[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-21+xen0) (Ian.Campbell@citrix.com) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Mon Aug 30 11:57:03 UTC 2010 [ 0.000000] Command line: placeholder root=/dev/mapper/root--volume-host--root ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] xen_release_chunk: looking at area pfn c0000-f0000: 196608 pages freed [ 0.000000] xen_release_chunk: looking at area pfn f4000-f4c7f: 3199 pages freed [ 0.000000] released 199807 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] Xen: 000000000009d800 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 00000000bfeb0000 (usable) [ 0.000000] Xen: 00000000bfeb0000 - 00000000bfecc000 (ACPI data) [ 0.000000] Xen: 00000000bfecc000 - 00000000bff00000 (ACPI NVS) [ 0.000000] Xen: 00000000bff00000 - 00000000c0000000 (reserved) [ 0.000000] Xen: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] Xen: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] Xen: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] Xen: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0xbfeb0 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfeb0000 [ 0.000000] 0000000000 - 00bfeb0000 page 4k [ 0.000000] kernel direct mapping tables up to bfeb0000 @ 100000-704000 [ 0.000000] RAMDISK: 016b1000 - 031dae00 [ 0.000000] ACPI: RSDP 00000000000f69b0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000bfebb27e 0008C (v01 LENOVO TP-7K 00002290 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bfebb400 000F4 (v03 LENOVO TP-7K 00002290 LNVO 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526) [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557) [ 0.000000] ACPI: DSDT 00000000bfebb81d 1044C (v01 LENOVO TP-7K 00002290 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bfee4000 00040 [ 0.000000] ACPI: SSDT 00000000bfebb5b4 00269 (v01 LENOVO TP-7K 00002290 MSFT 03000000) [ 0.000000] ACPI: ECDT 00000000bfecbc69 00052 (v01 LENOVO TP-7K 00002290 LNVO 00000001) [ 0.000000] ACPI: TCPA 00000000bfecbcbb 00032 (v02 LENOVO TP-7K 00002290 LNVO 00000001) [ 0.000000] ACPI: APIC 00000000bfecbced 00068 (v01 LENOVO TP-7K 00002290 LNVO 00000001) [ 0.000000] ACPI: MCFG 00000000bfecbd55 0003C (v01 LENOVO TP-7K 00002290 LNVO 00000001) [ 0.000000] ACPI: HPET 00000000bfecbd91 00038 (v01 LENOVO TP-7K 00002290 LNVO 00000001) [ 0.000000] ACPI: SLIC 00000000bfecbe62 00176 (v01 LENOVO TP-7K 00002290 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bfecbfd8 00028 (v01 LENOVO TP-7K 00002290 LTP 00000001) [ 0.000000] ACPI: SSDT 00000000bfee26d9 0025F (v01 LENOVO TP-7K 00002290 INTL 20050513) [ 0.000000] ACPI: SSDT 00000000bfee2938 000A6 (v01 LENOVO TP-7K 00002290 INTL 20050513) [ 0.000000] ACPI: SSDT 00000000bfee29de 004F7 (v01 LENOVO TP-7K 00002290 INTL 20050513) [ 0.000000] ACPI: SSDT 00000000bfee2ed5 001D8 (v01 LENOVO TP-7K 00002290 INTL 20050513) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad R61 [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000bfeb0000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000bfeb0000 [ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff] [ 0.000000] bootmap [0000000000010000 - 0000000000027fd7] pages 18 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00bfeb0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0003983000 - 00039a4000] XEN PAGETABLES ==> [0003983000 - 00039a4000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001690954] TEXT DATA BSS ==> [0001000000 - 0001690954] [ 0.000000] #4 [00016b1000 - 00031dae00] RAMDISK ==> [00016b1000 - 00031dae00] [ 0.000000] #5 [00031db000 - 0003983000] XEN START INFO ==> [00031db000 - 0003983000] [ 0.000000] #6 [0001691000 - 000169114c] BRK ==> [0001691000 - 000169114c] [ 0.000000] #7 [0000100000 - 00006e0000] PGTABLE ==> [0000100000 - 00006e0000] [ 0.000000] found SMP MP-table at [ffff8800000f69e0] f69e0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000bfeb0 [ 0.000000] On node 0 totalpages: 785997 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1507 pages reserved [ 0.000000] DMA zone: 2434 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10692 pages used for memmap [ 0.000000] DMA32 zone: 771308 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 256 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.1-rc6 (preserve-AD) (dom0) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff8800039da000 s90328 r8192 d24360 u122880 [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] trying to map vcpu_info 0 at ffff8800039e5020, mfn 13b9e5, offset 32 [ 0.000000] cpu 0 using vcpu_info at ffff8800039e5020 [ 0.000000] trying to map vcpu_info 1 at ffff880003a03020, mfn 13ba03, offset 32 [ 0.000000] cpu 1 using vcpu_info at ffff880003a03020 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773742 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: placeholder root=/dev/mapper/root--volume-host--root ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff8800067bc000 - ffff88000a7bc000 [ 0.000000] DMA: software IO TLB at phys 0x67bc000 - 0xa7bc000 [ 0.000000] xen_swiotlb_fixup: buf=ffff8800067bc000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff88000a81c000 size=32768 [ 0.000000] Memory: 2985844k/3144384k available (3143k kernel code, 396k absent, 158144k reserved, 1887k data, 596k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:768 [ 0.000000] xen: --> irq=0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] alloc irq_desc for 767 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] Detected 1995.055 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.11 BogoMIPS (lpj=7980220) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004245] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.005363] Mount-cache hash table entries: 256 [ 0.005640] Initializing cgroup subsys ns [ 0.005711] Initializing cgroup subsys cpuacct [ 0.005779] Initializing cgroup subsys devices [ 0.005846] Initializing cgroup subsys freezer [ 0.005913] Initializing cgroup subsys net_cls [ 0.006022] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.006141] CPU: L2 cache: 4096K [ 0.006211] CPU 0/0x0 -> Node 0 [ 0.006278] CPU: Physical Processor ID: 0 [ 0.006346] CPU: Processor Core ID: 0 [ 0.006417] mce: CPU supports 6 MCE banks [ 0.006507] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only. [ 0.006706] SMP alternatives: switching to UP code [ 0.008000] ACPI: Core revision 20090903 [ 0.040076] alloc irq_desc for 766 on node 0 [ 0.040080] alloc kstat_irqs on node 0 [ 0.040092] alloc irq_desc for 765 on node 0 [ 0.040095] alloc kstat_irqs on node 0 [ 0.040102] alloc irq_desc for 764 on node 0 [ 0.040104] alloc kstat_irqs on node 0 [ 0.040110] alloc irq_desc for 763 on node 0 [ 0.040113] alloc kstat_irqs on node 0 [ 0.040364] installing Xen timer for CPU 1 [ 0.040434] alloc irq_desc for 762 on node 0 [ 0.040437] alloc kstat_irqs on node 0 [ 0.040473] SMP alternatives: switching to SMP code [ 0.044001] alloc irq_desc for 761 on node 0 [ 0.044001] alloc kstat_irqs on node 0 [ 0.044010] alloc irq_desc for 760 on node 0 [ 0.044013] alloc kstat_irqs on node 0 [ 0.044020] alloc irq_desc for 759 on node 0 [ 0.044022] alloc kstat_irqs on node 0 [ 0.044029] alloc irq_desc for 758 on node 0 [ 0.044031] alloc kstat_irqs on node 0 [ 0.004000] Initializing CPU#1 [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 1/0x0 