[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfcf0000 (usable) [ 0.000000] BIOS-e820: 00000000bfcf0000 - 00000000bfcf1000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfcf1000 - 00000000bfd00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfd00000 - 00000000bfe00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xbfcf0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BFD00000 mask FFFFFFF00000 uncachable [ 0.000000] 3 base 0000BFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00373fe000 page 4k [ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000 [ 0.000000] RAMDISK: 377cf000 - 37fefade [ 0.000000] Allocated new RAMDISK: 00100000 - 00920ade [ 0.000000] Move RAMDISK from 00000000377cf000 - 0000000037fefadd to 00100000 - 00920add [ 0.000000] ACPI: RSDP 000f5e40 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT bfcf1000 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP bfcf1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT bfcf1100 076DC (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS bfcf0000 00040 [ 0.000000] ACPI: SSDT bfcf88c0 006E8 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET bfcf8fc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG bfcf9000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: MATS bfcf9040 00034 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG bfcf90b0 00202 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC bfcf8800 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2184MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram: 00000000 - 373fe000 [ 0.000000] node 0 bootmap 00009000 - 0000fe80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014c9bb4] TEXT DATA BSS ==> [0001000000 - 00014c9bb4] [ 0.000000] #4 [000009a000 - 0000100000] BIOS reserved ==> [000009a000 - 0000100000] [ 0.000000] #5 [00014ca000 - 00014d00fe] BRK ==> [00014ca000 - 00014d00fe] [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #7 [0000100000 - 0000920ade] NEW RAMDISK ==> [0000100000 - 0000920ade] [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] found SMP MP-table at [c00f44a0] f44a0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x000bfcf0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x000bfcf0 [ 0.000000] On node 0 totalpages: 785546 [ 0.000000] free_area_init_node: node 0, pgdat c13b2860, node_mem_map c14d2000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3962 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4370 pages used for memmap [ 0.000000] HighMem zone: 554976 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 5 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bfe00000 (gap: bfe00000:20200000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s34296 r0 d23048 u524288 [ 0.000000] pcpu-alloc: s34296 r0 d23048 u524288 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779408 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=08b71017-3b81-454f-b7fe-9257e3625ed2 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000373fe:000bfcf0) [ 0.000000] Memory: 3101668k/3142592k available (2501k kernel code, 39176k reserved, 1323k data, 376k init, 2237384k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc13bd000 - 0xc141b000 ( 376 kB) [ 0.000000] .data : 0xc12716a1 - 0xc13bc460 (1323 kB) [ 0.000000] .text : 0xc1000000 - 0xc12716a1 (2501 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3013.366 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6026.73 BogoMIPS (lpj=12053464) [ 0.004016] Security Framework initialized [ 0.004019] SELinux: Disabled at boot. [ 0.004024] Mount-cache hash table entries: 512 [ 0.004105] Initializing cgroup subsys ns [ 0.004107] Initializing cgroup subsys cpuacct [ 0.004109] Initializing cgroup subsys devices [ 0.004111] Initializing cgroup subsys freezer [ 0.004112] Initializing cgroup subsys net_cls [ 0.004125] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004127] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004128] CPU: Physical Processor ID: 0 [ 0.004129] CPU: Processor Core ID: 0 [ 0.004132] mce: CPU supports 6 MCE banks [ 0.004138] using C1E aware idle routine [ 0.004142] Performance Events: AMD PMU driver. [ 0.004145] ... version: 0 [ 0.004146] ... bit width: 48 [ 0.004148] ... generic registers: 4 [ 0.004149] ... value mask: 0000ffffffffffff [ 0.004150] ... max period: 00007fffffffffff [ 0.004151] ... fixed-purpose events: 0 [ 0.004152] ... event mask: 000000000000000f [ 0.004155] Checking 'hlt' instruction... OK. [ 0.020580] ACPI: Core revision 20090903 [ 0.028058] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.028450] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072384] CPU0: AMD Athlon(tm) II X3 440 Processor stepping 03 [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.160062] CPU1: AMD Athlon(tm) II X3 440 