[Pkg-xen-devel] Bug#810379: [Xen-devel] [BUG] pci-passthrough generates "xen:events: Failed to obtain physical IRQ" for some devices
Tommi Airikka
tommi at airikka.net
Sat Jan 30 13:18:58 UTC 2016
On Wed, Jan 27, 2016 at 7:30 PM, Konrad Rzeszutek Wilk <
konrad.wilk at oracle.com> wrote:
> On Sat, Jan 23, 2016 at 05:12:04PM +0100, Tommi Airikka wrote:
> > Xen developers,
> >
> > After an upgrade of my Debian Jessie dom0 and domUs, my passthroughed
> > NIC stopped working.
> > This bug was probably introduced in Debian Jessie sometime
> > between 2015-12-30 and 2016-01-08 as 2015-12-30 as 2015-12-30 was the
> > last time I upgraded without any problems according to my dpkg.log.
>
> This upgrade looks to only have upgraded the hypervisor?
>
> As in I see:
>
> domU "bug" "uname -a":
> Linux bug 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u2 (2016-01-02)
> x86_64 GNU/Linux
>
> domU "working" "uname -a":
> Linux working 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u2
> (2016-01-02) x86_64 GNU/Linux
>
> So same version? What was the earlier version of the hypervisor?
>
I forgot to mention that I use apt-dater to upgrade both dom0 and domUs at
the same time. domU "bug" was created for debugging purposes just a couple
of hours after I used apt-dater and realized that there's something wrong
with the pci passthrough. domU "bug" and domU "working" should have
relatively similar software state.
According to dom0 dpkg.log, the xen-hypervisor-4.4-amd64 (version
"4.4.1-9+deb8u3") has been untouched since 2015-12-21.
linux-image-3.16.0-4-amd64 was upgraded from "3.16.7-ckt20-1+deb8u1" to
"3.16.7-ckt20-1+deb8u2" at the point of time when pci passthrough stopped
working.
>
> The Xen version you have says:
> > (XEN) I/O virtualisation disabled
>
> Which is not very healthy for PCI passthrough. Albeit you can do
> it with PV without IOMMU. Did the previous version of Xen have the same
> message?
>
I downgraded linux-image on dom0:
dpkg -i linux-image-3.16.0-4-amd64_3.16.7-ckt20-1+deb8u1_amd64.deb
and now the pci passthrough seems to work!
dom0 'uname -a':
Linux dom0 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u1 (2015-12-14)
x86_64 GNU/Linux
domU bug 'uname -a':
Linux bug 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u2 (2016-01-02)
x86_64 GNU/Linux
But I still have the "(XEN) I/O virtualisation disabled".
dom0 'xl dmesg':
(XEN) Xen version 4.4.1 (Debian 4.4.1-9+deb8u3) (ultrotter at debian.org) (gcc
(Debian 4.9.2-10) 4.9.2) debug=n Wed Nov 25 15:46:22 EET 2015
(XEN) Bootloader: GRUB 2.02~beta2-22+deb8u1
(XEN) Command line: placeholder dom0_mem=1024M,max:1024M
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 4 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 0000000000099800 (usable)
(XEN) 0000000000099800 - 0000000000099c00 (reserved)
(XEN) 000000000009e000 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000f1de4000 (usable)
(XEN) 00000000f1de4000 - 00000000f1dee000 (ACPI data)
(XEN) 00000000f1dee000 - 00000000f8000000 (reserved)
(XEN) 00000000fec00000 - 00000000fee10000 (reserved)
(XEN) 00000000ff800000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000028bfff000 (usable)
(XEN) ACPI: RSDP 000F4F00, 0024 (r2 HP )
(XEN) ACPI: XSDT F1DE6400, 00B4 (r1 HP ProLiant 2 � 162E)
(XEN) ACPI: FACP F1DE6540, 00F4 (r3 HP ProLiant 2 � 162E)
(XEN) ACPI: DSDT F1DE6640, 1C1A (r1 HP DSDT 1 INTL 20030228)
(XEN) ACPI: FACS F1DE4140, 0040
(XEN) ACPI: SPCR F1DE4180, 0050 (r1 HP SPCRRBSU 1 � 162E)
(XEN) ACPI: MCFG F1DE4200, 003C (r1 HP ProLiant 1 0)
(XEN) ACPI: HPET F1DE4240, 0038 (r1 HP ProLiant 2 � 162E)
(XEN) ACPI: FFFF F1DE4280, 0064 (r2 HP ProLiant 2 � 162E)
