[sane-devel] Mustek 600IICD

yardbird frbiscani at libero.it
Tue Aug 13 11:49:45 BST 2002


Hi all,

I have a problem with my scanner, an old Mustek 600IICD. I think it is more a 
SCSI issue, forgive me if I am off topic but  I could not find any solution.

I'd like to connect the scanner to an Adaptec 2910 PCI SCSI controller. The 
scanner ships with an ISA controller (detected by the kernel with the gNCR 
module) which I don't want to use, for the reasons exposed in 'man 
sane-scsi'. The scanner has two connectors: the firse looks like a parallel 
port and must be used  with the ISA controller, the second is a small 
standard scsi connector, like the external connector on the adaptec board. 
When I plug the scanner in the PCI adapter I can see the device, and I can 
also use it with sane. The problem is that it works very slowly and freezes 
the machine while in use. A friend of mine told me this could be a 
termination issue; when I use the scanner without termination and with 
Windows and the ISA adapter, though, everything works fine (is this because 
the ISA adapter is built to accept just a periphal and thus does not need 
termination?). So the questions are:

1) can this be a termination problem?
2) if I have to terminate the scanner, can I terminate it on the other 
connector, the one which looks like a parallel port (and what kind of scsi 
connection is that)? I have no other switches on the scanner, just the scsi 
id selector;
3) are there any parameters I should pass to insmod when loading aic7xxx.o 
(the scsi adapter module)?

Thanks for your assistance, your help is really appreciated. Please answer by 
mail since I am not subscribed to the list.

francesco



More information about the sane-devel mailing list