[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_amd64_5 #17454
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Thu Dec 10 00:13:01 UTC 2015
See <https://jenkins.debian.net/job/reproducible_builder_amd64_5/17454/>
------------------------------------------
[...truncated 2112 lines...]
- Error callback handling PASS 0.100894000s
+ Send data (IPv4, stream) PASS 0.301796000s
+ Send data (IPv4, datagram) PASS 0.301041000s
+ Send data (IPv6, stream) PASS 0.301557000s
+ Send data (IPv6, datagram) PASS 0.300977000s
+ Data reception callback handling PASS 0.100643000s
+ Error callback handling PASS 0.101196000s
Tests for Unix sockets:
- Send data (stream) PASS 0.100821000s
- Send data (datagram) PASS 0.101089000s
- Send data (various buffer ranges) PASS 0.000969000s
- Unix socket removal PASS 0.000038000s
- Unix path validation PASS 0.000002000s
+ Send data (stream) PASS 0.100744000s
+ Send data (datagram) PASS 0.100854000s
+ Send data (various buffer ranges) PASS 0.020971000s
+ Unix socket removal PASS 0.000054000s
+ Unix path validation PASS 0.000004000s
Tests for UDP processing:
- Create UDP header PASS 0.000004000s
- Validate UDP checksum PASS 0.000078000s
+ Create UDP header PASS 0.000006000s
+ Validate UDP checksum PASS 0.000079000s
Tests for IP processing:
- Create IP header PASS 0.000003000s
- Create IP packet PASS 0.000130000s
- Validate IP packet PASS 0.000216000s
+ Create IP header PASS 0.000005000s
+ Create IP packet PASS 0.000162000s
+ Validate IP packet PASS 0.000398000s
Tests for in-memory streams:
- Write/read record types PASS 0.000042000s
- Stream buffer too small PASS 0.000067000s
- Send records over socket PASS 0.000321000s
+ Write/read record types PASS 0.000065000s
+ Stream buffer too small PASS 0.000121000s
+ Send records over socket PASS 0.000432000s
Tests for network interfaces package:
- Get iface index for loopback PASS 0.000083000s
- Get iface hw addr for loopback PASS 0.000060000s
- Get iface IP addr for loopback PASS 0.000010000s
+ Get iface index for loopback PASS 0.000138000s
+ Get iface hw addr for loopback PASS 0.000114000s
+ Get iface IP addr for loopback PASS 0.000016000s
Skipped : 3
Anet tests:
Tests for Netlink sockets:
- Send data (raw) - Run as root SKIPPED 0.000399000s
+ Send data (raw) - Run as root SKIPPED 0.000683000s
Tests for Packet sockets:
- Send data (datagram) - Run as root SKIPPED 0.000288000s
- Send data (raw) - Run as root SKIPPED 0.000316000s
+ Send data (datagram) - Run as root SKIPPED 0.000552000s
+ Send data (raw) - Run as root SKIPPED 0.000528000s
make[2]: Leaving directory '/build/anet-0.3.1'
make[1]: Leaving directory '/build/anet-0.3.1'
@@ -447,7 +460,7 @@
dh_prep
debian/rules override_dh_auto_install
make[1]: Entering directory '/build/anet-0.3.1'
-/usr/bin/make NUM_CPUS=17 PREFIX=/build/anet-0.3.1/debian/tmp install
+/usr/bin/make NUM_CPUS=18 PREFIX=/build/anet-0.3.1/debian/tmp install
make[2]: Entering directory '/build/anet-0.3.1'
gnatmake: objects up to date.
install -d /build/anet-0.3.1/debian/tmp/lib/gnat
@@ -460,7 +473,7 @@
install lib/dynamic/libanet.so.0.3.1 /build/anet-0.3.1/debian/tmp/lib
cd /build/anet-0.3.1/debian/tmp/lib && ln -sf libanet.so.0.3.1 libanet.so
make[2]: Leaving directory '/build/anet-0.3.1'
-/usr/bin/make NUM_CPUS=17 LIBRARY_KIND=static PREFIX=/build/anet-0.3.1/debian/tmp install
+/usr/bin/make NUM_CPUS=18 LIBRARY_KIND=static PREFIX=/build/anet-0.3.1/debian/tmp install
make[2]: Entering directory '/build/anet-0.3.1'
gnatmake: objects up to date.
install -d /build/anet-0.3.1/debian/tmp/lib/gnat
@@ -498,28 +511,77 @@
dh_shlibdeps
dh_installdeb
dh_gencontrol
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
dh_md5sums
dh_builddeb
-dpkg-deb: building package 'libanet0.3.1' in '../libanet0.3.1_0.3.1-1_amd64.deb'.
-dpkg-deb: building package 'libanet0.3.1-dbg' in '../libanet0.3.1-dbg_0.3.1-1_amd64.deb'.
-dpkg-deb: building package 'libanet0.3.1-dev' in '../libanet0.3.1-dev_0.3.1-1_amd64.deb'.
+dpkg-deb : construction du paquet « libanet0.3.1 » dans « ../libanet0.3.1_0.3.1-1_amd64.deb ».
+dpkg-deb : construction du paquet « libanet0.3.1-dbg » dans « ../libanet0.3.1-dbg_0.3.1-1_amd64.deb ».