(XEN) ACPI: SPMI F1DE4300, 0040 (r5 HP ProLiant 1 � 162E)
(XEN) ACPI: ERST F1DE4340, 0230 (r1 HP ProLiant 1 � 162E)
(XEN) ACPI: APIC F1DE4580, 0252 (r1 HP ProLiant 2 0)
(XEN) ACPI: FFFF F1DE4800, 0176 (r1 HP ProLiant 1 � 162E)
(XEN) ACPI: BERT F1DE4980, 0030 (r1 HP ProLiant 1 � 162E)
(XEN) ACPI: HEST F1DE49C0, 00BC (r1 HP ProLiant 1 � 162E)
(XEN) ACPI: FFFF F1DE4A80, 1914 (r1 HP ProLiant 1 � 162E)
(XEN) ACPI: FFFF F1DE63C0, 002D (r1 HP ProLiant 1 0)
(XEN) ACPI: SSDT F1DE8280, 0137 (r3 HP CRSPCI0 2 HP 1)
(XEN) ACPI: SSDT F1DE83C0, 0177 (r3 HP riser0 2 INTL 20030228)
(XEN) ACPI: SSDT F1DE8540, 01E1 (r1 HP pcc 1 INTL 20090625)
(XEN) ACPI: SSDT F1DE8740, 0377 (r1 HP pmab 1 INTL 20090625)
(XEN) ACPI: SSDT F1DE8AC0, 0504 (r1 INTEL PPM RCM 80000001 INTL 20061109)
(XEN) System RAM: 10205MB (10450416kB)
(XEN) Domain heap initialised
(XEN) Processor #0 7:10 APIC version 21
(XEN) Processor #2 7:10 APIC version 21
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2294.859 MHz processor.
(XEN) Initing memory sharing.
(XEN) xstate_init: using cntxt_size: 0x240 and states: 0x3
(XEN) I/O virtualisation disabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB
(XEN) Brought up 2 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1f18000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000023c000000->0000000240000000 (241836 pages to
be allocated)
(XEN) Init. ramdisk: 000000028aeac000->000000028bdff9af
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81f18000
(XEN) Init. ramdisk: ffffffff81f18000->ffffffff82e6b9af
(XEN) Phys-Mach map: ffffffff82e6c000->ffffffff8306c000
(XEN) Start info: ffffffff8306c000->ffffffff8306c4b4
(XEN) Page tables: ffffffff8306d000->ffffffff8308a000
(XEN) Boot stack: ffffffff8308a000->ffffffff8308b000
(XEN) TOTAL: ffffffff80000000->ffffffff83400000
(XEN) ENTRY ADDRESS: ffffffff819021f0
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM:
..........................................................................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input
to Xen)
(XEN) Freed 284kB init memory.
(XEN) mm.c:812: d13: Forcing read-only access to MFN fbff1
(XEN) mm.c:812: d13: Forcing read-only access to MFN fbff1
(XEN) mm.c:812: d13: Forcing read-only access to MFN fbff1
(XEN) mm.c:812: d0: Forcing read-only access to MFN fbff1
(XEN) mm.c:812: d13: Forcing read-only access to MFN faba0
(XEN) mm.c:812: d0: Forcing read-only access to MFN faba0
domU "bug" 'dmesg':
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel at lists.debian.org)
(gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u2
(2016-01-02)
[ 0.000000] Command line: root=/dev/xvda2 ro elevator=noop
root=/dev/xvda2 ro
[ 0.000000] ACPI in unprivileged domain disabled
[ 0.000000] 1-1 mapping on 8000->100000
[ 0.000000] Set 1015808 page(s) to 1-1 mapping
[ 0.000000] 1-1 mapping on 100000->8000000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x0000000007ffffff] usable
[ 0.000000] Xen: [mem 0x0000000008000000-0x00000000f1de3fff] unusable
[ 0.000000] Xen: [mem 0x00000000f1de4000-0x00000000f1dedfff] ACPI data
[ 0.000000] Xen: [mem 0x00000000f1dee000-0x00000000f7ffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x8000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x07e00000-0x07ffffff]
[ 0.000000] [mem 0x07e00000-0x07ffffff] page 4k
[ 0.000000] BRK [0x01b02000, 0x01b02fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x04000000-0x07dfffff]
[ 0.000000] [mem 0x04000000-0x07dfffff] page 4k
[ 0.000000] BRK [0x01b03000, 0x01b03fff] PGTABLE
[ 0.000000] BRK [0x01b04000, 0x01b04fff] PGTABLE
[ 0.000000] BRK [0x01b05000, 0x01b05fff] PGTABLE
[ 0.000000] BRK [0x01b06000, 0x01b06fff] PGTABLE
