[sane-devel] Trust 19200 USB mustek: I don't have /dev/usb/scanner

[Sander van Geloven]

Hi,

I downloaded the sane backend and the mustek_usb part, build and
installed it, but it doens't work since I'dont't have a
/dev/usb/scanner*

What shoud I do?

Here is some more info that might help:

[root@ibb0197 indy]# more /proc/bus/usb/
001      devices  drivers
[root@ibb0197 indy]# more /proc/bus/usb/devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=e000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=05d8 ProdID=4002 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=496mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms

[root@ibb0197 indy]# more /etc/fstab
/dev/hda1 / ext2 defaults 1 1
none /dev/pts devpts mode=0620 0 0
none /dev/shm tmpfs defaults 0 0
/dev/hda5 /home ext2 defaults 1 2
/dev/scd0 /mnt/cdrom auto
user,iocharset=iso8859-1,exec,codepage=850,ro,noauto 0 0
/dev/fd0 /mnt/floppy auto
user,iocharset=iso8859-1,sync,exec,codepage=850,noauto 0 0
none /proc proc defaults 0 0
/dev/hda6 swap swap defaults 0 0

[root@ibb0197 indy]# scanimage -d mustek_usb
scanimage: open of device mustek_usb failed: Invalid argument

[root@ibb0197 root]# more /proc/bus/usb/drivers
         usbdevfs
         hub

How do I make a correct node in /dev/usb and what are theexact steps for
it.

Thanks,

Sander