[sane-devel] [Fwd: still looking for this scanner with SANE]
paul beard
paulbeard@mac.com
Sat, 16 Feb 2002 08:03:49 -0800
sent this from unsubscribed address . . . .
-------- Original Message --------
Subject: still looking for this scanner with SANE
Date: Fri, 15 Feb 2002 23:15:04 -0800
From: paul <pkdb1@attbi.com>
To: sane-devel@mostang.com
I have recompiled my kernel to remove the ss0 device, replacing it
with uk0, as I recall reading somewhere. But I'm still stuck with
the OS seeing it and SANE not. below you can see ktruss output
from scsictl, probing and identifying the device and
sane-find-scanner not being able to.
[/home/paul]# ktruss scsictl uk0 identify
= 0
1017 ktruss emul(netbsd)
1017 ktruss execve("/usr/home/paul/bin/scsictl", 0x7fffe9b8,
0x7fffe9c8) Err#2 ENOENT
1017 ktruss execve("/bin/scsictl", 0x7fffe9b8, 0x7fffe9c8)
Err#2 ENOENT
1017 ktruss execve("/sbin/scsictl", 0x7fffe9b8, 0x7fffe9c8)
JUSTRETURN
1017 scsictl emul(netbsd)
1017 scsictl __sysctl(0x7fffe918, 0x2, 0x7fffe920, 0x7fffe924,
0, 0) = 0
1017 scsictl open("uk0", 0x2, 0x7fffe920) Err#2 ENOENT
1017 scsictl open("uk0c", 0x2, 0x1) Err#2 ENOENT
1017 scsictl open("/dev/ruk0", 0x2, 0x1) Err#2 ENOENT
1017 scsictl open("/dev/ruk0c", 0x2, 0x1) Err#2 ENOENT
1017 scsictl __sysctl(0x7fffe918, 0x2, 0x7fffe920, 0x7fffe924,
0, 0) = 0
1017 scsictl open("uk0", 0x2, 0x7fffe920) Err#2 ENOENT
1017 scsictl open("uk0c", 0x2, 0x1) Err#2 ENOENT
1017 scsictl open("/dev/uk0", 0x2, 0x1) = 3
,_IOW('Q',0x4,0x10) 1017 scsictl ioctl(0x3, 0x1851cfc)
= 0
,_IOWR('Q',0x1,0x60) 1017 scsictl ioctl(0x3, 0x7fffe7b8)
= 0
/dev/uk0: scsibus0 target 2 lun 0 <UMAX, Astra 1200S, V2.7>
1017 scsictl __fstat13(0x1, 0x7fffe498) = 0
1017 scsictl __sysctl(0x7fffe498, 0x2, 0x7fffe4a0, 0x7fffe4a4,
0, 0) = 0
1017 scsictl "/etc/malloc.conf" Err#2 ENOENT
1017 scsictl mmap(0, 0x1000, 0x3, 0x1002, 0xffffffff, 0, 0, 0)
= 1099235328
1017 scsictl break(0x185211c) = 0
1017 scsictl break(0x185211c) = 0
1017 scsictl break(0x1854000) = 0
1017 scsictl break(0x1854000) = 0
1017 scsictl break(0x1864000) = 0
1017 scsictl ioctl(0x1, TIOCGETA, 0x7fffe4e8) = 0
1017 scsictl write(0x1, 0x1854000, 0x3c) = 60
"/dev/uk0: scsibus0 target 2 lun 0 <UMAX, Astra 1200S,
V2.7>\n"
1017 scsictl exit(0)
[/home/paul]# ktruss sane-find-scanner /dev/uk0
= 0
1097 ktruss emul(netbsd)
1097 ktruss execve("/usr/home/paul/bin/sane-find-scanner",
0x7fffe9b8, 0x7fffe9c4) Err#2 ENOENT
1097 ktruss execve("/bin/sane-find-scanner", 0x7fffe9b8,
0x7fffe9c4) Err#2 ENOENT
