[Pkg-vsquare-changes] r258 - in vde2/tags: . 2.3.1-1/debian
Filippo Giunchedi
filippo at alioth.debian.org
Sun Sep 5 15:44:00 UTC 2010
Author: filippo
Date: 2010-09-05 15:43:52 +0000 (Sun, 05 Sep 2010)
New Revision: 258
Added:
vde2/tags/2.3.1-1/
vde2/tags/2.3.1-1/debian/changelog
vde2/tags/2.3.1-1/debian/control
vde2/tags/2.3.1-1/debian/rules
Removed:
vde2/tags/2.3.1-1/debian/changelog
vde2/tags/2.3.1-1/debian/control
vde2/tags/2.3.1-1/debian/rules
Log:
[svn-buildpackage] Tagging vde2 2.3.1-1
Deleted: vde2/tags/2.3.1-1/debian/changelog
===================================================================
--- vde2/trunk/debian/changelog 2010-07-03 18:52:04 UTC (rev 251)
+++ vde2/tags/2.3.1-1/debian/changelog 2010-09-05 15:43:52 UTC (rev 258)
@@ -1,163 +0,0 @@
-vde2 (2.3-1) unstable; urgency=low
-
- * New upstream version
- - bump libvdeplug soname
- - ship updated version of slirp (Closes: #460734)
- * Remove debian/patches/dont_use_installpath, use ./configure --sysconfdir
- and --localstate dir instead
- * Drop soname from libvdeplug3-dev, easier for package build-depending on
- the library
- * Fix "Timing issue in /etc/network/if-pre-up.d/vde2" by calling vde_tunctl
- in ifupdown hooks (Closes: #568363)
-
- -- Filippo Giunchedi <filippo at debian.org> Sat, 03 Jul 2010 18:29:27 +0100
-
-vde2 (2.2.3-3) unstable; urgency=low
-
- * Add "vde2." prefix to configuration files for vde2 package.
- * Move "usr/etc" in "etc" after make install as a workaround for bad usage
- of INSTALLPATH.
- * Install config files for vdecmd and libvdemgmt.
- * Install pkg-config files.
- * Install vde_tunctl (Closes: #545266).
-
- -- Luca Bigliardi <shammash at artha.org> Sun, 06 Sep 2009 16:18:26 +0100
-
-vde2 (2.2.3-2) unstable; urgency=low
-
- * Change Ludovico Gardenghi's e-mail address.
- * Add missing Conflicts/Replaces for libvde0 vs libvdemgmt0 (and -dev).
-
- -- Ludovico Gardenghi <garden at debian.org> Mon, 31 Aug 2009 12:02:03 +0200
-
-vde2 (2.2.3-1) unstable; urgency=low
-
- [ Luca Bigliardi ]
- * Change Luca Bigliardi's e-mail address.
-
- [ Filippo Giunchedi ]
- * New upstream version, remove patches merged upstream:
- - remove_numports_limit.patch
- - fix_loop_noarg.patch
- - fix_output_cosmetic.patch
- - plugin_fixes.patch
- - dbgout_prototype_change.patch
- - allow_mgmtgroup.patch
- - vde_kvdeswitchfix.patch
- * Rename libvdemgmt in libvde and ship mgmt, snmp and hist there
- * Remove transitional vde package
- * Update to S-V 3.8.3, no changes needed
- * Point copyright files to GPL-2
-
- -- Filippo Giunchedi <filippo at debian.org> Sun, 30 Aug 2009 22:06:53 +0100
-
-vde2 (2.2.2-3) unstable; urgency=low
-
- [ Ludovico Gardenghi ]
- * Fix wrong postinst check for /sbin/MAKEDEV. (Closes: #502708)
-
- [ Filippo Giunchedi ]
- * Add debian/patches/dont_use_installpath.patch to ignore INSTALLPATH for
- now (Closes: #502442)
- * Install doc/vdecmd in examples
-
- -- Ludovico Gardenghi <garden at acheronte.it> Wed, 22 Oct 2008 00:23:48 +0200
-
-vde2 (2.2.2-2) unstable; urgency=low
-
- * Add DM-Upload-Allowed field
- * Add Luca Bigliardi as Uploader/DM
- * Backport fixes from upstream 2.2.3 into debian/patches:
- - allow_mgmtgroup.patch:
- add options for group permission on sockets (Closes: #487434)
- fix a segfault in handle_input with commandline scripts
- - dbgout_prototype_change.patch:
- change debug function prototype to include port number
- - fix_loop_noarg.patch:
- fix an infinite loop in vdeq when provided wrong arguments
- - fix_output_cosmetic.patch:
- fix usage output in wirefilter
- - plugin_fixes.patch:
- various fixes in pdump and dump plugins
- - remove_numports_limit.patch:
- remove the 255 ports limit in vde_plug and vde_plug2tap
