[pkg-wpa-devel] Bug#384299: wpasupplicant: IEEE802.1x - Failed to set encryption

Wed Aug 23 10:04:54 UTC 2006

Package: wpasupplicant
Version: 0.5.4-5
Severity: normal

Hi,

For some time now I've been unable to use wpasupplicant with IEEE802.1x. I tried it with both ipw2100 and ipw2200 boards and it allways complaints about "Failing to set encryption" and:
 ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported

A small part of the log is the following:
State: SCANNING -> ASSOCIATED
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:0f:24:7a:bf:c0
No keys have been configured - skip key clearing
Associated with 00:0f:24:7a:bf:c0
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
RX EAPOL from 00:0f:24:7a:bf:c0
RX EAPOL - hexdump(len=46): 01 00 00 28 01 01 00 28 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 2d 55 2c 6e 61 73 69 64 3d 61 70 31 36 30 2c 70 6f 72 74 69 64 3d 30 00 00
Setting authentication timeout: 70 sec 0 usec
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: EAP-Request Identity data - hexdump_ascii(len=35):
     00 6e 65 74 77 6f 72 6b 69 64 3d 65 2d 55 2c 6e   _networkid=e-U,n
     61 73 69 64 3d 61 70 31 36 30 2c 70 6f 72 74 69   asid=ap160,porti
     64 3d 30                                          d=0
EAP: using anonymous identity - hexdump_ascii(len=13):
     72 6c 6f 70 65 73 40 69 70 62 2e 70 74            rlopes at ipb.pt
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL - hexdump(len=22): 01 00 00 12 02 01 00 12 01 72 6c 6f 70 65 73 40 69 70 62 2e 70 74
EAPOL: SUPP_BE entering state RECEIVE
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
Scan timeout - try to get results
Received 531 bytes of scan results (3 BSSes)
Scan results: 3
Selecting BSS from priority group 0
0: 00:0f:24:7a:c9:90 ssid='e-U' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
   skip - no WPA/RSN IE
1: 00:0f:24:7a:bf:c0 ssid='e-U' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
   skip - blacklisted
2: 00:0f:24:7a:bf:c0 ssid='guest-e-U' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - blacklisted
   selected non-WPA AP 00:0f:24:7a:c9:90 ssid='e-U'
Trying to associate with 00:0f:24:7a:c9:90 (SSID='e-U' freq=0 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_ipw_set_auth_alg: auth_alg=0x1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: clearing own WPA/RSN IE
No keys have been configured - skip key clearing
wpa_driver_ipw_set_drop_unencrypted: enabled=1
State: ASSOCIATED -> ASSOCIATING
WEXT: Operstate: linkmode=-1, operstate=5
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b1a len=12
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Added BSSID 00:0f:24:7a:c9:90 into blacklist
State: ASSOCIATING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
Failed to set encryption.

I'm launching wpasupplicant as:
# wpa_supplicant -c /tmp/wpa_supplicant.conf -i eth1 -dd -D ipw

Any ideia?

Cheers,

/rp

-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages wpasupplicant depends on:
ii  libc6                        2.3.6.ds1-2 GNU C Library: Shared libraries
ii  libncurses5                  5.5-2       Shared libraries for terminal hand
ii  libreadline5                 5.1-7       GNU readline and history libraries
ii  libssl0.9.8                  0.9.8b-2    SSL shared libraries

Versions of packages wpasupplicant recommends:
ii  dhcp3-client                  3.0.4-7    DHCP Client

-- no debconf information