[ 0.000000] BRK [0x01b07000, 0x01b07fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x03ffffff]
[ 0.000000] [mem 0x00100000-0x03ffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x01f18000-0x049bffff]
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
[ 0.000000] NODE_DATA [mem 0x07fe7000-0x07febfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x07ffffff]
[ 0.000000] On node 0 totalpages: 32671
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 392 pages used for memmap
[ 0.000000] DMA32 zone: 28672 pages, LIFO batch:7
[ 0.000000] SFI: Simple Firmware Interface v0.81
http://simplefirmware.org
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] e820: [mem 0xf8000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.4.1 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880007c00000 s80896 r8192
d21504 u2097152
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 32202
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/xvda2 ro elevator=noop
root=/dev/xvda2 ro
[ 0.000000] PID hash table entries: 512 (order: 0, 4096 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 72968K/130684K available (5219K kernel code, 947K
rwdata, 1836K rodata, 1204K init, 840K bss, 57716K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 2294.858 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4589.71 BogoMIPS (lpj=9179432)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] Security Framework initialized
[ 0.004000] AppArmor: AppArmor disabled by boot time parameter
[ 0.004000] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.004000] Dentry cache hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.004000] Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004000] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.004000] Mountpoint-cache hash table entries: 512 (order: 0, 4096
bytes)
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] Initializing cgroup subsys blkio
[ 0.004000] Initializing cgroup subsys perf_event
[ 0.004000] Initializing cgroup subsys net_prio
[ 0.004000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[ 0.025772] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 -
ffffffff81a20000)
[ 0.028385] ftrace: allocating 21679 entries in 85 pages
[ 0.036140] Performance Events: unsupported p6 CPU model 58 no PMU
driver, software events only.
[ 0.037591] x86: Booted up 1 node, 1 CPUs
[ 0.037647] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.037724] devtmpfs: initialized
[ 0.041230] pinctrl core: initialized pinctrl subsystem
[ 0.041317] NET: Registered protocol family 16
[ 0.041334] xen:grant_table: Grant tables using version 1 layout
[ 0.041353] Grant table initialized
[ 0.041615] PCI: setting up Xen PCI frontend stub
[ 0.041615] PCI: pci_cache_line_size set to 64 bytes
[ 0.041615] ACPI: Interpreter disabled.
[ 0.041615] xen:balloon: Initialising balloon driver
[ 0.044041] xen_balloon: Initialising balloon driver
[ 0.044067] vgaarb: loaded
[ 0.044134] PCI: System does not support PCI
[ 0.044138] PCI: System does not support PCI
[ 0.044274] Switched to clocksource xen
[ 0.049387] pnp: PnP ACPI: disabled
[ 0.053177] NET: Registered protocol family 2
[ 0.053357] TCP established hash table entries: 1024 (order: 1, 8192
bytes)
[ 0.053368] TCP bind hash table entries: 1024 (order: 2, 16384 bytes)
[ 0.053373] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.053389] TCP: reno registered
[ 0.053394] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.053402] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.053439] NET: Registered protocol family 1
[ 0.053454] PCI: CLS 0 bytes, default 64
[ 0.053501] Unpacking initramfs...
