[sane-devel] hp5300c usb problem

Rene Rebe rene.rebe at gmx.net
Mon Feb 25 12:37:15 GMT 2002


Hi.

On: Mon, 25 Feb 2002 10:34:11 +0100,
    Stefan Kornhuber <stefan at kornhuber.com> wrote:
> hi!
> 
> I have the usb scanner hp5300c, kernel 2.4.16 and sane 1.0.7 (back- and 
> frontend)
> 
> the output of find-scanner is
> # Note that find-scanner will find any scanner that is connected
> # to a SCSI bus.  It will even find scanners that are not supported
> # at all by SANE. It won't find a scanner that is connected to a
> # parallel, USB or other non-SCSI port.
> 
> find-scanner: found scanner "HP ScanJet 5370C 6.00" at device /dev/scanner
> find-scanner: found scanner "HP ScanJet 5370C 6.00" at device /dev/sg2

USB and the hpusbscsi SCSI emulation seem to work properly. Good.

> the output of scanimage -L is
> 
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).

Your scanner is partially supported by the avision backend. In the
1.0.7 you have to enable the HP USB support in the backend by
specifiing optionb "allow-usb" in the
$instll-prefix/etx/sane.d/avision.conf file. This is because of the
alpha-state of the code. (For the exact spelling of the option you
might take a look in the sane-avision man-page ...)

For more info see:
http://drocklinux.dyndns.org/rene/avision

and for the latest code:
http://www.rocklinux.org/people/rene/sane

I recommend the latest source from the side - which should work quite
well for you scanner - and you do not need the allow-usb option
anymore ...

> I use the doku of http://httpd.chello.nl/~j.schoone/scanning.html.
Do not know this doc.

> But now I don't know, what I should do.
> 
> thx for all replies.

Much fun and k33p h4ck1n6
  René

-- 
René Rebe (Registered Linux user: #248718 <http://counter.li.org>)

eMail:    rene.rebe at gmx.net
          rene at rocklinux.org

Homepage: http://drocklinux.dyndns.org/rene/

Anyone sending unwanted advertising e-mail to this address will be
charged $25 for network traffic and computing time. By extracting my
address from this message or its header, you agree to these terms.




More information about the sane-devel mailing list