[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_amd64_32 #21338

jenkins at jenkins.debian.net jenkins at jenkins.debian.net
Mon Feb 8 18:26:42 UTC 2016


See <https://jenkins.debian.net/job/reproducible_builder_amd64_32/21338/>

------------------------------------------
[...truncated 3145 lines...]
+make[2] : on quitte le répertoire « /build/tgt-1.0.63 »
+make[1] : on quitte le répertoire « /build/tgt-1.0.63 »
  fakeroot debian/rules binary
 dh binary --parallel --with systemd,bash-completion
    dh_testroot -O--parallel
    dh_prep -O--parallel
    debian/rules override_dh_auto_install
-make[1]: Entering directory '/build/tgt-1.0.63'
+make[1] : on entre dans le répertoire « /build/tgt-1.0.63 »
 /usr/bin/make ISCSI_RDMA=1 CEPH_RBD=1 GLFS_BD=1 SD_NOTIFY=1 DESTDIR=/build/tgt-1.0.63/debian/tgt install
-make[2]: Entering directory '/build/tgt-1.0.63'
+make[2] : on entre dans le répertoire « /build/tgt-1.0.63 »
 /usr/bin/make -C usr install
-make[3]: Entering directory '/build/tgt-1.0.63/usr'
+make[3] : on entre dans le répertoire « /build/tgt-1.0.63/usr »
 install -d -m 755 /build/tgt-1.0.63/debian/tgt/usr/sbin
 install -m 755 tgtd tgtadm tgtimg /build/tgt-1.0.63/debian/tgt/usr/sbin
 install -d -m 755 /build/tgt-1.0.63/debian/tgt/usr/lib/tgt/backing-store
 install -m 755 bs_rbd.so bs_glfs.so /build/tgt-1.0.63/debian/tgt/usr/lib/tgt/backing-store
-make[3]: Leaving directory '/build/tgt-1.0.63/usr'
+make[3] : on quitte le répertoire « /build/tgt-1.0.63/usr »
 /usr/bin/make -C doc install
-make[3]: Entering directory '/build/tgt-1.0.63/doc'
+make[3] : on entre dans le répertoire « /build/tgt-1.0.63/doc »
 install -d -m 755 /build/tgt-1.0.63/debian/tgt/usr/share/man/man8
 install -m 644 manpages/tgtadm.8 manpages/tgt-admin.8 manpages/tgtimg.8 manpages/tgt-setup-lun.8 manpages/tgtd.8 /build/tgt-1.0.63/debian/tgt/usr/share/man/man8
 install -d -m 755 /build/tgt-1.0.63/debian/tgt/usr/share/doc/tgt
 install -m 644 README.iscsi README.iser README.lu_configuration README.mmc tmf.txt README.rbd /build/tgt-1.0.63/debian/tgt/usr/share/doc/tgt
-make[3]: Leaving directory '/build/tgt-1.0.63/doc'
+make[3] : on quitte le répertoire « /build/tgt-1.0.63/doc »
 /usr/bin/make -C conf install
-make[3]: Entering directory '/build/tgt-1.0.63/conf'
+make[3] : on entre dans le répertoire « /build/tgt-1.0.63/conf »
 install -d -m 755 /build/tgt-1.0.63/debian/tgt/etc/tgt
 if [ ! -f /build/tgt-1.0.63/debian/tgt/etc/tgt/targets.conf ] ; then \
 	install -m 644 targets.conf /build/tgt-1.0.63/debian/tgt/etc/tgt ; \
@@ -735,28 +748,28 @@
 	install -m 644 examples/$f /build/tgt-1.0.63/debian/tgt/usr/share/doc/tgt/examples ;\
 done
 install -d /build/tgt-1.0.63/debian/tgt/etc/tgt/conf.d
-make[3]: Leaving directory '/build/tgt-1.0.63/conf'
+make[3] : on quitte le répertoire « /build/tgt-1.0.63/conf »
 /usr/bin/make -C scripts install
-make[3]: Entering directory '/build/tgt-1.0.63/scripts'
+make[3] : on entre dans le répertoire « /build/tgt-1.0.63/scripts »
 install -d -m 755 /build/tgt-1.0.63/debian/tgt/usr/sbin
 install -m 755 tgt-setup-lun tgt-admin /build/tgt-1.0.63/debian/tgt/usr/sbin
-make[3]: Leaving directory '/build/tgt-1.0.63/scripts'
-make[2]: Leaving directory '/build/tgt-1.0.63'
-make[1]: Leaving directory '/build/tgt-1.0.63'
+make[3] : on quitte le répertoire « /build/tgt-1.0.63/scripts »
+make[2] : on quitte le répertoire « /build/tgt-1.0.63 »
+make[1] : on quitte le répertoire « /build/tgt-1.0.63 »
    debian/rules override_dh_install
-make[1]: Entering directory '/build/tgt-1.0.63'
+make[1] : on entre dans le répertoire « /build/tgt-1.0.63 »
 dh_install
 rm -rf /build/tgt-1.0.63/debian/tgt/usr/lib
-make[1]: Leaving directory '/build/tgt-1.0.63'
+make[1] : on quitte le répertoire « /build/tgt-1.0.63 »
    dh_installdocs -O--parallel
    dh_installchangelogs -O--parallel
    dh_installman -O--parallel
    dh_bash-completion -O--parallel
    dh_systemd_enable -O--parallel
    debian/rules override_dh_installinit
-make[1]: Entering directory '/build/tgt-1.0.63'
+make[1] : on entre dans le répertoire « /build/tgt-1.0.63 »
 dh_installinit --no-restart-on-upgrade
-make[1]: Leaving directory '/build/tgt-1.0.63'
+make[1] : on quitte le répertoire « /build/tgt-1.0.63 »
    dh_systemd_start -O--parallel
    dh_perl -O--parallel