[ 0.091622] Freeing initrd memory: 43680K (ffff880001f18000 -
ffff8800049c0000)
[ 0.093485] platform rtc_cmos: registered platform RTC device (no PNP
device found)
[ 0.093788] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32
Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.093845] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x19
[ 0.093925] microcode: Microcode Update Driver: v2.00 <
tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 0.094168] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.094197] audit: initializing netlink subsys (disabled)
[ 0.094217] audit: type=2000 audit(1454158364.375:1): initialized
[ 0.094532] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.094557] zbud: loaded
[ 0.094700] VFS: Disk quotas dquot_6.5.2
[ 0.094714] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.094771] msgmni has been set to 227
[ 0.095221] alg: No test for stdrng (krng)
[ 0.095249] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 0.095292] io scheduler noop registered (default)
[ 0.095297] io scheduler deadline registered
[ 0.095324] io scheduler cfq registered
[ 0.095389] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.095407] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.095437] intel_idle: does not run on family 6 model 58
[ 0.095735] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.095989] Linux agpgart interface v0.103
[ 0.096104] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.270619] i8042: No controller found
[ 1.270793] mousedev: PS/2 mouse device common for all mice
[ 1.348656] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.348710] rtc_cmos: probe of rtc_cmos failed with error -38
[ 1.348741] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.348760] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel at amd.com>
[ 1.348763] AMD IOMMUv2 functionality not available on this system
[ 1.348859] TCP: cubic registered
[ 1.348876] NET: Registered protocol family 10
[ 1.349056] mip6: Mobile IPv6
[ 1.349064] NET: Registered protocol family 17
[ 1.349073] mpls_gso: MPLS GSO support
[ 1.349080] mce: Unable to init device /dev/mcelog (rc: -5)
[ 1.349225] registered taskstats version 1
[ 1.349283] xenbus_probe_frontend: Device with no driver:
device/vbd/51714
[ 1.349288] xenbus_probe_frontend: Device with no driver:
device/vbd/51713
[ 1.349291] xenbus_probe_frontend: Device with no driver: device/vif/0
[ 1.349294] xenbus_probe_frontend: Device with no driver: device/pci/0
[ 1.349331] rtc_hctosys: unable to open rtc device (rtc0)
[ 1.349380] PM: Hibernation image not present or could not be loaded.
[ 1.349896] Freeing unused kernel memory: 1204K (ffffffff818ee000 -
ffffffff81a1b000)
[ 1.349907] Write protecting the kernel read-only data: 8192k
[ 1.352430] Freeing unused kernel memory: 912K (ffff88000151c000 -
ffff880001600000)
[ 1.352541] Freeing unused kernel memory: 212K (ffff8800017cb000 -
ffff880001800000)
[ 1.372341] systemd-udevd[58]: starting version 215
[ 1.372888] random: systemd-udevd urandom read with 3 bits of entropy
available
[ 1.395569] xen_netfront: Initialising Xen virtual ethernet driver
[ 1.443740] blkfront: xvda2: flush diskcache: enabled; persistent
grants: enabled; indirect descriptors: enabled;
[ 1.445979] blkfront: xvda1: flush diskcache: enabled; persistent
grants: enabled; indirect descriptors: enabled;
[ 8.862010] EXT4-fs (xvda2): mounted filesystem with ordered data mode.
Opts: (null)
[ 9.351477] random: nonblocking pool is initialized
[ 10.447043] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 10.447128] systemd[1]: Detected virtualization 'xen'.
[ 10.447139] systemd[1]: Detected architecture 'x86-64'.
[ 10.912912] systemd[1]: Inserted module 'autofs4'
[ 10.971682] systemd[1]: Set hostname to <bug>.
[ 15.114090] systemd[1]: Cannot add dependency job for unit dbus.socket,
ignoring: Unit dbus.socket failed to load: No such file or directory.
[ 15.114125] systemd[1]: Cannot add dependency job for unit
display-manager.service, ignoring: Unit display-manager.service failed to
load: No such file or directory.
[ 15.114652] systemd[1]: Starting Forward Password Requests to Wall
Directory Watch.
[ 15.114803] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 15.114834] systemd[1]: Expecting device dev-hvc0.device...
[ 15.115023] systemd[1]: Starting Remote File Systems (Pre).
[ 15.115131] systemd[1]: Reached target Remote File Systems (Pre).
[ 15.115185] systemd[1]: Starting Arbitrary Executable File Formats File
System Automount Point.
[ 15.115422] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 15.115463] systemd[1]: Starting Dispatch Password Requests to Console
Directory Watch.
[ 15.115547] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 15.115571] systemd[1]: Starting Paths.
[ 15.115669] systemd[1]: Reached target Paths.
[ 15.115692] systemd[1]: Starting Encrypted Volumes.
[ 15.115785] systemd[1]: Reached target Encrypted Volumes.
[ 15.115808] systemd[1]: Expecting device dev-xvda1.device...
[ 15.115899] systemd[1]: Starting Root Slice.
[ 15.116040] systemd[1]: Created slice Root Slice.
[ 15.116064] systemd[1]: Starting User and Session Slice.