- fix a segfault while resizing the switch
- - vde_kvdeswitchfix.patch:
- fixes for kvde_switch
-
- -- Filippo Giunchedi <filippo at debian.org> Wed, 01 Oct 2008 14:00:40 +0200
-
-vde2 (2.2.2-1) unstable; urgency=low
-
- [ Filippo Giunchedi ]
- * Remove vde_tunctl manpage and install all manpages instead
-
- [ Ludovico Gardenghi ]
- * New upstream release
-
- -- Ludovico Gardenghi <garden at acheronte.it> Tue, 08 Jul 2008 16:43:49 +0200
-
-vde2 (2.2.1-1) unstable; urgency=low
-
- * New upstream release
- - fix vlan commands on amd64 (Closes: #484295)
- - fix mac addresses switch between ports (Closes: #469098)
- * Suggest: qemu and kvm as requested in #461514
- * Expand and spell-check README.Debian, add manual method example
- (Closes: #466363)
- * Do not assume MAKEDEV presence in postinst
- * Remove /usr/bin/daemon usage from ifupdown scripts (and Recommends)
- * Add manpage for vde_tunctl
- * Upgrade to S-V 3.8.0 (add Homepage field)
-
- -- Filippo Giunchedi <filippo at debian.org> Tue, 17 Jun 2008 15:36:32 +0200
-
-vde2 (2.2.0-pre2-1) unstable; urgency=low
-
- * New upstream version
- * Add libvdemgmt packages
-
- -- Filippo Giunchedi <filippo at debian.org> Thu, 31 Jan 2008 00:39:44 +0100
-
-vde2 (2.1.6+r154-1) unstable; urgency=low
-
- * snapshot release from svn to bring some new upstream features and debian
- improvements
-
- [ Ludovico Gardenghi ]
- * Fixed a typo in /etc/network/if-pre-up.d/vde2 script (thanks to Scott
- Shedden) (Closes: #411400)
-
- [ Filippo Giunchedi ]
- * do not check on interface's name being tap*, ignore interface if there are
- no actual vde2-* parameters, thanks Raphael (Closes: #418065)
- * fix README.Debian mispelled vde-net group (Closes: #419513)
- * document ifupdown "manual" method usage in README.Debian and fix
- if-pre-up.d/vde2
-
- -- Filippo Giunchedi <filippo at debian.org> Fri, 04 May 2007 19:32:22 +0200
-
-vde2 (2.1.6-1) unstable; urgency=low
-
- [ Ludovico Gardenghi ]
- * New upstream release
- - Piotr's Debian patches merged in upstream
- - Fixed typos in wirefilter man page (Closes: #403324)
- - Added function prototypes in vde_cryptcab (Closes: #403292)
- * Imported Piotr's work:
- - Added a vde transitional package to facilitate upgrades
- - Improved descriptions
- - Added network/if-post-down.d network/if-pre-up.d scripts
-
- [ Guido Trotter ]
- * Added Piotr as an uploader
- * Add debhelper tokens to post{inst,rm}
-
- -- Guido Trotter <ultrotter at debian.org> Wed, 20 Dec 2006 13:04:58 +0000
-
-vde2 (2.1.4-1) unstable; urgency=low
-
- * Initial release
-
- -- Guido Trotter <ultrotter at debian.org> Tue, 5 Dec 2006 10:57:11 +0200
-
Copied: vde2/tags/2.3.1-1/debian/changelog (from rev 256, vde2/trunk/debian/changelog)
===================================================================
--- vde2/tags/2.3.1-1/debian/changelog (rev 0)
+++ vde2/tags/2.3.1-1/debian/changelog 2010-09-05 15:43:52 UTC (rev 258)
@@ -0,0 +1,164 @@
+vde2 (2.3.1-1) experimental; urgency=low
+
+ * New upstream version
+ - bump libvdeplug soname
+ - ship updated version of slirp (Closes: #460734, #572261)
+ * Remove debian/patches/dont_use_installpath, use ./configure --sysconfdir
+ and --localstate dir instead
+ * Drop soname from libvdeplug3-dev, easier for package build-depending on
+ the library
+ * Fix "Timing issue in /etc/network/if-pre-up.d/vde2" by calling vde_tunctl
+ in ifupdown hooks (Closes: #568363)
+ * Update standards-version to 3.9.1: stop shipping .la files
+
+ -- Filippo Giunchedi <filippo at debian.org> Sun, 05 Sep 2010 16:20:43 +0100
+
+vde2 (2.2.3-3) unstable; urgency=low
+
+ * Add "vde2." prefix to configuration files for vde2 package.