1097 ktruss execve("/sbin/sane-find-scanner", 0x7fffe9b8,
0x7fffe9c4) Err#2 ENOENT
1097 ktruss execve("/usr/bin/sane-find-scanner", 0x7fffe9b8,
0x7fffe9c4) Err#2 ENOENT
1097 ktruss execve("/usr/sbin/sane-find-scanner", 0x7fffe9b8,
0x7fffe9c4) Err#2 ENOENT
1097 ktruss execve("/usr/X11R6/bin/sane-find-scanner",
0x7fffe9b8, 0x7fffe9c4) Err#2 ENOENT
1097 ktruss "/usr/libexec/ld.elf_so" JUSTRETURN
1097 sane-find-scanne emul(netbsd)
1097 sane-find-scanne __sysctl(0x7fffe788, 0x2, 0x41855f60,
0x7fffe790, 0, 0) = 0
1097 sane-find-scanne mmap(0, 0x8000, 0x3, 0x1002, 0xffffffff,
0, 0, 0) = 1099268096
1097 sane-find-scanne geteuid = 0
1097 sane-find-scanne getuid = 0
1097 sane-find-scanne getegid = 0
1097 sane-find-scanne getgid = 0
1097 sane-find-scanne open("/etc/ld.so.conf", 0, 0x418535c8)
Err#2 ENOENT
1097 sane-find-scanne __stat13("/usr/pkg/lib/libusb-0.1.so.5",
0x7fffe7a8) = 0 1097 sane-find-scanne
open("/usr/pkg/lib/libusb-0.1.so.5", 0, 0) = 3
1097 sane-find-scanne read(0x3, 0x7fffe818, 0x34) = 52
"\^?ELF\^A\^B\^A\0\0\0\0\0\0\0\0\0\0\^C\0\^T\0\0\0\^A\0\0\^S\^P\0\0"
1097 sane-find-scanne close(0x3) = 0
1097 sane-find-scanne open("/usr/pkg/lib/libusb-0.1.so.5", 0,
0) = 3
1097 sane-find-scanne __fstat13(0x3, 0x7fffe828) = 0
1097 sane-find-scanne read(0x3, 0x7fffd7c0, 0x1000) = 4096
1097 sane-find-scanne mmap(0, 0x45000, 0x5, 0x2, 0x3, 0, 0, 0)
= 1099300864
1097 sane-find-scanne mmap(0x418a3000, 0x2000, 0x7, 0x12, 0x3,
0, 0, 0x3000) = 1099575296
1097 sane-find-scanne mmap(0x418a5000, 0, 0x7, 0x1012,
0xffffffff, 0, 0, 0) = 1099583488
1097 sane-find-scanne munmap(0x41864000, 0x3f000) = 0
1097 sane-find-scanne close(0x3) = 0
1097 sane-find-scanne __stat13("/usr/pkg/lib/libm.so.0",
0x7fffe7a8) Err#2 ENOENT
1097 sane-find-scanne __stat13("/usr/lib/libm.so.0",
0x7fffe7a8) = 0
1097 sane-find-scanne open("/usr/lib/libm.so.0", 0, 0) = 3
1097 sane-find-scanne read(0x3, 0x7fffe818, 0x34) = 52
"\^?ELF\^A\^B\^A\0\0\0\0\0\0\0\0\0\0\^C\0\^T\0\0\0\^A\0\0\134l\0\0\000"
1097 sane-find-scanne close(0x3) = 0
1097 sane-find-scanne open("/usr/lib/libm.so.0", 0, 0) = 3
1097 sane-find-scanne __fstat13(0x3, 0x7fffe828) = 0
1097 sane-find-scanne read(0x3, 0x7fffd7c0, 0x1000) = 4096
1097 sane-find-scanne mmap(0, 0x60000, 0x5, 0x2, 0x3, 0, 0, 0)
= 1099583488
1097 sane-find-scanne mmap(0x418ff000, 0x6000, 0x7, 0x12, 0x3,
0, 0, 0x1a000) = 1099952128
1097 sane-find-scanne mmap(0x41905000, 0, 0x7, 0x1012,
0xffffffff, 0, 0, 0) = 1099976704
1097 sane-find-scanne munmap(0x418c0000, 0x3f000) = 0