[ 15.116207] systemd[1]: Created slice User and Session Slice.
[ 15.116231] systemd[1]: Starting Delayed Shutdown Socket.
[ 15.116365] systemd[1]: Listening on Delayed Shutdown Socket.
[ 15.116389] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 15.116524] systemd[1]: Listening on /dev/initctl Compatibility Named
Pipe.
[ 15.116548] systemd[1]: Starting Journal Socket (/dev/log).
[ 15.116688] systemd[1]: Listening on Journal Socket (/dev/log).
[ 15.116721] systemd[1]: Starting udev Kernel Socket.
[ 15.116829] systemd[1]: Listening on udev Kernel Socket.
[ 15.116859] systemd[1]: Starting udev Control Socket.
[ 15.116970] systemd[1]: Listening on udev Control Socket.
[ 15.116997] systemd[1]: Starting Journal Socket.
[ 15.117135] systemd[1]: Listening on Journal Socket.
[ 15.117170] systemd[1]: Starting System Slice.
[ 15.117300] systemd[1]: Created slice System Slice.
[ 15.117341] systemd[1]: Starting File System Check on Root Device...
[ 15.118784] systemd[1]: Starting system-getty.slice.
[ 15.118980] systemd[1]: Created slice system-getty.slice.
[ 15.119005] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 15.119146] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 15.119224] systemd[1]: Starting Increase datagram queue length...
[ 15.120664] systemd[1]: Mounting POSIX Message Queue File System...
[ 15.315723] systemd[1]: Mounting Debug File System...
[ 15.376731] systemd[1]: Started Set Up Additional Binary Formats.
[ 15.376795] systemd[1]: Mounting Huge Pages File System...
[ 15.378081] systemd[1]: Starting Create list of required static device
nodes for the current kernel...
[ 15.422179] systemd[1]: Starting Load Kernel Modules...
[ 15.423348] systemd[1]: Starting udev Coldplug all Devices...
[ 15.424454] systemd[1]: Starting Slices.
[ 15.424548] systemd[1]: Reached target Slices.
[ 15.425330] systemd[1]: Started Increase datagram queue length.
[ 15.426545] systemd[1]: Starting Syslog Socket.
[ 15.426671] systemd[1]: Listening on Syslog Socket.
[ 15.426694] systemd[1]: Starting Sockets.
[ 15.426763] systemd[1]: Reached target Sockets.
[ 15.426783] systemd[1]: Starting Journal Service...
[ 15.429296] systemd[1]: Started Journal Service.
[ 16.279394] systemd-udevd[137]: starting version 215
[ 16.420090] EXT4-fs (xvda2): re-mounted. Opts: errors=remount-ro
[ 16.640700] systemd-journald[123]: Received request to flush runtime
journal from PID 1
[ 17.378097] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 17.384721] pcifront pci-0: Installing PCI frontend
[ 17.384741] xen:swiotlb_xen: Warning: only able to allocate 4 MB for
software IO TLB
[ 17.387512] software IO TLB [mem 0x02400000-0x02800000] (4MB) mapped at
[ffff880002400000-ffff8800027fffff]
[ 17.388459] pcifront pci-0: Creating PCI Frontend Bus 0000:00
[ 17.388562] pcifront pci-0: PCI host bridge to bus 0000:00
[ 17.388569] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 17.388573] pci_bus 0000:00: root bus resource [mem
0x00000000-0xfffffffff]
[ 17.388578] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 17.401449] pci 0000:00:01.0: [1912:0014] type 00 class 0x0c0330
[ 17.401911] pci 0000:00:01.0: reg 0x10: [mem 0xfbff0000-0xfbff1fff 64bit]
[ 17.431844] alg: No test for crc32 (crc32-pclmul)
[ 17.435526] pci 0000:00:00.1: [14e4:165f] type 00 class 0x020000
[ 17.435907] pci 0000:00:00.1: reg 0x10: [mem 0xfabc0000-0xfabcffff 64bit
pref]
[ 17.436227] pci 0000:00:00.1: reg 0x18: [mem 0xfabb0000-0xfabbffff 64bit
pref]
[ 17.436481] pci 0000:00:00.1: reg 0x20: [mem 0xfaba0000-0xfabaffff 64bit
pref]
[ 17.437994] pcifront pci-0: New device on 0000:00:00.1 found.
