[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_i386_12 #19446
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sat Oct 15 00:18:21 UTC 2016
https://jenkins.debian.net/job/reproducible_builder_i386_12/19446/------------------------------------------
[...truncated 2254 lines...]
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+libtool (2.4.6-2) wird eingerichtet ...
+gettext (0.19.8.1-1) wird eingerichtet ...
+intltool-debian (0.35.0+20060710.4) wird eingerichtet ...
+quilt (0.63-5) wird eingerichtet ...
+po-debconf (1.0.20) wird eingerichtet ...
+dh-autoreconf (12) wird eingerichtet ...
+debhelper (10.2.2) wird eingerichtet ...
+dh-strip-nondeterminism (0.028-1) wird eingerichtet ...
+Trigger für libc-bin (2.24-3) werden verarbeitet ...
+Paketlisten werden gelesen...
+Abhängigkeitsbaum wird aufgebaut....
+Statusinformationen werden eingelesen....
+Lesen der erweiterten Statusinformationen...
+Initialisieren des Paketstatus'...
+Schreiben der erweiterten Statusinformationen...
+Erzeugen der Tag-Datenbank...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Paketlisten werden gelesen...
+Abhängigkeitsbaum wird aufgebaut....
+Statusinformationen werden eingelesen....
fakeroot is already the newest version (1.21-2).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
I: Copying source file
I: copying [libmath-calc-units-perl_1.07-1.dsc]
I: copying [./libmath-calc-units-perl_1.07.orig.tar.gz]
I: copying [./libmath-calc-units-perl_1.07-1.diff.gz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
-gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error
-gpgv: Signature made Fri Aug 14 08:05:25 2009 -12
+gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': Allgemeiner Fehler
+gpgv: Signature made Sam 15 Aug 2009 10:05:25 +14
gpgv: using DSA key 3B32989D00F3CFE4
-gpgv: Can't check signature: No public key
+gpgv: Can't check signature: Kein öffentlicher Schlüssel
dpkg-source: warning: failed to verify signature on ./libmath-calc-units-perl_1.07-1.dsc
dpkg-source: info: extracting libmath-calc-units-perl in libmath-calc-units-perl-1.07
dpkg-source: info: unpacking libmath-calc-units-perl_1.07.orig.tar.gz
dpkg-source: info: applying libmath-calc-units-perl_1.07-1.diff.gz
I: Building the package
-I: Running cd /build/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-id=i386 -rfakeroot
+I: Running cd /build/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-id=i386 -rfakeroot
dpkg-buildpackage: info: source package libmath-calc-units-perl
dpkg-buildpackage: info: source version 1.07-1
dpkg-buildpackage: info: source distribution unstable
@@ -274,7 +285,7 @@
dh_auto_clean
dh_auto_clean: Compatibility levels before 9 are deprecated (level 7 in use)
dh_quilt_unpatch
-No patch removed
+Kein Patch entfernt
dh_clean
dh_clean: Compatibility levels before 9 are deprecated (level 7 in use)
debian/rules build
@@ -283,10 +294,10 @@
dh_testdir
dh_update_autotools_config
dh_quilt_patch
-Applying patch dont-install-ucalc
+Wende Patch dont-install-ucalc an
patching file Makefile.PL
-Now at patch dont-install-ucalc
+Jetzt in Patch dont-install-ucalc
dh_auto_configure
dh_auto_configure: Compatibility levels before 9 are deprecated (level 7 in use)
perl -I. Makefile.PL INSTALLDIRS=vendor create_packlist=0
@@ -299,28 +310,28 @@
dh_auto_build
dh_auto_build: Compatibility levels before 9 are deprecated (level 7 in use)
make -j1
-make[1]: Entering directory '/build/libmath-calc-units-perl-1.07'
+make[1]: Verzeichnis „/build/libmath-calc-units-perl-1.07“ wird betreten
cp Units/Grammar.pm blib/lib/Math/Calc/Units/Grammar.pm
+cp Units/Convert/Date.pm blib/lib/Math/Calc/Units/Convert/Date.pm
