[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_i386_3 #15052
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Thu Sep 15 07:36:23 UTC 2016
See <https://jenkins.debian.net/job/reproducible_builder_i386_3/15052/>
------------------------------------------
[...truncated 1903 lines...]
-Setting up libtool (2.4.6-2) ...
-Setting up gettext (0.19.8.1-1) ...
-Setting up intltool-debian (0.35.0+20060710.4) ...
-Setting up po-debconf (1.0.19) ...
-Setting up dh-autoreconf (12) ...
-Setting up debhelper (10) ...
-Setting up dh-strip-nondeterminism (0.028-1) ...
-Processing triggers for libc-bin (2.24-2) ...
-Reading package lists...
-Building dependency tree...
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+libtool (2.4.6-2) wird eingerichtet ...
+gettext (0.19.8.1-1) wird eingerichtet ...
+intltool-debian (0.35.0+20060710.4) wird eingerichtet ...
+po-debconf (1.0.19) wird eingerichtet ...
+dh-autoreconf (12) wird eingerichtet ...
+debhelper (10) wird eingerichtet ...
+dh-strip-nondeterminism (0.028-1) wird eingerichtet ...
+Trigger für libc-bin (2.24-2) werden verarbeitet ...
+Paketlisten werden gelesen...
+Abhängigkeitsbaum wird aufgebaut....
+Statusinformationen werden eingelesen....
+Lesen der erweiterten Statusinformationen...
+Initialisieren des Paketstatus'...
+Schreiben der erweiterten Statusinformationen...
+Erzeugen der Tag-Datenbank...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Paketlisten werden gelesen...
+Abhängigkeitsbaum wird aufgebaut....
+Statusinformationen werden eingelesen....
fakeroot is already the newest version (1.21-2).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
I: Copying source file
I: copying [libpkgconfig-perl_0.12026-1.dsc]
I: copying [./libpkgconfig-perl_0.12026.orig.tar.gz]
I: copying [./libpkgconfig-perl_0.12026-1.debian.tar.xz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
-gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error
-gpgv: Signature made Thu May 12 10:36:02 2016 GMT+12
+gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': Allgemeiner Fehler
+gpgv: Signature made Fre 13 Mai 2016 12:36:02 GMT-14
gpgv: using RSA key BB3A68018649AA06
-gpgv: Can't check signature: No public key
+gpgv: Can't check signature: Kein öffentlicher Schlüssel
dpkg-source: warning: failed to verify signature on ./libpkgconfig-perl_0.12026-1.dsc
dpkg-source: info: extracting libpkgconfig-perl in libpkgconfig-perl-0.12026
dpkg-source: info: unpacking libpkgconfig-perl_0.12026.orig.tar.gz
dpkg-source: info: unpacking libpkgconfig-perl_0.12026-1.debian.tar.xz
dpkg-source: info: applying 0001-Adjust-path-to-ppkg-config-in-test-scripts.patch
I: Building the package
-I: Running cd /build-1st/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-identifier=i386 -rfakeroot
+W: no hooks of type A found -- ignoring
+I: Running cd /build-2nd/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-identifier=i386 -rfakeroot
dpkg-buildpackage: info: source package libpkgconfig-perl
dpkg-buildpackage: info: source version 0.12026-1
dpkg-buildpackage: info: source distribution unstable
@@ -259,27 +272,27 @@
dh_testdir
dh_update_autotools_config
debian/rules override_dh_auto_configure
-make[1]: Entering directory '/build-1st/libpkgconfig-perl-0.12026'
+make[1]: Verzeichnis „/build-2nd/libpkgconfig-perl-0.12026“ wird betreten
dh_auto_configure -- --script=ppkg-config
- perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build-1st/libpkgconfig-perl-0.12026=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build-1st/libpkgconfig-perl-0.12026=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" --script=ppkg-config
+ perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build-2nd/libpkgconfig-perl-0.12026=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build-2nd/libpkgconfig-perl-0.12026=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" --script=ppkg-config
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for PkgConfig
