[Qa-jenkins-scm] Build failed in Jenkins: reproducible_setup_schroot_unstable_armhf_opi2a #239

jenkins at jenkins.debian.net jenkins at jenkins.debian.net
Fri Jun 2 01:47:02 UTC 2017


See <https://jenkins.debian.net/job/reproducible_setup_schroot_unstable_armhf_opi2a/239/display/redirect>

------------------------------------------
[...truncated 63.46 KB...]
Selecting previously unselected package liblua5.2-0:armhf.
Preparing to unpack .../081-liblua5.2-0_5.2.4-1.1+b2_armhf.deb ...
Unpacking liblua5.2-0:armhf (5.2.4-1.1+b2) ...
Selecting previously unselected package libnspr4:armhf.
Preparing to unpack .../082-libnspr4_2%3a4.12-6_armhf.deb ...
Unpacking libnspr4:armhf (2:4.12-6) ...
Selecting previously unselected package libnss3:armhf.
Preparing to unpack .../083-libnss3_2%3a3.26.2-1_armhf.deb ...
Unpacking libnss3:armhf (2:3.26.2-1) ...
Selecting previously unselected package librpmio3.
Preparing to unpack .../084-librpmio3_4.12.0.2+dfsg1-2_armhf.deb ...
Unpacking librpmio3 (4.12.0.2+dfsg1-2) ...
Selecting previously unselected package librpm3.
Preparing to unpack .../085-librpm3_4.12.0.2+dfsg1-2_armhf.deb ...
Unpacking librpm3 (4.12.0.2+dfsg1-2) ...
Selecting previously unselected package libyaml-0-2:armhf.
Preparing to unpack .../086-libyaml-0-2_0.1.7-2_armhf.deb ...
Unpacking libyaml-0-2:armhf (0.1.7-2) ...
Selecting previously unselected package libyojson-ocaml.
Preparing to unpack .../087-libyojson-ocaml_1.3.2-1+b1_armhf.deb ...
Unpacking libyojson-ocaml (1.3.2-1+b1) ...
Selecting previously unselected package libyojson-ocaml-dev.
Preparing to unpack .../088-libyojson-ocaml-dev_1.3.2-1+b1_armhf.deb ...
Unpacking libyojson-ocaml-dev (1.3.2-1+b1) ...
Selecting previously unselected package python-apt-common.
Preparing to unpack .../089-python-apt-common_1.4.0~beta3_all.deb ...
Unpacking python-apt-common (1.4.0~beta3) ...
Selecting previously unselected package python3-apt.
Preparing to unpack .../090-python3-apt_1.4.0~beta3_armhf.deb ...
Unpacking python3-apt (1.4.0~beta3) ...
Selecting previously unselected package python3-pkg-resources.
Preparing to unpack .../091-python3-pkg-resources_33.1.1-1_all.deb ...
Unpacking python3-pkg-resources (33.1.1-1) ...
Selecting previously unselected package python3-chardet.
Preparing to unpack .../092-python3-chardet_2.3.0-2_all.deb ...
Unpacking python3-chardet (2.3.0-2) ...
Selecting previously unselected package python3-six.
Preparing to unpack .../093-python3-six_1.10.0-4_all.deb ...
Unpacking python3-six (1.10.0-4) ...
Selecting previously unselected package python3-debian.
Preparing to unpack .../094-python3-debian_0.1.30_all.deb ...
Unpacking python3-debian (0.1.30) ...
Selecting previously unselected package python3-decorator.
Preparing to unpack .../095-python3-decorator_4.0.11-1_all.deb ...
Unpacking python3-decorator (4.0.11-1) ...
Selecting previously unselected package python3-networkx.
Preparing to unpack .../096-python3-networkx_1.11-2_all.deb ...
Unpacking python3-networkx (1.11-2) ...
Selecting previously unselected package python3-pygraphviz.
Preparing to unpack .../097-python3-pygraphviz_1.4~rc1-1_armhf.deb ...
Unpacking python3-pygraphviz (1.4~rc1-1) ...
Selecting previously unselected package python3-yaml.
Preparing to unpack .../098-python3-yaml_3.12-1_armhf.deb ...
Unpacking python3-yaml (3.12-1) ...
Selecting previously unselected package clasp.
Preparing to unpack .../099-clasp_3.3.0-1_armhf.deb ...
Unpacking clasp (3.3.0-1) ...
Selecting previously unselected package aspcud.
Preparing to unpack .../100-aspcud_1%3a1.9.1-2+b1_armhf.deb ...
Unpacking aspcud (1:1.9.1-2+b1) ...
Selecting previously unselected package dose-builddebcheck.
Preparing to unpack .../101-dose-builddebcheck_5.0.1-8_armhf.deb ...
Unpacking dose-builddebcheck (5.0.1-8) ...