[ 17.439770] pcifront pci-0: claiming resource 0000:00:01.0/0
[ 17.439778] pcifront pci-0: claiming resource 0000:00:00.1/0
[ 17.439782] pcifront pci-0: claiming resource 0000:00:00.1/2
[ 17.439785] pcifront pci-0: claiming resource 0000:00:00.1/4
[ 17.439875] pci 0000:00:01.0: Xen PCI mapped GSI18 to IRQ29
[ 17.742850] intel_rapl: Found RAPL domain package
[ 17.742864] intel_rapl: Found RAPL domain core
[ 18.330425] pps_core: LinuxPPS API ver. 1 registered
[ 18.330438] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giometti at linux.it>
[ 18.335293] PTP clock support registered
[ 18.382328] tg3.c:v3.137 (May 11, 2014)
[ 18.383508] tg3 0000:00:00.1: Xen PCI mapped GSI17 to IRQ30
[ 18.394807] usbcore: registered new interface driver usbfs
[ 18.395074] usbcore: registered new interface driver hub
[ 18.395796] usbcore: registered new device driver usb
[ 18.413270] tg3 0000:00:00.1 eth1: Tigon3 [partno(N/A) rev 5720000] (PCI
Express) MAC address 34:64:a9:9a:a8:b1
[ 18.413288] tg3 0000:00:00.1 eth1: attached PHY is 5720C
(10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 18.413297] tg3 0000:00:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0]
ASF[1] TSOcap[1]
[ 18.413304] tg3 0000:00:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
[ 18.430176] xen:events: xen_bind_pirq_gsi_to_irq: returning irq 29 for
gsi 18
[ 18.430192] xhci_hcd 0000:00:01.0: Xen PCI mapped GSI18 to IRQ29
[ 18.434698] xhci_hcd 0000:00:01.0: xHCI Host Controller
[ 18.434723] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus
number 1
[ 18.445842] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 18.445856] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 18.445862] usb usb1: Product: xHCI Host Controller
[ 18.445867] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 18.445872] usb usb1: SerialNumber: 0000:00:01.0
[ 18.449363] hub 1-0:1.0: USB hub found
[ 18.449392] hub 1-0:1.0: 2 ports detected
[ 18.449530] xhci_hcd 0000:00:01.0: xHCI Host Controller
[ 18.449540] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus
number 2
[ 18.450543] usb usb2: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 18.450584] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 18.450591] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 18.450596] usb usb2: Product: xHCI Host Controller
[ 18.450602] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 18.450606] usb usb2: SerialNumber: 0000:00:01.0
[ 18.450904] hub 2-0:1.0: USB hub found
[ 18.450925] hub 2-0:1.0: 2 ports detected
[ 18.532710] Adding 262140k swap on /dev/xvda1. Priority:-1 extents:1
across:262140k SSFS
> Looking at the code (in Linux) I see:
> 516 /* NB. We are happy to share unless we are probing. */
> 517 bind_pirq.flags = info->u.pirq.flags & PIRQ_SHAREABLE ?
> 518 BIND_PIRQ__WILL_SHARE : 0;
> 519 rc = HYPERVISOR_event_channel_op(EVTCHNOP_bind_pirq,
> &bind_pirq);
> 520 if (rc != 0) {
> 521 pr_warn("Failed to obtain physical IRQ %d\n", irq);
> 522 return 0;
> 523 }
>
> It would be nice if I we had included the return code :-(
>
> Anyhow for PV guests in the hypervisor there is a check:
> 414 if ( !is_hvm_domain(d) && !pirq_access_permitted(d, pirq) )
> 415 return -EPERM;
> 416
>
> And I wonder if the XEN_DOMCTL_irq_permission aka, xc_domain_irq_permission
> had been called. I remember that at some point we missed it for Xend..
>
> Could you enable Xend debugging (if you are using that):
>
I'm using xl. Is there a similar setting for that?
>
> export XEND_DEBUG=1
> /etc/init.d/xend start
>
> And try starting the guest. Then grep in /var/log/xen/xend.log for
> "pci: enabling irq "
>
> You should see 18, 17 and 21.
>
> Also if you do 'xl debug-keys i && xl dmesg'
>
> You should see that the IRQ 17, 18, 21 are assigned to the domain.
> ?
>
Br,
Tommi Airikka
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/pkg-xen-devel/attachments/20160130/3140c0c7/attachment-0001.html>
More information about the Pkg-xen-devel
mailing list