+cp Units/Convert/Combo.pm blib/lib/Math/Calc/Units/Convert/Combo.pm
cp Units/Convert/Byte.pm blib/lib/Math/Calc/Units/Convert/Byte.pm
-cp Units/Convert/Base.pm blib/lib/Math/Calc/Units/Convert/Base.pm
-cp Units/Compute.pm blib/lib/Math/Calc/Units/Compute.pm
-cp Units/Convert.pm blib/lib/Math/Calc/Units/Convert.pm
cp Units.pm blib/lib/Math/Calc/Units.pm
-cp Units/Convert/Time.pm blib/lib/Math/Calc/Units/Convert/Time.pm
-cp Units/Convert/Metric.pm blib/lib/Math/Calc/Units/Convert/Metric.pm
-cp Units/Convert/Multi.pm blib/lib/Math/Calc/Units/Convert/Multi.pm
-cp Units/Convert/Base2Metric.pm blib/lib/Math/Calc/Units/Convert/Base2Metric.pm
-cp Units/Convert/Date.pm blib/lib/Math/Calc/Units/Convert/Date.pm
+cp Units/Convert/Base.pm blib/lib/Math/Calc/Units/Convert/Base.pm
cp Units/Convert/Distance.pm blib/lib/Math/Calc/Units/Convert/Distance.pm
cp Units/Grammar.y blib/lib/Math/Calc/Units/Grammar.y
+cp Units/Convert/Multi.pm blib/lib/Math/Calc/Units/Convert/Multi.pm
+cp Units/Convert/Metric.pm blib/lib/Math/Calc/Units/Convert/Metric.pm
+cp Units/Convert/Time.pm blib/lib/Math/Calc/Units/Convert/Time.pm
+cp Units/Convert/Base2Metric.pm blib/lib/Math/Calc/Units/Convert/Base2Metric.pm
+cp Units/Compute.pm blib/lib/Math/Calc/Units/Compute.pm
cp Units/Rank.pm blib/lib/Math/Calc/Units/Rank.pm
-cp Units/Convert/Combo.pm blib/lib/Math/Calc/Units/Convert/Combo.pm
+cp Units/Convert.pm blib/lib/Math/Calc/Units/Convert.pm
Manifying 1 pod document
-make[1]: Leaving directory '/build/libmath-calc-units-perl-1.07'
+make[1]: Verzeichnis „/build/libmath-calc-units-perl-1.07“ wird verlassen
dh_auto_test
dh_auto_test: Compatibility levels before 9 are deprecated (level 7 in use)
make -j1 test TEST_VERBOSE=1
-make[1]: Entering directory '/build/libmath-calc-units-perl-1.07'
+make[1]: Verzeichnis „/build/libmath-calc-units-perl-1.07“ wird betreten
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/main.t ..
1..64
@@ -392,24 +403,24 @@
t/pod.t ...
1..14
ok 1 - POD test for blib/lib/Math/Calc/Units.pm
-ok 2 - POD test for blib/lib/Math/Calc/Units/Grammar.pm (no pod)
-ok 3 - POD test for blib/lib/Math/Calc/Units/Compute.pm (no pod)
+ok 2 - POD test for blib/lib/Math/Calc/Units/Compute.pm (no pod)
+ok 3 - POD test for blib/lib/Math/Calc/Units/Grammar.pm (no pod)
ok 4 - POD test for blib/lib/Math/Calc/Units/Rank.pm (no pod)
ok 5 - POD test for blib/lib/Math/Calc/Units/Convert.pm (no pod)
-ok 6 - POD test for blib/lib/Math/Calc/Units/Convert/Base.pm (no pod)
-ok 7 - POD test for blib/lib/Math/Calc/Units/Convert/Distance.pm (no pod)
+ok 6 - POD test for blib/lib/Math/Calc/Units/Convert/Time.pm (no pod)
+ok 7 - POD test for blib/lib/Math/Calc/Units/Convert/Base.pm (no pod)
ok 8 - POD test for blib/lib/Math/Calc/Units/Convert/Multi.pm (no pod)
-ok 9 - POD test for blib/lib/Math/Calc/Units/Convert/Base2Metric.pm (no pod)
-ok 10 - POD test for blib/lib/Math/Calc/Units/Convert/Metric.pm (no pod)
+ok 9 - POD test for blib/lib/Math/Calc/Units/Convert/Distance.pm (no pod)
+ok 10 - POD test for blib/lib/Math/Calc/Units/Convert/Date.pm (no pod)
ok 11 - POD test for blib/lib/Math/Calc/Units/Convert/Combo.pm (no pod)
-ok 12 - POD test for blib/lib/Math/Calc/Units/Convert/Byte.pm (no pod)
-ok 13 - POD test for blib/lib/Math/Calc/Units/Convert/Date.pm (no pod)
-ok 14 - POD test for blib/lib/Math/Calc/Units/Convert/Time.pm (no pod)
+ok 12 - POD test for blib/lib/Math/Calc/Units/Convert/Base2Metric.pm (no pod)
+ok 13 - POD test for blib/lib/Math/Calc/Units/Convert/Byte.pm (no pod)
+ok 14 - POD test for blib/lib/Math/Calc/Units/Convert/Metric.pm (no pod)
ok
All tests successful.