Processor stepping 03 [ 0.160068] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.164032] System has AMD C1E enabled [ 0.164032] Switch to broadcast mode on CPU1 [ 0.164066] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.008000] Initializing CPU#2 [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 2 [ 0.252094] CPU2: AMD Athlon(tm) II X3 440 Processor stepping 03 [ 0.252099] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.256038] Brought up 3 CPUs [ 0.256040] Total of 3 processors activated (18079.82 BogoMIPS). [ 0.256037] Switch to broadcast mode on CPU2 [ 0.256263] CPU0 attaching sched-domain: [ 0.256265] domain 0: span 0-2 level MC [ 0.256267] groups: 0 1 2 [ 0.256270] CPU1 attaching sched-domain: [ 0.256272] domain 0: span 0-2 level MC [ 0.256273] groups: 1 2 0 [ 0.256276] CPU2 attaching sched-domain: [ 0.256277] domain 0: span 0-2 level MC [ 0.256278] groups: 2 0 1 [ 0.256331] Switch to broadcast mode on CPU0 [ 0.256331] devtmpfs: initialized [ 0.256331] regulator: core version 0.5 [ 0.256331] NET: Registered protocol family 16 [ 0.256331] ACPI: bus type pci registered [ 0.256331] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.256331] PCI: MCFG area at e0000000 reserved in E820 [ 0.256331] PCI: Using MMCONFIG for extended config space [ 0.256331] PCI: Using configuration type 1 for base access [ 0.256347] bio: create slab at 0 [ 0.256347] ACPI: EC: Look up EC in DSDT [ 0.257643] ACPI Warning: Package List length (0x1) larger than NumElements count (0x0), truncated [ 0.257647] (20090903/dsobject-515) [ 0.257651] ACPI Warning: Package List length (0x1) larger than NumElements count (0x0), truncated [ 0.257654] (20090903/dsobject-515) [ 0.263154] ACPI: Interpreter enabled [ 0.263158] ACPI: (supports S0 S3 S4 S5) [ 0.263175] ACPI: Using IOAPIC for interrupt routing [ 0.266017] ACPI Warning: Incorrect checksum in table [TAMG] - 45, should be 44 (20090903/tbutils-314) [ 0.266089] ACPI: No dock devices found. [ 0.266171] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.266201] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] [ 0.266244] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.266246] pci 0000:00:02.0: PME# disabled [ 0.266278] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.266280] pci 0000:00:0a.0: PME# disabled [ 0.266319] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07] [ 0.266324] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03] [ 0.266329] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07] [ 0.266334] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03] [ 0.266338] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f] [ 0.266343] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] [ 0.266387] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] [ 0.266437] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02d000-0xfe02d0ff] [ 0.266472] pci 0000:00:12.2: supports D1 D2 [ 0.266473] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.266476] pci 0000:00:12.2: PME# disabled [ 0.266498] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.266547] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02b000-0xfe02b0ff] [ 0.266582] pci 0000:00:13.2: supports D1 D2 [ 0.266584] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.266587] pci 0000:00:13.2: PME# disabled [ 0.266641] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.266646] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.266651] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.266656] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.266660] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f] [ 0.266741] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.266805] pci 0000:00:15.0: supports D1 D2 [ 0.266853] pci 0000:00:15.1: supports D1 D2 [ 0.266879] pci 0000:00:16.0: reg 10 32bit mmio: [0xfe029000-0xfe029fff] [ 0.266929] pci 0000:00:16.2: reg 10 32bit mmio: [0xfe028000-0xfe0280ff] [ 0.266964] pci 0000:00:16.2: supports D1 D2 [ 0.266965] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.266968] pci 0000:00:16.2: PME# disabled [ 0.267058] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.267067] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.267077] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.267083] pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f] [ 0.267088] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.272077] pci 0000:00:02.0: bridge io port: [0xe000-0xefff] [ 0.272081] pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.272084] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.272119] pci 0000:02:00.0: reg 10 io port: [0xde00-0xdeff] [ 0.272133] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdeff000-0xfdefffff] [ 0.272143] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdef8000-0xfdefbfff] [ 0.272148] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.272176] pci 0000:02:00.0: supports D1 D2 [ 0.272178] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.272181] pci 0000:02:00.0: PME# disabled [ 0.280077] pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff] [ 0.280080] pci 0000:00:0a.