[Pkg-xen-devel] Bug#810070: Bug#810070: XEN Hypervisor crashes/reboots at Startup after "Scrubbing Free Ram"
Ian Campbell
ijc at debian.org
Wed Jan 20 11:11:51 UTC 2016
Control: tag -1 +upstream
On Wed, 2016-01-06 at 08:36 +0000, Wolf Karsten Dietz wrote:
> Package: xen-hypervisor-4.4-amd64
> Version: 4.4.1-9+deb8u3
> Severity: grave
>
> Hello,
> I am trying to install the XEN Hypervisor on a Debian Jessie Server.
> When I am booting without the Hypervisor, everything works fine, but
> when I am Booting WITH the XEN-Hypervisor, then System crashes /
> reboots after the "Scrubbing Free RAM" Message without any
> Error-message, just a blank screen.
Thanks for your report.
I don't think we are going to be able to resolve this within Debian. Would
you mind reporting this to upstream please:
http://wiki.xen.org/wiki/Reporting_Bugs_against_Xen
We could forward it but I expect there will need to be some back and forth
with the maintainers so ti makes sense for you to speak to them directly.
You can CC 810070 at bugs.debian.org to keep this bug in the loop.
If possible it might be interesting to first try the 4.6 hypervisor in
Stretch, I suspect the xen-hypervisor-4.6-amd64 package will just install
on Jessie with no issues since it has no dependencies and you don't need
the userspace tools just to check if it boots.
Ian.
>
> Technical Data of the Server:
> CPU: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz (with VT-x)
> MEMORY: 64GB RAM (Memtest reports no Errors)
> HDD: SSD as Software-Raid
>
> Debian-Version: 8.2 (Jessie) with all Updates
> System/Dom0-Kernel: 3.16.7-ckt20-1 / 3.16+63
> I have also tried the Kernels from Backports: 4.2.6-3-bpo8+2 and
> 4.3.3-2-bpo8+1 ... makes no difference
>
> According to other Bug-reports, etc. in the Internet I tried to set
> Parameters in the Grub-Command-line (/etc/default/grub :
> GRUB_CMDLINE_XEN_DEFAULT) followed by an update-grub everytime:
>
> dom0_mem : different Values between 512M,max:512M and 64G,max:64G ( At
> the beginning in Steps of 256M and at the end in Steps of 2G) ...
> makes no difference
> mem : diffent Values between 512M and 64G ( like dom0_mem or a little
> bit higher) ... makes no difference
> dom0_max_vcpus=1 dom0_vcpus_pin : with and without .... makes no
> difference
> no-bootscrub : with or without ... the only difference is that the
> Scubbing Free RAM Message and the dots afterwards are disappearing ...
> the crash/reboot is happening at the same Position
> noreboot: with or without ... no difference ... with the System hangs
> with a blank screen and needs a hardware-reset ... without the System
> is rebooting after the Blank Screen
> acpi=ht|off or without ... makes no difference
> loglvl=all guest_loglvl=all ... no other messages seen
>
> The Server is in a Data-Center, so I have no physical access to it and
> i cannot put something like a serial console on it. I have only some
> Videos from the Remote VGA-Utility of the boot-Sequenz. In all Videos
> the Screen gets black after the Message of reported VCPUs and the
> Scrubbing Free RAM.
>
> dmesg from a normal Startup without XEN-Hypervisor (this time the
> 4.3-kernel ... if other Kernel needed please ask):
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Initializing cgroup subsys cpuacct
> [ 0.000000] Linux version 4.3.0-0.bpo.1-amd64
> (debian-kernel at lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10)
> ) #1 SMP Debian 4.3.3-2~bpo8+1 (2015-12-23)
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.3.0-0.bpo.1-amd64
> root=UUID=fc273ce0-6e58-4b9f-9cec-5d625697326c ro nomodeset
> [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
> [ 0.000000] x86/fpu: xstate_offset[3]: 03c0, xstate_sizes[3]: 0040
> [ 0.000000] x86/fpu: xstate_offset[4]: 0400, xstate_sizes[4]: 0040
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating
> point registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds
> registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
> [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is
> 0x440 bytes, using 'standard' format.
> [ 0.000000] x86/fpu: Using 'eager' FPU context switches.
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf873fff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x00000000bf874000-0x00000000bf874fff]
> ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000bf875000-0x00000000bf8befff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000bf8bf000-0x00000000c2f53fff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x00000000c2f54000-0x00000000c3e6cfff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000c3e6d000-0x00000000c3e97fff]
> ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000c3e98000-0x00000000c7b8bfff]
> ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000c7b8c000-0x00000000c7ffdfff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000c7ffe000-0x00000000c7ffefff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x00000000c8000000-0x00000000c80fffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000010317fffff]
> usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 3.0 present.