Writing MYMETA.yml and MYMETA.json
-make[1]: Leaving directory '/build-1st/libpkgconfig-perl-0.12026'
+make[1]: Verzeichnis „/build-2nd/libpkgconfig-perl-0.12026“ wird verlassen
dh_auto_build
make -j1
-make[1]: Entering directory '/build-1st/libpkgconfig-perl-0.12026'
+make[1]: Verzeichnis „/build-2nd/libpkgconfig-perl-0.12026“ wird betreten
cp lib/PkgConfig.pm blib/lib/PkgConfig.pm
cp script/ppkg-config blib/script/ppkg-config
"/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/ppkg-config
Manifying 1 pod document
Manifying 1 pod document
-make[1]: Leaving directory '/build-1st/libpkgconfig-perl-0.12026'
+make[1]: Verzeichnis „/build-2nd/libpkgconfig-perl-0.12026“ wird verlassen
dh_auto_test
make -j1 test TEST_VERBOSE=1
-make[1]: Entering directory '/build-1st/libpkgconfig-perl-0.12026'
+make[1]: Verzeichnis „/build-2nd/libpkgconfig-perl-0.12026“ wird betreten
"/usr/bin/perl" run_test.pl
Testing PkgConfig 0.12026, Perl 5.022002, /usr/bin/perl
@@ -289,17 +302,17 @@
t/02-iterfiles-FLISTaa.t .. ok
t/02-iterfiles-FLISTad.t .. ok
t/02-iterfiles-FLISTaf.t .. ok
-t/02-iterfiles-FLISTah.t .. ok
-t/02-iterfiles-FLISTae.t .. ok
-t/dep_no_inherit_vars.t ... ok
t/02-iterfiles-FLISTab.t .. ok
+t/02-iterfiles-FLISTae.t .. ok
+t/02-iterfiles-FLISTah.t .. ok
t/env.t ................... ok
+t/dep_no_inherit_vars.t ... ok
t/file_path.t ............. ok
+t/pcfiledir.t ............. ok
t/perl_version.t .......... skipped: test requires Test::MinimumVersion
t/02-iterfiles-FLISTac.t .. ok
-t/pcfiledir.t ............. ok
-t/02-iterfiles-FLISTal.t .. ok
t/quote.t ................. ok
+t/02-iterfiles-FLISTal.t .. ok
t/strawberry.t ............ skipped: Test only for MSWin32
t/version_class.t ......... ok
t/02-iterfiles-FLISTag.t .. ok
@@ -307,23 +320,23 @@
t/02-iterfiles-FLISTai.t .. ok
t/02-iterfiles-FLISTak.t .. ok
All tests successful.
-Files=22, Tests=1575, 33 wallclock secs ( 0.61 usr 0.06 sys + 167.23 cusr 12.57 csys = 180.47 CPU)
+Files=22, Tests=1575, 29 wallclock secs ( 0.58 usr 0.10 sys + 143.52 cusr 11.08 csys = 155.28 CPU)
Result: PASS
-make[1]: Leaving directory '/build-1st/libpkgconfig-perl-0.12026'
+make[1]: Verzeichnis „/build-2nd/libpkgconfig-perl-0.12026“ wird verlassen
fakeroot debian/rules binary
dh binary
dh_testroot
dh_prep
dh_auto_install
- make -j1 install DESTDIR=/build-1st/libpkgconfig-perl-0.12026/debian/libpkgconfig-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
-make[1]: Entering directory '/build-1st/libpkgconfig-perl-0.12026'
+ make -j1 install DESTDIR=/build-2nd/libpkgconfig-perl-0.12026/debian/libpkgconfig-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
+make[1]: Verzeichnis „/build-2nd/libpkgconfig-perl-0.12026“ wird betreten
Manifying 1 pod document
Manifying 1 pod document
-Installing /build-1st/libpkgconfig-perl-0.12026/debian/libpkgconfig-perl/usr/share/perl5/PkgConfig.pm
-Installing /build-1st/libpkgconfig-perl-0.12026/debian/libpkgconfig-perl/usr/share/man/man1/ppkg-config.1p
-Installing /build-1st/libpkgconfig-perl-0.12026/debian/libpkgconfig-perl/usr/share/man/man3/PkgConfig.3pm
-Installing /build-1st/libpkgconfig-perl-0.12026/debian/libpkgconfig-perl/usr/bin/ppkg-config
-make[1]: Leaving directory '/build-1st/libpkgconfig-perl-0.12026'
+Installing /build-2nd/libpkgconfig-perl-0.12026/debian/libpkgconfig-perl/usr/share/perl5/PkgConfig.pm
+Installing /build-2nd/libpkgconfig-perl-0.12026/debian/libpkgconfig-perl/usr/share/man/man1/ppkg-config.1p
+Installing /build-2nd/libpkgconfig-perl-0.12026/debian/libpkgconfig-perl/usr/share/man/man3/PkgConfig.3pm
+Installing /build-2nd/libpkgconfig-perl-0.12026/debian/libpkgconfig-perl/usr/bin/ppkg-config
+make[1]: Verzeichnis „/build-2nd/libpkgconfig-perl-0.12026“ wird verlassen
dh_installdocs
dh_installchangelogs
dh_installman
@@ -338,7 +351,7 @@
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dh_md5sums
dh_builddeb
-dpkg-deb: building package 'libpkgconfig-perl' in '../libpkgconfig-perl_0.12026-1_all.deb'.