+ * Move "usr/etc" in "etc" after make install as a workaround for bad usage
+ of INSTALLPATH.
+ * Install config files for vdecmd and libvdemgmt.
+ * Install pkg-config files.
+ * Install vde_tunctl (Closes: #545266).
+
+ -- Luca Bigliardi <shammash at artha.org> Sun, 06 Sep 2009 16:18:26 +0100
+
+vde2 (2.2.3-2) unstable; urgency=low
+
+ * Change Ludovico Gardenghi's e-mail address.
+ * Add missing Conflicts/Replaces for libvde0 vs libvdemgmt0 (and -dev).
+
+ -- Ludovico Gardenghi <garden at debian.org> Mon, 31 Aug 2009 12:02:03 +0200
+
+vde2 (2.2.3-1) unstable; urgency=low
+
+ [ Luca Bigliardi ]
+ * Change Luca Bigliardi's e-mail address.
+
+ [ Filippo Giunchedi ]
+ * New upstream version, remove patches merged upstream:
+ - remove_numports_limit.patch
+ - fix_loop_noarg.patch
+ - fix_output_cosmetic.patch
+ - plugin_fixes.patch
+ - dbgout_prototype_change.patch
+ - allow_mgmtgroup.patch
+ - vde_kvdeswitchfix.patch
+ * Rename libvdemgmt in libvde and ship mgmt, snmp and hist there
+ * Remove transitional vde package
+ * Update to S-V 3.8.3, no changes needed
+ * Point copyright files to GPL-2
+
+ -- Filippo Giunchedi <filippo at debian.org> Sun, 30 Aug 2009 22:06:53 +0100
+
+vde2 (2.2.2-3) unstable; urgency=low
+
+ [ Ludovico Gardenghi ]
+ * Fix wrong postinst check for /sbin/MAKEDEV. (Closes: #502708)
+
+ [ Filippo Giunchedi ]
+ * Add debian/patches/dont_use_installpath.patch to ignore INSTALLPATH for
+ now (Closes: #502442)
+ * Install doc/vdecmd in examples
+
+ -- Ludovico Gardenghi <garden at acheronte.it> Wed, 22 Oct 2008 00:23:48 +0200
+
+vde2 (2.2.2-2) unstable; urgency=low
+
+ * Add DM-Upload-Allowed field
+ * Add Luca Bigliardi as Uploader/DM
+ * Backport fixes from upstream 2.2.3 into debian/patches:
+ - allow_mgmtgroup.patch:
+ add options for group permission on sockets (Closes: #487434)
+ fix a segfault in handle_input with commandline scripts
+ - dbgout_prototype_change.patch:
+ change debug function prototype to include port number
+ - fix_loop_noarg.patch:
+ fix an infinite loop in vdeq when provided wrong arguments
+ - fix_output_cosmetic.patch:
+ fix usage output in wirefilter
+ - plugin_fixes.patch:
+ various fixes in pdump and dump plugins
+ - remove_numports_limit.patch:
+ remove the 255 ports limit in vde_plug and vde_plug2tap
+ fix a segfault while resizing the switch
+ - vde_kvdeswitchfix.patch:
+ fixes for kvde_switch
+
+ -- Filippo Giunchedi <filippo at debian.org> Wed, 01 Oct 2008 14:00:40 +0200
+
+vde2 (2.2.2-1) unstable; urgency=low
+
+ [ Filippo Giunchedi ]
+ * Remove vde_tunctl manpage and install all manpages instead
+
+ [ Ludovico Gardenghi ]
+ * New upstream release
+
+ -- Ludovico Gardenghi <garden at acheronte.it> Tue, 08 Jul 2008 16:43:49 +0200
+
+vde2 (2.2.1-1) unstable; urgency=low
+
+ * New upstream release
+ - fix vlan commands on amd64 (Closes: #484295)
+ - fix mac addresses switch between ports (Closes: #469098)
+ * Suggest: qemu and kvm as requested in #461514
+ * Expand and spell-check README.Debian, add manual method example
+ (Closes: #466363)
+ * Do not assume MAKEDEV presence in postinst
+ * Remove /usr/bin/daemon usage from ifupdown scripts (and Recommends)
