[sane-devel] trouble with sane-1.0.7

[Morten Arnesen]

Jost Diederichs wrote:
> 
> Try completely uninstalling sane. Make sure the lib/sane directory is gone and
> do a fresh install. There a re some previous posts on this.
> Did you upgrade using the rpm that comes with RedHat 7.3?
> 
yes i did use rpms with 7.3 
>  - Jost
> 
> On Sunday 12 May 2002 01:37 pm, Morten Arnesen wrote:
> > hi !
> >
> > i just upgraded sane to 1.0.7 and got some strange problems;
> >
> > here is output from rpm:
> > [root@server /root]# rpm -qa|grep sane
> > sane-frontends-1.0.7-2
> > sane-backends-devel-1.0.7-6
> > xsane-0.84-2
> > sane-backends-1.0.7-6
> > xsane-gimp-0.84-2
> >
> > sane-find-scanner find my scanner ok, but scanimage don't.
> >
> > my dll.conf contains "net" and "scanimage".
> >
> > my scanimage.conf contains a pointer to /dev/scanner which is a symbolic
> > link to /dev/sg3.
> >
> > output from sane-find-scanner:
> > [root@server /root]# sane-find-scanner
> > # Note that sane-find-scanner will find any scanner that is connected
> > # to a SCSI bus and some scanners that are connected to the Universal
> > # Serial Bus (USB) depending on your OS. It will even find scanners
> > # that are not supported at all by SANE. It won't find a scanner that
> > # is connected to a parallel or proprietary port.
> >
> > sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN 310 1.20" at device
> > /dev/scanner
> > sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN 310 1.20" at device
> > /dev/sg3
> > sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN 310 1.20" at device
> > /dev/sgd
> >
> > and ouput from scanimage -L:
> > [root@server /root]# scanimage -L
> >
> > No scanners were identified. If you were expecting something different,
> > check that the scanner is plugged in, turned on and detected by the
> > sane-find-scanner tool (if appropriate). Please read the documentation
> > which came with this software (README, FAQ, manpages).
> >
> > how do i correct this problems, tough i cannot find a sollution not on
> > faq nor documentation?
> _______________________________________________
> Sane-devel mailing list
> Sane-devel@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel

-- 
mvh morten LC1OCT
tlf: +47 7027 7036   fax +47 70 27 82 77