[sane-devel] please help

[Ryan]

On Friday 15 November 2002 05:17 am, you wrote:
> Hi,
>
> On Thu, Nov 14, 2002 at 08:13:58PM -0500, Ryan wrote:
> > I had xsane/sane working.  I think the last time I used it was before=
 I
> > updated to RH8 from 7.3.
>
> Which version of SANE are you using now (server + client)?

I'm running xsane .89.  And this is my output from 'rpm -qa |grep sane'
sane-backends-1.0.8-5
sane-frontends-1.0.8-4
sane-backends-devel-1.0.8-5
xsane-0.89-1

It is the same on both PCs.

> > I still works on my PC, but I can't get it to work on my second one u=
sing
> > sane's network capability.
>
> So on your first PC, the scanner is listed by scanimage -L, even as
> normal user? So the permissions are set-up correctly.

Yes, when I run scanimage -L as a normal user I get:
device `epson:/dev/usb/scanner0' is a Epson Perfection610 flatbed scanner

> > But this was all working last time I tried it.
> > At first when I fired up xsane on the second PC all I got was somethi=
ng
> > like 'no devices found'.  After I set /usr/sbin/saned to SUID root
>
> Don't do that. saned wasn't written to support that. It's too risky.
> Instead, make sure that the user saned has access to your USB device
> (probably /dev/usb/scanner0).

I don't have a user named saned.  So I should create one, then make that =
user=20
own the saned executeable, then make sure xinetd is going to run saned as=
=20
that user?

> First, make sure that the local net works: On PC 1, add localhost to
> net.conf. scanimage -L should list your scanner twice now, once
> directly and once over the net (e.g.
> net:localhost:epson:/dev/usb/scanner0). If this doesn't work, check
> your xinetd settings again.

This works.  I get:
device `epson:/dev/usb/scanner0' is a Epson Perfection610 flatbed scanner
device `net:localhost:epson:/dev/usb/scanner0' is a Epson Perfection610=20
flatbed scanner

> > I was able to
> > get past that.   But now every time I hit preview or scan on the seco=
nd
> > PC I get this error: "Failed to start scanner: Invalid argument".
> >
> > If I run scanimage I get: "scanimage: sane_start: Invalid argument".
>
> Any messages in syslog of PC 1? Maybe you can see more details when
> running with debugging enabled:
>
> SANE_DEBUG_NET=3D255 scanimage -d ... >out.pnm

This works fine.  I end up with a scanned image.

> For debugging purposes, you can also use saned stand-alone (without
> xinetd). See man saned.

If you mean 'saned -d', I get this when I run that:
[saned] main: starting debug mode (level 2)
[saned] main: bind failed: Address already in use

And when I run 'saned' it just sits there waiting for me to do something=20
somehow until I hit Ctrl+C.

Thanks for your help.

-Ryan