+ * Add manpage for vde_tunctl
+ * Upgrade to S-V 3.8.0 (add Homepage field)
+
+ -- Filippo Giunchedi <filippo at debian.org> Tue, 17 Jun 2008 15:36:32 +0200
+
+vde2 (2.2.0-pre2-1) unstable; urgency=low
+
+ * New upstream version
+ * Add libvdemgmt packages
+
+ -- Filippo Giunchedi <filippo at debian.org> Thu, 31 Jan 2008 00:39:44 +0100
+
+vde2 (2.1.6+r154-1) unstable; urgency=low
+
+ * snapshot release from svn to bring some new upstream features and debian
+ improvements
+
+ [ Ludovico Gardenghi ]
+ * Fixed a typo in /etc/network/if-pre-up.d/vde2 script (thanks to Scott
+ Shedden) (Closes: #411400)
+
+ [ Filippo Giunchedi ]
+ * do not check on interface's name being tap*, ignore interface if there are
+ no actual vde2-* parameters, thanks Raphael (Closes: #418065)
+ * fix README.Debian mispelled vde-net group (Closes: #419513)
+ * document ifupdown "manual" method usage in README.Debian and fix
+ if-pre-up.d/vde2
+
+ -- Filippo Giunchedi <filippo at debian.org> Fri, 04 May 2007 19:32:22 +0200
+
+vde2 (2.1.6-1) unstable; urgency=low
+
+ [ Ludovico Gardenghi ]
+ * New upstream release
+ - Piotr's Debian patches merged in upstream
+ - Fixed typos in wirefilter man page (Closes: #403324)
+ - Added function prototypes in vde_cryptcab (Closes: #403292)
+ * Imported Piotr's work:
+ - Added a vde transitional package to facilitate upgrades
+ - Improved descriptions
+ - Added network/if-post-down.d network/if-pre-up.d scripts
+
+ [ Guido Trotter ]
+ * Added Piotr as an uploader
+ * Add debhelper tokens to post{inst,rm}
+
+ -- Guido Trotter <ultrotter at debian.org> Wed, 20 Dec 2006 13:04:58 +0000
+
+vde2 (2.1.4-1) unstable; urgency=low
+
+ * Initial release
+
+ -- Guido Trotter <ultrotter at debian.org> Tue, 5 Dec 2006 10:57:11 +0200
+
Deleted: vde2/tags/2.3.1-1/debian/control
===================================================================
--- vde2/trunk/debian/control 2010-07-03 18:52:04 UTC (rev 251)
+++ vde2/tags/2.3.1-1/debian/control 2010-09-05 15:43:52 UTC (rev 258)
@@ -1,125 +0,0 @@
-Source: vde2
-Section: net
-Priority: optional
-Maintainer: Debian VSquare Team <pkg-vsquare-devel at lists.alioth.debian.org>
-Uploaders: Ludovico Gardenghi <garden at debian.org>, Guido Trotter <ultrotter at debian.org>, Piotr Roszatycki <dexter at debian.org>, Filippo Giunchedi <filippo at debian.org>, Luca Bigliardi <shammash at artha.org>
-DM-Upload-Allowed: yes
-Build-Depends: debhelper (>= 6.0.7~), libssl-dev, libpcap-dev
-Vcs-Svn: svn://svn.debian.org/pkg-vsquare/vde2/trunk
-Vcs-Browser: http://svn.debian.org/wsvn/pkg-vsquare/vde2/trunk/
-Homepage: http://vde.sourceforge.net
-Standards-Version: 3.8.4
-
-Package: vde2
-Section: net
-Architecture: any
-Depends: adduser, ${shlibs:Depends}, ${misc:Depends}
-Suggests: vde2-cryptcab, libpcap0.8, kvm, qemu
-Replaces: vde
-Description: Virtual Distributed Ethernet
- VDE is a virtual switch that can connect multiple virtual machines together,
- both local and remote.
- .
- Components of the VDE architecture are VDE switches (virtual counterpart of
- ethernet switches) and VDE cables (virtual counterpart of a crossed-cable used
- to connect two switches).
- .