-Files=2, Tests=78, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.10 cusr 0.00 csys = 0.14 CPU)
+Files=2, Tests=78, 0 wallclock secs ( 0.05 usr 0.01 sys + 0.26 cusr 0.01 csys = 0.33 CPU)
Result: PASS
-make[1]: Leaving directory '/build/libmath-calc-units-perl-1.07'
+make[1]: Verzeichnis „/build/libmath-calc-units-perl-1.07“ wird verlassen
fakeroot debian/rules binary
dh --with quilt binary
dh: Compatibility levels before 9 are deprecated (level 7 in use)
@@ -418,25 +429,25 @@
dh_auto_install
dh_auto_install: Compatibility levels before 9 are deprecated (level 7 in use)
make -j1 install DESTDIR=/build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
-make[1]: Entering directory '/build/libmath-calc-units-perl-1.07'
+make[1]: Verzeichnis „/build/libmath-calc-units-perl-1.07“ wird betreten
Manifying 1 pod document
Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units.pm
-Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Grammar.pm
Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Compute.pm
+Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Grammar.y
+Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Grammar.pm
Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Rank.pm
Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert.pm
-Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Grammar.y
+Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert/Time.pm
Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert/Base.pm
-Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert/Distance.pm
Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert/Multi.pm
-Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert/Base2Metric.pm
-Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert/Metric.pm
+Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert/Distance.pm
+Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert/Date.pm
Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert/Combo.pm
+Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert/Base2Metric.pm
Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert/Byte.pm
-Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert/Date.pm
-Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert/Time.pm
+Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/perl5/Math/Calc/Units/Convert/Metric.pm
Installing /build/libmath-calc-units-perl-1.07/debian/libmath-calc-units-perl/usr/share/man/man3/Math::Calc::Units.3pm
-make[1]: Leaving directory '/build/libmath-calc-units-perl-1.07'
+make[1]: Verzeichnis „/build/libmath-calc-units-perl-1.07“ wird verlassen
dh_installdocs
dh_installchangelogs
dh_installchangelogs: Compatibility levels before 9 are deprecated (level 7 in use)
@@ -454,7 +465,7 @@
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dh_md5sums
dh_builddeb
-dpkg-deb: building package 'libmath-calc-units-perl' in '../libmath-calc-units-perl_1.07-1_all.deb'.
+dpkg-deb: Paket »libmath-calc-units-perl« wird in »../libmath-calc-units-perl_1.07-1_all.deb« gebaut.
dpkg-genbuildinfo --build=any,all --buildinfo-id=i386
dpkg-genbuildinfo: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-genchanges --build=any,all >../libmath-calc-units-perl_1.07-1_i386.changes
@@ -462,12 +473,14 @@
dpkg-source --after-build libmath-calc-units-perl-1.07
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/32119/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/32119/tmp/hooks/B01_cleanup finished
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/6737 and its subdirectories
-I: Current time: Thu Nov 16 18:38:49 GMT+12 2017
-I: pbuilder-time-stamp: 1510900729
+I: removing directory /srv/workspace/pbuilder/32119 and its subdirectories
+I: Current time: Sam Okt 15 14:18:19 GMT-14 2016
+I: pbuilder-time-stamp: 1476490699
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/testing/i386/libmath-calc-units-perl_1.07-1.diff: 82.2% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/testing/i386/libmath-calc-units-perl_1.07-1.diff.gz
b2/build.log: 77.5%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 77.5%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/testing/i386/libmath-calc-units-perl_1.07-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-siy43PW2/tmp.d3oSX20GB9
+ mv /srv/reproducible-results/rbuild-debian-siy43PW2/tmp.d3oSX20GB9 /var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libmath-calc-units-perl_1.07-1.rbuild.log
mv: error writing ‘/var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libmath-calc-units-perl_1.07-1.rbuild.log’: No space left on device
mv: failed to extend ‘/var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libmath-calc-units-perl_1.07-1.rbuild.log’: No space left on device
+ cleanup_all
+ '[' 0 = 1 ']'
+ '[' '!' -z '' ']'
+ '[' '!' -f /srv/reproducible-results/rbuild-debian-siy43PW2/tmp.d3oSX20GB9 ']'
+ gzip -9fvn /srv/reproducible-results/rbuild-debian-siy43PW2/tmp.d3oSX20GB9
/srv/reproducible-results/rbuild-debian-siy43PW2/tmp.d3oSX20GB9: 75.1% -- replaced with /srv/reproducible-results/rbuild-debian-siy43PW2/tmp.d3oSX20GB9.gz
+ '[' master = master ']'
+ gen_package_html libmath-calc-units-perl
+ cd /srv/jenkins/bin
+ python3 -c 'import reproducible_html_packages as rep
pkg = rep.Package('\''libmath-calc-units-perl'\'', no_notes=True)
rep.gen_packages_html([pkg], no_clean=True)'
INFO: Starting at 2016-10-15 00:18:21.375618
CRITICAL: buildinfo not detected at /var/lib/jenkins/userContent/reproducible/debian/buildinfo/testing/i386/libmath-calc-units-perl_1.07-1_i386.buildinfo
INFO: Finished at 2016-10-15 00:18:21.474947, took: 0:00:00.099340
+ cd -
+ cd
+ rm -r /srv/reproducible-results/rbuild-debian-siy43PW2
Sat 15 Oct 00:18:21 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-4K41GfT0, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list