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.044144] Brought up 2 CPUs [ 0.044601] CPU0 attaching sched-domain: [ 0.044605] domain 0: span 0-1 level CPU [ 0.044608] groups: 0 1 [ 0.044617] CPU1 attaching sched-domain: [ 0.044620] domain 0: span 0-1 level CPU [ 0.044624] groups: 1 0 [ 0.044705] devtmpfs: initialized [ 0.048480] Grant table initialized [ 0.048480] regulator: core version 0.5 [ 0.048480] NET: Registered protocol family 16 [ 0.048480] alloc irq_desc for 757 on node 0 [ 0.048480] alloc kstat_irqs on node 0 [ 0.048480] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.048480] ACPI: bus type pci registered [ 0.048480] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.048480] PCI: MCFG area at f0000000 reserved in E820 [ 0.066829] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.066896] PCI: Using configuration type 1 for base access [ 0.067573] bio: create slab at 0 [ 0.071283] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.071410] ACPI: EC: EC description table is found, configuring boot EC [ 0.085355] ACPI: BIOS _OSI(Linux) query honored via DMI [ 0.100184] ACPI: Interpreter enabled [ 0.100251] ACPI: (supports S0 S3 S4 S5) [ 0.100523] ACPI: Using IOAPIC for interrupt routing [ 0.116027] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 [ 0.116167] ACPI: Power Resource [PUBS] (on) [ 0.120176] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.120915] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.121291] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.121366] pci 0000:00:01.0: PME# disabled [ 0.121707] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe200000-0xfe21ffff] [ 0.121730] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe224000-0xfe224fff] [ 0.121752] pci 0000:00:19.0: reg 18 io port: [0x1800-0x181f] [ 0.121921] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.122001] pci 0000:00:19.0: PME# disabled [ 0.122238] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] [ 0.122448] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] [ 0.122651] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe225800-0xfe225bff] [ 0.122838] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.122918] pci 0000:00:1a.7: PME# disabled [ 0.123149] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe220000-0xfe223fff] [ 0.123352] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.123431] pci 0000:00:1b.0: PME# disabled [ 0.123804] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.123883] pci 0000:00:1c.0: PME# disabled [ 0.124001] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.124001] pci 0000:00:1c.1: PME# disabled [ 0.124001] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.124001] pci 0000:00:1c.2: PME# disabled [ 0.124263] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.124343] pci 0000:00:1c.3: PME# disabled [ 0.124725] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.124805] pci 0000:00:1c.4: PME# disabled [ 0.125083] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] [ 0.125294] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] [ 0.125504] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] [ 0.125731] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe225c00-0xfe225fff] [ 0.125938] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.126016] pci 0000:00:1d.7: PME# disabled [ 0.126603] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.126690] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.126764] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) [ 0.126850] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) [ 0.126938] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) [ 0.127175] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.127197] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.127219] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.127242] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.127264] pci 0000:00:1f.1: reg 20 io port: [0x18c0-0x18cf] [ 0.127505] pci 0000:00:1f.2: reg 10 io port: [0x18f8-0x18ff] [ 0.127528] pci 0000:00:1f.2: reg 14 io port: [0x18ec-0x18ef] [ 0.127550] pci 0000:00:1f.2: reg 18 io port: [0x18f0-0x18f7] [ 0.127572] pci 0000:00:1f.2: reg 1c io port: [0x18e8-0x18eb] [ 0.127595] pci 0000:00:1f.2: reg 20 io port: [0x1c00-0x1c1f] [ 0.127617] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe225000-0xfe2257ff] [ 0.127757] pci 0000:00:1f.2: PME# supported from D3hot [ 0.127834] pci 0000:00:1f.2: PME# disabled [ 0.127999] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe226000-0xfe2260ff] [ 0.128001] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f] [ 0.128001] pci 0000:01:00.0: reg 10 32bit mmio: [0xd6000000-0xd6ffffff] [ 0.128001] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.128001] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd4000000-0xd5ffffff] [ 0.128001] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f] [ 0.128001] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.128001] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.128001] pci 0000:00:01.0: bridge 32bit mmio: [0xd4000000-0xd6ffffff] [ 0.128001] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.128001] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] [ 0.128001] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] [ 0.128001] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff] [ 0.128001] pci 0000:03:00.0: reg 10 32bit mmio: [0xdf2ff000-0xdf2fffff] [ 0.128001] pci 0000:03:00.0: PME# supported from D0 D3hot [ 0.128001] pci 0000:03:00.0: PME# disabled [ 0.128001] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.128001] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff] [ 0.128001] pci 0000:00:1c.1: bridge 32bit mmio: [0xdc100000-0xdf2fffff] [ 0.128001] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfd00000-0xdfdfffff] [ 0.128001] pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff] [ 0.128001] pci 0000:00:1c.2: bridge 32bit mmio: [0xd8000000-0xd9ffffff] [ 0.128001] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdfa00000-0xdfafffff] [ 0.128001] pci 0000:00:1c.3: bridge io port: [0x6000-0x6fff] [ 0.128001] pci 0000:00:1c.3: bridge 32bit mmio: [0xd0000000-0xd1ffffff] [ 0.128001] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdf700000-0xdf7fffff] [ 0.128001] pci 0000:00:1c.4: bridge io port: [0x7000-0x7fff] [ 0.128001] pci 0000:00:1c.4: bridge 32bit mmio: [0xcc000000-0xcdffffff] [ 0.128001] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf400000-0xdf4fffff] [ 0.128001] pci 0000:15:00.0: reg 10 32bit mmio: [0xf8100000-0xf8100fff] [ 0.128001] pci 0000:15:00.0: supports D1 D2 [ 0.128001] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128001] pci 0000:15:00.0: PME# disabled [ 0.128001] pci 0000:15:00.1: reg 10 32bit mmio: [0xf8101000-0xf81017ff] [ 0.128001] pci 0000:15:00.1: supports D1 D2 [ 0.128001] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128001] pci 0000:15:00.1: PME# disabled [ 0.128001] pci 0000:15:00.2: reg 10 32bit mmio: [0xf8101800-0xf81018ff] [ 0.128001] pci 0000:15:00.2: supports D1 D2 [ 0.128001] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128001] pci 0000:15:00.2: PME# disabled [ 0.128119] pci 0000:15:00.3: reg 10 32bit mmio: [0xf8101c00-0xf8101cff] [ 0.128323] pci 0000:15:00.3: supports D1 D2 [ 0.128326] pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128408] pci 0000:15:00.3: PME# disabled [ 0.128614] pci 