> [ 0.000000] DMI: FUJITSU D3401-H1/D3401-H1, BIOS V5.0.0.11
> R1.7.0.SR.2 for D3401-H1x 11/25/2015
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] e820: last_pfn = 0x1031800 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: write-back
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
> [ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable
> [ 0.000000] 2 base 00CC000000 mask 7FFC000000 uncachable
> [ 0.000000] 3 base 00CA000000 mask 7FFE000000 uncachable
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] 8 disabled
> [ 0.000000] 9 disabled
> [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC-
> WT
> [ 0.000000] e820: last_pfn = 0xc7fff max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [mem 0x000fcb60-0x000fcb6f]
> mapped at [ffff8800000fcb60]
> [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size
> 24576
> [ 0.000000] Using GB pages for direct mapping
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x01d38000, 0x01d38fff] PGTABLE
> [ 0.000000] BRK [0x01d39000, 0x01d39fff] PGTABLE
> [ 0.000000] BRK [0x01d3a000, 0x01d3afff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x1031600000-0x10317fffff]
> [ 0.000000] [mem 0x1031600000-0x10317fffff] page 2M
> [ 0.000000] BRK [0x01d3b000, 0x01d3bfff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x1020000000-0x10315fffff]
> [ 0.000000] [mem 0x1020000000-0x10315fffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x1000000000-0x101fffffff]
> [ 0.000000] [mem 0x1000000000-0x101fffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf873fff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
> [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
> [ 0.000000] [mem 0x80000000-0xbf7fffff] page 2M
> [ 0.000000] [mem 0xbf800000-0xbf873fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xbf8bf000-0xc2f53fff]
> [ 0.000000] [mem 0xbf8bf000-0xbf9fffff] page 4k
> [ 0.000000] [mem 0xbfa00000-0xc2dfffff] page 2M
> [ 0.000000] [mem 0xc2e00000-0xc2f53fff] page 4k
> [ 0.000000] BRK [0x01d3c000, 0x01d3cfff] PGTABLE
> [ 0.000000] BRK [0x01d3d000, 0x01d3dfff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0xc7ffe000-0xc7ffefff]
> [ 0.000000] [mem 0xc7ffe000-0xc7ffefff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0xfffffffff]
> [ 0.000000] [mem 0x100000000-0xfffffffff] page 1G
> [ 0.000000] RAMDISK: [mem 0x35db2000-0x36ed0fff]
> [ 0.000000] ACPI: Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 FUJ )
> [ 0.000000] ACPI: XSDT 0x00000000C3E710A0 0000BC (v01 FUJ
> D3401-H1 10700000 AMI 00010013)
> [ 0.000000] ACPI: FACP 0x00000000C3E8CEA8 00010C (v05 FUJ
> D3401-H1 10700000 AMI 00010013)
> [ 0.000000] ACPI: DSDT 0x00000000C3E711E8 01BCC0 (v02 FUJ
> D3401-H1 10700000 INTL 20120913)
> [ 0.000000] ACPI: FACS 0x00000000C7B8BF80 000040
> [ 0.000000] ACPI: APIC 0x00000000C3E8CFB8 0000BC (v03 FUJ
> D3401-H1 10700000 AMI 00010013)
> [ 0.000000] ACPI: FPDT 0x00000000C3E8D078 000044 (v01 FUJ
> D3401-H1 10700000 AMI 00010013)
> [ 0.000000] ACPI: FIDT 0x00000000C3E8D0C0 00009C (v01 FUJ
> D3401-H1 10700000 AMI 00010013)
> [ 0.000000] ACPI: MCFG 0x00000000C3E8D160 00003C (v01 FUJ
> D3401-H1 10700000 MSFT 00000097)
> [ 0.000000] ACPI: HPET 0x00000000C3E8D1A0 000038 (v01 FUJ
> D3401-H1 10700000 AMI. 0005000B)
> [ 0.000000] ACPI: SSDT 0x00000000C3E8D1D8 0003C5 (v01 SataRe
> SataTabl 00001000 INTL 20120913)
> [ 0.000000] ACPI: LPIT 0x00000000C3E8D5A0 000094 (v01 INTEL SKL
> 00000000 MSFT 0000005F)
> [ 0.000000] ACPI: SSDT 0x00000000C3E8D638 000248 (v02 INTEL
> sensrhub 00000000 INTL 20120913)
> [ 0.000000] ACPI: SSDT 0x00000000C3E8D880 002BAE (v02 INTEL
> PtidDevc 00001000 INTL 20120913)
> [ 0.000000] ACPI: SSDT 0x00000000C3E90430 000BE3 (v02 INTEL
> Ther_Rvp 00001000 INTL 20120913)
> [ 0.000000] ACPI: SSDT 0x00000000C3E91018 0006DC (v02 INTEL
> USB_MAP 00000000 INTL 20120913)
> [ 0.000000] ACPI: DBGP 0x00000000C3E916F8 000034 (v01 INTEL
> 00000000 MSFT 0000005F)
> [ 0.000000] ACPI: DBG2 0x00000000C3E91730 000054 (v00 INTEL
> 00000000 MSFT 0000005F)
> [ 0.000000] ACPI: SSDT 0x00000000C3E91788 004C13 (v02 SaSsdt SaSsdt
> 00003000 INTL 20120913)
> [ 0.000000] ACPI: UEFI 0x00000000C3E963A0 000042 (v01
> 00000000 00000000)
> [ 0.000000] ACPI: SSDT 0x00000000C3E963E8 000E6E (v02 CpuRef
> CpuSsdt 00003000 INTL 20120913)
> [ 0.000000] ACPI: DMAR 0x00000000C3E97258 0000A8 (v01 INTEL SKL
> 00000001 INTL 00000001)
> [ 0.000000] ACPI: ASF! 0x00000000C3E97300 0000A5 (v32 INTEL HCG
> 00000001 TFSM 000F4240)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-
> 0x00000010317fffff]
> [ 0.000000] NODE_DATA(0) allocated [mem 0x10317f9000-0x10317fcfff]
> [ 0.000000] [ffffea0000000000-ffffea0040dfffff] PMD ->
> [ffff880ff0e00000-ffff881030dfffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
> [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
> [ 0.000000] Normal [mem 0x0000000100000000-0x00000010317fffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
> [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf873fff]
> [ 0.000000] node 0: [mem 0x00000000bf8bf000-0x00000000c2f53fff]
> [ 0.000000] node 0: [mem 0x00000000c7ffe000-0x00000000c7ffefff]
> [ 0.000000] node 0: [mem 0x0000000100000000-0x00000010317fffff]
> [ 0.000000] Initmem setup node 0 [mem
> 0x0000000000001000-0x00000010317fffff]
> [ 0.000000] On node 0 totalpages: 16729765
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3995 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 12413 pages used for memmap
> [ 0.000000] DMA32 zone: 794378 pages, LIFO batch:31
> [ 0.000000] Normal zone: 248928 pages used for memmap
> [ 0.000000] Normal zone: 15931392 pages, LIFO batch:31
> [ 0.000000] Reserving Intel graphics stolen memory at 0xca800000-
> 0xcc7fffff
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
> 0-119
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
> level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf874000-0xbf874fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf875000-0xbf8befff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xc2f54000-0xc3e6cfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xc3e6d000-0xc3e97fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xc3e98000-0xc7b8bfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xc7b8c000-0xc7ffdfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xc7fff000-0xc7ffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xc8000000-0xc80fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xc8100000-0xca7fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xca800000-0xcc7fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xcc800000-0xf7ffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
> [ 0.000000] e820: [mem 0xcc800000-0xf7ffffff] available for PCI
> devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
> max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
> [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
> nr_cpu_ids:8 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff881031400000 s94168
> r8192 d28712 u262144
> [ 0.000000] pcpu-alloc: s94168 r8192 d28712 u262144 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
> Total pages: 16468339
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line:
> BOOT_IMAGE=/vmlinuz-4.3.0-0.bpo.1-amd64
> root=UUID=fc273ce0-6e58-4b9f-9cec-5d625697326c ro nomodeset
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -
> bailing!
