% /usr/lib/xen-default/bin/pygrub /home/starch/data/xen/domains/squeeze/disk.img
zsh: illegal hardware instruction  /usr/lib/xen-default/bin/pygrub /home/starch/data/xen/domains/squeeze/disk.im

% uname -a
Linux glamdring 3.1.0-1-amd64 #1 SMP Mon Nov 14 08:02:25 UTC 2011 x86_64 GNU/Linux

% dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.1.0-1-amd64 (Debian 3.1.1-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Mon Nov 14 08:02:25 UTC 2011
[    0.000000] Command line: placeholder root=/dev/mapper/vg0-root ro quiet
[    0.000000] Freeing  cf800-fec00 pfn range: 193536 pages freed
[    0.000000] Freeing  fec01-fed1c pfn range: 283 pages freed
[    0.000000] Freeing  fed20-fee00 pfn range: 224 pages freed
[    0.000000] Freeing  fee01-ff000 pfn range: 511 pages freed
[    0.000000] released 194554 pages of unused memory
[    0.000000] 1-1 mapping on 9e->100
[    0.000000] 1-1 mapping on cefd5->cf5cd
[    0.000000] 1-1 mapping on cf5cf->cf681
[    0.000000] 1-1 mapping on cf800->100000
[    0.000000] Set 200460 page(s) to 1-1 mapping.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 000000000009d000 (usable)
[    0.000000]  Xen: 000000000009d800 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 00000000cefd5000 (usable)
[    0.000000]  Xen: 00000000cefd5000 - 00000000cf028000 (ACPI NVS)
[    0.000000]  Xen: 00000000cf028000 - 00000000cf5a5000 (reserved)
[    0.000000]  Xen: 00000000cf5a5000 - 00000000cf5b6000 (ACPI NVS)
[    0.000000]  Xen: 00000000cf5b6000 - 00000000cf5cd000 (reserved)
[    0.000000]  Xen: 00000000cf5cd000 - 00000000cf5cf000 (usable)
[    0.000000]  Xen: 00000000cf5cf000 - 00000000cf5d0000 (ACPI NVS)
[    0.000000]  Xen: 00000000cf5d0000 - 00000000cf5d8000 (reserved)
[    0.000000]  Xen: 00000000cf5d8000 - 00000000cf5e2000 (ACPI NVS)
[    0.000000]  Xen: 00000000cf5e2000 - 00000000cf63e000 (reserved)
[    0.000000]  Xen: 00000000cf63e000 - 00000000cf681000 (ACPI NVS)
[    0.000000]  Xen: 00000000cf681000 - 00000000cf800000 (usable)
[    0.000000]  Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  Xen: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  Xen: 0000000100000000 - 000000025effa000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/P8P67 PRO, BIOS 1502 03/02/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x25effa max_arch_pfn = 0x400000000
[    0.000000] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fce40] fce40
[    0.000000] initial memory mapped : 0 - 04518000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000cf800000
[    0.000000]  0000000000 - 00cf800000 page 4k
[    0.000000] kernel direct mapping tables up to cf800000 @ 97f000-1000000
[    0.000000] xen: setting RW the range fce000 - 1000000
[    0.000000] init_memory_mapping: 0000000100000000-000000025effa000
[    0.000000]  0100000000 - 025effa000 page 4k
[    0.000000] kernel direct mapping tables up to 25effa000 @ cdcd2000-cefd5000
[    0.000000] xen: setting RW the range ce7d0000 - cefd5000
[    0.000000] RAMDISK: 01934000 - 04518000
[    0.000000] ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000cf01f068 0004C (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000cf0279d8 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000cf01f140 08891 (v02 ALASKA    A M I 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000cf5d9f80 00040
[    0.000000] ACPI: APIC 00000000cf027ad0 00072 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000cf027b48 00102 (v01 AMICPU     PROC 00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 00000000cf027c50 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cf027c90 00038 (v01 ALASKA    A M I 01072009 AMI. 00000004)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000025effa000
[    0.000000] Initmem setup node 0 0000000000000000-000000025effa000
[    0.000000]   NODE_DATA [00000001f09e1000 - 00000001f09e5fff]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0025effa
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000cefd5
[    0.000000]     0: 0x000cf5cd -> 0x000cf5cf
[    0.000000]     0: 0x000cf681 -> 0x000cf800
[    0.000000]     0: 0x00100000 -> 0x0025effa
[    0.000000] On node 0 totalpages: 2285789
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1620 pages reserved
[    0.000000]   DMA zone: 2305 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 829838 pages, LIFO batch:31
[    0.000000]   Normal zone: 19656 pages used for memmap
[    0.000000]   Normal zone: 1418034 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 255, address 0xfec00000, GSI 0-255
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 272
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cefd5000 - 00000000cf028000
[    0.000000] PM: Registered nosave memory: 00000000cf028000 - 00000000cf5a5000
[    0.000000] PM: Registered nosave memory: 00000000cf5a5000 - 00000000cf5b6000
[    0.000000] PM: Registered nosave memory: 00000000cf5b6000 - 00000000cf5cd000
[    0.000000] PM: Registered nosave memory: 00000000cf5cf000 - 00000000cf5d0000
[    0.000000] PM: Registered nosave memory: 00000000cf5d0000 - 00000000cf5d8000
[    0.000000] PM: Registered nosave memory: 00000000cf5d8000 - 00000000cf5e2000
[    0.000000] PM: Registered nosave memory: 00000000cf5e2000 - 00000000cf63e000
[    0.000000] PM: Registered nosave memory: 00000000cf63e000 - 00000000cf681000
[    0.000000] PM: Registered nosave memory: 00000000cf800000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at cf800000 (gap: cf800000:2f400000)
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.1.1 (preserve-AD)
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff8801f0924000 s80768 r8192 d21632 u110592
[    0.000000] pcpu-alloc: s80768 r8192 d21632 u110592 alloc=27*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    1.341700] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2250177
[    1.341702] Policy zone: Normal
[    1.341704] Kernel command line: placeholder root=/dev/mapper/vg0-root ro quiet
[    1.341724] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    1.356024] Placing 64MB software IO TLB between ffff8801e3400000 - ffff8801e7400000
[    1.356027] software IO TLB at phys 0x1e3400000 - 0x1e7400000
[    1.372316] Memory: 7055160k/9945064k available (3290k kernel code, 801908k absent, 2087996k reserved, 3428k data, 556k init)
[    1.372379] Hierarchical RCU implementation.
[    1.372380] 	RCU dyntick-idle grace-period acceleration is enabled.
