[sane-devel] UMAX Astra 1200S/Linux-2.4.19 Freeze

Oliver Rauch oliver.rauch at rauch-domain.de
Wed Sep 4 17:40:40 BST 2002


Hallo David,

some people reported that it is necessary to disable SCSI bus reset
in the driver or bios of the scsi controller. May be there was a change
in the kernel driver you use.

To enable debugging do:
export SANE_DEBUG_UMAX=12
export SANE_DEBUG_SANEI_SCSI=128

you can redirect the output of the stderr with the option "2>debug.txt",
e.g.:
xsane 2>debug.txt

Bye
Oliver

David Ronis schrieb:
> 
> I'm an occasional scanner user, recently using sane-1.0.6/xsane-0.80,
> on an i686-Linux-gnu box.  I have an Umax Astra 1200S scanner and use
> the aha152x module to drive my SCSI card.  I've had this configuration
> (modulo software upgrades for years) and no hardware has been changed.
> 
> Yesterday, I tried scanning in something to fax (I used lineart).  The
> preview looked fine, but somehow the resulting (postscript) file was
> corrupted, in that part of the scan was missing.  When I switched to
> grayscale or color (again the previews were fine) the scan started,
> after a few seconds, the scanner made a funny noise and the scan
> stopped; a few seconds later the system locked up.  On reboot, there
> were a large number of doubly allocated inodes (I'd never seen fsck
> run some of the subchecks before).
> 
> I'd upgraded Linux from 2.4.18->2.4.19 since the last time I'd used
> the scanner, and figured that the problem might be with buffer-size
> declarations in some of the header files.  Accordingly, I rebuilt
> (using gcc-2.95.3) sane-1.0.8/xsane-0.87.  I get identical behavior.
> 
> Help.
> 
> David
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel

-- 
Homepage:	http://www.rauch-domain.de
sane-umax:	http://www.rauch-domain.de/sane-umax
xsane:		http://www.xsane.org
E-Mail:		mailto:Oliver.Rauch at rauch-domain.de



More information about the sane-devel mailing list