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff] [ 0.280083] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff] [ 0.280118] pci 0000:03:08.0: reg 10 32bit mmio: [0xfd700000-0xfd7fffff] [ 0.280183] pci 0000:00:14.4: transparent bridge [ 0.280186] pci 0000:00:14.4: bridge io port: [0xc000-0xcfff] [ 0.280190] pci 0000:00:14.4: bridge 32bit mmio: [0xfd700000-0xfd8fffff] [ 0.280193] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.280272] pci 0000:04:00.0: reg 24 32bit mmio: [0x000000-0x001fff] [ 0.280306] pci 0000:04:00.0: PME# supported from D3hot [ 0.280310] pci 0000:04:00.0: PME# disabled [ 0.280357] pci 0000:04:00.1: reg 10 io port: [0x00-0x07] [ 0.280364] pci 0000:04:00.1: reg 14 io port: [0x00-0x03] [ 0.280372] pci 0000:04:00.1: reg 18 io port: [0x00-0x07] [ 0.280379] pci 0000:04:00.1: reg 1c io port: [0x00-0x03] [ 0.280387] pci 0000:04:00.1: reg 20 io port: [0x00-0x0f] [ 0.280447] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.280511] pci 0000:00:15.0: bridge io port: [0xb000-0xbfff] [ 0.280513] pci 0000:00:15.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.280518] pci 0000:00:15.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.280551] pci 0000:00:15.1: bridge io port: [0xa000-0xafff] [ 0.280554] pci 0000:00:15.1: bridge 32bit mmio: [0xfdb00000-0xfdbfffff] [ 0.280558] pci 0000:00:15.1: bridge 64bit mmio pref: [0xfda00000-0xfdafffff] [ 0.280572] pci_bus 0000:00: on NUMA node 0 [ 0.280579] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.280799] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.280837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.280882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.280950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.280999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.295617] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 [ 0.295688] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 [ 0.295757] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 [ 0.295826] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 [ 0.295893] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 [ 0.295961] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 [ 0.296046] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 [ 0.296114] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 [ 0.296186] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.296189] vgaarb: loaded [ 0.296205] PCI: Using ACPI for IRQ routing [ 0.296205] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] [ 0.296205] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.296230] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.296233] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.298252] Switching to clocksource tsc [ 0.298265] pnp: PnP ACPI init [ 0.298265] ACPI: bus type pnp registered [ 0.298265] pnp 00:08: mem resource (0xd4200-0xd7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.298265] pnp 00:08: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.298265] pnp 00:08: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.298265] pnp 00:08: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.298265] pnp 00:08: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.298265] pnp 00:08: mem resource (0x100000-0xbfceffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.298265] pnp: PnP ACPI: found 9 devices [ 0.298265] ACPI: ACPI bus type pnp unregistered [ 0.298265] PnPBIOS: Disabled by ACPI PNP [ 0.298265] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.298265] system 00:01: ioport range 0x220-0x225 has been reserved [ 0.298265] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.298265] system 00:02: ioport range 0x4100-0x411f has been reserved [ 0.298265] system 00:02: ioport range 0x228-0x22f has been reserved [ 0.298265] system 00:02: ioport range 0x40b-0x40b has been reserved [ 0.298265] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 0.298265] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 0.298265] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 0.298265] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 0.298265] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 0.298265] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 0.298265] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 0.298265] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 0.298265] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 0.298265] system 00:02: ioport range 0x4000-0x40fe has been reserved [ 0.298265] system 00:02: ioport range 0x4210-0x4217 has been reserved [ 0.298265] system 00:02: ioport range 0xb00-0xb0f has been reserved [ 0.298265] system 00:02: ioport range 0xb10-0xb1f has been reserved [ 0.298265] system 00:02: ioport range 0xb20-0xb3f has been reserved [ 0.298265] system 00:07: iomem range 0xe0000000-0xefffffff has been reserved [ 0.298265] system 00:08: iomem range 0xbfcf0000-0xbfcfffff could not be reserved [ 0.298265] system 00:08: iomem range 0xffff0000-0xffffffff has been reserved [ 0.298265] system 00:08: iomem range 0xbfd00000-0xbfdfffff has been reserved [ 0.298265] system 00:08: iomem range 0xbfe00000-0xbfefffff could not be reserved [ 0.298265] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.298265] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.298265] system 00:08: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.332974] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.332976] pci 0000:00:02.0: IO window: 0xe000-0xefff [ 0.332979] pci 0000:00:02.0: MEM window: 0xf8000000-0xfbffffff [ 0.332982] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.332985] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.332987] pci 0000:00:0a.0: IO window: 0xd000-0xdfff [ 0.332990] pci 0000:00:0a.0: MEM window: 0xfd900000-0xfd9fffff [ 0.332992] pci 0000:00:0a.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff [ 0.332995] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 0.332997] pci 0000:00:14.4: IO window: 0xc000-0xcfff [ 0.333001] pci 0000:00:14.4: MEM window: 0xfd700000-0xfd8fffff [ 0.333004] pci 0000:00:14.4: PREFETCH window: 0xfdf00000-0xfdffffff [ 0.333028] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04 [ 0.333030] pci 0000:00:15.0: IO window: 0xb000-0xbfff [ 0.333034] pci 0000:00:15.0: MEM window: 0xfdd00000-0xfddfffff [ 0.333036] pci 0000:00:15.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff [ 0.333040] pci 0000:00:15.1: PCI bridge, secondary bus 0000:05 [ 0.333043] pci 0000:00:15.1: IO window: 0xa000-0xafff [ 0.333046] pci 0000:00:15.1: MEM window: 0xfdb00000-0xfdbfffff [ 0.333048] pci 0000:00:15.1: PREFETCH window: 0x000000fda00000-0x000000fdafffff [ 0.333061] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.333065] pci 0000:00:02.0: setting latency timer to 64 [ 0.333069] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.333071] pci 0000:00:0a.0: setting latency timer to 64 [ 0.333083] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.333085] pci 0000:00:15.0: setting latency timer to 64 [ 0.333091] pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.333094] pci 0000:00:15.1: setting latency timer to 64 [ 0.333097] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.333098] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.333100] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.333102] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.333104] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.333106] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.333107] pci_bus 0000:02: resource 1 mem: [0xfd900000-0xfd9fffff] [ 0.333109] pci_bus 0000:02: resource 2 pref mem [0xfde00000-0xfdefffff] [ 0.333111] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.333113] pci_bus 0000:03: resource 1 mem: [0xfd700000-0xfd8fffff] [ 0.333114] pci_bus 0000:03: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.333116] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.333118] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.333120] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff] [ 0.333121] pci_bus 0000:04: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.333123] pci_bus 0000:04: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 0.333125] pci_bus 0000:05: resource 0 io: [0xa000-0xafff] [ 0.333127] pci_bus 0000:05: resource 1 mem: [0xfdb00000-0xfdbfffff] [ 0.333128] pci_bus 0000:05: resource 2 pref mem [0xfda00000-0xfdafffff] [ 0.333151] NET: Registered protocol family 2 [ 0.333214] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.333430] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.333840] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.334070] TCP: Hash tables configured (established 131072 bind 65536) [ 0.334072] TCP reno registered [ 0.334151] NET: Registered protocol family 1 [ 0.397469] pci 0000:01:00.0: Boot video device [ 0.397512] Unpacking initramfs... [ 0.547841] Freeing initrd memory: 8322k freed [ 0.551144] audit: initializing netlink socket (disabled) [ 0.551154] type=2000 audit(1295514937.549:1): initialized [ 0.553425] highmem bounce pool size: 64 pages [ 0.553428] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.554390] VFS: Disk quotas dquot_6.5.2 [ 0.554443] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.554494] msgmni has been set to 1706 [ 0.554714] alg: No test for stdrng (krng) [ 