+dpkg-deb: Paket »libpkgconfig-perl« wird in »../libpkgconfig-perl_0.12026-1_all.deb« gebaut.
dpkg-distaddfile libpkgconfig-perl_0.12026-1_i386.buildinfo perl optional
dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-genchanges --build=any,all >../libpkgconfig-perl_0.12026-1_i386.changes
@@ -346,12 +359,15 @@
dpkg-source --after-build libpkgconfig-perl-0.12026
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/42102/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/42102/tmp/hooks/B01_cleanup finished
+W: no hooks of type I found -- ignoring
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/27708 and its subdirectories
-I: Current time: Wed Sep 14 19:29:47 GMT+12 2016
-I: pbuilder-time-stamp: 1473924587
+I: removing directory /srv/workspace/pbuilder/42102 and its subdirectories
+I: Current time: Don Okt 19 03:54:13 GMT-14 2017
+I: pbuilder-time-stamp: 1508334853
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/libpkgconfig-perl_0.12026-1.diff: 80.3% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/libpkgconfig-perl_0.12026-1.diff.gz
b2/build.log: 75.9%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 75.6%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/i386/libpkgconfig-perl_0.12026-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-uJCQyZZs/tmp.BMedueWkj0
+ mv /srv/reproducible-results/rbuild-debian-uJCQyZZs/tmp.BMedueWkj0 /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libpkgconfig-perl_0.12026-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libpkgconfig-perl_0.12026-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-uJCQyZZs
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-uJCQyZZs/tmp.lnZcZvW3CO
+ local TIMEOUT=120m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-uJCQyZZs -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-uJCQyZZs/dbd-tmp-Lzu8lyM
++ schroot --directory /srv/reproducible-results/rbuild-debian-uJCQyZZs -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 60'
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ echo diffoscope 60
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 60 will be used to compare the two builds:'
+ _log I: 'diffoscope 60 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
++ date -u
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libpkgconfig-perl_0.12026-1.rbuild.log
+ echo -e 'Thu Sep 15 07:31:16 UTC 2016 I: diffoscope 60 will be used to compare the two builds:'
Thu Sep 15 07:31:16 UTC 2016 I: diffoscope 60 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-uJCQyZZs -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-uJCQyZZs/dbd-tmp-Lzu8lyM ; diffoscope --html /srv/reproducible-results/rbuild-debian-uJCQyZZs/libpkgconfig-perl_0.12026-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian-uJCQyZZs/libpkgconfig-perl_0.12026-1.diffoscope.txt /srv/reproducible-results/rbuild-debian-uJCQyZZs/b1/libpkgconfig-perl_0.12026-1_i386.buildinfo /srv/reproducible-results/rbuild-debian-uJCQyZZs/b2/libpkgconfig-perl_0.12026-1_i386.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-uJCQyZZs/tmp.lnZcZvW3CO
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _ _ __ _ _
| (_) |__ _ __ | | ____ _ ___ ___ _ __ / _(_) __ _ _ __ ___ _ __| |
| | | '_ \| '_ \| |/ / _` |/ __/ _ \| '_ \| |_| |/ _` |_____| '_ \ / _ \ '__| |
| | | |_) | |_) | < (_| | (_| (_) | | | | _| | (_| |_____| |_) | __/ | | |
|_|_|_.__/| .__/|_|\_\__, |\___\___/|_| |_|_| |_|\__, | | .__/ \___|_| |_|
|_| |___/ |___/ |_|
Thu Sep 15 07:31:17 UTC 2016 I: diffoscope 60 found no differences in the changes files, and a .buildinfo file also exists.
Thu Sep 15 07:31:17 UTC 2016 I: libpkgconfig-perl from unstable built successfully and reproducibly on i386.
Error: database is locked
Error: database is locked
Error: database is locked
Error: database is locked
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libpkgconfig-perl_0.12026-1.rbuild.log: 71.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libpkgconfig-perl_0.12026-1.rbuild.log.gz
INFO: Starting at 2016-09-15 07:35:18.213868
INFO: Finished at 2016-09-15 07:36:23.547641, took: 0:01:05.333791
Thu 15 Sep 07:36:23 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-WD4Y1MGV, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list