0000:15:00.4: reg 10 32bit mmio: [0xf8102000-0xf81020ff] [ 0.128818] pci 0000:15:00.4: supports D1 D2 [ 0.128821] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128902] pci 0000:15:00.4: PME# disabled [ 0.129107] pci 0000:15:00.5: reg 10 32bit mmio: [0xf8102400-0xf81024ff] [ 0.129311] pci 0000:15:00.5: supports D1 D2 [ 0.129314] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold [ 0.129395] pci 0000:15:00.5: PME# disabled [ 0.129686] pci 0000:00:1e.0: transparent bridge [ 0.129764] pci 0000:00:1e.0: bridge io port: [0x8000-0xbfff] [ 0.129777] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8100000-0xfbffffff] [ 0.129800] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.129999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.130268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.130380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.130492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.130600] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.130707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.130828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.130948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.145854] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 0.146672] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.147487] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.148192] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.148981] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.149770] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.150559] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.151351] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.152012] sync cpu 0 get result 1 max_id 1 [ 0.152025] sync cpu 1 get result 1 max_id 1 [ 0.152030] alloc irq_desc for 756 on node 0 [ 0.152034] alloc kstat_irqs on node 0 [ 0.152078] xen_balloon: Initialising balloon driver with page order 0. [ 0.152242] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.152331] vgaarb: loaded [ 0.152436] PCI: Using ACPI for IRQ routing [ 0.152653] Switching to clocksource xen [ 0.153857] pnp: PnP ACPI init [ 0.153932] ACPI: bus type pnp registered [ 0.156323] xen: registering gsi 13 triggering 1 polarity 0 [ 0.156327] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.156398] xen: --> irq=13 [ 0.156463] xen: registering gsi 8 triggering 1 polarity 0 [ 0.156466] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.156535] xen: --> irq=8 [ 0.156600] xen: registering gsi 1 triggering 1 polarity 0 [ 0.156603] xen_allocate_pirq: returning irq 1 for gsi 1 [ 0.156670] xen: --> irq=1 [ 0.156731] xen: registering gsi 12 triggering 1 polarity 0 [ 0.156734] xen_allocate_pirq: returning irq 12 for gsi 12 [ 0.156800] xen: --> irq=12 [ 0.159173] pnp: PnP ACPI: found 11 devices [ 0.159239] ACPI: ACPI bus type pnp unregistered [ 0.159314] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.159384] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 0.159454] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 0.159523] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 0.159593] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 0.159662] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 0.159732] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 0.159803] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 0.159873] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 0.159942] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 0.160012] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.160081] system 00:00: iomem range 0x100000-0xbfffffff could not be reserved [ 0.160162] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved [ 0.160244] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved [ 0.160342] system 00:02: ioport range 0x164e-0x164f has been reserved [ 0.160412] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.160481] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 0.160550] system 00:02: ioport range 0x800-0x80f has been reserved [ 0.160619] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.160689] system 00:02: ioport range 0x1600-0x165f could not be reserved [ 0.160759] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.160829] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.160900] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.160970] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.161041] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.161111] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved [ 0.167402] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.167704] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff] [ 0.167789] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.167861] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.167936] pci 0000:00:01.0: MEM window: 0xd4000000-0xd6ffffff [ 0.168005] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.168005] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.168005] pci 0000:00:1c.0: IO window: 0x3000-0x3fff [ 0.168005] pci 0000:00:1c.0: MEM window: 0xfc000000-0xfdffffff [ 0.168005] pci 0000:00:1c.0: PREFETCH window: 0x000000f8000000-0x000000f80fffff [ 0.168005] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.168005] pci 0000:00:1c.1: IO window: 0x4000-0x4fff [ 0.168005] pci 0000:00:1c.1: MEM window: 0xdc100000-0xdf2fffff [ 0.168005] pci 0000:00:1c.1: PREFETCH window: 0x000000dfd00000-0x000000dfdfffff [ 0.168005] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.168005] pci 0000:00:1c.2: IO window: 0x5000-0x5fff [ 0.168005] pci 0000:00:1c.2: MEM window: 0xd8000000-0xd9ffffff [ 0.168005] pci 0000:00:1c.2: PREFETCH window: 0x000000dfa00000-0x000000dfafffff [ 0.168005] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 0.168005] pci 0000:00:1c.3: IO window: 0x6000-0x6fff [ 0.168005] pci 0000:00:1c.3: MEM window: 0xd0000000-0xd1ffffff [ 0.168005] pci 0000:00:1c.3: PREFETCH window: 0x000000df700000-0x000000df7fffff [ 0.168005] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d [ 0.168005] pci 0000:00:1c.4: IO window: 0x7000-0x7fff [ 0.168005] pci 0000:00:1c.4: MEM window: 0xcc000000-0xcdffffff [ 0.168005] pci 0000:00:1c.4: PREFETCH window: 0x000000df400000-0x000000df4fffff [ 0.168005] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 [ 0.168005] pci 0000:15:00.0: IO window: 0x008000-0x0080ff [ 0.168005] pci 0000:15:00.0: IO window: 0x008400-0x0084ff [ 0.168005] pci 0000:15:00.0: PREFETCH window: 0xf4000000-0xf7ffffff [ 0.168005] pci 0000:15:00.0: MEM window: 0xc0000000-0xc3ffffff [ 0.168005] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 [ 0.168005] pci 0000:00:1e.0: IO window: 0x8000-0xbfff [ 0.168005] pci 0000:00:1e.0: MEM window: 0xf8100000-0xfbffffff [ 0.168005] pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff [ 0.168005] xen: registering gsi 16 triggering 0 polarity 1 [ 0.168005] alloc irq_desc for 16 on node 0 [ 0.168005] alloc kstat_irqs on node 0 [ 0.170488] xen: --> irq=16 [ 0.170495] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.170569] pci 0000:00:01.0: setting latency timer to 64 [ 0.170596] xen: registering gsi 20 triggering 0 polarity 1 [ 0.170601] alloc irq_desc for 20 on node 0 [ 0.170604] alloc kstat_irqs on node 0 [ 0.170608] xen: --> irq=20 [ 0.170613] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.170691] pci 0000:00:1c.0: setting latency timer to 64 [ 0.170720] xen: registering gsi 21 triggering 0 polarity 1 [ 0.170725] alloc irq_desc for 21 on node 0 [ 0.170727] alloc kstat_irqs on node 0 [ 0.170732] xen: --> irq=21 [ 0.170737] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.170818] pci 0000:00:1c.1: setting latency timer to 64 [ 0.170847] xen: registering gsi 22 triggering 0 polarity 1 [ 0.170852] alloc irq_desc for 22 on node 0 [ 0.170854] alloc kstat_irqs on node 0 [ 0.170858] xen: --> irq=22 [ 0.170863] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.170942] pci 0000:00:1c.2: setting latency timer to 64 [ 0.170971] xen: registering gsi 23 triggering 0 polarity 1 [ 0.170975] alloc irq_desc for 23 on node 0 [ 0.170978] alloc kstat_irqs on node 0 [ 0.170982] xen: --> irq=23 [ 0.170987] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.171065] pci 0000:00:1c.3: setting latency timer to 64 [ 0.171094] xen: registering gsi 20 triggering 0 polarity 1 [ 0.171097] xen_allocate_pirq: returning irq 20 for gsi 20 [ 0.171163] xen: --> irq=20 [ 0.171166] Already setup the GSI :20 [ 0.171230] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.171308] pci 0000:00:1c.4: setting latency timer to 64 [ 0.171322] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 0.171404] pci 0000:00:1e.0: setting latency timer to 64 [ 0.171436] xen: registering gsi 16 triggering 0 polarity 1 [ 0.171438] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.171504] xen: --> irq=16 [ 0.171507] Already setup the GSI :16 [ 0.171572] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.171652] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.171656] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.171659] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.171663] pci_bus 0000:01: resource 1 mem: [0xd4000000-0xd6ffffff] [ 0.171666] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.171669] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] [ 0.171673] pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff] [ 0.171676] pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf80fffff] [ 0.171679] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff] [ 0.171683] pci_bus 0000:03: resource 1 mem: [0xdc100000-0xdf2fffff] [ 0.171686] pci_bus 0000:03: resource 2 pref mem [0xdfd00000-0xdfdfffff] [ 0.171689] pci_bus 0000:04: resource 0 io: [0x5000-0x5fff] [ 0.171693] pci_bus 0000:04: resource 1 mem: [0xd8000000-0xd9ffffff] [ 0.171696] pci_bus 0000:04: resource 2 pref mem [0xdfa00000-0xdfafffff] [ 0.171699] pci_bus 0000:05: resource 0 io: [0x6000-0x6fff] [ 0.171702] pci_bus 0000:05: resource 1 mem: [0xd0000000-0xd1ffffff] [ 0.171706] pci_bus 0000:05: resource 2 pref mem [0xdf700000-0xdf7fffff] [ 0.171709] pci_bus 0000:0d: resource 0 io: [0x7000-0x7fff] [ 0.171712] pci_bus 0000:0d: resource 1 mem: [0xcc000000-0xcdffffff] [ 0.171716] pci_bus 0000:0d: resource 2 pref mem [0xdf400000-0xdf4fffff] [ 0.171719] pci_bus 0000:15: resource 0 io: [0x8000-0xbfff] [ 0.171722] pci_bus 0000:15: resource 1 mem: [0xf8100000-0xfbffffff] [ 0.171725] pci_bus 0000:15: resource 2 pref mem [0xf4000000-0xf7ffffff] [ 0.171729] pci_bus 0000:15: resource 3 io: [0x00-0xffff] [ 0.171732] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.171735] pci_bus 0000:16: resource 0 io: [0x8000-0x80ff] [ 0.171738] pci_bus 0000:16: resource 1 io: [0x8400-0x84ff] [ 0.171742] pci_bus 0000:16: resource 2 pref mem [0xf4000000-0xf7ffffff] [ 0.171745] pci_bus 0000:16: resource 3 mem: [0xc0000000-0xc3ffffff] [ 0.171780] NET: Registered protocol family 2 [ 0.172224] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.175183] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.179597] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.180250] TCP: Hash tables configured (established 524288 bind 65536) [ 0.180321] TCP reno registered [ 0.180526] NET: Registered protocol family 1 [ 0.180991] pci 0000:01:00.0: Boot video device [ 0.181077] Unpacking initramfs... [ 0.222329] Freeing initrd memory: 27815k freed [ 0.239175] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.239260] DMA: Placing 64MB software IO TLB between ffff8800067bc000 - ffff88000a7bc000 [ 0.239345] DMA: software IO TLB at phys 0x67bc000 - 0xa7bc000 [ 0.239527] Simple Boot Flag at 0x35 set to 0x1 [ 0.240324] audit: initializing netlink socket (disabled) [ 0.240407] type=2000 audit(1283386485.644:1): initialized [ 0.243933] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.251360] VFS: Disk quotas dquot_6.5.2 [ 0.251487] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.251657] msgmni has been set to 5886 [ 0.252002] alg: No test for stdrng (krng) [ 0.252137] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.252220] io scheduler noop registered [ 0.252284] io scheduler anticipatory registered [ 0.252350] io scheduler deadline registered [ 0.252456] io scheduler cfq registered (default) [ 0.252791] alloc irq_desc for 755 on node 0 [ 0.252795] alloc kstat_irqs on node 0 [ 0.252836] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.253186] alloc irq_desc for 754 on node 0 [ 0.253189] alloc kstat_irqs on node 0 [ 0.253265] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.253700] alloc irq_desc for 753 on node 0 [ 0.253703] alloc kstat_irqs on node 0 [ 0.253767] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.254203] alloc irq_desc for 752 on node 0 [ 0.254206] alloc kstat_irqs on node 0 [ 0.254282] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.254718] alloc irq_desc for 751 on node 0 [ 0.254721] alloc kstat_irqs on node 0 [ 0.254784] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.255220] alloc irq_desc for 750 on node 0 [ 0.255223] alloc kstat_irqs on node 0 [ 0.255298] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.260702] registering netback [ 0.260851] alloc irq_desc for 749 on node 0 [ 0.260855] alloc kstat_irqs on node 0 [ 0.262524] alloc irq_desc for 748 on node 0 [ 0.262527] alloc kstat_irqs on node 0 [ 0.262875] hpet_acpi_add: no address or irqs in _CRS [ 0.262974] Linux agpgart interface v0.103 [ 0.263124] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.263671] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.263819] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.273801] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.273876] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.274046] mice: PS/2 mouse device common for all mice [ 0.274199] rtc_cmos 00:07: RTC can wake from S4 [ 0.274316] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.274445] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.274523] cpuidle: using governor ladder [ 0.274588] cpuidle: using governor menu [ 0.274656] No iBFT detected. [ 0.275059] TCP cubic registered [ 0.275281] NET: Registered protocol family 10 [ 0.275905] lo: Disabled Privacy Extensions [ 0.276276] Mobile IPv6 [ 0.276341] NET: Registered protocol family 17 [ 0.276503] PM: Resume from disk failed. [ 0.276518] registered taskstats version 1 [ 0.278249] rtc_cmos 00:07: setting system clock to 2010-09-02 00:14:45 UTC (1283386485) [ 0.278383] Initalizing network drop monitor service [ 0.278534] Freeing unused kernel memory: 596k freed [ 0.278902] Write protecting the kernel read-only data: 4308k [ 0.280968] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.318234] udev: starting version 160 [ 0.501012] usbcore: registered new interface driver