[    1.372387] NR_IRQS:33024 nr_irqs:1024 16
[    1.372440] xen: sci override: global_irq=9 trigger=0 polarity=0
[    1.372442] xen: registering gsi 9 triggering 0 polarity 0
[    1.372448] xen: --> pirq=9 -> irq=9 (gsi=9)
[    1.372453] xen: acpi sci 9
[    1.372455] xen: --> pirq=1 -> irq=1 (gsi=1)
[    1.372458] xen: --> pirq=2 -> irq=2 (gsi=2)
[    1.372460] xen: --> pirq=3 -> irq=3 (gsi=3)
[    1.372463] xen: --> pirq=4 -> irq=4 (gsi=4)
[    1.372465] xen: --> pirq=5 -> irq=5 (gsi=5)
[    1.372468] xen: --> pirq=6 -> irq=6 (gsi=6)
[    1.372470] xen: --> pirq=7 -> irq=7 (gsi=7)
[    1.372473] xen: --> pirq=8 -> irq=8 (gsi=8)
[    1.372474] xen_map_pirq_gsi: returning irq 9 for gsi 9
[    1.372476] xen: --> pirq=9 -> irq=9 (gsi=9)
[    1.372479] xen: --> pirq=10 -> irq=10 (gsi=10)
[    1.372481] xen: --> pirq=11 -> irq=11 (gsi=11)
[    1.372484] xen: --> pirq=12 -> irq=12 (gsi=12)
[    1.372486] xen: --> pirq=13 -> irq=13 (gsi=13)
[    1.372489] xen: --> pirq=14 -> irq=14 (gsi=14)
[    1.372491] xen: --> pirq=15 -> irq=15 (gsi=15)
[    1.374931] Console: colour VGA+ 80x25
[    1.374947] console [tty0] enabled
[    1.374970] Xen: using vcpuop timer interface
[    1.374973] installing Xen timer for CPU 0
[    1.374987] Detected 3310.914 MHz processor.
[    1.374991] Calibrating delay loop (skipped), value calculated using timer frequency.. 6621.82 BogoMIPS (lpj=13243656)
[    1.374995] pid_max: default: 32768 minimum: 301
[    1.375028] Security Framework initialized
[    1.378307] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    1.381960] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    1.382970] Mount-cache hash table entries: 256
[    1.383066] Initializing cgroup subsys cpuacct
[    1.383070] Initializing cgroup subsys memory
[    1.383079] Initializing cgroup subsys devices
[    1.383081] Initializing cgroup subsys freezer
[    1.383083] Initializing cgroup subsys net_cls
[    1.383085] Initializing cgroup subsys blkio
[    1.383149] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    1.383150] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    1.383153] CPU: Physical Processor ID: 0
[    1.383155] CPU: Processor Core ID: 0
[    1.383570] ACPI: Core revision 20110623
[    1.721716] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[    1.721801] NMI watchdog disabled (cpu0): hardware events not enabled
[    1.721884] installing Xen timer for CPU 1
[    1.721978] NMI watchdog disabled (cpu1): hardware events not enabled
[    1.722054] installing Xen timer for CPU 2
[    1.722135] NMI watchdog disabled (cpu2): hardware events not enabled
[    1.722210] installing Xen timer for CPU 3
[    1.722291] NMI watchdog disabled (cpu3): hardware events not enabled
[    1.722306] Brought up 4 CPUs
[    1.722486] devtmpfs: initialized
[    1.724818] PM: Registering ACPI NVS region at cefd5000 (339968 bytes)
[    1.724834] PM: Registering ACPI NVS region at cf5a5000 (69632 bytes)
[    1.724839] PM: Registering ACPI NVS region at cf5cf000 (4096 bytes)
[    1.724841] PM: Registering ACPI NVS region at cf5d8000 (40960 bytes)
[    1.724844] PM: Registering ACPI NVS region at cf63e000 (274432 bytes)
[    1.724925] Grant table initialized
[    1.724968] print_constraints: dummy: 
[    1.725019] NET: Registered protocol family 16
[    1.725145] ACPI: bus type pci registered
[    1.725208] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    1.725211] PCI: not using MMCONFIG
[    1.725212] PCI: Using configuration type 1 for base access
[    1.725793] bio: create slab <bio-0> at 0
[    1.725888] ACPI: Added _OSI(Module Device)
[    1.725891] ACPI: Added _OSI(Processor Device)
[    1.725893] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.725895] ACPI: Added _OSI(Processor Aggregator Device)
[    1.727510] ACPI: EC: Look up EC in DSDT
[    1.729089] ACPI: Executed 1 blocks of module-level executable AML code
[    1.734026] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    1.734032] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110623/nsinit-349)
[    1.734456] ACPI: SSDT 00000000cf5d8c18 0038C (v01    AMI      IST 00000001 MSFT 03000001)
[    1.734956] ACPI: Dynamic OEM Table Load:
[    1.734958] ACPI: SSDT           (null) 0038C (v01    AMI      IST 00000001 MSFT 03000001)
[    1.734999] ACPI: SSDT 00000000cf5d9e18 00084 (v01    AMI      CST 00000001 MSFT 03000001)
[    1.735407] ACPI: Dynamic OEM Table Load:
[    1.735409] ACPI: SSDT           (null) 00084 (v01    AMI      CST 00000001 MSFT 03000001)
[    1.736194] ACPI: Interpreter enabled
[    1.736197] ACPI: (supports S0 S1 S3 S4 S5)
[    1.736223] ACPI: Using IOAPIC for interrupt routing
[    1.736252] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    1.736368] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[    1.749627] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    1.757003] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    1.757203] ACPI: No dock devices found.
[    1.757205] HEST: Table not found.
