[pkg-wpa-devel] r932 - in /wpasupplicant/trunk/debian/patches: 00_defconfig.patch 01_defconfig.patch series

Wed Dec 26 03:13:01 UTC 2007

Author: kelmo-guest
Date: Wed Dec 26 03:13:01 2007
New Revision: 932

URL: http://svn.debian.org/wsvn/pkg-wpa/?sc=1&rev=932
Log:
rename 01_defconfig.patch to 00_defconfig.patch, it will always remain as the first patch in our series

Added:
    wpasupplicant/trunk/debian/patches/00_defconfig.patch
Removed:
    wpasupplicant/trunk/debian/patches/01_defconfig.patch
Modified:
    wpasupplicant/trunk/debian/patches/series

Added: wpasupplicant/trunk/debian/patches/00_defconfig.patch
URL: http://svn.debian.org/wsvn/pkg-wpa/wpasupplicant/trunk/debian/patches/00_defconfig.patch?rev=932&op=file
==============================================================================

--- wpasupplicant/trunk/debian/patches/00_defconfig.patch (added)
+++ wpasupplicant/trunk/debian/patches/00_defconfig.patch Wed Dec 26 03:13:01 2007
@@ -1,0 +1,325 @@
+--- /dev/null
++++ b/wpa_supplicant/.config
+@@ -0,0 +1,322 @@
++# Debian's wpa_supplicant build time configuration
++
++# Driver interface for Host AP driver
++CONFIG_DRIVER_HOSTAP=y
++
++# Driver interface for Agere driver
++#CONFIG_DRIVER_HERMES=y
++# Change include directories to match with the local setup
++#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
++#CFLAGS += -I../../include/wireless
++
++# Driver interface for madwifi driver
++#CONFIG_DRIVER_MADWIFI=y
++# Change include directories to match with the local setup
++#CFLAGS += -I../madwifi/wpa
++
++# Driver interface for Prism54 driver
++# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
++# for developers only)
++#CONFIG_DRIVER_PRISM54=y
++
++# Driver interface for ndiswrapper
++#CONFIG_DRIVER_NDISWRAPPER=y
++
++# Driver interface for Atmel driver
++CONFIG_DRIVER_ATMEL=y
++
++# Driver interface for Broadcom driver
++#CONFIG_DRIVER_BROADCOM=y
++# Example path for wlioctl.h; change to match your configuration
++#CFLAGS += -I/opt/WRT54GS/release/src/include
++# Non-GPL header required
++
++# Driver interface for Intel ipw2100/2200 driver
++#CONFIG_DRIVER_IPW=y
++# Deprecated since Linux 2.6.14
++
++# Driver interface for Ralink driver
++#CONFIG_DRIVER_RALINK=y
++# rt2x00 supports DRIVER_WEXT
++
++# Driver interface for generic Linux wireless extensions
++CONFIG_DRIVER_WEXT=y
++
++# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
++#CONFIG_DRIVER_BSD=y
++#CFLAGS += -I/usr/local/include
++#LIBS += -L/usr/local/lib
++
++# Driver interface for Windows NDIS
++#CONFIG_DRIVER_NDIS=y
++#CFLAGS += -I/usr/include/w32api/ddk
++#LIBS += -L/usr/local/lib
++# For native build using mingw
++#CONFIG_NATIVE_WINDOWS=y
++# Additional directories for cross-compilation on Linux host for mingw target
++#CFLAGS += -I/opt/mingw/mingw32/include/ddk
++#LIBS += -L/opt/mingw/mingw32/lib
++#CC=mingw32-gcc
++# By default, driver_ndis uses WinPcap for low-level operations. This can be
++# replaced with the following option which replaces WinPcap calls with NDISUIO.
++# However, this requires that WZC is disabled (net stop wzcsvc) before starting
++# wpa_supplicant.
++# CONFIG_USE_NDISUIO=y
++
++# Driver interface for development testing
++CONFIG_DRIVER_TEST=y
++
++# Driver interface for wired Ethernet drivers
++CONFIG_DRIVER_WIRED=y
++
++# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
++# included)
++CONFIG_IEEE8021X_EAPOL=y
++
++# EAP-MD5
++CONFIG_EAP_MD5=y
++
++# EAP-MSCHAPv2
++CONFIG_EAP_MSCHAPV2=y
++
++# EAP-TLS
++CONFIG_EAP_TLS=y
++
++# EAL-PEAP
++CONFIG_EAP_PEAP=y
++
++# EAP-TTLS
++CONFIG_EAP_TTLS=y
++
++# EAP-FAST
++# Note: Default OpenSSL package does not include support for all the
++# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
++# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
++# to add the needed functions.
++#CONFIG_EAP_FAST=y
++
++# EAP-GTC
++CONFIG_EAP_GTC=y
++
++# EAP-OTP
++CONFIG_EAP_OTP=y
++
++# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
++CONFIG_EAP_SIM=y
++
++# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
++CONFIG_EAP_PSK=y
++
++# EAP-PAX
++CONFIG_EAP_PAX=y
++
++# LEAP
++CONFIG_EAP_LEAP=y
++
++# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
++CONFIG_EAP_AKA=y
++
++# EAP-SAKE
++#CONFIG_EAP_SAKE=y
++
++# EAP-GPSK
++#CONFIG_EAP_GPSK=y
++# Include support for optional SHA256 cipher suite in EAP-GPSK
