[Pkg-xen-devel] Bug#603727: xen-hypervisor-4.0-amd64: i386 Dom0 crashes after doing some I/O on local storage (software Raid1 on SAS-drives with mpt2sas driver)
Ulrich Hochholdinger
uhochholdinger+debianbts at netpioneer.de
Tue Nov 16 19:37:08 UTC 2010
Package: xen-hypervisor-4.0-amd64
Version: 4.0.1-1
Severity: normal
My 32Bit Dom0-crashes with error "Out of SW-IOMMU space for 65536 bytes"
after doing moderate I/O on the local storage, which is a software-raid1
over 3 harddrives, connected to the builtin Perc H200 controller with ext3-fs.
The error is reproduceable with "dd if=/dev/zero of=bigfile bs=1024 count=1000000"
This bug only appears running this kernel as Dom0. Without hypervisor there
is no problem with this kernel.
Trying 32Bit HV or different settings for the HV or Dom0 kernel with different
combinations of the settings iommu swiotlb acpi ... doesnt solve this problem.
Strange: After degrading the raid down to 1 harddrive, I can't trigger this bug.
Writing over a lvm which is striped over these 3 Harddrives doesn't crash also.
Possibly "one dd" didn't do enough I/O to trigger this bug in these situations.
So I think this is a problem of either the mpt2sas-driver which is relatively
new in the kernel or a combination of raid1 and this driver. and appears only
running with a HV in front of the kernel.
System is
Dell Poweredge R710
2x Xeon X5650
96GB RAM
Perc H200
3 SAS-Harddrives (Linux-Software Raid1 over some partitons)
I attach kernel, and xen debugging output at the end of this report.
Regards
Ulli
Kernel and Debugging-Output:
(XEN) Xen version 4.0.1 (Debian 4.0.1-1) (waldi at debian.org) (gcc version 4.4.5 20100728 (prerelease) (Debian 4.4.4-8) ) Fri Sep 3 15:18:21 UTC 2010
(XEN) Console output is synchronous.
(XEN) Bootloader: GRUB 1.98+20100804-4
(XEN) Command line: placeholder dom0_mem=1024M loglvl=all guest_loglvl=all sync_console console_to_ring com1=115200,8n1 console=com1 lapic=debug apic_verbosity=debug apic=debug iommu=off
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 3 MBR signatures
(XEN) Found 3 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 00000000000a0000 (usable)
(XEN) 0000000000100000 - 00000000bf679000 (usable)
(XEN) 00000000bf679000 - 00000000bf68f000 (reserved)
(XEN) 00000000bf68f000 - 00000000bf6ce000 (ACPI data)
(XEN) 00000000bf6ce000 - 00000000c0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fe000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000001840000000 (usable)
(XEN) ACPI: RSDP 000F0A90, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000F0B94, 0094 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: FACP BF6B3F9C, 00F4 (r3 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: DSDT BF68F000, 3D5A (r1 DELL PE_SC3 1 INTL 20050624)
(XEN) ACPI: FACS BF6B6000, 0040
(XEN) ACPI: APIC BF6B3478, 015E (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: SPCR BF6B35D8, 0050 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: HPET BF6B362C, 0038 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: DMAR BF6B3668, 01B8 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: MCFG BF6B38C4, 003C (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: WD__ BF6B3904, 0134 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: SLIC BF6B3A3C, 0024 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: ERST BF692EDC, 0270 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: HEST BF69314C, 03A8 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: BERT BF692D5C, 0030 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: EINJ BF692D8C, 0150 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: SRAT BF6B3BC0, 0370 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: TCPA BF6B3F34, 0064 (r2 DELL PE_SC3 1 DELL 1)
(XEN) System RAM: 98294MB (100653156kB)
(XEN) SRAT: PXM 1 -> APIC 32 -> Node 0
(XEN) SRAT: PXM 2 -> APIC 0 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 34 -> Node 0
(XEN) SRAT: PXM 2 -> APIC 2 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 36 -> Node 0
(XEN) SRAT: PXM 2 -> APIC 4 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 48 -> Node 0
(XEN) SRAT: PXM 2 -> APIC 16 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 50 -> Node 0
(XEN) SRAT: PXM 2 -> APIC 18 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 52 -> Node 0
(XEN) SRAT: PXM 2 -> APIC 20 -> Node 1
(XEN) SRAT: Node 1 PXM 2 0-c0000000
(XEN) SRAT: Node 1 PXM 2 100000000-c40000000
(XEN) SRAT: Node 0 PXM 1 c40000000-1840000000
(XEN) NUMA: Allocated memnodemap from 183fdfe000 - 183fdff000
(XEN) NUMA: Using 18 for the hash shift.
(XEN) Domain heap initialised DMA width 32 bits
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.6 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[bf6b600c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
(XEN) Processor #32 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
(XEN) Processor #0 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
(XEN) Processor #34 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
(XEN) Processor #2 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled)
(XEN) Processor #36 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)
(XEN) Processor #4 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x30] enabled)
(XEN) Processor #48 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled)
(XEN) Processor #16 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x32] enabled)
(XEN) Processor #50 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
(XEN) Processor #18 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] enabled)
(XEN) Processor #52 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled)
(XEN) Processor #20 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) Overriding APIC driver with bigsmp
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
(XEN) IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Phys. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to ffff82c3ffffe000 (fee00000)
(XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000)
(XEN) mapped IOAPIC to ffff82c3ffffc000 (fec80000)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2660.078 MHz processor.
(XEN) Initing memory sharing.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) EPT supports 2MB super page.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) Getting VERSION: 1060015
(XEN) Getting VERSION: 1060015
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) Getting ID: 20000000
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) Suppress EOI broadcast on CPU#0
(XEN) enabled ExtINT on CPU#0
(XEN) Suppress EOI broadcast on CPU#1
(XEN) masked ExtINT on CPU#1
(XEN) Suppress EOI broadcast on CPU#2
(XEN) masked ExtINT on CPU#2
(XEN) Suppress EOI broadcast on CPU#3
(XEN) masked ExtINT on CPU#3
(XEN) Suppress EOI broadcast on CPU#4
(XEN) masked ExtINT on CPU#4
(XEN) Suppress EOI broadcast on CPU#5
(XEN) masked ExtINT on CPU#5
(XEN) Suppress EOI broadcast on CPU#6
(XEN) masked ExtINT on CPU#6
(XEN) Suppress EOI broadcast on CPU#7
(XEN) masked ExtINT on CPU#7
(XEN) Suppress EOI broadcast on CPU#8
(XEN) masked ExtINT on CPU#8
(XEN) Suppress EOI broadcast on CPU#9
(XEN) masked ExtINT on CPU#9
(XEN) Suppress EOI broadcast on CPU#10
(XEN) masked ExtINT on CPU#10
(XEN) Suppress EOI broadcast on CPU#11
(XEN) masked ExtINT on CPU#11
(XEN) Total of 12 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 0-0, 0-16, 0-17, 0-18, 0-19, 0-20, 0-21, 0-22, 0-23, 1-0, 1-1, 1-2, 1-3, 1-4, 1-5, 1-6, 1-7, 1-8, 1-9, 1-10, 1-11, 1-12, 1-13, 1-14, 1-15, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #0 registers: 24.
(XEN) number of IO-APIC #1 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #0......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00170020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 0
(XEN) ....... : IO APIC version: 0020
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 020 00 0 0 0 0 0 0 0 28
(XEN) 02 020 00 0 0 0 0 0 0 0 F0
(XEN) 03 020 00 0 0 0 0 0 0 0 30
(XEN) 04 020 00 0 0 0 0 0 0 0 F1
(XEN) 05 020 00 0 0 0 0 0 0 0 38
(XEN) 06 020 00 0 0 0 0 0 0 0 40
(XEN) 07 020 00 0 0 0 0 0 0 0 48
(XEN) 08 020 00 0 0 0 0 0 0 0 50
(XEN) 09 020 00 1 1 0 0 0 0 0 58
(XEN) 0a 020 00 0 0 0 0 0 0 0 60
(XEN) 0b 020 00 0 0 0 0 0 0 0 68
(XEN) 0c 020 00 0 0 0 0 0 0 0 70
(XEN) 0d 020 00 0 0 0 0 0 0 0 78
(XEN) 0e 020 00 0 0 0 0 0 0 0 88
(XEN) 0f 020 00 0 0 0 0 0 0 0 90
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #1......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00170020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 0
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ40 -> 0:1
(XEN) IRQ48 -> 0:3
(XEN) IRQ241 -> 0:4
(XEN) IRQ56 -> 0:5
(XEN) IRQ64 -> 0:6
(XEN) IRQ72 -> 0:7
(XEN) IRQ80 -> 0:8
(XEN) IRQ88 -> 0:9
(XEN) IRQ96 -> 0:10
(XEN) IRQ104 -> 0:11
(XEN) IRQ112 -> 0:12
(XEN) IRQ120 -> 0:13
(XEN) IRQ136 -> 0:14
(XEN) IRQ144 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 2659.9904 MHz.
(XEN) ..... host bus clock speed is 132.9995 MHz.
(XEN) ..... bus_scale = 0x00008834
(XEN) TSC is reliable, synchronization unnecessary
(XEN) Platform timer appears to have unexpectedly wrapped 10 or more times.
(XEN) Platform timer is 14.318MHz HPET
ÿ(XEN) Allocated console ring of 128 KiB.
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU11 resumed
(XEN) microcode.c:73:d32767 microcode: CPU8 resumed
(XEN) microcode.c:73:d32767 microcode: CPU9 resumed
(XEN) microcode.c:73:d32767 microcode: CPU7 resumed
(XEN) microcode.c:73:d32767 microcode: CPU5 resumed
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) microcode.c:73:d32767 microcode: CPU6 resumed
(XEN) microcode.c:73:d32767 microcode: CPU10 resumed
(XEN) microcode.c:73:d32767 microcode: CPU4 resumed
(XEN) Brought up 12 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) Turbo Mode detected!
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x164c000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000001800000000->0000001804000000 (245760 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: 00000000c1000000->00000000c164c000
(XEN) Init. ramdisk: 00000000c164c000->00000000c2d1b000
(XEN) Phys-Mach map: 00000000c2d1b000->00000000c2e1b000
(XEN) Start info: 00000000c2e1b000->00000000c2e1b4b4
(XEN) Page tables: 00000000c2e1c000->00000000c2e3a000
(XEN) Boot stack: 00000000c2e3a000->00000000c2e3b000
(XEN) TOTAL: 00000000c0000000->00000000c3000000
(XEN) ENTRY ADDRESS: 00000000c13fd000
(XEN) Dom0 has maximum 12 VCPUs
(XEN) Scrubbing Free RAM: ...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................done.
(XEN) trace.c:89:d32767 calc_tinfo_first_offset: NR_CPUs 128, offset_in_bytes 258, t_info_first_offset 65
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 176kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Reserving virtual address space above 0xf9c00000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-xen-686 (Debian 2.6.32-27) (maks at debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Oct 31 02:38:31 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] Xen: 00000000bf679000 - 00000000bf68f000 (reserved)
[ 0.000000] Xen: 00000000bf68f000 - 00000000bf6ce000 (ACPI data)
[ 0.000000] Xen: 00000000bf6ce000 - 00000000c0000000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 037ff000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000313fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 00313fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 313fe000 @ 100000-28f000
[ 0.000000] RAMDISK: 0164c000 - 02d1b000
[ 0.000000] ACPI: RSDP 000f0a90 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 000f0b94 00094 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP bf6b3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT bf68f000 03D5A (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS bf6b6000 00040
[ 0.000000] ACPI: APIC bf6b3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR bf6b35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET bf6b362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: XMAR bf6b3668 001B8 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG bf6b38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ bf6b3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC bf6b3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST bf692edc 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST bf69314c 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT bf692d5c 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ bf692d8c 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT bf6b3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA bf6b3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 236MB HIGHMEM available.
[ 0.000000] 787MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 313fe000
[ 0.000000] low ram: 0 - 313fe000
[ 0.000000] node 0 low ram: 00000000 - 313fe000
[ 0.000000] node 0 bootmap 00007000 - 0000d280
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 00313fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0002e1e000 - 0002e3c000] XEN PAGETABLES ==> [0002e1e000 - 0002e3c000]
[ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #4 [0001000000 - 00015268d4] TEXT DATA BSS ==> [0001000000 - 00015268d4]
[ 0.000000] #5 [000164c000 - 0002d1b000] RAMDISK ==> [000164c000 - 0002d1b000]
[ 0.000000] #6 [0002d1b000 - 0002e1e000] XEN START INFO ==> [0002d1b000 - 0002e1e000]
[ 0.000000] #7 [0001527000 - 00015273d1] BRK ==> [0001527000 - 00015273d1]
[ 0.000000] #8 [0000100000 - 0000271000] PGTABLE ==> [0000100000 - 0000271000]
[ 0.000000] #9 [0000007000 - 000000e000] BOOTMAP ==> [0000007000 - 000000e000]
[ 0.000000] found SMP MP-table at [c00fe710] fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000313fe
[ 0.000000] HighMem 0x000313fe -> 0x00040000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] On node 0 totalpages: 262048
[ 0.000000] free_area_init_node: node 0, pgdat c13f2b60, node_mem_map c2e3c000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3968 pages, LIFO batch:0
[ 0.000000] Normal zone: 1544 pages used for memmap
[ 0.000000] Normal zone: 196086 pages, LIFO batch:31
[ 0.000000] HighMem zone: 473 pages used for memmap
[ 0.000000] HighMem zone: 59945 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x30] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x32] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 0, address 0xfec80000, GSI 32-32
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 288
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:7f679000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c3643000 s37656 r0 d23784 u65536
[ 0.000000] pcpu-alloc: s37656 r0 d23784 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
[ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11
[ 33.336926] trying to map vcpu_info 0 at c3644010, mfn 1803644, offset 16
[ 33.343668] cpu 0 using vcpu_info at c3644010
[ 33.347999] trying to map vcpu_info 1 at c3654010, mfn 1803654, offset 16
[ 33.354757] cpu 1 using vcpu_info at c3654010
[ 33.359092] trying to map vcpu_info 2 at c3664010, mfn 1803664, offset 16
[ 33.365851] cpu 2 using vcpu_info at c3664010
[ 33.370185] trying to map vcpu_info 3 at c3674010, mfn 1803674, offset 16
[ 33.376945] cpu 3 using vcpu_info at c3674010
[ 33.381278] trying to map vcpu_info 4 at c3684010, mfn 1803684, offset 16
[ 33.388036] cpu 4 using vcpu_info at c3684010
[ 33.392371] trying to map vcpu_info 5 at c3694010, mfn 1803694, offset 16
[ 33.399130] cpu 5 using vcpu_info at c3694010
[ 33.403463] trying to map vcpu_info 6 at c36a4010, mfn 18036a4, offset 16
[ 33.410224] cpu 6 using vcpu_info at c36a4010
[ 33.414557] trying to map vcpu_info 7 at c36b4010, mfn 18036b4, offset 16
[ 33.421316] cpu 7 using vcpu_info at c36b4010
[ 33.425649] trying to map vcpu_info 8 at c36c4010, mfn 18036c4, offset 16
[ 33.432409] cpu 8 using vcpu_info at c36c4010
[ 33.436742] trying to map vcpu_info 9 at c36d4010, mfn 18036d4, offset 16
[ 33.443502] cpu 9 using vcpu_info at c36d4010
[ 33.447836] trying to map vcpu_info 10 at c36e4010, mfn 18036e4, offset 16
[ 33.454681] cpu 10 using vcpu_info at c36e4010
[ 33.459101] trying to map vcpu_info 11 at c36f4010, mfn 18036f4, offset 16
[ 33.465948] cpu 11 using vcpu_info at c36f4010
[ 33.470367] Xen: using vcpu_info placement
[ 33.474443] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259999
[ 33.482416] Kernel command line: placeholder root=UUID=f827be45-01f5-4ee9-8c81-f53b8d95df0f ro elevator=deadline console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 33.498838] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 33.504837] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 33.511966] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 33.518835] Enabling fast FPU save and restore... done.
[ 33.523879] Enabling unmasked SIMD FPU exception support... done.
[ 33.529945] Initializing CPU#0
[ 33.540486] DMA: Placing 64MB software IO TLB between c37c6000 - c77c6000
[ 33.547094] DMA: software IO TLB at phys 0x37c6000 - 0x77c6000
[ 33.552903] xen_swiotlb_fixup: buf=c37c6000 size=67108864
[ 33.575042] xen_swiotlb_fixup: buf=c7826000 size=32768
[ 33.586417] Initializing HighMem for node 0 (000313fe:00040000)
[ 33.609861] Memory: 940488k/1048576k available (2631k kernel code, 106996k reserved, 1450k data, 396k init, 241672k highmem)
[ 33.620887] virtual kernel memory layout:
[ 33.620888] fixmap : 0xf9956000 - 0xf9bff000 (2724 kB)
[ 33.620889] pkmap : 0xf9400000 - 0xf9600000 (2048 kB)
[ 33.620890] vmalloc : 0xf1bfe000 - 0xf93fe000 ( 120 MB)
[ 33.620891] lowmem : 0xc0000000 - 0xf13fe000 ( 787 MB)
[ 33.620892] .init : 0xc13fd000 - 0xc1460000 ( 396 kB)
[ 33.620893] .data : 0xc1291e51 - 0xc13fc998 (1450 kB)
[ 33.620894] .text : 0xc1000000 - 0xc1291e51 (2631 kB)
[ 33.664960] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 33.672657] Hierarchical RCU implementation.
[ 33.676881] NR_IRQS:1536
[ 33.679473] xen: --> irq=0
[ 33.682075] xen: --> irq=1
[ 33.684762] xen: --> irq=2
[ 33.687446] xen: --> irq=3
[ 33.690135] xen: --> irq=4
[ 33.692820] xen: --> irq=5
[ 33.695507] xen: --> irq=6
[ 33.698192] xen: --> irq=7
[ 33.700878] xen: --> irq=8
[ 33.703566] xen: --> irq=9
[ 33.706253] xen: --> irq=10
[ 33.709026] xen: --> irq=11
[ 33.711798] xen: --> irq=12
[ 33.714572] xen: --> irq=13
[ 33.717346] xen: --> irq=14
[ 33.720118] xen: --> irq=15
[ 33.722900] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 33.729219] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 33.735802] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[ 33.742910] xen: registering gsi 9 triggering 0 polarity 0
[ 33.748368] xen_allocate_pirq: returning irq 9 for gsi 9
[ 33.753657] xen: --> irq=9
(XEN) IOAPIC[0]: Set PCI routing entry (0-9 -> 0x58 -> IRQ 9 Mode:1 Active:0)
[ 33.763188] xen: acpi sci 9
[ 33.768009] Console: colour VGA+ 80x25
[ 33.771580] console [hvc0] enabled, bootconsole disabled
[ 33.771580] console [hvc0] enabled, bootconsole disabled
[ 33.782253] Xen: using vcpuop timer interface
[ 33.786660] installing Xen timer for CPU 0
[ 33.790837] Detected 2660.078 MHz processor.