[    1.757207] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.757526] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.757888] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.757890] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.757892] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.757893] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
[    1.757895] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
[    1.757899] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cffff])
[    1.757913] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[    1.757984] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[    1.758043] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.758046] pci 0000:00:01.0: PME# disabled
[    1.758124] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    1.758159] pci 0000:00:16.0: reg 10: [mem 0xfe729000-0xfe72900f 64bit]
[    1.758254] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.758259] pci 0000:00:16.0: PME# disabled
[    1.758304] pci 0000:00:19.0: [8086:1503] type 0 class 0x000200
[    1.758333] pci 0000:00:19.0: reg 10: [mem 0xfe700000-0xfe71ffff]
[    1.758346] pci 0000:00:19.0: reg 14: [mem 0xfe728000-0xfe728fff]
[    1.758359] pci 0000:00:19.0: reg 18: [io  0xf040-0xf05f]
[    1.758440] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    1.758445] pci 0000:00:19.0: PME# disabled
[    1.758480] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    1.758511] pci 0000:00:1a.0: reg 10: [mem 0xfe727000-0xfe7273ff]
[    1.758625] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.758631] pci 0000:00:1a.0: PME# disabled
[    1.758667] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    1.758690] pci 0000:00:1b.0: reg 10: [mem 0xfe720000-0xfe723fff 64bit]
[    1.758780] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.758785] pci 0000:00:1b.0: PME# disabled
[    1.758818] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    1.758917] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.758922] pci 0000:00:1c.0: PME# disabled
[    1.758957] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[    1.759056] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.759061] pci 0000:00:1c.1: PME# disabled
[    1.759097] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[    1.759196] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.759201] pci 0000:00:1c.2: PME# disabled
[    1.759238] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[    1.759338] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.759342] pci 0000:00:1c.4: PME# disabled
[    1.759379] pci 0000:00:1c.6: [8086:244e] type 1 class 0x000604
[    1.759478] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    1.759483] pci 0000:00:1c.6: PME# disabled
[    1.759526] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    1.759558] pci 0000:00:1d.0: reg 10: [mem 0xfe726000-0xfe7263ff]
[    1.759672] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.759677] pci 0000:00:1d.0: PME# disabled
[    1.759710] pci 0000:00:1f.0: [8086:1c46] type 0 class 0x000601
[    1.759879] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
[    1.759910] pci 0000:00:1f.2: reg 10: [io  0xf090-0xf097]
[    1.759922] pci 0000:00:1f.2: reg 14: [io  0xf080-0xf083]
[    1.759935] pci 0000:00:1f.2: reg 18: [io  0xf070-0xf077]
[    1.759947] pci 0000:00:1f.2: reg 1c: [io  0xf060-0xf063]
[    1.759959] pci 0000:00:1f.2: reg 20: [io  0xf020-0xf03f]
[    1.759971] pci 0000:00:1f.2: reg 24: [mem 0xfe725000-0xfe7257ff]
[    1.760028] pci 0000:00:1f.2: PME# supported from D3hot
[    1.760032] pci 0000:00:1f.2: PME# disabled
[    1.760058] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    1.760082] pci 0000:00:1f.3: reg 10: [mem 0xfe724000-0xfe7240ff 64bit]
[    1.760116] pci 0000:00:1f.3: reg 20: [io  0xf000-0xf01f]
[    1.760218] pci 0000:01:00.0: [1002:68f9] type 0 class 0x000300
[    1.760238] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.760254] pci 0000:01:00.0: reg 18: [mem 0xfe620000-0xfe63ffff 64bit]
[    1.760265] pci 0000:01:00.0: reg 20: [io  0xe000-0xe0ff]
[    1.760286] pci 0000:01:00.0: reg 30: [mem 0xfe600000-0xfe61ffff pref]
[    1.760314] pci 0000:01:00.0: supports D1 D2
[    1.760345] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
[    1.760365] pci 0000:01:00.1: reg 10: [mem 0xfe640000-0xfe643fff 64bit]
[    1.760440] pci 0000:01:00.1: supports D1 D2
[    1.766223] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.766226] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    1.766230] pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    1.766236] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.766307] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.766425] pci 0000:03:00.0: [1033:0194] type 0 class 0x000c03
[    1.766459] pci 0000:03:00.0: reg 10: [mem 0xfe500000-0xfe501fff 64bit]
[    1.766606] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    1.766612] pci 0000:03:00.0: PME# disabled
[    1.774327] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.774335] pci 0000:00:1c.1:   bridge window [mem 0xfe500000-0xfe5fffff]
[    1.774412] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    1.774530] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03
[    1.774564] pci 0000:05:00.0: reg 10: [mem 0xfe400000-0xfe401fff 64bit]
[    1.774711] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    1.774717] pci 0000:05:00.0: PME# disabled
[    1.782424] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[    1.782433] pci 0000:00:1c.4:   bridge window [mem 0xfe400000-0xfe4fffff]
[    1.782530] pci 0000:06:00.0: [1b21:1080] type 1 class 0x000604
[    1.782669] pci 0000:00:1c.6: PCI bridge to [bus 06-07] (subtractive decode)
[    1.782674] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    1.782679] pci 0000:00:1c.6:   bridge window [mem 0xfe300000-0xfe3fffff]
[    1.782688] pci 0000:00:1c.6:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.782690] pci 0000:00:1c.6:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.782692] pci 0000:00:1c.6:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.782694] pci 0000:00:1c.6:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[    1.782779] pci 0000:07:03.0: [1106:3044] type 0 class 0x000c00
[    1.782819] pci 0000:07:03.0: reg 10: [mem 0xfe300000-0xfe3007ff]
[    1.782841] pci 0000:07:03.0: reg 14: [io  0xd000-0xd07f]
[    1.782988] pci 0000:07:03.0: supports D2
[    1.782989] pci 0000:07:03.0: PME# supported from D2 D3hot D3cold
[    1.782997] pci 0000:07:03.0: PME# disabled
[    1.783093] pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
[    1.783106] pci 0000:06:00.0:   bridge window [io  0xd000-0xdfff]
[    1.783112] pci 0000:06:00.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    1.783125] pci 0000:06:00.0:   bridge window [io  0xd000-0xdfff] (subtractive decode)
[    1.783127] pci 0000:06:00.0:   bridge window [mem 0xfe300000-0xfe3fffff] (subtractive decode)
[    1.783129] pci 0000:06:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    1.783131] pci 0000:06:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    1.783133] pci 0000:06:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.783135] pci 0000:06:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.783137] pci 0000:06:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.783139] pci 0000:06:00.0:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[    1.783196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.783370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    1.783417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    1.783461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    1.783504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    1.783550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    1.783597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[    1.783643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.BR24._PRT]
[    1.783884]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.784257]  pci0000:00: ACPI _OSC control (0x1c) granted
[    1.789877] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    1.789936] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    1.789994] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    1.790051] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    1.790109] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    1.790166] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    1.790223] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    1.790280] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    1.790317] xen/balloon: Initialising balloon driver.
[    1.790319] last_pfn = 0x25effa max_arch_pfn = 0x400000000
[    1.793453] xen-balloon: Initialising balloon driver.
