[sane-devel] "no sane devices found"
Thu, 27 Sep 2001 09:27:24 +0200
On Wed, Sep 26, 2001 at 02:20:23PM -0700, Mark S Parrish wrote:
> An interesting thing is happening. When I start xsane, it says something
> like "xsane: no devices available." Just for grins I did a:
I had the same problem with xsane not finding the device.
There is a file in the xsane distribution named xsane.PROBLEMS and
Study these file.
- For sane-1.0.1 you have to edit /etc/ld.so.conf and add a line with the path to the
libraries (normally /usr/local/lib/sane), then call ldconfig.
THIS MUST BE DONE AS ROOT!
- For sane-1.0.2 (and later versions) the path to the xsane libs MUST NOT be listed
My ld.so.conf: (Redhat 6.1)
> [root@msp mark]# sane-find-scanner
> # Note that sane-find-scanner will find any scanner that is connected
> # to a SCSI bus. It will even find scanners that are not supported
> # at all by SANE. It won't find a scanner that is connected to a
> # parallel, USB or other non-SCSI port.
> sane-find-scanner: found processor "HP C7670A 3945" at device /dev/sg0
> sane-find-scanner: found processor "HP C7670A 3945" at device /dev/sga
> It took almost a full minute to come back with the above 2 lines. I am also
> wondering why it is listed twice.
That it is listed twice is normal, I believe, since the devices are links.
With me here I get:
sane-find-scanner: found SCSI scanner "SCANNER 1.11" at device /dev/scanner
sane-find-scanner: found SCSI scanner "SCANNER 1.11" at device /dev/sg0
sane-find-scanner: found SCSI scanner "SCANNER 1.11" at device /dev/sga
> Then I executed xsane again and it gave me the "xsane: no devices
> available" ONCE. The second time I executed xsane it started just fine. It
Hmm. I did read this before I made the notes above. Is your SCSI
connection OK? Termination etc.?
> is almost like I have to kick it to get it started. Can anyone tell me why?
Chris Christoph P. U. Kukulies email@example.com