[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_4 #14733
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Mon Nov 7 16:05:03 UTC 2016
https://jenkins.debian.net/job/reproducible_builder_armhf_4/14733/------------------------------------------
[...truncated 1030 lines...]
-Building tag database...
-pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
-pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
-The following NEW packages will be installed:
+Configurazione di pbuilder-satisfydepends-dummy (0.invalid.0)...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
+Inizializzazione dello stato dei pacchetti...
+Scrittura delle informazioni sullo stato esteso...
+Costruzione del database delle etichette...
+pbuilder-satisfydepends-dummy è già installato e si trova alla versione richiesta (0.invalid.0)
+pbuilder-satisfydepends-dummy è già installato e si trova alla versione richiesta (0.invalid.0)
+I seguenti pacchetti NUOVI (NEW) saranno installati:
libbz2-dev{a} zlib1g-dev{a}
-The following packages are RECOMMENDED but will NOT be installed:
+I seguenti pacchetti sono RACCOMANDATI ma NON verranno installati:
bzip2-doc
-0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
-Need to get 229 kB of archives. After unpacking 438 kB will be used.
-Writing extended state information...
+0 pacchetti aggiornati, 2 installati, 0 da rimuovere e 0 non aggiornati.
+È necessario prelevare 229 kB di archivi. Dopo l'estrazione, verranno occupati 438 kB.
+Scrittura delle informazioni sullo stato esteso...
Get: 1 http://ftp.us.debian.org/debian unstable/main armhf libbz2-dev armhf 1.0.6-8 [28.6 kB]
Get: 2 http://ftp.us.debian.org/debian unstable/main armhf zlib1g-dev armhf 1:1.2.8.dfsg-2+b3 [200 kB]
-Fetched 229 kB in 0s (3981 kB/s)
+Scaricato 229 kB in 0s (4'858 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
-Selecting previously unselected package libbz2-dev:armhf.
-(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 18306 files and directories currently installed.)
-Preparing to unpack .../0-libbz2-dev_1.0.6-8_armhf.deb ...
-Unpacking libbz2-dev:armhf (1.0.6-8) ...
-Selecting previously unselected package zlib1g-dev:armhf.
-Preparing to unpack .../1-zlib1g-dev_1%3a1.2.8.dfsg-2+b3_armhf.deb ...
-Unpacking zlib1g-dev:armhf (1:1.2.8.dfsg-2+b3) ...
-Setting up libbz2-dev:armhf (1.0.6-8) ...
-Setting up zlib1g-dev:armhf (1:1.2.8.dfsg-2+b3) ...
-Reading package lists...
-Building dependency tree...
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+Selezionato il pacchetto libbz2-dev:armhf non precedentemente selezionato.
+(Lettura del database...
(Lettura del database... 5%
(Lettura del database... 10%
(Lettura del database... 15%
(Lettura del database... 20%
(Lettura del database... 25%
(Lettura del database... 30%
(Lettura del database... 35%
(Lettura del database... 40%
(Lettura del database... 45%
(Lettura del database... 50%
(Lettura del database... 55%
(Lettura del database... 60%
(Lettura del database... 65%
(Lettura del database... 70%
(Lettura del database... 75%
(Lettura del database... 80%
(Lettura del database... 85%
(Lettura del database... 90%
(Lettura del database... 95%
(Lettura del database... 100%
(Lettura del database... 18306 file e directory attualmente installati.)
+Preparativi per estrarre .../0-libbz2-dev_1.0.6-8_armhf.deb...
+Estrazione di libbz2-dev:armhf (1.0.6-8)...
+Selezionato il pacchetto zlib1g-dev:armhf non precedentemente selezionato.
+Preparativi per estrarre .../1-zlib1g-dev_1%3a1.2.8.dfsg-2+b3_armhf.deb...
+Estrazione di zlib1g-dev:armhf (1:1.2.8.dfsg-2+b3)...
+Configurazione di libbz2-dev:armhf (1.0.6-8)...
+Configurazione di zlib1g-dev:armhf (1:1.2.8.dfsg-2+b3)...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
+Lettura delle informazioni sullo stato esteso...
+Inizializzazione dello stato dei pacchetti...
+Scrittura delle informazioni sullo stato esteso...
+Costruzione del database delle etichette...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
fakeroot is already the newest version (1.21-2).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.
