[sane-devel] sane and canon uscb N670U

[Cherubini Enrico]

Hi there,
sorry if this question should go in a FAQ or in a sane-user mailing
list..but I didn't find the answer in the first, and the second doesn't exist
:)

Ths USB system see my scanner, so in /proc/bus/usb/devices I get:
T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=04a9 ProdID=220d Rev= 1.00
S:  Manufacturer=Canon
S:  Product=CanoScan
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=usbscanner
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=16ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

If I try sane with export SANE_DEBUG_PLUSTEK=12
I get:
[plustek] attach (/dev/usb/scanner0, 0xbfffc5f0, (nil))
[plustek] Device configuration:
[plustek] device name  : >/dev/usb/scanner0<
[plustek] porttype     : 1
[plustek] USB-ID       : >0x04A9-0x220D<
[plustek] warmup       : -1s
[plustek] lampOff      : -1
[plustek] lampOffOnEnd : -1
[plustek] pos_x        : 0
[plustek] pos_y        : 0
[plustek] neg_x        : 0
[plustek] neg_y        : 0
[plustek] tpa_x        : 0
[plustek] tpa_y        : 0
[plustek] ---------------------
[plustek] drvopen()
[plustek] usbDev_open(/dev/usb/scanner0,0x04A9-0x220D)
[plustek] Vendor ID=0x04A9, Product ID=0x220D
[plustek] usbio_DetectLM983x
[plustek] usbio_DetectLM983x: found [plustek] LM9832/3
[plustek] No matching device found >0x04A9-0x220D<
[plustek] open failed: -1
[plustek] sane_get_devices (0xbfffe6b8, 0)
[plustek] sane_exit

and xsane dies
Anyone can help me ? do you need other info ?

-- 

Bye Enrico - Le finestre sono spiragli di finta liberta'. Scegli Linux.

Office Automation:
	The use of computers to improve efficiency in the office
	by removing anyone you would want to talk with over coffee.