+dpkg-deb : construction du paquet « libanet0.3.1-dev » dans « ../libanet0.3.1-dev_0.3.1-1_amd64.deb ».
dpkg-genbuildinfo >../anet_0.3.1-1_amd64.buildinfo
dpkg-distaddfile anet_0.3.1-1_amd64.buildinfo libs optional
-dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-distaddfile: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
dpkg-genchanges -b >../anet_0.3.1-1_amd64.changes
-dpkg-genchanges: binary-only upload (no source code included)
+dpkg-genchanges: envoi des binaires seulement (le code source n'est pas inclus)
dpkg-source --after-build anet-0.3.1
-dpkg-source: info: using options from anet-0.3.1/debian/source/options: --compression=bzip2 --compression-level=7
-dpkg-buildpackage: binary-only upload (no source included)
+dpkg-source: info: utilisation des options depuis anet-0.3.1/debian/source/options : --compression=bzip2 --compression-level=7
+dpkg-buildpackage: envoi d'un binaire seulement (aucune inclusion de code source)
+I: user script /srv/workspace/pbuilder/10012/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/10012/tmp/hooks/B01_cleanup finished
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting /sys filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 164: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting /dev/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 164: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting dev/pts filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 164: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting run/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 164: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting proc filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 164: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/52109 and its subdirectories
-I: Current time: Tue Feb 13 00:52:30 GMT+12 2018
-I: pbuilder-time-stamp: 1518526350
+I: removing directory /srv/workspace/pbuilder/10012 and its subdirectories
+I: Current time: Thu Dec 10 14:07:35 GMT-14 2015
+I: pbuilder-time-stamp: 1449706055
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/logdiffs/testing/amd64/anet_0.3.1-1.diff: 83.2% -- replaced with /var/lib/jenkins/userContent/reproducible/logdiffs/testing/amd64/anet_0.3.1-1.diff.gz
b2/build.log: 85.3%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 85.5%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/logs/testing/amd64/anet_0.3.1-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/tmp.2IEdI1vrmw/tmp.8qYKcFQ5KG
+ mv /srv/reproducible-results/tmp.2IEdI1vrmw/tmp.8qYKcFQ5KG /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/anet_0.3.1-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/anet_0.3.1-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_changes_files
++ mktemp --tmpdir=/srv/reproducible-results/tmp.2IEdI1vrmw
+ local TMPLOG=/srv/reproducible-results/tmp.2IEdI1vrmw/tmp.CECehQlDjH
+ echo
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/anet_0.3.1-1.rbuild.log
+ local TIMEOUT=30m
+ DBDSUITE=testing
+ '[' testing = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/tmp.2IEdI1vrmw -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/tmp.2IEdI1vrmw/dbd-tmp-QYGfGaS
++ schroot --directory /srv/reproducible-results/tmp.2IEdI1vrmw -c source:jenkins-reproducible-testing-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 42'
++ echo diffoscope 42
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/anet_0.3.1-1.rbuild.log
++ date -u
+ echo 'Thu Dec 10 00:07:37 UTC 2015 - diffoscope 42 will be used to compare the two builds:'
Thu Dec 10 00:07:37 UTC 2015 - diffoscope 42 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 30m schroot --directory /srv/reproducible-results/tmp.2IEdI1vrmw -c source:jenkins-reproducible-testing-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/tmp.2IEdI1vrmw/dbd-tmp-QYGfGaS ; diffoscope --html /srv/reproducible-results/tmp.2IEdI1vrmw/anet_0.3.1-1.diffoscope.html --text /srv/reproducible-results/tmp.2IEdI1vrmw/anet_0.3.1-1.diffoscope.txt /srv/reproducible-results/tmp.2IEdI1vrmw/b1/anet_0.3.1-1_amd64.changes /srv/reproducible-results/tmp.2IEdI1vrmw/b2/anet_0.3.1-1_amd64.changes'
+ RESULT=1
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/tmp.2IEdI1vrmw/tmp.CECehQlDjH
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
Thu Dec 10 00:07:58 UTC 2015 - anet failed to build reproducibly in testing on amd64.
Error: database is locked
Error: database is locked
Error: database is locked
Error: database is locked
/var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/anet_0.3.1-1.rbuild.log: 81.2% -- replaced with /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/anet_0.3.1-1.rbuild.log.gz
INFO: Starting at 2015-12-10 00:12:00.700230
CRITICAL: Error executing this query:
CRITICAL: SELECT r.status, r.version, r.build_date FROM results AS r JOIN sources AS s ON r.package_id=s.id WHERE s.name="anet" AND s.architecture="amd64" AND s.suite="testing"
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "/srv/jenkins/bin/reproducible_common.py", line 717, in __init__
self._status[suite][arch] = Build(self.name, suite, arch)
File "/srv/jenkins/bin/reproducible_common.py", line 684, in __init__
self._get_package_status()
File "/srv/jenkins/bin/reproducible_common.py", line 693, in _get_package_status
result = query_db(query)[0]
File "/srv/jenkins/bin/reproducible_common.py", line 351, in query_db
cursor.execute(query)
sqlite3.OperationalError: database is locked
INFO: Finished at 2015-12-10 00:13:00.796565, took: 0:01:00.096353
Warning: cannot update html pages for anet
Thu 10 Dec 00:13:00 UTC 2015 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-hf0189i2, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list