[sane-devel] Re: Sane-devel digest, Vol 1 #204 - 4 msgs
bache k
bache@telia.com
Mon, 21 Jan 2002 22:52:15 -0100
Linux tellus 2.4.14-xfs #1 Mon Nov 19 12:31:57 GMT+1 2001 i686 unknown
snapscan-20020110.tar.gz
sane-backends-1.0.6
xsane 0.78-1
#####################################################
1.
tellus:/home/bkw# lsmod
Module Size Used by Tainted: P
atp870u 21280 0 (unused)
scsi_mod 80120 1 [atp870u]
NVdriver 818816 14 (autoclean)
emu10k1 55328 0
ac97_codec 9568 0 [emu10k1]
tellus:/home/bkw# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: Color Model: FlatbedScanner_9 Rev: 0113
Type: Scanner ANSI SCSI revision: 02
2. sane-find-scanner gives.
sane-find-scanner: found SCSI scanner "Color FlatbedScanner_9 0113" at device /dev/sg0
3. running xsane prompts no devices avaible..
4. bkw@tellus:~/packages/tarz/scanner$ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
"cat /proc/scsi/scsi" seem to be correct..
regards
Bosse K
On Sun, 13 Jan 2002 12:01:07 -0800
sane-devel-request@mostang.com wrote:
> Send Sane-devel mailing list submissions to
> sane-devel@www.mostang.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://www.mostang.com/mailman/listinfo/sane-devel
> or, via email, send a message with subject or body 'help' to
> sane-devel-request@www.mostang.com
>
> You can reach the person managing the list at
> sane-devel-admin@www.mostang.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Sane-devel digest..."
>
>
> Today's Topics:
>
> 1. Re: Acer 620S, not workkin (Henning Meier-Geinitz)
> 2. Re: Acer 620S, not workkin (Oliver Schwartz)
> 3. Re: Acer 620S, not workkin (Henning Meier-Geinitz)
> 4. Re: Proposals for scanimage and sane-find-scanner (Henning Meier-Geinitz)
>
> --__--__--
>
> Message: 1
> Date: Sun, 13 Jan 2002 13:17:05 +0100
> From: Henning Meier-Geinitz <henning@meier-geinitz.de>
> To: sane-devel@mostang.com
> Subject: Re: [sane-devel] Acer 620S, not workkin
>
> Hi,
>
> On Sat, Jan 12, 2002 at 06:13:21PM -0100, bache k wrote:
> > ./configure works fine!
> > when I do make I get this line btw others
> > "Generating sane.ps...
> > make[1]: [sane.ps] Error 1 (ignored)"
>
> The message just means that you don't have latex installed. No
> problem, you don't need it.
>
> > after that I run make install ... and do tool/sane-find-scanner but
> > it doesnt reply any model :/
>
> Is the scanner detected by your SCSI controller? Can you see it with
> "cat /proc/scsi/scsi"?
>
> Bye,
> Henning
>
> --__--__--
>
> Message: 2
> From: Oliver Schwartz <Oliver.Schwartz@gmx.de>
> To: sane-devel@mostang.com
> Subject: Re: [sane-devel] Acer 620S, not workkin
> Date: Sun, 13 Jan 2002 13:33:50 +0100
>
> Hi,
>
> > > after that I run make install ... and do tool/sane-find-scanner but
> > > it doesnt reply any model :/
> >
> > Is the scanner detected by your SCSI controller? Can you see it with
> > "cat /proc/scsi/scsi"?
>
> Please also note that you may experience further problems if you're using the
> ACARD SCSI controller that ships with the 620s. Several people reported that
> they couldn't get their scanner to work with the ACARD card but had no
> problems once they used a different SCSI controller with better Linux support
> (e.g. NCR/Symbios).
>
> On the other hand, I also got one report from a Mandrake user that got his
> scanner to work with the ACARD controller and kernel 2.4.16.
>
> Regards,
>
> Oliver
>
> --__--__--
>
> Message: 3
> Date: Sun, 13 Jan 2002 14:46:10 +0100
> From: Henning Meier-Geinitz <henning@meier-geinitz.de>
> To: sane-devel@mostang.com
> Subject: Re: [sane-devel] Acer 620S, not workkin
>
> Hi,
>
> On Sun, Jan 13, 2002 at 01:33:50PM +0100, Oliver Schwartz wrote:
> > Please also note that you may experience further problems if you're using the
> > ACARD SCSI controller that ships with the 620s. Several people reported that
> > they couldn't get their scanner to work with the ACARD card but had no
> > problems once they used a different SCSI controller with better Linux support
> > (e.g. NCR/Symbios).
> >
> > On the other hand, I also got one report from a Mandrake user that got his
> > scanner to work with the ACARD controller and kernel 2.4.16.
>
>
> Uhh, the "famous" Acard. The is some info about this at
> http://www.meier-geinitz.de/sane/docu.html#SCSI . I don't know if it's
> still valid with newer kernels, however.
>
> Bye,
> Henning
>
>
> --__--__--
>
> Message: 4
> Date: Sun, 13 Jan 2002 16:04:30 +0100
> From: Henning Meier-Geinitz <henning@meier-geinitz.de>
> To: sane-devel@mostang.com
> Subject: Re: [sane-devel] Proposals for scanimage and sane-find-scanner
>
> Hi,
>
> On Thu, Jan 10, 2002 at 08:22:34PM +0100, abel deuring wrote:
> > I like the idea. But perhaps we could add only one option (let's call it
> > "-f"), which would need a format parameter, like so:
> >
> > for the same output as from scanimage -L:
> >
> > scanimage -f="device '%d' is a %v %m %t"
> >
> > to get the same output as with your proposal for scanimage -s:
> >
> > scanimage -f='"%d" "%v" "%m" "%t"'
> >
> > to get the same output as with your variant "scanimage -S":
> >
> > scanimage -f='DEVICE_FILE[%i]='%s'; DEVICE_VENDOR[%i]="%v";
> > DEVICE_MODEL[%i]="%m"; DEVICE_TYPE[%i]="%t"'
>
> Looks nice. Anyone has a patch? :-)
>
> Bye,
> Henning
>
>
> --__--__--
>
> _______________________________________________
> Sane-devel mailing list
> Sane-devel@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
> End of Sane-devel Digest