> [ 0.000000] Memory: 65771928K/66919060K available (5674K kernel
> code, 1118K rwdata, 2792K rodata, 1300K init, 844K bss, 1147132K
> reserved, 0K cma-reserved)
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] Build-time adjustment of leaf fanout to 64.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to
> nr_cpu_ids=8.
> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64,
> nr_cpu_ids=8
> [ 0.000000] NR_IRQS:33024 nr_irqs:2048 16
> [ 0.000000] spurious 8259A interrupt: IRQ7.
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 79635855245 ns
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Unable to calibrate against PIT
> [ 0.000000] tsc: using HPET reference calibration
> [ 0.000000] tsc: Detected 3408.306 MHz processor
> [ 0.000018] Calibrating delay loop (skipped), value calculated
> using timer frequency.. 6816.61 BogoMIPS (lpj=13633224)
> [ 0.000168] pid_max: default: 32768 minimum: 301
> [ 0.000240] ACPI: Core revision 20150818
> [ 0.015096] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace
> lookup failure, AE_NOT_FOUND (20150818/dswload-210)
> [ 0.015389] ACPI Exception: AE_NOT_FOUND, During name
> lookup/catalog (20150818/psobject-227)
> [ 0.015578] ACPI Exception: AE_NOT_FOUND, (SSDT:USB_MAP ) while
> loading table (20150818/tbxfload-193)
> [ 0.021094] ACPI Error: 1 table load failures, 7 successful
> (20150818/tbxfload-214)
> [ 0.021293] Security Framework initialized
> [ 0.021370] Yama: disabled by default; enable with sysctl
> kernel.yama.*
> [ 0.021446] AppArmor: AppArmor disabled by boot time parameter
> [ 0.024014] Dentry cache hash table entries: 8388608 (order: 14,
> 67108864 bytes)
> [ 0.031840] Inode-cache hash table entries: 4194304 (order: 13,
> 33554432 bytes)
> [ 0.036171] Mount-cache hash table entries: 131072 (order: 8,
> 1048576 bytes)
> [ 0.036294] Mountpoint-cache hash table entries: 131072 (order: 8,
> 1048576 bytes)
> [ 0.036676] Initializing cgroup subsys io
> [ 0.036756] Initializing cgroup subsys memory
> [ 0.036826] Initializing cgroup subsys devices
> [ 0.036894] Initializing cgroup subsys freezer
> [ 0.036962] Initializing cgroup subsys net_cls
> [ 0.037030] Initializing cgroup subsys perf_event
> [ 0.037099] Initializing cgroup subsys net_prio
> [ 0.037184] CPU: Physical Processor ID: 0
> [ 0.037260] CPU: Processor Core ID: 0
> [ 0.037329] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> [ 0.037399] ENERGY_PERF_BIAS: View and update with
> x86_energy_perf_policy(8)
> [ 0.038303] mce: CPU supports 10 MCE banks
> [ 0.038391] CPU0: Thermal monitoring enabled (TM1)
> [ 0.038475] process: using mwait in idle threads
> [ 0.038548] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
> [ 0.038616] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
> [ 0.038903] Freeing SMP alternatives memory: 20K (ffffffff81c5e000
> - ffffffff81c63000)
> [ 0.046535] ftrace: allocating 23606 entries in 93 pages
> [ 0.052507] DMAR: Host address width 39
> [ 0.052584] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
> [ 0.052657] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap
> 1c0000c40660462 ecap 7e3ff0505e
> [ 0.052748] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
> [ 0.052819] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap
> d2008c40660462 ecap f050da
> [ 0.052905] DMAR: RMRR base: 0x000000c3be7000 end: 0x000000c3c06fff
> [ 0.052976] DMAR: RMRR base: 0x000000ca000000 end: 0x000000cc7fffff
> [ 0.053047] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
> [ 0.053118] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
> [ 0.053188] DMAR-IR: Queued invalidation will be enabled to support
> x2apic and Intr-remapping.
> [ 0.054629] DMAR-IR: Enabled IRQ remapping in x2apic mode
> [ 0.054700] x2apic enabled
> [ 0.054774] Switched APIC routing to cluster x2apic.
> [ 0.058838] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.098549] TSC deadline timer enabled
> [ 0.098553] smpboot: CPU0: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz
> (family: 0x6, model: 0x5e, stepping: 0x3)
> [ 0.098789] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake
> events, full-width counters, Intel PMU driver.
> [ 0.099104] ... version: 4
> [ 0.099171] ... bit width: 48
> [ 0.099238] ... generic registers: 4
> [ 0.099304] ... value mask: 0000ffffffffffff
> [ 0.099373] ... max period: 0000ffffffffffff
> [ 0.099442] ... fixed-purpose events: 3
> [ 0.099508] ... event mask: 000000070000000f
> [ 0.099906] x86: Booting SMP configuration:
> [ 0.099983] .... node #0, CPUs: #1
> [ 0.113986] NMI watchdog: enabled on all CPUs, permanently consumes
> one hw-PMU counter.