Selecting previously unselected package dose-extra.
Preparing to unpack .../102-dose-extra_5.0.1-8_armhf.deb ...
Unpacking dose-extra (5.0.1-8) ...
Selecting previously unselected package zutils.
Preparing to unpack .../103-zutils_1.5-5+b1_armhf.deb ...
Unpacking zutils (1.5-5+b1) ...
Selecting previously unselected package botch.
Preparing to unpack .../104-botch_0.21-3_armhf.deb ...
Unpacking botch (0.21-3) ...
Setting up python-apt-common (1.4.0~beta3) ...
Setting up libgomp1:armhf (6.3.0-18.0~reproducible1) ...
Setting up libatomic1:armhf (6.3.0-18.0~reproducible1) ...
Setting up perl-modules-5.24 (5.24.1-3) ...
Setting up libperl5.24:armhf (5.24.1-3) ...
Setting up libpathplan4 (2.38.0-17) ...
Setting up libcc1-0:armhf (6.3.0-18.0~reproducible1) ...
Setting up make (4.1-9.1) ...
Setting up libasan3:armhf (6.3.0-18.0~reproducible1) ...
Setting up libxdot4 (2.38.0-17) ...
Setting up libjpeg62-turbo:armhf (1:1.5.1-2) ...
Setting up mime-support (3.60) ...
Setting up libpng16-16:armhf (1.6.28-1) ...
Setting up libjbig0:armhf (2.1-3.1+b2) ...
Setting up fonts-dejavu-core (2.37-1) ...
Setting up libubsan0:armhf (6.3.0-18.0~reproducible1) ...
Setting up libglib2.0-0:armhf (2.50.3-2) ...
No schema files found: doing nothing.
Setting up ocaml-base-nox (4.02.3-9) ...
Setting up linux-libc-dev:armhf (4.9.25-1) ...
Setting up libtinfo-dev:armhf (6.0+20161126-1) ...
Setting up dctrl-tools (2.24-2+b1) ...
Setting up libdatrie1:armhf (0.2.10-4+b1) ...
Setting up libtiff5:armhf (4.0.8-1) ...
Setting up libnspr4:armhf (2:4.12-6) ...
Setting up ucf (3.0036) ...
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
Setting up clasp (3.3.0-1) ...
Setting up libfreetype6:armhf (2.6.3-3.2) ...
Setting up bzip2 (1.0.6-8.1) ...
Setting up libgraphite2-3:armhf (1.3.10-1) ...
Setting up perl (5.24.1-3) ...
update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode
Setting up libisl15:armhf (0.18-1) ...
Setting up libyaml-0-2:armhf (0.1.7-2) ...
Setting up libpixman-1-0:armhf (0.34.0-1) ...
Setting up patch (2.7.5-1+b2) ...
Processing triggers for libc-bin (2.24-11) ...
Setting up xz-utils (5.2.2-1.2+b1) ...
update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode
Processing triggers for systemd (232-24) ...
Setting up libltdl7:armhf (2.4.6-2) ...
Setting up libann0 (1.1.2+doc-6) ...
Setting up libmpfr4:armhf (3.1.5-1) ...
Setting up libmpc3:armhf (1.0.3-1+b2) ...
Setting up binutils (2.28-5) ...
Setting up cpp-6 (6.3.0-18.0~reproducible1) ...
Setting up libc-dev-bin (2.24-11) ...
Setting up liblua5.2-0:armhf (5.2.4-1.1+b2) ...
Setting up libthai-data (0.1.26-1) ...
Setting up libxdmcp6:armhf (1:1.1.2-3) ...
Setting up libpython2.7-minimal:armhf (2.7.13-2) ...
Setting up x11-common (1:7.7+19) ...
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
Running in chroot, ignoring request.
invoke-rc.d: policy-rc.d denied execution of start.
Setting up liblua5.3-0:armhf (5.3.3-1) ...
Setting up libc6-dev:armhf (2.24-11) ...
Setting up libeasy-format-ocaml (1.2.0-1) ...
Setting up libcdt5 (2.38.0-17) ...
Setting up zutils (1.5-5+b1) ...
Setting up libx11-data (2:1.6.4-3) ...
Setting up libpython2.7-stdlib:armhf (2.7.13-2) ...
Setting up libxau6:armhf (1:1.0.8-1) ...
Setting up libmpdec2:armhf (2.4.2-1) ...
Setting up libcgraph6 (2.38.0-17) ...
Setting up libwebp6:armhf (0.5.2-1) ...
Setting up dose-builddebcheck (5.0.1-8) ...
Setting up cpp (4:6.3.0-4) ...
Setting up libgts-0.7-5:armhf (0.7.6+darcs121130-4) ...
Setting up fontconfig-config (2.11.0-6.7) ...
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
Setting up libgcc-6-dev:armhf (6.3.0-18.0~reproducible1) ...
Setting up libgvpr2 (2.38.0-17) ...
Setting up libpython3.5-stdlib:armhf (3.5.3-1) ...
Setting up libdpkg-perl (1.18.24.0~reproducible1) ...
Setting up libnss3:armhf (2:3.26.2-1) ...