++#CONFIG_EAP_GPSK_SHA256=y
++
++# EAP-TNC and related Trusted Network Connect support (experimental)
++#CONFIG_EAP_TNC=y
++
++# EAP-WSC for Wi-Fi Protected Setup
++#CONFIG_EAP_WSC=y
++
++# PKCS#12 (PFX) support (used to read private key and certificate file from
++# a file that usually has extension .p12 or .pfx)
++CONFIG_PKCS12=y
++
++# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
++# engine.
++CONFIG_SMARTCARD=y
++
++# PC/SC interface for smartcards (USIM, GSM SIM)
++# Enable this if EAP-SIM or EAP-AKA is included
++CONFIG_PCSC=y
++
++# Development testing
++#CONFIG_EAPOL_TEST=y
++
++# Select control interface backend for external programs, e.g, wpa_cli:
++# unix = UNIX domain sockets (default for Linux/*BSD)
++# udp = UDP sockets using localhost (127.0.0.1)
++# named_pipe = Windows Named Pipe (default for Windows)
++# y = use default (backwards compatibility)
++# If this option is commented out, control interface is not included in the
++# build.
++CONFIG_CTRL_IFACE=y
++
++# Include support for GNU Readline and History Libraries in wpa_cli.
++# When building a wpa_cli binary for distribution, please note that these
++# libraries are licensed under GPL and as such, BSD license may not apply for
++# the resulting binary.
++CONFIG_READLINE=y
++
++# Remove debugging code that is printing out debug message to stdout.
++# This can be used to reduce the size of the wpa_supplicant considerably
++# if debugging code is not needed. The size reduction can be around 35%
++# (e.g., 90 kB).
++#CONFIG_NO_STDOUT_DEBUG=y
++
++# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
++# 35-50 kB in code size.
++#CONFIG_NO_WPA=y
++
++# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
++# save about 1 kB in code size when building only WPA-Personal (no EAP support)
++# or 6 kB if building for WPA-Enterprise.
++#CONFIG_NO_WPA2=y
++
++# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
++# This option can be used to reduce code size by removing support for
++# converting ASCII passphrases into PSK. If this functionality is removed, the
++# PSK can only be configured as the 64-octet hexstring (e.g., from
++# wpa_passphrase). This saves about 0.5 kB in code size.
++#CONFIG_NO_WPA_PASSPHRASE=y
++
++# Remove AES extra functions. This can be used to reduce code size by about
++# 1.5 kB by removing extra AES modes that are not needed for commonly used
++# client configurations (they are needed for some EAP types).
++#CONFIG_NO_AES_EXTRAS=y
++
++# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
++# This can be used if ap_scan=1 mode is never enabled.
++#CONFIG_NO_SCAN_PROCESSING=y
++
++# Select configuration backend:
++# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
++#	path is given on command line, not here; this option is just used to
++#	select the backend that allows configuration files to be used)
++# winreg = Windows registry (see win_example.reg for an example)
++CONFIG_BACKEND=file
++
++# Remove configuration write functionality (i.e., to allow the configuration
++# file to be updated based on runtime configuration changes). The runtime
++# configuration can still be changed, the changes are just not going to be
++# persistent over restarts. This option can be used to reduce code size by
++# about 3.5 kB.
++#CONFIG_NO_CONFIG_WRITE=y
++
++# Remove support for configuration blobs to reduce code size by about 1.5 kB.
++#CONFIG_NO_CONFIG_BLOBS=y
++
++# Select program entry point implementation:
++# main = UNIX/POSIX like main() function (default)
++# main_winsvc = Windows service (read parameters from registry)
++# main_none = Very basic example (development use only)
++CONFIG_MAIN=main
++
++# Select wrapper for operatins system and C library specific functions
++# unix = UNIX/POSIX like systems (default)
++# win32 = Windows systems
++# none = Empty template
++CONFIG_OS=unix
++
++# Select event loop implementation
++# eloop = select() loop (default)
++# eloop_win = Windows events and WaitForMultipleObject() loop
++# eloop_none = Empty template
++CONFIG_ELOOP=eloop
++
++# Select layer 2 packet implementation
++# linux = Linux packet socket (default)
++# pcap = libpcap/libdnet/WinPcap
++# freebsd = FreeBSD libpcap
++# winpcap = WinPcap with receive thread
++# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
++# none = Empty template
++CONFIG_L2_PACKET=linux
++
++# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
++CONFIG_PEERKEY=y
++
++# IEEE 802.11w (management frame protection)
++# This version is an experimental implementation based on IEEE 802.11w/D1.0
++# draft and is subject to change since the standard has not yet been finalized.
++# Driver support is also needed for IEEE 802.11w.
++#CONFIG_IEEE80211W=y
++
++# Select TLS implementation
++# openssl = OpenSSL (default)
++# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
++# internal = Internal TLSv1 implementation (experimental)
++# none = Empty template
++CONFIG_TLS=openssl
++
++# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
++# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
++# even though the core GnuTLS library is released under LGPL, this extra
++# library uses GPL and as such, the terms of GPL apply to the combination
++# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
++# apply for distribution of the resulting binary.
++#CONFIG_GNUTLS_EXTRA=y
++
++# If CONFIG_TLS=internal is used, additional library and include paths are
++# needed for LibTomMath. Alternatively, an integrated, minimal version of
++# LibTomMath can be used. See beginning of libtommath.c for details on benefits
++# and drawbacks of this option.
++#CONFIG_INTERNAL_LIBTOMMATH=y
++#ifndef CONFIG_INTERNAL_LIBTOMMATH
++#LTM_PATH=/usr/src/libtommath-0.39
++#CFLAGS += -I$(LTM_PATH)
++#LIBS += -L$(LTM_PATH)
++#LIBS_p += -L$(LTM_PATH)
++#endif
++
++# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
++# This is only for Windows builds and requires WMI-related header files and
++# WbemUuid.Lib from Platform SDK even when building with MinGW.
++#CONFIG_NDIS_EVENTS_INTEGRATED=y
++#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
++
++# Add support for DBus control interface
++CONFIG_CTRL_IFACE_DBUS=y
++
++# Add support for loading EAP methods dynamically as shared libraries.
++# When this option is enabled, each EAP method can be either included
++# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
++# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
++# be loaded in the beginning of the wpa_supplicant configuration file
++# (see load_dynamic_eap parameter in the example file) before being used in
++# the network blocks.
++#
++# Note that some shared parts of EAP methods are included in the main program
++# and in order to be able to use dynamic EAP methods using these parts, the
++# main program must have been build with the EAP method enabled (=y or =dyn).
++# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
++# unless at least one of them was included in the main build to force inclusion
++# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
++# in the main build to be able to load these methods dynamically.
++#
++# Please also note that using dynamic libraries will increase the total binary
++# size. Thus, it may not be the best option for targets that have limited
++# amount of memory/flash.
++#CONFIG_DYNAMIC_EAP_METHODS=y
++
++# Include client MLME (management frame processing).
++# This can be used to move MLME processing of Devicescape IEEE 802.11 stack
++# into user space.
++#CONFIG_CLIENT_MLME=y
++# Currently, driver_devicescape.c build requires some additional parameters
++# to be able to include some of the kernel header files. Following lines can
++# be used to set these (WIRELESS_DEV must point to the root directory of the
++# wireless-dev.git tree).
++#WIRELESS_DEV=/usr/src/wireless-dev
++#CFLAGS += -I$(WIRELESS_DEV)/net/mac80211
++
++# IEEE 802.11r/D4.1 (Fast BSS Transition)
++# This enables an experimental implementation of a draft version of
++# IEEE 802.11r. This draft is still subject to change, so it should be noted
++# that this version may not comply with the final standard.
++#CONFIG_IEEE80211R=y
++
++# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
++CONFIG_DEBUG_FILE=y

Modified: wpasupplicant/trunk/debian/patches/series
URL: http://svn.debian.org/wsvn/pkg-wpa/wpasupplicant/trunk/debian/patches/series?rev=932&op=diff
==============================================================================
--- wpasupplicant/trunk/debian/patches/series (original)
+++ wpasupplicant/trunk/debian/patches/series Wed Dec 26 03:13:01 2007
@@ -1,4 +1,4 @@
-01_defconfig.patch
+00_defconfig.patch
 10_dbus_group_policy.patch
 11_dbus_system_service_activation.patch
 20_madwifi_headers.patch


