[sane-devel] DevCom Black Widow 9636 HiRes (SCSI Scanner)
Wed, 25 Jul 2001 20:40:26 +0100
It looks like the Blackwidow scanner has had its SCSI vendor and product ID
changed. You can get the artec backend to 'pretend' that a scanner it finds
has a different vendor/product ID - see the sane-artec man page. Basically,
you need to add the following lines to artec.conf just before the device
line that applies to your scanner:
You might want to add the device name that corresponds to your scanner.
Hope this helps
----- Original Message -----
From: "Roger L.S. Griffiths BSc (Hons)" <email@example.com>
To: "Simon Munton" <firstname.lastname@example.org>
Sent: Wednesday, July 25, 2001 1:22 AM
Subject: Re: [sane-devel] DevCom Black Widow 9636 HiRes (SCSI Scanner)
On Tuesday 24 July 2001 21:05, Simon Munton wrote:
> Hi Roger,
> Having had a look through the the driver off the Blackwidow site, I think
> you'll find that this scanner is made by Artec, model AT12. Try the Artec
> backend. It lists the AT12 as fully working.
Tried it, but get "invalid argument" as an error.
find-scanner discovers it as " Flatbed Scanner 3.20" but
scanimage/xscanimage/xsane say there are no scanners!
Roger L.S. Griffiths, BSc (Hons)
Gott würfelt nicht (God does not play dice)
- Albert Einstein