Setting up libharfbuzz0b:armhf (1.4.2-1) ...
Setting up libthai0:armhf (0.1.26-1) ...
Setting up gcc-6 (6.3.0-18.0~reproducible1) ...
Setting up libncurses5-dev:armhf (6.0+20161126-1) ...
Setting up dpkg-dev (1.18.24.0~reproducible1) ...
Setting up libpython2.7:armhf (2.7.13-2) ...
Setting up libice6:armhf (2:1.0.9-2) ...
Setting up libbiniou-ocaml (1.0.12-2+b1) ...
Setting up librpmio3 (4.12.0.2+dfsg1-2) ...
Setting up libxcb1:armhf (1.12-1) ...
Setting up python3.5 (3.5.3-1) ...
Setting up libpython3-stdlib:armhf (3.5.3-1) ...
Setting up libfontconfig1:armhf (2.11.0-6.7+b1) ...
Setting up libsm6:armhf (2:1.2.2-1+b3) ...
Setting up libxcb-render0:armhf (1.12-1) ...
Setting up gringo (5.1.0-4) ...
Setting up libx11-6:armhf (2:1.6.4-3) ...
Setting up libyojson-ocaml (1.3.2-1+b1) ...
Setting up gcc (4:6.3.0-4) ...
Setting up aspcud (1:1.9.1-2+b1) ...
Setting up librpm3 (4.12.0.2+dfsg1-2) ...
Setting up libxcb-shm0:armhf (1.12-1) ...
Setting up libxpm4:armhf (1:3.5.12-1) ...
Setting up libxt6:armhf (1:1.1.5-1) ...
Setting up libxrender1:armhf (1:0.9.10-1) ...
Setting up fontconfig (2.11.0-6.7+b1) ...
Regenerating fonts cache... done.
Setting up libxext6:armhf (2:1.3.3-1+b2) ...
Setting up libgd3:armhf (2.2.4-2) ...
Setting up dose-extra (5.0.1-8) ...
Setting up libxmu6:armhf (2:1.1.2-2) ...
Setting up libpango-1.0-0:armhf (1.40.5-1) ...
Setting up libxaw7:armhf (2:1.0.13-1+b2) ...
Setting up libcairo2:armhf (1.14.8-1) ...
Setting up libpangoft2-1.0-0:armhf (1.40.5-1) ...
Setting up libpangocairo-1.0-0:armhf (1.40.5-1) ...
Setting up libgvc6 (2.38.0-17) ...
Setting up graphviz (2.38.0-17) ...
Setting up python3 (3.5.3-1) ...
running python rtupdate hooks for python3.5...
running python post-rtupdate hooks for python3.5...
Setting up python3-six (1.10.0-4) ...
Setting up python3-pkg-resources (33.1.1-1) ...
Setting up python3-chardet (2.3.0-2) ...
Setting up dh-python (2.20170125) ...
Setting up python3-decorator (4.0.11-1) ...
Setting up python3-debian (0.1.30) ...
Setting up ocaml-compiler-libs (4.02.3-9) ...
Setting up python3-yaml (3.12-1) ...
Setting up python3-apt (1.4.0~beta3) ...
Setting up python3-pygraphviz (1.4~rc1-1) ...
Setting up ocaml-interp (4.02.3-9) ...
Setting up python3-networkx (1.11-2) ...
Setting up ocaml-nox (4.02.3-9) ...
Setting up libeasy-format-ocaml-dev (1.2.0-1) ...
Setting up libbiniou-ocaml-dev (1.0.12-2+b1) ...
Setting up libyojson-ocaml-dev (1.3.2-1+b1) ...
Setting up botch (0.21-3) ...
Processing triggers for libc-bin (2.24-11) ...
Processing triggers for systemd (232-24) ...
++ egrep 'Failed to fetch.*(Unable to connect to|Connection failed|Size mismatch|Cannot initiate the connection to|Bad Gateway|Service Unavailable)' /tmp/schroot-create-V49nVBMf
++ true
+ local RESULT=
+ set -e
+ '[' '!' -z '' ']'
+ rm -f /tmp/schroot-create-V49nVBMf
+ '[' unstable = unstable ']'
+ '[' botch = diffoscope ']'
+ '[' unstable = testing ']'
+ false
+ set +x
umount: /schroots/schroot-install-reproducible-unstable-BobC/dev/pts: not mounted
rm: skipping ‘/schroots/schroot-install-reproducible-unstable-BobC/proc’, since it's on a different device
rm: skipping ‘/schroots/schroot-install-reproducible-unstable-BobC/dev’, since it's on a different device
Warning: /schroots/schroot-install-reproducible-unstable-BobC could not be fully removed on forced cleanup.
total 8
drwxr-xr-x   4 root    root    4096 Jun  2 01:47 .
drwxr-xr-x  14 jenkins jenkins 4096 Jun  2 01:40 ..
drwxr-xr-x  15 root    root    3320 Jun  1 20:30 dev
dr-xr-xr-x 259 root    root       0 Jan  1  1970 proc
Fri  2 Jun 01:47:02 UTC 2017 - /srv/jenkins/bin/schroot-create.sh stopped running as /tmp/jenkins-script-VvXVbipj, which will now be removed.

SSH EXIT CODE: 32
Build step 'Execute shell' marked build as failure



More information about the Qa-jenkins-scm mailing list