usbfs [ 0.501116] usbcore: registered new interface driver hub [ 0.517613] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 0.517688] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 0.517841] xen: registering gsi 20 triggering 0 polarity 1 [ 0.517845] xen_allocate_pirq: returning irq 20 for gsi 20 [ 0.517912] xen: --> irq=20 [ 0.517918] Already setup the GSI :20 [ 0.517983] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.518069] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.518378] alloc irq_desc for 747 on node 0 [ 0.518381] alloc kstat_irqs on node 0 [ 0.539694] usbcore: registered new device driver usb [ 0.556691] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.558583] SCSI subsystem initialized [ 0.571981] libata version 3.00 loaded. [ 0.572435] ricoh-mmc: Ricoh MMC Controller disabling driver [ 0.572508] ricoh-mmc: Copyright(c) Philip Langdale [ 0.572605] ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11) [ 0.572735] ricoh-mmc: Controller is now disabled. [ 0.580928] xen: registering gsi 17 triggering 0 polarity 1 [ 0.580937] alloc irq_desc for 17 on node 0 [ 0.580940] alloc kstat_irqs on node 0 [ 0.580946] xen: --> irq=17 [ 0.580956] firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.596655] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.596736] ACPI: Thermal Zone [THM0] (55 C) [ 0.596862] sdhci: Secure Digital Host Controller Interface driver [ 0.596932] sdhci: Copyright(c) Pierre Ossman [ 0.598977] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.599057] ACPI: Thermal Zone [THM1] (57 C) [ 0.661022] firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.10 [ 0.661407] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) [ 0.661523] xen: registering gsi 18 triggering 0 polarity 1 [ 0.661531] alloc irq_desc for 18 on node 0 [ 0.661534] alloc kstat_irqs on node 0 [ 0.661539] xen: --> irq=18 [ 0.661547] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.662657] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 0.662753] sdhci-pci 0000:15:00.2: setting latency timer to 64 [ 0.663808] Registered led device: mmc0:: [ 0.664907] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA [ 0.778661] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:58:c9:91:92 [ 0.778745] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 0.778850] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff [ 0.779223] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 0.779546] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 0.779627] xen: registering gsi 22 triggering 0 polarity 1 [ 0.779630] xen_allocate_pirq: returning irq 22 for gsi 22 [ 0.779697] xen: --> irq=22 [ 0.779701] Already setup the GSI :22 [ 0.779766] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.779857] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.779866] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.779956] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.780006] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.780006] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe225800 [ 0.800031] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.800143] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.800215] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.800299] usb usb1: Product: EHCI Host Controller [ 0.800367] usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd [ 0.800437] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.800596] usb usb1: configuration #1 chosen from 1 choice [ 0.800706] hub 1-0:1.0: USB hub found [ 0.800790] hub 1-0:1.0: 4 ports detected [ 0.800941] ahci 0000:00:1f.2: version 3.0 [ 0.800971] xen: registering gsi 16 triggering 0 polarity 1 [ 0.800974] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.801041] xen: --> irq=16 [ 0.801045] Already setup the GSI :16 [ 0.801110] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.801265] alloc irq_desc for 746 on node 0 [ 0.801268] alloc kstat_irqs on node 0 [ 0.801391] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode [ 0.801476] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 0.801568] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.801908] scsi0 : ahci [ 0.802086] scsi1 : ahci [ 0.802238] scsi2 : ahci [ 0.802455] ata1: SATA max UDMA/133 abar m2048@0xfe225000 port 0xfe225100 irq 746 [ 0.802538] ata2: DUMMY [ 0.802604] ata3: SATA max UDMA/133 abar m2048@0xfe225000 port 0xfe225200 irq 746 [ 0.802715] ata_piix 0000:00:1f.1: version 2.13 [ 0.802730] xen: registering gsi 16 triggering 0 polarity 1 [ 0.802733] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.802811] xen: --> irq=16 [ 0.802815] Already setup the GSI :16 [ 0.802891] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 0.803023] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.803168] scsi3 : ata_piix [ 0.803313] scsi4 : ata_piix [ 0.804396] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14 [ 0.804467] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15 [ 0.805072] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 0.805266] ata5: port disabled. ignoring. [ 0.805457] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 0.805537] xen: registering gsi 19 triggering 0 polarity 1 [ 0.805544] alloc irq_desc for 19 on node 0 [ 0.805547] alloc kstat_irqs on node 0 [ 0.805551] xen: --> irq=19 [ 0.805558] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.805650] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.805658] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.805736] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.805895] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.809859] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.809886] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe225c00 [ 0.824018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.824112] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.824181] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.824262] usb usb2: Product: EHCI Host Controller [ 0.824328] usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd [ 0.824396] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.824541] usb usb2: configuration #1 chosen from 1 choice [ 0.824657] hub 2-0:1.0: USB hub found [ 0.824737] hub 2-0:1.0: 6 ports detected [ 0.859518] uhci_hcd: USB Universal Host Controller Interface driver [ 0.859623] xen: registering gsi 20 triggering 0 polarity 1 [ 0.859627] xen_allocate_pirq: returning irq 20 for gsi 20 [ 0.859693] xen: --> irq=20 [ 0.859698] Already setup the GSI :20 [ 0.859763] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.859845] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.859853] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.859928] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.860104] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 0.860254] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.860322] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.860403] usb usb3: Product: UHCI Host Controller [ 0.860469] usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 0.860538] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.860677] usb usb3: configuration #1 chosen from 1 choice [ 0.860782] hub 3-0:1.0: USB hub found [ 0.860862] hub 3-0:1.0: 2 ports detected [ 0.861267] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [ 0.861571] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [ 0.861647] xen: registering gsi 21 triggering 0 polarity 1 [ 0.861650] xen_allocate_pirq: returning irq 21 for gsi 21 [ 0.861716] xen: --> irq=21 [ 0.861720] Already setup the GSI :21 [ 0.861787] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.861870] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.861878] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.861955] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.862118] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 0.862266] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.862335] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.862417] usb usb4: Product: UHCI Host Controller [ 0.862483] usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 0.862551] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.862688] usb usb4: configuration #1 chosen from 1 choice [ 0.862790] hub 4-0:1.0: USB hub found [ 0.862871] hub 4-0:1.0: 2 ports detected [ 0.863270] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.863569] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.863645] xen: registering gsi 16 triggering 0 polarity 1 [ 0.863648] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.863715] xen: --> irq=16 [ 0.863718] Already setup the GSI :16 [ 0.863784] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.863865] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.863873] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.863947] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.869345] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001860 [ 0.869496] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.869565] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.869647] usb usb5: Product: UHCI Host Controller [ 0.869712] usb usb5: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 0.869781] usb usb5: SerialNumber: 0000:00:1d.0 [ 0.869918] usb usb5: configuration #1 chosen from 1 choice [ 0.870022] hub 5-0:1.0: USB hub found [ 0.870103] hub 5-0:1.0: 2 ports detected [ 0.870247] xen: registering gsi 17 triggering 0 polarity 1 [ 0.870250] xen_allocate_pirq: returning irq 17 for gsi 17 [ 0.870317] xen: --> irq=17 [ 0.870320] Already setup the GSI :17 [ 0.870386] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.870466] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.870474] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.870546] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.870691] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880 [ 0.870835] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.870904] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.870984] usb usb6: Product: UHCI Host Controller [ 0.871050] usb usb6: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 0.871118] usb usb6: SerialNumber: 0000:00:1d.1 [ 0.871252] usb usb6: configuration #1 chosen from 1 choice [ 0.871356] hub 6-0:1.0: USB hub found [ 0.871436] hub 6-0:1.0: 2 ports detected [ 0.871867] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 0.872175] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 0.872247] xen: registering gsi 18 triggering 0 polarity 1 [ 0.872251] xen_allocate_pirq: returning irq 18 for gsi 18 [ 0.872317] xen: --> irq=18 [ 0.872321] Already setup the GSI :18 [ 0.872386] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.872467] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.872474] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.872801] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.872948] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 0.873097] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.873166] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.873248] usb usb7: Product: UHCI Host Controller [ 0.873314] usb usb7: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 0.873382] usb usb7: SerialNumber: 0000:00:1d.2 [ 0.873528] usb usb7: configuration #1 chosen from 1 choice [ 0.873631] hub 7-0:1.0: USB hub found [ 0.873711] hub 7-0:1.0: 2 ports detected [ 0.968774] ata4.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, PX07, max UDMA/33 [ 0.985386] ata4.00: configured for UDMA/33 [ 1.112023] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.120049] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.120143] ata3: SATA link down (SStatus 0 SControl 300) [ 1.121377] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.121382] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.121467] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.122645] ata1.00: ATA-8: Hitachi HTS722020K9SA00, DC4OC76A, max UDMA/133 [ 1.122715] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.124217] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.124222] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.124307] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.125517] ata1.00: configured for UDMA/133 [ 1.142728] ata1.00: configured for UDMA/133 [ 1.142797] ata1: EH complete [ 1.142986] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72202 DC4O PQ: 0 ANSI: 5 [ 1.147202] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N PX07 PQ: 0 ANSI: 5 [ 1.159691] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 1.159897] sd 0:0:0:0: [sda] Write Protect is off [ 1.159967] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.160013] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.160172] firewire_core: created device fw0: GUID 00016c2000175c12, S400 [ 1.160473] sda: sda1 sda2 sda3 sda4 [ 1.174054] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.190418] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.190504] Uniform CD-ROM driver Revision: 3.20 [ 1.190695] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.197392] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.197506] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 1.246427] usb 1-3: New USB device found, idVendor=1307, idProduct=0165 [ 1.246499] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.246569] usb 1-3: Product: USB Mass Storage Device [ 1.246635] usb 1-3: Manufacturer: USBest Technology [ 1.246701] usb 1-3: SerialNumber: 1008029202a548 [ 1.246849] usb 1-3: configuration #1 chosen from 1 choice [ 1.255920] Initializing USB Mass Storage driver... [ 1.256141] scsi5 : SCSI emulation for USB Mass Storage devices [ 1.256317] usbcore: registered new interface driver usb-storage [ 1.256388] USB Mass Storage support registered. [ 1.256782] usb-storage: device found at 2 [ 1.256785] usb-storage: waiting for device to settle before scanning [ 1.579173] device-mapper: uevent: version 1.0.3 [ 1.579410] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.919959] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 3.438703] udev: starting version 160 [ 3.892809] cfg80211: Using static regulatory domain info [ 3.892896] cfg80211: Regulatory domain: US [ 3.892962] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3.893045] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 3.893115] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 3.893185] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 3.893254] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 3.893325] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 3.893401] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 3.893481] cfg80211: Calling CRDA for country: US [ 4.010772] ACPI: AC Adapter [AC] (on-line) [ 4.019257] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 4.023576] ACPI: WMI: Mapper loaded [ 4.032299] Non-volatile memory driver v1.3 [ 4.035797] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 [ 4.037523] ACPI: Lid Switch [LID] [ 4.038478] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 [ 4.038676] ACPI: Sleep Button [SLPB] [ 4.038874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 4.039081] ACPI: Power Button [PWRF] [ 4.054701] ACPI: SSDT 00000000bfee1b32 002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 4.057802] ACPI: SSDT 00000000bfee1e7b 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 4.061868] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 4.061957] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 4.062152] xen: registering gsi 17 triggering 0 polarity 1 [ 4.062156] xen_allocate_pirq: returning irq 17 for gsi 17 [ 4.062223] xen: --> irq=17 [ 4.062228] Already setup the GSI :17 [ 4.062301] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.062427] iwl3945 0000:03:00.0: setting latency timer to 64 [ 4.084399] ACPI: Battery Slot [BAT0] (battery present) [ 4.088409] Marking TSC unstable due to TSC halts in idle [ 4.088610] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) [ 4.089826] ACPI: SSDT 00000000bfee1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 4.091307] ACPI: SSDT 00000000bfee1df6 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 4.096255] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) [ 4.132886] iwl3945 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 4.132977] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 4.133182] alloc irq_desc for 745 on node 0 [ 4.133185] alloc kstat_irqs on node 0 [ 4.152706] acpi device:06: registered as cooling_device0 [ 4.153785] thinkpad_acpi: ThinkPad ACPI Extras v0.23 [ 4.153855] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 4.153922] thinkpad_acpi: ThinkPad BIOS 7KETC9WW (2.29 ), EC 7KHT24WW-1.08 [ 4.153991] thinkpad_acpi: Lenovo ThinkPad R61, model 8919W1B [ 4.155169] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input6 [ 4.155377] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 4.156594] thinkpad_acpi: ACPI backlight control delay disabled [ 4.158439] thinkpad_acpi: radio switch found; radios are enabled [ 4.158695] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 4.158784] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 4.170414] Registered led device: tpacpi::thinklight [ 4.170808] Registered led device: tpacpi::power [ 4.171178] Registered led device: tpacpi::standby [ 4.171536] Registered led device: tpacpi::thinkvantage [ 4.175009] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 4.175539] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 [ 4.241769] xen: registering gsi 23 triggering 0 polarity 1 [ 4.241774] xen_allocate_pirq: returning irq 23 for gsi 23 [ 4.241844] xen: --> irq=23 [ 4.241850] Already setup the GSI :23 [ 4.241915] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.241977] [drm] Initialized drm 1.1.0 20060810 [ 4.264936] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] [ 4.399275] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 4.399353] yenta_cardbus 0000:15:00.0: Socket status: 30000006 [ 4.399440] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff [ 4.399530] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff [ 4.399616] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff [ 4.407593] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 4.736236] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input8 [ 4.741454] nouveau 0000:01:00.0: power state changed by ACPI to D0 [ 4.741580] nouveau 0000:01:00.0: power state changed by ACPI to D0 [ 4.741659] xen: registering gsi 16 triggering 0 polarity 1 [ 4.741663] xen_allocate_pirq: returning irq 16 for gsi 16 [ 4.741731] xen: --> irq=16 [ 4.741736] Already setup the GSI :16 [ 4.741801] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.741879] nouveau 0000:01:00.0: setting latency timer to 64 [ 4.746373] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5 [ 4.754531] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086900a2) [ 4.763162] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 4.775454] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input9 [ 4.840733] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 4.840805] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 4.840873] [drm] nouveau 0000:01:00.0: Bios version 60.86.3e.00 [ 4.840942] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [ 4.841025] [drm] nouveau 0000:01:00.0: BIT table 'd' not found [ 4.841102] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 4.841193] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2 [ 4.841263] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff [ 4.841346] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff [ 4.841429] [drm] nouveau 0000:01:00.0: 2: 0x00001231: type 0x31 idx 2 tag 0x07 [ 4.841512] [drm] nouveau 0000:01:00.0: 3: 0x00000311: type 0x11 idx 3 tag 0xff [ 4.841595] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034 [ 4.841666] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02811300 00000028 [ 4.841735] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02822312 00010030 [ 4.841805] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 014333f1 0080c080 [ 4.841875] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000 [ 4.841951] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDD0F [ 4.884237] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE04F [ 4.920142] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEAA4 [ 4.920285] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB96 [ 4.928205] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED83 [ 4.928334] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEDE8 [ 4.952100] [drm] nouveau 0000:01:00.0: 0xEDE8: Condition still not met after 20ms, skipping following opcodes [ 4.952255] [drm] nouveau 0000:01:00.0: 0xCE7E: parsing output script 0 [ 4.952366] [drm] nouveau 0000:01:00.0: 0xCFF4: parsing output script 0 [ 4.952475] [drm] nouveau 0000:01:00.0: 0xC66A: parsing output script 0 [ 5.074376] [TTM] Zone kernel: Available graphics memory: 1570058 kiB. [ 5.074464] [drm] nouveau 0000:01:00.0: 128 MiB VRAM [ 5.107338] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 5.108999] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 5.109428] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 5.117677] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 5.118915] [drm] nouveau 0000:01:00.0: Detected a LVDS output [ 5.118986] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 5.119052] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 5.119117] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown [ 5.119183] [drm] nouveau 0000:01:00.0: Detected a LVDS connector [ 5.217761] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 5.217986] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector [ 6.260254] usb-storage: device scan complete [ 6.261109] scsi 5:0:0:0: Direct-Access 0.00 PQ: 0 ANSI: 2 [ 6.262817] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 6.266606] sd 5:0:0:0: [sdb] 31647951 512-byte logical blocks: (16.2 GB/15.0 GiB) [ 6.267354] sd 5:0:0:0: [sdb] Write Protect is off [ 6.267420] sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 