[ 33.795156] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.15 BogoMIPS (lpj=10640312)
[ 33.805903] Security Framework initialized
[ 33.810061] SELinux: Disabled at boot.
[ 33.813961] Mount-cache hash table entries: 512
[ 33.818708] Initializing cgroup subsys ns
[ 33.822662] Initializing cgroup subsys cpuacct
[ 33.827162] Initializing cgroup subsys devices
[ 33.831668] Initializing cgroup subsys freezer
[ 33.836173] Initializing cgroup subsys net_cls
[ 33.840710] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 33.845448] CPU: L2 cache: 256K
[ 33.848652] CPU: L3 cache: 12288K
[ 33.852039] CPU: Unsupported number of siblings 32
[ 33.856633] mce: CPU supports 9 MCE banks
[ 33.860983] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
[ 33.870316] SMP alternatives: switching to UP code
[ 33.905773] ACPI: Core revision 20090903
[ 33.914571] calling migration_init+0x0/0x43 @ 1
[ 33.919130] initcall migration_init+0x0/0x43 returned 0 after 3906 usecs
[ 33.925856] calling spawn_ksoftirqd+0x0/0x43 @ 1
[ 33.930645] initcall spawn_ksoftirqd+0x0/0x43 returned 0 after 3906 usecs
[ 33.937469] calling init_call_single_data+0x0/0x64 @ 1
[ 33.942755] initcall init_call_single_data+0x0/0x64 returned 0 after 0 usecs
[ 33.949862] calling spawn_softlockup_task+0x0/0x5b @ 1
[ 33.955177] initcall spawn_softlockup_task+0x0/0x5b returned 0 after 3906 usecs
[ 33.962514] calling relay_init+0x0/0xd @ 1
[ 33.966762] initcall relay_init+0x0/0xd returned 0 after 0 usecs
[ 33.972827] calling tracer_alloc_buffers+0x0/0x132 @ 1
[ 33.978132] initcall tracer_alloc_buffers+0x0/0x132 returned 0 after 0 usecs
[ 33.985219] calling init_trace_printk+0x0/0xa @ 1
[ 33.990073] initcall init_trace_printk+0x0/0xa returned 0 after 0 usecs
[ 33.996809] installing Xen timer for CPU 1
[ 34.000932] SMP alternatives: switching to SMP code
[ 34.035884] Initializing CPU#1
[ 34.035944] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 34.035949] CPU: L2 cache: 256K
[ 34.035953] CPU: L3 cache: 12288K
[ 34.035960] CPU: Unsupported number of siblings 32
[ 34.036068] installing Xen timer for CPU 2
[ 34.059440] Initializing CPU#2
[ 34.059469] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 34.059471] CPU: L2 cache: 256K
[ 34.059473] CPU: L3 cache: 12288K
[ 34.059477] CPU: Unsupported number of siblings 32
[ 34.059591] installing Xen timer for CPU 3
[ 34.082966] Initializing CPU#3
[ 34.083015] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 34.083022] CPU: L2 cache: 256K
[ 34.083024] CPU: L3 cache: 12288K
[ 34.083027] CPU: Unsupported number of siblings 32
[ 34.083130] installing Xen timer for CPU 4
[ 34.106502] Initializing CPU#4
[ 34.106530] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 34.106533] CPU: L2 cache: 256K
[ 34.106535] CPU: L3 cache: 12288K
[ 34.106538] CPU: Unsupported number of siblings 32
[ 34.106654] installing Xen timer for CPU 5
[ 34.130031] Initializing CPU#5
[ 34.130080] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 34.130085] CPU: L2 cache: 256K
[ 34.130088] CPU: L3 cache: 12288K
[ 34.130095] CPU: Unsupported number of siblings 32
[ 34.130203] installing Xen timer for CPU 6
[ 34.153574] Initializing CPU#6
[ 34.153601] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 34.153604] CPU: L2 cache: 256K
[ 34.153606] CPU: L3 cache: 12288K
[ 34.153609] CPU: Unsupported number of siblings 32
[ 34.153718] installing Xen timer for CPU 7
[ 34.177094] Initializing CPU#7
[ 34.177143] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 34.177150] CPU: L2 cache: 256K
[ 34.177152] CPU: L3 cache: 12288K
[ 34.177155] CPU: Unsupported number of siblings 32
[ 34.177259] installing Xen timer for CPU 8
[ 34.200630] Initializing CPU#8
[ 34.200657] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 34.200660] CPU: L2 cache: 256K
[ 34.200662] CPU: L3 cache: 12288K
[ 34.200665] CPU: Unsupported number of siblings 32
[ 34.200777] installing Xen timer for CPU 9
[ 34.224155] Initializing CPU#9
[ 34.224189] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 34.224192] CPU: L2 cache: 256K
[ 34.224194] CPU: L3 cache: 12288K
[ 34.224197] CPU: Unsupported number of siblings 32
[ 34.224299] installing Xen timer for CPU 10
[ 34.247760] Initializing CPU#10
[ 34.247787] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 34.247790] CPU: L2 cache: 256K
[ 34.247792] CPU: L3 cache: 12288K
[ 34.247795] CPU: Unsupported number of siblings 32
[ 34.247906] installing Xen timer for CPU 11
[ 34.271508] Initializing CPU#11
[ 34.271556] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 34.271564] CPU: L2 cache: 256K
[ 34.271565] CPU: L3 cache: 12288K
[ 34.271569] CPU: Unsupported number of siblings 32
[ 34.271607] Brought up 12 CPUs
[ 34.294004] CPU0 attaching sched-domain:
[ 34.297979] domain 0: span 0-11 level CPU
[ 34.302136] groups: 0 1 2 3 4 5 6 7 8 9 10 11
[ 34.306731] CPU1 attaching sched-domain:
[ 34.310717] domain 0: span 0-11 level CPU
[ 34.314876] groups: 1 2 3 4 5 6 7 8 9 10 11 0
[ 34.319470] CPU2 attaching sched-domain:
[ 34.323456] domain 0: span 0-11 level CPU
[ 34.327616] groups: 2 3 4 5 6 7 8 9 10 11 0 1
[ 34.332210] CPU3 attaching sched-domain:
[ 34.336196] domain 0: span 0-11 level CPU
[ 34.340356] groups: 3 4 5 6 7 8 9 10 11 0 1 2
[ 34.344950] CPU4 attaching sched-domain:
[ 34.348937] domain 0: span 0-11 level CPU
[ 34.353096] groups: 4 5 6 7 8 9 10 11 0 1 2 3
[ 34.357689] CPU5 attaching sched-domain:
[ 34.361676] domain 0: span 0-11 level CPU
[ 34.365836] groups: 5 6 7 8 9 10 11 0 1 2 3 4
[ 34.370430] CPU6 attaching sched-domain:
[ 34.374416] domain 0: span 0-11 level CPU
[ 34.378574] groups: 6 7 8 9 10 11 0 1 2 3 4 5
[ 34.383169] CPU7 attaching sched-domain:
[ 34.387155] domain 0: span 0-11 level CPU
[ 34.391315] groups: 7 8 9 10 11 0 1 2 3 4 5 6
[ 34.395908] CPU8 attaching sched-domain:
[ 34.399895] domain 0: span 0-11 level CPU
[ 34.404054] groups: 8 9 10 11 0 1 2 3 4 5 6 7
[ 34.408648] CPU9 attaching sched-domain:
[ 34.412634] domain 0: span 0-11 level CPU
[ 34.416793] groups: 9 10 11 0 1 2 3 4 5 6 7 8
[ 34.421388] CPU10 attaching sched-domain:
[ 34.425460] domain 0: span 0-11 level CPU
[ 34.429619] groups: 10 11 0 1 2 3 4 5 6 7 8 9
[ 34.434216] CPU11 attaching sched-domain:
[ 34.438287] domain 0: span 0-11 level CPU
[ 34.442446] groups: 11 0 1 2 3 4 5 6 7 8 9 10
[ 34.447627] devtmpfs: initialized
[ 34.451277] calling init_mmap_min_addr+0x0/0xd @ 1
[ 34.456062] initcall init_mmap_min_addr+0x0/0xd returned 0 after 0 usecs
[ 34.462823] calling init_cpufreq_transition_notifier_list+0x0/0x14 @ 1
[ 34.469496] initcall init_cpufreq_transition_notifier_list+0x0/0x14 returned 0 after 0 usecs
[ 34.477988] calling net_ns_init+0x0/0xce @ 1
[ 34.482447] initcall net_ns_init+0x0/0xce returned 0 after 3906 usecs
[ 34.488907] calling e820_mark_nvs_memory+0x0/0x2d @ 1
[ 34.494107] initcall e820_mark_nvs_memory+0x0/0x2d returned 0 after 0 usecs
[ 34.501127] calling cpufreq_tsc+0x0/0x21 @ 1
[ 34.505546] initcall cpufreq_tsc+0x0/0x21 returned 0 after 0 usecs
[ 34.511788] calling pci_reboot_init+0x0/0xd @ 1
[ 34.516468] initcall pci_reboot_init+0x0/0xd returned 0 after 0 usecs
[ 34.522967] calling reboot_init+0x0/0xd @ 1
[ 34.527305] initcall reboot_init+0x0/0xd returned 0 after 0 usecs
[ 34.533452] calling init_lapic_sysfs+0x0/0x24 @ 1
[ 34.538310] initcall init_lapic_sysfs+0x0/0x24 returned 0 after 0 usecs
[ 34.544981] calling alloc_frozen_cpus+0x0/0x3 @ 1
[ 34.549834] initcall alloc_frozen_cpus+0x0/0x3 returned 0 after 0 usecs
[ 34.556505] calling sysctl_init+0x0/0x25 @ 1
[ 34.561022] initcall sysctl_init+0x0/0x25 returned 0 after 0 usecs
[ 34.567164] calling ksysfs_init+0x0/0x92 @ 1
[ 34.571587] initcall ksysfs_init+0x0/0x92 returned 0 after 0 usecs
[ 34.577825] calling async_init+0x0/0x4a @ 1
[ 34.582190] initcall async_init+0x0/0x4a returned 0 after 3906 usecs
[ 34.588572] calling init_jiffies_clocksource+0x0/0xa @ 1
[ 34.594032] initcall init_jiffies_clocksource+0x0/0xa returned 0 after 0 usecs
[ 34.601310] calling pm_init+0x0/0x4b @ 1
[ 34.605418] initcall pm_init+0x0/0x4b returned 0 after 3906 usecs
[ 34.611537] calling pm_disk_init+0x0/0xf @ 1
[ 34.615957] initcall pm_disk_init+0x0/0xf returned 0 after 0 usecs
[ 34.622198] calling swsusp_header_init+0x0/0x22 @ 1
[ 34.627223] initcall swsusp_header_init+0x0/0x22 returned 0 after 0 usecs
[ 34.634070] calling init_zero_pfn+0x0/0x10 @ 1
[ 34.638663] initcall init_zero_pfn+0x0/0x10 returned 0 after 0 usecs
[ 34.645076] calling filelock_init+0x0/0x25 @ 1
[ 34.649670] initcall filelock_init+0x0/0x25 returned 0 after 0 usecs
[ 34.656082] calling init_script_binfmt+0x0/0xc @ 1
[ 34.661022] initcall init_script_binfmt+0x0/0xc returned 0 after 0 usecs
[ 34.667783] calling init_elf_binfmt+0x0/0xc @ 1
[ 34.672462] initcall init_elf_binfmt+0x0/0xc returned 0 after 0 usecs
[ 34.678962] calling debugfs_init+0x0/0x46 @ 1
[ 34.683470] initcall debugfs_init+0x0/0x46 returned 0 after 0 usecs
[ 34.689795] calling securityfs_init+0x0/0x3d @ 1
[ 34.694563] initcall securityfs_init+0x0/0x3d returned 0 after 0 usecs
[ 34.701149] calling random32_init+0x0/0xa4 @ 1
[ 34.705742] initcall random32_init+0x0/0xa4 returned 0 after 0 usecs
[ 34.712155] calling virtio_init+0x0/0x1b @ 1
[ 34.716577] initcall virtio_init+0x0/0x1b returned 0 after 0 usecs
[ 34.722815] calling __gnttab_init+0x0/0x1b @ 1
[ 34.727440] Grant table initialized
[ 34.730961] initcall __gnttab_init+0x0/0x1b returned 0 after 3906 usecs
[ 34.737634] calling regulator_init+0x0/0x20 @ 1
[ 34.742312] regulator: core version 0.5
[ 34.746226] initcall regulator_init+0x0/0x20 returned 0 after 3906 usecs
[ 34.752973] calling cpufreq_core_init+0x0/0x72 @ 1
[ 34.757915] initcall cpufreq_core_init+0x0/0x72 returned 0 after 0 usecs
[ 34.764674] calling cpuidle_init+0x0/0x2e @ 1
[ 34.769180] initcall cpuidle_init+0x0/0x2e returned 0 after 0 usecs
[ 34.775505] calling sock_init+0x0/0x4f @ 1
[ 34.779786] initcall sock_init+0x0/0x4f returned 0 after 3906 usecs
[ 34.786078] calling net_inuse_init+0x0/0x1b @ 1
[ 34.790760] initcall net_inuse_init+0x0/0x1b returned 0 after 0 usecs
[ 34.797257] calling netpoll_init+0x0/0x2b @ 1
[ 34.801764] initcall netpoll_init+0x0/0x2b returned 0 after 0 usecs
[ 34.808091] calling netlink_proto_init+0x0/0xf8 @ 1
[ 34.813118] NET: Registered protocol family 16
[ 34.817637] initcall netlink_proto_init+0x0/0xf8 returned 0 after 3906 usecs
[ 34.824760] calling bdi_class_init+0x0/0x31 @ 1
[ 34.829449] initcall bdi_class_init+0x0/0x31 returned 0 after 0 usecs
[ 34.835941] calling kobject_uevent_init+0x0/0x49 @ 1
[ 34.841061] initcall kobject_uevent_init+0x0/0x49 returned 0 after 3906 usecs
[ 34.848246] calling pcibus_class_init+0x0/0xf @ 1
[ 34.853103] initcall pcibus_class_init+0x0/0xf returned 0 after 0 usecs
[ 34.859773] calling pci_driver_init+0x0/0xa @ 1
[ 34.864457] initcall pci_driver_init+0x0/0xa returned 0 after 0 usecs
[ 34.870952] calling backlight_class_init+0x0/0x48 @ 1
[ 34.876155] initcall backlight_class_init+0x0/0x48 returned 0 after 0 usecs
[ 34.883173] calling xenbus_init+0x0/0x264 @ 1
[ 34.887751] initcall xenbus_init+0x0/0x264 returned 0 after 3906 usecs
[ 34.894266] calling tty_class_init+0x0/0x2b @ 1
[ 34.898948] initcall tty_class_init+0x0/0x2b returned 0 after 0 usecs
[ 34.905444] calling vtconsole_class_init+0x0/0x9b @ 1
[ 34.910671] initcall vtconsole_class_init+0x0/0x9b returned 0 after 3906 usecs
[ 34.917926] calling spi_init+0x0/0xa7 @ 1
[ 34.922109] initcall spi_init+0x0/0xa7 returned 0 after 3906 usecs
[ 34.928324] calling lguest_devices_init+0x0/0x15e @ 1
[ 34.933524] initcall lguest_devices_init+0x0/0x15e returned 0 after 0 usecs
[ 34.940544] calling amd_postcore_init+0x0/0x62 @ 1
[ 34.945485] initcall amd_postcore_init+0x0/0x62 returned 0 after 0 usecs
[ 34.952244] calling arch_kdebugfs_init+0x0/0x1a @ 1
[ 34.957272] initcall arch_kdebugfs_init+0x0/0x1a returned 0 after 0 usecs
[ 34.964116] calling init_pit_clocksource+0x0/0x92 @ 1
[ 34.969316] initcall init_pit_clocksource+0x0/0x92 returned 0 after 0 usecs
[ 34.976335] calling mtrr_if_init+0x0/0x40 @ 1
[ 34.980843] initcall mtrr_if_init+0x0/0x40 returned 0 after 0 usecs
[ 34.987169] calling ffh_cstate_init+0x0/0x23 @ 1
[ 34.991937] initcall ffh_cstate_init+0x0/0x23 returned 0 after 0 usecs
[ 34.998522] calling acpi_pci_init+0x0/0x4d @ 1
[ 35.003114] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 35.010740] ACPI: bus type pci registered
[ 35.014815] initcall acpi_pci_init+0x0/0x4d returned 0 after 0 usecs
[ 35.021228] calling register_xen_pci_notifier+0x0/0x1b @ 1
[ 35.026862] initcall register_xen_pci_notifier+0x0/0x1b returned 0 after 0 usecs
[ 35.034314] calling setup_vcpu_hotplug_event+0x0/0x1b @ 1
[ 35.039862] initcall setup_vcpu_hotplug_event+0x0/0x1b returned 0 after 0 usecs
[ 35.047226] calling dmi_id_init+0x0/0x2b4 @ 1
[ 35.051750] initcall dmi_id_init+0x0/0x2b4 returned 0 after 0 usecs
[ 35.058060] calling dma_bus_init+0x0/0x2d @ 1
[ 35.062569] initcall dma_bus_init+0x0/0x2d returned 0 after 0 usecs
[ 35.068893] calling dma_channel_table_init+0x0/0xc9 @ 1
[ 35.074271] initcall dma_channel_table_init+0x0/0xc9 returned 0 after 0 usecs
[ 35.081458] calling pci_arch_init+0x0/0x56 @ 1
[ 35.086077] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 35.093158] PCI: MCFG area at e0000000 reserved in E820
[ 35.098444] PCI: Using MMCONFIG for extended config space
[ 35.103904] PCI: Using configuration type 1 for base access
[ 35.109544] initcall pci_arch_init+0x0/0x56 returned 0 after 0 usecs
[ 35.115954] calling topology_init+0x0/0x32 @ 1
[ 35.120581] initcall topology_init+0x0/0x32 returned 0 after 0 usecs
[ 35.126958] calling mtrr_init_finialize+0x0/0x31 @ 1
[ 35.132073] initcall mtrr_init_finialize+0x0/0x31 returned 0 after 0 usecs
[ 35.139005] calling param_sysfs_init+0x0/0x1ee @ 1
[ 35.144303] initcall param_sysfs_init+0x0/0x1ee returned 0 after 3906 usecs
[ 35.151168] calling pm_sysrq_init+0x0/0x12 @ 1
[ 35.155760] initcall pm_sysrq_init+0x0/0x12 returned 0 after 0 usecs
[ 35.162175] calling audit_watch_init+0x0/0x23 @ 1
[ 35.167027] initcall audit_watch_init+0x0/0x23 returned 0 after 0 usecs
[ 35.173700] calling init_slow_work+0x0/0x2b @ 1
[ 35.178380] initcall init_slow_work+0x0/0x2b returned 0 after 0 usecs
[ 35.184879] calling default_bdi_init+0x0/0x92 @ 1
[ 35.189905] initcall default_bdi_init+0x0/0x92 returned 0 after 3906 usecs
[ 35.196686] calling init_bio+0x0/0xa8 @ 1
[ 35.201429] bio: create slab <bio-0> at 0
[ 35.205364] initcall init_bio+0x0/0xa8 returned 0 after 7812 usecs
[ 35.211586] calling fsnotify_init+0x0/0xa @ 1
[ 35.216095] initcall fsnotify_init+0x0/0xa returned 0 after 0 usecs
[ 35.222419] calling fsnotify_notification_init+0x0/0xdc @ 1
[ 35.228141] initcall fsnotify_notification_init+0x0/0xdc returned 0 after 0 usecs
[ 35.235679] calling cryptomgr_init+0x0/0xa @ 1
[ 35.240272] initcall cryptomgr_init+0x0/0xa returned 0 after 0 usecs
[ 35.246686] calling blk_settings_init+0x0/0x19 @ 1
[ 35.251625] initcall blk_settings_init+0x0/0x19 returned 0 after 0 usecs
[ 35.258385] calling blk_ioc_init+0x0/0x22 @ 1
[ 35.262893] initcall blk_ioc_init+0x0/0x22 returned 0 after 0 usecs
[ 35.269218] calling blk_softirq_init+0x0/0x52 @ 1
[ 35.274073] initcall blk_softirq_init+0x0/0x52 returned 0 after 0 usecs
[ 35.280744] calling blk_iopoll_setup+0x0/0x52 @ 1
[ 35.285598] initcall blk_iopoll_setup+0x0/0x52 returned 0 after 0 usecs
[ 35.292273] calling genhd_device_init+0x0/0x5d @ 1
[ 35.297776] initcall genhd_device_init+0x0/0x5d returned 0 after 3906 usecs
[ 35.304643] calling blk_dev_integrity_init+0x0/0x22 @ 1
[ 35.310016] initcall blk_dev_integrity_init+0x0/0x22 returned 0 after 0 usecs
[ 35.317211] calling pci_slot_init+0x0/0x37 @ 1
[ 35.321803] initcall pci_slot_init+0x0/0x37 returned 0 after 0 usecs
[ 35.328216] calling fbmem_init+0x0/0x7c @ 1
[ 35.332557] initcall fbmem_init+0x0/0x7c returned 0 after 0 usecs
[ 35.338701] calling acpi_init+0x0/0x2ce @ 1
[ 35.344056] ERROR: Unable to locate IOAPIC for GSI 9
[ 35.348961] ACPI: EC: Look up EC in DSDT
[ 35.357190] ACPI: BIOS _OSI(Linux) query ignored
[ 35.361943] ACPI: Interpreter enabled
[ 35.365517] ACPI: (supports S0 S4 S5)
[ 35.369243] ACPI: Using IOAPIC for interrupt routing
[ 35.381082] initcall acpi_init+0x0/0x2ce returned 0 after 27343 usecs
[ 35.387429] calling dock_init+0x0/0x79 @ 1
[ 35.391702] ACPI: No dock devices found.
