[sane-devel] New Epson Scanners
Karl Heinz Kremer
Mon, 19 Aug 2002 20:05:56 -0400
Content-Type: text/plain; charset=us-ascii
YOu can try to get some debugging output:
Then run your frontend and redirect the output:
xsane > /tmp/scan.log 2>&1
This should tell us if the scanner does actually communicate with
BTW: the desc files in doc/description are only used to generate
the "Supported Scanners" page at www.mostang.com.
On Tue, Aug 20, 2002 at 02:02:09AM +0200, Till Kamppeter wrote:
> When I use the "epson" backend for the Perfection 660, after some=20
> minutes of waiting I get
> [ epson ] error in receive - status =3D 5
> [ epson ] ident failed
> on the console from which I have started "xsane".
> I have already added the new models to doc/description/epson.desc and=20
> recompiled sane-backends. Are other modifications needed?
> Karl Heinz Kremer wrote:
> >On Mon, Aug 19, 2002 at 10:56:01PM +0200, Till Kamppeter wrote:
> >>Has anyone any idea how to get the Perfection 660 working? Does it need=
> >>any parameters in /etc/sane.d/epson.conf? Is it a relabeled scanner for=
> >>another manufacturer, so that it scans with another driver? Or is it an=
> >>absolute "Paperweight", a "winscanner".
> >Try the Plustek backend. It is based on the Perfection 1250, which also
> >is supported by the Plustek backend.
> >Karl Heinz
Karl Heinz Kremer email@example.com
PGP Key at http://www.khk.net/download/khk.asc
EPSON Sane Backend: http://www.khk.net
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
-----END PGP SIGNATURE-----