[    1.793554] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.793559] vgaarb: loaded
[    1.793560] vgaarb: bridge control possible 0000:01:00.0
[    1.793592] PCI: Using ACPI for IRQ routing
[    1.796141] PCI: pci_cache_line_size set to 64 bytes
[    1.796237] reserve RAM buffer: 000000000009d000 - 000000000009ffff 
[    1.796239] reserve RAM buffer: 00000000cefd5000 - 00000000cfffffff 
[    1.796243] reserve RAM buffer: 00000000cf5cf000 - 00000000cfffffff 
[    1.796246] reserve RAM buffer: 00000000cf800000 - 00000000cfffffff 
[    1.796247] reserve RAM buffer: 000000025effa000 - 000000025fffffff 
[    1.796345] Switching to clocksource xen
[    1.797761] pnp: PnP ACPI init
[    1.797771] ACPI: bus type pnp registered
[    1.797982] pnp 00:00: [bus 00-ff]
[    1.797984] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.797986] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.797988] pnp 00:00: [io  0x0d00-0xffff window]
[    1.797990] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.797991] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[    1.797993] pnp 00:00: [mem 0xd0000000-0xffffffff window]
[    1.797995] pnp 00:00: [mem 0x00000000 window]
[    1.798055] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.798149] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[    1.798151] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[    1.798153] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[    1.798154] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    1.798156] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[    1.798189] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[    1.798191] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[    1.798193] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.798195] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.798198] system 00:01: [mem 0xfee00000-0xfee0ffff] could not be reserved
[    1.798201] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.798291] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    1.798293] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    1.798294] pnp 00:02: [io  0x0290-0x029f]
[    1.798296] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    1.798329] system 00:02: [io  0x0290-0x029f] has been reserved
[    1.798331] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.798344] pnp 00:03: [dma 4]
[    1.798345] pnp 00:03: [io  0x0000-0x000f]
[    1.798348] pnp 00:03: [io  0x0081-0x0083]
[    1.798349] pnp 00:03: [io  0x0087]
[    1.798351] pnp 00:03: [io  0x0089-0x008b]
[    1.798352] pnp 00:03: [io  0x008f]
[    1.798354] pnp 00:03: [io  0x00c0-0x00df]
[    1.798372] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.798383] pnp 00:04: [io  0x0070-0x0071]
[    1.798385] xen: registering gsi 8 triggering 1 polarity 0
[    1.798389] xen_map_pirq_gsi: returning irq 8 for gsi 8
[    1.798391] xen: --> pirq=8 -> irq=8 (gsi=8)
[    1.798396] pnp 00:04: [irq 8]
[    1.798414] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.798423] pnp 00:05: [io  0x0061]
[    1.798448] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.798466] pnp 00:06: [io  0x0010-0x001f]
[    1.798468] pnp 00:06: [io  0x0022-0x003f]
[    1.798469] pnp 00:06: [io  0x0044-0x005f]
[    1.798471] pnp 00:06: [io  0x0063]
[    1.798472] pnp 00:06: [io  0x0065]
[    1.798474] pnp 00:06: [io  0x0067-0x006f]
[    1.798475] pnp 00:06: [io  0x0072-0x007f]
[    1.798477] pnp 00:06: [io  0x0080]
[    1.798478] pnp 00:06: [io  0x0084-0x0086]
[    1.798480] pnp 00:06: [io  0x0088]
[    1.798481] pnp 00:06: [io  0x008c-0x008e]
[    1.798483] pnp 00:06: [io  0x0090-0x009f]
[    1.798484] pnp 00:06: [io  0x00a2-0x00bf]
[    1.798486] pnp 00:06: [io  0x00e0-0x00ef]
[    1.798487] pnp 00:06: [io  0x04d0-0x04d1]
[    1.798522] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    1.798524] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.798533] pnp 00:07: [io  0x00f0-0x00ff]
[    1.798535] xen: registering gsi 13 triggering 1 polarity 0
[    1.798537] xen_map_pirq_gsi: returning irq 13 for gsi 13
[    1.798538] xen: --> pirq=13 -> irq=13 (gsi=13)
[    1.798542] pnp 00:07: [irq 13]
[    1.798562] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.798944] pnp 00:08: [io  0x03f8-0x03ff]
[    1.798946] xen: registering gsi 4 triggering 1 polarity 0
[    1.798948] xen_map_pirq_gsi: returning irq 4 for gsi 4
[    1.798949] xen: --> pirq=4 -> irq=4 (gsi=4)
[    1.798953] pnp 00:08: [irq 4]
[    1.798954] pnp 00:08: [dma 0 disabled]
[    1.799002] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.799226] pnp 00:09: [io  0x0400-0x0453]
[    1.799228] pnp 00:09: [io  0x0458-0x047f]
[    1.799230] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
[    1.799232] pnp 00:09: [io  0x0500-0x057f]
[    1.799233] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    1.799235] pnp 00:09: [mem 0xfec00000-0xfecfffff]
[    1.799236] pnp 00:09: [mem 0xfed08000-0xfed08fff]
[    1.799238] pnp 00:09: [mem 0xff000000-0xffffffff]
[    1.799274] system 00:09: [io  0x0400-0x0453] has been reserved
[    1.799276] system 00:09: [io  0x0458-0x047f] has been reserved
[    1.799278] system 00:09: [io  0x0500-0x057f] has been reserved
[    1.799281] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.799283] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
[    1.799285] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
[    1.799288] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[    1.799290] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.799341] pnp 00:0a: [io  0x0454-0x0457]
[    1.799374] system 00:0a: [io  0x0454-0x0457] has been reserved
[    1.799376] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.799552] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[    1.799588] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.799773] pnp: PnP ACPI: found 12 devices
[    1.799775] ACPI: ACPI bus type pnp unregistered
[    1.800306] Switched to NOHz mode on CPU #0
[    1.802875] Switched to NOHz mode on CPU #1
[    1.803034] Switched to NOHz mode on CPU #2
[    1.803191] Switched to NOHz mode on CPU #3
[    1.804924] PM-Timer failed consistency check  (0x0xffffff) - aborting.
[    1.804936] PCI: max bus depth: 2 pci_try_num: 3
[    1.805016] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.805019] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    1.805024] pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    1.805028] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.805034] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.805051] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.805057] pci 0000:00:1c.1:   bridge window [mem 0xfe500000-0xfe5fffff]
[    1.805069] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    1.805085] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[    1.805092] pci 0000:00:1c.4:   bridge window [mem 0xfe400000-0xfe4fffff]
[    1.805104] pci 0000:06:00.0: PCI bridge to [bus 07-07]
[    1.805108] pci 0000:06:00.0:   bridge window [io  0xd000-0xdfff]
[    1.805117] pci 0000:06:00.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    1.805135] pci 0000:00:1c.6: PCI bridge to [bus 06-07]
[    1.805138] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    1.805145] pci 0000:00:1c.6:   bridge window [mem 0xfe300000-0xfe3fffff]
[    1.805161] xen: registering gsi 16 triggering 0 polarity 1
[    1.805170] xen: --> pirq=16 -> irq=16 (gsi=16)
[    1.805173] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.805177] pci 0000:00:01.0: setting latency timer to 64
[    1.805184] xen: registering gsi 17 triggering 0 polarity 1
[    1.805188] xen: --> pirq=17 -> irq=17 (gsi=17)
[    1.805191] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.805196] pci 0000:00:1c.0: setting latency timer to 64
[    1.805203] xen: registering gsi 16 triggering 0 polarity 1
[    1.805205] xen_map_pirq_gsi: returning irq 16 for gsi 16
[    1.805207] xen: --> pirq=16 -> irq=16 (gsi=16)
[    1.805208] Already setup the GSI :16
[    1.805210] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.805215] pci 0000:00:1c.1: setting latency timer to 64
[    1.805222] xen: registering gsi 18 triggering 0 polarity 1
[    1.805226] xen: --> pirq=18 -> irq=18 (gsi=18)
[    1.805228] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.805233] pci 0000:00:1c.2: setting latency timer to 64
[    1.805240] xen: registering gsi 17 triggering 0 polarity 1
[    1.805242] xen_map_pirq_gsi: returning irq 17 for gsi 17
[    1.805244] xen: --> pirq=17 -> irq=17 (gsi=17)
[    1.805245] Already setup the GSI :17
[    1.805246] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.805251] pci 0000:00:1c.4: setting latency timer to 64
[    1.805259] xen: registering gsi 18 triggering 0 polarity 1
[    1.805260] xen_map_pirq_gsi: returning irq 18 for gsi 18
[    1.805262] xen: --> pirq=18 -> irq=18 (gsi=18)
[    1.805263] Already setup the GSI :18
[    1.805265] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.805270] pci 0000:00:1c.6: setting latency timer to 64
[    1.805277] xen: registering gsi 18 triggering 0 polarity 1
[    1.805278] xen_map_pirq_gsi: returning irq 18 for gsi 18
[    1.805280] xen: --> pirq=18 -> irq=18 (gsi=18)
[    1.805281] Already setup the GSI :18
[    1.805283] pci 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.805289] pci 0000:06:00.0: setting latency timer to 64
[    1.805294] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.805296] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.805297] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.805299] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xffffffff]
[    1.805301] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    1.805302] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
[    1.805304] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.805306] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
[    1.805308] pci_bus 0000:05: resource 1 [mem 0xfe400000-0xfe4fffff]
[    1.805309] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
[    1.805311] pci_bus 0000:06: resource 1 [mem 0xfe300000-0xfe3fffff]
[    1.805313] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    1.805314] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    1.805316] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    1.805317] pci_bus 0000:06: resource 7 [mem 0xd0000000-0xffffffff]
[    1.805319] pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
[    1.805321] pci_bus 0000:07: resource 1 [mem 0xfe300000-0xfe3fffff]
[    1.805322] pci_bus 0000:07: resource 4 [io  0xd000-0xdfff]
[    1.805324] pci_bus 0000:07: resource 5 [mem 0xfe300000-0xfe3fffff]
[    1.805325] pci_bus 0000:07: resource 8 [io  0x0000-0x0cf7]
[    1.805327] pci_bus 0000:07: resource 9 [io  0x0d00-0xffff]
[    1.805328] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
[    1.805330] pci_bus 0000:07: resource 11 [mem 0xd0000000-0xffffffff]
[    1.805383] NET: Registered protocol family 2
[    1.806251] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    1.808197] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.809238] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.809337] TCP: Hash tables configured (established 524288 bind 65536)
[    1.809339] TCP reno registered
[    1.809393] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    1.809489] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    1.809613] NET: Registered protocol family 1
[    1.809712] pci 0000:01:00.0: Boot video device
[    1.809784] PCI: CLS 64 bytes, default 64
[    1.809816] Unpacking initramfs...