- VDE 2 includes:
- - switch management both from console and from a "unix socket terminal"
- - VLAN 801.1q
- - FSTP (fast spanning tree)
- - distributed cable manager using a blowfish encrypted channel
- - wire packet filter to emulate delays and packet loss on virtual wires
- .
- Examples of VDE uses:
- - With VDE it is possible to create a virtual network of QEMU machines
- running on several real computer
- - VDE can be used to create tunnels (even crossing masqueraded networks)
- - VDE can provide mobility support
- .
- The VDE also provides bi-directional pipe command (dpipe) and remote terminal
- for unix sockets (unixterm).
- .
- The Debian package provides a nice extension for /etc/network/interfaces file
- for easy set up.
-
-Package: vde2-cryptcab
-Section: net
-Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Description: Virtual Distributed Ethernet - CryptCab
- VDE is a virtual switch that can connect multiple virtual machines together,
- both local and remote.
- .
- Components of the VDE architecture are VDE switches (virtual counterpart of
- ethernet switches) and VDE cables (virtual counterpart of a crossed-cable used
- to connect two switches).
- .
- This package contains CryptCab, which can be used to send encrypted data
- over an UDP link.
-
-Package: libvdeplug-dev
-Section: libdevel
-Architecture: any
-Replaces: libvdeplug2-dev
-Conflicts: libvdeplug2-dev
-Depends: libvdeplug3 (= ${binary:Version}), ${misc:Depends}
-Description: Virtual Distributed Ethernet - Plug development files
- VDE is a virtual switch that can connect multiple virtual machines together,
- both local and remote.
- .
- Components of the VDE architecture are VDE switches (virtual counterpart of
- ethernet switches) and VDE cables (virtual counterpart of a crossed-cable used
- to connect two switches).
- .
- This package contains the development files for libvdeplug.
-
-Package: libvdeplug3
-Section: libs
-Architecture: any
-Replaces: libvdeplug2
-Conflicts: libvdeplug2
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Description: Virtual Distributed Ethernet - Plug library
- VDE is a virtual switch that can connect multiple virtual machines together,
- both local and remote.
- .
- Components of the VDE architecture are VDE switches (virtual counterpart of
- ethernet switches) and VDE cables (virtual counterpart of a crossed-cable used
- to connect two switches).
- .
- This package contains a library that makes programs able to connect to a local
- VDE switch. The simplest one is vde_plug, contained in the vde2 package.
-
-Package: libvde-dev
-Section: libdevel
-Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Conflicts: libvdemgmt0-dev (<= 2.2.2-3)
-Replaces: libvdemgmt0-dev
-Description: Virtual Distributed Ethernet - support libraries development files
- VDE is a virtual switch that can connect multiple virtual machines together,
- both local and remote.
- .
- Components of the VDE architecture are VDE switches (virtual counterpart of
- ethernet switches) and VDE cables (virtual counterpart of a crossed-cable used
- to connect two switches).
- .
- This package contains the development files for libvde
-
-Package: libvde0
-Section: libs
-Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Conflicts: libvdemgmt0 (<= 2.2.2-3)
-Replaces: libvdemgmt0
-Description: Virtual Distributed Ethernet - support libraries
- VDE is a virtual switch that can connect multiple virtual machines together,
- both local and remote.
- .
- Components of the VDE architecture are VDE switches (virtual counterpart of
- ethernet switches) and VDE cables (virtual counterpart of a crossed-cable used
- to connect two switches).
- .
- This package contains a library to interact with vde_switch management console
- using pre-made unattended scripts.
Copied: vde2/tags/2.3.1-1/debian/control (from rev 254, vde2/trunk/debian/control)
===================================================================
--- vde2/tags/2.3.1-1/debian/control (rev 0)
+++ vde2/tags/2.3.1-1/debian/control 2010-09-05 15:43:52 UTC (rev 258)
@@ -0,0 +1,125 @@
+Source: vde2
+Section: net
+Priority: optional
+Maintainer: Debian VSquare Team <pkg-vsquare-devel at lists.alioth.debian.org>
+Uploaders: Ludovico Gardenghi <garden at debian.org>, Guido Trotter <ultrotter at debian.org>, Piotr Roszatycki <dexter at debian.org>, Filippo Giunchedi <filippo at debian.org>, Luca Bigliardi <shammash at artha.org>
+DM-Upload-Allowed: yes
+Build-Depends: debhelper (>= 6.0.7~), libssl-dev, libpcap-dev
+Vcs-Svn: svn://svn.debian.org/pkg-vsquare/vde2/trunk
+Vcs-Browser: http://svn.debian.org/wsvn/pkg-vsquare/vde2/trunk/
+Homepage: http://vde.sourceforge.net
+Standards-Version: 3.9.1
+
+Package: vde2
+Section: net
+Architecture: any
+Depends: adduser, ${shlibs:Depends}, ${misc:Depends}
+Suggests: vde2-cryptcab, libpcap0.8, kvm, qemu
+Replaces: vde
+Description: Virtual Distributed Ethernet
+ VDE is a virtual switch that can connect multiple virtual machines together,
+ both local and remote.
