[sane-devel] sane-find-scanner vs. scanimage --list-devices?

[Peter Kirchgessner]

Hi Steven,

now the backend is talking to the scanner. But it is getting some
problems with the communication. Some new Linux kernels have a bug. Add
to your hp.conf-file below the /dev/scanner a line

option disable-scsi-request

Maybe this can solve the final problem.

--Peter

Steven Lembark wrote:
<snip> 
> root@dizzy:bin # export LD_LIBRARY_PATH='/opt/sane/1.0.6/lib/sane';
> 
> root@dizzy:bin # ./scanimage
> [sanei_debug] Setting debug level of dll to 255.
> [dll] sane_init: SANE dll backend version 1.0.4 from sane-backends-1.0.6
> [dll] add_backend: adding backend hp
> [dll] load: loading backend hp
> [dll] load: dlopen()ing `/opt/sane/1.0.6/lib/sane/libsane-hp.so.1'
> [dll] init: initializing backend `hp'
> [sanei_debug] Setting debug level of hp to 17.
> [hp] sane_init called
> [hp] sane_init will finish with Success
> [dll] init: backend `hp' is version 1.0.8
> [hp] sane_open called
> [hp] hp_read_config: hp backend v0.95 starts reading config file
> [hp] hp_get_dev: New device /dev/scanner, connect-scsi, scsi-request=1
> [hp] sanei_hp_device_new: /dev/scanner
> [hp] scsi_inquire: sending INQUIRE
> [hp] scsi_new: sending TEST_UNIT_READY
> [hp] scsi_flush: writing 2 bytes:
> [hp]  0x0000  1B 45                                            .E
> [hp] scsi_flush: writing 7 bytes:
> [hp]  0x0000  1B 2A 73 32 35 37 45                             .*s257E
> [hp] scl_inq: read failed (Error during device I/O)
> [hp] scl_errcheck: Can't read SCL error stack: Error during device I/O
> [hp] sanei_hp_device_new: SCL reset failed
> [hp] scsi_close: closing fd 3
> [hp] hp_device_info_get: device /dev/scsi/host2/bus0/target1/lun0/generic
> not configured. Using default
> [hp] hp_get_dev: New device /dev/scsi/host2/bus0/target1/lun0/generic,
> connect-scsi, scsi-request=1
> [hp] sanei_hp_device_new: /dev/scsi/host2/bus0/target1/lun0/generic
> [hp] scsi_inquire: sending INQUIRE
> [hp] scsi_new: sending TEST_UNIT_READY
> [hp] scsi_flush: writing 2 bytes:
> [hp]  0x0000  1B 45                                            .E
> [hp] scsi_flush: writing 7 bytes:
> [hp]  0x0000  1B 2A 73 32 35 37 45                             .*s257E
> [hp] scl_inq: read failed (Error during device I/O)
> [hp] scl_errcheck: Can't read SCL error stack: Error during device I/O
> [hp] sanei_hp_device_new: SCL reset failed
> [hp] scsi_close: closing fd 3
> scanimage: open of device hp:/dev/scsi/host2/bus0/target1/lun0/generic
> failed: Error during device I/O
> [dll] sane_exit: exiting
> [dll] sane_exit: calling backend `hp's exit function
> [hp] sane_exit called
> [hp] sane_exit will finish
> 
> Any suggestions on handling this?
> 
> Suggestion: Add a "--sane-libs" switch to sane-config that prints
> out where scanimage expects the lib's to be.
> 
> thanx.
> 
> --
> Steven Lembark                               2930 W. Palmer
> Workhorse Computing                       Chicago, IL 60647
>                                             +1 800 762 1582
> _______________________________________________
> Sane-devel mailing list
> Sane-devel@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel

-- 
Peter Kirchgessner
http://www.kirchgessner.net
mailto:peter@kirchgessner.net
(alternate e-mail: pkirchgessner@t-online.de)