> [ 0.114206] #2 #3 #4 #5 #6 #7
> [ 0.197878] x86: Booted up 1 node, 8 CPUs
> [ 0.198039] smpboot: Total of 8 processors activated (54532.89
> BogoMIPS)
> [ 0.204136] devtmpfs: initialized
> [ 0.204254] memory block size : 128MB
> [ 0.208885] PM: Registering ACPI NVS region [mem
> 0xbf874000-0xbf874fff] (4096 bytes)
> [ 0.208994] PM: Registering ACPI NVS region [mem
> 0xc3e98000-0xc7b8bfff] (63913984 bytes)
> [ 0.209770] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 7645041785100000 ns
> [ 0.209934] pinctrl core: initialized pinctrl subsystem
> [ 0.210623] NET: Registered protocol family 16
> [ 0.219965] cpuidle: using governor ladder
> [ 0.229807] cpuidle: using governor menu
> [ 0.229961] ACPI: bus type PCI registered
> [ 0.230039] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.230176] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
> 0xf8000000-0xfbffffff] (base 0xf8000000)
> [ 0.230268] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in
> E820
> [ 0.230344] PCI: Using configuration type 1 for base access
> [ 0.240367] ACPI: Added _OSI(Module Device)
> [ 0.240446] ACPI: Added _OSI(Processor Device)
> [ 0.240514] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.240583] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.245203] ACPI: Executed 21 blocks of module-level executable AML
> code
> [ 0.249767] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> [ 0.252051] ACPI: Dynamic OEM Table Load:
> [ 0.252214] ACPI: SSDT 0xFFFF880FE9ADA400 00037F (v02 PmRef
> Cpu0Cst 00003001 INTL 20120913)
> [ 0.252950] ACPI: Dynamic OEM Table Load:
> [ 0.253131] ACPI: SSDT 0xFFFF880FE9AD2000 0006E4 (v02 PmRef
> Cpu0Ist 00003000 INTL 20120913)
> [ 0.254686] ACPI: Dynamic OEM Table Load:
> [ 0.254843] ACPI: SSDT 0xFFFF880FF08B0800 0005AA (v02 PmRef ApIst
> 00003000 INTL 20120913)
> [ 0.255674] ACPI: Dynamic OEM Table Load:
> [ 0.255833] ACPI: SSDT 0xFFFF880FE9B28C00 000119 (v02 PmRef ApCst
> 00003000 INTL 20120913)
> [ 0.259762] ACPI: Interpreter enabled
> [ 0.259844] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
> State [\_S1_] (20150818/hwxface-580)
> [ 0.260030] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
> State [\_S2_] (20150818/hwxface-580)
> [ 0.260223] ACPI: (supports S0 S3 S4 S5)
> [ 0.260300] ACPI: Using IOAPIC for interrupt routing
> [ 0.260391] PCI: Using host bridge windows from ACPI; if necessary,
> use "pci=nocrs" and report a bug
> [ 0.261751] ACPI: Power Resource [PG00] (on)
> [ 0.263261] ACPI: Power Resource [WRST] (off)
> [ 0.263575] ACPI: Power Resource [WRST] (off)
> [ 0.263886] ACPI: Power Resource [WRST] (off)
> [ 0.264200] ACPI: Power Resource [WRST] (off)
> [ 0.264510] ACPI: Power Resource [WRST] (off)
> [ 0.264822] ACPI: Power Resource [WRST] (off)
> [ 0.265133] ACPI: Power Resource [WRST] (off)
> [ 0.265443] ACPI: Power Resource [WRST] (off)
> [ 0.265752] ACPI: Power Resource [WRST] (off)
> [ 0.266063] ACPI: Power Resource [WRST] (off)
> [ 0.266374] ACPI: Power Resource [WRST] (off)
> [ 0.266684] ACPI: Power Resource [WRST] (off)
> [ 0.266993] ACPI: Power Resource [WRST] (off)
> [ 0.267303] ACPI: Power Resource [WRST] (off)
> [ 0.267614] ACPI: Power Resource [WRST] (off)
> [ 0.267925] ACPI: Power Resource [WRST] (off)
> [ 0.268236] ACPI: Power Resource [WRST] (off)
> [ 0.268547] ACPI: Power Resource [WRST] (off)
> [ 0.268856] ACPI: Power Resource [WRST] (off)
> [ 0.269166] ACPI: Power Resource [WRST] (off)
> [ 0.273053] ACPI: Power Resource [FN00] (off)
> [ 0.273187] ACPI: Power Resource [FN01] (off)
> [ 0.273320] ACPI: Power Resource [FN02] (off)
> [ 0.273452] ACPI: Power Resource [FN03] (off)
> [ 0.273583] ACPI: Power Resource [FN04] (off)
> [ 0.274351] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
> [ 0.274434] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
> ClockPM Segments MSI]
> [ 0.275799] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME
> AER PCIeCapability]
> [ 0.276305] PCI host bridge to bus 0000:00
> [ 0.276376] pci_bus 0000:00: root bus resource [bus 00-3e]
> [ 0.276446] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7
> window]
> [ 0.276517] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff
> window]
> [ 0.276589] pci_bus 0000:00: root bus resource [mem
> 0x000a0000-0x000bffff window]
> [ 0.276674] pci_bus 0000:00: root bus resource [mem
> 0xce800000-0xf7ffffff window]
> [ 0.276760] pci_bus 0000:00: root bus resource [mem
> 0xfd000000-0xfe7fffff window]
> [ 0.276849] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
> [ 0.276927] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
> [ 0.276935] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff
> 64bit]
> [ 0.276939] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff
> 64bit pref]
> [ 0.276942] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
> [ 0.277080] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
> [ 0.277103] pci 0000:00:14.0: reg 0x10: [mem 0xf7020000-0xf702ffff
> 64bit]
> [ 0.277144] pci 0000:00:14.0: PME# supported from D3hot D3cold
> [ 0.277217] pci 0000:00:14.0: System wakeup disabled by ACPI
> [ 0.277322] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
> [ 0.277344] pci 0000:00:14.2: reg 0x10: [mem 0xf703a000-0xf703afff
> 64bit]
> [ 0.277457] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
> [ 0.277486] pci 0000:00:16.0: reg 0x10: [mem 0xf7039000-0xf7039fff
> 64bit]