0.554788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.554791] io scheduler noop registered [ 0.554793] io scheduler anticipatory registered [ 0.554794] io scheduler deadline registered [ 0.554819] io scheduler cfq registered (default) [ 0.554890] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X [ 0.554894] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.554950] pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X [ 0.554953] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.555023] pcieport 0000:00:15.0: irq 26 for MSI/MSI-X [ 0.555028] pcieport 0000:00:15.0: setting latency timer to 64 [ 0.555104] pcieport 0000:00:15.1: irq 27 for MSI/MSI-X [ 0.555110] pcieport 0000:00:15.1: setting latency timer to 64 [ 0.555209] isapnp: Scanning for PnP cards... [ 0.908549] isapnp: No Plug & Play device found [ 0.909247] Linux agpgart interface v0.103 [ 0.909460] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.909664] PNP: No PS/2 controller found. Probing ports directly. [ 0.942200] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 0.942201] If AUX port is really absent please use the 'i8042.noaux' option. [ 1.196202] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.196292] mice: PS/2 mouse device common for all mice [ 1.196324] rtc_cmos 00:04: RTC can wake from S4 [ 1.196351] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.196375] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.196382] cpuidle: using governor ladder [ 1.196383] cpuidle: using governor menu [ 1.196386] No iBFT detected. [ 1.196616] TCP cubic registered [ 1.196698] NET: Registered protocol family 10 [ 1.196991] lo: Disabled Privacy Extensions [ 1.197187] Mobile IPv6 [ 1.197189] NET: Registered protocol family 17 [ 1.197201] Using IPI No-Shortcut mode [ 1.197239] PM: Resume from disk failed. [ 1.197245] registered taskstats version 1 [ 1.197570] rtc_cmos 00:04: setting system clock to 2011-01-20 09:15:39 UTC (1295514939) [ 1.197591] Initalizing network drop monitor service [ 1.197609] Freeing unused kernel memory: 376k freed [ 1.197770] Write protecting the kernel text: 2504k [ 1.197787] Write protecting the kernel read-only data: 920k [ 1.211535] udev[66]: starting version 164 [ 1.260854] SCSI subsystem initialized [ 1.266570] usbcore: registered new interface driver usbfs [ 1.266591] usbcore: registered new interface driver hub [ 1.266611] usbcore: registered new device driver usb [ 1.267972] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.267995] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.268010] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.268025] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.268049] ehci_hcd 0000:00:12.2: debug port 1 [ 1.268071] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000 [ 1.276283] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.276303] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.276307] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.276309] usb usb1: Product: EHCI Host Controller [ 1.276310] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 1.276312] usb usb1: SerialNumber: 0000:00:12.2 [ 1.276385] usb usb1: configuration #1 chosen from 1 choice [ 1.276406] hub 1-0:1.0: USB hub found [ 1.276412] hub 1-0:1.0: 5 ports detected [ 1.276457] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.276474] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.276479] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.276500] ehci_hcd 0000:00:13.2: debug port 1 [ 1.276513] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000 [ 1.279768] libata version 3.00 loaded. [ 1.281706] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.281723] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.281752] r8169 0000:02:00.0: setting latency timer to 64 [ 1.281788] r8169 0000:02:00.0: irq 28 for MSI/MSI-X [ 1.282185] eth0: RTL8168d/8111d at 0xf7dea000, 1c:6f:65:4c:6c:f3, XID 083000c0 IRQ 28 [ 1.287748] r8169 0000:02:00.0: firmware: requesting rtl_nic/rtl8168d-2.fw [ 1.288287] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.288307] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.288309] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.288311] usb usb2: Product: EHCI Host Controller [ 1.288313] usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 1.288314] usb usb2: SerialNumber: 0000:00:13.2 [ 1.288386] usb usb2: configuration #1 chosen from 1 choice [ 1.288406] hub 2-0:1.0: USB hub found [ 1.288412] hub 2-0:1.0: 5 ports detected [ 1.288454] ahci 0000:00:11.0: version 3.0 [ 1.288468] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.288504] ahci 0000:00:11.0: irq 29 for MSI/MSI-X [ 1.288569] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.288572] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.288816] scsi0 : ahci [ 1.288920] scsi1 : ahci [ 1.288956] scsi2 : ahci [ 1.288989] scsi3 : ahci [ 1.289069] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 29 [ 1.289073] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 29 [ 1.289077] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 29 [ 1.289080] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 29 [ 1.289121] ahci 0000:04:00.0: enabling device (0000 -> 0002) [ 1.289129] ahci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.289133] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.289154] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 1.289171] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.289201] ehci_hcd 0000:00:16.2: debug port 1 [ 1.289214] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000 [ 1.289636] eth0: unable to apply firmware patch [ 1.300333] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.300352] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.300354] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.300356] usb usb3: Product: EHCI Host Controller [ 1.300357] usb usb3: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 1.300359] usb usb3: SerialNumber: 0000:00:16.2 [ 1.300428] usb usb3: configuration #1 chosen from 1 choice [ 1.300448] hub 3-0:1.0: USB hub found [ 1.300454] hub 3-0:1.0: 4 ports detected [ 1.308103] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.308107] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.308114] ahci 0000:04:00.0: setting latency timer to 64 [ 1.308335] scsi4 : ahci [ 1.308442] scsi5 : ahci [ 1.308496] ata5: SATA max UDMA/133 abar m8192@0xfdd00000 port 0xfdd00100 irq 17 [ 1.308500] ata6: SATA max UDMA/133 abar m8192@0xfdd00000 port 0xfdd00180 irq 17 [ 1.356955] pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.357063] scsi6 : pata_atiixp [ 1.357116] scsi7 : pata_atiixp [ 1.357820] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.357822] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.369584] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.369605] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.369619] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.369629] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.369655] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000 [ 1.380583] pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001) [ 1.380590] pata_jmicron 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.380616] pata_jmicron 0000:04:00.1: setting latency timer to 64 [ 1.380688] scsi8 : pata_jmicron [ 1.380745] scsi9 : pata_jmicron [ 1.380769] ata9: PATA max UDMA/100 cmd 0xb010 ctl 0xb020 bmdma 0xb000 irq 17 [ 1.380771] ata10: PATA max UDMA/100 cmd 0xb018 ctl 0xb024 bmdma 0xb008 irq 17 [ 1.428066] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.428069] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.428071] usb usb4: Product: OHCI Host Controller [ 1.428072] usb usb4: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 1.428074] usb usb4: SerialNumber: 0000:00:12.0 [ 1.428147] usb usb4: configuration #1 chosen from 1 choice [ 1.428167] hub 4-0:1.0: USB hub found [ 1.428176] hub 4-0:1.0: 5 ports detected [ 1.428222] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.428252] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.428261] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.428276] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000 [ 1.484063] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.484066] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.484067] usb usb5: Product: OHCI Host Controller [ 1.484069] usb usb5: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 1.484070] usb usb5: SerialNumber: 0000:00:13.0 [ 1.484143] usb usb5: configuration #1 chosen from 1 choice [ 1.484162] hub 5-0:1.0: USB hub found [ 1.484171] hub 5-0:1.0: 5 ports detected [ 1.484217] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.484235] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.484252] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.484268] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000 [ 1.540311] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.540314] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.540316] usb usb6: Product: OHCI Host Controller [ 1.540317] usb usb6: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 1.540319] usb usb6: SerialNumber: 0000:00:14.5 [ 1.540391] usb usb6: configuration #1 chosen from 1 choice [ 1.540413] hub 6-0:1.0: USB hub found [ 1.540423] hub 6-0:1.0: 2 ports detected [ 1.540463] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.540481] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 1.540488] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.540508] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000 [ 