[ 35.395660] initcall dock_init+0x0/0x79 returned 0 after 0 usecs
[ 35.401726] calling acpi_pci_root_init+0x0/0x21 @ 1
[ 35.407317] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 35.412161] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 35.418170] pci 0000:00:00.0: PME# disabled
[ 35.422534] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 35.428570] pci 0000:00:01.0: PME# disabled
[ 35.432934] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 35.438969] pci 0000:00:03.0: PME# disabled
[ 35.443331] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 35.449368] pci 0000:00:04.0: PME# disabled
[ 35.453733] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 35.459768] pci 0000:00:05.0: PME# disabled
[ 35.464132] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 35.470169] pci 0000:00:06.0: PME# disabled
[ 35.474533] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 35.480569] pci 0000:00:07.0: PME# disabled
[ 35.485154] pci 0000:00:16.0: reg 10 64bit mmio: [0xdf0e0000-0xdf0e3fff]
[ 35.491871] pci 0000:00:16.1: reg 10 64bit mmio: [0xdf0e4000-0xdf0e7fff]
[ 35.498648] pci 0000:00:16.2: reg 10 64bit mmio: [0xdf0e8000-0xdf0ebfff]
[ 35.505391] pci 0000:00:16.3: reg 10 64bit mmio: [0xdf0ec000-0xdf0effff]
[ 35.512151] pci 0000:00:16.4: reg 10 64bit mmio: [0xdf0f0000-0xdf0f3fff]
[ 35.518910] pci 0000:00:16.5: reg 10 64bit mmio: [0xdf0f4000-0xdf0f7fff]
[ 35.525672] pci 0000:00:16.6: reg 10 64bit mmio: [0xdf0f8000-0xdf0fbfff]
[ 35.532432] pci 0000:00:16.7: reg 10 64bit mmio: [0xdf0fc000-0xdf0fffff]
[ 35.539221] pci 0000:00:1a.0: reg 20 io port: [0xec40-0xec5f]
[ 35.544994] pci 0000:00:1a.1: reg 20 io port: [0xec60-0xec7f]
[ 35.550807] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0df800-0xdf0dfbff]
[ 35.557534] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 35.563606] pci 0000:00:1a.7: PME# disabled
[ 35.567933] pci 0000:00:1d.0: reg 20 io port: [0xec80-0xec9f]
[ 35.573766] pci 0000:00:1d.1: reg 20 io port: [0xeca0-0xecbf]
[ 35.579580] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0dfc00-0xdf0dffff]
[ 35.586307] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 35.592378] pci 0000:00:1d.7: PME# disabled
[ 35.596814] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 35.604373] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 35.611308] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 35.618933] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 35.626559] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[ 35.634304] pci 0000:01:00.0: reg 10 64bit mmio: [0xd6000000-0xd7ffffff]
[ 35.641028] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 35.647100] pci 0000:01:00.0: PME# disabled
[ 35.651427] pci 0000:01:00.1: reg 10 64bit mmio: [0xd8000000-0xd9ffffff]
[ 35.658188] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 35.664259] pci 0000:01:00.1: PME# disabled
[ 35.668611] pci 0000:00:01.0: bridge 32bit mmio: [0xd6000000-0xd9ffffff]
[ 35.675359] pci 0000:02:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 35.682108] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 35.688179] pci 0000:02:00.0: PME# disabled
[ 35.692505] pci 0000:02:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 35.699266] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 35.705339] pci 0000:02:00.1: PME# disabled
[ 35.709689] pci 0000:00:03.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 35.716391] pci 0000:03:00.0: reg 10 io port: [0xfc00-0xfcff]
[ 35.722159] pci 0000:03:00.0: reg 14 64bit mmio: [0xdf2b0000-0xdf2bffff]
[ 35.728920] pci 0000:03:00.0: reg 1c 64bit mmio: [0xdf2c0000-0xdf2fffff]
[ 35.735680] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xdf100000-0xdf1fffff]
[ 35.742896] pci 0000:03:00.0: supports D1 D2
[ 35.747257] pci 0000:00:04.0: bridge io port: [0xf000-0xffff]
[ 35.753003] pci 0000:00:04.0: bridge 32bit mmio: [0xdf100000-0xdf2fffff]
[ 35.760012] pci 0000:07:03.0: reg 10 32bit mmio pref: [0xd5800000-0xd5ffffff]
[ 35.767056] pci 0000:07:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
[ 35.773818] pci 0000:07:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
[ 35.780599] pci 0000:07:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 35.787511] pci 0000:00:1e.0: transparent bridge
[ 35.792101] pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
[ 35.798862] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd5800000-0xd5ffffff]
[ 35.806091] pci_bus 0000:00: on NUMA node 0
[ 35.810295] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 35.817422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 35.823761] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 35.830170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 35.836583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 35.842999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[ 35.849410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[ 35.855829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:04.0
(XEN) PCI add device 00:05.0
(XEN) PCI add device 00:06.0
(XEN) PCI add device 00:07.0
(XEN) PCI add device 00:14.0
(XEN) PCI add device 00:14.1
(XEN) PCI add device 00:14.2
(XEN) PCI add device 00:16.0
(XEN) PCI add device 00:16.1
(XEN) PCI add device 00:16.2
(XEN) PCI add device 00:16.3
(XEN) PCI add device 00:16.4
(XEN) PCI add device 00:16.5
(XEN) PCI add device 00:16.6
(XEN) PCI add device 00:16.7
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 01:00.0
(XEN) PCI add device 01:00.1
(XEN) PCI add device 02:00.0
(XEN) PCI add device 02:00.1
(XEN) PCI add device 03:00.0
(XEN) PCI add device 07:03.0
[ 35.951404] initcall acpi_pci_root_init+0x0/0x21 returned 0 after 85937 usecs
[ 35.958569] calling acpi_pci_link_init+0x0/0x3b @ 1
[ 35.963707] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 35.970571] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 35.977414] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 35.984260] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 35.991107] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 35.997954] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 36.004798] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 36.012773] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 36.019536] initcall acpi_pci_link_init+0x0/0x3b returned 0 after 35156 usecs
[ 36.026687] calling pnp_init+0x0/0xa @ 1
[ 36.030765] initcall pnp_init+0x0/0xa returned 0 after 0 usecs
[ 36.036653] calling __setup_shutdown_event+0x0/0x22 @ 1
[ 36.042027] initcall __setup_shutdown_event+0x0/0x22 returned 0 after 0 usecs
[ 36.049219] calling xen_pcpu_init+0x0/0x8e @ 1
[ 36.053831] sync cpu 0 get result 1 max_id b
[ 36.058157] sync cpu 1 get result 1 max_id b
[ 36.062491] sync cpu 2 get result 1 max_id b
[ 36.066823] sync cpu 3 get result 1 max_id b
[ 36.071157] sync cpu 4 get result 1 max_id b
[ 36.075491] sync cpu 5 get result 1 max_id b
[ 36.079823] sync cpu 6 get result 1 max_id b
[ 36.084158] sync cpu 7 get result 1 max_id b
[ 36.088494] sync cpu 8 get result 1 max_id b
[ 36.092824] sync cpu 9 get result 1 max_id b
[ 36.097160] sync cpu a get result 1 max_id b
[ 36.101490] sync cpu b get result 1 max_id b
[ 36.105833] initcall xen_pcpu_init+0x0/0x8e returned 1474 after 50781 usecs
[ 36.112831] initcall xen_pcpu_init+0x0/0x8e returned with error code 1474
[ 36.119764] calling xenbus_probe_backend_init+0x0/0x1f @ 1
[ 36.125403] initcall xenbus_probe_backend_init+0x0/0x1f returned 0 after 0 usecs
[ 36.132853] calling xenbus_probe_frontend_init+0x0/0x1f @ 1
[ 36.138574] initcall xenbus_probe_frontend_init+0x0/0x1f returned 0 after 0 usecs
[ 36.146110] calling balloon_init+0x0/0x19a @ 1
[ 36.150703] xen_balloon: Initialising balloon driver with page order 0.
[ 36.157384] initcall balloon_init+0x0/0x19a returned 0 after 0 usecs
[ 36.163790] calling misc_init+0x0/0x95 @ 1
[ 36.168041] initcall misc_init+0x0/0x95 returned 0 after 0 usecs
[ 36.174103] calling vga_arb_device_init+0x0/0x62 @ 1
[ 36.179246] vgaarb: device added: PCI:0000:07:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 36.187361] vgaarb: loaded
[ 36.190135] initcall vga_arb_device_init+0x0/0x62 returned 0 after 0 usecs
[ 36.197070] calling serio_init+0x0/0x6c @ 1
[ 36.201466] initcall serio_init+0x0/0x6c returned 0 after 3906 usecs
[ 36.207816] calling input_init+0x0/0x108 @ 1
[ 36.212242] initcall input_init+0x0/0x108 returned 0 after 0 usecs
[ 36.218477] calling rtc_init+0x0/0x59 @ 1
[ 36.222637] initcall rtc_init+0x0/0x59 returned 0 after 0 usecs
[ 36.228616] calling power_supply_class_init+0x0/0x2b @ 1
[ 36.234078] initcall power_supply_class_init+0x0/0x2b returned 0 after 0 usecs
[ 36.241353] calling hwmon_init+0x0/0xe7 @ 1
[ 36.245692] initcall hwmon_init+0x0/0xe7 returned 0 after 0 usecs
[ 36.251840] calling pci_subsys_init+0x0/0xdc @ 1
[ 36.256606] PCI: Using ACPI for IRQ routing
[ 36.260977] initcall pci_subsys_init+0x0/0xdc returned 0 after 0 usecs
[ 36.267439] calling proto_init+0x0/0xa @ 1
[ 36.271689] initcall proto_init+0x0/0xa returned 0 after 0 usecs
[ 36.277752] calling net_dev_init+0x0/0x139 @ 1
[ 36.282407] initcall net_dev_init+0x0/0x139 returned 0 after 3906 usecs
[ 36.289018] calling neigh_init+0x0/0x65 @ 1
[ 36.293353] initcall neigh_init+0x0/0x65 returned 0 after 0 usecs
[ 36.299506] calling fib_rules_init+0x0/0x93 @ 1
[ 36.304186] initcall fib_rules_init+0x0/0x93 returned 0 after 0 usecs
[ 36.310711] calling pktsched_init+0x0/0xb2 @ 1
[ 36.315306] initcall pktsched_init+0x0/0xb2 returned 0 after 0 usecs
[ 36.321718] calling tc_filter_init+0x0/0x42 @ 1
[ 36.326397] initcall tc_filter_init+0x0/0x42 returned 0 after 0 usecs
[ 36.332897] calling tc_action_init+0x0/0x42 @ 1
[ 36.337577] initcall tc_action_init+0x0/0x42 returned 0 after 0 usecs
[ 36.344076] calling genl_init+0x0/0x73 @ 1
[ 36.348340] initcall genl_init+0x0/0x73 returned 0 after 3906 usecs
[ 36.354651] calling wireless_nlevent_init+0x0/0xa @ 1
[ 36.359851] initcall wireless_nlevent_init+0x0/0xa returned 0 after 0 usecs
[ 36.366869] calling sysctl_init+0x0/0x37 @ 1
[ 36.371289] initcall sysctl_init+0x0/0x37 returned 0 after 0 usecs
[ 36.377529] calling print_all_ICs+0x0/0x4de @ 1
[ 36.382262] initcall print_all_ICs+0x0/0x4de returned 0 after 3906 usecs
[ 36.388968] calling hpet_late_init+0x0/0x16b @ 1
[ 36.393735] initcall hpet_late_init+0x0/0x16b returned -19 after 0 usecs
[ 36.400497] calling init_k8_nbs+0x0/0x1b @ 1
[ 36.404923] initcall init_k8_nbs+0x0/0x1b returned 0 after 0 usecs
[ 36.411157] calling clocksource_done_booting+0x0/0x4b @ 1
[ 36.416703] Switching to clocksource xen
[ 36.421732] initcall clocksource_done_booting+0x0/0x4b returned 0 after 4329 usecs
[ 36.429205] calling rb_init_debugfs+0x0/0x25 @ 1
[ 36.433999] initcall rb_init_debugfs+0x0/0x25 returned 0 after 26 usecs
[ 36.440645] calling tracer_init_debugfs+0x0/0x24d @ 1
[ 36.445949] initcall tracer_init_debugfs+0x0/0x24d returned 0 after 102 usecs
[ 36.453037] calling init_trace_printk_function_export+0x0/0x26 @ 1
[ 36.459367] initcall init_trace_printk_function_export+0x0/0x26 returned 0 after 0 usecs
[ 36.467511] calling event_trace_init+0x0/0x198 @ 1
[ 36.473878] initcall event_trace_init+0x0/0x198 returned 0 after 1393 usecs
[ 36.480745] calling init_pipe_fs+0x0/0x39 @ 1
[ 36.485272] initcall init_pipe_fs+0x0/0x39 returned 0 after 22 usecs
[ 36.491661] calling eventpoll_init+0x0/0xc8 @ 1
[ 36.496346] initcall eventpoll_init+0x0/0xc8 returned 0 after 4 usecs
[ 36.502841] calling anon_inode_init+0x0/0xe5 @ 1
[ 36.507612] initcall anon_inode_init+0x0/0xe5 returned 0 after 3 usecs
[ 36.514196] calling tomoyo_initerface_init+0x0/0x10c @ 1
[ 36.519655] initcall tomoyo_initerface_init+0x0/0x10c returned 0 after 0 usecs
[ 36.526934] calling blk_scsi_ioctl_init+0x0/0x290 @ 1
[ 36.532136] initcall blk_scsi_ioctl_init+0x0/0x290 returned 0 after 0 usecs
[ 36.539154] calling acpi_event_init+0x0/0x42 @ 1
[ 36.543938] initcall acpi_event_init+0x0/0x42 returned 0 after 16 usecs
[ 36.550594] calling pnpacpi_init+0x0/0x77 @ 1
[ 36.555099] pnp: PnP ACPI init
[ 36.558238] ACPI: bus type pnp registered
[ 36.562800] xen: registering gsi 13 triggering 1 polarity 0
[ 36.568277] xen_allocate_pirq: returning irq 13 for gsi 13
[ 36.573823] xen: --> irq=13
(XEN) IOAPIC[0]: Set PCI routing entry (0-13 -> 0x78 -> IRQ 13 Mode:0 Active:0)
[ 36.583925] xen: registering gsi 8 triggering 1 polarity 0
[ 36.589315] xen_allocate_pirq: returning irq 8 for gsi 8
[ 36.594691] xen: --> irq=8
(XEN) IOAPIC[0]: Set PCI routing entry (0-8 -> 0x50 -> IRQ 8 Mode:0 Active:0)
[ 36.604788] xen: registering gsi 4 triggering 1 polarity 0
[ 36.610179] xen_allocate_pirq: returning irq 4 for gsi 4
[ 36.615553] xen: --> irq=4
[ 36.618332] Already setup the GSI :4
[ 36.622507] xen: registering gsi 3 triggering 1 polarity 0
[ 36.627898] xen_allocate_pirq: returning irq 3 for gsi 3
[ 36.633271] xen: --> irq=3
(XEN) IOAPIC[0]: Set PCI routing entry (0-3 -> 0x30 -> IRQ 3 Mode:0 Active:0)
[ 36.646253] pnp: PnP ACPI: found 12 devices
[ 36.650343] ACPI: ACPI bus type pnp unregistered
[ 36.655025] initcall pnpacpi_init+0x0/0x77 returned 0 after 97582 usecs
[ 36.661697] calling pnpbios_init+0x0/0x334 @ 1
[ 36.666291] PnPBIOS: Disabled
[ 36.669323] initcall pnpbios_init+0x0/0x334 returned -19 after 2961 usecs
[ 36.676170] calling pnp_system_init+0x0/0xa @ 1
[ 36.680872] system 00:07: ioport range 0x800-0x87f has been reserved
[ 36.687263] system 00:07: ioport range 0x880-0x8ff could not be reserved
[ 36.694023] system 00:07: ioport range 0x900-0x91f has been reserved
[ 36.700436] system 00:07: ioport range 0x920-0x923 has been reserved
[ 36.706848] system 00:07: ioport range 0x924-0x924 has been reserved
[ 36.713261] system 00:07: ioport range 0xc00-0xc7f has been reserved