> [ 0.277531] pci 0000:00:16.0: PME# supported from D3hot
> [ 0.277634] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
> [ 0.277652] pci 0000:00:17.0: reg 0x10: [mem 0xf7034000-0xf7035fff]
> [ 0.277657] pci 0000:00:17.0: reg 0x14: [mem 0xf7038000-0xf70380ff]
> [ 0.277663] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
> [ 0.277668] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
> [ 0.277674] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
> [ 0.277680] pci 0000:00:17.0: reg 0x24: [mem 0xf7037000-0xf70377ff]
> [ 0.277700] pci 0000:00:17.0: PME# supported from D3hot
> [ 0.277801] pci 0000:00:1f.0: [8086:a148] type 00 class 0x060100
> [ 0.277967] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
> [ 0.277978] pci 0000:00:1f.2: reg 0x10: [mem 0xf7030000-0xf7033fff]
> [ 0.278104] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
> [ 0.278156] pci 0000:00:1f.4: reg 0x10: [mem 0xf7036000-0xf70360ff
> 64bit]
> [ 0.278225] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
> [ 0.278370] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
> [ 0.278402] pci 0000:00:1f.6: reg 0x10: [mem 0xf7000000-0xf701ffff]
> [ 0.278478] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
> [ 0.278547] pci 0000:00:1f.6: System wakeup disabled by ACPI
> [ 0.279721] ACPI: PCI Interrupt Link [LNKA] (IRQs 6 10 *11 12 14 15)
> [ 0.280141] ACPI: PCI Interrupt Link [LNKB] (IRQs 6 *10 11 12 14 15)
> [ 0.280559] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 10 *11 12 14 15)
> [ 0.280979] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 10 *11 12 14 15)
> [ 0.281397] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 10 *11 12 14 15)
> [ 0.281817] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 10 *11 12 14 15)
> [ 0.282235] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 10 *11 12 14 15)
> [ 0.282655] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 10 *11 12 14 15)
> [ 0.283265] ACPI: Enabled 5 GPEs in block 00 to 7F
> [ 0.283465] vgaarb: setting as boot device: PCI:0000:00:02.0
> [ 0.283544] vgaarb: device added:
> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.283630] vgaarb: loaded
> [ 0.283695] vgaarb: bridge control possible 0000:00:02.0
> [ 0.283825] PCI: Using ACPI for IRQ routing
> [ 0.290893] PCI: pci_cache_line_size set to 64 bytes
> [ 0.290922] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
> [ 0.290923] e820: reserve RAM buffer [mem 0xbf874000-0xbfffffff]
> [ 0.290924] e820: reserve RAM buffer [mem 0xc2f54000-0xc3ffffff]
> [ 0.290925] e820: reserve RAM buffer [mem 0xc7fff000-0xc7ffffff]
> [ 0.290925] e820: reserve RAM buffer [mem 0x1031800000-0x1033ffffff]
> [ 0.291048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> [ 0.291461] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
> [ 0.293571] clocksource: Switched to clocksource hpet
> [ 0.297169] pnp: PnP ACPI init
> [ 0.297380] system 00:00: [io 0x0a00-0x0a0f] has been reserved
> [ 0.297461] system 00:00: [io 0x0a10-0x0a1f] has been reserved
> [ 0.297531] system 00:00: [io 0x0a20-0x0a2f] has been reserved
> [ 0.297619] system 00:00: [io 0x0a30-0x0a3f] has been reserved
> [ 0.297691] system 00:00: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 0.297844] pnp 00:01: Plug and Play ACPI device, IDs PNP0303
> PNP030b (active)
> [ 0.297924] system 00:02: [io 0x0400-0x041f] has been reserved
> [ 0.298005] system 00:02: [io 0x0680-0x069f] has been reserved
> [ 0.298075] system 00:02: [io 0xffff] has been reserved
> [ 0.298145] system 00:02: [io 0xffff] has been reserved
> [ 0.298214] system 00:02: [io 0xffff] has been reserved
> [ 0.298284] system 00:02: [io 0x1800-0x18fe] could not be reserved
> [ 0.298355] system 00:02: [io 0x164e-0x164f] has been reserved
> [ 0.298425] system 00:02: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 0.298474] system 00:03: [io 0x0800-0x087f] has been reserved
> [ 0.298555] system 00:03: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 0.298566] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.298586] system 00:05: [io 0x1854-0x1857] has been reserved
> [ 0.298667] system 00:05: Plug and Play ACPI device, IDs INT3f0d
> PNP0c02 (active)
> [ 0.298792] system 00:06: [mem 0xfed10000-0xfed17fff] has been
> reserved
> [ 0.298874] system 00:06: [mem 0xfed18000-0xfed18fff] has been
> reserved
> [ 0.298945] system 00:06: [mem 0xfed19000-0xfed19fff] has been
> reserved
> [ 0.299929] system 00:06: [mem 0xf8000000-0xfbffffff] has been
> reserved
> [ 0.300000] system 00:06: [mem 0xfed20000-0xfed3ffff] has been
> reserved
> [ 0.300072] system 00:06: [mem 0xfed90000-0xfed93fff] could not be
> reserved
> [ 0.300203] system 00:06: [mem 0xfed45000-0xfed8ffff] has been
> reserved
> [ 0.300274] system 00:06: [mem 0xff000000-0xffffffff] has been
> reserved
> [ 0.300346] system 00:06: [mem 0xfee00000-0xfeefffff] could not be
> reserved
> [ 0.300418] system 00:06: [mem 0xf7fe0000-0xf7ffffff] has been
> reserved
> [ 0.300490] system 00:06: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 0.300511] system 00:07: [mem 0xfd000000-0xfdabffff] has been
> reserved
> [ 0.300593] system 00:07: [mem 0xfdad0000-0xfdadffff] has been
> reserved
> [ 0.300665] system 00:07: [mem 0xfdb00000-0xfdffffff] has been
> reserved
> [ 0.300736] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be
> reserved
> [ 0.300808] system 00:07: [mem 0xfe036000-0xfe03bfff] has been