1.604322] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.604325] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.604327] usb usb7: Product: OHCI Host Controller [ 1.604328] usb usb7: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 1.604329] usb usb7: SerialNumber: 0000:00:16.0 [ 1.604402] usb usb7: configuration #1 chosen from 1 choice [ 1.604421] hub 7-0:1.0: USB hub found [ 1.604430] hub 7-0:1.0: 4 ports detected [ 1.612348] ata4: SATA link down (SStatus 0 SControl 300) [ 1.612370] ata3: SATA link down (SStatus 0 SControl 300) [ 1.628090] ata5: SATA link down (SStatus 0 SControl 300) [ 1.628340] ata6: SATA link down (SStatus 0 SControl 300) [ 1.660076] usb 2-3: new high speed USB device using ehci_hcd and address 3 [ 1.776089] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.776103] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.781127] ata1.00: ATA-7: SAMSUNG HD160JJ, ZM100-33, max UDMA7 [ 1.781130] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.786237] ata1.00: configured for UDMA/133 [ 1.796753] ata2.00: ATA-8: SAMSUNG HD403LJ, CT100-13, max UDMA7 [ 1.796756] ata2.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.798880] ata2.00: configured for UDMA/133 [ 1.800701] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ ZM10 PQ: 0 ANSI: 5 [ 1.812693] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD403LJ CT10 PQ: 0 ANSI: 5 [ 1.816503] sd 1:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB) [ 1.816638] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.816674] sd 1:0:0:0: [sdb] Write Protect is off [ 1.816676] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.816703] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.816708] sd 0:0:0:0: [sda] Write Protect is off [ 1.816711] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.816732] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.816866] sdb: [ 1.816898] sda: sda1 sda2 sda3 [ 1.826467] sdb1 [ 1.826942] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.841108] usb 2-3: New USB device found, idVendor=0424, idProduct=2228 [ 1.841111] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.841113] usb 2-3: Product: Flash Card Reader [ 1.841114] usb 2-3: Manufacturer: Generic [ 1.841116] usb 2-3: SerialNumber: 000022272228 [ 1.841188] usb 2-3: configuration #1 chosen from 1 choice [ 1.845895] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.032069] usb 5-1: new low speed USB device using ohci_hcd and address 2 [ 2.151863] Initializing USB Mass Storage driver... [ 2.151948] scsi10 : SCSI emulation for USB Mass Storage devices [ 2.152004] usbcore: registered new interface driver usb-storage [ 2.152006] USB Mass Storage support registered. [ 2.152109] usb-storage: device found at 3 [ 2.152110] usb-storage: waiting for device to settle before scanning [ 2.201105] usb 5-1: New USB device found, idVendor=046d, idProduct=c046 [ 2.201108] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.201110] usb 5-1: Product: USB Optical Mouse [ 2.201112] usb 5-1: Manufacturer: Logitech [ 2.201192] usb 5-1: configuration #1 chosen from 1 choice [ 2.210614] usbcore: registered new interface driver hiddev [ 2.216324] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input0 [ 2.216376] generic-usb 0003:046D:C046.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-1/input0 [ 2.216393] usbcore: registered new interface driver usbhid [ 2.216395] usbhid: v2.6:USB HID core driver [ 2.464527] usb 7-1: new low speed USB device using ohci_hcd and address 2 [ 2.479395] PM: Starting manual resume from disk [ 2.479398] PM: Resume from partition 8:2 [ 2.479399] PM: Checking hibernation image. [ 2.479618] PM: Error -22 checking image file [ 2.479620] PM: Resume from disk failed. [ 2.529732] EXT4-fs (sda3): mounted filesystem with ordered data mode [ 2.642383] usb 7-1: New USB device found, idVendor=413c, idProduct=2003 [ 2.642386] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.642388] usb 7-1: Product: Dell USB Keyboard [ 2.642389] usb 7-1: Manufacturer: Dell [ 2.642458] usb 7-1: configuration #1 chosen from 1 choice [ 2.650551] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.0/input/input1 [ 2.650590] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:16.0-1/input0 [ 4.421934] udev[410]: starting version 164 [ 4.942837] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 4.942843] ACPI: Power Button [PWRB] [ 4.942964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 4.942967] ACPI: Power Button [PWRF] [ 4.945974] processor LNXCPU:00: registered as cooling_device0 [ 4.946578] processor LNXCPU:01: registered as cooling_device1 [ 4.946836] processor LNXCPU:02: registered as cooling_device2 [ 4.955008] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 5.770039] nvidia: module license 'NVIDIA' taints kernel. [ 5.770042] Disabling