[sane-devel] More on FreeBSD 4.7 RELEASE, libusb-0.1.6a, Canon N650U...

[Ryan Budge]

Hi all.
 
Well im fighting it out still.
 
1.	I recompiled my kernel and took out the uscanner driver.
 
2.	On boot I get the scanner found by ugen0
 
 
3.	Changed plustek.conf to contain : 
[usb] 0x04a9 0x2206
device libusb:001:002
 
4.	usbdevs -v gives : 
Controller /dev/usb0:
addr 1: self powered, config 1, OHCI root hub(0x0000), OPTi(0x0000), rev
1.00
 port 1 addr 2: power 500 mA, config 1, CANOSCAN N656U(0x2206),
Canon(0x04a9), rev 1.00
 port 2 powered
 
5.	scanimage -L gives :
 
[sanei_debug] Setting debug level of plustek to 255.
[plustek] Plustek backend V0.44-10, part of sane-backends 1.0.9
[plustek] >#[usb] 0x04A9 0x2206<
[plustek] >#device /dev/uscanner0<
[plustek] >#[usb] 0x04A9 0x2206<
[plustek] >[usb] 0x04a9 0x2206<
[plustek] next device is a USB device (0x04A9-0x2206)
[plustek] next device is an USB device
[plustek] >device libusb:001:002<
[plustek] Decoding device name >libusb:001:002<
[plustek] ><
[plustek] attach (libusb:001:002, 0xbfbfee38, 0x0)
[plustek] Device configuration:
[plustek] device name  : >libusb:001:002<
[plustek] porttype     : 1
[plustek] USB-ID       : >0x04A9-0x2206<
[plustek] warmup       : -1s
[plustek] lampOff      : -1
[plustek] lampOffOnEnd : -1
[plustek] skipCalibr.  : 0
[plustek] invertNegs.  : 0
[plustek] pos_x        : 0
[plustek] pos_y        : 0
[plustek] pos_shading_y: -1
[plustek] neg_x        : 0
[plustek] neg_y        : 0
[plustek] neg_shading_y: -1
[plustek] tpa_x        : 0
[plustek] tpa_y        : 0
[plustek] tpa_shading_y: -1
[plustek] red gain     : -1
[plustek] green gain   : -1
[plustek] blue gain    : -1
[plustek] red Gamma    : 1.00
[plustek] green Gamma  : 1.00
[plustek] blue Gamma   : 1.00
[plustek] gray Gamma   : 1.00
[plustek] ---------------------
[plustek] drvopen()
[plustek] usbDev_open(libusb:001:002,0x04A9-0x2206)
[plustek] open failed: -1
[plustek] sane_get_devices (0xbfbff744, 0)
 
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[plustek] sane_exit
 
 
Anyone have any more ideas ?
 
Thanks for the help.
 
Regards,
Ryan Budge
e-mail : ryan at smarthand.co.za
Mobile : +27 83 415 7926
Fax : +27 8 83 415 7926
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20021121/04f54557/attachment.htm>