[sane-devel] HP 4400C Scanner support

Peter Kirchgessner peter at kirchgessner.net
Thu Sep 13 03:09:49 BST 2001


Hi Randolph,

Hewlett Packard says that they "cannot release any protocol
documentation for
the non-SCL scanners". And usually the new scanners which only have a
USB or parallel port interface are non-SCL scanners (SCL is HPs Scanner
Control Language).
These new scanners may be manufactured by other companies (like Avision)
and then labeled by HP. So knowing who "really" manufactured the scanner
could be helpful.
To find out the manufacturer, the vendor id used by USB can be used.
Or if the scanner has a FCC-id on it, you can have a look at
http://www.fcc.gov/oet/fccid/ to whome it may belong. Maybe this company
can give some specifications. But most likely they will not.

--Peter

Randolph Chung wrote:
> 
> Hi folks,
> 
> I recently acquired a HP 4400c scanner (USB). Haven't had much luck
> getting it to work with either the generic hp backend or the hp4200
> backend. Has anyone else gotten this to work? If there's no current
> support for this device I'd be interested in getting it to work... any
> pointers on how to get hw documentation to do this will be much
> appreciated.
> 
> thanks,
> randolph
> --
>    @..@                                         http://www.TauSq.org/
>   (----)
>  ( >__< )
>  ^^ ~~ ^^
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel

-- 
Peter Kirchgessner
http://www.kirchgessner.net
mailto:peter at kirchgessner.net
(alternate e-mail: pkirchgessner at t-online.de)




More information about the sane-devel mailing list