1097 sane-find-scanne close(0x3) = 0
1097 sane-find-scanne __stat13("/usr/pkg/lib/libjpeg.so.62",
0x7fffe7a8) = 0
1097 sane-find-scanne open("/usr/pkg/lib/libjpeg.so.62", 0, 0) = 3
1097 sane-find-scanne read(0x3, 0x7fffe818, 0x34) = 52
"\^?ELF\^A\^B\^A\0\0\0\0\0\0\0\0\0\0\^C\0\^T\0\0\0\^A\0\0/\M-$\0\0\000"
1097 sane-find-scanne close(0x3) = 0
1097 sane-find-scanne open("/usr/pkg/lib/libjpeg.so.62", 0, 0) = 3
1097 sane-find-scanne __fstat13(0x3, 0x7fffe828) = 0
1097 sane-find-scanne read(0x3, 0x7fffd7c0, 0x1000) = 4096
1097 sane-find-scanne mmap(0, 0x62000, 0x5, 0x2, 0x3, 0, 0, 0)
= 1099976704
1097 sane-find-scanne mmap(0x41963000, 0x3000, 0x7, 0x12, 0x3,
0, 0, 0x1e000) = 1100361728
1097 sane-find-scanne mmap(0x41966000, 0x1000, 0x7, 0x1012,
0xffffffff, 0, 0, 0) = 1100374016
1097 sane-find-scanne munmap(0x41924000, 0x3f000) = 0
1097 sane-find-scanne close(0x3) = 0
1097 sane-find-scanne __stat13("/usr/pkg/lib/libc.so.12",
0x7fffe7a8) Err#2 ENOENT
1097 sane-find-scanne __stat13("/usr/lib/libc.so.12",
0x7fffe7a8) = 0
1097 sane-find-scanne open("/usr/lib/libc.so.12", 0, 0) = 3
1097 sane-find-scanne read(0x3, 0x7fffe818, 0x34) = 52
"\^?ELF\^A\^B\^A\0\0\0\0\0\0\0\0\0\0\^C\0\^T\0\0\0\^A\0\^A\M-`\M-x\0\0"
1097 sane-find-scanne close(0x3) = 0
1097 sane-find-scanne open("/usr/lib/libc.so.12", 0, 0) = 3
1097 sane-find-scanne __fstat13(0x3, 0x7fffe828) = 0
1097 sane-find-scanne read(0x3, 0x7fffd7c0, 0x1000) = 4096
1097 sane-find-scanne mmap(0, 0xec000, 0x5, 0x2, 0x3, 0, 0, 0)
= 1100378112
1097 sane-find-scanne mmap(0x41a39000, 0xd000, 0x7, 0x12, 0x3,
0, 0, 0x92000) = 1101238272
1097 sane-find-scanne mmap(0x41a46000, 0xd000, 0x7, 0x1012,
0xffffffff, 0, 0, 0) = 1101291520
1097 sane-find-scanne munmap(0x419fa000, 0x3f000) = 0
1097 sane-find-scanne close(0x3) = 0
1097 sane-find-scanne __sysctl(0x41854274, 0x2, 0x41855f54,
0x7fffe8a8, 0, 0) = 0
1097 sane-find-scanne __fstat13(0x1, 0x7fffa578) = 0
1097 sane-find-scanne __sysctl(0x7fffa548, 0x2, 0x7fffa550,
0x7fffa554, 0, 0) = 0
1097 sane-find-scanne "/etc/malloc.conf" Err#2 ENOENT
1097 sane-find-scanne mmap(0, 0x1000, 0x3, 0x1002, 0xffffffff,
0, 0, 0) = 1099317248
1097 sane-find-scanne break(0x1844188) = 0
1097 sane-find-scanne break(0x1844188) = 0
1097 sane-find-scanne break(0x1846000) = 0
1097 sane-find-scanne break(0x1846000) = 0
1097 sane-find-scanne break(0x1856000) = 0
1097 sane-find-scanne ioctl(0x1, TIOCGETA, 0x7fffa5c8) = 0
# Note that sane-find-scanner will find any scanner that is connected
1097 sane-find-scanne write(0x1, 0x1846000, 0x46) = 70