6.267423] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 6.271477] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 6.271545] sdb: [ 6.559494] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x40250000, bo ffff8800be6a7600 [ 6.567823] Console: switching to colour frame buffer device 160x50 [ 6.567843] [drm] nouveau 0000:01:00.0: 0xCE82: parsing output script 1 [ 6.567865] [drm] nouveau 0000:01:00.0: 0xCCE3: parsing clock script 0 [ 6.570232] fb0: nouveaufb frame buffer device [ 6.570248] registered panic notifier [ 6.570269] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 6.584403] [drm] nouveau 0000:01:00.0: 0xCE41: parsing clock script 1 [ 6.843189] sdb1 [ 6.846770] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 6.846803] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 6.981445] xen: registering gsi 17 triggering 0 polarity 1 [ 6.981450] xen_allocate_pirq: returning irq 17 for gsi 17 [ 6.981464] xen: --> irq=17 [ 6.981469] Already setup the GSI :17 [ 6.981477] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.981489] hda_intel: probe_mask set to 0x1 for device 17aa:20ac [ 6.981537] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7.417602] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 [ 10.026539] loop: module loaded [ 10.108536] thinkpad_ec: thinkpad_ec 0.40 loaded. [ 10.149906] tp_smapi 0.40 loading... [ 10.151923] tp_smapi successfully loaded (smapi_port=0xb2). [ 10.171125] hdaps: LENOVO ThinkPad R61 detected, setting orientation 1 [ 10.171719] hdaps: initial mode latch is 0x05 [ 10.171871] hdaps: setting ec_rate=250, filter_order=2 [ 10.172095] hdaps: device successfully initialized. [ 10.172528] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input11 [ 10.173851] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input12 [ 10.174301] hdaps: driver successfully loaded. [ 10.420404] Adding 1998840k swap on /dev/mapper/root--volume-host--swap. Priority:-1 extents:1 across:1998840k [ 11.933440] fuse init (API version 7.13) [ 12.429988] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.003150] Event-channel device installed. [ 13.185364] alloc irq_desc for 744 on node 0 [ 13.185368] alloc kstat_irqs on node 0 [ 13.185447] alloc irq_desc for 743 on node 0 [ 13.185450] alloc kstat_irqs on node 0 [ 13.185784] XENBUS: Unable to read cpu state [ 13.186222] XENBUS: Unable to read cpu state [ 13.866040] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 13.866808] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 13.868964] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.936997] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13 [ 16.036958] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 16.356250] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 [ 16.429286] Registered led device: iwl-phy0::radio [ 16.429943] Registered led device: iwl-phy0::assoc [ 16.430268] Registered led device: iwl-phy0::RX [ 16.430868] Registered led device: iwl-phy0::TX [ 16.439253] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.655502] Bridge firewalling registered [ 17.759997] Bluetooth: Core ver 2.15 [ 17.760440] NET: Registered protocol family 31 [ 17.760706] Bluetooth: HCI device and connection manager initialized [ 17.761264] Bluetooth: HCI socket layer initialized [ 17.874320] Bluetooth: L2CAP ver 2.14 [ 17.874967] Bluetooth: L2CAP socket layer initialized [ 17.921245] Bluetooth: RFCOMM TTY layer initialized [ 17.921889] Bluetooth: RFCOMM socket layer initialized [ 17.922530] Bluetooth: RFCOMM ver 1.11 [ 18.178028] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.178033] Bluetooth: BNEP filters: protocol multicast [ 18.363969] Bluetooth: SCO (Voice Link) ver 0.6 [ 18.363975] Bluetooth: SCO socket layer initialized [ 18.608426] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [ 18.615384] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 19.236796] lp: driver loaded but no devices found [ 19.250765] ppdev: user-space parallel port driver [ 21.068138] smapi smapi: set_real_thresh: set start to 39 for bat=0 [ 21.296095] smapi smapi: set_real_thresh: set stop to 70 for bat=0 [ 22.876391] CPU0 attaching NULL sched-domain. [ 22.876398] CPU1 attaching NULL sched-domain. [ 22.900262] CPU0 attaching sched-domain: [ 22.900273] domain 0: span 0-1 level CPU [ 22.900284] groups: 0 1 [ 22.900306] CPU1 attaching sched-domain: [ 22.900314] domain 0: span 0-1 level CPU [ 22.900323] groups: 1 0 [ 23.937122] eth0: no IPv6 routers present [ 147.065387] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 165.398494] wlan0: direct probe to AP 00:14:bf:89:44:68 (try 1) [ 165.401060] wlan0: direct probe responded [ 165.401071] wlan0: authenticate with AP 00:14:bf:89:44:68 (try 1) [ 165.402971] wlan0: authenticated [ 165.403028] wlan0: associate with AP 00:14:bf:89:44:68 (try 1) [ 165.405527] wlan0: RX AssocResp from 00:14:bf:89:44:68 (capab=0x411 status=0 aid=1) [ 165.405537] wlan0: associated [ 165.413096] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 165.471195] padlock: VIA PadLock not detected. [ 176.376116] wlan0: no IPv6 routers present [ 600.045153] wlan0: deauthenticating from 00:14:bf:89:44:68 by local choice (reason=3) [ 601.841261] wlan0: direct probe to AP 00:14:bf:89:44:68 (try 1) [ 601.844374] wlan0: direct probe responded [ 601.844386] wlan0: authenticate with AP 00:14:bf:89:44:68 (try 1) [ 601.846258] wlan0: authenticated [ 601.846314] wlan0: associate with AP 00:14:bf:89:44:68 (try 1) [ 601.848830] wlan0: RX AssocResp from 00:14:bf:89:44:68 (capab=0x411 status=0 aid=1) [ 601.848840] wlan0: associated [ 636.729194] wlan0: deauthenticating from 00:14:bf:89:44:68 by local choice (reason=3) [ 638.572625] wlan0: direct probe to AP 00:14:bf:89:44:68 (try 1) [ 638.575240] wlan0: direct probe responded [ 638.575251] wlan0: authenticate with AP 00:14:bf:89:44:68 (try 1) [ 638.577697] wlan0: authenticated [ 638.577756] wlan0: associate with AP 00:14:bf:89:44:68 (try 1) [ 638.580243] wlan0: RX AssocResp from 00:14:bf:89:44:68 (capab=0x411 status=0 aid=1) [ 638.580253] wlan0: associated [ 773.295801] dumpcap uses obsolete (PF_INET,SOCK_PACKET) [ 1007.160182] e1000e: eth0 NIC Link is Down [ 1070.001189] wlan0: deauthenticating from 00:14:bf:89:44:68 by local choice (reason=3) [ 1071.746176] wlan0: direct probe to AP 00:14:bf:89:44:68 (try 1) [ 1071.748745] wlan0: direct probe responded [ 1071.748757] wlan0: authenticate with AP 00:14:bf:89:44:68 (try 1) [ 1071.750613] wlan0: authenticated [ 1071.750674] wlan0: associate with AP 00:14:bf:89:44:68 (try 1) [ 1071.755706] wlan0: RX AssocResp from 00:14:bf:89:44:68 (capab=0x411 status=0 aid=1) [ 1071.755717] wlan0: associated [ 1103.761178] wlan0: deauthenticating from 00:14:bf:89:44:68 by local choice (reason=3) [ 1105.574492] wlan0: direct probe to AP 00:14:bf:89:44:68 (try 1) [ 1105.773137] wlan0: direct probe to AP 00:14:bf:89:44:68 (try 2) [ 1105.775739] wlan0: direct probe responded [ 1105.775749] wlan0: authenticate with AP 00:14:bf:89:44:68 (try 1) [ 1105.778187] wlan0: authenticated [ 1105.778252] wlan0: associate with AP 00:14:bf:89:44:68 (try 1) [ 1105.780632] wlan0: RX AssocResp from 00:14:bf:89:44:68 (capab=0x411 status=0 aid=1) [ 1105.780642] wlan0: associated [ 1134.836340] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 1681.112174] usb 1-3: USB disconnect, address 2