> reserved
> [ 0.300880] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been
> reserved
> [ 0.300952] system 00:07: [mem 0xfe410000-0xfe7fffff] has been
> reserved
> [ 0.301023] system 00:07: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 0.301186] system 00:08: [io 0xff00-0xfffe] has been reserved
> [ 0.301266] system 00:08: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 0.301929] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been
> reserved
> [ 0.302011] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been
> reserved
> [ 0.302083] system 00:09: [mem 0xfdac0000-0xfdacffff] has been
> reserved
> [ 0.302155] system 00:09: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 0.302530] pnp: PnP ACPI: found 10 devices
> [ 0.311981] clocksource: acpi_pm: mask: 0xffffff max_cycles:
> 0xffffff, max_idle_ns: 2085701024 ns
> [ 0.312074] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
> [ 0.312075] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
> [ 0.312076] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
> window]
> [ 0.312077] pci_bus 0000:00: resource 7 [mem 0xce800000-0xf7ffffff
> window]
> [ 0.312078] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff
> window]
> [ 0.312517] NET: Registered protocol family 2
> [ 0.312927] TCP established hash table entries: 524288 (order: 10,
> 4194304 bytes)
> [ 0.313432] TCP bind hash table entries: 65536 (order: 8, 1048576
> bytes)
> [ 0.313627] TCP: Hash tables configured (established 524288 bind
> 65536)
> [ 0.313751] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
> [ 0.313958] UDP-Lite hash table entries: 32768 (order: 8, 1048576
> bytes)
> [ 0.314282] NET: Registered protocol family 1
> [ 0.314378] pci 0000:00:02.0: Video device with shadowed ROM
> [ 0.314417] PCI: CLS 0 bytes, default 64
> [ 0.314442] Unpacking initramfs...
> [ 0.512570] Freeing initrd memory: 17532K (ffff880035db2000 -
> ffff880036ed1000)
> [ 0.512681] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.512762] software IO TLB [mem 0xbb874000-0xbf874000] (64MB)
> mapped at [ffff8800bb874000-ffff8800bf873fff]
> [ 0.513037] microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x55
> [ 0.513124] microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x55
> [ 0.513216] microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x55
> [ 0.513385] microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x55
> [ 0.513464] microcode: CPU4 sig=0x506e3, pf=0x2, revision=0x55
> [ 0.513566] microcode: CPU5 sig=0x506e3, pf=0x2, revision=0x55
> [ 0.513656] microcode: CPU6 sig=0x506e3, pf=0x2, revision=0x55
> [ 0.513735] microcode: CPU7 sig=0x506e3, pf=0x2, revision=0x55
> [ 0.513875] microcode: Microcode Update Driver: v2.00
> <tigran at aivazian.fsnet.co.uk>, Peter Oruba
> [ 0.514322] futex hash table entries: 2048 (order: 5, 131072 bytes)
> [ 0.514496] audit: initializing netlink subsys (disabled)
> [ 0.514609] audit: type=2000 audit(1452064404.512:1): initialized
> [ 0.515003] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.515090] zbud: loaded
> [ 0.515346] VFS: Disk quotas dquot_6.6.0
> [ 0.515523] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
> bytes)
> [ 0.516494] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 250)
> [ 0.516826] io scheduler noop registered
> [ 0.516941] io scheduler deadline registered
> [ 0.517066] io scheduler cfq registered (default)
> [ 0.517291] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.517404] pciehp: PCI Express Hot Plug Controller Driver version:
> 0.4
> [ 0.517487] intel_idle: MWAIT substates: 0x142120
> [ 0.517488] intel_idle: v0.4 model 0x5E
> [ 0.517488] intel_idle: lapic_timer_reliable_states 0xffffffff
> [ 0.517877] GHES: HEST is not enabled!
> [ 0.518033] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.518623] Linux agpgart interface v0.103
> [ 0.518729] AMD IOMMUv2 driver by Joerg Roedel <jroedel at suse.de>
> [ 0.518809] AMD IOMMUv2 functionality not available on this system
> [ 0.519479] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64
> irq 1
> [ 0.519561] i8042: PNP: PS/2 appears to have AUX port disabled, if
> this is incorrect please boot with i8042.nopnp
> [ 0.522261] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.522628] mousedev: PS/2 mouse device common for all mice
> [ 0.523014] rtc_cmos 00:04: RTC can wake from S4
> [ 0.523530] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
> [ 0.523701] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes
> nvram, hpet irqs
> [ 0.523792] Intel P-state driver initializing.
> [ 0.523868] intel_pstate: HWP enabled
> [ 0.524475] intel_pstate: HWP enabled
> [ 0.525076] intel_pstate: HWP enabled
> [ 0.525647] intel_pstate: HWP enabled
> [ 0.526106] intel_pstate: HWP enabled
> [ 0.526503] intel_pstate: HWP enabled
> [ 0.526898] intel_pstate: HWP enabled
> [ 0.527293] intel_pstate: HWP enabled
> [ 0.527750] ledtrig-cpu: registered to indicate activity on CPUs
> [ 0.528891] NET: Registered protocol family 10
> [ 0.529677] mip6: Mobile IPv6
> [ 0.529810] NET: Registered protocol family 17
> [ 0.529885] mpls_gso: MPLS GSO support
> [ 0.531168] registered taskstats version 1
> [ 0.531265] zswap: loaded using pool lzo/zbud
> [ 0.532666] rtc_cmos 00:04: setting system clock to 2016-01-06
> 07:13:25 UTC (1452064405)
> [ 0.532812] PM: Hibernation image not present or could not be loaded.