"# Note that sane-find-scanner will find any scanner that
is connected"
# to a SCSI bus and some scanners that are connected to the Universal
1097 sane-find-scanne write(0x1, 0x1846000, 0x46) = 70
"# to a SCSI bus and some scanners that are connected to
the Universal"
# Serial Bus (USB) depending on your OS. It will even find scanners
1097 sane-find-scanne write(0x1, 0x1846000, 0x44) = 68
"# Serial Bus (USB) depending on your OS. It will even
find scanners\n"
# that are not supported at all by SANE. It won't find a scanner that
1097 sane-find-scanne write(0x1, 0x1846000, 0x46) = 70
"# that are not supported at all by SANE. It won't find a
scanner that"
# is connected to a parallel or proprietary port.
1097 sane-find-scanne write(0x1, 0x1846000, 0x32) = 50
"# is connected to a parallel or proprietary port.\n"
1097 sane-find-scanne write(0x1, 0x1846000, 0x1) = 1
"\n"
1097 sane-find-scanne getuid = 0
1097 sane-find-scanne open("/dev/uk0", 0x802, 0x15) = 3
1097 sane-find-scanne break(0x1856000) = 0
1097 sane-find-scanne break(0x1857000) = 0
,_IOWR('Q',0x1,0x60) 1097 sane-find-scanne ioctl(0x3, 0x7fffa7f8)
= 0
,_IOWR('Q',0x1,0x60) 1097 sane-find-scanne ioctl(0x3, 0x7fffa7f8)
= 0
sane-find-scanner: found SCSI scanner " " at device /dev/uk0
1097 sane-find-scanne write(0x1, 0x1846000, 0x3e) = 62
"sane-find-scanner: found SCSI scanner " " at device
/dev/uk0\n"
1097 sane-find-scanne close(0x3) = 0
1097 sane-find-scanne open("/dev/uk0", 0x2, 0x14) = 3
sane-find-scanner: found USB scanner (UNKNOWN vendor and product)
at device /dev/uk0
1097 sane-find-scanne write(0x1, 0x1846000, 0x55) = 85
"sane-find-scanner: found USB scanner (UNKNOWN vendor and
product) at "
1097 sane-find-scanne close(0x3) = 0
1097 sane-find-scanne write(0x1, 0x1846000, 0x1) = 1
"\n"
# `UNKNOWN vendor and product' means that there seems to be a scanner
1097 sane-find-scanne write(0x1, 0x1846000, 0x46) = 70
"# `UNKNOWN vendor and product' means that there seems to
be a scanner"
# at this device file but the vendor and product ids couldn't be
1097 sane-find-scanne write(0x1, 0x1846000, 0x42) = 66
"# at this device file but the vendor and product ids
couldn't be \n"
# identified. Currently identification only works with Linux versions
1097 sane-find-scanne write(0x1, 0x1846000, 0x46) = 70
"# identified. Currently identification only works with
Linux versions"
# >= 2.4.8.
1097 sane-find-scanne write(0x1, 0x1846000, 0xd) = 13
"# >= 2.4.8. \n"
1097 sane-find-scanne exit(0)