[ 36.719675] system 00:07: ioport range 0xca0-0xca7 has been reserved
[ 36.726091] system 00:07: ioport range 0xca9-0xcab has been reserved
[ 36.732501] system 00:07: ioport range 0xcad-0xcaf has been reserved
[ 36.738925] system 00:08: ioport range 0xca8-0xca8 has been reserved
[ 36.745328] system 00:08: ioport range 0xcac-0xcac has been reserved
[ 36.751750] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 36.758943] system 00:0b: iomem range 0xfed90000-0xfed91fff has been reserved
[ 36.766141] initcall pnp_system_init+0x0/0xa returned 0 after 83291 usecs
[ 36.772974] calling pcistub_init+0x0/0x196 @ 1
[ 36.777758] initcall pcistub_init+0x0/0x196 returned 0 after 183 usecs
[ 36.784188] calling chr_dev_init+0x0/0x9d @ 1
[ 36.788826] initcall chr_dev_init+0x0/0x9d returned 0 after 126 usecs
[ 36.795195] calling firmware_class_init+0x0/0x5b @ 1
[ 36.800313] initcall firmware_class_init+0x0/0x5b returned 0 after 3 usecs
[ 36.807241] calling cpufreq_gov_performance_init+0x0/0xa @ 1
[ 36.813049] initcall cpufreq_gov_performance_init+0x0/0xa returned 0 after 0 usecs
[ 36.820676] calling cpufreq_gov_dbs_init+0x0/0x9a @ 1
[ 36.826598] initcall cpufreq_gov_dbs_init+0x0/0x9a returned 0 after 675 usecs
[ 36.833637] calling init_acpi_pm_clocksource+0x0/0x1a7 @ 1
[ 36.842613] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 36.849130] initcall init_acpi_pm_clocksource+0x0/0x1a7 returned -19 after 9627 usecs
[ 36.857019] calling pcibios_assign_resources+0x0/0x7d @ 1
[ 36.862754] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 36.868578] pci 0000:00:01.0: IO window: disabled
[ 36.873522] pci 0000:00:01.0: MEM window: 0xd6000000-0xd9ffffff
[ 36.879675] pci 0000:00:01.0: PREFETCH window: disabled
[ 36.885137] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 36.891111] pci 0000:00:03.0: IO window: disabled
[ 36.896054] pci 0000:00:03.0: MEM window: 0xda000000-0xddffffff
[ 36.902207] pci 0000:00:03.0: PREFETCH window: disabled
[ 36.907670] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[ 36.913645] pci 0000:00:04.0: IO window: 0xf000-0xffff
[ 36.919021] pci 0000:00:04.0: MEM window: 0xdf100000-0xdf2fffff
[ 36.925172] pci 0000:00:04.0: PREFETCH window: disabled
[ 36.930635] pci 0000:00:05.0: PCI bridge, secondary bus 0000:04
[ 36.936609] pci 0000:00:05.0: IO window: disabled
[ 36.941554] pci 0000:00:05.0: MEM window: disabled
[ 36.946578] pci 0000:00:05.0: PREFETCH window: disabled
[ 36.952041] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
[ 36.958015] pci 0000:00:06.0: IO window: disabled
[ 36.962959] pci 0000:00:06.0: MEM window: disabled
[ 36.967985] pci 0000:00:06.0: PREFETCH window: disabled
[ 36.973447] pci 0000:00:07.0: PCI bridge, secondary bus 0000:06
[ 36.979421] pci 0000:00:07.0: IO window: disabled
[ 36.984365] pci 0000:00:07.0: MEM window: disabled
[ 36.989390] pci 0000:00:07.0: PREFETCH window: disabled
[ 36.994868] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[ 37.000828] pci 0000:00:1e.0: IO window: disabled
[ 37.005772] pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff
[ 37.011923] pci 0000:00:1e.0: PREFETCH window: 0x000000d5800000-0x000000d5ffffff
[ 37.019562] xen: registering gsi 53 triggering 0 polarity 1
[ 37.025192] xen: --> irq=53
(XEN) IOAPIC[1]: Set PCI routing entry (1-21 -> 0xa0 -> IRQ 53 Mode:1 Active:1)
[ 37.035067] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 37.041824] pci 0000:00:01.0: setting latency timer to 64
[ 37.047290] xen: registering gsi 53 triggering 0 polarity 1
[ 37.052912] xen_allocate_pirq: returning irq 53 for gsi 53
[ 37.058458] xen: --> irq=53
[ 37.061328] Already setup the GSI :53
[ 37.065046] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 37.071810] pci 0000:00:03.0: setting latency timer to 64
[ 37.077273] xen: registering gsi 53 triggering 0 polarity 1
[ 37.082900] xen_allocate_pirq: returning irq 53 for gsi 53
[ 37.088444] xen: --> irq=53
[ 37.091311] Already setup the GSI :53
[ 37.095032] pci 0000:00:04.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 37.101795] pci 0000:00:04.0: setting latency timer to 64
[ 37.107260] xen: registering gsi 53 triggering 0 polarity 1
[ 37.112884] xen_allocate_pirq: returning irq 53 for gsi 53
[ 37.118431] xen: --> irq=53
[ 37.121296] Already setup the GSI :53
[ 37.125018] pci 0000:00:05.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 37.131780] pci 0000:00:05.0: setting latency timer to 64
[ 37.137247] xen: registering gsi 53 triggering 0 polarity 1
[ 37.142870] xen_allocate_pirq: returning irq 53 for gsi 53
[ 37.148419] xen: --> irq=53
[ 37.151284] Already setup the GSI :53
[ 37.155004] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 37.161766] pci 0000:00:06.0: setting latency timer to 64
[ 37.167231] xen: registering gsi 53 triggering 0 polarity 1
[ 37.172858] xen_allocate_pirq: returning irq 53 for gsi 53
[ 37.178403] xen: --> irq=53
[ 37.181270] Already setup the GSI :53
[ 37.184989] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 37.191754] pci 0000:00:07.0: setting latency timer to 64
[ 37.197216] pci 0000:00:1e.0: setting latency timer to 64
[ 37.202673] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 37.208215] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 37.215148] pci_bus 0000:01: resource 1 mem: [0xd6000000-0xd9ffffff]
[ 37.221562] pci_bus 0000:02: resource 1 mem: [0xda000000-0xddffffff]
[ 37.227974] pci_bus 0000:03: resource 0 io: [0xf000-0xffff]
[ 37.233694] pci_bus 0000:03: resource 1 mem: [0xdf100000-0xdf2fffff]
[ 37.240108] pci_bus 0000:07: resource 1 mem: [0xde000000-0xdeffffff]
[ 37.246520] pci_bus 0000:07: resource 2 pref mem [0xd5800000-0xd5ffffff]
[ 37.253280] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
[ 37.258826] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 37.265764] initcall pcibios_assign_resources+0x0/0x7d returned 0 after 393750 usecs
[ 37.273561] calling sysctl_core_init+0x0/0x28 @ 1
[ 37.278437] initcall sysctl_core_init+0x0/0x28 returned 0 after 23 usecs
[ 37.285173] calling inet_init+0x0/0x1c5 @ 1
[ 37.289525] NET: Registered protocol family 2
[ 37.294010] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 37.301316] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 37.308833] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 37.315444] TCP: Hash tables configured (established 131072 bind 65536)
[ 37.322024] TCP reno registered
[ 37.325291] initcall inet_init+0x0/0x1c5 returned 0 after 34944 usecs
[ 37.331765] calling af_unix_init+0x0/0x41 @ 1
[ 37.336271] NET: Registered protocol family 1
[ 37.340696] initcall af_unix_init+0x0/0x41 returned 0 after 4321 usecs
[ 37.347277] calling pci_apply_final_quirks+0x0/0x28 @ 1
[ 37.366763] pci 0000:07:03.0: Boot video device
[ 37.371201] initcall pci_apply_final_quirks+0x0/0x28 returned 0 after 18116 usecs
[ 37.378741] calling populate_rootfs+0x0/0xf3 @ 1
[ 37.383567] Unpacking initramfs...
[ 37.434158] Freeing initrd memory: 23356k freed
[ 37.443573] initcall populate_rootfs+0x0/0xf3 returned 0 after 58651 usecs
[ 37.450354] calling pci_iommu_init+0x0/0x32 @ 1
[ 37.455033] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 37.461533] DMA: Placing 64MB software IO TLB between c37c6000 - c77c6000
[ 37.468378] DMA: software IO TLB at phys 0x37c6000 - 0x77c6000
[ 37.474272] initcall pci_iommu_init+0x0/0x32 returned 0 after 18787 usecs
[ 37.481118] calling i8259A_init_sysfs+0x0/0x19 @ 1
[ 37.486400] initcall i8259A_init_sysfs+0x0/0x19 returned 0 after 331 usecs
[ 37.493178] calling sbf_init+0x0/0xd3 @ 1
[ 37.497341] initcall sbf_init+0x0/0xd3 returned 0 after 0 usecs
[ 37.503317] calling i8237A_init_sysfs+0x0/0x19 @ 1
[ 37.508263] initcall i8237A_init_sysfs+0x0/0x19 returned 0 after 5 usecs
[ 37.515018] calling add_rtc_cmos+0x0/0x8d @ 1
[ 37.519526] initcall add_rtc_cmos+0x0/0x8d returned 0 after 2 usecs
[ 37.525852] calling cache_sysfs_init+0x0/0x51 @ 1
[ 37.531369] initcall cache_sysfs_init+0x0/0x51 returned 0 after 648 usecs
[ 37.538060] calling mce_init_device+0x0/0xd2 @ 1
[ 37.543400] initcall mce_init_device+0x0/0xd2 returned 0 after 559 usecs
[ 37.550008] calling threshold_init_device+0x0/0x70 @ 1
[ 37.555292] initcall threshold_init_device+0x0/0x70 returned 0 after 0 usecs
[ 37.562398] calling thermal_throttle_init_device+0x0/0x79 @ 1
[ 37.568291] initcall thermal_throttle_init_device+0x0/0x79 returned 0 after 0 usecs
[ 37.576006] calling ioapic_init_sysfs+0x0/0x7d @ 1
[ 37.580953] initcall ioapic_init_sysfs+0x0/0x7d returned 0 after 8 usecs
[ 37.587704] calling init_vmi_clocksource+0x0/0xde @ 1
[ 37.592906] initcall init_vmi_clocksource+0x0/0xde returned 0 after 0 usecs
[ 37.599923] calling add_pcspkr+0x0/0x20 @ 1
[ 37.604276] initcall add_pcspkr+0x0/0x20 returned 0 after 19 usecs
[ 37.610499] calling init_sched_debug_procfs+0x0/0x23 @ 1
[ 37.615961] initcall init_sched_debug_procfs+0x0/0x23 returned 0 after 4 usecs
[ 37.623236] calling proc_execdomains_init+0x0/0x1a @ 1
[ 37.628524] initcall proc_execdomains_init+0x0/0x1a returned 0 after 0 usecs
[ 37.635629] calling ioresources_init+0x0/0x30 @ 1
[ 37.640484] initcall ioresources_init+0x0/0x30 returned 0 after 1 usecs
[ 37.647157] calling uid_cache_init+0x0/0x76 @ 1
[ 37.651847] initcall uid_cache_init+0x0/0x76 returned 0 after 11 usecs
[ 37.658422] calling init_posix_timers+0x0/0x149 @ 1
[ 37.663453] initcall init_posix_timers+0x0/0x149 returned 0 after 4 usecs
[ 37.670295] calling init_posix_cpu_timers+0x0/0xc2 @ 1
[ 37.675582] initcall init_posix_cpu_timers+0x0/0xc2 returned 0 after 0 usecs
[ 37.682688] calling nsproxy_cache_init+0x0/0x25 @ 1
[ 37.687716] initcall nsproxy_cache_init+0x0/0x25 returned 0 after 1 usecs
[ 37.694563] calling create_proc_profile+0x0/0x184 @ 1
[ 37.699762] initcall create_proc_profile+0x0/0x184 returned 0 after 0 usecs
[ 37.706780] calling timekeeping_init_device+0x0/0x19 @ 1
[ 37.712247] initcall timekeeping_init_device+0x0/0x19 returned 0 after 6 usecs
[ 37.719519] calling init_clocksource_sysfs+0x0/0x3f @ 1
[ 37.724900] initcall init_clocksource_sysfs+0x0/0x3f returned 0 after 6 usecs
[ 37.732086] calling init_timer_list_procfs+0x0/0x23 @ 1
[ 37.737460] initcall init_timer_list_procfs+0x0/0x23 returned 0 after 0 usecs
[ 37.744652] calling init_tstats_procfs+0x0/0x23 @ 1
[ 37.749680] initcall init_tstats_procfs+0x0/0x23 returned 0 after 0 usecs
[ 37.756525] calling futex_init+0x0/0x7d @ 1
[ 37.760874] initcall futex_init+0x0/0x7d returned 0 after 15 usecs
[ 37.767098] calling proc_dma_init+0x0/0x1a @ 1
[ 37.771693] initcall proc_dma_init+0x0/0x1a returned 0 after 0 usecs
[ 37.778104] calling proc_modules_init+0x0/0x1a @ 1
[ 37.783046] initcall proc_modules_init+0x0/0x1a returned 0 after 0 usecs
[ 37.789804] calling kallsyms_init+0x0/0x1d @ 1
[ 37.794398] initcall kallsyms_init+0x0/0x1d returned 0 after 0 usecs
[ 37.800811] calling snapshot_device_init+0x0/0xa @ 1
[ 37.805936] initcall snapshot_device_init+0x0/0xa returned 0 after 10 usecs
[ 37.812944] calling crash_save_vmcoreinfo_init+0x0/0x344 @ 1
[ 37.818767] initcall crash_save_vmcoreinfo_init+0x0/0x344 returned 0 after 15 usecs
[ 37.826495] calling crash_notes_memory_init+0x0/0x2d @ 1
[ 37.831957] initcall crash_notes_memory_init+0x0/0x2d returned 0 after 4 usecs
[ 37.839232] calling pid_namespaces_init+0x0/0x25 @ 1
[ 37.844347] initcall pid_namespaces_init+0x0/0x25 returned 0 after 0 usecs
[ 37.851278] calling audit_init+0x0/0x10a @ 1
[ 37.855699] audit: initializing netlink socket (disabled)
[ 37.861176] type=2000 audit(1289932836.618:1): initialized
[ 37.866706] initcall audit_init+0x0/0x10a returned 0 after 10749 usecs
[ 37.873291] calling audit_tree_init+0x0/0x37 @ 1
[ 37.878059] initcall audit_tree_init+0x0/0x37 returned 0 after 0 usecs
[ 37.884644] calling init_kprobes+0x0/0x13b @ 1
[ 37.891827] initcall init_kprobes+0x0/0x13b returned 0 after 2527 usecs
[ 37.898344] calling hung_task_init+0x0/0x3c @ 1
[ 37.903111] initcall hung_task_init+0x0/0x3c returned 0 after 81 usecs
[ 37.909611] calling utsname_sysctl_init+0x0/0xd @ 1
[ 37.914652] initcall utsname_sysctl_init+0x0/0xd returned 0 after 14 usecs
[ 37.921572] calling init_tracepoints+0x0/0xa @ 1
[ 37.926338] initcall init_tracepoints+0x0/0xa returned 0 after 0 usecs
[ 37.932923] calling init_events+0x0/0x53 @ 1
[ 37.937344] initcall init_events+0x0/0x53 returned 0 after 1 usecs
[ 37.943583] calling init_sched_switch_trace+0x0/0xa @ 1
[ 37.948957] initcall init_sched_switch_trace+0x0/0xa returned 0 after 1 usecs
[ 37.956148] calling init_blk_tracer+0x0/0x47 @ 1
[ 37.960917] initcall init_blk_tracer+0x0/0x47 returned 0 after 0 usecs
[ 37.967502] calling perf_event_sysfs_init+0x0/0xf @ 1
[ 37.972704] initcall perf_event_sysfs_init+0x0/0xf returned 0 after 2 usecs
[ 37.979721] calling init_per_zone_wmark_min+0x0/0x55 @ 1
[ 37.985257] initcall init_per_zone_wmark_min+0x0/0x55 returned 0 after 73 usecs
[ 37.992549] calling kswapd_init+0x0/0x19 @ 1
[ 37.997036] initcall kswapd_init+0x0/0x19 returned 0 after 65 usecs
[ 38.003297] calling setup_vmstat+0x0/0xa4 @ 1
[ 38.007827] initcall setup_vmstat+0x0/0xa4 returned 0 after 25 usecs
[ 38.014215] calling mm_sysfs_init+0x0/0x1e @ 1
[ 38.018810] initcall mm_sysfs_init+0x0/0x1e returned 0 after 2 usecs
[ 38.025221] calling proc_vmalloc_init+0x0/0x1d @ 1
[ 38.030162] initcall proc_vmalloc_init+0x0/0x1d returned 0 after 0 usecs
[ 38.036920] calling init_emergency_pool+0x0/0x70 @ 1
[ 38.042042] highmem bounce pool size: 64 pages
[ 38.046541] initcall init_emergency_pool+0x0/0x70 returned 0 after 4401 usecs
[ 38.053733] calling procswaps_init+0x0/0x1a @ 1
[ 38.058416] initcall procswaps_init+0x0/0x1a returned 0 after 0 usecs
[ 38.064913] calling hugetlb_init+0x0/0x2cc @ 1