lock debugging due to kernel taint [ 6.467378] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] [ 6.467436] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.715249] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.715257] nvidia 0000:01:00.0: setting latency timer to 64 [ 6.715261] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 6.715416] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.29 Wed Dec 8 12:09:09 PST 2010 [ 6.724761] Echoaudio Echo3G 0000:03:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6.724792] Echoaudio Echo3G 0000:03:08.0: firmware: requesting ea/echo3g_dsp.fw [ 6.845469] Echoaudio Echo3G 0000:03:08.0: firmware: requesting ea/loader_dsp.fw [ 6.866343] Echoaudio Echo3G 0000:03:08.0: firmware: requesting ea/3g_asic.fw [ 7.158106] usb-storage: device scan complete [ 7.162419] scsi 10:0:0:0: Direct-Access Generic Flash HS-CF 3.95 PQ: 0 ANSI: 0 [ 7.166068] scsi 10:0:0:1: Direct-Access Generic Flash HS-MS 3.95 PQ: 0 ANSI: 0 [ 7.169817] scsi 10:0:0:2: Direct-Access Generic Flash HS-SM 3.95 PQ: 0 ANSI: 0 [ 7.173567] scsi 10:0:0:3: Direct-Access Generic Flash HS-SD/MMC 3.95 PQ: 0 ANSI: 0 [ 7.240795] sd 10:0:0:3: [sdf] Attached SCSI removable disk [ 7.245182] sd 10:0:0:2: [sde] Attached SCSI removable disk [ 7.249298] sd 10:0:0:0: [sdc] Attached SCSI removable disk [ 7.254051] sd 10:0:0:1: [sdd] Attached SCSI removable disk [ 8.089203] Card registered: Gina3G rev.0 (DSP56361) at 0xfd700000 irq 23 [ 8.747957] Adding 4104596k swap on /dev/sda2. Priority:-1 extents:1 across:4104596k [ 9.009378] loop: module loaded [ 9.142857] kjournald starting. Commit interval 5 seconds [ 9.142872] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 9.143111] EXT3 FS on sdb1, internal journal [ 9.143116] EXT3-fs: mounted filesystem with ordered data mode. [ 9.807821] r8169: eth0: link up [ 9.807826] r8169: eth0: link up [ 11.187934] fuse init (API version 7.13) [ 17.048235] Bluetooth: Core ver 2.15 [ 17.048282] NET: Registered protocol family 31 [ 17.048284] Bluetooth: HCI device and connection manager initialized [ 17.048286] Bluetooth: HCI socket layer initialized [ 17.195080] Bluetooth: L2CAP ver 2.14 [ 17.195082] Bluetooth: L2CAP socket layer initialized [ 17.246471] Bluetooth: RFCOMM TTY layer initialized [ 17.246484] Bluetooth: RFCOMM socket layer initialized [ 17.246486] Bluetooth: RFCOMM ver 1.11 [ 17.388061] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.388063] Bluetooth: BNEP filters: protocol multicast [ 17.436390] Bridge firewalling registered [ 17.907236] Bluetooth: SCO (Voice Link) ver 0.6 [ 17.907238] Bluetooth: SCO socket layer initialized [ 19.206442] lp: driver loaded but no devices found [ 19.403314] ppdev: user-space parallel port driver [ 19.439753] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff [ 19.439759] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff [ 19.439761] parport 0x378: You gave this address, but there is probably no parallel port there! [ 19.439786] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 19.536203] lp0: using parport0 (interrupt-driven). [ 19.636039] powernow-k8: Found 1 AMD Athlon(tm) II X3 440 Processor processors (3 cpu cores) (version 2.20.00) [ 19.636074] powernow-k8: 0 : pstate 0 (3000 MHz) [ 19.636076] powernow-k8: 1 : pstate 1 (2300 MHz) [ 19.636077] powernow-k8: 2 : pstate 2 (1800 MHz) [ 19.636079] powernow-k8: 3 : pstate 3 (800 MHz) [ 19.836546] eth0: no IPv6 routers present [ 21.329225] vboxdrv: Found 3 processor cores. [ 21.329415] vboxdrv: fAsync=0 offMin=0xae2 offMax=0x35c6 [ 21.329503] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 21.329510] vboxdrv: Successfully loaded version 4.0.2 (interface 0x00160000). [ 28.239064] CPU0 attaching NULL sched-domain. [ 28.239075] CPU1 attaching NULL sched-domain. [ 28.239082] CPU2 attaching NULL sched-domain. [ 28.288702] CPU0 attaching sched-domain: [ 28.288711] domain 0: span 0-2 level MC [ 28.288719] groups: 0 1 2 [ 28.288732] CPU1 attaching sched-domain: [ 28.288737] domain 0: span 0-2 level MC [ 28.288743] groups: 1 2 0 [ 28.288752] CPU2 attaching sched-domain: [ 28.288757] domain 0: span 0-2 level MC [ 28.288763] groups: 2 0 1 [ 857.204131] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 857.337601] usb 1-2: New USB device found, idVendor=04e8, idProduct=328d [ 857.337611] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 857.337618] usb 1-2: Product: ML-2850 Series [ 857.337623] usb 1-2: Manufacturer: Samsung Electronics Co., Ltd. [ 857.337628] usb 1-2: SerialNumber: 4Q21BKDZ101983H [ 857.337842] usb 1-2: configuration #1 chosen from 1 choice [ 857.405981] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x328D [ 857.406028] usbcore: registered new interface driver usblp [ 858.635997] usb 1-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1