[    1.839536] Freeing initrd memory: 44944k freed
[    1.846432] audit: initializing netlink socket (disabled)
[    1.846441] type=2000 audit(1321996043.510:1): initialized
[    1.861439] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.861642] VFS: Disk quotas dquot_6.5.2
[    1.861664] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.861720] msgmni has been set to 13867
[    1.861848] alg: No test for stdrng (krng)
[    1.861874] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.861877] io scheduler noop registered
[    1.861878] io scheduler deadline registered
[    1.861895] io scheduler cfq registered (default)
[    1.861976] pcieport 0000:00:01.0: setting latency timer to 64
[    1.862110] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.862271] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.862433] pcieport 0000:00:1c.2: setting latency timer to 64
[    1.862594] pcieport 0000:00:1c.4: setting latency timer to 64
[    1.862774] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    1.862776] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.862778] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    1.862782] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    1.862804] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.862809] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.862831] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    1.862833] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.862838] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    1.862861] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    1.862867] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    1.862888] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    1.862890] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    1.862895] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    1.862981] ERST: Table is not found!
[    1.862982] GHES: HEST is not enabled!
[    1.863287] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.883841] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.065107] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.096578] hpet_acpi_add: no address or irqs in _CRS
[    2.096586] Linux agpgart interface v0.103
[    2.096732] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.099360] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.099365] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.099468] mousedev: PS/2 mouse device common for all mice
[    2.099507] rtc_cmos 00:04: RTC can wake from S4
[    2.099624] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.099653] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    2.099766] TCP cubic registered
[    2.099812] NET: Registered protocol family 10
[    2.100084] Mobile IPv6
[    2.100086] NET: Registered protocol family 17
[    2.100090] Registering the dns_resolver key type
[    2.100190] PM: Hibernation image not present or could not be loaded.
[    2.100197] registered taskstats version 1
[    2.100664] rtc_cmos 00:04: setting system clock to 2011-11-22 21:07:23 UTC (1321996043)
[    2.100710] Initializing network drop monitor service
[    2.100917] Freeing unused kernel memory: 556k freed
[    2.100972] Write protecting the kernel read-only data: 6144k
[    2.102955] Freeing unused kernel memory: 788k freed
[    2.103222] Freeing unused kernel memory: 696k freed
[    2.165772] udevd[61]: starting version 172
[    2.183265] e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
[    2.183267] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    2.183290] xen: registering gsi 18 triggering 0 polarity 1
[    2.183295] xen_map_pirq_gsi: returning irq 18 for gsi 18
[    2.183297] xen: --> pirq=18 -> irq=18 (gsi=18)
[    2.183299] Already setup the GSI :18
[    2.183302] e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.183312] e1000e 0000:00:19.0: setting latency timer to 64
[    2.186274] usbcore: registered new interface driver usbfs
[    2.186292] usbcore: registered new interface driver hub
[    2.189677] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    2.189683] ACPI: Power Button [PWRB]
[    2.189719] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    2.189721] ACPI: Power Button [PWRF]
[    2.191684] [drm] Initialized drm 1.1.0 20060810
[    2.194114] usbcore: registered new device driver usb
[    2.194657] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.197964] xen: registering gsi 17 triggering 0 polarity 1
[    2.197971] xen_map_pirq_gsi: returning irq 17 for gsi 17
[    2.197973] xen: --> pirq=17 -> irq=17 (gsi=17)
[    2.197975] Already setup the GSI :17
[    2.197978] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.198000] xhci_hcd 0000:03:00.0: setting latency timer to 64
[    2.198004] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.198022] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    2.198224] xhci_hcd 0000:03:00.0: irq 17, io mem 0xfe500000
[    2.198814] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.198816] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.198819] usb usb1: Product: xHCI Host Controller
[    2.198820] usb usb1: Manufacturer: Linux 3.1.0-1-amd64 xhci_hcd
[    2.198822] usb usb1: SerialNumber: 0000:03:00.0
[    2.200702] SCSI subsystem initialized
[    2.201768] xHCI xhci_add_endpoint called for root hub
[    2.201770] xHCI xhci_check_bandwidth called for root hub
[    2.201794] hub 1-0:1.0: USB hub found
[    2.201801] hub 1-0:1.0: 2 ports detected
[    2.201859] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.201865] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    2.201893] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    2.201895] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.201896] usb usb2: Product: xHCI Host Controller
[    2.201898] usb usb2: Manufacturer: Linux 3.1.0-1-amd64 xhci_hcd
[    2.201899] usb usb2: SerialNumber: 0000:03:00.0
[    2.202094] xHCI xhci_add_endpoint called for root hub
[    2.202095] xHCI xhci_check_bandwidth called for root hub
[    2.202122] hub 2-0:1.0: USB hub found
[    2.202131] hub 2-0:1.0: 2 ports detected
[    2.202187] xen: registering gsi 16 triggering 0 polarity 1
[    2.202193] xen_map_pirq_gsi: returning irq 16 for gsi 16
[    2.202195] xen: --> pirq=16 -> irq=16 (gsi=16)
[    2.202197] Already setup the GSI :16
[    2.202199] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.202228] xhci_hcd 0000:05:00.0: setting latency timer to 64
[    2.202233] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    2.202240] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[    2.202430] xhci_hcd 0000:05:00.0: irq 16, io mem 0xfe400000
[    2.203245] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.203248] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.203249] usb usb3: Product: xHCI Host Controller
[    2.203251] usb usb3: Manufacturer: Linux 3.1.0-1-amd64 xhci_hcd
[    2.203252] usb usb3: SerialNumber: 0000:05:00.0
[    2.203313] xHCI xhci_add_endpoint called for root hub
[    2.203315] xHCI xhci_check_bandwidth called for root hub
[    2.203337] hub 3-0:1.0: USB hub found
[    2.203344] hub 3-0:1.0: 2 ports detected
[    2.203395] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    2.203401] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[    2.205827] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.205829] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.205831] usb usb4: Product: xHCI Host Controller
[    2.205832] usb usb4: Manufacturer: Linux 3.1.0-1-amd64 xhci_hcd
[    2.205834] usb usb4: SerialNumber: 0000:05:00.0
[    2.207339] [drm] radeon kernel modesetting enabled.