[ 38.069507] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 38.075924] initcall hugetlb_init+0x0/0x2cc returned 0 after 6266 usecs
[ 38.082592] calling ksm_init+0x0/0x15a @ 1
[ 38.086920] initcall ksm_init+0x0/0x15a returned 0 after 78 usecs
[ 38.092991] calling slab_proc_init+0x0/0x1d @ 1
[ 38.097673] initcall slab_proc_init+0x0/0x1d returned 0 after 1 usecs
[ 38.104171] calling slab_sysfs_init+0x0/0xaf @ 1
[ 38.110167] initcall slab_sysfs_init+0x0/0xaf returned 0 after 1199 usecs
[ 38.116858] calling fasync_init+0x0/0x22 @ 1
[ 38.121281] initcall fasync_init+0x0/0x22 returned 0 after 3 usecs
[ 38.127518] calling proc_filesystems_init+0x0/0x1a @ 1
[ 38.132808] initcall proc_filesystems_init+0x0/0x1a returned 0 after 1 usecs
[ 38.139911] calling dnotify_init+0x0/0x6b @ 1
[ 38.144423] initcall dnotify_init+0x0/0x6b returned 0 after 5 usecs
[ 38.150744] calling inotify_setup+0x0/0xd @ 1
[ 38.155250] initcall inotify_setup+0x0/0xd returned 0 after 0 usecs
[ 38.161576] calling inotify_user_setup+0x0/0x9d @ 1
[ 38.166617] initcall inotify_user_setup+0x0/0x9d returned 0 after 13 usecs
[ 38.173536] calling aio_setup+0x0/0x5f @ 1
[ 38.178541] initcall aio_setup+0x0/0x5f returned 0 after 739 usecs
[ 38.184630] calling proc_locks_init+0x0/0x1a @ 1
[ 38.189397] initcall proc_locks_init+0x0/0x1a returned 0 after 1 usecs
[ 38.195982] calling dquot_init+0x0/0xdd @ 1
[ 38.200315] VFS: Disk quotas dquot_6.5.2
[ 38.204332] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 38.210893] initcall dquot_init+0x0/0xdd returned 0 after 10328 usecs
[ 38.217389] calling proc_cmdline_init+0x0/0x1a @ 1
[ 38.222330] initcall proc_cmdline_init+0x0/0x1a returned 0 after 1 usecs
[ 38.229088] calling proc_cpuinfo_init+0x0/0x1a @ 1
[ 38.234028] initcall proc_cpuinfo_init+0x0/0x1a returned 0 after 0 usecs
[ 38.240791] calling proc_devices_init+0x0/0x1a @ 1
[ 38.245729] initcall proc_devices_init+0x0/0x1a returned 0 after 1 usecs
[ 38.252487] calling proc_interrupts_init+0x0/0x1a @ 1
[ 38.257688] initcall proc_interrupts_init+0x0/0x1a returned 0 after 0 usecs
[ 38.264707] calling proc_loadavg_init+0x0/0x1a @ 1
[ 38.269647] initcall proc_loadavg_init+0x0/0x1a returned 0 after 0 usecs
[ 38.276408] calling proc_meminfo_init+0x0/0x1a @ 1
[ 38.281348] initcall proc_meminfo_init+0x0/0x1a returned 0 after 0 usecs
[ 38.288107] calling proc_stat_init+0x0/0x1a @ 1
[ 38.292789] initcall proc_stat_init+0x0/0x1a returned 0 after 0 usecs
[ 38.299286] calling proc_uptime_init+0x0/0x1a @ 1
[ 38.304140] initcall proc_uptime_init+0x0/0x1a returned 0 after 1 usecs
[ 38.310813] calling proc_version_init+0x0/0x1a @ 1
[ 38.315753] initcall proc_version_init+0x0/0x1a returned 0 after 0 usecs
[ 38.322512] calling proc_softirqs_init+0x0/0x1a @ 1
[ 38.327540] initcall proc_softirqs_init+0x0/0x1a returned 0 after 0 usecs
[ 38.334387] calling proc_kcore_init+0x0/0x9e @ 1
[ 38.339153] initcall proc_kcore_init+0x0/0x9e returned 0 after 2 usecs
[ 38.345738] calling proc_kmsg_init+0x0/0x1d @ 1
[ 38.350418] initcall proc_kmsg_init+0x0/0x1d returned 0 after 0 usecs
[ 38.356918] calling proc_page_init+0x0/0x36 @ 1
[ 38.361599] initcall proc_page_init+0x0/0x36 returned 0 after 1 usecs
[ 38.368098] calling init_devpts_fs+0x0/0x39 @ 1
[ 38.372784] initcall init_devpts_fs+0x0/0x39 returned 0 after 5 usecs
[ 38.379277] calling init_ramfs_fs+0x0/0xa @ 1
[ 38.383784] initcall init_ramfs_fs+0x0/0xa returned 0 after 0 usecs
[ 38.390110] calling init_hugetlbfs_fs+0x0/0x7c @ 1
[ 38.395102] initcall init_hugetlbfs_fs+0x0/0x7c returned 0 after 48 usecs
[ 38.401897] calling ipc_init+0x0/0x1c @ 1
[ 38.406057] msgmni has been set to 1411
[ 38.409959] initcall ipc_init+0x0/0x1c returned 0 after 3811 usecs
[ 38.416196] calling ipc_sysctl_init+0x0/0xd @ 1
[ 38.420892] initcall ipc_sysctl_init+0x0/0xd returned 0 after 14 usecs
[ 38.427462] calling init_mqueue_fs+0x0/0x93 @ 1
[ 38.432196] initcall init_mqueue_fs+0x0/0x93 returned 0 after 51 usecs
[ 38.438730] calling key_proc_init+0x0/0x4a @ 1
[ 38.443336] initcall key_proc_init+0x0/0x4a returned 0 after 14 usecs
[ 38.449822] calling selinux_nf_ip_init+0x0/0x50 @ 1
[ 38.454851] initcall selinux_nf_ip_init+0x0/0x50 returned 0 after 0 usecs
[ 38.461695] calling init_sel_fs+0x0/0x53 @ 1
[ 38.466115] initcall init_sel_fs+0x0/0x53 returned 0 after 0 usecs
[ 38.472354] calling selnl_init+0x0/0x42 @ 1
[ 38.476696] initcall selnl_init+0x0/0x42 returned 0 after 8 usecs
[ 38.482841] calling sel_netif_init+0x0/0x53 @ 1
[ 38.487521] initcall sel_netif_init+0x0/0x53 returned 0 after 0 usecs
[ 38.494020] calling sel_netnode_init+0x0/0x5d @ 1
[ 38.498875] initcall sel_netnode_init+0x0/0x5d returned 0 after 0 usecs
[ 38.505547] calling sel_netport_init+0x0/0x5d @ 1
[ 38.510400] initcall sel_netport_init+0x0/0x5d returned 0 after 0 usecs
[ 38.517074] calling aurule_init+0x0/0x2c @ 1
[ 38.521494] initcall aurule_init+0x0/0x2c returned 0 after 0 usecs
[ 38.527732] calling crypto_wq_init+0x0/0x25 @ 1
[ 38.533198] initcall crypto_wq_init+0x0/0x25 returned 0 after 765 usecs
[ 38.539719] calling crypto_algapi_init+0x0/0x8 @ 1
[ 38.544662] initcall crypto_algapi_init+0x0/0x8 returned 0 after 4 usecs
[ 38.551418] calling skcipher_module_init+0x0/0x25 @ 1
[ 38.556618] initcall skcipher_module_init+0x0/0x25 returned 0 after 0 usecs
[ 38.563638] calling chainiv_module_init+0x0/0xa @ 1
[ 38.568665] initcall chainiv_module_init+0x0/0xa returned 0 after 1 usecs
[ 38.575510] calling eseqiv_module_init+0x0/0xa @ 1
[ 38.580449] initcall eseqiv_module_init+0x0/0xa returned 0 after 0 usecs
[ 38.587210] calling md5_mod_init+0x0/0xa @ 1
[ 38.591766] initcall md5_mod_init+0x0/0xa returned 0 after 132 usecs
[ 38.598042] calling krng_mod_init+0x0/0xa @ 1
[ 38.602611] alg: No test for stdrng (krng)
[ 38.606731] initcall krng_mod_init+0x0/0xa returned 0 after 4082 usecs
[ 38.613298] calling proc_genhd_init+0x0/0x30 @ 1
[ 38.618064] initcall proc_genhd_init+0x0/0x30 returned 0 after 1 usecs
[ 38.624649] calling bsg_init+0x0/0x107 @ 1
[ 38.628920] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 38.636349] initcall bsg_init+0x0/0x107 returned 0 after 7278 usecs
[ 38.642675] calling noop_init+0x0/0xd @ 1
[ 38.646834] io scheduler noop registered
[ 38.650821] initcall noop_init+0x0/0xd returned 0 after 3893 usecs
[ 38.657061] calling as_init+0x0/0xd @ 1
[ 38.661047] io scheduler anticipatory registered
[ 38.665728] initcall as_init+0x0/0xd returned 0 after 4570 usecs
[ 38.671794] calling deadline_init+0x0/0xd @ 1
[ 38.676300] io scheduler deadline registered (default)
[ 38.681500] initcall deadline_init+0x0/0xd returned 0 after 5078 usecs
[ 38.688088] calling cfq_init+0x0/0x84 @ 1
[ 38.692282] io scheduler cfq registered
[ 38.696147] initcall cfq_init+0x0/0x84 returned 0 after 3809 usecs
[ 38.702386] calling percpu_counter_startup+0x0/0x2c @ 1
[ 38.707760] initcall percpu_counter_startup+0x0/0x2c returned 0 after 0 usecs
[ 38.714952] calling audit_classes_init+0x0/0x4b @ 1
[ 38.719983] initcall audit_classes_init+0x0/0x4b returned 0 after 1 usecs
[ 38.726825] calling pci_proc_init+0x0/0x55 @ 1
[ 38.731530] initcall pci_proc_init+0x0/0x55 returned 0 after 108 usecs
[ 38.738005] calling pcie_portdrv_init+0x0/0x3b @ 1
[ 38.743108] pcieport 0000:00:01.0: setting latency timer to 64
[ 38.749071] pcieport 0000:00:03.0: setting latency timer to 64
[ 38.755029] pcieport 0000:00:04.0: setting latency timer to 64
[ 38.760996] pcieport 0000:00:05.0: setting latency timer to 64
[ 38.766955] pcieport 0000:00:06.0: setting latency timer to 64
[ 38.772914] pcieport 0000:00:07.0: setting latency timer to 64
[ 38.778767] initcall pcie_portdrv_init+0x0/0x3b returned 0 after 34981 usecs
[ 38.785759] calling aer_service_init+0x0/0x22 @ 1
[ 38.790885] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 38.796697] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 38.802586] aer 0000:00:04.0:pcie02: service driver aer loaded
[ 38.808479] aer 0000:00:05.0:pcie02: service driver aer loaded
[ 38.814372] aer 0000:00:06.0:pcie02: service driver aer loaded
[ 38.820265] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 38.826134] initcall aer_service_init+0x0/0x22 returned 0 after 34686 usecs
[ 38.833138] calling pcifront_init+0x0/0x42 @ 1
[ 38.837740] initcall pcifront_init+0x0/0x42 returned 0 after 8 usecs
[ 38.844145] calling fb_console_init+0x0/0xf6 @ 1
[ 38.848920] initcall fb_console_init+0x0/0xf6 returned 0 after 9 usecs
[ 38.855498] calling xenfb_init+0x0/0x4b @ 1
[ 38.859831] initcall xenfb_init+0x0/0x4b returned -19 after 0 usecs
[ 38.866156] calling vesafb_init+0x0/0x1f3 @ 1
[ 38.870687] initcall vesafb_init+0x0/0x1f3 returned 0 after 23 usecs
[ 38.877076] calling efifb_init+0x0/0x1a2 @ 1
[ 38.881502] initcall efifb_init+0x0/0x1a2 returned -19 after 5 usecs
[ 38.887911] calling acpi_reserve_resources+0x0/0xc4 @ 1
[ 38.893286] initcall acpi_reserve_resources+0x0/0xc4 returned 0 after 2 usecs
[ 38.900476] calling irqrouter_init_sysfs+0x0/0x2d @ 1
[ 38.905683] initcall irqrouter_init_sysfs+0x0/0x2d returned 0 after 6 usecs
[ 38.912697] calling pnpbios_thread_init+0x0/0x47 @ 1
[ 38.917867] initcall pnpbios_thread_init+0x0/0x47 returned 0 after 53 usecs
[ 38.924829] calling isapnp_init+0x0/0xccb @ 1
[ 38.929341] isapnp: Scanning for PnP cards...
[ 39.287652] isapnp: No Plug & Play device found
[ 39.292090] initcall isapnp_init+0x0/0xccb returned 0 after 354251 usecs
[ 39.298850] calling xenbus_probe_initcall+0x0/0x33 @ 1
[ 39.304136] initcall xenbus_probe_initcall+0x0/0x33 returned 0 after 0 usecs
[ 39.311243] calling gntdev_init+0x0/0x2e @ 1
[ 39.315701] initcall gntdev_init+0x0/0x2e returned 0 after 35 usecs
[ 39.321988] calling pciback_init+0x0/0x109 @ 1
[ 39.327230] initcall pciback_init+0x0/0x109 returned 0 after 631 usecs
[ 39.333662] calling blkif_init+0x0/0x12d @ 1
[ 39.339941] initcall blkif_init+0x0/0x12d returned 0 after 1815 usecs
[ 39.346286] calling netback_init+0x0/0x335 @ 1
[ 39.358465] registering netback
[ 39.361573] initcall netback_init+0x0/0x335 returned 0 after 10438 usecs
[ 39.368281] calling hypervisor_subsys_init+0x0/0x1d @ 1
[ 39.373651] initcall hypervisor_subsys_init+0x0/0x1d returned 0 after 0 usecs
[ 39.380844] calling hyper_sysfs_init+0x0/0xc0 @ 1
[ 39.385705] initcall hyper_sysfs_init+0x0/0xc0 returned 0 after 6 usecs
[ 39.392371] calling platform_pci_module_init+0x0/0x20 @ 1
[ 39.397918] initcall platform_pci_module_init+0x0/0x20 returned -19 after 0 usecs
[ 39.405461] calling rand_initialize+0x0/0x21 @ 1
[ 39.410235] initcall rand_initialize+0x0/0x21 returned 0 after 11 usecs
[ 39.416897] calling tty_init+0x0/0xd4 @ 1
[ 39.422172] initcall tty_init+0x0/0xd4 returned 0 after 1087 usecs
[ 39.428257] calling pty_init+0x0/0x293 @ 1
[ 39.432552] initcall pty_init+0x0/0x293 returned 0 after 44 usecs
[ 39.438656] calling sysrq_init+0x0/0x1d @ 1
[ 39.442996] initcall sysrq_init+0x0/0x1d returned 0 after 6 usecs
[ 39.449142] calling xen_hvc_init+0x0/0xbd @ 1
[ 39.453886] initcall xen_hvc_init+0x0/0xbd returned 0 after 230 usecs
[ 39.460230] calling init+0x0/0xa @ 1
[ 39.463965] initcall init+0x0/0xa returned 0 after 5 usecs
[ 39.469503] calling hpet_init+0x0/0x53 @ 1
[ 39.473919] hpet_acpi_add: no address or irqs in _CRS
[ 39.478899] initcall hpet_init+0x0/0x53 returned 0 after 5028 usecs
[ 39.485204] calling agp_init+0x0/0x1d @ 1
[ 39.489362] Linux agpgart interface v0.103
[ 39.493523] initcall agp_init+0x0/0x1d returned 0 after 4062 usecs
[ 39.499762] calling agp_ali_init+0x0/0x20 @ 1
[ 39.504280] initcall agp_ali_init+0x0/0x20 returned 0 after 11 usecs
[ 39.510682] calling agp_ati_init+0x0/0x20 @ 1
[ 39.515195] initcall agp_ati_init+0x0/0x20 returned 0 after 5 usecs
[ 39.521515] calling agp_amdk7_init+0x0/0x20 @ 1
[ 39.526202] initcall agp_amdk7_init+0x0/0x20 returned 0 after 6 usecs
[ 39.532695] calling agp_amd64_init+0x0/0x93 @ 1
[ 39.537384] initcall agp_amd64_init+0x0/0x93 returned -19 after 9 usecs
[ 39.544048] calling agp_efficeon_init+0x0/0x35 @ 1
[ 39.548993] initcall agp_efficeon_init+0x0/0x35 returned 0 after 6 usecs
[ 39.555748] calling agp_intel_init+0x0/0x20 @ 1
[ 39.560456] initcall agp_intel_init+0x0/0x20 returned 0 after 26 usecs
[ 39.567013] calling agp_nvidia_init+0x0/0x20 @ 1
[ 39.571787] initcall agp_nvidia_init+0x0/0x20 returned 0 after 6 usecs
[ 39.578366] calling agp_sis_init+0x0/0x20 @ 1
[ 39.582880] initcall agp_sis_init+0x0/0x20 returned 0 after 6 usecs
[ 39.589199] calling agp_serverworks_init+0x0/0x20 @ 1
[ 39.594406] initcall agp_serverworks_init+0x0/0x20 returned 0 after 6 usecs
[ 39.601419] calling agp_via_init+0x0/0x20 @ 1
[ 39.605934] initcall agp_via_init+0x0/0x20 returned 0 after 7 usecs
[ 39.612252] calling serial8250_init+0x0/0x10c @ 1
[ 39.617105] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 39.623593] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 39.629601] initcall serial8250_init+0x0/0x10c returned 0 after 12202 usecs
[ 39.636526] calling serial8250_pnp_init+0x0/0xa @ 1
[ 39.641784] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 39.647325] initcall serial8250_pnp_init+0x0/0xa returned 0 after 5637 usecs
[ 39.654369] calling serial8250_pci_init+0x0/0x11 @ 1
[ 39.659503] initcall serial8250_pci_init+0x0/0x11 returned 0 after 20 usecs
[ 39.666502] calling isa_bus_init+0x0/0x2f @ 1
[ 39.671017] initcall isa_bus_init+0x0/0x2f returned 0 after 9 usecs
[ 39.677335] calling topology_sysfs_init+0x0/0x4d @ 1
[ 39.682500] initcall topology_sysfs_init+0x0/0x4d returned 0 after 51 usecs
[ 39.689468] calling net_olddevs_init+0x0/0x7e @ 1
[ 39.694324] initcall net_olddevs_init+0x0/0x7e returned 0 after 3 usecs
[ 39.700996] calling i8042_init+0x0/0x345 @ 1
[ 39.705437] PNP: No PS/2 controller found. Probing ports directly.
