[sane-devel] Avision 630CS wird nicht mehr gefunden ?

[Marcus Menzel]

Hi,

I'm new to this list and if there is a information source I could have looked 
up - let me know :) I tried the webpage and the archive.

My problem started one week ago, as I turned one the maschine and sane 
couldn't find my scanner. It worked on this Maschine with the same setting 
more than 6 months without any problems. I installed a newer version of sane 
(1.0.6), but this didn't fixed the problem.

May someone one this list can help me to bring the scanner back online.

The scanner is working under windows, so it isn't broken and the scsi system 
looks ok to me, the only thing are the rights on the links to the scsi 
devices, but that didn't changed (I guess).


Ciao,
	Marcus


P.S:
The things I checked:
-----------------------------------------
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: SEAGATE  Model: ST39173W         Rev: 6244
  Type:   Direct-Access                    ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
  Vendor: Traxdata Model: CDR4120          Rev: 5.0Q
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
  Vendor: IBM      Model: DDRS-39130D      Rev: DC1B
  Type:   Direct-Access                    ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
  Vendor: AVISION  Model: AV630CS          Rev: 1.20
  Type:   Scanner                          ANSI SCSI revision: 02
---------------------------------------------
cat /proc/scsi/aic7xxx/0
Adaptec AIC7xxx driver version: 6.2.1
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
.....
Channel A Target 6 Negotiation Settings
        User: 10.000MB/s transfers (10.000MHz, offset 255)
        Goal: 3.300MB/s transfers
        Curr: 3.300MB/s transfers
        Channel A Target 6 Lun 0 Settings
                Commands Queued 1
                Commands Active 0
                Command Openings 1
                Max Tagged Openings 0
                Device Queue Frozen Count 0
....
-----------------------------------------------
ls -la /dev/sg*
lr-xr-xr-x    1 root     root           36 Feb  4 17:36 sg0 -> 
scsi/host0/bus0/target0/lun0/generic
lr-xr-xr-x    1 root     root           36 Feb  4 17:36 sg1 -> 
scsi/host0/bus0/target3/lun0/generic
lr-xr-xr-x    1 root     root           36 Feb  4 17:36 sg2 -> 
scsi/host0/bus0/target4/lun0/generic
lr-xr-xr-x    1 root     root           36 Feb  4 17:36 sg4 -> 
scsi/host0/bus0/target6/lun0/generic
lr-xr-xr-x    1 root     root           36 Feb  4 17:36 sgd -> 
scsi/host0/bus0/target6/lun0/generic
-------------------------------------------------
xscanimage avision:/dev/scsi/host0/bus0/target6/lun0/generic
brings up a failed to open /dev/.../generic (or /dev/scanner or ...) invalid 
argument
-------------------------------------------------
sane-find-scanner couldn't find anything 
-------------------------------------------------
cat /etc/sane.d/saned.conf
localhost
--------------------------------------------------
cat /etc/sane.d/avision.conf
scsi AVISION
/dev/scanner
--------------------------------------------------
System:
-Mandrake 8.1 (original mandrake kernel 2.4.8-26mdksmp)
--------------------------------------------------
rpm -qa|grep sane
libsane1-devel-1.0.6-2mdk
sane-frontends-1.0.6-1mdk
sane-backends-1.0.6-2mdk
xsane-gimp-0.84-2mdk
xsane-0.84-2mdk
libsane1-1.0.6-2mdk
----------------------------------------------------