[    2.207358] xHCI xhci_add_endpoint called for root hub
[    2.207360] xHCI xhci_check_bandwidth called for root hub
[    2.207386] hub 4-0:1.0: USB hub found
[    2.207388] xen: registering gsi 16 triggering 0 polarity 1
[    2.207393] xen_map_pirq_gsi: returning irq 16 for gsi 16
[    2.207394] xen: --> pirq=16 -> irq=16 (gsi=16)
[    2.207396] hub 4-0:1.0: 2 ports detected
[    2.207397] Already setup the GSI :16
[    2.207400] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.207405] radeon 0000:01:00.0: setting latency timer to 64
[    2.209405] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1043:0x03CA).
[    2.209445] [drm] register mmio base: 0xFE620000
[    2.209446] [drm] register mmio size: 131072
[    2.209641] ATOM BIOS: 68F9.12.20.0.48.AS03
[    2.209710] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    2.209712] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    2.209715] [drm] Detected VRAM RAM=1024M, BAR=256M
[    2.209717] [drm] RAM width 64bits DDR
[    2.211133] libata version 3.00 loaded.
[    2.213125] [TTM] Zone  kernel: Available graphics memory: 3551072 kiB.
[    2.213127] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[    2.213129] [TTM] Initializing pool allocator.
[    2.213146] [drm] radeon: 1024M of VRAM memory ready
[    2.213147] [drm] radeon: 512M of GTT memory ready.
[    2.213158] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.213160] [drm] Driver supports precise vblank timestamp query.
[    2.213429] radeon 0000:01:00.0: radeon: using MSI.
[    2.213461] [drm] radeon: irq initialized.
[    2.213465] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.213823] [drm] Loading CEDAR Microcode
[    2.215270] xen: registering gsi 17 triggering 0 polarity 1
[    2.215275] xen_map_pirq_gsi: returning irq 17 for gsi 17
[    2.215277] xen: --> pirq=17 -> irq=17 (gsi=17)
[    2.215278] Already setup the GSI :17
[    2.215281] firewire_ohci 0000:07:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.236667] radeon 0000:01:00.0: WB enabled
[    2.252972] [drm] ring test succeeded in 1 usecs
[    2.253203] [drm] radeon: ib pool ready.
[    2.253248] [drm] ib test succeeded in 0 usecs
[    2.253254] failed to evaluate ATIF got AE_BAD_PARAMETER
[    2.253451] [drm] Radeon Display Connectors
[    2.253452] [drm] Connector 0:
[    2.253453] [drm]   HDMI-A
[    2.253454] [drm]   HPD1
[    2.253456] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    2.253458] [drm]   Encoders:
[    2.253459] [drm]     DFP1: INTERNAL_UNIPHY1
[    2.253460] [drm] Connector 1:
[    2.253461] [drm]   DVI-I
[    2.253462] [drm]   HPD4
[    2.253464] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[    2.253465] [drm]   Encoders:
[    2.253466] [drm]     DFP2: INTERNAL_UNIPHY
[    2.253468] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    2.253469] [drm] Connector 2:
[    2.253470] [drm]   VGA
[    2.253471] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    2.253473] [drm]   Encoders:
[    2.253474] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.263221] [drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID
[    2.280472] firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[    2.315589] [drm] Radeon display connector DVI-I-1: Found valid EDID
[    2.325284] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID
[    2.325302] [drm] Internal thermal controller without fan control
[    2.325335] [drm] radeon: power management initialized
[    2.408703] [drm] fb mappable at 0xD0141000
[    2.408705] [drm] vram apper at 0xD0000000
[    2.408707] [drm] size 7299072
[    2.408708] [drm] fb depth is 24
[    2.408709] [drm]    pitch is 6912
[    2.418477] fbcon: radeondrmfb (fb0) is primary device
[    2.479196] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f4:6d:04:13:b4:db
[    2.479198] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    2.479237] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    2.479267] xen: registering gsi 23 triggering 0 polarity 1
[    2.479276] xen: --> pirq=23 -> irq=23 (gsi=23)
[    2.479280] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.479296] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.479299] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    2.479307] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
[    2.479351] ehci_hcd 0000:00:1a.0: debug port 2
[    2.483246] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    2.483265] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfe727000
[    2.496413] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.496429] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    2.496430] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.496432] usb usb5: Product: EHCI Host Controller
[    2.496433] usb usb5: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd
[    2.496434] usb usb5: SerialNumber: 0000:00:1a.0
[    2.496517] hub 5-0:1.0: USB hub found
[    2.496521] hub 5-0:1.0: 2 ports detected
[    2.496572] xen: registering gsi 23 triggering 0 polarity 1
[    2.496575] xen_map_pirq_gsi: returning irq 23 for gsi 23
[    2.496576] xen: --> pirq=23 -> irq=23 (gsi=23)
[    2.496577] Already setup the GSI :23
[    2.496579] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.496602] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.496605] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    2.496613] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    2.496646] ehci_hcd 0000:00:1d.0: debug port 2
[    2.500518] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    2.500532] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe726000
[    2.516412] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.516426] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    2.516427] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.516428] usb usb6: Product: EHCI Host Controller
[    2.516430] usb usb6: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd
[    2.516431] usb usb6: SerialNumber: 0000:00:1d.0
[    2.516503] hub 6-0:1.0: USB hub found
[    2.516506] hub 6-0:1.0: 2 ports detected
[    2.516559] ahci 0000:00:1f.2: version 3.0
[    2.516568] xen: registering gsi 20 triggering 0 polarity 1
[    2.516579] xen: --> pirq=20 -> irq=20 (gsi=20)
[    2.516584] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    2.516699] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    2.516702] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    2.516706] ahci 0000:00:1f.2: setting latency timer to 64
[    2.524928] scsi0 : ahci
[    2.525020] scsi1 : ahci
[    2.525087] scsi2 : ahci
[    2.525154] scsi3 : ahci
[    2.525220] scsi4 : ahci
[    2.525285] scsi5 : ahci
[    2.525459] ata1: SATA max UDMA/133 abar m2048@0xfe725000 port 0xfe725100 irq 311
[    2.525461] ata2: SATA max UDMA/133 abar m2048@0xfe725000 port 0xfe725180 irq 311
[    2.525463] ata3: DUMMY
[    2.525463] ata4: DUMMY
[    2.525464] ata5: DUMMY
[    2.525465] ata6: DUMMY
[    2.640912] Console: switching to colour frame buffer device 210x65