+ .
+ Components of the VDE architecture are VDE switches (virtual counterpart of
+ ethernet switches) and VDE cables (virtual counterpart of a crossed-cable used
+ to connect two switches).
+ .
+ VDE 2 includes:
+ - switch management both from console and from a "unix socket terminal"
+ - VLAN 801.1q
+ - FSTP (fast spanning tree)
+ - distributed cable manager using a blowfish encrypted channel
+ - wire packet filter to emulate delays and packet loss on virtual wires
+ .
+ Examples of VDE uses:
+ - With VDE it is possible to create a virtual network of QEMU machines
+ running on several real computer
+ - VDE can be used to create tunnels (even crossing masqueraded networks)
+ - VDE can provide mobility support
+ .
+ The VDE also provides bi-directional pipe command (dpipe) and remote terminal
+ for unix sockets (unixterm).
+ .
+ The Debian package provides a nice extension for /etc/network/interfaces file
+ for easy set up.
+
+Package: vde2-cryptcab
+Section: net
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Virtual Distributed Ethernet - CryptCab
+ VDE is a virtual switch that can connect multiple virtual machines together,
+ both local and remote.
+ .
+ Components of the VDE architecture are VDE switches (virtual counterpart of
+ ethernet switches) and VDE cables (virtual counterpart of a crossed-cable used
+ to connect two switches).
+ .
+ This package contains CryptCab, which can be used to send encrypted data
+ over an UDP link.
+
+Package: libvdeplug-dev
+Section: libdevel
+Architecture: any
+Replaces: libvdeplug2-dev
+Conflicts: libvdeplug2-dev
+Depends: libvdeplug3 (= ${binary:Version}), ${misc:Depends}
+Description: Virtual Distributed Ethernet - Plug development files
+ VDE is a virtual switch that can connect multiple virtual machines together,
+ both local and remote.
+ .
+ Components of the VDE architecture are VDE switches (virtual counterpart of
+ ethernet switches) and VDE cables (virtual counterpart of a crossed-cable used
+ to connect two switches).
+ .
+ This package contains the development files for libvdeplug.
+
+Package: libvdeplug3
+Section: libs
+Architecture: any
+Replaces: libvdeplug2
+Conflicts: libvdeplug2
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Virtual Distributed Ethernet - Plug library
+ VDE is a virtual switch that can connect multiple virtual machines together,
+ both local and remote.
+ .
+ Components of the VDE architecture are VDE switches (virtual counterpart of
+ ethernet switches) and VDE cables (virtual counterpart of a crossed-cable used
+ to connect two switches).
+ .
+ This package contains a library that makes programs able to connect to a local
+ VDE switch. The simplest one is vde_plug, contained in the vde2 package.
+
+Package: libvde-dev
+Section: libdevel
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Conflicts: libvdemgmt0-dev (<= 2.2.2-3)
+Replaces: libvdemgmt0-dev
+Description: Virtual Distributed Ethernet - support libraries development files
+ VDE is a virtual switch that can connect multiple virtual machines together,
+ both local and remote.
+ .
+ Components of the VDE architecture are VDE switches (virtual counterpart of
+ ethernet switches) and VDE cables (virtual counterpart of a crossed-cable used
+ to connect two switches).
+ .
+ This package contains the development files for libvde
+
+Package: libvde0
+Section: libs
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Conflicts: libvdemgmt0 (<= 2.2.2-3)
+Replaces: libvdemgmt0
+Description: Virtual Distributed Ethernet - support libraries
+ VDE is a virtual switch that can connect multiple virtual machines together,
+ both local and remote.
+ .
+ Components of the VDE architecture are VDE switches (virtual counterpart of
+ ethernet switches) and VDE cables (virtual counterpart of a crossed-cable used
+ to connect two switches).
+ .