[ 39.714363] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 39.719239] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 39.724386] initcall i8042_init+0x0/0x345 returned 0 after 18526 usecs
[ 39.730934] calling mousedev_init+0x0/0x72 @ 1
[ 39.735558] mice: PS/2 mouse device common for all mice
[ 39.740814] initcall mousedev_init+0x0/0x72 returned 0 after 5163 usecs
[ 39.747486] calling atkbd_init+0x0/0x1b @ 1
[ 39.751833] initcall atkbd_init+0x0/0x1b returned 0 after 13 usecs
[ 39.758059] calling xenkbd_init+0x0/0x4b @ 1
[ 39.762480] initcall xenkbd_init+0x0/0x4b returned -19 after 0 usecs
[ 39.768892] calling cmos_init+0x0/0x5a @ 1
[ 39.773181] rtc_cmos 00:04: RTC can wake from S4
[ 39.777840] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 39.784019] rtc0: alarms up to one day, y3k, 242 bytes nvram
[ 39.789710] initcall cmos_init+0x0/0x5a returned 0 after 16182 usecs
[ 39.796105] calling init_ladder+0x0/0xa @ 1
[ 39.800439] cpuidle: using governor ladder
[ 39.804601] initcall init_ladder+0x0/0xa returned 0 after 4064 usecs
[ 39.811010] calling init_menu+0x0/0xa @ 1
[ 39.815171] cpuidle: using governor menu
[ 39.819159] initcall init_menu+0x0/0xa returned 0 after 3894 usecs
[ 39.825397] calling ledtrig_ide_init+0x0/0x12 @ 1
[ 39.830281] initcall ledtrig_ide_init+0x0/0x12 returned 0 after 0 usecs
[ 39.836953] calling ibft_init+0x0/0x575 @ 1
[ 39.841287] No iBFT detected.
[ 39.844320] initcall ibft_init+0x0/0x575 returned 0 after 2963 usecs
[ 39.850733] calling staging_init+0x0/0x3 @ 1
[ 39.855153] initcall staging_init+0x0/0x3 returned 0 after 0 usecs
[ 39.861392] calling flow_cache_init+0x0/0x13a @ 1
[ 39.866278] initcall flow_cache_init+0x0/0x13a returned 0 after 29 usecs
[ 39.873005] calling llc_init+0x0/0x17 @ 1
[ 39.877167] initcall llc_init+0x0/0x17 returned 0 after 0 usecs
[ 39.883145] calling snap_init+0x0/0x2d @ 1
[ 39.887393] initcall snap_init+0x0/0x2d returned 0 after 0 usecs
[ 39.893458] calling rif_init+0x0/0x68 @ 1
[ 39.897630] initcall rif_init+0x0/0x68 returned 0 after 9 usecs
[ 39.903598] calling blackhole_module_init+0x0/0xa @ 1
[ 39.908799] initcall blackhole_module_init+0x0/0xa returned 0 after 0 usecs
[ 39.915817] calling init_cgroup_cls+0x0/0xa @ 1
[ 39.920498] initcall init_cgroup_cls+0x0/0xa returned 0 after 0 usecs
[ 39.926998] calling sysctl_ipv4_init+0x0/0x3b @ 1
[ 39.932002] initcall sysctl_ipv4_init+0x0/0x3b returned 0 after 147 usecs
[ 39.938697] calling init_syncookies+0x0/0x12 @ 1
[ 39.943486] initcall init_syncookies+0x0/0x12 returned 0 after 21 usecs
[ 39.950140] calling ipv4_netfilter_init+0x0/0xa @ 1
[ 39.955164] initcall ipv4_netfilter_init+0x0/0xa returned 0 after 1 usecs
[ 39.962010] calling cubictcp_register+0x0/0x7d @ 1
[ 39.966951] TCP cubic registered
[ 39.970242] initcall cubictcp_register+0x0/0x7d returned 0 after 3214 usecs
[ 39.977265] calling inet6_init+0x0/0x29c @ 1
[ 39.981833] NET: Registered protocol family 10
[ 39.986533] lo: Disabled Privacy Extensions
[ 39.990792] initcall inet6_init+0x0/0x29c returned 0 after 8896 usecs
[ 39.997136] calling mip6_init+0x0/0xa3 @ 1
[ 40.001383] Mobile IPv6
[ 40.003896] initcall mip6_init+0x0/0xa3 returned 0 after 2453 usecs
[ 40.010223] calling packet_init+0x0/0x35 @ 1
[ 40.014643] NET: Registered protocol family 17
[ 40.019152] initcall packet_init+0x0/0x35 returned 0 after 4402 usecs
[ 40.025649] calling dcbnl_init+0x0/0x2b @ 1
[ 40.029983] initcall dcbnl_init+0x0/0x2b returned 0 after 0 usecs
[ 40.036138] calling mce_debugfs_init+0x0/0x31 @ 1
[ 40.040995] initcall mce_debugfs_init+0x0/0x31 returned 0 after 5 usecs
[ 40.047662] calling severities_debugfs_init+0x0/0x31 @ 1
[ 40.053125] initcall severities_debugfs_init+0x0/0x31 returned 0 after 1 usecs
[ 40.060401] calling hpet_insert_resource+0x0/0x1a @ 1
[ 40.065602] initcall hpet_insert_resource+0x0/0x1a returned 0 after 1 usecs
[ 40.072622] calling update_mp_table+0x0/0x58f @ 1
[ 40.077474] initcall update_mp_table+0x0/0x58f returned 0 after 0 usecs
[ 40.084150] calling lapic_insert_resource+0x0/0x41 @ 1
[ 40.089434] initcall lapic_insert_resource+0x0/0x41 returned -1 after 0 usecs
[ 40.096627] initcall lapic_insert_resource+0x0/0x41 returned with error code -1
[ 40.104080] calling print_ipi_mode+0x0/0x24 @ 1
[ 40.108759] Using IPI No-Shortcut mode
[ 40.112573] initcall print_ipi_mode+0x0/0x24 returned 0 after 3723 usecs
[ 40.119333] calling init_lapic_nmi_sysfs+0x0/0x2d @ 1
[ 40.124533] initcall init_lapic_nmi_sysfs+0x0/0x2d returned 0 after 0 usecs
[ 40.131553] calling io_apic_bug_finalize+0x0/0x16 @ 1
[ 40.136753] initcall io_apic_bug_finalize+0x0/0x16 returned 0 after 0 usecs
[ 40.143774] calling check_early_ioremap_leak+0x0/0x5a @ 1
[ 40.149321] initcall check_early_ioremap_leak+0x0/0x5a returned 0 after 0 usecs
[ 40.156686] calling pat_memtype_list_init+0x0/0x21 @ 1
[ 40.161973] initcall pat_memtype_list_init+0x0/0x21 returned 0 after 1 usecs
[ 40.169079] calling sched_init_debug+0x0/0x1d @ 1
[ 40.173932] initcall sched_init_debug+0x0/0x1d returned 0 after 1 usecs
[ 40.180609] calling init_oops_id+0x0/0x36 @ 1
[ 40.185114] initcall init_oops_id+0x0/0x36 returned 0 after 2 usecs
[ 40.191437] calling disable_boot_consoles+0x0/0x37 @ 1
[ 40.196725] initcall disable_boot_consoles+0x0/0x37 returned 0 after 0 usecs
[ 40.203831] calling pm_qos_power_init+0x0/0xa8 @ 1
[ 40.208805] initcall pm_qos_power_init+0x0/0xa8 returned 0 after 33 usecs
[ 40.215619] calling software_resume+0x0/0x1d7 @ 1
[ 40.220470] PM: Resume from disk failed.
[ 40.224456] initcall software_resume+0x0/0x1d7 returned -2 after 3892 usecs
[ 40.231476] initcall software_resume+0x0/0x1d7 returned with error code -2
[ 40.238499] calling debugfs_kprobe_init+0x0/0x74 @ 1
[ 40.243615] initcall debugfs_kprobe_init+0x0/0x74 returned 0 after 3 usecs
[ 40.250543] calling taskstats_init+0x0/0x76 @ 1
[ 40.255225] registered taskstats version 1
[ 40.259383] initcall taskstats_init+0x0/0x76 returned 0 after 4063 usecs
[ 40.266143] calling clear_boot_tracer+0x0/0x23 @ 1
[ 40.271082] initcall clear_boot_tracer+0x0/0x23 returned 0 after 0 usecs
[ 40.277843] calling max_swapfiles_check+0x0/0x3 @ 1
[ 40.282868] initcall max_swapfiles_check+0x0/0x3 returned 0 after 0 usecs
[ 40.289715] calling random32_reseed+0x0/0x80 @ 1
[ 40.294522] initcall random32_reseed+0x0/0x80 returned 0 after 39 usecs
[ 40.301154] calling pci_resource_alignment_sysfs_init+0x0/0xf @ 1
[ 40.307396] initcall pci_resource_alignment_sysfs_init+0x0/0xf returned 0 after 1 usecs
[ 40.315453] calling pci_sysfs_init+0x0/0x40 @ 1
[ 40.321063] initcall pci_sysfs_init+0x0/0x40 returned 0 after 908 usecs
[ 40.327583] calling boot_wait_for_devices+0x0/0x2b @ 1
[ 40.332869] initcall boot_wait_for_devices+0x0/0x2b returned 0 after 0 usecs
[ 40.339974] calling regulator_init_complete+0x0/0xe9 @ 1
[ 40.345434] initcall regulator_init_complete+0x0/0xe9 returned 0 after 0 usecs
[ 40.352713] calling seqgen_init+0x0/0xa @ 1
[ 40.357056] initcall seqgen_init+0x0/0xa returned 0 after 8 usecs
[ 40.363200] calling rtc_hctosys+0x0/0x11c @ 1
[ 40.367772] rtc_cmos 00:04: setting system clock to 2010-11-16 18:40:40 UTC (1289932840)
[ 40.375854] initcall rtc_hctosys+0x0/0x11c returned 0 after 7955 usecs
[ 40.382439] calling memmap_init+0x0/0x7d @ 1
[ 40.386896] initcall memmap_init+0x0/0x7d returned 0 after 36 usecs
[ 40.393185] calling pci_mmcfg_late_insert_resources+0x0/0x137 @ 1
[ 40.399427] initcall pci_mmcfg_late_insert_resources+0x0/0x137 returned 0 after 1 usecs
[ 40.407485] calling init_net_drop_monitor+0x0/0x107 @ 1
[ 40.412857] Initalizing network drop monitor service
[ 40.417912] initcall init_net_drop_monitor+0x0/0x107 returned 0 after 4935 usecs
[ 40.425339] calling tcp_congestion_default+0x0/0xa @ 1
[ 40.430626] initcall tcp_congestion_default+0x0/0xa returned 0 after 0 usecs
[ 40.437731] calling initialize_hashrnd+0x0/0x12 @ 1
[ 40.442760] initcall initialize_hashrnd+0x0/0x12 returned 0 after 2 usecs
[ 40.449618] async_waiting @ 1
[ 40.452638] async_continuing @ 1 after 0 usec
[ 40.457074] Freeing unused kernel memory: 396k freed
[ 40.462669] Write protecting the kernel text: 2632k
[ 40.467661] Write protecting the kernel read-only data: 968k
Loading, please wait...
[ 40.503862] udev[172]: starting version 163
[ 40.528532] calling thermal_init+0x0/0x2e [thermal_sys] @ 232
[ 40.534318] i(XEN) IOAPIC[1]: Set PCI routing entry (1-4 -> 0x61 -> IRQ 36 Mode:1 Active:1)
nitcall thermal_init+0x0/0x2e [thermal_sys] returned 0 after 41 usecs
[ 40.534523] calling bnx2_init+0x0/0x14 [bnx2] @ 233
[ 40.534537] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
[ 40.534558] xen: registering gsi 36 triggering 0 polarity 1
[ 40.534568] xen: --> irq=36
[ 40.543995] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 40.544007] bnx2 0000:01:00.0: setting latency timer to 64
[ 40.544227] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 40.591102] calling acpi_thermal_init+0x0/0x6b [thermal] @ 232
[ 40.596991] initcall acpi_thermal_init+0x0/0x6b [thermal] returned 0 after 57 usecs
[ 40.623281] calling init_scsi+0x0/0x73 [scsi_mod] @ 265
[ 40.628820] SCSI subsystem initialized
[ 40.632495] initcall init_scsi+0x0/0x73 [scsi_mod] returned 0 after 3804 usecs
[ 40.639430] calling usb_init+0x0/0x17f [usbcore] @ 278
[ 40.639520] usbcore: registered new interface(XEN) IOAPIC[0]: Set PCI routing entry (0-19 -> 0x69 -> IRQ 19 Mode:1 Active:1)
driver usbfs
[ 40.639541] usbcore: registered new interface driver hub
[ 40.639600] usbcore: registered new device driver usb
[ 40.639615] initcall usb_init+0x0/0x17f [usbcore] returned 0 after 165 usecs
[ 40.647826] calling ehci_hcd_init+0x0/0x67 [ehci_hcd] @ 278
[ 40.647829] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 40.647863] xen: registering gsi 19 triggering 0 polarity 1
[ 40.647870] xen: --> irq=19
[ 40.656234] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 40.656255] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 40.656260] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 40.656280] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 40.702972] ehci_hcd 0000:00:1a.7: debug port 1
[ 40.706853] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 40.706878] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0df800
[ 40.739231] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 40.744896] calling sas_transport_init+0x0/0x9b [scsi_transport_sas] @ 265
[ 40.744932] u(XEN) IOAPIC[0]: Set PCI routing entry (0-21 -> 0x79 -> IRQ 21 Mode:1 Active:1)
sb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 40.744934] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 40.744937] usb usb1: Product: EHCI Host Controller
[ 40.744938] usb usb1: Manufacturer: Linux 2.6.32-5-xen-686 ehci_hcd
[ 40.744940] usb usb1: SerialNumber: 0000:00:1a.7
[ 40.745008] usb usb1: configuration #1 chosen from 1 choice
[ 40.745035] hub 1-0:1.0: USB hub found
[ 40.751918] hub 1-0:1.0: 4 ports detected
[ 40.751991] xen: registering gsi 21 triggering 0 polarity 1
[ 40.751997] xen: --> irq=21
[ 40.760319] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 40.760338] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 40.760343] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 40.760351] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 40.797424] ehci_hcd 0000:00:1d.7: debug port 1
[ 40.801328] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 40.801350] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0dfc00
[ 40.828337] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 40.828362] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
(XEN) IOAPIC[0]: Set PCI routing entry (0-17 -> 0x89 -> IRQ 17 Mode:1 Active:1)
[ 40.828365] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 40.828367] usb usb2: Product: EHCI Host Controller
[ 40.828369] usb usb2: Manufacturer: Linux 2.6.32-5-xen-686 ehci_hcd
[ 40.828371] usb usb2: SerialNumber: 0000:00:1d.7
(XEN) IOAPIC[0]: Set PCI routing entry (0-18 -> 0x99 -> IRQ 18 Mode:1 Active:1)
[ 40.828432] usb usb2: configuration #1 chosen from 1 choice
[ 40.828458] hub 2-0:1.0: USB hub found
[ 40.855455] hub 2-0:1.0: 4 ports detected
[ 40.855530] initcall ehci_hcd_init+0x0/0x67 [ehci_hcd] returned 0 after 202830 usecs
[ 40.865383] calling uhci_hcd_init+0x0/0xa4 [uhci_hcd] @ 278
[ 40.865386] uhci_hcd: USB Universal Host Controller Interface driver
[ 40.865424] xen: registering gsi 17 triggering 0 polarity 1
[ 40.865430] xen: --> irq=17
[ 40.873704] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 40.873715] uhci_hcd 0000:00:(XEN) IOAPIC[0]: Set PCI routing entry (0-20 -> 0xa9 -> IRQ 20 Mode:1 Active:1)
1a.0: setting latency timer to 64
[ 40.873720] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 40.873730] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 40.873779] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
[ 40.892287] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 40.892290] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 40.892292] usb usb3: Product: UHCI Host Controller
[ 40.892294] usb usb3: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[ 40.892296] usb usb3: SerialNumber: 0000:00:1a.0
[ 40.892354] usb usb3: configuration #1 chosen from 1 choice
[ 40.892385] hub 3-0:1.0: USB hub found
[ 40.896418] hub 3-0:1.0: 2 ports detected
[ 40.896476] xen: registering gsi 18 triggering 0 polarity 1
[ 40.896481] xen: --> irq=18
[ 40.903952] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 40.903962] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 40.903967] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 40.903976] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 40.904025] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
[ 40.925321] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 40.925323] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 40.925325] usb usb4: Product: UHCI Host Controller
[ 40.925327] usb usb4: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[ 40.925329] usb usb4: SerialNumber: 0000:00:1a.1
[ 40.925385] usb usb4: configuration #1 chosen from 1 choice
[ 40.925413] hub 4-0:1.0: USB hub found
[ 40.936548] hub 4-0:1.0: 2 ports detected
[ 40.936618] xen: registering gsi 21 triggering 0 polarity 1
[ 40.936621] xen_allocate_pirq: returning irq 21 for gsi 21
[ 40.936622] xen: --> irq=21
[ 40.936626] Already setup the GSI :21
[ 40.936629] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 40.936639] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 40.936644] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 40.936652] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 40.936690] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
[ 40.952901] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 40.952904] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 40.952906] usb usb5: Product: UHCI Host Controller
[ 40.952908] usb usb5: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[ 40.952910] usb usb5: SerialNumber: 0000:00:1d.0
[ 40.952973] usb usb5: configuration #1 chosen from 1 choice
[ 40.953001] hub 5-0:1.0: USB hub found
[ 40.954480] hub 5-0:1.0: 2 ports detected
[ 40.954540] xen: registering gsi 20 triggering 0 polarity 1
[ 40.954548] xen: --> irq=20
[ 40.962884] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 40.962894] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 40.962898] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 40.962907] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 40.962959] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
[ 40.980189] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 40.980192] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 40.980194] usb usb6: Product: UHCI Host Controller
[ 40.980196] usb usb6: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[ 40.980198] usb usb6: SerialNumber: 0000:00:1d.1
[ 40.980253] usb usb6: configuration #1 chosen from 1 choice
[ 40.980279] hub 6-0:1.0: USB hub found
[ 40.982905] hub 6-0:1.0: 2 ports detected
[ 40.982974] initcall uhci_hcd(XEN) IOAPIC[1]: Set PCI routing entry (1-16 -> 0xb9 -> IRQ 48 Mode:1 Active:1)
_init+0x0/0xa4 [uhci_hcd] returned 0 after 114829 usecs
[ 41.098000] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 41.129687] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 41.259567] usb 1-3: New USB device found, idVendor=0424, idProduct=2514
[ 41.259571] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 41.259655] usb 1-3: configuration #1 chosen from 1 choice
[ 41.259862] hub 1-3:1.0: USB hub found
[ 41.259930] hub 1-3:1.0: 3 ports detected
[ 41.290134] eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr b8:ac:6f:8d:7a:87
[ 41.290157] xen: registering gsi 48 triggering 0 polarity 1
[ 41.290162] xen: --> irq=48
[ 41.298365] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
[ 41.298373] bnx2 0000:01:00.1: setting latency timer to 64
[ 41.298580] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 41.386104] initcall sas_transport_init+0x0/0x9b [scsi_transport_sas] returned 0 after 212 usecs
[ 41.396036] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2(XEN) IOAPIC[1]: Set PCI routing entry (1-1 -> 0xc1 -> IRQ 33 Mode:1 Active:1)
-rv2p-09-5.0.0.j3.fw
[ 41.400064] calling _scsih_init+0x0/0xe8 [mpt2sas] @ 265
[ 41.400066] mpt2sas version 02.100.03.00 loaded
[ 41.400267] scsi0 : Fusion MPT SAS Host
[ 41.400655] xen: registering gsi 33 triggering 0 polarity 1
[ 41.400661] xen: --> irq=33
[ 41.408375] mpt2sas 0000:03:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
[ 41.408384] mpt2sas 0000:03:00.0: setting latency timer to 64
[ 41.408389] mpt2sas0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (1033868 kB)
[ 41.408585] mpt2sas0: PCI-MSI-X enabled: IRQ 1466
[ 41.408588] mpt2sas0: iomem(0xdf2b0000), mapped(0xf1dc0000), size(65536)
[ 41.408590] mpt2sas0: ioport(0xfc00), size(256)
[ 41.408592] mpt2sas0: sending diag reset !!