> [ 0.533405] Freeing unused kernel memory: 1300K (ffffffff81b19000 -
> ffffffff81c5e000)
> [ 0.533502] Write protecting the kernel read-only data: 10240k
> [ 0.534345] Freeing unused kernel memory: 460K (ffff88000158d000 -
> ffff880001600000)
> [ 0.534978] Freeing unused kernel memory: 1304K (ffff8800018ba000 -
> ffff880001a00000)
> [ 0.558231] systemd-udevd[99]: starting version 215
> [ 0.558458] random: systemd-udevd urandom read with 11 bits of
> entropy available
> [ 0.567054] hidraw: raw HID events driver (C) Jiri Kosina
> [ 0.578630] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace
> lookup failure, AE_NOT_FOUND (20150818/psargs-359)
> [ 0.579618] ACPI Error: Method parse/execution failed
> [\_TZ.TZ00._TMP] (Node ffff880ff0910f40), AE_NOT_FOUND
> (20150818/psparse-542)
> [ 0.580547] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace
> lookup failure, AE_NOT_FOUND (20150818/psargs-359)
> [ 0.580974] ACPI Error: Method parse/execution failed
> [\_TZ.TZ00._TMP] (Node ffff880ff0910f40)
> [ 0.581328] pps_core: LinuxPPS API ver. 1 registered
> [ 0.581328] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
> Rodolfo Giometti <giometti at linux.it>
> [ 0.581659] , AE_NOT_FOUND
> [ 0.581832] (20150818/psparse-542)
> [ 0.582021] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace
> lookup failure, AE_NOT_FOUND (20150818/psargs-359)
> [ 0.582556] ACPI Error: Method parse/execution failed
> [ 0.582646] PTP clock support registered
> [ 0.582694] SCSI subsystem initialized
> [ 0.583077] [\_TZ.TZ01._TMP] (Node ffff880ff0910e78)
> [ 0.583485] , AE_NOT_FOUND (20150818/psparse-542)
> [ 0.583749] ACPI Error:
> [ 0.583770] ACPI: bus type USB registered
> [ 0.583784] usbcore: registered new interface driver usbfs
> [ 0.583789] usbcore: registered new interface driver hub
> [ 0.583818] usbcore: registered new device driver usb
> [ 0.584479] [\_SB_.PCI0.LPCB.H_EC.ECAV]
> [ 0.584678] Namespace lookup failure, AE_NOT_FOUND (20150818/psargs-
> 359)
> [ 0.584887] ACPI Error: Method parse/execution failed
> [\_TZ.TZ01._TMP] (Node ffff880ff0910e78)
> [ 0.585104] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
> [ 0.585104] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
> [ 0.585694] , AE_NOT_FOUND
> [ 0.585892] (20150818/psparse-542)
> [ 0.586066] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace
> lookup failure, AE_NOT_FOUND
> [ 0.586392] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input0
> [ 0.586658] (20150818/psargs-359)
> [ 0.586910] ACPI Error: Method parse/execution failed
> [ 0.587205] libata version 3.00 loaded.
> [ 0.587289] [\_TZ.FNCL] (Node ffff880ff0910220)
> [ 0.587640] , AE_NOT_FOUND (20150818/psparse-542)
> [ 0.588058] ACPI Error: Method parse/execution failed
> [\_TZ.FN00._ON] (Node ffff880ff0910810), AE_NOT_FOUND
> (20150818/psparse-542)
> [ 0.589584] e1000e 0000:00:1f.6: Interrupt Throttling Rate
> (ints/sec) set to dynamic conservative mode
> [ 0.590122] acpi PNP0C0B:00: Failed to change power state to D0
> [ 0.597456] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace
> lookup failure, AE_NOT_FOUND (20150818/psargs-359)
> [ 0.598215] ACPI Error: Method parse/execution failed [\_TZ.FNCL]
> (Node ffff880ff0910220), AE_NOT_FOUND (20150818/psparse-542)
> [ 0.599195] ACPI Error: Method parse/execution failed
> [\_TZ.FN00._ON] (Node ffff880ff0910810), AE_NOT_FOUND
> (20150818/psparse-542)
> [ 0.600140] acpi PNP0C0B:00: Setting initial power state
> [ 0.625331] acpi PNP0C0B:00: Cannot transition from (unknown) to D3hot
> [ 0.633381] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace
> lookup failure, AE_NOT_FOUND (20150818/psargs-359)
> [ 0.633659] ACPI Error: Method parse/execution failed [\_TZ.FNCL]
> (Node ffff880ff0910220), AE_NOT_FOUND (20150818/psparse-542)
> [ 0.633973] ACPI Error: Method parse/execution failed
> [\_TZ.FN01._ON] (Node ffff880ff09106d0), AE_NOT_FOUND
> (20150818/psparse-542)
> [ 0.634295] acpi PNP0C0B:01: Failed to change power state to D0
> [ 0.641543] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace
> lookup failure, AE_NOT_FOUND (20150818/psargs-359)
> [ 0.641823] ACPI Error: Method parse/execution failed [\_TZ.FNCL]
> (Node ffff880ff0910220), AE_NOT_FOUND (20150818/psparse-542)
> [ 0.642142] ACPI Error: Method parse/execution failed
> [\_TZ.FN01._ON] (Node ffff880ff09106d0), AE_NOT_FOUND
> (20150818/psparse-542)
> [ 0.642465] acpi PNP0C0B:01: Setting initial power state
> [ 0.661232] acpi PNP0C0B:01: Cannot transition from (unknown) to D3hot
> [ 0.669363] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace
> lookup failure, AE_NOT_FOUND (20150818/psargs-359)
> [ 0.669644] ACPI Error: Method parse/execution failed [\_TZ.FNCL]
> (Node ffff880ff0910220), AE_NOT_FOUND (20150818/psparse-542)
> [ 0.669962] ACPI Error: Method parse/execution failed
> [\_TZ.FN02._ON] (Node ffff880ff0910590), AE_NOT_FOUND
> (20150818/psparse-542)