+ This package contains a library to interact with vde_switch management console
+ using pre-made unattended scripts.
Deleted: vde2/tags/2.3.1-1/debian/rules
===================================================================
--- vde2/trunk/debian/rules 2010-07-03 18:52:04 UTC (rev 251)
+++ vde2/tags/2.3.1-1/debian/rules 2010-09-05 15:43:52 UTC (rev 258)
@@ -1,137 +0,0 @@
-#!/usr/bin/make -f
-# -*- makefile -*-
-# Sample debian/rules that uses debhelper.
-# This file was originally written by Joey Hess and Craig Small.
-# As a special exception, when this file is copied by dh-make into a
-# dh-make output file, you may use that output file without restriction.
-# This special exception was added by Craig Small in version 0.37 of dh-make.
-
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
-
-
-# These are used for cross-compiling and for saving the configure script
-# from having to guess our platform (since we know it already)
-DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-
-
-CFLAGS = -Wall -g
-
-ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
- CFLAGS += -O0
-else
- CFLAGS += -O2
-endif
-
-# Apply patches to the package
-patch: patch-stamp
-patch-stamp:
- dh_testdir
- @patches=debian/patches/*.patch; for patch in $$patches; do \
- test -f $$patch || continue; \
- echo "Applying $$patch"; \
- patch -stuN -p1 < $$patch || exit 1; \
- done
- touch $@
-
-# Remove patches from the package
-unpatch:
- dh_testdir
- @if test -f patch-stamp; then \
- patches=debian/patches/*.patch; \
- for patch in $$patches; do \
- reversepatches="$$patch $$reversepatches"; \
- done; \
- for patch in $$reversepatches; do \
- test -f $$patch || continue; \
- echo "Reversing $$patch"; \
- patch -suRf -p1 < $$patch || exit 1; \
- done; \
- rm -f patch-stamp; \
- fi
-
-config.status: configure
- dh_testdir
- # Add here commands to configure the package.
- ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) \
- --prefix=/usr \
- --libexecdir=\$${prefix}/lib/vde2 \
- --mandir=\$${prefix}/share/man \
- --infodir=\$${prefix}/share/info \
- --localstatedir=/var \
- --sysconfdir=/etc \
- --enable-experimental \
- CFLAGS="$(CFLAGS)"
-
-
-build: patch build-stamp
-build-stamp: config.status
- dh_testdir
-
- # Add here commands to compile the package.
- $(MAKE)
-
- touch $@
-
-clean: unpatch
- dh_testdir
- dh_testroot
- rm -f build-stamp
-
- # Add here commands to clean up after the build process.
- [ ! -f Makefile ] || $(MAKE) distclean || true
-
-ifneq "$(wildcard /usr/share/misc/config.sub)" ""
- cp -f /usr/share/misc/config.sub config.sub
-endif
-ifneq "$(wildcard /usr/share/misc/config.guess)" ""
- cp -f /usr/share/misc/config.guess config.guess
-endif
-
-
- dh_clean
-
-install: build
- dh_testdir
- dh_testroot
- dh_clean -k
- dh_installdirs
-
- $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp
-
-
-# Build architecture-independent files here.
-binary-indep: build install
-# We have nothing to do by default.
-
-# Build architecture-dependent files here.