[    2.645317] fb0: radeondrmfb frame buffer device
[    2.645319] drm: registered panic notifier
[    2.645323] [drm] Initialized radeon 2.11.0 20080528 for 0000:01:00.0 on minor 0
[    2.780477] firewire_core: created device fw0: GUID 001fc600000f2661, S400
[    2.808416] usb 5-1: new high speed USB device number 2 using ehci_hcd
[    2.844429] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.844445] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.849527] ata2.00: ATA-7: SAMSUNG SP2004C, VM100-33, max UDMA7
[    2.849529] ata2.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.850060] ata1.00: ATA-8: OCZ-VERTEX2, 1.33, max UDMA/133
[    2.850061] ata1.00: 224674128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.854654] ata2.00: configured for UDMA/133
[    2.860059] ata1.00: configured for UDMA/133
[    2.860134] scsi 0:0:0:0: Direct-Access     ATA      OCZ-VERTEX2      1.33 PQ: 0 ANSI: 5
[    2.860282] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG SP2004C  VM10 PQ: 0 ANSI: 5
[    2.864922] sd 0:0:0:0: [sda] 224674128 512-byte logical blocks: (115 GB/107 GiB)
[    2.864954] sd 1:0:0:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[    2.865014] sd 1:0:0:0: [sdb] Write Protect is off
[    2.865016] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.865060] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.865109] sd 0:0:0:0: [sda] Write Protect is off
[    2.865111] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.865130] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.865531]  sda: sda1 sda2
[    2.865737] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.870910]  sdb: sdb1 sdb2
[    2.871088] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.872997] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.873028] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.940789] usb 5-1: New USB device found, idVendor=8087, idProduct=0024
[    2.940792] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.941227] hub 5-1:1.0: USB hub found
[    2.941292] hub 5-1:1.0: 6 ports detected
[    3.052418] usb 6-1: new high speed USB device number 2 using ehci_hcd
[    3.184779] usb 6-1: New USB device found, idVendor=8087, idProduct=0024
[    3.184781] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.185209] hub 6-1:1.0: USB hub found
[    3.185282] hub 6-1:1.0: 8 ports detected
[    3.256526] usb 5-1.5: new low speed USB device number 3 using ehci_hcd
[    3.354306] usb 5-1.5: New USB device found, idVendor=046d, idProduct=c517
[    3.354309] usb 5-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.354310] usb 5-1.5: Product: USB Receiver
[    3.354312] usb 5-1.5: Manufacturer: Logitech
[    3.358961] usbcore: registered new interface driver usbhid
[    3.358964] usbhid: USB HID core driver
[    3.363449] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.5/5-1.5:1.0/input/input2
[    3.363502] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input0
[    3.368433] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[    3.368721] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.5/5-1.5:1.1/input/input3
[    3.368898] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input1
[    3.431536] device-mapper: uevent: version 1.0.3
[    3.431592] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[    3.456561] usb 6-1.2: new high speed USB device number 3 using ehci_hcd
[    3.549674] usb 6-1.2: New USB device found, idVendor=05e3, idProduct=0608
[    3.549677] usb 6-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.549679] usb 6-1.2: Product: USB2.0 Hub
[    3.550078] hub 6-1.2:1.0: USB hub found
[    3.550426] hub 6-1.2:1.0: 4 ports detected
[    3.820665] usb 6-1.2.2: new high speed USB device number 4 using ehci_hcd
[    3.840201] PM: Starting manual resume from disk
[    3.840204] PM: Hibernation image partition 254:1 present
[    3.840205] PM: Looking for hibernation image.
[    3.840343] PM: Image not found (code -22)
[    3.840344] PM: Hibernation image not present or could not be loaded.
[    3.848269] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    3.914785] usb 6-1.2.2: New USB device found, idVendor=058f, idProduct=6362
[    3.914788] usb 6-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.914790] usb 6-1.2.2: Product: Mass Storage Device
[    3.914791] usb 6-1.2.2: Manufacturer: Generic
[    3.914793] usb 6-1.2.2: SerialNumber: 058F312D81B
[    4.071303] udevd[322]: starting version 172
[    4.124170] ACPI: acpi_idle yielding to (null)
[    4.127264] wmi: Mapper loaded
[    4.171709] xen: registering gsi 18 triggering 0 polarity 1
[    4.171715] xen_map_pirq_gsi: returning irq 18 for gsi 18
[    4.171717] xen: --> pirq=18 -> irq=18 (gsi=18)
[    4.171718] Already setup the GSI :18
[    4.171721] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.173089] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    4.184711] usbcore: registered new interface driver uas
[    4.186252] Initializing USB Mass Storage driver...
[    4.190851] scsi6 : usb-storage 6-1.2.2:1.0
[    4.190991] usbcore: registered new interface driver usb-storage
[    4.190994] USB Mass Storage support registered.
[    4.215511] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.219162] xen: registering gsi 22 triggering 0 polarity 1
[    4.219175] xen: --> pirq=22 -> irq=22 (gsi=22)
[    4.219181] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    4.219287] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    4.220954] asus_wmi: ASUS WMI generic driver loaded
[    4.221674] asus_wmi: Initialization: 0x0
[    4.221707] asus_wmi: BIOS WMI version: 0.9
[    4.221777] asus_wmi: SFUN value: 0x0
[    4.222175] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
[    4.263620] hda_codec: ALC892: BIOS auto-probing.
[    4.270417] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    4.271846] xen: registering gsi 17 triggering 0 polarity 1
[    4.271851] xen_map_pirq_gsi: returning irq 17 for gsi 17
[    4.271853] xen: --> pirq=17 -> irq=17 (gsi=17)
[    4.271855] Already setup the GSI :17
[    4.271857] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    4.272063] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    4.287290] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[    4.287495] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[    4.561893] EXT4-fs (dm-0): re-mounted. Opts: (null)
[    4.588631] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[    4.625694] loop: module loaded
[    4.928801] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[    4.930631] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[    4.932234] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[    4.933511] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[    4.949514] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null)
[    5.143700] RPC: Registered named UNIX socket transport module.
[    5.143702] RPC: Registered udp transport module.
[    5.143704] RPC: Registered tcp transport module.