[ 41.479404] eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr b8:ac:6f:8d:7a:89
[ 41.491464] xen: registering gsi 32 triggering 0 polarity 1
[ 41.497041] xen: --> irq=32
(XEN) IOAPIC[1]: Set PCI routing entry (1-0 -> 0xd9 -> IRQ 32 Mode:1 Active:1)
[ 41.506815] bnx2 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 41.513659] bnx2 0000:02:00.0: setting latency timer to 64
[ 41.519396] bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 41.531523] bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 41.543792] eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr b8:ac:6f:8d:7a:8b
[ 41.555800] xen: registering gsi 42 triggering 0 polarity 1
[ 41.561412] xen: --> irq=42
(XEN) IOAPIC[1]: Set PCI routing entry (1-10 -> 0x22 -> IRQ 42 Mode:1 Active:1)
[ 41.571289] bnx2 0000:02:00.1: PCI INT B -> GSI 42 (level, low) -> IRQ 42
[ 41.578133] bnx2 0000:02:00.1: setting latency timer to 64
[ 41.583855] bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 41.595957] bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 41.608215] eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr b8:ac:6f:8d:7a:8d
[ 41.620226] initcall bnx2_init+0x0/0x14 [bnx2] returned 0 after 1060249 usecs
[ 41.625976] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 41.788852] usb 5-2: New USB device found, idVendor=0624, idProduct=0248
[ 41.795458] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 41.802650] usb 5-2: Product: USB Composite Device-0
[ 41.807677] usb 5-2: Manufacturer: Avocent
[ 41.811837] usb 5-2: SerialNumber: 20080519
[ 41.816338] usb 5-2: configuration #1 chosen from 1 choice
[ 41.837968] calling hid_init+0x0/0x52 [hid] @ 352
[ 41.842820] initcall hid_init+0x0/0x52 [hid] returned 0 after 145 usecs
[ 41.851517] calling hid_init+0x0/0xaa [usbhid] @ 353
[ 41.856581] usbcore: registered new interface driver hiddev
[ 41.867128] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input0
[ 41.877486] generic-usb 0003:0624:0248.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[ 41.894082] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input1
[ 41.904485] generic-usb 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[ 41.917341] usbcore: registered new interface driver usbhid
[ 41.922819] usbhid: v2.6:USB HID core driver
[ 41.927155] initcall hid_init+0x0/0xaa [usbhid] returned 0 after 69019 usecs
[ 42.621322] mpt2sas0: diag reset: SUCCESS
[ 43.061796] mpt2sas0: Allocated physical memory: size(739 kB)
[ 43.067447] mpt2sas0: Current Controller Queue Depth(467), Max Controller Queue Depth(3439)
[ 43.075853] mpt2sas0: Scatter Gather Elements per IO(128)
[ 43.313863] mpt2sas0: LSISAS2008: FWVersion(02.15.63.00), ChipRevision(0x02), BiosVersion(07.01.09.00)
[ 43.323071] mpt2sas0: Dell PERC H200 Integrated: Vendor(0x1000), Device(0x0072), SSVID(0x1028), SSDID(0x1F1E)
[ 43.333035] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[ 43.345096] mpt2sas0: sending port enable !!
[ 44.980446] mpt2sas0: host_add: handle(0x0001), sas_addr(0x5842b2b0512d3300), phys(8)
[ 44.988461] mpt2sas0: failure at /build/buildd-linux-2.6_2.6.32-27-i386-c5N4Hf/linux-2.6-2.6.32/debian/build/source_i386_xen/drivers/scsi/mpt2sas/mpt2sas_scsih.c:3801/_scsih_add_device()!
[ 50.226533] mpt2sas0: port enable: SUCCESS
[ 50.231247] scsi 0:0:0:0: Direct-Access HITACHI HUS156060VLS600 E516 PQ: 0 ANSI: 6
[ 50.239242] scsi 0:0:0:0: SSP: handle(0x000c), sas_addr(0x5000cca00fa20fd1), device_name(0xa0cc0050d30fa20f)
[ 50.249120] scsi 0:0:0:0: SSP: enclosure_logical_id(0x5842b2b0512d3300), slot(0)
[ 50.256573] scsi 0:0:0:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
[ 50.266830] scsi 0:0:1:0: Direct-Access HITACHI HUS156060VLS600 E516 PQ: 0 ANSI: 6
[ 50.274824] scsi 0:0:1:0: SSP: handle(0x000a), sas_addr(0x5000cca00fa1ef81), device_name(0xa0cc005083efa10f)
[ 50.284702] scsi 0:0:1:0: SSP: enclosure_logical_id(0x5842b2b0512d3300), slot(2)
[ 50.292155] scsi 0:0:1:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
[ 50.302609] scsi 0:0:2:0: Direct-Access HITACHI HUS156060VLS600 E516 PQ: 0 ANSI: 6
[ 50.310603] scsi 0:0:2:0: SSP: handle(0x000b), sas_addr(0x5000cca00fa21199), device_name(0xa0cc00509b11a20f)
[ 50.320481] scsi 0:0:2:0: SSP: enclosure_logical_id(0x5842b2b0512d3300), slot(1)
[ 50.327934] scsi 0:0:2:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
[ 50.337667] initcall _scsih_init+0x0/0xe8 [mpt2sas] returned 0 after 8728117 usecs
[ 50.350948] calling init_sd+0x0/0x139 [sd_mod] @ 361
[ 50.356123] initcall init_sd+0x0/0x139 [sd_mod] returned 0 after 207 usecs
[ 50.356354] sd 0:0:0:0: [sda] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
[ 50.356396] sd 0:0:1:0: [sdb] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
[ 50.356417] sd 0:0:2:0: [sdc] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
[ 50.357102] sd 0:0:0:0: [sda] Write Protect is off
[ 50.357106] sd 0:0:0:0: [sda] Mode Sense: db 00 10 08
[ 50.357129] sd 0:0:1:0: [sdb] Write Protect is off
[ 50.357132] sd 0:0:1:0: [sdb] Mode Sense: db 00 10 08
[ 50.357141] sd 0:0:2:0: [sdc] Write Protect is off
[ 50.357143] sd 0:0:2:0: [sdc] Mode Sense: db 00 10 08
[ 50.357480] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 50.357541] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 50.357577] sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 50.358636] sda:
[ 50.358663] sdb:
[ 50.358765] sdc: sda1 sda2 sda3 sda4
[ 50.449429] sdb1 sdb2 sdb3 sdb4
[ 50.452796] sdc1 sdc2 sdc3 sdc4
[ 50.457489] sd 0:0:2:0: [sdc] Attached SCSI disk
[ 50.462442] sd 0:0:0:0: [sda] Attached SCSI disk
[ 50.462547] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 50.705215] calling wait_scan_init+0x0/0x8 [scsi_wait_scan] @ 390
[ 50.711302] initcall wait_scan_init+0x0/0x8 [scsi_wait_scan] returned 0 after 0 usecs
[ 50.772173] calling md_init+0x0/0xb9 [md_mod] @ 411
[ 50.777062] initcall md_init+0x0/0xb9 [md_mod] returned 0 after 13 usecs
[ 50.785525] calling raid_init+0x0/0xa [raid1] @ 411
[ 50.790396] md: raid1 personality registered for level 1
[ 50.795772] initcall raid_init+0x0/0xa [raid1] returned 0 after 5248 usecs
[ 50.840278] md: md0 stopped.
[ 50.844926] md: bind<sdb3>
[ 50.847690] md: bind<sdc3>
[ 50.850452] md: bind<sda3>
[ 50.853159] md: kicking non-fresh sdc3 from array!
[ 50.857947] md: unbind<sdc3>
[ 50.886994] md: export_rdev(sdc3)
[ 50.890268] md: kicking non-fresh sdb3 from array!
[ 50.895076] md: unbind<sdb3>
[ 50.918988] md: export_rdev(sdb3)
[ 50.923969] raid1: raid set md0 active with 1 out of 3 mirrors
[ 50.930019] md0: bitmap initialized from disk: read 1/1 pages, set 295 bits
[ 50.936884] created bitmap (1 pages) for device md0
[ 50.946304] md0: detected capacity change from 0 to 21483309056
[ 50.953519] md0: unknown partition table
[ 51.160376] calling dm_init+0x0/0x34 [dm_mod] @ 424
[ 51.165463] device-mapper: uevent: version 1.0.3
[ 51.170121] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[ 51.178486] initcall dm_init+0x0/0x34 [dm_mod] returned 0 after 12924 usecs
[ 51.200983] calling init_mbcache+0x0/0xd [mbcache] @ 432
[ 51.206290] initcall init_mbcache+0x0/0xd [mbcache] returned 0 after 0 usecs
[ 51.215744] calling journal_init+0x0/0x7f [jbd] @ 432
[ 51.221142] initcall journal_init+0x0/0x7f [jbd] returned 0 after 339 usecs
[ 51.232370] calling init_ext3_fs+0x0/0x5e [ext3] @ 432
[ 51.237806] initcall init_ext3_fs+0x0/0x5e [ext3] returned 0 after 292 usecs
[ 51.254648] kjournald starting. Commit interval 5 seconds
[ 51.254655] EXT3-fs: mounted filesystem with ordered data mode.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 51.848008] udev[484]: starting version 163
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 51.978426] calling xen_acpi_processor_extcntl_init+0x0/0x45 [acpi_processor] @ 501
[ 51.986127] initcall xen_acpi_processor_extcntl_init+0x0/0x45 [acpi_processor] returned 0 after 0 usecs
[ 51.997416] calling acpi_button_init+0x0/0x46 [button] @ 547
[ 52.001438] calling acpi_processor_init+0x0/0x10b [processor] @ 514
[ 52.002057] initcall acpi_processor_init+0x0/0x10b [processor] returned 0 after 597 usecs
[ 52.018225] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 52.025528] ACPI: Power Button [PWRF]
[ 52.029270] calling acpi_power_meter_init+0x0/0x2b [power_meter] @ 555
[ 52.029295] initcall acpi_button_init+0x0/0x46 [button] returned 0 after 11304 usecs
[ 52.044858] ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
[ 52.054954] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node f0c0e6a8), AE_AML_BUFFER_LIMIT
[ 52.066133] calling dca_init+0x0/0x16 [dca] @ 609
[ 52.066144] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node f0c0e648), AE_AML_BUFFER_LIMIT
[ 52.066175] ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMC (20090903/power_meter-772)
[ 52.066200] initcall acpi_power_meter_init+0x0/0x2b [power_meter] returned 0 after 21948 usecs
[ 52.099216] dca service started, version 1.12.1
[ 52.107967] initcall dca_init+0x0/0x16 [dca] returned 0 after 8544 usecs
[ 52.108592] udev[550]: renamed network interface eth3 to eth4
[ 52.121569] udev[571]: renamed network interface eth1 to eth1-eth2
[ 52.121979] udev[549]: renamed network interface eth2 to eth3
[ 52.122352] udev[569]: renamed network interface eth0 to eth1
[ 52.139767] calling ioat_init_module+0x0/0x66 [ioatdma] @ 613
[ 52.145518] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 52.151513] xen: registering gsi 51 triggering 0 polarity 1
[ 52.157071] xen: --> irq=51
(XEN) IOAPIC[1]: Set PCI routing entry (1-19 -> 0x2a -> IRQ 51 Mode:1 Active:1)
[ 52.159914] calling serio_raw_init+0x0/0x14 [serio_raw] @ 629
[ 52.166921] ioatdma 0000:00:16.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
[ 52.166989] ioatdma 0000:00:16.0: setting latency timer to 64
[ 52.179758] calling pcspkr_init+0x0/0xa [pcspkr] @ 630
[ 52.179804] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 52.179821] initcall pcspkr_init+0x0/0xa [pcspkr] returned 0 after 58 usecs
[ 52.195569] udev[571]: renamed network interface eth1-eth2 to eth2
[ 52.211764] xen: registering gsi 52 triggering 0 polarity 1
[ 52.217307] xen: --> irq=52
(XEN) IOAPIC[1]: Set PCI routing entry (1-20 -> 0x42 -> IRQ 52 Mode:1 Active:1)
[ 52.227141] ioatdma 0000:00:16.1: PCI INT B -> GSI 52 (level, low) -> IRQ 52
[ 52.234430] initcall serio_raw_init+0x0/0x14 [serio_raw] returned 0 after 23024 usecs
[ 52.234803] ioatdma 0000:00:16.1: setting latency timer to 64
[ 52.248730] xen: registering gsi 53 triggering 0 polarity 1
[ 52.254241] xen_allocate_pirq: returning irq 53 for gsi 53
[ 52.259755] xen: --> irq=53
[ 52.262628] Already setup the GSI :53
[ 52.266349] ioatdma 0000:00:16.2: PCI INT C -> GSI 53 (level, low) -> IRQ 53
[ 52.273559] ioatdma 0000:00:16.2: setting latency timer to 64
[ 52.280169] calling joydev_init+0x0/0xa [joydev] @ 668
[ 52.285434] initcall joydev_init+0x0/0xa [joydev] returned 0 after 105 usecs
[ 52.289474] calling dcdbas_init+0x0/0x4f [dcdbas] @ 650
[ 52.289519] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 52.289524] initcall dcdbas_init+0x0/0x4f [dcdbas] returned 0 after 45 usecs
[ 52.312903] xen: registering gsi 54 triggering 0 polarity 1
[ 52.318422] xen: --> irq=54
(XEN) IOAPIC[1]: Set PCI routing entry (1-22 -> 0x6a -> IRQ 54 Mode:1 Active:1)
[ 52.321392] calling psmouse_init+0x0/0x5e [psmouse] @ 629
[ 52.328271] ioatdma 0000:00:16.3: PCI INT D -> GSI 54 (level, low) -> IRQ 54
[ 52.328296] ioatdma 0000:00:16.3: setting latency timer to 64
[ 52.332431] calling evdev_init+0x0/0xa [evdev] @ 668
[ 52.332496] initcall evdev_init+0x0/0xa [evdev] returned 0 after 59 usecs
[ 52.343703] calling snd_mem_init+0x0/0x22 [snd_page_alloc] @ 630
[ 52.343713] initcall snd_mem_init+0x0/0x22 [snd_page_alloc] returned 0 after 5 usecs
[ 52.353485] xen: registering gsi 51 triggering 0 polarity 1
[ 52.353487] xen_allocate_pirq: returning irq 51 for gsi 51
[ 52.353489] xen: --> irq=51
[ 52.353492] Already setup the GSI :51
[ 52.353494] ioatdma 0000:00:16.4: PCI INT A -> GSI 51 (level, low) -> IRQ 51
[ 52.353516] ioatdma 0000:00:16.4: setting latency timer to 64
[ 52.403632] initcall psmouse_init+0x0/0x5e [psmouse] returned 0 after 305 usecs
[ 52.404090] xen: registering gsi 52 triggering 0 polarity 1
[ 52.404092] xen_allocate_pirq: returning irq 52 for gsi 52
[ 52.404094] xen: --> irq=52
[ 52.404097] Already setup the GSI :52
[ 52.404099] ioatdma 0000:00:16.5: PCI INT B -> GSI 52 (level, low) -> IRQ 52
[ 52.404122] ioatdma 0000:00:16.5: setting latency timer to 64
[ 52.442583] calling init_soundcore+0x0/0x81 [soundcore] @ 630
[ 52.448360] initcall init_soundcore+0x0/0x81 [soundcore] returned 0 after 35 usecs
[ 52.456434] xen: registering gsi 53 triggering 0 polarity 1
[ 52.461915] xen_allocate_pirq: returning irq 53 for gsi 53
[ 52.467459] xen: --> irq=53
[ 52.470346] Already setup the GSI :53
[ 52.474049] ioatdma 0000:00:16.6: PCI INT C -> GSI 53 (level, low) -> IRQ 53
[ 52.481749] ioatdma 0000:00:16.6: setting latency timer to 64
[ 52.487473] calling alsa_sound_init+0x0/0x78 [snd] @ 630
[ 52.492921] initcall alsa_sound_init+0x0/0x78 [snd] returned 0 after 50 usecs
[ 52.500064] xen: registering gsi 54 triggering 0 polarity 1
[ 52.505688] xen_allocate_pirq: returning irq 54 for gsi 54
[ 52.511233] xen: --> irq=54
[ 52.514108] Already setup the GSI :54
[ 52.517824] ioatdma 0000:00:16.7: PCI INT D -> GSI 54 (level, low) -> IRQ 54
[ 52.524984] ioatdma 0000:00:16.7: setting latency timer to 64
[ 52.531398] initcall ioat_init_module+0x0/0x66 [ioatdma] returned 0 after 376831 usecs
[ 52.535411] calling alsa_timer_init+0x0/0x129 [snd_timer] @ 630
[ 52.535563] initcall alsa_timer_init+0x0/0x129 [snd_timer] returned 0 after 143 usecs
[ 52.559589] calling alsa_pcm_init+0x0/0x4c [snd_pcm] @ 630
[ 52.565093] initcall alsa_pcm_init+0x0/0x4c [snd_pcm] returned 0 after 17 usecs
[ 52.583120] calling pcsp_init+0x0/0x19 [snd_pcsp] @ 630
[ 52.588338] Error: Driver 'pcspkr' is already registered, aborting...