    dh_link -O--parallel
@@ -764,39 +777,89 @@
    dh_compress -O--parallel
    dh_fixperms -O--parallel
    debian/rules override_dh_strip
-make[1]: Entering directory '/build/tgt-1.0.63'
+make[1] : on entre dans le répertoire « /build/tgt-1.0.63 »
 dh_strip --dbg-package=tgt-dbg
-make[1]: Leaving directory '/build/tgt-1.0.63'
+make[1] : on quitte le répertoire « /build/tgt-1.0.63 »
    dh_makeshlibs -O--parallel
    dh_shlibdeps -O--parallel
    dh_installdeb -O--parallel
    dh_gencontrol -O--parallel
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-dpkg-gencontrol: warning: package tgt: unused substitution variable ${perl:Depends}
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-dpkg-gencontrol: warning: Depends field of package tgt-dbg: unknown substitution variable ${shlibs:Depends}
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+dpkg-gencontrol: avertissement: paquet tgt : variable de substitution inutilisée ${perl:Depends}
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+dpkg-gencontrol: avertissement: champ Depends du paquet tgt-dbg : variable de substitution inconnue ${shlibs:Depends}
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
    dh_md5sums -O--parallel
    dh_builddeb -O--parallel
-dpkg-deb: building package 'tgt-rbd' in '../tgt-rbd_1.0.63-1_amd64.deb'.
-dpkg-deb: building package 'tgt-glusterfs' in '../tgt-glusterfs_1.0.63-1_amd64.deb'.
-dpkg-deb: building package 'tgt' in '../tgt_1.0.63-1_amd64.deb'.
-dpkg-deb: building package 'tgt-dbg' in '../tgt-dbg_1.0.63-1_amd64.deb'.
+dpkg-deb : construction du paquet « tgt-rbd » dans « ../tgt-rbd_1.0.63-1_amd64.deb ».
+dpkg-deb : construction du paquet « tgt-glusterfs » dans « ../tgt-glusterfs_1.0.63-1_amd64.deb ».
+dpkg-deb : construction du paquet « tgt-dbg » dans « ../tgt-dbg_1.0.63-1_amd64.deb ».
+dpkg-deb : construction du paquet « tgt » dans « ../tgt_1.0.63-1_amd64.deb ».
  dpkg-genbuildinfo  >../tgt_1.0.63-1_amd64.buildinfo
  dpkg-distaddfile tgt_1.0.63-1_amd64.buildinfo net optional
-dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-distaddfile: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
  dpkg-genchanges -b >../tgt_1.0.63-1_amd64.changes
-dpkg-genchanges: binary-only upload (no source code included)
+dpkg-genchanges: envoi des binaires seulement (le code source n'est pas inclus)
  dpkg-source --after-build tgt-1.0.63
-dpkg-buildpackage: binary-only upload (no source included)
+dpkg-buildpackage: envoi d'un binaire seulement (aucune inclusion de code source)
 I: copying local configuration
+I: user script /srv/workspace/pbuilder/54023/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/54023/tmp/hooks/B01_cleanup finished
+W: no hooks of type I found -- ignoring
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+	LANGUAGE = (unset),
+	LC_ALL = "fr_CH.UTF-8",
+	LANG = "fr_CH.UTF-8"
+    are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+	LANGUAGE = (unset),
+	LC_ALL = "fr_CH.UTF-8",
+	LANG = "fr_CH.UTF-8"
+    are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
 I: unmounting /sys filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+	LANGUAGE = (unset),
+	LC_ALL = "fr_CH.UTF-8",
+	LANG = "fr_CH.UTF-8"
+    are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
 I: unmounting /dev/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+	LANGUAGE = (unset),
+	LC_ALL = "fr_CH.UTF-8",
+	LANG = "fr_CH.UTF-8"
+    are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
 I: unmounting dev/pts filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+	LANGUAGE = (unset),
+	LC_ALL = "fr_CH.UTF-8",
+	LANG = "fr_CH.UTF-8"
+    are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
 I: unmounting run/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+	LANGUAGE = (unset),
+	LC_ALL = "fr_CH.UTF-8",
+	LANG = "fr_CH.UTF-8"
+    are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
 I: unmounting proc filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
 I: cleaning the build env 
-I: removing directory /srv/workspace/pbuilder/39908 and its subdirectories
-I: Current time: Sun Mar 12 12:45:25 GMT+12 2017
-I: pbuilder-time-stamp: 1489365925
+I: removing directory /srv/workspace/pbuilder/54023 and its subdirectories
+I: Current time: Tue Feb  9 08:25:00 GMT-14 2016
+I: pbuilder-time-stamp: 1454955900

Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/logdiffs/unstable/amd64/tgt_1.0.63-1.diff:	 85.4% -- replaced with /var/lib/jenkins/userContent/reproducible/logdiffs/unstable/amd64/tgt_1.0.63-1.diff.gz
b2/build.log:	 86.0%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log:	 85.8%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/logs/unstable/amd64/tgt_1.0.63-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-e9CTUJUV/tmp.gHwt7CuIfP
+ mv /srv/reproducible-results/rbuild-debian-e9CTUJUV/tmp.gHwt7CuIfP /var/lib/jenkins/userContent/reproducible/rbuild/unstable/amd64/tgt_1.0.63-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/rbuild/unstable/amd64/tgt_1.0.63-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-e9CTUJUV
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-e9CTUJUV/tmp.9Zi4hdLP3Z
+ echo
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/unstable/amd64/tgt_1.0.63-1.rbuild.log

+ local TIMEOUT=120m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-e9CTUJUV -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-e9CTUJUV/dbd-tmp-L7yffts
++ schroot --directory /srv/reproducible-results/rbuild-debian-e9CTUJUV -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 48'
++ echo diffoscope 48
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/unstable/amd64/tgt_1.0.63-1.rbuild.log
++ date -u
+ echo 'Mon Feb  8 18:24:25 UTC 2016 - diffoscope 48 will be used to compare the two builds:'
Mon Feb  8 18:24:25 UTC 2016 - diffoscope 48 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-e9CTUJUV -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-e9CTUJUV/dbd-tmp-L7yffts ; diffoscope 			--html /srv/reproducible-results/rbuild-debian-e9CTUJUV/tgt_1.0.63-1.diffoscope.html 			--text /srv/reproducible-results/rbuild-debian-e9CTUJUV/tgt_1.0.63-1.diffoscope.txt 			/srv/reproducible-results/rbuild-debian-e9CTUJUV/b1/tgt_1.0.63-1_amd64.buildinfo 			/srv/reproducible-results/rbuild-debian-e9CTUJUV/b2/tgt_1.0.63-1_amd64.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-e9CTUJUV/tmp.9Zi4hdLP3Z
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x

 _        _   
| |_ __ _| |_ 
| __/ _` | __|
| || (_| | |_ 
 \__\__, |\__|
    |___/     

diffoscope 48 found no differences in the changes files, and a .buildinfo file also exists.
tgt from unstable built successfully and reproducibly on amd64.
Error: database is locked
Error: database is locked
/var/lib/jenkins/userContent/reproducible/rbuild/unstable/amd64/tgt_1.0.63-1.rbuild.log:	 82.7% -- replaced with /var/lib/jenkins/userContent/reproducible/rbuild/unstable/amd64/tgt_1.0.63-1.rbuild.log.gz
INFO: Starting at 2016-02-08 18:26:37.622085
CRITICAL: buildinfo not detected at /var/lib/jenkins/userContent/reproducible/buildinfo/unstable/amd64/tgt_1.0.62-2_amd64.buildinfo
CRITICAL: https://tests.reproducible-builds.org/unstable/amd64/tgt didn't produce a buildlog, even though it has been built.
INFO: Finished at 2016-02-08 18:26:42.371974, took: 0:00:04.749902
Mon  8 Feb 18:26:42 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-J0meXSMz, which will now be removed.
Build step 'Execute shell' marked build as failure



More information about the Qa-jenkins-scm mailing list