> [ 0.670289] acpi PNP0C0B:02: Failed to change power state to D0
> [ 0.677206] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace
> lookup failure, AE_NOT_FOUND (20150818/psargs-359)
> [ 0.679157] ACPI Error: Method parse/execution failed [\_TZ.FNCL]
> (Node ffff880ff0910220), AE_NOT_FOUND (20150818/psparse-542)
> [ 0.679533] ACPI Error: Method parse/execution failed
> [\_TZ.FN02._ON] (Node ffff880ff0910590), AE_NOT_FOUND
> (20150818/psparse-542)
> [ 0.680092] acpi PNP0C0B:02: Setting initial power state
> [ 0.689229] acpi PNP0C0B:02: Cannot transition from (unknown) to D3hot
> [ 0.697334] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace
> lookup failure, AE_NOT_FOUND (20150818/psargs-359)
> [ 0.697619] ACPI Error: Method parse/execution failed [\_TZ.FNCL]
> (Node ffff880ff0910220), AE_NOT_FOUND (20150818/psparse-542)
> [ 0.697942] ACPI Error: Method parse/execution failed
> [\_TZ.FN03._ON] (Node ffff880ff0910450), AE_NOT_FOUND
> (20150818/psparse-542)
> [ 0.698270] acpi PNP0C0B:03: Failed to change power state to D0
> [ 0.705318] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace
> lookup failure, AE_NOT_FOUND (20150818/psargs-359)
> [ 0.705601] ACPI Error: Method parse/execution failed [\_TZ.FNCL]
> (Node ffff880ff0910220), AE_NOT_FOUND (20150818/psparse-542)
> [ 0.705925] ACPI Error: Method parse/execution failed
> [\_TZ.FN03._ON] (Node ffff880ff0910450), AE_NOT_FOUND
> (20150818/psparse-542)
> [ 0.706254] acpi PNP0C0B:03: Setting initial power state
> [ 0.717148] acpi PNP0C0B:03: Cannot transition from (unknown) to D3hot
> [ 0.725297] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace
> lookup failure, AE_NOT_FOUND (20150818/psargs-359)
> [ 0.725582] ACPI Error: Method parse/execution failed [\_TZ.FNCL]
> (Node ffff880ff0910220), AE_NOT_FOUND (20150818/psparse-542)
> [ 0.725904] ACPI Error: Method parse/execution failed
> [\_TZ.FN04._ON] (Node ffff880ff0910310), AE_NOT_FOUND
> (20150818/psparse-542)
> [ 0.726230] acpi PNP0C0B:04: Failed to change power state to D0
> [ 0.733087] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace
> lookup failure, AE_NOT_FOUND (20150818/psargs-359)
> [ 0.733364] ACPI Error: Method parse/execution failed [\_TZ.FNCL]
> (Node ffff880ff0910220), AE_NOT_FOUND (20150818/psparse-542)
> [ 0.733680] ACPI Error: Method parse/execution failed
> [\_TZ.FN04._ON] (Node ffff880ff0910310), AE_NOT_FOUND
> (20150818/psparse-542)
> [ 0.733998] acpi PNP0C0B:04: Setting initial power state
> [ 0.745104] acpi PNP0C0B:04: Cannot transition from (unknown) to D3hot
> [ 0.761672] e1000e 0000:00:1f.6 eth0: registered PHC clock
> [ 0.761806] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width
> x1) 90:1b:0e:8b:2a:52
> [ 0.761917] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network
> Connection
> [ 0.762035] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No:
> FFFFFF-0FF
> [ 0.762571] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 0.762697] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
> bus number 1
> [ 0.763987] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci
> version 0x100 quirks 0x00109810
> [ 0.764110] xhci_hcd 0000:00:14.0: cache line size of 64 is not
> supported
> [ 0.764679] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 0.764800] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.765163] usb usb1: Product: xHCI Host Controller
> [ 0.765251] usb usb1: Manufacturer: Linux 4.3.0-0.bpo.1-amd64 xhci-hcd
> [ 0.765339] usb usb1: SerialNumber: 0000:00:14.0
> [ 0.765821] hub 1-0:1.0: USB hub found
> [ 0.766002] hub 1-0:1.0: 12 ports detected
> [ 0.779682] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 0.779785] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
> bus number 2
> [ 0.779937] usb usb2: New USB device found, idVendor=1d6b,
> idProduct=0003
> [ 0.780036] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.780143] usb usb2: Product: xHCI Host Controller
> [ 0.780226] usb usb2: Manufacturer: Linux 4.3.0-0.bpo.1-amd64 xhci-hcd
> [ 0.780313] usb usb2: SerialNumber: 0000:00:14.0
> [ 0.780604] hub 2-0:1.0: USB hub found
> [ 0.780732] hub 2-0:1.0: 6 ports detected
> [ 0.787628] ahci 0000:00:17.0: version 3.0
> [ 0.801146] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 5 ports 6
> Gbps 0x3e impl SATA mode
> [ 0.801271] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo
> only pio slum part ems deso sadm sds apst
> [ 0.834334] scsi host0: ahci
> [ 0.835080] scsi host1: ahci
> [ 0.835852] scsi host2: ahci
> [ 0.836459] scsi host3: ahci
> [ 0.837156] scsi host4: ahci
> [ 0.837750] scsi host5: ahci
> ... just messages about Disks, etc. following
>
> With this BUG the Servers gets unusable for me ...
>
> Kind Regards
> Karsten Dietz
> _______________________________________________
> Pkg-xen-devel mailing list
> Pkg-xen-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-xen-devel
More information about the Pkg-xen-devel
mailing list