-binary-arch: build install
- dh_testdir
- dh_testroot
- dh_installchangelogs
- dh_installdocs
- dh_installexamples
- dh_install --sourcedir=debian/tmp
- cat $(CURDIR)/debian/vde2-cryptcab.install | while read file; do rm -f $(CURDIR)/debian/vde2/$$file; done
- rm $(CURDIR)/debian/vde2/usr/lib/vde2/plugins/*.la
- rm $(CURDIR)/debian/vde2/usr/lib/vde2/vde_l3/*.la
- rm $(CURDIR)/debian/vde2/usr/lib/vde2/libvdetap.la
- rm -f $(CURDIR)/debian/vde2/usr/bin/kvde_switch
- dh_installman
- dh_lintian
- dh_link
- dh_strip
- dh_compress
- install -D -m 0755 debian/network/if-pre-up.d/vde2 debian/vde2/etc/network/if-pre-up.d/vde2
- install -D -m 0755 debian/network/if-post-down.d/vde2 debian/vde2/etc/network/if-post-down.d/vde2
- dh_fixperms
- dh_makeshlibs
- dh_installdeb
- dh_shlibdeps -L libvdeplug3 -l debian/libvdeplug3/usr/bin
- dh_gencontrol
- dh_md5sums
- dh_builddeb -- -D
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install
Copied: vde2/tags/2.3.1-1/debian/rules (from rev 254, vde2/trunk/debian/rules)
===================================================================
--- vde2/tags/2.3.1-1/debian/rules (rev 0)
+++ vde2/tags/2.3.1-1/debian/rules 2010-09-05 15:43:52 UTC (rev 258)
@@ -0,0 +1,141 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+
+# These are used for cross-compiling and for saving the configure script
+# from having to guess our platform (since we know it already)
+DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+
+
+CFLAGS = -Wall -g
+
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+ CFLAGS += -O0
+else
+ CFLAGS += -O2
+endif
+
+# Apply patches to the package
+patch: patch-stamp
+patch-stamp:
+ dh_testdir
+ @patches=debian/patches/*.patch; for patch in $$patches; do \
+ test -f $$patch || continue; \
+ echo "Applying $$patch"; \
+ patch -stuN -p1 < $$patch || exit 1; \
+ done
+ touch $@
+
+# Remove patches from the package
+unpatch:
+ dh_testdir
+ @if test -f patch-stamp; then \
+ patches=debian/patches/*.patch; \
+ for patch in $$patches; do \
+ reversepatches="$$patch $$reversepatches"; \
+ done; \
+ for patch in $$reversepatches; do \
+ test -f $$patch || continue; \
+ echo "Reversing $$patch"; \
+ patch -suRf -p1 < $$patch || exit 1; \
+ done; \
+ rm -f patch-stamp; \
+ fi
+
+config.status: configure
+ dh_testdir
+ # Add here commands to configure the package.
+ ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) \
+ --prefix=/usr \
+ --libexecdir=\$${prefix}/lib/vde2 \
+ --mandir=\$${prefix}/share/man \
+ --infodir=\$${prefix}/share/info \
+ --localstatedir=/var \
+ --sysconfdir=/etc \
+ --enable-experimental \
+ CFLAGS="$(CFLAGS)"
+
+
+build: patch build-stamp
+build-stamp: config.status
+ dh_testdir
+
+ # Add here commands to compile the package.
+ $(MAKE)
+
+ touch $@
+
+clean: unpatch
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp
+
+ # Add here commands to clean up after the build process.
+ [ ! -f Makefile ] || $(MAKE) distclean || true
+
+ifneq "$(wildcard /usr/share/misc/config.sub)" ""
+ cp -f /usr/share/misc/config.sub config.sub
+endif
+ifneq "$(wildcard /usr/share/misc/config.guess)" ""
+ cp -f /usr/share/misc/config.guess config.guess
+endif
+
+
+ dh_clean
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp
+
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build install
+ dh_testdir
+ dh_testroot
+ dh_installchangelogs
+ dh_installdocs
+ dh_installexamples
+ dh_install --sourcedir=debian/tmp
+ cat $(CURDIR)/debian/vde2-cryptcab.install | while read file; do rm -f $(CURDIR)/debian/vde2/$$file; done
+ rm $(CURDIR)/debian/vde2/usr/lib/vde2/plugins/*.la
+ rm $(CURDIR)/debian/vde2/usr/lib/vde2/vde_l3/*.la
+ rm $(CURDIR)/debian/vde2/usr/lib/vde2/libvdetap.la
+ rm $(CURDIR)/debian/libvde-dev/usr/lib/libvdemgmt.la
+ rm $(CURDIR)/debian/libvde-dev/usr/lib/libvdehist.la
+ rm $(CURDIR)/debian/libvde-dev/usr/lib/libvdesnmp.la
+ rm $(CURDIR)/debian/libvdeplug-dev/usr/lib/libvdeplug.la
+ rm -f $(CURDIR)/debian/vde2/usr/bin/kvde_switch
+ dh_installman
+ dh_lintian
+ dh_link
+ dh_strip
+ dh_compress
+ install -D -m 0755 debian/network/if-pre-up.d/vde2 debian/vde2/etc/network/if-pre-up.d/vde2
+ install -D -m 0755 debian/network/if-post-down.d/vde2 debian/vde2/etc/network/if-post-down.d/vde2
+ dh_fixperms
+ dh_makeshlibs
+ dh_installdeb
+ dh_shlibdeps -L libvdeplug3 -l debian/libvdeplug3/usr/bin
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb -- -D
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
More information about the Pkg-vsquare-changes
mailing list