[pkg-wpa-devel] Bug#833507: wpasupplicant: Unable to connect WLAN (wlan0: CTRL-EVENT-SCAN-FAILED ret=-22)
Support
support at take3.ro
Fri Aug 5 08:51:27 UTC 2016
Package: wpasupplicant
Version: 2.5-2
Severity: important
Dear Maintainer,
after update to version 2.5-1 or 2.5-2 i am not able to connect to our WLAN anymore.
Downgrading to version 2.3-2.4 solves the problem. Here the syslog entries (complete
block of consecutive lines from syslog - nothing deleted, only a bit anonymized):
Aug 5 11:17:29 <host> NetworkManager[4695]: <info> [1470385049.3827] device (wlan0): Activation: starting connection '<SSID>' (<UUID>)
Aug 5 11:17:29 <host> NetworkManager[4695]: <info> [1470385049.3829] audit: op="connection-activate" uuid="<UUID>" name="<SSID>" pid=6107 uid=1000 result="success"
Aug 5 11:17:29 <host> NetworkManager[4695]: <info> [1470385049.3830] device (wlan0): state change: disconnected -> prepare (reason 'none') [30 40 0]
Aug 5 11:17:29 <host> NetworkManager[4695]: <info> [1470385049.3848] device (wlan0): state change: prepare -> config (reason 'none') [40 50 0]
Aug 5 11:17:29 <host> NetworkManager[4695]: <info> [1470385049.3851] device (wlan0): Activation: (wifi) access point '<SSID>' has security, but secrets are required.
Aug 5 11:17:29 <host> NetworkManager[4695]: <info> [1470385049.3851] device (wlan0): state change: config -> need-auth (reason 'none') [50 60 0]
Aug 5 11:17:29 <host> NetworkManager[4695]: <info> [1470385049.3897] device (wlan0): state change: need-auth -> prepare (reason 'none') [60 40 0]
Aug 5 11:17:29 <host> NetworkManager[4695]: <info> [1470385049.3927] device (wlan0): state change: prepare -> config (reason 'none') [40 50 0]
Aug 5 11:17:29 <host> NetworkManager[4695]: <info> [1470385049.3929] device (wlan0): Activation: (wifi) connection '<SSID>' has security, and secrets exist. No new secrets needed.
Aug 5 11:17:29 <host> NetworkManager[4695]: <info> [1470385049.3929] Config: added 'ssid' value '<SSID>'
Aug 5 11:17:29 <host> NetworkManager[4695]: <info> [1470385049.3930] Config: added 'scan_ssid' value '1'
Aug 5 11:17:29 <host> NetworkManager[4695]: <info> [1470385049.3930] Config: added 'key_mgmt' value 'WPA-PSK'
Aug 5 11:17:29 <host> NetworkManager[4695]: <info> [1470385049.3930] Config: added 'psk' value '<omitted>'
Aug 5 11:17:29 <host> NetworkManager[4695]: <info> [1470385049.4105] sup-iface[0xa1a4b0,wlan0]: config: set interface ap_scan to 1
Aug 5 11:17:29 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:30 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:31 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:32 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:33 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:34 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:35 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:36 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:37 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:38 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:39 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:40 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:41 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:42 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:43 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:44 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:45 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:46 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:47 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:48 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:49 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:50 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:51 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:52 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:53 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:54 <host> wpa_supplicant[5054]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
Aug 5 11:17:54 <host> NetworkManager[4695]: <warn> [1470385074.7231] device (wlan0): Activation: (wifi) association took too long, failing activation
Aug 5 11:17:54 <host> NetworkManager[4695]: <info> [1470385074.7232] device (wlan0): state change: config -> failed (reason 'ssid-not-found') [50 120 53]
Aug 5 11:17:54 <host> NetworkManager[4695]: <warn> [1470385074.7243] device (wlan0): Activation: failed for connection '<SSID>'
Aug 5 11:17:54 <host> NetworkManager[4695]: <info> [1470385074.7256] device (wlan0): state change: failed -> disconnected (reason 'none') [120 30 0]
Aug 5 11:17:54 <host> NetworkManager[4695]: <info> [1470385074.7277] device (wlan0): supplicant interface state: inactive -> disconnected
Aug 5 11:17:55 <host> NetworkManager[4695]: <info> [1470385075.2940] device (wlan0): supplicant interface state: disconnected -> inactive
My wlan chip is a "Broadcom Corporation BCM43142 802.11b/g/n (rev 01)" (Dell VOSTRO), so
i have to use the non-free package broadcom-sta-dkms.
Regrads, Robert
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.6.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages wpasupplicant depends on:
ii adduser 3.115
ii libc6 2.23-4
ii libdbus-1-3 1.10.8-1
ii libnl-3-200 3.2.27-1
ii libnl-genl-3-200 3.2.27-1
ii libpcsclite1 1.8.17-1
ii libreadline6 6.3-8+b4
ii libssl1.0.2 1.0.2h-1
ii lsb-base 9.20160629
wpasupplicant recommends no packages.
Versions of packages wpasupplicant suggests:
pn libengine-pkcs11-openssl <none>
pn wpagui <none>
-- no debconf information
More information about the Pkg-wpa-devel
mailing list