[sane-devel] sane weirdness + UMAX Astra 1220 S

[Hubert Figuiere]

--=-vaBFza6dpKf+iXGyiDo4
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable

On Thu, 2002-02-28 at 23:48, paul wrote:
> sounds familiar . . .  if Abel is reading this, perhaps he can=20
> supply you with some diagnostic patches in hopes of working out=20
> how this wacky Apple hardware works.

The weird stuff is that cdrecord works nicely :-)

> Did you run this by any of the linux PPC lists or newsgroups?

Nope. I don't follow them.

BTW, I now have sane-find-scanner stuck in a loop, probably waiting for
the bus to reset.
Here is its output:
# Note that sane-find-scanner will find any scanner that is connected
# to a SCSI bus and some scanners that are connected to the Universal
# Serial Bus (USB) depending on your OS. It will even find scanners
# that are not supported at all by SANE. It won't find a scanner that
# is connected to a parallel or proprietary port.

[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_scsi] sanei_scsi_find_devices: vendor=3D(null) model=3D(null)
type=3DScanner
        bus=3D1 chan=3D0 id=3D4 lun=3D0  num=3D5
[sanei_scsi] lx_chk_id: 1,0  0,0  4,0  0,0
[sanei_scsi] lx_scan_sg: k=3D0, exclude=3D5, missed=3D0
[sanei_scsi] lx_chk_id: 1,0  0,0  4,0  0,0
[sanei_scsi] lx_scan_sg: k=3D1, exclude=3D5, missed=3D1
[sanei_scsi] lx_chk_id: 1,0  0,0  4,5  0,0
[sanei_scsi] lx_scan_sg: k=3D2, exclude=3D5, missed=3D1
[sanei_scsi] lx_chk_id: 1,1  0,0  4,0  0,0
[sanei_scsi] lx_scan_sg: k=3D3, exclude=3D5, missed=3D1
[sanei_scsi] lx_chk_id: 1,1  0,0  4,2  0,0
[sanei_scsi] lx_scan_sg: k=3D4, exclude=3D5, missed=3D1
[sanei_scsi] lx_chk_id: 1,1  0,0  4,3  0,0
[sanei_scsi] lx_scan_sg: k=3D5, exclude=3D5, missed=3D1
[sanei_scsi] lx_scan_sg: k=3D6, exclude=3D5, missed=3D1
[sanei_scsi] lx_chk_id: 1,1  0,0  4,6  0,0
[sanei_scsi] lx_scan_sg: k=3D7, exclude=3D5, missed=3D1
[sanei_scsi] lx_scan_sg: k=3D8, exclude=3D5, missed=3D2
[sanei_scsi] lx_scan_sg: k=3D9, exclude=3D5, missed=3D3
[sanei_scsi] lx_scan_sg: k=3D10, exclude=3D5, missed=3D4
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=3D131072 bytes
[sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such
device or address
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_scsi] sanei_scsi_open: SG driver version: 20140
[sanei_scsi] sanei_scsi_open_extended: using 131072 bytes as SCSI buffer
[sanei_scsi] trying to enable low level command queueing
[sanei_scsi] sanei_scsi_open: Host adapter queue depth: 3
[sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run
time
[sanei_scsi] sanei_scsi_open: low level command queueing enabled
[sanei_scsi] scsi_req_enter: entered 0x30029008
[sanei_scsi] sanei_scsi.issue: 0x30029008
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 3
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x30029008
[sanei_scsi] sanei_scsi.issue: 0x30029008
[sanei_scsi] sanei_scsi_req_wait: read 41 bytes
[sanei_scsi] scsi_req_enter: entered 0x30029008
[sanei_scsi] sanei_scsi.issue: 0x30029008
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 3
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x30029008
[sanei_scsi] sanei_scsi.issue: 0x30029008
[sanei_scsi] sanei_scsi_req_wait: read 200 bytes
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_scsi] sanei_scsi_open: SG driver version: 20140
[sanei_scsi] sanei_scsi_open_extended: using 131072 bytes as SCSI buffer
[sanei_scsi] trying to enable low level command queueing
[sanei_scsi] sanei_scsi_open: Host adapter queue depth: 3
[sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run
time
[sanei_scsi] sanei_scsi_open: low level command queueing enabled
[sanei_scsi] scsi_req_enter: entered 0x30029008
[sanei_scsi] sanei_scsi.issue: 0x30029008
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 3
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x30029008
[sanei_scsi] sanei_scsi.issue: 0x30029008
[sanei_scsi] sanei_scsi_req_wait: read 41 bytes
[sanei_scsi] scsi_req_enter: entered 0x30029008
[sanei_scsi] sanei_scsi.issue: 0x30029008
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 3
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x30029008
[sanei_scsi] sanei_scsi.issue: 0x30029008
[sanei_scsi] sanei_scsi_req_wait: read 172 bytes
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_scsi] sanei_scsi_open: SG driver version: 20140
[sanei_scsi] sanei_scsi_open_extended: using 131072 bytes as SCSI buffer
[sanei_scsi] trying to enable low level command queueing
[sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1
[sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run
time
[sanei_scsi] scsi_req_enter: entered 0x30029008
[sanei_scsi] sanei_scsi.issue: 0x30029008



Hub



--=-vaBFza6dpKf+iXGyiDo4
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQA8frUZX+4F5qVuFaMRAoSqAKClsI/+GNGIKbiUBQIWL/3dHb8xEgCgwqjK
jNjXT7QxDWQq7tI3Ph7kQs0=
=kOyn
-----END PGP SIGNATURE-----

--=-vaBFza6dpKf+iXGyiDo4--