstration
 extensions, etc
 .
 Website: http://www.asterisk.org.
asterisk-config_1.2.4.dfsg-1_all.deb
  to pool/main/a/asterisk/asterisk-config_1.2.4.dfsg-1_all.deb
asterisk-dev_1.2.4.dfsg-1_all.deb
  to pool/main/a/asterisk/asterisk-dev_1.2.4.dfsg-1_all.deb
asterisk-doc_1.2.4.dfsg-1_all.deb
  to pool/main/a/asterisk/asterisk-doc_1.2.4.dfsg-1_all.deb
asterisk-h323_1.2.4.dfsg-1_i386.deb
  to pool/main/a/asterisk/asterisk-h323_1.2.4.dfsg-1_i386.deb
asterisk-sounds-main_1.2.4.dfsg-1_all.deb
  to pool/main/a/asterisk/asterisk-sounds-main_1.2.4.dfsg-1_all.deb
asterisk-web-vmail_1.2.4.dfsg-1_all.deb
  to pool/main/a/asterisk/asterisk-web-vmail_1.2.4.dfsg-1_all.deb
asterisk_1.2.4.dfsg-1.diff.gz
  to pool/main/a/asterisk/asterisk_1.2.4.dfsg-1.diff.gz
asterisk_1.2.4.dfsg-1.dsc
  to pool/main/a/asterisk/asterisk_1.2.4.dfsg-1.dsc
asterisk_1.2.4.dfsg-1_all.deb
  to pool/main/a/asterisk/asterisk_1.2.4.dfsg-1_all.deb
asterisk_1.2.4.dfsg.orig.tar.gz
  to pool/main/a/asterisk/asterisk_1.2.4.dfsg.orig.tar.gz
Changes: asterisk (1:1.2.4.dfsg-1) unstable; urgency=low
 .
  [ Tzafrir Cohen ]
  * Fix PID display (Closes: #338646)
  * changes to the init.d script (Tzafrir)
  * debian/ast_config/ place here configurutaion files that will override
    the defaults from the source, though not get into the sample documentation
    dir
  * debian/ast_config/manager.conf: asterisk does listen onthe manager by
    default, but only on localhost. Other packages need not edit manager.conf
    to get a manager acount
  * bristuff 0.3.0-PRE-1f
  * option_detach.dpatch: Adds option -D: always daemonize (even with -v,-d)
    (conflicts with bristuff, though)
  * ukcid.dpatch: UK Caller ID patch for the X100P. (Closes: #302380)
 .
  [ Kilian Krause ]
  * New upstream release. (Closes: #350905)
  * Bumping depends on libpri and zaptel to according 1.2 versions.
  * Build-Depends on libpri1.2 since new ABI caused new package name.
  * Removed alternatives from Build-Depends since sbuild will only take first
    anyway to ensure constant rebuilds.
  * Add a noload for chan_capi by default, so that we d not stop loading when
    no CAPI is installed. (Closes: #328835)
  * Include smsq by adding Build-Depends on libpopt-dev (Closes: #348090)
Announcing to debian-devel-changes at lists.debian.org
Closing bugs: 302380 328835 338646 348090 350905 


Your package contains new components which requires manual editing of
the override file.  It is ok otherwise, so please be patient.  New
packages are usually added to the override file about once a week.

You may have gotten the distribution wrong.  You'll get warnings above
if files already exist in other distributions.