[ 52.594841] initcall pcsp_init+0x0/0x19 [snd_pcsp] returned -16 after 6349 usecs
[ 52.602294] initcall pcsp_init+0x0/0x19 [snd_pcsp] returned with error code -16
done.
Assembling MD arrays...done (disabled in /etc/default/mdadm).
Setting preliminary keymap...done.
Checking root file system...fsck from util-linux-ng 2.17.2
rootfs: clean, 88366/1313760 files, 1010810/5244948 blocks
done.
[ 53.075092] EXT3 FS on md0, internal journal
Cleaning up ifupdown....
Setting up networking....
[ 53.139317] calling loop_init+0x0/0x168 [loop] @ 839
[ 53.146434] loop: module loaded
[ 53.149490] initcall loop_init+0x0/0x168 [loop] returned 0 after 5088 usecs
Loading kernel modules...done.
Setting up LVM Volume Groups Reading all physical volumes. This may take a while...
Found volume group "vg0" using metadata type lvm2
1 logical volume(s) in volume group "vg0" now active
.
Activating lvm and md swap...[ 53.930361] Adding 1023992k swap on /var/tmp/swap. Priority:-1 extents:328 across:1087432k
done.
Checking file systems...fsck from util-linux-ng 2.17.2
done.
Mounting local filesystems...[ 54.010784] calling init_reiserfs_fs+0x0/0x71 [reiserfs] @ 937
[ 54.016671] initcall init_reiserfs_fs+0x0/0x71 [reiserfs] returned 0 after 54 usecs
[ 54.029925] REISERFS (device dm-0): found reiserfs format "3.6" with standard journal
[ 54.037680] REISERFS (device dm-0): using ordered data mode
[ 54.046114] REISERFS (device dm-0): journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 54.061408] REISERFS (device dm-0): checking transaction log (dm-0)
[ 54.074893] REISERFS (device dm-0): Using r5 hash to sort names
done.
Activating swapfile swap...done.
Cleaning up temporary files....
Setting kernel variables ...done.
Configuring network interfaces...[ 54.409786] calling br_init+0x0/0xae [bridge] @ 1048
[ 54.414786] Bridge firewalling registered
[ 54.418823] initcall br_init+0x0/0xae [bridge] returned 0 after 3980 usecs
[ 54.445254] device eth1 entered promiscuous mode
[ 54.503370] bnx2: eth1: using MSIX
[ 54.506813] ADDRCONF(NETDEV_UP): eth1: link is not ready
Waiting for xenbr1 to get ready (MAXWAIT is 2 seconds).
WARNING: Could not open /proc/net/vlan/config. Maybe you need to load the 8021q module, or maybe you are not using PROCFS??
[ 56.612284] calling vlan_proto_init+0x0/0xa1 [8021q] @ 1115
[ 56.617849] 802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com>
[ 56.624694] All bugs added by David S. Miller <davem at redhat.com>
[ 56.630770] initcall vlan_proto_init+0x0/0xa1 [8021q] returned 0 after 12616 usecs
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
[ 56.729043] bnx2: eth2: using MSIX
[ 56.732484] ADDRCONF(NETDEV_UP): eth2: link is not ready
Added VLAN with VID == 2 to IF -:eth2:-
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
[ 56.820914] device eth2.2 entERROR: trying to add VLAN #2 to IF -:eth2:- error: File existsered promiscuous
mode
[ 56.832685] device eth2 entered promiscuous mode
[ 56.841097] xenbr22: port 1(eth2.2) entering forwarding state
Waiting for xenbr22 to get ready (MAXWAIT is 2 seconds).
[ 57.636721] bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex
[ 57.643092] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 57.648764] xenbr1: port 1(eth1) entering forwarding state
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 3 to IF -:eth2:-
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
[ 57.951550] device eth2.3 entERROR: trying to add VLAN #3 to IF -:eth2:- error: File existsered promiscuous
mode
[ 57.967109] xenbr23: port 1(eth2.3) entering forwarding state
Waiting for xenbr23 to get ready (MAXWAIT is 2 seconds).
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 4 to IF -:eth2:-
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
[ 59.077014] device eth2.4 entered promiscuous mode
ERROR: trying to add VLAN #4 to IF -:eth2:- error: File exists
[ 59.092559] xenbr24: port 1(eth2.4) entering forwarding state
Waiting for xenbr24 to get ready (MAXWAIT is 2 seconds).
[ 59.855755] bnx2: eth2 NIC Copper Link is Up, 1000 Mbps full duplex
[ 59.862124] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 5 to IF -:eth2:-
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
ERROR: trying to add VLAN #5 to IF -:eth2:- error: File exists
[ 60.208571] device eth2.5 entered promiscuous mode
[ 60.218461] xenbr25: port 1(eth2.5) entering forwarding state
Waiting for xenbr25 to get ready (MAXWAIT is 2 seconds).
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 9 to IF -:eth2:-
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
ERROR: trying to add VLAN #9 to IF -:eth2:- error: File exists[ 61.330109] d
evice eth2.9 entered promiscuous mode
[ 61.345798] xenbr29: port 1(eth2.9) entering forwarding state
Waiting for xenbr29 to get ready (MAXWAIT is 2 seconds).
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 11 to IF -:eth2:-
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
[ 62.456225] device eth2.11 entered promiscuouERROR: trying to add VLAN #11 to IF -:eth2:- error: File existss mode
[ 62.472019] xenbr211: port 1(eth2.11) entering forwarding state
Waiting for xenbr211 to get ready (MAXWAIT is 2 seconds).
[ 63.550090] device eth3 entered promiscuous mode
[ 63.607896] bnx2: eth3: using MSIX
[ 63.611339] ADDRCONF(NETDEV_UP): eth3: link is not ready
Waiting for xenbr314 to get ready (MAXWAIT is 4 seconds).
[ 64.845306] xenbr1: no IPv6 routers present
[ 66.755544] bnx2: eth3 NIC Copper Link is Up, 1000 Mbps full duplex
[ 66.761922] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 66.767595] xenbr314: port 1(eth3) entering learning state
[ 67.361313] eth2.2: no IPv6 routers present
[ 67.629308] xenbr22: no IPv6 routers present
[ 67.705666] device eth4 entered promiscuous mode
[ 67.761307] xenbr314: port 1(eth3) entering forwarding state
[ 67.763736] bnx2: eth4: using MSIX
[ 67.763871] ADDRCONF(NETDEV_UP): eth4: link is not ready
Waiting for xenbr4 to get ready (MAXWAIT is 4 seconds).
[ 67.937305] eth1: no IPv6 routers present
[ 68.437307] eth2.3: no IPv6 routers present
[ 68.653306] xenbr23: no IPv6 routers present
[ 69.269304] xenbr24: no IPv6 routers present
[ 69.597304] eth2.4: no IPv6 routers present
[ 70.437306] eth2: no IPv6 routers present
[ 70.705311] xenbr25: no IPv6 routers present
[ 70.974336] bnx2: eth4 NIC Copper Link is Up, 1000 Mbps full duplex
[ 70.980704] ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
[ 70.986374] xenbr4: port 1(eth4) entering learning state
[ 71.017307] eth2.5: no IPv6 routers present
[ 71.453304] eth2.9: no IPv6 routers present
done.
Starting portmap daemon....
[ 71.921639] xenbr29: no IPv6 routers present
Starting NFS common utilities: statd[ 71.981302] xenbr4: port 1(eth4) entering forwarding state
.
Cleaning up temporary files....
[ 72.078423] calling fuse_init+0x0/0x11a [fuse] @ 1897
[ 72.083468] fuse init (API version 7.13)
[ 72.088900] initcall fuse_init+0x0/0x11a [fuse] returned 0 after 5299 usecs
Setting console screen modes.
Rcannot (un)set powersave mode
Skipping font and keymap setup (handled by console-setup).
Setting up console font and keymap...done.
Running scripts in rcS.d/ took 21 seconds.
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Starting portmap daemon...Already running..
Starting NFS common utilities: statd.
[ 72.486789] calling xenfs_init+0x0/0x53 [xenfs] @ 2021
[ 72.491929] initcall xenfs_init+0x0/0x53 [xenfs] returned 0 after 6 usecs
[ 72.509889] calling evtchn_init+0x0/0x5c [xen_evtchn] @ 2028
[ 72.515758] Event-channel device installed.
[ 72.519852] initcall evtchn_init+0x0/0x5c [xen_evtchn] returned 0 after 4209 usecs
Starting enhanced syslogd: rsyslogd.
Starting MD monitoring service: mdadm --monitor.
[ 72.670475] xenbr211: no IPv6 routers present
Starting deferred execution scheduler: atd.
Starting ACPI services....
Starting periodic command scheduler: cron.
Starting NTP server: ntpd.
[ 73.153627] XENBUS: Unable to read cpu state
[ 73.157995] XENBUS: Unable to read cpu state
[ 73.162315] XENBUS: Unable to read cpu state
[ 73.166913] XENBUS: Unable to read cpu state
[ 73.171381] XENBUS: Unable to read cpu state
[ 73.175829] XENBUS: Unable to read cpu state
[ 73.180275] XENBUS: Unable to read cpu state
[ 73.184704] XENBUS: Unable to read cpu state
[ 73.189030] XENBUS: Unable to read cpu state
[ 73.193440] XENBUS: Unable to read cpu state
[ 73.198057] XENBUS: Unable to read cpu state
[ 73.202457] XENBUS: Unable to read cpu state
Starting system message bus: dbus.
[ 73.417471] eth2.11: no IPv6 routers present
Starting OpenBSD Secure Shell server: sshd.
Starting MTA: exim4.
Starting S.M.A.R.T. daemon: smartd.
Starting Xen daemons: xenfs xenstored xenconsoled xend[ 74.614410] xenbr314: no IPv6 routers present
.
Running scripts in rc2.d/ took 4 seconds.
[ 76.829154] eth3: no IPv6 routers present
[ 78.645105] xenbr4: no IPv6 routers present
[ 81.588940] eth4: no IPv6 routers present
[ 104.901856] md: bind<sdb3>
[ 104.924822] RAID1 conf printout:
[ 104.927962] --- wd:1 rd:3
[ 104.930735] disk 0, wo:0, o:1, dev:sda3
[ 104.934722] disk 1, wo:1, o:1, dev:sdb3
[ 104.939218] md: recovery of RAID array md0
[ 104.943225] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 104.949118] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[ 104.958740] md: using 128k window, over a total of 20979794 blocks.
[ 215.521039] md: md0: recovery done.
[ 215.553734] RAID1 conf printout:
[ 215.556873] --- wd:2 rd:3
[ 215.559646] disk 0, wo:0, o:1, dev:sda3
[ 215.563633] disk 1, wo:0, o:1, dev:sdb3
[ 341.592126] mpt2sas 0000:03:00.0: DMA: Out of SW-IOMMU space for 65536 bytes.
[ 341.598921] BUG: unable to handle kernel NULL pointer dereference at 00000008
[ 341.606359] IP: [<f1ddb0a4>] _scsih_qcmd+0x412/0x4d0 [mpt2sas]
[ 341.612252] *pdpt = 0000000001466007 *pde = 0000000000000000
[ 341.618059] Oops: 0000 [#1] SMP
[ 341.621352] last sysfs file: /sys/devices/virtual/block/md0/md/mismatch_cnt
[ 341.628376] Modules linked in: xen_evtchn xenfs fuse 8021q garp bridge stp reiserfs loop snd_pcm snd_timer snd soundcore snd_page_alloc evdev psmouse dcdbas joydev pcspkr serio_raw ioatdma dca power_meter processor button acpi_processor ext3 jbd mbcache dm_mod raid1 md_mod sd_mod crc_t10dif usbhid hid mpt2sas uhci_hcd scsi_transport_sas ehci_hcd usbcore nls_base scsi_mod thermal bnx2 thermal_sys [last unloaded: scsi_wait_scan]
[ 341.666157]
[ 341.667720] Pid: 419, comm: md0_raid1 Not tainted (2.6.32-5-xen-686 #1) PowerEdge R710
[ 341.675692] EIP: 0061:[<f1ddb0a4>] EFLAGS: 00010006 CPU: 2
[ 341.681244] EIP is at _scsih_qcmd+0x412/0x4d0 [mpt2sas]
[ 341.686524] EAX: f0ed7344 EBX: 0000000a ECX: f1dd505d EDX: 14000000
[ 341.692850] ESI: 00000000 EDI: efd59f28 EBP: 0000000f ESP: f010bd64
[ 341.699177] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0069
[ 341.704637] Process md0_raid1 (pid: 419, ti=f010a000 task=c1ccfb40 task.ti=f010a000)
[ 341.712435] Stack:
[ 341.714516] 000000fe f0ed7344 f0ddfc00 d5000000 94000000 fffffff1 bf159f00 00000000
[ 341.722056] <0> efd07f00 14000000 efd59f00 f0ddf400 ef08e0c0 f0ed7000 f0ed0228 f1d6597b
[ 341.730114] <0> 00000000 f0ddf400 ee15f1e0 f0ed7000 f1d6a33c efe20530 f0ddf4b0 ef08e0c0
[ 341.738435] Call Trace:
[ 341.740961] [<f1d6597b>] ? scsi_dispatch_cmd+0x179/0x1e5 [scsi_mod]
[ 341.747366] [<f1d6a33c>] ? scsi_request_fn+0x343/0x47a [scsi_mod]
[ 341.753607] [<c1131da3>] ? __generic_unplug_device+0x23/0x25
[ 341.759410] [<c11323a4>] ? __make_request+0x364/0x3d9
[ 341.764612] [<c10066dc>] ? check_events+0x8/0xc
[ 341.769290] [<c1130f81>] ? generic_make_request+0x266/0x2b4
[ 341.775009] [<c1131fd1>] ? generic_unplug_device+0x2c/0x2e
[ 341.780643] [<c112b558>] ? blk_unplug+0x2e/0x31
[ 341.785323] [<f1d1ad12>] ? flush_pending_writes+0x58/0x74 [raid1]
[ 341.791562] [<f1d1adf3>] ? raid1d+0x61/0xccc [raid1]
[ 341.796676] [<c1007c85>] ? __switch_to+0x124/0x141
[ 341.801616] [<c1032342>] ? finish_task_switch+0x3c/0x95
[ 341.806989] [<c128d196>] ? schedule+0x78f/0x7dc
[ 341.811668] [<c1005fb4>] ? xen_force_evtchn_callback+0xc/0x10
[ 341.817562] [<c10066d3>] ? xen_restore_fl_direct_end+0x0/0x1
[ 341.823369] [<c128e2f9>] ? _spin_unlock_irqrestore+0xd/0xf
[ 341.829003] [<c104241a>] ? try_to_del_timer_sync+0x4f/0x56
[ 341.834634] [<c104242b>] ? del_timer_sync+0xa/0x14
[ 341.839574] [<c128d512>] ? schedule_timeout+0x89/0xb0
[ 341.844802] [<c10424d3>] ? process_timeout+0x0/0x5
[ 341.849743] [<c1005fb4>] ? xen_force_evtchn_callback+0xc/0x10
[ 341.855636] [<c10066dc>] ? check_events+0x8/0xc
[ 341.860318] [<f1e75050>] ? md_thread+0xe1/0xf8 [md_mod]
[ 341.865691] [<c104b0ea>] ? autoremove_wake_function+0x0/0x2d
[ 341.871497] [<f1e74f6f>] ? md_thread+0x0/0xf8 [md_mod]
[ 341.876782] [<c104aeb8>] ? kthread+0x61/0x66
[ 341.881202] [<c104ae57>] ? kthread+0x0/0x66
[ 341.885536] [<c1009a67>] ? kernel_thread_helper+0x7/0x10
[ 341.890993] Code: 08 89 eb 8b 7c 24 28 eb 48 8b 7c 24 28 e9 a9 00 00 00 8b 44 24 04 83 fb 01 8b 88 14 02 00 00 75 06 8b 54 24 10 eb 04 8b 54 24 24 <0b> 56 08 89 f8 ff 76 10 4b ff 76 0c ff d1 58 89 f0 5a e8 7d ac
[ 341.909887] EIP: [<f1ddb0a4>] _scsih_qcmd+0x412/0x4d0 [mpt2sas] SS:ESP 0069:f010bd64
[ 341.917686] CR2: 0000000000000008
[ 341.921069] ---[ end trace 884a3f22e680b4d4 ]---
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-xen-686 (SMP w/24 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
xen-hypervisor-4.0-amd64 depends on no packages.
Versions of packages xen-hypervisor-4.0-amd64 recommends:
ii xen-utils-4.0 4.0.1-1 XEN administrative tools
Versions of packages xen-hypervisor-4.0-amd64 suggests:
pn xen-docs-4.0 <none> (no description available)
-- no debconf information
More information about the Pkg-xen-devel
mailing list