[    5.143705] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.148555] FS-Cache: Loaded
[    5.155140] FS-Cache: Netfs 'nfs' registered for caching
[    5.160241] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    5.189037] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    5.189530] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    5.190028] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    5.190526] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    5.190556] scsi: killing requests for dead queue
[    5.190595] scsi: killing requests for dead queue
[    5.190629] scsi: killing requests for dead queue
[    5.190663] scsi: killing requests for dead queue
[    5.190697] scsi: killing requests for dead queue
[    5.190730] scsi: killing requests for dead queue
[    5.190764] scsi: killing requests for dead queue
[    5.190798] scsi: killing requests for dead queue
[    5.191247] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    5.191389] sd 6:0:0:1: Attached scsi generic sg3 type 0
[    5.191522] sd 6:0:0:2: Attached scsi generic sg4 type 0
[    5.191666] sd 6:0:0:3: Attached scsi generic sg5 type 0
[    5.201901] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[    5.202935] sd 6:0:0:2: [sde] Attached SCSI removable disk
[    5.203406] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    5.204158] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[    5.239956] fuse init (API version 7.17)
[    5.453371] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.473499] Event-channel device installed.
[    5.507632] XENBUS: Unable to read cpu state
[    5.508306] XENBUS: Unable to read cpu state
[    5.508571] XENBUS: Unable to read cpu state
[    5.508696] XENBUS: Unable to read cpu state
[    5.711276] lp: driver loaded but no devices found
[    5.722503] ppdev: user-space parallel port driver
[    5.846324] Bridge firewalling registered
[    6.365345] ADDRCONF(NETDEV_UP): peth0: link is not ready
[    7.002616] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0
[    7.007234] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[    7.009957] EXT4-fs (dm-4): re-mounted. Opts: commit=0
[    7.012649] EXT4-fs (dm-3): re-mounted. Opts: commit=0
[    7.015334] EXT4-fs (dm-5): re-mounted. Opts: commit=0
[    7.030043] EXT4-fs (sdb1): re-mounted. Opts: commit=0
[    8.095236] e1000e: peth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[    8.095239] e1000e 0000:00:19.0: peth0: 10/100 speed: disabling TSO
[    8.095980] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
[    8.378713] device peth0 entered promiscuous mode
[    8.403731] eth0: port 1(peth0) entering forwarding state
[    8.403738] eth0: port 1(peth0) entering forwarding state
[   18.596614] eth0: no IPv6 routers present
[   18.892619] peth0: no IPv6 routers present
[   31.861101] Adding 9764860k swap on /dev/mapper/vg0-swap.  Priority:-1 extents:1 across:9764860k 
[  173.091939] pygrub[3183] trap invalid opcode ip:7fd1ee304c50 sp:7ffff33daf28 error:0 in ld-2.13.so[7fd1ee2f1000+1f000]

% xm dmesg
(XEN) Xen version 4.1.1 (Debian 4.1.1-3) (waldi@debian.org) (gcc version 4.6.1 (Debian 4.6.1-16) ) Wed Oct 26 12:44:59 UTC 2011
(XEN) Bootloader: GRUB 1.99-12
(XEN) Command line: placeholder xsave=0
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN)  Found 2 MBR signatures
(XEN)  Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009d800 (usable)
(XEN)  000000000009d800 - 00000000000a0000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000cefd5000 (usable)
(XEN)  00000000cefd5000 - 00000000cf028000 (ACPI NVS)
(XEN)  00000000cf028000 - 00000000cf5a5000 (reserved)
(XEN)  00000000cf5a5000 - 00000000cf5b6000 (ACPI NVS)
(XEN)  00000000cf5b6000 - 00000000cf5cd000 (reserved)
(XEN)  00000000cf5cd000 - 00000000cf5cf000 (usable)
(XEN)  00000000cf5cf000 - 00000000cf5d0000 (ACPI NVS)
(XEN)  00000000cf5d0000 - 00000000cf5d8000 (reserved)
(XEN)  00000000cf5d8000 - 00000000cf5e2000 (ACPI NVS)
(XEN)  00000000cf5e2000 - 00000000cf63e000 (reserved)
(XEN)  00000000cf63e000 - 00000000cf681000 (ACPI NVS)
(XEN)  00000000cf681000 - 00000000cf800000 (usable)
(XEN)  00000000fed1c000 - 00000000fed20000 (reserved)
(XEN)  00000000ff000000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 000000022f800000 (usable)
(XEN) ACPI: RSDP 000F0420, 0024 (r2 ALASKA)
(XEN) ACPI: XSDT CF01F068, 004C (r1 ALASKA    A M I  1072009 AMI     10013)
(XEN) ACPI: FACP CF0279D8, 00F4 (r4 ALASKA    A M I  1072009 AMI     10013)
(XEN) ACPI: DSDT CF01F140, 8891 (r2 ALASKA    A M I        0 INTL 20051117)
(XEN) ACPI: FACS CF5D9F80, 0040
(XEN) ACPI: APIC CF027AD0, 0072 (r3 ALASKA    A M I  1072009 AMI     10013)
(XEN) ACPI: SSDT CF027B48, 0102 (r1 AMICPU     PROC        1 MSFT  3000001)
(XEN) ACPI: MCFG CF027C50, 003C (r1 ALASKA    A M I  1072009 MSFT       97)
(XEN) ACPI: HPET CF027C90, 0038 (r1 ALASKA    A M I  1072009 AMI.        4)
(XEN) System RAM: 8168MB (8365004kB)
(XEN) Domain heap initialised
(XEN) ACPI: 32/64X FACS address mismatch in FADT - cf5d9f80/0000000000000000, using 32
(XEN) Processor #0 6:10 APIC version 21
(XEN) Processor #2 6:10 APIC version 21
(XEN) Processor #4 6:10 APIC version 21
(XEN) Processor #6 6:10 APIC version 21
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) Table is not found!
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3310.914 MHz processor.
(XEN) Initing memory sharing.
(XEN) I/O virtualisation disabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using old ACK method
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN)  - APIC MMIO access virtualisation
(XEN)  - APIC TPR shadow
(XEN)  - Extended Page Tables (EPT)
(XEN)  - Virtual-Processor Identifiers (VPID)
(XEN)  - Virtual NMI
(XEN)  - MSR direct-access bitmap
(XEN)  - Unrestricted Guest
(XEN) EPT supports 2MB super page.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Brought up 4 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN)  Xen  kernel: 64-bit, lsb, compat32
(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1934000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000220000000->0000000224000000 (2006530 pages to be allocated)
(XEN)  Init. ramdisk: 000000022cc1c000->000000022f7ff200
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff81000000->ffffffff81934000
(XEN)  Init. ramdisk: ffffffff81934000->ffffffff84517200
(XEN)  Phys-Mach map: ffffffff84518000->ffffffff8549cf30
(XEN)  Start info:    ffffffff8549d000->ffffffff8549d4b4
(XEN)  Page tables:   ffffffff8549e000->ffffffff854cd000
(XEN)  Boot stack:    ffffffff854cd000->ffffffff854ce000
(XEN)  TOTAL:         ffffffff80000000->ffffffff85800000
(XEN)  ENTRY ADDRESS: ffffffff816a5200
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 224kB init memory.