I: Copying source file
I: copying [debdelta_0.55.dsc]
I: copying [./debdelta_0.55.tar.gz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
-gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error
-gpgv: Signature made Sun Nov 30 05:31:30 2014 -12
+gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': Errore generale
+gpgv: Signature made lun 01 dic 2014 07:31:30 +14
gpgv: using DSA key F41FED8E33FC40A4
-gpgv: Can't check signature: No public key
+gpgv: Can't check signature: Nessuna chiave pubblica
dpkg-source: warning: failed to verify signature on ./debdelta_0.55.dsc
dpkg-source: info: extracting debdelta in debdelta-0.55
dpkg-source: info: unpacking debdelta_0.55.tar.gz
I: Building the package
-I: Running cd /build/1st/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-id=armhf -rfakeroot
+I: user script /srv/workspace/pbuilder/22690/tmp/hooks/A01_modfiy_src_dir starting
+I: user script /srv/workspace/pbuilder/22690/tmp/hooks/A01_modfiy_src_dir finished
+I: Running cd /build/debdelta-0.55/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-id=armhf -rfakeroot
dpkg-buildpackage: info: source package debdelta
dpkg-buildpackage: info: source version 0.55
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by A Mennucc1 <mennucc1 at debian.org>
- dpkg-source --before-build debdelta-0.55
+ dpkg-source --before-build 2nd
dpkg-buildpackage: info: host architecture armhf
fakeroot debian/rules clean
test -f debdelta -a -f debian/rules
@@ -102,8 +115,8 @@
rm -f minigzip minibzip2
rm -rf debian/debdelta debian/debdelta-doc
debian/rules build
-gcc -DBZIP -g -O2 -fdebug-prefix-map=/build/1st/debdelta-0.55=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 minigzip.c -o minibzip2 -Wl,-z,relro -lbz2
-gcc -g -O2 -fdebug-prefix-map=/build/1st/debdelta-0.55=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 minigzip.c -o minigzip -Wl,-z,relro -lz
+gcc -DBZIP -g -O2 -fdebug-prefix-map=/build/debdelta-0.55/2nd=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 minigzip.c -o minibzip2 -Wl,-z,relro -lbz2
+gcc -g -O2 -fdebug-prefix-map=/build/debdelta-0.55/2nd=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 minigzip.c -o minigzip -Wl,-z,relro -lz
test -f debdelta -a -f debian/rules
touch build
fakeroot debian/rules binary
@@ -173,15 +186,17 @@
dpkg-genbuildinfo: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-genchanges --build=binary >../debdelta_0.55_armhf.changes
dpkg-genchanges: info: binary-only upload (no source code included)
- dpkg-source --after-build debdelta-0.55
+ dpkg-source --after-build 2nd
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/22690/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/22690/tmp/hooks/B01_cleanup finished
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/10049 and its subdirectories
-I: Current time: Mon Nov 7 03:58:41 -12 2016
-I: pbuilder-time-stamp: 1478534321
+I: removing directory /srv/workspace/pbuilder/22690 and its subdirectories
+I: Current time: mar 8 nov 2016, 06.00.46, +14
+I: pbuilder-time-stamp: 1478534446
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/debdelta_0.55.diff: 72.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/debdelta_0.55.diff.gz
b2/build.log: 72.6%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 72.7%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/armhf/debdelta_0.55.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-gTxivhgd/tmp.SlGeAvyZrp
+ mv /srv/reproducible-results/rbuild-debian-gTxivhgd/tmp.SlGeAvyZrp /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/debdelta_0.55.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/debdelta_0.55.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ filter_changes_files
+ sed -i -e '/^ [a-f0-9]\{32,64\} .*\.buildinfo$/d' b1/debdelta_0.55_armhf.changes b2/debdelta_0.55_armhf.changes
+ call_diffoscope_on_changes_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-gTxivhgd
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-gTxivhgd/tmp.YHvQ71lNrD
+ local TIMEOUT=120m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-gTxivhgd -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-gTxivhgd/dbd-tmp-HiGJgAI
++ schroot --directory /srv/reproducible-results/rbuild-debian-gTxivhgd -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 62'
++ echo diffoscope 62
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 62 will be used to compare the two builds:'
+ _log I: 'diffoscope 62 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/debdelta_0.55.rbuild.log
++ date -u
+ echo -e 'Mon Nov 7 16:00:59 UTC 2016 I: diffoscope 62 will be used to compare the two builds:'
Mon Nov 7 16:00:59 UTC 2016 I: diffoscope 62 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-gTxivhgd -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-gTxivhgd/dbd-tmp-HiGJgAI ; diffoscope --html /srv/reproducible-results/rbuild-debian-gTxivhgd/debdelta_0.55.diffoscope.html --text /srv/reproducible-results/rbuild-debian-gTxivhgd/debdelta_0.55.diffoscope.txt /srv/reproducible-results/rbuild-debian-gTxivhgd/b1/debdelta_0.55_armhf.changes /srv/reproducible-results/rbuild-debian-gTxivhgd/b2/debdelta_0.55_armhf.changes'
+ RESULT=1
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-gTxivhgd/tmp.YHvQ71lNrD
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
Mon Nov 7 16:01:03 UTC 2016 E: debdelta failed to build reproducibly in unstable on armhf.
Error: database is locked
Error: database is locked
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/debdelta_0.55.rbuild.log: 69.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/debdelta_0.55.rbuild.log.gz
INFO: Starting at 2016-11-07 16:04:03.498281
CRITICAL: SQLite database locked, could not execute query:
CRITICAL: "SELECT r.status, r.version, r.build_date
CRITICAL: FROM results AS r JOIN sources AS s
CRITICAL: ON r.package_id=s.id WHERE s.name='debdelta'
CRITICAL: AND s.architecture='amd64' AND s.suite='testing'"
CRITICAL: Exiting script.
INFO: Finished at 2016-11-07 16:05:03.628104, took: 0:01:00.129864
Warning: cannot update html pages for debdelta
Mon 7 Nov 16:05:03 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-AtlElg6t, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list